OpenCloudOS-Kernel/arch/tile/kernel/sysfs.c

194 lines
5.3 KiB
C
Raw Normal View History

arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* /sys entry support.
*/
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
#include <linux/device.h>
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/stat.h>
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
#include <hv/hypervisor.h>
/* Return a string queried from the hypervisor, truncated to page size. */
static ssize_t get_hv_confstr(char *page, int query)
{
ssize_t n = hv_confstr(query, (unsigned long)page, PAGE_SIZE - 1);
n = n < 0 ? 0 : min(n, (ssize_t)PAGE_SIZE - 1) - 1;
if (n)
page[n++] = '\n';
page[n] = '\0';
return n;
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t chip_width_show(struct device *dev,
struct device_attribute *attr,
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
char *page)
{
return sprintf(page, "%u\n", smp_width);
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(chip_width, 0444, chip_width_show, NULL);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t chip_height_show(struct device *dev,
struct device_attribute *attr,
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
char *page)
{
return sprintf(page, "%u\n", smp_height);
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(chip_height, 0444, chip_height_show, NULL);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t chip_serial_show(struct device *dev,
struct device_attribute *attr,
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
char *page)
{
return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM);
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(chip_serial, 0444, chip_serial_show, NULL);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t chip_revision_show(struct device *dev,
struct device_attribute *attr,
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
char *page)
{
return get_hv_confstr(page, HV_CONFSTR_CHIP_REV);
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(chip_revision, 0444, chip_revision_show, NULL);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t type_show(struct device *dev,
struct device_attribute *attr,
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
char *page)
{
return sprintf(page, "tilera\n");
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(type, 0444, type_show, NULL);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
#define HV_CONF_ATTR(name, conf) \
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t name ## _show(struct device *dev, \
struct device_attribute *attr, \
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
char *page) \
{ \
return get_hv_confstr(page, conf); \
} \
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(name, 0444, name ## _show, NULL);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
HV_CONF_ATTR(version, HV_CONFSTR_HV_SW_VER)
HV_CONF_ATTR(config_version, HV_CONFSTR_HV_CONFIG_VER)
HV_CONF_ATTR(board_part, HV_CONFSTR_BOARD_PART_NUM)
HV_CONF_ATTR(board_serial, HV_CONFSTR_BOARD_SERIAL_NUM)
HV_CONF_ATTR(board_revision, HV_CONFSTR_BOARD_REV)
HV_CONF_ATTR(board_description, HV_CONFSTR_BOARD_DESC)
HV_CONF_ATTR(mezz_part, HV_CONFSTR_MEZZ_PART_NUM)
HV_CONF_ATTR(mezz_serial, HV_CONFSTR_MEZZ_SERIAL_NUM)
HV_CONF_ATTR(mezz_revision, HV_CONFSTR_MEZZ_REV)
HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC)
HV_CONF_ATTR(cpumod_part, HV_CONFSTR_CPUMOD_PART_NUM)
HV_CONF_ATTR(cpumod_serial, HV_CONFSTR_CPUMOD_SERIAL_NUM)
HV_CONF_ATTR(cpumod_revision, HV_CONFSTR_CPUMOD_REV)
HV_CONF_ATTR(cpumod_description,HV_CONFSTR_CPUMOD_DESC)
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL)
static struct attribute *board_attrs[] = {
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
&dev_attr_board_part.attr,
&dev_attr_board_serial.attr,
&dev_attr_board_revision.attr,
&dev_attr_board_description.attr,
&dev_attr_mezz_part.attr,
&dev_attr_mezz_serial.attr,
&dev_attr_mezz_revision.attr,
&dev_attr_mezz_description.attr,
&dev_attr_cpumod_part.attr,
&dev_attr_cpumod_serial.attr,
&dev_attr_cpumod_revision.attr,
&dev_attr_cpumod_description.attr,
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
&dev_attr_switch_control.attr,
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
NULL
};
static struct attribute_group board_attr_group = {
.name = "board",
.attrs = board_attrs,
};
static struct bin_attribute hvconfig_bin;
static ssize_t
hvconfig_bin_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
static size_t size;
/* Lazily learn the true size (minus the trailing NUL). */
if (size == 0)
size = hv_confstr(HV_CONFSTR_HV_CONFIG, 0, 0) - 1;
/* Check and adjust input parameters. */
if (off > size)
return -EINVAL;
if (count > size - off)
count = size - off;
if (count) {
/* Get a copy of the hvc and copy out the relevant portion. */
char *hvc;
size = off + count;
hvc = kmalloc(size, GFP_KERNEL);
if (hvc == NULL)
return -ENOMEM;
hv_confstr(HV_CONFSTR_HV_CONFIG, (unsigned long)hvc, size);
memcpy(buf, hvc + off, count);
kfree(hvc);
}
return count;
}
static int __init create_sysfs_entries(void)
{
int err = 0;
#define create_cpu_attr(name) \
if (!err) \
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
err = device_create_file(cpu_subsys.dev_root, &dev_attr_##name);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
create_cpu_attr(chip_width);
create_cpu_attr(chip_height);
create_cpu_attr(chip_serial);
create_cpu_attr(chip_revision);
#define create_hv_attr(name) \
if (!err) \
err = sysfs_create_file(hypervisor_kobj, &dev_attr_##name.attr);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-27 00:40:09 +08:00
create_hv_attr(type);
create_hv_attr(version);
create_hv_attr(config_version);
if (!err)
err = sysfs_create_group(hypervisor_kobj, &board_attr_group);
if (!err) {
sysfs_bin_attr_init(&hvconfig_bin);
hvconfig_bin.attr.name = "hvconfig";
hvconfig_bin.attr.mode = S_IRUGO;
hvconfig_bin.read = hvconfig_bin_read;
hvconfig_bin.size = PAGE_SIZE;
err = sysfs_create_bin_file(hypervisor_kobj, &hvconfig_bin);
}
return err;
}
subsys_initcall(create_sysfs_entries);