UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/boot/dts/sama5d3.dtsi

1047 lines
29 KiB
Plaintext
Raw Normal View History

ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
/*
* sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
* applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
model = "Atmel SAMA5D3 family SoC";
compatible = "atmel,sama5d3", "atmel,sama5";
interrupt-parent = <&aic>;
aliases {
serial0 = &dbgu;
serial1 = &usart0;
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
gpio3 = &pioD;
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
ssc0 = &ssc0;
ssc1 = &ssc1;
};
cpus {
cpu@0 {
compatible = "arm,cortex-a5";
};
};
memory {
reg = <0x20000000 0x8000000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
mmc0: mmc@f0000000 {
compatible = "atmel,hsmci";
reg = <0xf0000000 0x600>;
interrupts = <21 4 0>;
ARM: at91: dts: add MCI DMA support Add DMA resources to MCI nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9g45, 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:10 +08:00
dmas = <&dma0 2 0>;
dma-names = "rxtx";
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@f0004000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-spi";
reg = <0xf0004000 0x100>;
interrupts = <24 4 3>;
cs-gpios = <&pioD 13 0
&pioD 14 0 /* conflicts with SCK0 and CANRX0 */
&pioD 15 0 /* conflicts with CTS0 and CANTX0 */
&pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
ssc0: ssc@f0008000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0008000 0x4000>;
interrupts = <38 4 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
can0: can@f000c000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
interrupts = <40 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
status = "disabled";
};
tcb0: timer@f0010000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
interrupts = <26 4 0>;
};
i2c0: i2c@f0014000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0014000 0x4000>;
interrupts = <18 4 6>;
ARM: at91: dts: add i2c dma support Add DMA resources to i2c nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:08 +08:00
dmas = <&dma0 2 7>,
<&dma0 2 8>;
dma-names = "tx", "rx";
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@f0018000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0018000 0x4000>;
interrupts = <19 4 6>;
ARM: at91: dts: add i2c dma support Add DMA resources to i2c nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:08 +08:00
dmas = <&dma0 2 9>,
<&dma0 2 10>;
dma-names = "tx", "rx";
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usart0: serial@f001c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf001c000 0x100>;
interrupts = <12 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
usart1: serial@f0020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf0020000 0x100>;
interrupts = <13 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
macb0: ethernet@f0028000 {
compatible = "cnds,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
status = "disabled";
};
isi: isi@f0034000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xf0034000 0x4000>;
interrupts = <37 4 5>;
status = "disabled";
};
mmc1: mmc@f8000000 {
compatible = "atmel,hsmci";
reg = <0xf8000000 0x600>;
interrupts = <22 4 0>;
ARM: at91: dts: add MCI DMA support Add DMA resources to MCI nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9g45, 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:10 +08:00
dmas = <&dma1 2 0>;
dma-names = "rxtx";
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@f8004000 {
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
interrupts = <23 4 0>;
ARM: at91: dts: add MCI DMA support Add DMA resources to MCI nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9g45, 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:10 +08:00
dmas = <&dma1 2 1>;
dma-names = "rxtx";
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@f8008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-spi";
reg = <0xf8008000 0x100>;
interrupts = <25 4 3>;
cs-gpios = <&pioC 25 0
&pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
&pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
&pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
ssc1: ssc@f800c000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf800c000 0x4000>;
interrupts = <39 4 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
can1: can@f8010000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf8010000 0x300>;
interrupts = <41 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
};
tcb1: timer@f8014000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8014000 0x100>;
interrupts = <27 4 0>;
};
adc0: adc@f8018000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xf8018000 0x100>;
interrupts = <29 4 5>;
pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_adc0_adtrg
&pinctrl_adc0_ad0
&pinctrl_adc0_ad1
&pinctrl_adc0_ad2
&pinctrl_adc0_ad3
&pinctrl_adc0_ad4
&pinctrl_adc0_ad5
&pinctrl_adc0_ad6
&pinctrl_adc0_ad7
&pinctrl_adc0_ad8
&pinctrl_adc0_ad9
&pinctrl_adc0_ad10
&pinctrl_adc0_ad11
>;
atmel,adc-channel-base = <0x50>;
atmel,adc-channels-used = <0xfff>;
atmel,adc-drdy-mask = <0x1000000>;
atmel,adc-num-channels = <12>;
atmel,adc-startup-time = <40>;
atmel,adc-status-register = <0x30>;
atmel,adc-trigger-register = <0xc0>;
atmel,adc-use-external;
atmel,adc-vref = <3000>;
atmel,adc-res = <10 12>;
atmel,adc-res-names = "lowres", "highres";
status = "disabled";
trigger@0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
trigger@1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
trigger@2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
trigger@3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
};
tsadcc: tsadcc@f8018000 {
compatible = "atmel,at91sam9x5-tsadcc";
reg = <0xf8018000 0x4000>;
interrupts = <29 4 5>;
atmel,tsadcc_clock = <300000>;
atmel,filtering_average = <0x03>;
atmel,pendet_debounce = <0x08>;
atmel,pendet_sensitivity = <0x02>;
atmel,ts_sample_hold_time = <0x0a>;
status = "disabled";
};
i2c2: i2c@f801c000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf801c000 0x4000>;
interrupts = <20 4 6>;
ARM: at91: dts: add i2c dma support Add DMA resources to i2c nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:08 +08:00
dmas = <&dma1 2 11>,
<&dma1 2 12>;
dma-names = "tx", "rx";
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usart2: serial@f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x100>;
interrupts = <14 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
usart3: serial@f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x100>;
interrupts = <15 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
macb1: ethernet@f802c000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <35 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
status = "disabled";
};
sha@f8034000 {
compatible = "atmel,sam9g46-sha";
reg = <0xf8034000 0x100>;
interrupts = <42 4 0>;
};
aes@f8038000 {
compatible = "atmel,sam9g46-aes";
reg = <0xf8038000 0x100>;
interrupts = <43 4 0>;
};
tdes@f803c000 {
compatible = "atmel,sam9g46-tdes";
reg = <0xf803c000 0x100>;
interrupts = <44 4 0>;
};
dma0: dma-controller@ffffe600 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe600 0x200>;
interrupts = <30 4 0>;
ARM: at91: dts: set #dma-cells to the correct value Moving to generic DMA DT binding involves to set #dma-cells to 2. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:06 +08:00
#dma-cells = <2>;
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
};
dma1: dma-controller@ffffe800 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe800 0x200>;
interrupts = <31 4 0>;
ARM: at91: dts: set #dma-cells to the correct value Moving to generic DMA DT binding involves to set #dma-cells to 2. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-16 21:03:06 +08:00
#dma-cells = <2>;
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 21:24:13 +08:00
};
ramc0: ramc@ffffea00 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffea00 0x200>;
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <2 4 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
aic: interrupt-controller@fffff000 {
#interrupt-cells = <3>;
compatible = "atmel,sama5d3-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
atmel,external-irqs = <47>;
};
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
/* A B C */
0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */
0xffffffff 0x0ff8ffff 0x00000000 /* pioB */
0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */
0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */
0xffffffff 0xbf9f8000 0x18000000 /* pioE */
>;
/* shared pinctrl settings */
adc0 {
pinctrl_adc0_adtrg: adc0_adtrg {
atmel,pins =
<3 19 0x1 0x0>; /* PD19 periph A ADTRG */
};
pinctrl_adc0_ad0: adc0_ad0 {
atmel,pins =
<3 20 0x1 0x0>; /* PD20 periph A AD0 */
};
pinctrl_adc0_ad1: adc0_ad1 {
atmel,pins =
<3 21 0x1 0x0>; /* PD21 periph A AD1 */
};
pinctrl_adc0_ad2: adc0_ad2 {
atmel,pins =
<3 22 0x1 0x0>; /* PD22 periph A AD2 */
};
pinctrl_adc0_ad3: adc0_ad3 {
atmel,pins =
<3 23 0x1 0x0>; /* PD23 periph A AD3 */
};
pinctrl_adc0_ad4: adc0_ad4 {
atmel,pins =
<3 24 0x1 0x0>; /* PD24 periph A AD4 */
};
pinctrl_adc0_ad5: adc0_ad5 {
atmel,pins =
<3 25 0x1 0x0>; /* PD25 periph A AD5 */
};
pinctrl_adc0_ad6: adc0_ad6 {
atmel,pins =
<3 26 0x1 0x0>; /* PD26 periph A AD6 */
};
pinctrl_adc0_ad7: adc0_ad7 {
atmel,pins =
<3 27 0x1 0x0>; /* PD27 periph A AD7 */
};
pinctrl_adc0_ad8: adc0_ad8 {
atmel,pins =
<3 28 0x1 0x0>; /* PD28 periph A AD8 */
};
pinctrl_adc0_ad9: adc0_ad9 {
atmel,pins =
<3 29 0x1 0x0>; /* PD29 periph A AD9 */
};
pinctrl_adc0_ad10: adc0_ad10 {
atmel,pins =
<3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */
};
pinctrl_adc0_ad11: adc0_ad11 {
atmel,pins =
<3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */
};
};
can0 {
pinctrl_can0_rx_tx: can0_rx_tx {
atmel,pins =
<3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
};
};
can1 {
pinctrl_can1_rx_tx: can1_rx_tx {
atmel,pins =
<1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */
1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */
};
};
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<1 30 0x1 0x0 /* PB30 periph A */
1 31 0x1 0x1>; /* PB31 periph A with pullup */
};
};
i2c0 {
pinctrl_i2c0: i2c0-0 {
atmel,pins =
<0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
};
};
i2c1 {
pinctrl_i2c1: i2c1-0 {
atmel,pins =
<2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
};
};
isi {
pinctrl_isi: isi-0 {
atmel,pins =
<0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
};
pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
atmel,pins =
<3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */
};
};
lcd {
pinctrl_lcd: lcd-0 {
atmel,pins =
<0 24 0x1 0x0 /* PA24 periph A LCDPWM */
0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */
0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */
0 25 0x1 0x0 /* PA25 periph A LCDDISP */
0 29 0x1 0x0 /* PA29 periph A LCDDEN */
0 28 0x1 0x0 /* PA28 periph A LCDPCK */
0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */
0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */
0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */
0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */
0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */
0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */
0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */
0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */
0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */
0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */
0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */
0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */
0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */
0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */
0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */
0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */
2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */
2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */
2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */
2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */
2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */
2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */
4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */
4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */
};
};
macb0 {
pinctrl_macb0_data_rgmii: macb0_data_rgmii {
atmel,pins =
<1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */
1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */
1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */
1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */
1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */
1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */
1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */
1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */
};
pinctrl_macb0_data_gmii: macb0_data_gmii {
atmel,pins =
<1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */
1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */
1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */
1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */
};
pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
atmel,pins =
<1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */
1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
1 16 0x1 0x0 /* PB16 periph A GMDC */
1 17 0x1 0x0 /* PB17 periph A GMDIO */
1 18 0x1 0x0>; /* PB18 periph A G125CK */
};
pinctrl_macb0_signal_gmii: macb0_signal_gmii {
atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */
1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */
1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */
1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */
1 16 0x1 0x0 /* PB16 periph A GMDC */
1 17 0x1 0x0 /* PB17 periph A GMDIO */
1 27 0x2 0x0>; /* PB27 periph B G125CKO */
};
};
macb1 {
pinctrl_macb1_rmii: macb1_rmii-0 {
atmel,pins =
<2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */
2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */
2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */
2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */
2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */
2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */
2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */
2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */
2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */
2 9 0x1 0x0>; /* PC9 periph A EMDIO */
};
};
mmc0 {
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
atmel,pins =
<3 9 0x1 0x0 /* PD9 periph A MCI0_CK */
3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */
3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */
};
pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
atmel,pins =
<3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */
3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */
3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */
};
pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
atmel,pins =
<3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
};
};
mmc1 {
pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
atmel,pins =
<1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */
1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
};
pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
atmel,pins =
<1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
};
};
mmc2 {
pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
atmel,pins =
<2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */
2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */
2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */
};
pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
atmel,pins =
<2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
};
};
nand0 {
pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
atmel,pins =
<4 21 0x1 0x1 /* PE21 periph A with pullup */
4 22 0x1 0x1>; /* PE22 periph A with pullup */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x100>;
interrupts = <6 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioB: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
interrupts = <7 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioC: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
interrupts = <8 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioD: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
interrupts = <9 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioE: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x100>;
interrupts = <10 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
<3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */
3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */
3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */
3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */
};
};
spi1 {
pinctrl_spi1: spi1-0 {
atmel,pins =
<2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */
2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */
2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */
2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx {
atmel,pins =
<2 16 0x1 0x0 /* PC16 periph A TK0 */
2 17 0x1 0x0 /* PC17 periph A TF0 */
2 18 0x1 0x0>; /* PC18 periph A TD0 */
};
pinctrl_ssc0_rx: ssc0_rx {
atmel,pins =
<2 19 0x1 0x0 /* PC19 periph A RK0 */
2 20 0x1 0x0 /* PC20 periph A RF0 */
2 21 0x1 0x0>; /* PC21 periph A RD0 */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx {
atmel,pins =
<1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */
1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */
1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */
};
pinctrl_ssc1_rx: ssc1_rx {
atmel,pins =
<1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */
1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */
1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */
};
};
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
<2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
<0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
};
};
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
<3 17 0x1 0x0 /* PD17 periph A */
3 18 0x1 0x1>; /* PD18 periph A with pullup */
};
pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
};
};
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<1 28 0x1 0x0 /* PB28 periph A */
1 29 0x1 0x1>; /* PB29 periph A with pullup */
};
pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */
1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */
};
};
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
<4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */
4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */
};
pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
atmel,pins =
<4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */
4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */
};
};
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
<4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */
4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */
};
pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */
4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */
};
};
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x120>;
};
rstc@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
};
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <3 4 5>;
};
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
status = "disabled";
};
rtc@fffffeb0 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
interrupts = <1 4 7>;
};
};
usb0: gadget@00500000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9rl-udc";
reg = <0x00500000 0x100000
0xf8030000 0x4000>;
interrupts = <33 4 2>;
status = "disabled";
ep0 {
reg = <0>;
atmel,fifo-size = <64>;
atmel,nb-banks = <1>;
};
ep1 {
reg = <1>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
atmel,can-isoc;
};
ep2 {
reg = <2>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
atmel,can-isoc;
};
ep3 {
reg = <3>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep4 {
reg = <4>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep5 {
reg = <5>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep6 {
reg = <6>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep7 {
reg = <7>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep8 {
reg = <8>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep9 {
reg = <9>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep10 {
reg = <10>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep11 {
reg = <11>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep12 {
reg = <12>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep13 {
reg = <13>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep14 {
reg = <14>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep15 {
reg = <15>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
};
usb1: ohci@00600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 4 2>;
status = "disabled";
};
usb2: ehci@00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 4 2>;
status = "disabled";
};
nand0: nand@60000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = < 0x60000000 0x01000000 /* EBI CS3 */
0xffffc070 0x00000490 /* SMC PMECC regs */
0xffffc500 0x00000100 /* SMC PMECC Error Location regs */
0x00100000 0x00100000 /* ROM code */
0x70000000 0x10000000 /* NFC Command Registers */
0xffffc000 0x00000070 /* NFC HSMC regs */
0x00200000 0x00100000 /* NFC SRAM banks */
>;
interrupts = <5 4 6>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand0_ale_cle>;
atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
status = "disabled";
};
};
};