UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/ide/ide-cs.c

476 lines
16 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*======================================================================
A driver for PCMCIA IDE/ATA disk cards
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in
which case the provisions of the GPL are applicable instead of the
above. If you wish to allow the use of your version of this file
only under the terms of the GPL and not to allow others to use
your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the notice
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
======================================================================*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/ide.h>
#include <linux/major.h>
[PATCH] janitor: ide/ide-cs: replace schedule_timeout() with msleep() Uses msleep() in place of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 15:27:15 +08:00
#include <linux/delay.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/io.h>
#include <asm/system.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
#define DRV_NAME "ide-cs"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*====================================================================*/
/* Module parameters */
MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
MODULE_LICENSE("Dual MPL/GPL");
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
pcmcia: ide-cs debugging bugfix The code in module ide-cs does not conform to the current standard if setting CONFIG_PCMCIA_DEBUG to "y", and loading the module with the option "pc_debug=N". When that is fixed, then a warning results that version is defined but not used. This patch fixes both situations. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-12 10:48:54 +08:00
#ifdef CONFIG_PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
typedef struct ide_info_t {
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 17:45:09 +08:00
struct pcmcia_device *p_dev;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int ndev;
dev_node_t node;
} ide_info_t;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
static void ide_release(struct pcmcia_device *);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
static int ide_config(struct pcmcia_device *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:23:14 +08:00
static void ide_detach(struct pcmcia_device *p_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: remove dev_list from drivers The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:35 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*======================================================================
ide_attach() creates an "instance" of the driver, allocating
local data structures for one device. The device is registered
with Card Services.
======================================================================*/
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
static int ide_probe(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide_info_t *info;
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:51 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
DEBUG(0, "ide_attach()\n");
/* Create new ide device */
[PATCH] ide: kmalloc + memset -> kzalloc conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 17:01:25 +08:00
info = kzalloc(sizeof(*info), GFP_KERNEL);
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:51 +08:00
if (!info)
return -ENOMEM;
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 17:45:09 +08:00
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
info->p_dev = link;
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 17:45:09 +08:00
link->priv = info;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = 3;
[PATCH] ide-cs (CompactFlash) driver, rm irq warning Git rid of the runtime warning about pcmcia not supporting exclusive IRQs, so "the driver needs updating". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:14:35 +08:00
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:51 +08:00
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
return ide_config(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_attach */
/*======================================================================
This deletes a driver "instance". The device is de-registered
with Card Services. If it has been released, all local data
structures are freed. Otherwise, the structures will be freed
when the device is released.
======================================================================*/
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
static void ide_detach(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
ide_info_t *info = link->priv;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
ide_hwif_t *hwif = info->host->ports[0];
ide-cs: fix releasing I/O resources hwif content is already freed after ide_release() call so cache hwif->io_ports.{data,ctl}_addr in local variables in ide_detach(). This fixes post-2.6.25 regression. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
unsigned long data_addr, ctl_addr;
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
DEBUG(0, "ide_detach(0x%p)\n", link);
ide-cs: fix releasing I/O resources hwif content is already freed after ide_release() call so cache hwif->io_ports.{data,ctl}_addr in local variables in ide_detach(). This fixes post-2.6.25 regression. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
data_addr = hwif->io_ports.data_addr;
ctl_addr = hwif->io_ports.ctl_addr;
[PATCH] pcmcia: use bitfield instead of p_state and state Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-02 07:09:29 +08:00
ide_release(link);
[PATCH] pcmcia: remove dev_list from drivers The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:35 +08:00
ide-cs: fix releasing I/O resources hwif content is already freed after ide_release() call so cache hwif->io_ports.{data,ctl}_addr in local variables in ide_detach(). This fixes post-2.6.25 regression. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
release_region(ctl_addr, 1);
release_region(data_addr, 8);
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
kfree(info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_detach */
ide: add struct ide_port_ops (take 2) * Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:14 +08:00
static const struct ide_port_ops idecs_port_ops = {
.quirkproc = ide_undecoded_slave,
};
ide-cs: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-17 02:33:40 +08:00
static const struct ide_port_info idecs_port_info = {
.port_ops = &idecs_port_ops,
.host_flags = IDE_HFLAG_NO_DMA,
ide: allow host drivers to specify IRQ flags * Add ->irq_flags field to struct ide_port_info and struct ide_host. * Update host drivers and IDE PCI code to use ->irq_flags field. * Convert init_irq() and ide_intr() to use host->irq_flags. This fixes handling of shared IRQs for non-PCI hosts and removes ugly ifdeffery from core IDE code. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 19:46:27 +08:00
.irq_flags = IRQF_SHARED,
ide: remove chipset field from hw_regs_t * Convert host drivers that still use hw_regs_t's chipset field to use the one in struct ide_port_info instead. * Move special handling of ide_pci chipset type from ide_hw_configure() to ide_init_port(). * Remove chipset field from hw_regs_t. While at it: - remove stale comment in delkin_cb.c There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-18 01:12:22 +08:00
.chipset = ide_pci,
ide-cs: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-17 02:33:40 +08:00
};
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
unsigned long irq, struct pcmcia_device *handle)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host;
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide_hwif_t *hwif;
ide: add ide_host_add() helper Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(), then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some host drivers to use it. While at it: * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c, macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value. * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c and pmac.c * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c * -1 -> -ENOMEM in ide-pnp.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
int i, rc;
ide: remove hw_regs_t typedef Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-18 01:12:25 +08:00
struct ide_hw hw, *hws[] = { &hw };
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
if (!request_region(io, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
DRV_NAME, io, io + 7);
return NULL;
}
if (!request_region(ctl, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
DRV_NAME, ctl);
release_region(io, 8);
return NULL;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memset(&hw, 0, sizeof(hw));
ide-cs: use ide_std_init_ports() No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:47 +08:00
ide_std_init_ports(&hw, io, ctl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hw.irq = irq;
[PATCH] ide: incorrect device link for ide-cs Devices driven by ide-cs will appear under /sys/devices instead of the appropriate PCMCIA device. To fix this I had to extend the hw_regs_t structure with a 'struct device' field, which allows us to set the parent link for the appropriate hwif. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@suse.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-10 05:47:18 +08:00
hw.dev = &handle->dev;
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide: pass number of ports to ide_host_{alloc,add}() (v2) Pass number of ports to ide_host_{alloc,add}() and then update all users accordingly. v2: - drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c (noticed by Sergei) There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-18 01:12:24 +08:00
rc = ide_host_add(&idecs_port_info, hws, 1, &host);
ide: add ide_host_add() helper Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(), then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some host drivers to use it. While at it: * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c, macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value. * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c and pmac.c * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c * -1 -> -ENOMEM in ide-pnp.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
if (rc)
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
goto out_release;
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
hwif = host->ports[0];
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
if (hwif->present)
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
return host;
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
/* retry registration in case device is still spinning up */
for (i = 0; i < 10; i++) {
msleep(100);
ide_port_scan(hwif);
if (hwif->present)
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
return host;
ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
}
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
return host;
ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
out_release:
release_region(ctl, 1);
release_region(io, 8);
return NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*======================================================================
ide_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
ide device available to the system.
======================================================================*/
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
struct pcmcia_config_check {
unsigned long ctl_base;
int skip_vcc;
int is_kme;
};
static int pcmcia_check_one_config(struct pcmcia_device *pdev,
cistpl_cftable_entry_t *cfg,
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
cistpl_cftable_entry_t *dflt,
pcmcia: pcmcia_config_loop() improvement by passing vcc By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 22:12:00 +08:00
unsigned int vcc,
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
void *priv_data)
{
struct pcmcia_config_check *stk = priv_data;
/* Check for matching Vcc, unless we're desperate */
if (!stk->skip_vcc) {
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
pcmcia: pcmcia_config_loop() improvement by passing vcc By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 22:12:00 +08:00
if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
return -ENODEV;
} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
pcmcia: pcmcia_config_loop() improvement by passing vcc By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 22:12:00 +08:00
if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
return -ENODEV;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
}
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
pdev->conf.ConfigIndex = cfg->index;
pdev->io.BasePort1 = io->win[0].base;
pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
if (!(io->flags & CISTPL_IO_16BIT))
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
if (io->nwin == 2) {
pdev->io.NumPorts1 = 8;
pdev->io.BasePort2 = io->win[1].base;
pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
return -ENODEV;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
stk->ctl_base = pdev->io.BasePort2;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
pdev->io.NumPorts1 = io->win[0].len;
pdev->io.NumPorts2 = 0;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
return -ENODEV;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
stk->ctl_base = pdev->io.BasePort1 + 0x0e;
} else
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
return -ENODEV;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
/* If we've got this far, we're done */
return 0;
}
return -ENODEV;
}
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
static int ide_config(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide_info_t *info = link->priv;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
struct pcmcia_config_check *stk = NULL;
int last_ret = 0, last_fn = 0, is_kme = 0;
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
unsigned long io_base, ctl_base;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
DEBUG(0, "ide_config(0x%p)\n", link);
[PATCH] pcmcia: remove manf_id and card_id indirection As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-26 09:28:53 +08:00
is_kme = ((link->manf_id == MANFID_KME) &&
((link->card_id == PRODID_KME_KXLC005_A) ||
(link->card_id == PRODID_KME_KXLC005_B)));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
stk = kzalloc(sizeof(*stk), GFP_KERNEL);
if (!stk)
goto err_mem;
stk->is_kme = is_kme;
stk->skip_vcc = io_base = ctl_base = 0;
pcmcia: pcmcia_config_loop() improvement by passing vcc By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 22:12:00 +08:00
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
stk->skip_vcc = 1;
if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
goto failed; /* No suitable config found */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
io_base = link->io.BasePort1;
ctl_base = stk->ctl_base;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* disable drive interrupts during IDE probe */
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
outb(0x02, ctl_base);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* special setup for KXLC005 card */
if (is_kme)
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
outb(0x81, ctl_base+1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
if (host == NULL && link->io.NumPorts1 == 0x20) {
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
outb(0x02, ctl_base + 0x10);
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
host = idecs_register(io_base + 0x10, ctl_base + 0x10,
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
link->irq.AssignedIRQ, link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
if (host == NULL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto failed;
info->ndev = 1;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
info->node.major = host->ports[0]->major;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
info->node.minor = 0;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
info->host = host;
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 17:45:09 +08:00
link->dev_node = &info->node;
[PATCH] pcmcia: remove unneeded Vcc pseudo setting As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-15 19:43:16 +08:00
printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
kfree(stk);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err_mem:
printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
goto failed;
cs_failed:
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
cs_error(link, last_fn, last_ret);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
failed:
kfree(stk);
ide_release(link);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_config */
/*======================================================================
After a card is removed, ide_release() will unregister the net
device, and release the PCMCIA configuration. If the device is
still open, this will be postponed until it is closed.
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
======================================================================*/
pcmcia: Fix ide-cs sparse warning Sparse shows the following warning: CHECK drivers/ide/legacy/ide-cs.c drivers/ide/legacy/ide-cs.c:378:6: warning: symbol 'ide_release' was not declared. Should it be static? Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-14 01:46:36 +08:00
static void ide_release(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide_info_t *info = link->priv;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host = info->host;
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
DEBUG(0, "ide_release(0x%p)\n", link);
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
if (info->ndev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* FIXME: if this fails we need to queue the cleanup somehow
-- need to investigate the required PCMCIA magic */
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
ide_host_remove(host);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
info->ndev = 0;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
pcmcia_disable_device(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_release */
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:21:18 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*======================================================================
The card status event handler. Mostly, this schedules other
stuff to run after an event is received. A CARD_REMOVAL event
also sets some flags to discourage the ide drivers from
talking to the ports.
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
======================================================================*/
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_FUNC_ID(4),
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
[PATCH] pcmcia: add some IDs for ide-cs and dtl1_cs Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05 17:56:03 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
ide-cs: Update device table Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-04 00:48:54 +08:00
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
pcmcia: uniform device IDs of pata_pcmcia and ide-cs Over time, a few differences have accumulated between pata_pcmcia and ide-cs. Fix those. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-04 03:12:07 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
ide-cs: Update device table Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-04 00:48:54 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
pcmcia ide kingston compactflash's have a new manufacturer id Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes <cniclaes@develtech.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-21 02:53:34 +08:00
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
pcmcia: uniform device IDs of pata_pcmcia and ide-cs Over time, a few differences have accumulated between pata_pcmcia and ide-cs. Fix those. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-04 03:12:07 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
[PATCH] pcmcia: more IDs for ide_cs (Partly From: David Brownell <dbrownell@users.sourceforge.net> ) Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and STI. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
[PATCH] pcmcia: more IDs for ide_cs (Partly From: David Brownell <dbrownell@users.sourceforge.net> ) Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and STI. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
ide-cs: Update device table Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-04 00:48:54 +08:00
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
pcmcia: add CNF-CDROM-ID for ide Fixes this report: http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/ Reported-by: John McGrath <john@john-mcgrath.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 04:09:32 +08:00
PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
[PATCH] pcmcia: fix many device IDs If the product-id-string contains the '+' , '&' ,'_', it was not converted properly from the /etc/pcmcia/config(pcmcia-cs config file). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 16:07:24 +08:00
PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
[PATCH] pcmcia: add some IDs for ide-cs and dtl1_cs Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05 17:56:03 +08:00
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
[PATCH] ide_cs: Add IBM microdrive to known IDs Add the IBM microdrive to the known PCMCIA IDs for ide_cs. Signed-off-by: Thomas Kleffel <tk@maintech.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-16 00:44:37 +08:00
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA: Add another MemoryCard to ide-cs/pata_pcmcia One card submitted by user. Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20 07:11:53 +08:00
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
pcmcia: add an pata/ide ID Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-21 02:53:34 +08:00
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
[PATCH] PCMCIA: Add few IDs into ide-cs Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:14:29 +08:00
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
[PATCH] pcmcia: update ID for NinjaATA Christian Zoz reported there are multiple NinjaATA devices all sharing the second product ID string, but not the first one. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-17 17:17:56 +08:00
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
[PATCH] PCMCIA: Add few IDs into ide-cs Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:14:29 +08:00
PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
[PATCH] pcmcia: add another ide-cs CF card id Add another CF card ID. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-25 22:36:32 +08:00
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
pcmcia: add another pata/ide ID Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters <w1ll14@gmail.com> Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-21 02:53:34 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
[PATCH] pcmcia: Add an id to ide-cs.c Add an ID entry for: product info: "TRANSCEND", "TS1GCF80", "", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-27 06:56:00 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
ide-cs: recognize 2GB CompactFlash from Transcend Without the following patch, the kernel does not automatically detect 2GB CompactFlash cards from Transcend. Signed-off-by: Fabrice Aeschbacher <fabrice.aeschbacher@siemens.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Peter Stuge <peter@stuge.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-06 04:03:51 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
[PATCH] PCMCIA: Add few IDs into ide-cs Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:14:29 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
[PATCH] pcmcia: yet another IDE ID Microdrive reported by one of OpenEmbedded developers. product info: "WEIDA", "TWTTI", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) (equivalent update to pata_pcmcia.c by Dominik Brodowski) Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-31 05:28:09 +08:00
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
[PATCH] pcmcia: more IDs for ide_cs (Partly From: David Brownell <dbrownell@users.sourceforge.net> ) Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and STI. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:28 +08:00
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
[PATCH] pcmcia: ide-cs id_table update SanDisk ConnectPlus has two functions. Function 0 is prism2 card, currently only supported by HostAP (not in the kernel). Function 1 is 128M flash, supported by ide-cs. This patch adds an entry for function 1 to ide-cs.c. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 16:07:19 +08:00
PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
pcmcia: add another pata/ide ID Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk CC: linux-ide@vger.kernel.org
2008-11-06 18:44:34 +08:00
PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, ide_ids);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct pcmcia_driver ide_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "ide-cs",
},
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
.probe = ide_probe,
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:23:14 +08:00
.remove = ide_detach,
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
.id_table = ide_ids,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static int __init init_ide_cs(void)
{
return pcmcia_register_driver(&ide_cs_driver);
}
static void __exit exit_ide_cs(void)
{
pcmcia_unregister_driver(&ide_cs_driver);
}
[PATCH] pcmcia: defer ide-cs initialization after other IDE drivers started up Avoid registering PCMCIA CF cards before other IDE stuff. This means the risk of /dev/hd* being re-ordered is lessened. The _sane_ thing to assert any ordering is to use udev, nameif and so on, of course. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 20:16:55 +08:00
late_initcall(init_ide_cs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_exit(exit_ide_cs);