OpenCloudOS-Kernel/arch/arm/boot/dts/exynos5250-smdk5250.dts

425 lines
8.5 KiB
Plaintext
Raw Normal View History

/*
* SAMSUNG SMDK5250 board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
aliases {
};
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
dbvdd: fixed-regulator@1 {
compatible = "regulator-fixed";
regulator-name = "dbvdd-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
spkvdd: fixed-regulator@2 {
compatible = "regulator-fixed";
regulator-name = "spkvdd-supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
sound {
compatible = "samsung,smdk-wm8994";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&wm8994>;
};
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
clock-frequency = <24000000>;
};
codec_mclk: codec-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <16934000>;
};
};
};
&dp {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
status = "okay";
};
&ehci {
samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
};
&fimd {
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing@0 {
/* 1280x800 */
clock-frequency = <50000>;
hactive = <1280>;
vactive = <800>;
hfront-porch = <4>;
hback-porch = <4>;
hsync-len = <4>;
vback-porch = <4>;
vfront-porch = <4>;
vsync-len = <4>;
};
};
};
&hdmi {
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
};
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
max77686@09 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "P1.0V_LDO_OUT1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "P1.2V_LDO_OUT2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "P1.8V_LDO_OUT3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "P2.8V_LDO_OUT4";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo5_reg: LDO5 {
regulator-name = "P1.8V_LDO_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo6_reg: LDO6 {
regulator-name = "P1.1V_LDO_OUT6";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "P1.8V_LDO_OUT11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo13_reg: LDO13 {
regulator-name = "P1.8V_LDO_OUT13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
&i2c_1 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12 SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA PHY. As I commented on [4/7], this branch merged pinctrl/samsung to support pinctrl for exynos4x12 without useless merge conflicts. * 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits) ARM: EXYNOS: DT Support for SATA and SATA PHY ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats ARM: dts: Add node for touchscreen for exynos4210-trats ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats ARM: dts: Add node for i2c3 bus for exynos4210-trats ARM: dts: Add nodes for GPIO keys available on Trats ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats ARM: dts: Add nodes for pin controllers for exynos4x12 pinctrl: samsung: Add support for EXYNOS4X12 gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12 ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on EXYNOS4X12 ARM: dts: add board dts file for EXYNOS4412 based SMDK board ARM: dts: Add support for EXYNOS4X12 SoCs ARM: EXYNOS: Add devicetree node for TMU driver for exynos5 ARM: EXYNOS: Add devicetree node for TMU driver for exynos4 ARM: EXYNOS: Add MFC device tree support ARM: dts: Enable serial controllers on Origen and SMDKV310 Documentation: Update samsung-pinctrl device tree bindings documentation pinctrl: samsung: Add GPIO to IRQ translation pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT ... Add/add conflicts in: arch/arm/boot/dts/exynos5250-smdk5250.dts arch/arm/boot/dts/exynos5250.dtsi arch/arm/mach-exynos/mach-exynos5-dt.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-22 03:30:32 +08:00
eeprom@51 {
compatible = "samsung,s524ad0xd1";
reg = <0x51>;
};
wm8994: wm8994@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&codec_mclk>;
clock-names = "MCLK1";
AVDD2-supply = <&vdd>;
CPVDD-supply = <&vdd>;
DBVDD-supply = <&dbvdd>;
SPKVDD1-supply = <&spkvdd>;
SPKVDD2-supply = <&spkvdd>;
};
};
&i2c_2 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
&i2c_8 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
&i2c_9 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
samsung,i2c-slave-addr = <0x38>;
sata_phy_i2c: sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};
};
&i2s0 {
status = "okay";
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
};
&mmc_0 {
status = "okay";
num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
bus-width = <8>;
cap-mmc-highspeed;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
};
&rtc {
status = "okay";
};
&sata {
status = "okay";
};
&sata_phy {
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
&spi_1 {
status = "okay";
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <1000000>;
controller-data {
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};
&pinctrl_0 {
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};