OpenCloudOS-Kernel/drivers/edac/ghes_edac.c

528 lines
14 KiB
C
Raw Normal View History

/*
* GHES/EDAC Linux driver
*
* This file may be distributed under the terms of the GNU General Public
* License version 2.
*
* Copyright (c) 2013 by Mauro Carvalho Chehab
*
* Red Hat Inc. http://www.redhat.com
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <acpi/ghes.h>
#include <linux/edac.h>
#include <linux/dmi.h>
#include "edac_core.h"
ghes_edac: Fix RAS tracing With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 08:35:41 +08:00
#include <ras/ras_event.h>
#define GHES_EDAC_REVISION " Ver: 1.0.0"
struct ghes_edac_pvt {
struct list_head list;
struct ghes *ghes;
struct mem_ctl_info *mci;
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
/* Buffers for the error handling routine */
ghes_edac: Fix RAS tracing With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 08:35:41 +08:00
char detail_location[240];
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
char other_detail[160];
char msg[80];
};
static LIST_HEAD(ghes_reglist);
static DEFINE_MUTEX(ghes_edac_lock);
static int ghes_edac_mc_num;
/* Memory Device - Type 17 of SMBIOS spec */
struct memdev_dmi_entry {
u8 type;
u8 length;
u16 handle;
u16 phys_mem_array_handle;
u16 mem_err_info_handle;
u16 total_width;
u16 data_width;
u16 size;
u8 form_factor;
u8 device_set;
u8 device_locator;
u8 bank_locator;
u8 memory_type;
u16 type_detail;
u16 speed;
u8 manufacturer;
u8 serial_number;
u8 asset_tag;
u8 part_number;
u8 attributes;
u32 extended_size;
u16 conf_mem_clk_speed;
} __attribute__((__packed__));
struct ghes_edac_dimm_fill {
struct mem_ctl_info *mci;
unsigned count;
};
static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg)
{
int *num_dimm = arg;
if (dh->type == DMI_ENTRY_MEM_DEVICE)
(*num_dimm)++;
}
static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
{
struct ghes_edac_dimm_fill *dimm_fill = arg;
struct mem_ctl_info *mci = dimm_fill->mci;
if (dh->type == DMI_ENTRY_MEM_DEVICE) {
struct memdev_dmi_entry *entry = (struct memdev_dmi_entry *)dh;
struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
mci->n_layers,
dimm_fill->count, 0, 0);
if (entry->size == 0xffff) {
pr_info("Can't get DIMM%i size\n",
dimm_fill->count);
dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */
} else if (entry->size == 0x7fff) {
dimm->nr_pages = MiB_TO_PAGES(entry->extended_size);
} else {
if (entry->size & 1 << 15)
dimm->nr_pages = MiB_TO_PAGES((entry->size &
0x7fff) << 10);
else
dimm->nr_pages = MiB_TO_PAGES(entry->size);
}
switch (entry->memory_type) {
case 0x12:
if (entry->type_detail & 1 << 13)
dimm->mtype = MEM_RDDR;
else
dimm->mtype = MEM_DDR;
break;
case 0x13:
if (entry->type_detail & 1 << 13)
dimm->mtype = MEM_RDDR2;
else
dimm->mtype = MEM_DDR2;
break;
case 0x14:
dimm->mtype = MEM_FB_DDR2;
break;
case 0x18:
if (entry->type_detail & 1 << 13)
dimm->mtype = MEM_RDDR3;
else
dimm->mtype = MEM_DDR3;
break;
default:
if (entry->type_detail & 1 << 6)
dimm->mtype = MEM_RMBS;
else if ((entry->type_detail & ((1 << 7) | (1 << 13)))
== ((1 << 7) | (1 << 13)))
dimm->mtype = MEM_RDR;
else if (entry->type_detail & 1 << 7)
dimm->mtype = MEM_SDR;
else if (entry->type_detail & 1 << 9)
dimm->mtype = MEM_EDO;
else
dimm->mtype = MEM_UNKNOWN;
}
/*
* Actually, we can only detect if the memory has bits for
* checksum or not
*/
if (entry->total_width == entry->data_width)
dimm->edac_mode = EDAC_NONE;
else
dimm->edac_mode = EDAC_SECDED;
dimm->dtype = DEV_UNKNOWN;
dimm->grain = 128; /* Likely, worse case */
/*
* FIXME: It shouldn't be hard to also fill the DIMM labels
*/
if (dimm->nr_pages) {
edac_dbg(1, "DIMM%i: %s size = %d MB%s\n",
dimm_fill->count, edac_mem_types[dimm->mtype],
PAGES_TO_MiB(dimm->nr_pages),
(dimm->edac_mode != EDAC_NONE) ? "(ECC)" : "");
edac_dbg(2, "\ttype %d, detail 0x%02x, width %d(total %d)\n",
entry->memory_type, entry->type_detail,
entry->total_width, entry->data_width);
}
dimm_fill->count++;
}
}
void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
struct cper_sec_mem_err *mem_err)
{
enum hw_event_mc_err_type type;
struct edac_raw_error_desc *e;
struct mem_ctl_info *mci;
struct ghes_edac_pvt *pvt = NULL;
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
char *p;
ghes_edac: Fix RAS tracing With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 08:35:41 +08:00
u8 grain_bits;
list_for_each_entry(pvt, &ghes_reglist, list) {
if (ghes == pvt->ghes)
break;
}
if (!pvt) {
pr_err("Internal error: Can't find EDAC structure\n");
return;
}
mci = pvt->mci;
e = &mci->error_desc;
/* Cleans the error report buffer */
memset(e, 0, sizeof (*e));
e->error_count = 1;
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
strcpy(e->label, "unknown label");
e->msg = pvt->msg;
e->other_detail = pvt->other_detail;
e->top_layer = -1;
e->mid_layer = -1;
e->low_layer = -1;
*pvt->other_detail = '\0';
*pvt->msg = '\0';
switch (sev) {
case GHES_SEV_CORRECTED:
type = HW_EVENT_ERR_CORRECTED;
break;
case GHES_SEV_RECOVERABLE:
type = HW_EVENT_ERR_UNCORRECTED;
break;
case GHES_SEV_PANIC:
type = HW_EVENT_ERR_FATAL;
break;
default:
case GHES_SEV_NO:
type = HW_EVENT_ERR_INFO;
}
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
edac_dbg(1, "error validation_bits: 0x%08llx\n",
(long long)mem_err->validation_bits);
/* Error type, mapped on e->msg */
if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_TYPE) {
p = pvt->msg;
switch (mem_err->error_type) {
case 0:
p += sprintf(p, "Unknown");
break;
case 1:
p += sprintf(p, "No error");
break;
case 2:
p += sprintf(p, "Single-bit ECC");
break;
case 3:
p += sprintf(p, "Multi-bit ECC");
break;
case 4:
p += sprintf(p, "Single-symbol ChipKill ECC");
break;
case 5:
p += sprintf(p, "Multi-symbol ChipKill ECC");
break;
case 6:
p += sprintf(p, "Master abort");
break;
case 7:
p += sprintf(p, "Target abort");
break;
case 8:
p += sprintf(p, "Parity Error");
break;
case 9:
p += sprintf(p, "Watchdog timeout");
break;
case 10:
p += sprintf(p, "Invalid address");
break;
case 11:
p += sprintf(p, "Mirror Broken");
break;
case 12:
p += sprintf(p, "Memory Sparing");
break;
case 13:
p += sprintf(p, "Scrub corrected error");
break;
case 14:
p += sprintf(p, "Scrub uncorrected error");
break;
case 15:
p += sprintf(p, "Physical Memory Map-out event");
break;
default:
p += sprintf(p, "reserved error (%d)",
mem_err->error_type);
}
} else {
strcpy(pvt->msg, "unknown error");
}
/* Error address */
if (mem_err->validation_bits & CPER_MEM_VALID_PA) {
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
e->page_frame_number = mem_err->physical_addr >> PAGE_SHIFT;
e->offset_in_page = mem_err->physical_addr & ~PAGE_MASK;
}
/* Error grain */
if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK)
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK);
/* Memory error location, mapped on e->location */
p = e->location;
if (mem_err->validation_bits & CPER_MEM_VALID_NODE)
p += sprintf(p, "node:%d ", mem_err->node);
if (mem_err->validation_bits & CPER_MEM_VALID_CARD)
p += sprintf(p, "card:%d ", mem_err->card);
if (mem_err->validation_bits & CPER_MEM_VALID_MODULE)
p += sprintf(p, "module:%d ", mem_err->module);
if (mem_err->validation_bits & CPER_MEM_VALID_RANK_NUMBER)
p += sprintf(p, "rank:%d ", mem_err->rank);
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
if (mem_err->validation_bits & CPER_MEM_VALID_BANK)
p += sprintf(p, "bank:%d ", mem_err->bank);
if (mem_err->validation_bits & CPER_MEM_VALID_ROW)
p += sprintf(p, "row:%d ", mem_err->row);
if (mem_err->validation_bits & CPER_MEM_VALID_COLUMN)
p += sprintf(p, "col:%d ", mem_err->column);
if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION)
p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos);
if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) {
const char *bank = NULL, *device = NULL;
dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device);
if (bank != NULL && device != NULL)
p += sprintf(p, "DIMM location:%s %s ", bank, device);
else
p += sprintf(p, "DIMM DMI handle: 0x%.4x ",
mem_err->mem_dev_handle);
}
ghes_edac: Make it compliant with UEFI spec 2.3.1 The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 06:24:12 +08:00
if (p > e->location)
*(p - 1) = '\0';
/* All other fields are mapped on e->other_detail */
p = pvt->other_detail;
if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_STATUS) {
u64 status = mem_err->error_status;
p += sprintf(p, "status(0x%016llx): ", (long long)status);
switch ((status >> 8) & 0xff) {
case 1:
p += sprintf(p, "Error detected internal to the component ");
break;
case 16:
p += sprintf(p, "Error detected in the bus ");
break;
case 4:
p += sprintf(p, "Storage error in DRAM memory ");
break;
case 5:
p += sprintf(p, "Storage error in TLB ");
break;
case 6:
p += sprintf(p, "Storage error in cache ");
break;
case 7:
p += sprintf(p, "Error in one or more functional units ");
break;
case 8:
p += sprintf(p, "component failed self test ");
break;
case 9:
p += sprintf(p, "Overflow or undervalue of internal queue ");
break;
case 17:
p += sprintf(p, "Virtual address not found on IO-TLB or IO-PDIR ");
break;
case 18:
p += sprintf(p, "Improper access error ");
break;
case 19:
p += sprintf(p, "Access to a memory address which is not mapped to any component ");
break;
case 20:
p += sprintf(p, "Loss of Lockstep ");
break;
case 21:
p += sprintf(p, "Response not associated with a request ");
break;
case 22:
p += sprintf(p, "Bus parity error - must also set the A, C, or D Bits ");
break;
case 23:
p += sprintf(p, "Detection of a PATH_ERROR ");
break;
case 25:
p += sprintf(p, "Bus operation timeout ");
break;
case 26:
p += sprintf(p, "A read was issued to data that has been poisoned ");
break;
default:
p += sprintf(p, "reserved ");
break;
}
}
if (mem_err->validation_bits & CPER_MEM_VALID_REQUESTOR_ID)
p += sprintf(p, "requestorID: 0x%016llx ",
(long long)mem_err->requestor_id);
if (mem_err->validation_bits & CPER_MEM_VALID_RESPONDER_ID)
p += sprintf(p, "responderID: 0x%016llx ",
(long long)mem_err->responder_id);
if (mem_err->validation_bits & CPER_MEM_VALID_TARGET_ID)
p += sprintf(p, "targetID: 0x%016llx ",
(long long)mem_err->responder_id);
if (p > pvt->other_detail)
*(p - 1) = '\0';
ghes_edac: Fix RAS tracing With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 08:35:41 +08:00
/* Generate the trace event */
grain_bits = fls_long(e->grain);
snprintf(pvt->detail_location, sizeof(pvt->detail_location),
"APEI location: %s %s", e->location, e->other_detail);
ghes_edac: Fix RAS tracing With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-20 08:35:41 +08:00
trace_mc_event(type, e->msg, e->label, e->error_count,
mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer,
PAGES_TO_MiB(e->page_frame_number) | e->offset_in_page,
grain_bits, e->syndrome, pvt->detail_location);
/* Report the error via EDAC API */
edac_raw_mc_handle_error(type, mci, e);
}
EXPORT_SYMBOL_GPL(ghes_edac_report_mem_error);
int ghes_edac_register(struct ghes *ghes, struct device *dev)
{
bool fake = false;
int rc, num_dimm = 0;
struct mem_ctl_info *mci;
struct edac_mc_layer layers[1];
struct ghes_edac_pvt *pvt;
struct ghes_edac_dimm_fill dimm_fill;
/* Get the number of DIMMs */
dmi_walk(ghes_edac_count_dimms, &num_dimm);
/* Check if we've got a bogus BIOS */
if (num_dimm == 0) {
fake = true;
num_dimm = 1;
}
layers[0].type = EDAC_MC_LAYER_ALL_MEM;
layers[0].size = num_dimm;
layers[0].is_virt_csrow = true;
/*
* We need to serialize edac_mc_alloc() and edac_mc_add_mc(),
* to avoid duplicated memory controller numbers
*/
mutex_lock(&ghes_edac_lock);
mci = edac_mc_alloc(ghes_edac_mc_num, ARRAY_SIZE(layers), layers,
sizeof(*pvt));
if (!mci) {
pr_info("Can't allocate memory for EDAC data\n");
mutex_unlock(&ghes_edac_lock);
return -ENOMEM;
}
pvt = mci->pvt_info;
memset(pvt, 0, sizeof(*pvt));
list_add_tail(&pvt->list, &ghes_reglist);
pvt->ghes = ghes;
pvt->mci = mci;
mci->pdev = dev;
mci->mtype_cap = MEM_FLAG_EMPTY;
mci->edac_ctl_cap = EDAC_FLAG_NONE;
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = "ghes_edac.c";
mci->mod_ver = GHES_EDAC_REVISION;
mci->ctl_name = "ghes_edac";
mci->dev_name = "ghes";
if (!ghes_edac_mc_num) {
if (!fake) {
pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n");
pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n");
pr_info("So, the end result of using this driver varies from vendor to vendor.\n");
pr_info("If you find incorrect reports, please contact your hardware vendor\n");
pr_info("to correct its BIOS.\n");
pr_info("This system has %d DIMM sockets.\n",
num_dimm);
} else {
pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n");
pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n");
pr_info("work on such system. Use this driver with caution\n");
}
}
if (!fake) {
ghes_edac: Don't credit the same memory dimm twice On my tests on a 4xE5-4650 CPU's system, the GHES EDAC driver is called twice. As the SMBIOS DMI enumeration call will seek for the entire DIMM sockets in the system, on this machine, equipped with 128 GB of RAM, the memory is displayed twice: +-----------------------+ | mc0 | mc1 | ----------+-----------------------+ memory45: | 8192 MB | 8192 MB | memory44: | 0 MB | 0 MB | ----------+-----------------------+ memory43: | 0 MB | 0 MB | memory42: | 8192 MB | 8192 MB | ----------+-----------------------+ memory41: | 0 MB | 0 MB | memory40: | 0 MB | 0 MB | ----------+-----------------------+ memory39: | 8192 MB | 8192 MB | memory38: | 0 MB | 0 MB | ----------+-----------------------+ memory37: | 0 MB | 0 MB | memory36: | 8192 MB | 8192 MB | ----------+-----------------------+ memory35: | 0 MB | 0 MB | memory34: | 0 MB | 0 MB | ----------+-----------------------+ memory33: | 8192 MB | 8192 MB | memory32: | 0 MB | 0 MB | ----------+-----------------------+ memory31: | 0 MB | 0 MB | memory30: | 8192 MB | 8192 MB | ----------+-----------------------+ memory29: | 0 MB | 0 MB | memory28: | 0 MB | 0 MB | ----------+-----------------------+ memory27: | 8192 MB | 8192 MB | memory26: | 0 MB | 0 MB | ----------+-----------------------+ memory25: | 0 MB | 0 MB | memory24: | 8192 MB | 8192 MB | ----------+-----------------------+ memory23: | 0 MB | 0 MB | memory22: | 0 MB | 0 MB | ----------+-----------------------+ memory21: | 8192 MB | 8192 MB | memory20: | 0 MB | 0 MB | ----------+-----------------------+ memory19: | 0 MB | 0 MB | memory18: | 8192 MB | 8192 MB | ----------+-----------------------+ memory17: | 0 MB | 0 MB | memory16: | 0 MB | 0 MB | ----------+-----------------------+ memory15: | 8192 MB | 8192 MB | memory14: | 0 MB | 0 MB | ----------+-----------------------+ memory13: | 0 MB | 0 MB | memory12: | 8192 MB | 8192 MB | ----------+-----------------------+ memory11: | 0 MB | 0 MB | memory10: | 0 MB | 0 MB | ----------+-----------------------+ memory9: | 8192 MB | 8192 MB | memory8: | 0 MB | 0 MB | ----------+-----------------------+ memory7: | 0 MB | 0 MB | memory6: | 8192 MB | 8192 MB | ----------+-----------------------+ memory5: | 0 MB | 0 MB | memory4: | 0 MB | 0 MB | ----------+-----------------------+ memory3: | 8192 MB | 8192 MB | memory2: | 0 MB | 0 MB | ----------+-----------------------+ memory1: | 0 MB | 0 MB | memory0: | 8192 MB | 8192 MB | ----------+-----------------------+ Total sum of 256 GB. As there's no reliable way to credit DIMMS to the right memory controller, just put everything on memory controller 0 (with should always exist). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-15 19:45:00 +08:00
/*
* Fill DIMM info from DMI for the memory controller #0
*
* Keep it in blank for the other memory controllers, as
* there's no reliable way to properly credit each DIMM to
* the memory controller, as different BIOSes fill the
* DMI bank location fields on different ways
*/
if (!ghes_edac_mc_num) {
dimm_fill.count = 0;
dimm_fill.mci = mci;
dmi_walk(ghes_edac_dmidecode, &dimm_fill);
}
} else {
struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
mci->n_layers, 0, 0, 0);
dimm->nr_pages = 1;
dimm->grain = 128;
dimm->mtype = MEM_UNKNOWN;
dimm->dtype = DEV_UNKNOWN;
dimm->edac_mode = EDAC_SECDED;
}
rc = edac_mc_add_mc(mci);
if (rc < 0) {
pr_info("Can't register at EDAC core\n");
edac_mc_free(mci);
mutex_unlock(&ghes_edac_lock);
return -ENODEV;
}
ghes_edac_mc_num++;
mutex_unlock(&ghes_edac_lock);
return 0;
}
EXPORT_SYMBOL_GPL(ghes_edac_register);
void ghes_edac_unregister(struct ghes *ghes)
{
struct mem_ctl_info *mci;
struct ghes_edac_pvt *pvt, *tmp;
list_for_each_entry_safe(pvt, tmp, &ghes_reglist, list) {
if (ghes == pvt->ghes) {
mci = pvt->mci;
edac_mc_del_mc(mci->pdev);
edac_mc_free(mci);
list_del(&pvt->list);
}
}
}
EXPORT_SYMBOL_GPL(ghes_edac_unregister);