OpenCloudOS-Kernel/include/linux/rpmsg.h

/*
 * Remote processor messaging
 *
 * Copyright (C) 2011 Texas Instruments, Inc.
 * Copyright (C) 2011 Google, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * * Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * * Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in
 *   the documentation and/or other materials provided with the
 *   distribution.
 * * Neither the name Texas Instruments nor the names of its
 *   contributors may be used to endorse or promote products derived
 *   from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _LINUX_RPMSG_H
#define _LINUX_RPMSG_H

#include <linux/types.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/kref.h>
#include <linux/mutex.h>

#define RPMSG_ADDR_ANY		0xFFFFFFFF

struct rpmsg_device;
struct rpmsg_endpoint;
struct rpmsg_device_ops;
struct rpmsg_endpoint_ops;

/**
 * struct rpmsg_channel_info - channel info representation
 * @name: name of service
 * @src: local address
 * @dst: destination address
 */
struct rpmsg_channel_info {
	char name[RPMSG_NAME_SIZE];
	u32 src;
	u32 dst;
};

/**
 * rpmsg_device - device that belong to the rpmsg bus
 * @dev: the device struct
 * @id: device id (used to match between rpmsg drivers and devices)
 * @driver_override: driver name to force a match
 * @src: local address
 * @dst: destination address
 * @ept: the rpmsg endpoint of this channel
 * @announce: if set, rpmsg will announce the creation/removal of this channel
 */
struct rpmsg_device {
	struct device dev;
	struct rpmsg_device_id id;
	char *driver_override;
	u32 src;
	u32 dst;
	struct rpmsg_endpoint *ept;
	bool announce;

	const struct rpmsg_device_ops *ops;
};

typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);

/**
 * struct rpmsg_endpoint - binds a local rpmsg address to its user
 * @rpdev: rpmsg channel device
 * @refcount: when this drops to zero, the ept is deallocated
 * @cb: rx callback handler
 * @cb_lock: must be taken before accessing/changing @cb
 * @addr: local rpmsg address
 * @priv: private data for the driver's use
 *
 * In essence, an rpmsg endpoint represents a listener on the rpmsg bus, as
 * it binds an rpmsg address with an rx callback handler.
 *
 * Simple rpmsg drivers shouldn't use this struct directly, because
 * things just work: every rpmsg driver provides an rx callback upon
 * registering to the bus, and that callback is then bound to its rpmsg
 * address when the driver is probed. When relevant inbound messages arrive
 * (i.e. messages which their dst address equals to the src address of
 * the rpmsg channel), the driver's handler is invoked to process it.
 *
 * More complicated drivers though, that do need to allocate additional rpmsg
 * addresses, and bind them to different rx callbacks, must explicitly
 * create additional endpoints by themselves (see rpmsg_create_ept()).
 */
struct rpmsg_endpoint {
	struct rpmsg_device *rpdev;
	struct kref refcount;
	rpmsg_rx_cb_t cb;
	struct mutex cb_lock;
	u32 addr;
	void *priv;

	const struct rpmsg_endpoint_ops *ops;
};

/**
 * struct rpmsg_driver - rpmsg driver struct
 * @drv: underlying device driver
 * @id_table: rpmsg ids serviced by this driver
 * @probe: invoked when a matching rpmsg channel (i.e. device) is found
 * @remove: invoked when the rpmsg channel is removed
 * @callback: invoked when an inbound message is received on the channel
 */
struct rpmsg_driver {
	struct device_driver drv;
	const struct rpmsg_device_id *id_table;
	int (*probe)(struct rpmsg_device *dev);
	void (*remove)(struct rpmsg_device *dev);
	int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
};

int register_rpmsg_device(struct rpmsg_device *dev);
void unregister_rpmsg_device(struct rpmsg_device *dev);
int __register_rpmsg_driver(struct rpmsg_driver *drv, struct module *owner);
void unregister_rpmsg_driver(struct rpmsg_driver *drv);
void rpmsg_destroy_ept(struct rpmsg_endpoint *);
struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_device *,
					rpmsg_rx_cb_t cb, void *priv,
					struct rpmsg_channel_info chinfo);

/* use a macro to avoid include chaining to get THIS_MODULE */
#define register_rpmsg_driver(drv) \
	__register_rpmsg_driver(drv, THIS_MODULE)

/**
 * module_rpmsg_driver() - Helper macro for registering an rpmsg driver
 * @__rpmsg_driver: rpmsg_driver struct
 *
 * Helper macro for rpmsg drivers which do not do anything special in module
 * init/exit. This eliminates a lot of boilerplate.  Each module may only
 * use this macro once, and calling it replaces module_init() and module_exit()
 */
#define module_rpmsg_driver(__rpmsg_driver) \
	module_driver(__rpmsg_driver, register_rpmsg_driver, \
			unregister_rpmsg_driver)

int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst);
int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
			  void *data, int len);

int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len);
int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst);
int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
			     void *data, int len);

#endif /* _LINUX_RPMSG_H */