OpenCloudOS-Kernel/kernel/bpf/btf.c

4132 lines
104 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (c) 2018 Facebook */
#include <uapi/linux/btf.h>
#include <uapi/linux/bpf.h>
#include <uapi/linux/bpf_perf_event.h>
#include <uapi/linux/types.h>
#include <linux/seq_file.h>
#include <linux/compiler.h>
#include <linux/ctype.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/anon_inodes.h>
#include <linux/file.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/idr.h>
#include <linux/sort.h>
#include <linux/bpf_verifier.h>
#include <linux/btf.h>
#include <linux/skmsg.h>
#include <linux/perf_event.h>
#include <net/sock.h>
/* BTF (BPF Type Format) is the meta data format which describes
* the data types of BPF program/map. Hence, it basically focus
* on the C programming language which the modern BPF is primary
* using.
*
* ELF Section:
* ~~~~~~~~~~~
* The BTF data is stored under the ".BTF" ELF section
*
* struct btf_type:
* ~~~~~~~~~~~~~~~
* Each 'struct btf_type' object describes a C data type.
* Depending on the type it is describing, a 'struct btf_type'
* object may be followed by more data. F.e.
* To describe an array, 'struct btf_type' is followed by
* 'struct btf_array'.
*
* 'struct btf_type' and any extra data following it are
* 4 bytes aligned.
*
* Type section:
* ~~~~~~~~~~~~~
* The BTF type section contains a list of 'struct btf_type' objects.
* Each one describes a C type. Recall from the above section
* that a 'struct btf_type' object could be immediately followed by extra
* data in order to desribe some particular C types.
*
* type_id:
* ~~~~~~~
* Each btf_type object is identified by a type_id. The type_id
* is implicitly implied by the location of the btf_type object in
* the BTF type section. The first one has type_id 1. The second
* one has type_id 2...etc. Hence, an earlier btf_type has
* a smaller type_id.
*
* A btf_type object may refer to another btf_type object by using
* type_id (i.e. the "type" in the "struct btf_type").
*
* NOTE that we cannot assume any reference-order.
* A btf_type object can refer to an earlier btf_type object
* but it can also refer to a later btf_type object.
*
* For example, to describe "const void *". A btf_type
* object describing "const" may refer to another btf_type
* object describing "void *". This type-reference is done
* by specifying type_id:
*
* [1] CONST (anon) type_id=2
* [2] PTR (anon) type_id=0
*
* The above is the btf_verifier debug log:
* - Each line started with "[?]" is a btf_type object
* - [?] is the type_id of the btf_type object.
* - CONST/PTR is the BTF_KIND_XXX
* - "(anon)" is the name of the type. It just
* happens that CONST and PTR has no name.
* - type_id=XXX is the 'u32 type' in btf_type
*
* NOTE: "void" has type_id 0
*
* String section:
* ~~~~~~~~~~~~~~
* The BTF string section contains the names used by the type section.
* Each string is referred by an "offset" from the beginning of the
* string section.
*
* Each string is '\0' terminated.
*
* The first character in the string section must be '\0'
* which is used to mean 'anonymous'. Some btf_type may not
* have a name.
*/
/* BTF verification:
*
* To verify BTF data, two passes are needed.
*
* Pass #1
* ~~~~~~~
* The first pass is to collect all btf_type objects to
* an array: "btf->types".
*
* Depending on the C type that a btf_type is describing,
* a btf_type may be followed by extra data. We don't know
* how many btf_type is there, and more importantly we don't
* know where each btf_type is located in the type section.
*
* Without knowing the location of each type_id, most verifications
* cannot be done. e.g. an earlier btf_type may refer to a later
* btf_type (recall the "const void *" above), so we cannot
* check this type-reference in the first pass.
*
* In the first pass, it still does some verifications (e.g.
* checking the name is a valid offset to the string section).
*
* Pass #2
* ~~~~~~~
* The main focus is to resolve a btf_type that is referring
* to another type.
*
* We have to ensure the referring type:
* 1) does exist in the BTF (i.e. in btf->types[])
* 2) does not cause a loop:
* struct A {
* struct B b;
* };
*
* struct B {
* struct A a;
* };
*
* btf_type_needs_resolve() decides if a btf_type needs
* to be resolved.
*
* The needs_resolve type implements the "resolve()" ops which
* essentially does a DFS and detects backedge.
*
* During resolve (or DFS), different C types have different
* "RESOLVED" conditions.
*
* When resolving a BTF_KIND_STRUCT, we need to resolve all its
* members because a member is always referring to another
* type. A struct's member can be treated as "RESOLVED" if
* it is referring to a BTF_KIND_PTR. Otherwise, the
* following valid C struct would be rejected:
*
* struct A {
* int m;
* struct A *a;
* };
*
* When resolving a BTF_KIND_PTR, it needs to keep resolving if
* it is referring to another BTF_KIND_PTR. Otherwise, we cannot
* detect a pointer loop, e.g.:
* BTF_KIND_CONST -> BTF_KIND_PTR -> BTF_KIND_CONST -> BTF_KIND_PTR +
* ^ |
* +-----------------------------------------+
*
*/
#define BITS_PER_U128 (sizeof(u64) * BITS_PER_BYTE * 2)
#define BITS_PER_BYTE_MASK (BITS_PER_BYTE - 1)
#define BITS_PER_BYTE_MASKED(bits) ((bits) & BITS_PER_BYTE_MASK)
#define BITS_ROUNDDOWN_BYTES(bits) ((bits) >> 3)
#define BITS_ROUNDUP_BYTES(bits) \
(BITS_ROUNDDOWN_BYTES(bits) + !!BITS_PER_BYTE_MASKED(bits))
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
#define BTF_INFO_MASK 0x8f00ffff
#define BTF_INT_MASK 0x0fffffff
#define BTF_TYPE_ID_VALID(type_id) ((type_id) <= BTF_MAX_TYPE)
#define BTF_STR_OFFSET_VALID(name_off) ((name_off) <= BTF_MAX_NAME_OFFSET)
/* 16MB for 64k structs and each has 16 members and
* a few MB spaces for the string section.
* The hard limit is S32_MAX.
*/
#define BTF_MAX_SIZE (16 * 1024 * 1024)
#define for_each_member(i, struct_type, member) \
for (i = 0, member = btf_type_member(struct_type); \
i < btf_type_vlen(struct_type); \
i++, member++)
#define for_each_member_from(i, from, struct_type, member) \
for (i = from, member = btf_type_member(struct_type) + from; \
i < btf_type_vlen(struct_type); \
i++, member++)
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
#define for_each_vsi(i, struct_type, member) \
for (i = 0, member = btf_type_var_secinfo(struct_type); \
i < btf_type_vlen(struct_type); \
i++, member++)
#define for_each_vsi_from(i, from, struct_type, member) \
for (i = from, member = btf_type_var_secinfo(struct_type) + from; \
i < btf_type_vlen(struct_type); \
i++, member++)
DEFINE_IDR(btf_idr);
DEFINE_SPINLOCK(btf_idr_lock);
struct btf {
void *data;
struct btf_type **types;
u32 *resolved_ids;
u32 *resolved_sizes;
const char *strings;
void *nohdr_data;
struct btf_header hdr;
u32 nr_types;
u32 types_size;
u32 data_size;
refcount_t refcnt;
u32 id;
struct rcu_head rcu;
};
enum verifier_phase {
CHECK_META,
CHECK_TYPE,
};
struct resolve_vertex {
const struct btf_type *t;
u32 type_id;
u16 next_member;
};
enum visit_state {
NOT_VISITED,
VISITED,
RESOLVED,
};
enum resolve_mode {
RESOLVE_TBD, /* To Be Determined */
RESOLVE_PTR, /* Resolving for Pointer */
RESOLVE_STRUCT_OR_ARRAY, /* Resolving for struct/union
* or array
*/
};
#define MAX_RESOLVE_DEPTH 32
struct btf_sec_info {
u32 off;
u32 len;
};
struct btf_verifier_env {
struct btf *btf;
u8 *visit_states;
struct resolve_vertex stack[MAX_RESOLVE_DEPTH];
struct bpf_verifier_log log;
u32 log_type_id;
u32 top_stack;
enum verifier_phase phase;
enum resolve_mode resolve_mode;
};
static const char * const btf_kind_str[NR_BTF_KINDS] = {
[BTF_KIND_UNKN] = "UNKNOWN",
[BTF_KIND_INT] = "INT",
[BTF_KIND_PTR] = "PTR",
[BTF_KIND_ARRAY] = "ARRAY",
[BTF_KIND_STRUCT] = "STRUCT",
[BTF_KIND_UNION] = "UNION",
[BTF_KIND_ENUM] = "ENUM",
[BTF_KIND_FWD] = "FWD",
[BTF_KIND_TYPEDEF] = "TYPEDEF",
[BTF_KIND_VOLATILE] = "VOLATILE",
[BTF_KIND_CONST] = "CONST",
[BTF_KIND_RESTRICT] = "RESTRICT",
[BTF_KIND_FUNC] = "FUNC",
[BTF_KIND_FUNC_PROTO] = "FUNC_PROTO",
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
[BTF_KIND_VAR] = "VAR",
[BTF_KIND_DATASEC] = "DATASEC",
};
struct btf_kind_operations {
s32 (*check_meta)(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left);
int (*resolve)(struct btf_verifier_env *env,
const struct resolve_vertex *v);
int (*check_member)(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type);
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
int (*check_kflag_member)(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type);
void (*log_details)(struct btf_verifier_env *env,
const struct btf_type *t);
void (*seq_show)(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offsets,
struct seq_file *m);
};
static const struct btf_kind_operations * const kind_ops[NR_BTF_KINDS];
static struct btf_type btf_void;
static int btf_resolve(struct btf_verifier_env *env,
const struct btf_type *t, u32 type_id);
static bool btf_type_is_modifier(const struct btf_type *t)
{
/* Some of them is not strictly a C modifier
* but they are grouped into the same bucket
* for BTF concern:
* A type (t) that refers to another
* type through t->type AND its size cannot
* be determined without following the t->type.
*
* ptr does not fall into this bucket
* because its size is always sizeof(void *).
*/
switch (BTF_INFO_KIND(t->info)) {
case BTF_KIND_TYPEDEF:
case BTF_KIND_VOLATILE:
case BTF_KIND_CONST:
case BTF_KIND_RESTRICT:
return true;
}
return false;
}
bool btf_type_is_void(const struct btf_type *t)
{
return t == &btf_void;
}
static bool btf_type_is_fwd(const struct btf_type *t)
{
return BTF_INFO_KIND(t->info) == BTF_KIND_FWD;
}
static bool btf_type_nosize(const struct btf_type *t)
{
return btf_type_is_void(t) || btf_type_is_fwd(t) ||
btf_type_is_func(t) || btf_type_is_func_proto(t);
}
static bool btf_type_nosize_or_null(const struct btf_type *t)
{
return !t || btf_type_nosize(t);
}
/* union is only a special case of struct:
* all its offsetof(member) == 0
*/
static bool btf_type_is_struct(const struct btf_type *t)
{
u8 kind = BTF_INFO_KIND(t->info);
return kind == BTF_KIND_STRUCT || kind == BTF_KIND_UNION;
}
bpf: introduce bpf_spin_lock Introduce 'struct bpf_spin_lock' and bpf_spin_lock/unlock() helpers to let bpf program serialize access to other variables. Example: struct hash_elem { int cnt; struct bpf_spin_lock lock; }; struct hash_elem * val = bpf_map_lookup_elem(&hash_map, &key); if (val) { bpf_spin_lock(&val->lock); val->cnt++; bpf_spin_unlock(&val->lock); } Restrictions and safety checks: - bpf_spin_lock is only allowed inside HASH and ARRAY maps. - BTF description of the map is mandatory for safety analysis. - bpf program can take one bpf_spin_lock at a time, since two or more can cause dead locks. - only one 'struct bpf_spin_lock' is allowed per map element. It drastically simplifies implementation yet allows bpf program to use any number of bpf_spin_locks. - when bpf_spin_lock is taken the calls (either bpf2bpf or helpers) are not allowed. - bpf program must bpf_spin_unlock() before return. - bpf program can access 'struct bpf_spin_lock' only via bpf_spin_lock()/bpf_spin_unlock() helpers. - load/store into 'struct bpf_spin_lock lock;' field is not allowed. - to use bpf_spin_lock() helper the BTF description of map value must be a struct and have 'struct bpf_spin_lock anyname;' field at the top level. Nested lock inside another struct is not allowed. - syscall map_lookup doesn't copy bpf_spin_lock field to user space. - syscall map_update and program map_update do not update bpf_spin_lock field. - bpf_spin_lock cannot be on the stack or inside networking packet. bpf_spin_lock can only be inside HASH or ARRAY map value. - bpf_spin_lock is available to root only and to all program types. - bpf_spin_lock is not allowed in inner maps of map-in-map. - ld_abs is not allowed inside spin_lock-ed region. - tracing progs and socket filter progs cannot use bpf_spin_lock due to insufficient preemption checks Implementation details: - cgroup-bpf class of programs can nest with xdp/tc programs. Hence bpf_spin_lock is equivalent to spin_lock_irqsave. Other solutions to avoid nested bpf_spin_lock are possible. Like making sure that all networking progs run with softirq disabled. spin_lock_irqsave is the simplest and doesn't add overhead to the programs that don't use it. - arch_spinlock_t is used when its implemented as queued_spin_lock - archs can force their own arch_spinlock_t - on architectures where queued_spin_lock is not available and sizeof(arch_spinlock_t) != sizeof(__u32) trivial lock is used. - presence of bpf_spin_lock inside map value could have been indicated via extra flag during map_create, but specifying it via BTF is cleaner. It provides introspection for map key/value and reduces user mistakes. Next steps: - allow bpf_spin_lock in other map types (like cgroup local storage) - introduce BPF_F_LOCK flag for bpf_map_update() syscall and helper to request kernel to grab bpf_spin_lock before rewriting the value. That will serialize access to map elements. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 07:40:04 +08:00
static bool __btf_type_is_struct(const struct btf_type *t)
{
return BTF_INFO_KIND(t->info) == BTF_KIND_STRUCT;
}
static bool btf_type_is_array(const struct btf_type *t)
{
return BTF_INFO_KIND(t->info) == BTF_KIND_ARRAY;
}
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
static bool btf_type_is_var(const struct btf_type *t)
{
return BTF_INFO_KIND(t->info) == BTF_KIND_VAR;
}
static bool btf_type_is_datasec(const struct btf_type *t)
{
return BTF_INFO_KIND(t->info) == BTF_KIND_DATASEC;
}
/* Types that act only as a source, not sink or intermediate
* type when resolving.
*/
static bool btf_type_is_resolve_source_only(const struct btf_type *t)
{
return btf_type_is_var(t) ||
btf_type_is_datasec(t);
}
/* What types need to be resolved?
*
* btf_type_is_modifier() is an obvious one.
*
* btf_type_is_struct() because its member refers to
* another type (through member->type).
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
*
* btf_type_is_var() because the variable refers to
* another type. btf_type_is_datasec() holds multiple
* btf_type_is_var() types that need resolving.
*
* btf_type_is_array() because its element (array->type)
* refers to another type. Array can be thought of a
* special case of struct while array just has the same
* member-type repeated by array->nelems of times.
*/
static bool btf_type_needs_resolve(const struct btf_type *t)
{
return btf_type_is_modifier(t) ||
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
btf_type_is_ptr(t) ||
btf_type_is_struct(t) ||
btf_type_is_array(t) ||
btf_type_is_var(t) ||
btf_type_is_datasec(t);
}
/* t->size can be used */
static bool btf_type_has_size(const struct btf_type *t)
{
switch (BTF_INFO_KIND(t->info)) {
case BTF_KIND_INT:
case BTF_KIND_STRUCT:
case BTF_KIND_UNION:
case BTF_KIND_ENUM:
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
case BTF_KIND_DATASEC:
return true;
}
return false;
}
static const char *btf_int_encoding_str(u8 encoding)
{
if (encoding == 0)
return "(none)";
else if (encoding == BTF_INT_SIGNED)
return "SIGNED";
else if (encoding == BTF_INT_CHAR)
return "CHAR";
else if (encoding == BTF_INT_BOOL)
return "BOOL";
else
return "UNKN";
}
static u16 btf_type_vlen(const struct btf_type *t)
{
return BTF_INFO_VLEN(t->info);
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
static bool btf_type_kflag(const struct btf_type *t)
{
return BTF_INFO_KFLAG(t->info);
}
static u32 btf_member_bit_offset(const struct btf_type *struct_type,
const struct btf_member *member)
{
return btf_type_kflag(struct_type) ? BTF_MEMBER_BIT_OFFSET(member->offset)
: member->offset;
}
static u32 btf_member_bitfield_size(const struct btf_type *struct_type,
const struct btf_member *member)
{
return btf_type_kflag(struct_type) ? BTF_MEMBER_BITFIELD_SIZE(member->offset)
: 0;
}
static u32 btf_type_int(const struct btf_type *t)
{
return *(u32 *)(t + 1);
}
static const struct btf_array *btf_type_array(const struct btf_type *t)
{
return (const struct btf_array *)(t + 1);
}
static const struct btf_member *btf_type_member(const struct btf_type *t)
{
return (const struct btf_member *)(t + 1);
}
static const struct btf_enum *btf_type_enum(const struct btf_type *t)
{
return (const struct btf_enum *)(t + 1);
}
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
static const struct btf_var *btf_type_var(const struct btf_type *t)
{
return (const struct btf_var *)(t + 1);
}
static const struct btf_var_secinfo *btf_type_var_secinfo(const struct btf_type *t)
{
return (const struct btf_var_secinfo *)(t + 1);
}
static const struct btf_kind_operations *btf_type_ops(const struct btf_type *t)
{
return kind_ops[BTF_INFO_KIND(t->info)];
}
static bool btf_name_offset_valid(const struct btf *btf, u32 offset)
{
return BTF_STR_OFFSET_VALID(offset) &&
offset < btf->hdr.str_len;
}
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
static bool __btf_name_char_ok(char c, bool first, bool dot_ok)
{
if ((first ? !isalpha(c) :
!isalnum(c)) &&
c != '_' &&
((c == '.' && !dot_ok) ||
c != '.'))
return false;
return true;
}
static bool __btf_name_valid(const struct btf *btf, u32 offset, bool dot_ok)
{
/* offset must be valid */
const char *src = &btf->strings[offset];
const char *src_limit;
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (!__btf_name_char_ok(*src, true, dot_ok))
return false;
/* set a limit on identifier length */
src_limit = src + KSYM_NAME_LEN;
src++;
while (*src && src < src_limit) {
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (!__btf_name_char_ok(*src, false, dot_ok))
return false;
src++;
}
return !*src;
}
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
/* Only C-style identifier is permitted. This can be relaxed if
* necessary.
*/
static bool btf_name_valid_identifier(const struct btf *btf, u32 offset)
{
return __btf_name_valid(btf, offset, false);
}
static bool btf_name_valid_section(const struct btf *btf, u32 offset)
{
return __btf_name_valid(btf, offset, true);
}
2018-12-14 02:41:46 +08:00
static const char *__btf_name_by_offset(const struct btf *btf, u32 offset)
{
if (!offset)
return "(anon)";
else if (offset < btf->hdr.str_len)
return &btf->strings[offset];
else
return "(invalid-name-offset)";
}
2018-12-14 02:41:46 +08:00
const char *btf_name_by_offset(const struct btf *btf, u32 offset)
{
if (offset < btf->hdr.str_len)
return &btf->strings[offset];
return NULL;
}
bpf: Introduce bpf_func_info This patch added interface to load a program with the following additional information: . prog_btf_fd . func_info, func_info_rec_size and func_info_cnt where func_info will provide function range and type_id corresponding to each function. The func_info_rec_size is introduced in the UAPI to specify struct bpf_func_info size passed from user space. This intends to make bpf_func_info structure growable in the future. If the kernel gets a different bpf_func_info size from userspace, it will try to handle user request with part of bpf_func_info it can understand. In this patch, kernel can understand struct bpf_func_info { __u32 insn_offset; __u32 type_id; }; If user passed a bpf func_info record size of 16 bytes, the kernel can still handle part of records with the above definition. If verifier agrees with function range provided by the user, the bpf_prog ksym for each function will use the func name provided in the type_id, which is supposed to provide better encoding as it is not limited by 16 bytes program name limitation and this is better for bpf program which contains multiple subprograms. The bpf_prog_info interface is also extended to return btf_id, func_info, func_info_rec_size and func_info_cnt to userspace, so userspace can print out the function prototype for each xlated function. The insn_offset in the returned func_info corresponds to the insn offset for xlated functions. With other jit related fields in bpf_prog_info, userspace can also print out function prototypes for each jited function. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-20 07:29:11 +08:00
const struct btf_type *btf_type_by_id(const struct btf *btf, u32 type_id)
{
if (type_id > btf->nr_types)
return NULL;
return btf->types[type_id];
}
/*
* Regular int is not a bit field and it must be either
* u8/u16/u32/u64 or __int128.
*/
static bool btf_type_int_is_regular(const struct btf_type *t)
{
u8 nr_bits, nr_bytes;
u32 int_data;
int_data = btf_type_int(t);
nr_bits = BTF_INT_BITS(int_data);
nr_bytes = BITS_ROUNDUP_BYTES(nr_bits);
if (BITS_PER_BYTE_MASKED(nr_bits) ||
BTF_INT_OFFSET(int_data) ||
(nr_bytes != sizeof(u8) && nr_bytes != sizeof(u16) &&
nr_bytes != sizeof(u32) && nr_bytes != sizeof(u64) &&
nr_bytes != (2 * sizeof(u64)))) {
return false;
}
return true;
}
/*
* Check that given struct member is a regular int with expected
* offset and size.
*/
bool btf_member_is_reg_int(const struct btf *btf, const struct btf_type *s,
const struct btf_member *m,
u32 expected_offset, u32 expected_size)
{
const struct btf_type *t;
u32 id, int_data;
u8 nr_bits;
id = m->type;
t = btf_type_id_size(btf, &id, NULL);
if (!t || !btf_type_is_int(t))
return false;
int_data = btf_type_int(t);
nr_bits = BTF_INT_BITS(int_data);
if (btf_type_kflag(s)) {
u32 bitfield_size = BTF_MEMBER_BITFIELD_SIZE(m->offset);
u32 bit_offset = BTF_MEMBER_BIT_OFFSET(m->offset);
/* if kflag set, int should be a regular int and
* bit offset should be at byte boundary.
*/
return !bitfield_size &&
BITS_ROUNDUP_BYTES(bit_offset) == expected_offset &&
BITS_ROUNDUP_BYTES(nr_bits) == expected_size;
}
if (BTF_INT_OFFSET(int_data) ||
BITS_PER_BYTE_MASKED(m->offset) ||
BITS_ROUNDUP_BYTES(m->offset) != expected_offset ||
BITS_PER_BYTE_MASKED(nr_bits) ||
BITS_ROUNDUP_BYTES(nr_bits) != expected_size)
return false;
return true;
}
__printf(2, 3) static void __btf_verifier_log(struct bpf_verifier_log *log,
const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
bpf_verifier_vlog(log, fmt, args);
va_end(args);
}
__printf(2, 3) static void btf_verifier_log(struct btf_verifier_env *env,
const char *fmt, ...)
{
struct bpf_verifier_log *log = &env->log;
va_list args;
if (!bpf_verifier_log_needed(log))
return;
va_start(args, fmt);
bpf_verifier_vlog(log, fmt, args);
va_end(args);
}
__printf(4, 5) static void __btf_verifier_log_type(struct btf_verifier_env *env,
const struct btf_type *t,
bool log_details,
const char *fmt, ...)
{
struct bpf_verifier_log *log = &env->log;
u8 kind = BTF_INFO_KIND(t->info);
struct btf *btf = env->btf;
va_list args;
if (!bpf_verifier_log_needed(log))
return;
/* btf verifier prints all types it is processing via
* btf_verifier_log_type(..., fmt = NULL).
* Skip those prints for in-kernel BTF verification.
*/
if (log->level == BPF_LOG_KERNEL && !fmt)
return;
__btf_verifier_log(log, "[%u] %s %s%s",
env->log_type_id,
btf_kind_str[kind],
2018-12-14 02:41:46 +08:00
__btf_name_by_offset(btf, t->name_off),
log_details ? " " : "");
if (log_details)
btf_type_ops(t)->log_details(env, t);
if (fmt && *fmt) {
__btf_verifier_log(log, " ");
va_start(args, fmt);
bpf_verifier_vlog(log, fmt, args);
va_end(args);
}
__btf_verifier_log(log, "\n");
}
#define btf_verifier_log_type(env, t, ...) \
__btf_verifier_log_type((env), (t), true, __VA_ARGS__)
#define btf_verifier_log_basic(env, t, ...) \
__btf_verifier_log_type((env), (t), false, __VA_ARGS__)
__printf(4, 5)
static void btf_verifier_log_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const char *fmt, ...)
{
struct bpf_verifier_log *log = &env->log;
struct btf *btf = env->btf;
va_list args;
if (!bpf_verifier_log_needed(log))
return;
if (log->level == BPF_LOG_KERNEL && !fmt)
return;
/* The CHECK_META phase already did a btf dump.
*
* If member is logged again, it must hit an error in
* parsing this member. It is useful to print out which
* struct this member belongs to.
*/
if (env->phase != CHECK_META)
btf_verifier_log_type(env, struct_type, NULL);
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(struct_type))
__btf_verifier_log(log,
"\t%s type_id=%u bitfield_size=%u bits_offset=%u",
__btf_name_by_offset(btf, member->name_off),
member->type,
BTF_MEMBER_BITFIELD_SIZE(member->offset),
BTF_MEMBER_BIT_OFFSET(member->offset));
else
__btf_verifier_log(log, "\t%s type_id=%u bits_offset=%u",
__btf_name_by_offset(btf, member->name_off),
member->type, member->offset);
if (fmt && *fmt) {
__btf_verifier_log(log, " ");
va_start(args, fmt);
bpf_verifier_vlog(log, fmt, args);
va_end(args);
}
__btf_verifier_log(log, "\n");
}
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
__printf(4, 5)
static void btf_verifier_log_vsi(struct btf_verifier_env *env,
const struct btf_type *datasec_type,
const struct btf_var_secinfo *vsi,
const char *fmt, ...)
{
struct bpf_verifier_log *log = &env->log;
va_list args;
if (!bpf_verifier_log_needed(log))
return;
if (log->level == BPF_LOG_KERNEL && !fmt)
return;
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (env->phase != CHECK_META)
btf_verifier_log_type(env, datasec_type, NULL);
__btf_verifier_log(log, "\t type_id=%u offset=%u size=%u",
vsi->type, vsi->offset, vsi->size);
if (fmt && *fmt) {
__btf_verifier_log(log, " ");
va_start(args, fmt);
bpf_verifier_vlog(log, fmt, args);
va_end(args);
}
__btf_verifier_log(log, "\n");
}
static void btf_verifier_log_hdr(struct btf_verifier_env *env,
u32 btf_data_size)
{
struct bpf_verifier_log *log = &env->log;
const struct btf *btf = env->btf;
const struct btf_header *hdr;
if (!bpf_verifier_log_needed(log))
return;
if (log->level == BPF_LOG_KERNEL)
return;
hdr = &btf->hdr;
__btf_verifier_log(log, "magic: 0x%x\n", hdr->magic);
__btf_verifier_log(log, "version: %u\n", hdr->version);
__btf_verifier_log(log, "flags: 0x%x\n", hdr->flags);
__btf_verifier_log(log, "hdr_len: %u\n", hdr->hdr_len);
__btf_verifier_log(log, "type_off: %u\n", hdr->type_off);
__btf_verifier_log(log, "type_len: %u\n", hdr->type_len);
__btf_verifier_log(log, "str_off: %u\n", hdr->str_off);
__btf_verifier_log(log, "str_len: %u\n", hdr->str_len);
__btf_verifier_log(log, "btf_total_size: %u\n", btf_data_size);
}
static int btf_add_type(struct btf_verifier_env *env, struct btf_type *t)
{
struct btf *btf = env->btf;
/* < 2 because +1 for btf_void which is always in btf->types[0].
* btf_void is not accounted in btf->nr_types because btf_void
* does not come from the BTF file.
*/
if (btf->types_size - btf->nr_types < 2) {
/* Expand 'types' array */
struct btf_type **new_types;
u32 expand_by, new_size;
if (btf->types_size == BTF_MAX_TYPE) {
btf_verifier_log(env, "Exceeded max num of types");
return -E2BIG;
}
expand_by = max_t(u32, btf->types_size >> 2, 16);
new_size = min_t(u32, BTF_MAX_TYPE,
btf->types_size + expand_by);
treewide: kvzalloc() -> kvcalloc() The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:04:48 +08:00
new_types = kvcalloc(new_size, sizeof(*new_types),
GFP_KERNEL | __GFP_NOWARN);
if (!new_types)
return -ENOMEM;
if (btf->nr_types == 0)
new_types[0] = &btf_void;
else
memcpy(new_types, btf->types,
sizeof(*btf->types) * (btf->nr_types + 1));
kvfree(btf->types);
btf->types = new_types;
btf->types_size = new_size;
}
btf->types[++(btf->nr_types)] = t;
return 0;
}
static int btf_alloc_id(struct btf *btf)
{
int id;
idr_preload(GFP_KERNEL);
spin_lock_bh(&btf_idr_lock);
id = idr_alloc_cyclic(&btf_idr, btf, 1, INT_MAX, GFP_ATOMIC);
if (id > 0)
btf->id = id;
spin_unlock_bh(&btf_idr_lock);
idr_preload_end();
if (WARN_ON_ONCE(!id))
return -ENOSPC;
return id > 0 ? 0 : id;
}
static void btf_free_id(struct btf *btf)
{
unsigned long flags;
/*
* In map-in-map, calling map_delete_elem() on outer
* map will call bpf_map_put on the inner map.
* It will then eventually call btf_free_id()
* on the inner map. Some of the map_delete_elem()
* implementation may have irq disabled, so
* we need to use the _irqsave() version instead
* of the _bh() version.
*/
spin_lock_irqsave(&btf_idr_lock, flags);
idr_remove(&btf_idr, btf->id);
spin_unlock_irqrestore(&btf_idr_lock, flags);
}
static void btf_free(struct btf *btf)
{
kvfree(btf->types);
kvfree(btf->resolved_sizes);
kvfree(btf->resolved_ids);
kvfree(btf->data);
kfree(btf);
}
static void btf_free_rcu(struct rcu_head *rcu)
{
struct btf *btf = container_of(rcu, struct btf, rcu);
btf_free(btf);
}
void btf_put(struct btf *btf)
{
if (btf && refcount_dec_and_test(&btf->refcnt)) {
btf_free_id(btf);
call_rcu(&btf->rcu, btf_free_rcu);
}
}
static int env_resolve_init(struct btf_verifier_env *env)
{
struct btf *btf = env->btf;
u32 nr_types = btf->nr_types;
u32 *resolved_sizes = NULL;
u32 *resolved_ids = NULL;
u8 *visit_states = NULL;
/* +1 for btf_void */
treewide: kvzalloc() -> kvcalloc() The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:04:48 +08:00
resolved_sizes = kvcalloc(nr_types + 1, sizeof(*resolved_sizes),
GFP_KERNEL | __GFP_NOWARN);
if (!resolved_sizes)
goto nomem;
treewide: kvzalloc() -> kvcalloc() The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:04:48 +08:00
resolved_ids = kvcalloc(nr_types + 1, sizeof(*resolved_ids),
GFP_KERNEL | __GFP_NOWARN);
if (!resolved_ids)
goto nomem;
treewide: kvzalloc() -> kvcalloc() The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:04:48 +08:00
visit_states = kvcalloc(nr_types + 1, sizeof(*visit_states),
GFP_KERNEL | __GFP_NOWARN);
if (!visit_states)
goto nomem;
btf->resolved_sizes = resolved_sizes;
btf->resolved_ids = resolved_ids;
env->visit_states = visit_states;
return 0;
nomem:
kvfree(resolved_sizes);
kvfree(resolved_ids);
kvfree(visit_states);
return -ENOMEM;
}
static void btf_verifier_env_free(struct btf_verifier_env *env)
{
kvfree(env->visit_states);
kfree(env);
}
static bool env_type_is_resolve_sink(const struct btf_verifier_env *env,
const struct btf_type *next_type)
{
switch (env->resolve_mode) {
case RESOLVE_TBD:
/* int, enum or void is a sink */
return !btf_type_needs_resolve(next_type);
case RESOLVE_PTR:
/* int, enum, void, struct, array, func or func_proto is a sink
* for ptr
*/
return !btf_type_is_modifier(next_type) &&
!btf_type_is_ptr(next_type);
case RESOLVE_STRUCT_OR_ARRAY:
/* int, enum, void, ptr, func or func_proto is a sink
* for struct and array
*/
return !btf_type_is_modifier(next_type) &&
!btf_type_is_array(next_type) &&
!btf_type_is_struct(next_type);
default:
BUG();
}
}
static bool env_type_is_resolved(const struct btf_verifier_env *env,
u32 type_id)
{
return env->visit_states[type_id] == RESOLVED;
}
static int env_stack_push(struct btf_verifier_env *env,
const struct btf_type *t, u32 type_id)
{
struct resolve_vertex *v;
if (env->top_stack == MAX_RESOLVE_DEPTH)
return -E2BIG;
if (env->visit_states[type_id] != NOT_VISITED)
return -EEXIST;
env->visit_states[type_id] = VISITED;
v = &env->stack[env->top_stack++];
v->t = t;
v->type_id = type_id;
v->next_member = 0;
if (env->resolve_mode == RESOLVE_TBD) {
if (btf_type_is_ptr(t))
env->resolve_mode = RESOLVE_PTR;
else if (btf_type_is_struct(t) || btf_type_is_array(t))
env->resolve_mode = RESOLVE_STRUCT_OR_ARRAY;
}
return 0;
}
static void env_stack_set_next_member(struct btf_verifier_env *env,
u16 next_member)
{
env->stack[env->top_stack - 1].next_member = next_member;
}
static void env_stack_pop_resolved(struct btf_verifier_env *env,
u32 resolved_type_id,
u32 resolved_size)
{
u32 type_id = env->stack[--(env->top_stack)].type_id;
struct btf *btf = env->btf;
btf->resolved_sizes[type_id] = resolved_size;
btf->resolved_ids[type_id] = resolved_type_id;
env->visit_states[type_id] = RESOLVED;
}
static const struct resolve_vertex *env_stack_peak(struct btf_verifier_env *env)
{
return env->top_stack ? &env->stack[env->top_stack - 1] : NULL;
}
/* Resolve the size of a passed-in "type"
*
* type: is an array (e.g. u32 array[x][y])
* return type: type "u32[x][y]", i.e. BTF_KIND_ARRAY,
* *type_size: (x * y * sizeof(u32)). Hence, *type_size always
* corresponds to the return type.
* *elem_type: u32
* *total_nelems: (x * y). Hence, individual elem size is
* (*type_size / *total_nelems)
*
* type: is not an array (e.g. const struct X)
* return type: type "struct X"
* *type_size: sizeof(struct X)
* *elem_type: same as return type ("struct X")
* *total_nelems: 1
*/
static const struct btf_type *
btf_resolve_size(const struct btf *btf, const struct btf_type *type,
u32 *type_size, const struct btf_type **elem_type,
u32 *total_nelems)
{
const struct btf_type *array_type = NULL;
const struct btf_array *array;
u32 i, size, nelems = 1;
for (i = 0; i < MAX_RESOLVE_DEPTH; i++) {
switch (BTF_INFO_KIND(type->info)) {
/* type->size can be used */
case BTF_KIND_INT:
case BTF_KIND_STRUCT:
case BTF_KIND_UNION:
case BTF_KIND_ENUM:
size = type->size;
goto resolved;
case BTF_KIND_PTR:
size = sizeof(void *);
goto resolved;
/* Modifiers */
case BTF_KIND_TYPEDEF:
case BTF_KIND_VOLATILE:
case BTF_KIND_CONST:
case BTF_KIND_RESTRICT:
type = btf_type_by_id(btf, type->type);
break;
case BTF_KIND_ARRAY:
if (!array_type)
array_type = type;
array = btf_type_array(type);
if (nelems && array->nelems > U32_MAX / nelems)
return ERR_PTR(-EINVAL);
nelems *= array->nelems;
type = btf_type_by_id(btf, array->type);
break;
/* type without size */
default:
return ERR_PTR(-EINVAL);
}
}
return ERR_PTR(-EINVAL);
resolved:
if (nelems && size > U32_MAX / nelems)
return ERR_PTR(-EINVAL);
*type_size = nelems * size;
*total_nelems = nelems;
*elem_type = type;
return array_type ? : type;
}
/* The input param "type_id" must point to a needs_resolve type */
static const struct btf_type *btf_type_id_resolve(const struct btf *btf,
u32 *type_id)
{
*type_id = btf->resolved_ids[*type_id];
return btf_type_by_id(btf, *type_id);
}
const struct btf_type *btf_type_id_size(const struct btf *btf,
u32 *type_id, u32 *ret_size)
{
const struct btf_type *size_type;
u32 size_type_id = *type_id;
u32 size = 0;
size_type = btf_type_by_id(btf, size_type_id);
if (btf_type_nosize_or_null(size_type))
return NULL;
if (btf_type_has_size(size_type)) {
size = size_type->size;
} else if (btf_type_is_array(size_type)) {
size = btf->resolved_sizes[size_type_id];
} else if (btf_type_is_ptr(size_type)) {
size = sizeof(void *);
} else {
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
size_type_id = btf->resolved_ids[size_type_id];
size_type = btf_type_by_id(btf, size_type_id);
if (btf_type_nosize_or_null(size_type))
return NULL;
bpf: fix BTF verifier size resolution logic BTF verifier has a size resolution bug which in some circumstances leads to invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have [1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer context ARRAY size won't be resolved (because for pointer it doesn't matter, so it's a sink in pointer context), but it will be permanently remembered as zero for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will be resolved correctly, but TYPEDEF resolved_size won't be updated anymore. This, subsequently, will lead to erroneous map creation failure, if that TYPEDEF is specified as either key or value, as key_size/value_size won't correspond to resolved size of TYPEDEF (kernel will believe it's zero). Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already calculated and stored. This bug manifests itself in rejecting BTF-defined maps that use array typedef as a value type: typedef int array_t[16]; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(value, array_t); /* i.e., array_t *value; */ } test_map SEC(".maps"); The fix consists on not relying on modifier's resolved_size and instead using modifier's resolved_id (type ID for "concrete" type to which modifier eventually resolves) and doing size determination for that resolved type. This allow to preserve existing "early DFS termination" logic for PTR or STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier types. Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-13 01:25:55 +08:00
else if (btf_type_has_size(size_type))
size = size_type->size;
else if (btf_type_is_array(size_type))
size = btf->resolved_sizes[size_type_id];
else if (btf_type_is_ptr(size_type))
size = sizeof(void *);
else
return NULL;
}
*type_id = size_type_id;
if (ret_size)
*ret_size = size;
return size_type;
}
static int btf_df_check_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
btf_verifier_log_basic(env, struct_type,
"Unsupported check_member");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
static int btf_df_check_kflag_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
btf_verifier_log_basic(env, struct_type,
"Unsupported check_kflag_member");
return -EINVAL;
}
/* Used for ptr, array and struct/union type members.
* int, enum and modifier types have their specific callback functions.
*/
static int btf_generic_check_kflag_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
if (BTF_MEMBER_BITFIELD_SIZE(member->offset)) {
btf_verifier_log_member(env, struct_type, member,
"Invalid member bitfield_size");
return -EINVAL;
}
/* bitfield size is 0, so member->offset represents bit offset only.
* It is safe to call non kflag check_member variants.
*/
return btf_type_ops(member_type)->check_member(env, struct_type,
member,
member_type);
}
static int btf_df_resolve(struct btf_verifier_env *env,
const struct resolve_vertex *v)
{
btf_verifier_log_basic(env, v->t, "Unsupported resolve");
return -EINVAL;
}
static void btf_df_seq_show(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offsets,
struct seq_file *m)
{
seq_printf(m, "<unsupported kind:%u>", BTF_INFO_KIND(t->info));
}
static int btf_int_check_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
u32 int_data = btf_type_int(member_type);
u32 struct_bits_off = member->offset;
u32 struct_size = struct_type->size;
u32 nr_copy_bits;
u32 bytes_offset;
if (U32_MAX - struct_bits_off < BTF_INT_OFFSET(int_data)) {
btf_verifier_log_member(env, struct_type, member,
"bits_offset exceeds U32_MAX");
return -EINVAL;
}
struct_bits_off += BTF_INT_OFFSET(int_data);
bytes_offset = BITS_ROUNDDOWN_BYTES(struct_bits_off);
nr_copy_bits = BTF_INT_BITS(int_data) +
BITS_PER_BYTE_MASKED(struct_bits_off);
if (nr_copy_bits > BITS_PER_U128) {
btf_verifier_log_member(env, struct_type, member,
"nr_copy_bits exceeds 128");
return -EINVAL;
}
if (struct_size < bytes_offset ||
struct_size - bytes_offset < BITS_ROUNDUP_BYTES(nr_copy_bits)) {
btf_verifier_log_member(env, struct_type, member,
"Member exceeds struct_size");
return -EINVAL;
}
return 0;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
static int btf_int_check_kflag_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
u32 struct_bits_off, nr_bits, nr_int_data_bits, bytes_offset;
u32 int_data = btf_type_int(member_type);
u32 struct_size = struct_type->size;
u32 nr_copy_bits;
/* a regular int type is required for the kflag int member */
if (!btf_type_int_is_regular(member_type)) {
btf_verifier_log_member(env, struct_type, member,
"Invalid member base type");
return -EINVAL;
}
/* check sanity of bitfield size */
nr_bits = BTF_MEMBER_BITFIELD_SIZE(member->offset);
struct_bits_off = BTF_MEMBER_BIT_OFFSET(member->offset);
nr_int_data_bits = BTF_INT_BITS(int_data);
if (!nr_bits) {
/* Not a bitfield member, member offset must be at byte
* boundary.
*/
if (BITS_PER_BYTE_MASKED(struct_bits_off)) {
btf_verifier_log_member(env, struct_type, member,
"Invalid member offset");
return -EINVAL;
}
nr_bits = nr_int_data_bits;
} else if (nr_bits > nr_int_data_bits) {
btf_verifier_log_member(env, struct_type, member,
"Invalid member bitfield_size");
return -EINVAL;
}
bytes_offset = BITS_ROUNDDOWN_BYTES(struct_bits_off);
nr_copy_bits = nr_bits + BITS_PER_BYTE_MASKED(struct_bits_off);
if (nr_copy_bits > BITS_PER_U128) {
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
btf_verifier_log_member(env, struct_type, member,
"nr_copy_bits exceeds 128");
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
return -EINVAL;
}
if (struct_size < bytes_offset ||
struct_size - bytes_offset < BITS_ROUNDUP_BYTES(nr_copy_bits)) {
btf_verifier_log_member(env, struct_type, member,
"Member exceeds struct_size");
return -EINVAL;
}
return 0;
}
static s32 btf_int_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
u32 int_data, nr_bits, meta_needed = sizeof(int_data);
u16 encoding;
if (meta_left < meta_needed) {
btf_verifier_log_basic(env, t,
"meta_left:%u meta_needed:%u",
meta_left, meta_needed);
return -EINVAL;
}
if (btf_type_vlen(t)) {
btf_verifier_log_type(env, t, "vlen != 0");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
int_data = btf_type_int(t);
if (int_data & ~BTF_INT_MASK) {
btf_verifier_log_basic(env, t, "Invalid int_data:%x",
int_data);
return -EINVAL;
}
nr_bits = BTF_INT_BITS(int_data) + BTF_INT_OFFSET(int_data);
if (nr_bits > BITS_PER_U128) {
btf_verifier_log_type(env, t, "nr_bits exceeds %zu",
BITS_PER_U128);
return -EINVAL;
}
if (BITS_ROUNDUP_BYTES(nr_bits) > t->size) {
btf_verifier_log_type(env, t, "nr_bits exceeds type_size");
return -EINVAL;
}
/*
* Only one of the encoding bits is allowed and it
* should be sufficient for the pretty print purpose (i.e. decoding).
* Multiple bits can be allowed later if it is found
* to be insufficient.
*/
encoding = BTF_INT_ENCODING(int_data);
if (encoding &&
encoding != BTF_INT_SIGNED &&
encoding != BTF_INT_CHAR &&
encoding != BTF_INT_BOOL) {
btf_verifier_log_type(env, t, "Unsupported encoding");
return -ENOTSUPP;
}
btf_verifier_log_type(env, t, NULL);
return meta_needed;
}
static void btf_int_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
int int_data = btf_type_int(t);
btf_verifier_log(env,
"size=%u bits_offset=%u nr_bits=%u encoding=%s",
t->size, BTF_INT_OFFSET(int_data),
BTF_INT_BITS(int_data),
btf_int_encoding_str(BTF_INT_ENCODING(int_data)));
}
static void btf_int128_print(struct seq_file *m, void *data)
{
/* data points to a __int128 number.
* Suppose
* int128_num = *(__int128 *)data;
* The below formulas shows what upper_num and lower_num represents:
* upper_num = int128_num >> 64;
* lower_num = int128_num & 0xffffffffFFFFFFFFULL;
*/
u64 upper_num, lower_num;
#ifdef __BIG_ENDIAN_BITFIELD
upper_num = *(u64 *)data;
lower_num = *(u64 *)(data + 8);
#else
upper_num = *(u64 *)(data + 8);
lower_num = *(u64 *)data;
#endif
if (upper_num == 0)
seq_printf(m, "0x%llx", lower_num);
else
seq_printf(m, "0x%llx%016llx", upper_num, lower_num);
}
static void btf_int128_shift(u64 *print_num, u16 left_shift_bits,
u16 right_shift_bits)
{
u64 upper_num, lower_num;
#ifdef __BIG_ENDIAN_BITFIELD
upper_num = print_num[0];
lower_num = print_num[1];
#else
upper_num = print_num[1];
lower_num = print_num[0];
#endif
/* shake out un-needed bits by shift/or operations */
if (left_shift_bits >= 64) {
upper_num = lower_num << (left_shift_bits - 64);
lower_num = 0;
} else {
upper_num = (upper_num << left_shift_bits) |
(lower_num >> (64 - left_shift_bits));
lower_num = lower_num << left_shift_bits;
}
if (right_shift_bits >= 64) {
lower_num = upper_num >> (right_shift_bits - 64);
upper_num = 0;
} else {
lower_num = (lower_num >> right_shift_bits) |
(upper_num << (64 - right_shift_bits));
upper_num = upper_num >> right_shift_bits;
}
#ifdef __BIG_ENDIAN_BITFIELD
print_num[0] = upper_num;
print_num[1] = lower_num;
#else
print_num[0] = lower_num;
print_num[1] = upper_num;
#endif
}
static void btf_bitfield_seq_show(void *data, u8 bits_offset,
u8 nr_bits, struct seq_file *m)
{
u16 left_shift_bits, right_shift_bits;
u8 nr_copy_bytes;
u8 nr_copy_bits;
u64 print_num[2] = {};
nr_copy_bits = nr_bits + bits_offset;
nr_copy_bytes = BITS_ROUNDUP_BYTES(nr_copy_bits);
memcpy(print_num, data, nr_copy_bytes);
#ifdef __BIG_ENDIAN_BITFIELD
left_shift_bits = bits_offset;
#else
left_shift_bits = BITS_PER_U128 - nr_copy_bits;
#endif
right_shift_bits = BITS_PER_U128 - nr_bits;
btf_int128_shift(print_num, left_shift_bits, right_shift_bits);
btf_int128_print(m, print_num);
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
static void btf_int_bits_seq_show(const struct btf *btf,
const struct btf_type *t,
void *data, u8 bits_offset,
struct seq_file *m)
{
u32 int_data = btf_type_int(t);
u8 nr_bits = BTF_INT_BITS(int_data);
u8 total_bits_offset;
/*
* bits_offset is at most 7.
* BTF_INT_OFFSET() cannot exceed 128 bits.
*/
total_bits_offset = bits_offset + BTF_INT_OFFSET(int_data);
data += BITS_ROUNDDOWN_BYTES(total_bits_offset);
bits_offset = BITS_PER_BYTE_MASKED(total_bits_offset);
btf_bitfield_seq_show(data, bits_offset, nr_bits, m);
}
static void btf_int_seq_show(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offset,
struct seq_file *m)
{
u32 int_data = btf_type_int(t);
u8 encoding = BTF_INT_ENCODING(int_data);
bool sign = encoding & BTF_INT_SIGNED;
u8 nr_bits = BTF_INT_BITS(int_data);
if (bits_offset || BTF_INT_OFFSET(int_data) ||
BITS_PER_BYTE_MASKED(nr_bits)) {
btf_int_bits_seq_show(btf, t, data, bits_offset, m);
return;
}
switch (nr_bits) {
case 128:
btf_int128_print(m, data);
break;
case 64:
if (sign)
seq_printf(m, "%lld", *(s64 *)data);
else
seq_printf(m, "%llu", *(u64 *)data);
break;
case 32:
if (sign)
seq_printf(m, "%d", *(s32 *)data);
else
seq_printf(m, "%u", *(u32 *)data);
break;
case 16:
if (sign)
seq_printf(m, "%d", *(s16 *)data);
else
seq_printf(m, "%u", *(u16 *)data);
break;
case 8:
if (sign)
seq_printf(m, "%d", *(s8 *)data);
else
seq_printf(m, "%u", *(u8 *)data);
break;
default:
btf_int_bits_seq_show(btf, t, data, bits_offset, m);
}
}
static const struct btf_kind_operations int_ops = {
.check_meta = btf_int_check_meta,
.resolve = btf_df_resolve,
.check_member = btf_int_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_int_check_kflag_member,
.log_details = btf_int_log,
.seq_show = btf_int_seq_show,
};
static int btf_modifier_check_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
const struct btf_type *resolved_type;
u32 resolved_type_id = member->type;
struct btf_member resolved_member;
struct btf *btf = env->btf;
resolved_type = btf_type_id_size(btf, &resolved_type_id, NULL);
if (!resolved_type) {
btf_verifier_log_member(env, struct_type, member,
"Invalid member");
return -EINVAL;
}
resolved_member = *member;
resolved_member.type = resolved_type_id;
return btf_type_ops(resolved_type)->check_member(env, struct_type,
&resolved_member,
resolved_type);
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
static int btf_modifier_check_kflag_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
const struct btf_type *resolved_type;
u32 resolved_type_id = member->type;
struct btf_member resolved_member;
struct btf *btf = env->btf;
resolved_type = btf_type_id_size(btf, &resolved_type_id, NULL);
if (!resolved_type) {
btf_verifier_log_member(env, struct_type, member,
"Invalid member");
return -EINVAL;
}
resolved_member = *member;
resolved_member.type = resolved_type_id;
return btf_type_ops(resolved_type)->check_kflag_member(env, struct_type,
&resolved_member,
resolved_type);
}
static int btf_ptr_check_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
u32 struct_size, struct_bits_off, bytes_offset;
struct_size = struct_type->size;
struct_bits_off = member->offset;
bytes_offset = BITS_ROUNDDOWN_BYTES(struct_bits_off);
if (BITS_PER_BYTE_MASKED(struct_bits_off)) {
btf_verifier_log_member(env, struct_type, member,
"Member is not byte aligned");
return -EINVAL;
}
if (struct_size - bytes_offset < sizeof(void *)) {
btf_verifier_log_member(env, struct_type, member,
"Member exceeds struct_size");
return -EINVAL;
}
return 0;
}
static int btf_ref_type_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
if (btf_type_vlen(t)) {
btf_verifier_log_type(env, t, "vlen != 0");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
if (!BTF_TYPE_ID_VALID(t->type)) {
btf_verifier_log_type(env, t, "Invalid type_id");
return -EINVAL;
}
/* typedef type must have a valid name, and other ref types,
* volatile, const, restrict, should have a null name.
*/
if (BTF_INFO_KIND(t->info) == BTF_KIND_TYPEDEF) {
if (!t->name_off ||
!btf_name_valid_identifier(env->btf, t->name_off)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
} else {
if (t->name_off) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
}
btf_verifier_log_type(env, t, NULL);
return 0;
}
static int btf_modifier_resolve(struct btf_verifier_env *env,
const struct resolve_vertex *v)
{
const struct btf_type *t = v->t;
const struct btf_type *next_type;
u32 next_type_id = t->type;
struct btf *btf = env->btf;
next_type = btf_type_by_id(btf, next_type_id);
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (!next_type || btf_type_is_resolve_source_only(next_type)) {
btf_verifier_log_type(env, v->t, "Invalid type_id");
return -EINVAL;
}
if (!env_type_is_resolve_sink(env, next_type) &&
!env_type_is_resolved(env, next_type_id))
return env_stack_push(env, next_type, next_type_id);
/* Figure out the resolved next_type_id with size.
* They will be stored in the current modifier's
* resolved_ids and resolved_sizes such that it can
* save us a few type-following when we use it later (e.g. in
* pretty print).
*/
bpf: fix BTF verifier size resolution logic BTF verifier has a size resolution bug which in some circumstances leads to invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have [1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer context ARRAY size won't be resolved (because for pointer it doesn't matter, so it's a sink in pointer context), but it will be permanently remembered as zero for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will be resolved correctly, but TYPEDEF resolved_size won't be updated anymore. This, subsequently, will lead to erroneous map creation failure, if that TYPEDEF is specified as either key or value, as key_size/value_size won't correspond to resolved size of TYPEDEF (kernel will believe it's zero). Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already calculated and stored. This bug manifests itself in rejecting BTF-defined maps that use array typedef as a value type: typedef int array_t[16]; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(value, array_t); /* i.e., array_t *value; */ } test_map SEC(".maps"); The fix consists on not relying on modifier's resolved_size and instead using modifier's resolved_id (type ID for "concrete" type to which modifier eventually resolves) and doing size determination for that resolved type. This allow to preserve existing "early DFS termination" logic for PTR or STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier types. Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-13 01:25:55 +08:00
if (!btf_type_id_size(btf, &next_type_id, NULL)) {
if (env_type_is_resolved(env, next_type_id))
next_type = btf_type_id_resolve(btf, &next_type_id);
/* "typedef void new_void", "const void"...etc */
if (!btf_type_is_void(next_type) &&
!btf_type_is_fwd(next_type) &&
!btf_type_is_func_proto(next_type)) {
btf_verifier_log_type(env, v->t, "Invalid type_id");
return -EINVAL;
}
}
bpf: fix BTF verifier size resolution logic BTF verifier has a size resolution bug which in some circumstances leads to invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have [1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer context ARRAY size won't be resolved (because for pointer it doesn't matter, so it's a sink in pointer context), but it will be permanently remembered as zero for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will be resolved correctly, but TYPEDEF resolved_size won't be updated anymore. This, subsequently, will lead to erroneous map creation failure, if that TYPEDEF is specified as either key or value, as key_size/value_size won't correspond to resolved size of TYPEDEF (kernel will believe it's zero). Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already calculated and stored. This bug manifests itself in rejecting BTF-defined maps that use array typedef as a value type: typedef int array_t[16]; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(value, array_t); /* i.e., array_t *value; */ } test_map SEC(".maps"); The fix consists on not relying on modifier's resolved_size and instead using modifier's resolved_id (type ID for "concrete" type to which modifier eventually resolves) and doing size determination for that resolved type. This allow to preserve existing "early DFS termination" logic for PTR or STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier types. Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-13 01:25:55 +08:00
env_stack_pop_resolved(env, next_type_id, 0);
return 0;
}
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
static int btf_var_resolve(struct btf_verifier_env *env,
const struct resolve_vertex *v)
{
const struct btf_type *next_type;
const struct btf_type *t = v->t;
u32 next_type_id = t->type;
struct btf *btf = env->btf;
next_type = btf_type_by_id(btf, next_type_id);
if (!next_type || btf_type_is_resolve_source_only(next_type)) {
btf_verifier_log_type(env, v->t, "Invalid type_id");
return -EINVAL;
}
if (!env_type_is_resolve_sink(env, next_type) &&
!env_type_is_resolved(env, next_type_id))
return env_stack_push(env, next_type, next_type_id);
if (btf_type_is_modifier(next_type)) {
const struct btf_type *resolved_type;
u32 resolved_type_id;
resolved_type_id = next_type_id;
resolved_type = btf_type_id_resolve(btf, &resolved_type_id);
if (btf_type_is_ptr(resolved_type) &&
!env_type_is_resolve_sink(env, resolved_type) &&
!env_type_is_resolved(env, resolved_type_id))
return env_stack_push(env, resolved_type,
resolved_type_id);
}
/* We must resolve to something concrete at this point, no
* forward types or similar that would resolve to size of
* zero is allowed.
*/
bpf: fix BTF verifier size resolution logic BTF verifier has a size resolution bug which in some circumstances leads to invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have [1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer context ARRAY size won't be resolved (because for pointer it doesn't matter, so it's a sink in pointer context), but it will be permanently remembered as zero for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will be resolved correctly, but TYPEDEF resolved_size won't be updated anymore. This, subsequently, will lead to erroneous map creation failure, if that TYPEDEF is specified as either key or value, as key_size/value_size won't correspond to resolved size of TYPEDEF (kernel will believe it's zero). Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already calculated and stored. This bug manifests itself in rejecting BTF-defined maps that use array typedef as a value type: typedef int array_t[16]; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(value, array_t); /* i.e., array_t *value; */ } test_map SEC(".maps"); The fix consists on not relying on modifier's resolved_size and instead using modifier's resolved_id (type ID for "concrete" type to which modifier eventually resolves) and doing size determination for that resolved type. This allow to preserve existing "early DFS termination" logic for PTR or STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier types. Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-13 01:25:55 +08:00
if (!btf_type_id_size(btf, &next_type_id, NULL)) {
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
btf_verifier_log_type(env, v->t, "Invalid type_id");
return -EINVAL;
}
bpf: fix BTF verifier size resolution logic BTF verifier has a size resolution bug which in some circumstances leads to invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have [1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer context ARRAY size won't be resolved (because for pointer it doesn't matter, so it's a sink in pointer context), but it will be permanently remembered as zero for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will be resolved correctly, but TYPEDEF resolved_size won't be updated anymore. This, subsequently, will lead to erroneous map creation failure, if that TYPEDEF is specified as either key or value, as key_size/value_size won't correspond to resolved size of TYPEDEF (kernel will believe it's zero). Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already calculated and stored. This bug manifests itself in rejecting BTF-defined maps that use array typedef as a value type: typedef int array_t[16]; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(value, array_t); /* i.e., array_t *value; */ } test_map SEC(".maps"); The fix consists on not relying on modifier's resolved_size and instead using modifier's resolved_id (type ID for "concrete" type to which modifier eventually resolves) and doing size determination for that resolved type. This allow to preserve existing "early DFS termination" logic for PTR or STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier types. Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-13 01:25:55 +08:00
env_stack_pop_resolved(env, next_type_id, 0);
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
return 0;
}
static int btf_ptr_resolve(struct btf_verifier_env *env,
const struct resolve_vertex *v)
{
const struct btf_type *next_type;
const struct btf_type *t = v->t;
u32 next_type_id = t->type;
struct btf *btf = env->btf;
next_type = btf_type_by_id(btf, next_type_id);
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (!next_type || btf_type_is_resolve_source_only(next_type)) {
btf_verifier_log_type(env, v->t, "Invalid type_id");
return -EINVAL;
}
if (!env_type_is_resolve_sink(env, next_type) &&
!env_type_is_resolved(env, next_type_id))
return env_stack_push(env, next_type, next_type_id);
/* If the modifier was RESOLVED during RESOLVE_STRUCT_OR_ARRAY,
* the modifier may have stopped resolving when it was resolved
* to a ptr (last-resolved-ptr).
*
* We now need to continue from the last-resolved-ptr to
* ensure the last-resolved-ptr will not referring back to
* the currenct ptr (t).
*/
if (btf_type_is_modifier(next_type)) {
const struct btf_type *resolved_type;
u32 resolved_type_id;
resolved_type_id = next_type_id;
resolved_type = btf_type_id_resolve(btf, &resolved_type_id);
if (btf_type_is_ptr(resolved_type) &&
!env_type_is_resolve_sink(env, resolved_type) &&
!env_type_is_resolved(env, resolved_type_id))
return env_stack_push(env, resolved_type,
resolved_type_id);
}
if (!btf_type_id_size(btf, &next_type_id, NULL)) {
if (env_type_is_resolved(env, next_type_id))
next_type = btf_type_id_resolve(btf, &next_type_id);
if (!btf_type_is_void(next_type) &&
!btf_type_is_fwd(next_type) &&
!btf_type_is_func_proto(next_type)) {
btf_verifier_log_type(env, v->t, "Invalid type_id");
return -EINVAL;
}
}
env_stack_pop_resolved(env, next_type_id, 0);
return 0;
}
static void btf_modifier_seq_show(const struct btf *btf,
const struct btf_type *t,
u32 type_id, void *data,
u8 bits_offset, struct seq_file *m)
{
t = btf_type_id_resolve(btf, &type_id);
btf_type_ops(t)->seq_show(btf, t, type_id, data, bits_offset, m);
}
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
static void btf_var_seq_show(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offset,
struct seq_file *m)
{
t = btf_type_id_resolve(btf, &type_id);
btf_type_ops(t)->seq_show(btf, t, type_id, data, bits_offset, m);
}
static void btf_ptr_seq_show(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offset,
struct seq_file *m)
{
/* It is a hashed value */
seq_printf(m, "%p", *(void **)data);
}
static void btf_ref_type_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
btf_verifier_log(env, "type_id=%u", t->type);
}
static struct btf_kind_operations modifier_ops = {
.check_meta = btf_ref_type_check_meta,
.resolve = btf_modifier_resolve,
.check_member = btf_modifier_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_modifier_check_kflag_member,
.log_details = btf_ref_type_log,
.seq_show = btf_modifier_seq_show,
};
static struct btf_kind_operations ptr_ops = {
.check_meta = btf_ref_type_check_meta,
.resolve = btf_ptr_resolve,
.check_member = btf_ptr_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_generic_check_kflag_member,
.log_details = btf_ref_type_log,
.seq_show = btf_ptr_seq_show,
};
static s32 btf_fwd_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
if (btf_type_vlen(t)) {
btf_verifier_log_type(env, t, "vlen != 0");
return -EINVAL;
}
if (t->type) {
btf_verifier_log_type(env, t, "type != 0");
return -EINVAL;
}
/* fwd type must have a valid name */
if (!t->name_off ||
!btf_name_valid_identifier(env->btf, t->name_off)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
return 0;
}
static void btf_fwd_type_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
btf_verifier_log(env, "%s", btf_type_kflag(t) ? "union" : "struct");
}
static struct btf_kind_operations fwd_ops = {
.check_meta = btf_fwd_check_meta,
.resolve = btf_df_resolve,
.check_member = btf_df_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_df_check_kflag_member,
.log_details = btf_fwd_type_log,
.seq_show = btf_df_seq_show,
};
static int btf_array_check_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
u32 struct_bits_off = member->offset;
u32 struct_size, bytes_offset;
u32 array_type_id, array_size;
struct btf *btf = env->btf;
if (BITS_PER_BYTE_MASKED(struct_bits_off)) {
btf_verifier_log_member(env, struct_type, member,
"Member is not byte aligned");
return -EINVAL;
}
array_type_id = member->type;
btf_type_id_size(btf, &array_type_id, &array_size);
struct_size = struct_type->size;
bytes_offset = BITS_ROUNDDOWN_BYTES(struct_bits_off);
if (struct_size - bytes_offset < array_size) {
btf_verifier_log_member(env, struct_type, member,
"Member exceeds struct_size");
return -EINVAL;
}
return 0;
}
static s32 btf_array_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
const struct btf_array *array = btf_type_array(t);
u32 meta_needed = sizeof(*array);
if (meta_left < meta_needed) {
btf_verifier_log_basic(env, t,
"meta_left:%u meta_needed:%u",
meta_left, meta_needed);
return -EINVAL;
}
/* array type should not have a name */
if (t->name_off) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
if (btf_type_vlen(t)) {
btf_verifier_log_type(env, t, "vlen != 0");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
if (t->size) {
btf_verifier_log_type(env, t, "size != 0");
return -EINVAL;
}
/* Array elem type and index type cannot be in type void,
* so !array->type and !array->index_type are not allowed.
*/
if (!array->type || !BTF_TYPE_ID_VALID(array->type)) {
btf_verifier_log_type(env, t, "Invalid elem");
return -EINVAL;
}
if (!array->index_type || !BTF_TYPE_ID_VALID(array->index_type)) {
btf_verifier_log_type(env, t, "Invalid index");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
return meta_needed;
}
static int btf_array_resolve(struct btf_verifier_env *env,
const struct resolve_vertex *v)
{
const struct btf_array *array = btf_type_array(v->t);
const struct btf_type *elem_type, *index_type;
u32 elem_type_id, index_type_id;
struct btf *btf = env->btf;
u32 elem_size;
/* Check array->index_type */
index_type_id = array->index_type;
index_type = btf_type_by_id(btf, index_type_id);
if (btf_type_nosize_or_null(index_type) ||
btf_type_is_resolve_source_only(index_type)) {
btf_verifier_log_type(env, v->t, "Invalid index");
return -EINVAL;
}
if (!env_type_is_resolve_sink(env, index_type) &&
!env_type_is_resolved(env, index_type_id))
return env_stack_push(env, index_type, index_type_id);
index_type = btf_type_id_size(btf, &index_type_id, NULL);
if (!index_type || !btf_type_is_int(index_type) ||
!btf_type_int_is_regular(index_type)) {
btf_verifier_log_type(env, v->t, "Invalid index");
return -EINVAL;
}
/* Check array->type */
elem_type_id = array->type;
elem_type = btf_type_by_id(btf, elem_type_id);
if (btf_type_nosize_or_null(elem_type) ||
btf_type_is_resolve_source_only(elem_type)) {
btf_verifier_log_type(env, v->t,
"Invalid elem");
return -EINVAL;
}
if (!env_type_is_resolve_sink(env, elem_type) &&
!env_type_is_resolved(env, elem_type_id))
return env_stack_push(env, elem_type, elem_type_id);
elem_type = btf_type_id_size(btf, &elem_type_id, &elem_size);
if (!elem_type) {
btf_verifier_log_type(env, v->t, "Invalid elem");
return -EINVAL;
}
if (btf_type_is_int(elem_type) && !btf_type_int_is_regular(elem_type)) {
btf_verifier_log_type(env, v->t, "Invalid array of int");
return -EINVAL;
}
if (array->nelems && elem_size > U32_MAX / array->nelems) {
btf_verifier_log_type(env, v->t,
"Array size overflows U32_MAX");
return -EINVAL;
}
env_stack_pop_resolved(env, elem_type_id, elem_size * array->nelems);
return 0;
}
static void btf_array_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
const struct btf_array *array = btf_type_array(t);
btf_verifier_log(env, "type_id=%u index_type_id=%u nr_elems=%u",
array->type, array->index_type, array->nelems);
}
static void btf_array_seq_show(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offset,
struct seq_file *m)
{
const struct btf_array *array = btf_type_array(t);
const struct btf_kind_operations *elem_ops;
const struct btf_type *elem_type;
u32 i, elem_size, elem_type_id;
elem_type_id = array->type;
elem_type = btf_type_id_size(btf, &elem_type_id, &elem_size);
elem_ops = btf_type_ops(elem_type);
seq_puts(m, "[");
for (i = 0; i < array->nelems; i++) {
if (i)
seq_puts(m, ",");
elem_ops->seq_show(btf, elem_type, elem_type_id, data,
bits_offset, m);
data += elem_size;
}
seq_puts(m, "]");
}
static struct btf_kind_operations array_ops = {
.check_meta = btf_array_check_meta,
.resolve = btf_array_resolve,
.check_member = btf_array_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_generic_check_kflag_member,
.log_details = btf_array_log,
.seq_show = btf_array_seq_show,
};
static int btf_struct_check_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
u32 struct_bits_off = member->offset;
u32 struct_size, bytes_offset;
if (BITS_PER_BYTE_MASKED(struct_bits_off)) {
btf_verifier_log_member(env, struct_type, member,
"Member is not byte aligned");
return -EINVAL;
}
struct_size = struct_type->size;
bytes_offset = BITS_ROUNDDOWN_BYTES(struct_bits_off);
if (struct_size - bytes_offset < member_type->size) {
btf_verifier_log_member(env, struct_type, member,
"Member exceeds struct_size");
return -EINVAL;
}
return 0;
}
static s32 btf_struct_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
bool is_union = BTF_INFO_KIND(t->info) == BTF_KIND_UNION;
const struct btf_member *member;
u32 meta_needed, last_offset;
struct btf *btf = env->btf;
u32 struct_size = t->size;
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
u32 offset;
u16 i;
meta_needed = btf_type_vlen(t) * sizeof(*member);
if (meta_left < meta_needed) {
btf_verifier_log_basic(env, t,
"meta_left:%u meta_needed:%u",
meta_left, meta_needed);
return -EINVAL;
}
/* struct type either no name or a valid one */
if (t->name_off &&
!btf_name_valid_identifier(env->btf, t->name_off)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
last_offset = 0;
for_each_member(i, t, member) {
if (!btf_name_offset_valid(btf, member->name_off)) {
btf_verifier_log_member(env, t, member,
"Invalid member name_offset:%u",
member->name_off);
return -EINVAL;
}
/* struct member either no name or a valid one */
if (member->name_off &&
!btf_name_valid_identifier(btf, member->name_off)) {
btf_verifier_log_member(env, t, member, "Invalid name");
return -EINVAL;
}
/* A member cannot be in type void */
if (!member->type || !BTF_TYPE_ID_VALID(member->type)) {
btf_verifier_log_member(env, t, member,
"Invalid type_id");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
offset = btf_member_bit_offset(t, member);
if (is_union && offset) {
btf_verifier_log_member(env, t, member,
"Invalid member bits_offset");
return -EINVAL;
}
/*
* ">" instead of ">=" because the last member could be
* "char a[0];"
*/
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (last_offset > offset) {
btf_verifier_log_member(env, t, member,
"Invalid member bits_offset");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (BITS_ROUNDUP_BYTES(offset) > struct_size) {
btf_verifier_log_member(env, t, member,
"Member bits_offset exceeds its struct size");
return -EINVAL;
}
btf_verifier_log_member(env, t, member, NULL);
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
last_offset = offset;
}
return meta_needed;
}
static int btf_struct_resolve(struct btf_verifier_env *env,
const struct resolve_vertex *v)
{
const struct btf_member *member;
int err;
u16 i;
/* Before continue resolving the next_member,
* ensure the last member is indeed resolved to a
* type with size info.
*/
if (v->next_member) {
const struct btf_type *last_member_type;
const struct btf_member *last_member;
u16 last_member_type_id;
last_member = btf_type_member(v->t) + v->next_member - 1;
last_member_type_id = last_member->type;
if (WARN_ON_ONCE(!env_type_is_resolved(env,
last_member_type_id)))
return -EINVAL;
last_member_type = btf_type_by_id(env->btf,
last_member_type_id);
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(v->t))
err = btf_type_ops(last_member_type)->check_kflag_member(env, v->t,
last_member,
last_member_type);
else
err = btf_type_ops(last_member_type)->check_member(env, v->t,
last_member,
last_member_type);
if (err)
return err;
}
for_each_member_from(i, v->next_member, v->t, member) {
u32 member_type_id = member->type;
const struct btf_type *member_type = btf_type_by_id(env->btf,
member_type_id);
if (btf_type_nosize_or_null(member_type) ||
btf_type_is_resolve_source_only(member_type)) {
btf_verifier_log_member(env, v->t, member,
"Invalid member");
return -EINVAL;
}
if (!env_type_is_resolve_sink(env, member_type) &&
!env_type_is_resolved(env, member_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, member_type, member_type_id);
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(v->t))
err = btf_type_ops(member_type)->check_kflag_member(env, v->t,
member,
member_type);
else
err = btf_type_ops(member_type)->check_member(env, v->t,
member,
member_type);
if (err)
return err;
}
env_stack_pop_resolved(env, 0, 0);
return 0;
}
static void btf_struct_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
btf_verifier_log(env, "size=%u vlen=%u", t->size, btf_type_vlen(t));
}
bpf: introduce bpf_spin_lock Introduce 'struct bpf_spin_lock' and bpf_spin_lock/unlock() helpers to let bpf program serialize access to other variables. Example: struct hash_elem { int cnt; struct bpf_spin_lock lock; }; struct hash_elem * val = bpf_map_lookup_elem(&hash_map, &key); if (val) { bpf_spin_lock(&val->lock); val->cnt++; bpf_spin_unlock(&val->lock); } Restrictions and safety checks: - bpf_spin_lock is only allowed inside HASH and ARRAY maps. - BTF description of the map is mandatory for safety analysis. - bpf program can take one bpf_spin_lock at a time, since two or more can cause dead locks. - only one 'struct bpf_spin_lock' is allowed per map element. It drastically simplifies implementation yet allows bpf program to use any number of bpf_spin_locks. - when bpf_spin_lock is taken the calls (either bpf2bpf or helpers) are not allowed. - bpf program must bpf_spin_unlock() before return. - bpf program can access 'struct bpf_spin_lock' only via bpf_spin_lock()/bpf_spin_unlock() helpers. - load/store into 'struct bpf_spin_lock lock;' field is not allowed. - to use bpf_spin_lock() helper the BTF description of map value must be a struct and have 'struct bpf_spin_lock anyname;' field at the top level. Nested lock inside another struct is not allowed. - syscall map_lookup doesn't copy bpf_spin_lock field to user space. - syscall map_update and program map_update do not update bpf_spin_lock field. - bpf_spin_lock cannot be on the stack or inside networking packet. bpf_spin_lock can only be inside HASH or ARRAY map value. - bpf_spin_lock is available to root only and to all program types. - bpf_spin_lock is not allowed in inner maps of map-in-map. - ld_abs is not allowed inside spin_lock-ed region. - tracing progs and socket filter progs cannot use bpf_spin_lock due to insufficient preemption checks Implementation details: - cgroup-bpf class of programs can nest with xdp/tc programs. Hence bpf_spin_lock is equivalent to spin_lock_irqsave. Other solutions to avoid nested bpf_spin_lock are possible. Like making sure that all networking progs run with softirq disabled. spin_lock_irqsave is the simplest and doesn't add overhead to the programs that don't use it. - arch_spinlock_t is used when its implemented as queued_spin_lock - archs can force their own arch_spinlock_t - on architectures where queued_spin_lock is not available and sizeof(arch_spinlock_t) != sizeof(__u32) trivial lock is used. - presence of bpf_spin_lock inside map value could have been indicated via extra flag during map_create, but specifying it via BTF is cleaner. It provides introspection for map key/value and reduces user mistakes. Next steps: - allow bpf_spin_lock in other map types (like cgroup local storage) - introduce BPF_F_LOCK flag for bpf_map_update() syscall and helper to request kernel to grab bpf_spin_lock before rewriting the value. That will serialize access to map elements. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 07:40:04 +08:00
/* find 'struct bpf_spin_lock' in map value.
* return >= 0 offset if found
* and < 0 in case of error
*/
int btf_find_spin_lock(const struct btf *btf, const struct btf_type *t)
{
const struct btf_member *member;
u32 i, off = -ENOENT;
if (!__btf_type_is_struct(t))
return -EINVAL;
for_each_member(i, t, member) {
const struct btf_type *member_type = btf_type_by_id(btf,
member->type);
if (!__btf_type_is_struct(member_type))
continue;
if (member_type->size != sizeof(struct bpf_spin_lock))
continue;
if (strcmp(__btf_name_by_offset(btf, member_type->name_off),
"bpf_spin_lock"))
continue;
if (off != -ENOENT)
/* only one 'struct bpf_spin_lock' is allowed */
return -E2BIG;
off = btf_member_bit_offset(t, member);
if (off % 8)
/* valid C code cannot generate such BTF */
return -EINVAL;
off /= 8;
if (off % __alignof__(struct bpf_spin_lock))
/* valid struct bpf_spin_lock will be 4 byte aligned */
return -EINVAL;
}
return off;
}
static void btf_struct_seq_show(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offset,
struct seq_file *m)
{
const char *seq = BTF_INFO_KIND(t->info) == BTF_KIND_UNION ? "|" : ",";
const struct btf_member *member;
u32 i;
seq_puts(m, "{");
for_each_member(i, t, member) {
const struct btf_type *member_type = btf_type_by_id(btf,
member->type);
const struct btf_kind_operations *ops;
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
u32 member_offset, bitfield_size;
u32 bytes_offset;
u8 bits8_offset;
if (i)
seq_puts(m, seq);
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
member_offset = btf_member_bit_offset(t, member);
bitfield_size = btf_member_bitfield_size(t, member);
bytes_offset = BITS_ROUNDDOWN_BYTES(member_offset);
bits8_offset = BITS_PER_BYTE_MASKED(member_offset);
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (bitfield_size) {
btf_bitfield_seq_show(data + bytes_offset, bits8_offset,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
bitfield_size, m);
} else {
ops = btf_type_ops(member_type);
ops->seq_show(btf, member_type, member->type,
data + bytes_offset, bits8_offset, m);
}
}
seq_puts(m, "}");
}
static struct btf_kind_operations struct_ops = {
.check_meta = btf_struct_check_meta,
.resolve = btf_struct_resolve,
.check_member = btf_struct_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_generic_check_kflag_member,
.log_details = btf_struct_log,
.seq_show = btf_struct_seq_show,
};
static int btf_enum_check_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
u32 struct_bits_off = member->offset;
u32 struct_size, bytes_offset;
if (BITS_PER_BYTE_MASKED(struct_bits_off)) {
btf_verifier_log_member(env, struct_type, member,
"Member is not byte aligned");
return -EINVAL;
}
struct_size = struct_type->size;
bytes_offset = BITS_ROUNDDOWN_BYTES(struct_bits_off);
if (struct_size - bytes_offset < sizeof(int)) {
btf_verifier_log_member(env, struct_type, member,
"Member exceeds struct_size");
return -EINVAL;
}
return 0;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
static int btf_enum_check_kflag_member(struct btf_verifier_env *env,
const struct btf_type *struct_type,
const struct btf_member *member,
const struct btf_type *member_type)
{
u32 struct_bits_off, nr_bits, bytes_end, struct_size;
u32 int_bitsize = sizeof(int) * BITS_PER_BYTE;
struct_bits_off = BTF_MEMBER_BIT_OFFSET(member->offset);
nr_bits = BTF_MEMBER_BITFIELD_SIZE(member->offset);
if (!nr_bits) {
if (BITS_PER_BYTE_MASKED(struct_bits_off)) {
btf_verifier_log_member(env, struct_type, member,
"Member is not byte aligned");
return -EINVAL;
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
}
nr_bits = int_bitsize;
} else if (nr_bits > int_bitsize) {
btf_verifier_log_member(env, struct_type, member,
"Invalid member bitfield_size");
return -EINVAL;
}
struct_size = struct_type->size;
bytes_end = BITS_ROUNDUP_BYTES(struct_bits_off + nr_bits);
if (struct_size < bytes_end) {
btf_verifier_log_member(env, struct_type, member,
"Member exceeds struct_size");
return -EINVAL;
}
return 0;
}
static s32 btf_enum_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
const struct btf_enum *enums = btf_type_enum(t);
struct btf *btf = env->btf;
u16 i, nr_enums;
u32 meta_needed;
nr_enums = btf_type_vlen(t);
meta_needed = nr_enums * sizeof(*enums);
if (meta_left < meta_needed) {
btf_verifier_log_basic(env, t,
"meta_left:%u meta_needed:%u",
meta_left, meta_needed);
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
if (t->size > 8 || !is_power_of_2(t->size)) {
btf_verifier_log_type(env, t, "Unexpected size");
return -EINVAL;
}
/* enum type either no name or a valid one */
if (t->name_off &&
!btf_name_valid_identifier(env->btf, t->name_off)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
for (i = 0; i < nr_enums; i++) {
if (!btf_name_offset_valid(btf, enums[i].name_off)) {
btf_verifier_log(env, "\tInvalid name_offset:%u",
enums[i].name_off);
return -EINVAL;
}
/* enum member must have a valid name */
if (!enums[i].name_off ||
!btf_name_valid_identifier(btf, enums[i].name_off)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
if (env->log.level == BPF_LOG_KERNEL)
continue;
btf_verifier_log(env, "\t%s val=%d\n",
2018-12-14 02:41:46 +08:00
__btf_name_by_offset(btf, enums[i].name_off),
enums[i].val);
}
return meta_needed;
}
static void btf_enum_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
btf_verifier_log(env, "size=%u vlen=%u", t->size, btf_type_vlen(t));
}
static void btf_enum_seq_show(const struct btf *btf, const struct btf_type *t,
u32 type_id, void *data, u8 bits_offset,
struct seq_file *m)
{
const struct btf_enum *enums = btf_type_enum(t);
u32 i, nr_enums = btf_type_vlen(t);
int v = *(int *)data;
for (i = 0; i < nr_enums; i++) {
if (v == enums[i].val) {
seq_printf(m, "%s",
2018-12-14 02:41:46 +08:00
__btf_name_by_offset(btf,
enums[i].name_off));
return;
}
}
seq_printf(m, "%d", v);
}
static struct btf_kind_operations enum_ops = {
.check_meta = btf_enum_check_meta,
.resolve = btf_df_resolve,
.check_member = btf_enum_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_enum_check_kflag_member,
.log_details = btf_enum_log,
.seq_show = btf_enum_seq_show,
};
static s32 btf_func_proto_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
u32 meta_needed = btf_type_vlen(t) * sizeof(struct btf_param);
if (meta_left < meta_needed) {
btf_verifier_log_basic(env, t,
"meta_left:%u meta_needed:%u",
meta_left, meta_needed);
return -EINVAL;
}
if (t->name_off) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
return meta_needed;
}
static void btf_func_proto_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
const struct btf_param *args = (const struct btf_param *)(t + 1);
u16 nr_args = btf_type_vlen(t), i;
btf_verifier_log(env, "return=%u args=(", t->type);
if (!nr_args) {
btf_verifier_log(env, "void");
goto done;
}
if (nr_args == 1 && !args[0].type) {
/* Only one vararg */
btf_verifier_log(env, "vararg");
goto done;
}
btf_verifier_log(env, "%u %s", args[0].type,
2018-12-14 02:41:46 +08:00
__btf_name_by_offset(env->btf,
args[0].name_off));
for (i = 1; i < nr_args - 1; i++)
btf_verifier_log(env, ", %u %s", args[i].type,
2018-12-14 02:41:46 +08:00
__btf_name_by_offset(env->btf,
args[i].name_off));
if (nr_args > 1) {
const struct btf_param *last_arg = &args[nr_args - 1];
if (last_arg->type)
btf_verifier_log(env, ", %u %s", last_arg->type,
2018-12-14 02:41:46 +08:00
__btf_name_by_offset(env->btf,
last_arg->name_off));
else
btf_verifier_log(env, ", vararg");
}
done:
btf_verifier_log(env, ")");
}
static struct btf_kind_operations func_proto_ops = {
.check_meta = btf_func_proto_check_meta,
.resolve = btf_df_resolve,
/*
* BTF_KIND_FUNC_PROTO cannot be directly referred by
* a struct's member.
*
* It should be a funciton pointer instead.
* (i.e. struct's member -> BTF_KIND_PTR -> BTF_KIND_FUNC_PROTO)
*
* Hence, there is no btf_func_check_member().
*/
.check_member = btf_df_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_df_check_kflag_member,
.log_details = btf_func_proto_log,
.seq_show = btf_df_seq_show,
};
static s32 btf_func_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
if (!t->name_off ||
!btf_name_valid_identifier(env->btf, t->name_off)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
if (btf_type_vlen(t)) {
btf_verifier_log_type(env, t, "vlen != 0");
return -EINVAL;
}
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
return 0;
}
static struct btf_kind_operations func_ops = {
.check_meta = btf_func_check_meta,
.resolve = btf_df_resolve,
.check_member = btf_df_check_member,
bpf: btf: fix struct/union/fwd types with kind_flag This patch fixed two issues with BTF. One is related to struct/union bitfield encoding and the other is related to forward type. Issue #1 and solution: ====================== Current btf encoding of bitfield follows what pahole generates. For each bitfield, pahole will duplicate the type chain and put the bitfield size at the final int or enum type. Since the BTF enum type cannot encode bit size, pahole workarounds the issue by generating an int type whenever the enum bit size is not 32. For example, -bash-4.4$ cat t.c typedef int ___int; enum A { A1, A2, A3 }; struct t { int a[5]; ___int b:4; volatile enum A c:4; } g; -bash-4.4$ gcc -c -O2 -g t.c The current kernel supports the following BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t size=24 vlen=3 a type_id=5 bits_offset=0 b type_id=9 bits_offset=160 c type_id=11 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 [8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none) [9] TYPEDEF ___int type_id=8 [10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED [11] VOLATILE (anon) type_id=10 Two issues are in the above: . by changing enum type to int, we lost the original type information and this will not be ideal later when we try to convert BTF to a header file. . the type duplication for bitfields will cause BTF bloat. Duplicated types cannot be deduplicated later if the bitfield size is different. To fix this issue, this patch implemented a compatible change for BTF struct type encoding: . the bit 31 of struct_type->info, previously reserved, now is used to indicate whether bitfield_size is encoded in btf_member or not. . if bit 31 of struct_type->info is set, btf_member->offset will encode like: bit 0 - 23: bit offset bit 24 - 31: bitfield size if bit 31 is not set, the old behavior is preserved: bit 0 - 31: bit offset So if the struct contains a bit field, the maximum bit offset will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum bitfield size will be 256 which is enough for today as maximum bitfield in compiler can be 128 where int128 type is supported. This kernel patch intends to support the new BTF encoding: $ pahole -JV t.o [1] TYPEDEF ___int type_id=2 [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [3] ENUM A size=4 vlen=3 A1 val=0 A2 val=1 A3 val=2 [4] STRUCT t kind_flag=1 size=24 vlen=3 a type_id=5 bitfield_size=0 bits_offset=0 b type_id=1 bitfield_size=4 bits_offset=160 c type_id=7 bitfield_size=4 bits_offset=164 [5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5 [6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none) [7] VOLATILE (anon) type_id=3 Issue #2 and solution: ====================== Current forward type in BTF does not specify whether the original type is struct or union. This will not work for type pretty print and BTF-to-header-file conversion as struct/union must be specified. $ cat tt.c struct t; union u; int foo(struct t *t, union u *u) { return 0; } $ gcc -c -g -O2 tt.c $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t type_id=0 [3] PTR (anon) type_id=2 [4] FWD u type_id=0 [5] PTR (anon) type_id=4 To fix this issue, similar to issue #1, type->info bit 31 is used. If the bit is set, it is union type. Otherwise, it is a struct type. $ pahole -JV tt.o [1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED [2] FWD t kind_flag=0 type_id=0 [3] PTR (anon) kind_flag=0 type_id=2 [4] FWD u kind_flag=1 type_id=0 [5] PTR (anon) kind_flag=0 type_id=4 Pahole/LLVM change: =================== The new kind_flag functionality has been implemented in pahole and llvm: https://github.com/yonghong-song/pahole/tree/bitfield https://github.com/yonghong-song/llvm/tree/bitfield Note that pahole hasn't implemented func/func_proto kind and .BTF.ext. So to print function signature with bpftool, the llvm compiler should be used. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-16 14:13:51 +08:00
.check_kflag_member = btf_df_check_kflag_member,
.log_details = btf_ref_type_log,
.seq_show = btf_df_seq_show,
};
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
static s32 btf_var_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
const struct btf_var *var;
u32 meta_needed = sizeof(*var);
if (meta_left < meta_needed) {
btf_verifier_log_basic(env, t,
"meta_left:%u meta_needed:%u",
meta_left, meta_needed);
return -EINVAL;
}
if (btf_type_vlen(t)) {
btf_verifier_log_type(env, t, "vlen != 0");
return -EINVAL;
}
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
if (!t->name_off ||
!__btf_name_valid(env->btf, t->name_off, true)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
/* A var cannot be in type void */
if (!t->type || !BTF_TYPE_ID_VALID(t->type)) {
btf_verifier_log_type(env, t, "Invalid type_id");
return -EINVAL;
}
var = btf_type_var(t);
if (var->linkage != BTF_VAR_STATIC &&
var->linkage != BTF_VAR_GLOBAL_ALLOCATED) {
btf_verifier_log_type(env, t, "Linkage not supported");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
return meta_needed;
}
static void btf_var_log(struct btf_verifier_env *env, const struct btf_type *t)
{
const struct btf_var *var = btf_type_var(t);
btf_verifier_log(env, "type_id=%u linkage=%u", t->type, var->linkage);
}
static const struct btf_kind_operations var_ops = {
.check_meta = btf_var_check_meta,
.resolve = btf_var_resolve,
.check_member = btf_df_check_member,
.check_kflag_member = btf_df_check_kflag_member,
.log_details = btf_var_log,
.seq_show = btf_var_seq_show,
};
static s32 btf_datasec_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
const struct btf_var_secinfo *vsi;
u64 last_vsi_end_off = 0, sum = 0;
u32 i, meta_needed;
meta_needed = btf_type_vlen(t) * sizeof(*vsi);
if (meta_left < meta_needed) {
btf_verifier_log_basic(env, t,
"meta_left:%u meta_needed:%u",
meta_left, meta_needed);
return -EINVAL;
}
if (!btf_type_vlen(t)) {
btf_verifier_log_type(env, t, "vlen == 0");
return -EINVAL;
}
if (!t->size) {
btf_verifier_log_type(env, t, "size == 0");
return -EINVAL;
}
if (btf_type_kflag(t)) {
btf_verifier_log_type(env, t, "Invalid btf_info kind_flag");
return -EINVAL;
}
if (!t->name_off ||
!btf_name_valid_section(env->btf, t->name_off)) {
btf_verifier_log_type(env, t, "Invalid name");
return -EINVAL;
}
btf_verifier_log_type(env, t, NULL);
for_each_vsi(i, t, vsi) {
/* A var cannot be in type void */
if (!vsi->type || !BTF_TYPE_ID_VALID(vsi->type)) {
btf_verifier_log_vsi(env, t, vsi,
"Invalid type_id");
return -EINVAL;
}
if (vsi->offset < last_vsi_end_off || vsi->offset >= t->size) {
btf_verifier_log_vsi(env, t, vsi,
"Invalid offset");
return -EINVAL;
}
if (!vsi->size || vsi->size > t->size) {
btf_verifier_log_vsi(env, t, vsi,
"Invalid size");
return -EINVAL;
}
last_vsi_end_off = vsi->offset + vsi->size;
if (last_vsi_end_off > t->size) {
btf_verifier_log_vsi(env, t, vsi,
"Invalid offset+size");
return -EINVAL;
}
btf_verifier_log_vsi(env, t, vsi, NULL);
sum += vsi->size;
}
if (t->size < sum) {
btf_verifier_log_type(env, t, "Invalid btf_info size");
return -EINVAL;
}
return meta_needed;
}
static int btf_datasec_resolve(struct btf_verifier_env *env,
const struct resolve_vertex *v)
{
const struct btf_var_secinfo *vsi;
struct btf *btf = env->btf;
u16 i;
for_each_vsi_from(i, v->next_member, v->t, vsi) {
u32 var_type_id = vsi->type, type_id, type_size = 0;
const struct btf_type *var_type = btf_type_by_id(env->btf,
var_type_id);
if (!var_type || !btf_type_is_var(var_type)) {
btf_verifier_log_vsi(env, v->t, vsi,
"Not a VAR kind member");
return -EINVAL;
}
if (!env_type_is_resolve_sink(env, var_type) &&
!env_type_is_resolved(env, var_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, var_type, var_type_id);
}
type_id = var_type->type;
if (!btf_type_id_size(btf, &type_id, &type_size)) {
btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
return -EINVAL;
}
if (vsi->size < type_size) {
btf_verifier_log_vsi(env, v->t, vsi, "Invalid size");
return -EINVAL;
}
}
env_stack_pop_resolved(env, 0, 0);
return 0;
}
static void btf_datasec_log(struct btf_verifier_env *env,
const struct btf_type *t)
{
btf_verifier_log(env, "size=%u vlen=%u", t->size, btf_type_vlen(t));
}
static void btf_datasec_seq_show(const struct btf *btf,
const struct btf_type *t, u32 type_id,
void *data, u8 bits_offset,
struct seq_file *m)
{
const struct btf_var_secinfo *vsi;
const struct btf_type *var;
u32 i;
seq_printf(m, "section (\"%s\") = {", __btf_name_by_offset(btf, t->name_off));
for_each_vsi(i, t, vsi) {
var = btf_type_by_id(btf, vsi->type);
if (i)
seq_puts(m, ",");
btf_type_ops(var)->seq_show(btf, var, vsi->type,
data + vsi->offset, bits_offset, m);
}
seq_puts(m, "}");
}
static const struct btf_kind_operations datasec_ops = {
.check_meta = btf_datasec_check_meta,
.resolve = btf_datasec_resolve,
.check_member = btf_df_check_member,
.check_kflag_member = btf_df_check_kflag_member,
.log_details = btf_datasec_log,
.seq_show = btf_datasec_seq_show,
};
static int btf_func_proto_check(struct btf_verifier_env *env,
const struct btf_type *t)
{
const struct btf_type *ret_type;
const struct btf_param *args;
const struct btf *btf;
u16 nr_args, i;
int err;
btf = env->btf;
args = (const struct btf_param *)(t + 1);
nr_args = btf_type_vlen(t);
/* Check func return type which could be "void" (t->type == 0) */
if (t->type) {
u32 ret_type_id = t->type;
ret_type = btf_type_by_id(btf, ret_type_id);
if (!ret_type) {
btf_verifier_log_type(env, t, "Invalid return type");
return -EINVAL;
}
if (btf_type_needs_resolve(ret_type) &&
!env_type_is_resolved(env, ret_type_id)) {
err = btf_resolve(env, ret_type, ret_type_id);
if (err)
return err;
}
/* Ensure the return type is a type that has a size */
if (!btf_type_id_size(btf, &ret_type_id, NULL)) {
btf_verifier_log_type(env, t, "Invalid return type");
return -EINVAL;
}
}
if (!nr_args)
return 0;
/* Last func arg type_id could be 0 if it is a vararg */
if (!args[nr_args - 1].type) {
if (args[nr_args - 1].name_off) {
btf_verifier_log_type(env, t, "Invalid arg#%u",
nr_args);
return -EINVAL;
}
nr_args--;
}
err = 0;
for (i = 0; i < nr_args; i++) {
const struct btf_type *arg_type;
u32 arg_type_id;
arg_type_id = args[i].type;
arg_type = btf_type_by_id(btf, arg_type_id);
if (!arg_type) {
btf_verifier_log_type(env, t, "Invalid arg#%u", i + 1);
err = -EINVAL;
break;
}
if (args[i].name_off &&
(!btf_name_offset_valid(btf, args[i].name_off) ||
!btf_name_valid_identifier(btf, args[i].name_off))) {
btf_verifier_log_type(env, t,
"Invalid arg#%u", i + 1);
err = -EINVAL;
break;
}
if (btf_type_needs_resolve(arg_type) &&
!env_type_is_resolved(env, arg_type_id)) {
err = btf_resolve(env, arg_type, arg_type_id);
if (err)
break;
}
if (!btf_type_id_size(btf, &arg_type_id, NULL)) {
btf_verifier_log_type(env, t, "Invalid arg#%u", i + 1);
err = -EINVAL;
break;
}
}
return err;
}
static int btf_func_check(struct btf_verifier_env *env,
const struct btf_type *t)
{
const struct btf_type *proto_type;
const struct btf_param *args;
const struct btf *btf;
u16 nr_args, i;
btf = env->btf;
proto_type = btf_type_by_id(btf, t->type);
if (!proto_type || !btf_type_is_func_proto(proto_type)) {
btf_verifier_log_type(env, t, "Invalid type_id");
return -EINVAL;
}
args = (const struct btf_param *)(proto_type + 1);
nr_args = btf_type_vlen(proto_type);
for (i = 0; i < nr_args; i++) {
if (!args[i].name_off && args[i].type) {
btf_verifier_log_type(env, t, "Invalid arg#%u", i + 1);
return -EINVAL;
}
}
return 0;
}
static const struct btf_kind_operations * const kind_ops[NR_BTF_KINDS] = {
[BTF_KIND_INT] = &int_ops,
[BTF_KIND_PTR] = &ptr_ops,
[BTF_KIND_ARRAY] = &array_ops,
[BTF_KIND_STRUCT] = &struct_ops,
[BTF_KIND_UNION] = &struct_ops,
[BTF_KIND_ENUM] = &enum_ops,
[BTF_KIND_FWD] = &fwd_ops,
[BTF_KIND_TYPEDEF] = &modifier_ops,
[BTF_KIND_VOLATILE] = &modifier_ops,
[BTF_KIND_CONST] = &modifier_ops,
[BTF_KIND_RESTRICT] = &modifier_ops,
[BTF_KIND_FUNC] = &func_ops,
[BTF_KIND_FUNC_PROTO] = &func_proto_ops,
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
[BTF_KIND_VAR] = &var_ops,
[BTF_KIND_DATASEC] = &datasec_ops,
};
static s32 btf_check_meta(struct btf_verifier_env *env,
const struct btf_type *t,
u32 meta_left)
{
u32 saved_meta_left = meta_left;
s32 var_meta_size;
if (meta_left < sizeof(*t)) {
btf_verifier_log(env, "[%u] meta_left:%u meta_needed:%zu",
env->log_type_id, meta_left, sizeof(*t));
return -EINVAL;
}
meta_left -= sizeof(*t);
if (t->info & ~BTF_INFO_MASK) {
btf_verifier_log(env, "[%u] Invalid btf_info:%x",
env->log_type_id, t->info);
return -EINVAL;
}
if (BTF_INFO_KIND(t->info) > BTF_KIND_MAX ||
BTF_INFO_KIND(t->info) == BTF_KIND_UNKN) {
btf_verifier_log(env, "[%u] Invalid kind:%u",
env->log_type_id, BTF_INFO_KIND(t->info));
return -EINVAL;
}
if (!btf_name_offset_valid(env->btf, t->name_off)) {
btf_verifier_log(env, "[%u] Invalid name_offset:%u",
env->log_type_id, t->name_off);
return -EINVAL;
}
var_meta_size = btf_type_ops(t)->check_meta(env, t, meta_left);
if (var_meta_size < 0)
return var_meta_size;
meta_left -= var_meta_size;
return saved_meta_left - meta_left;
}
static int btf_check_all_metas(struct btf_verifier_env *env)
{
struct btf *btf = env->btf;
struct btf_header *hdr;
void *cur, *end;
hdr = &btf->hdr;
cur = btf->nohdr_data + hdr->type_off;
end = cur + hdr->type_len;
env->log_type_id = 1;
while (cur < end) {
struct btf_type *t = cur;
s32 meta_size;
meta_size = btf_check_meta(env, t, end - cur);
if (meta_size < 0)
return meta_size;
btf_add_type(env, t);
cur += meta_size;
env->log_type_id++;
}
return 0;
}
static bool btf_resolve_valid(struct btf_verifier_env *env,
const struct btf_type *t,
u32 type_id)
{
struct btf *btf = env->btf;
if (!env_type_is_resolved(env, type_id))
return false;
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (btf_type_is_struct(t) || btf_type_is_datasec(t))
return !btf->resolved_ids[type_id] &&
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
!btf->resolved_sizes[type_id];
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
if (btf_type_is_modifier(t) || btf_type_is_ptr(t) ||
btf_type_is_var(t)) {
t = btf_type_id_resolve(btf, &type_id);
bpf: kernel side support for BTF Var and DataSec This work adds kernel-side verification, logging and seq_show dumping of BTF Var and DataSec kinds which are emitted with latest LLVM. The following constraints apply: BTF Var must have: - Its kind_flag is 0 - Its vlen is 0 - Must point to a valid type - Type must not resolve to a forward type - Size of underlying type must be > 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. in case of static variables inside functions) - Cannot be a member of a struct/union - Linkage so far can either only be static or global/allocated BTF DataSec must have: - Its kind_flag is 0 - Its vlen cannot be 0 - Its size cannot be 0 - Must have a valid name - Can only be a source type, not sink or intermediate one - Name may include dots (e.g. to represent .bss, .data, .rodata etc) - Cannot be a member of a struct/union - Inner btf_var_secinfo array with {type,offset,size} triple must be sorted by offset in ascending order - Type must always point to BTF Var - BTF resolved size of Var must be <= size provided by triple - DataSec size must be >= sum of triple sizes (thus holes are allowed) btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve() are on a high level quite similar but each come with slight, subtle differences. They could potentially be a bit refactored in future which hasn't been done here to ease review. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-10 05:20:09 +08:00
return t &&
!btf_type_is_modifier(t) &&
!btf_type_is_var(t) &&
!btf_type_is_datasec(t);
}
if (btf_type_is_array(t)) {
const struct btf_array *array = btf_type_array(t);
const struct btf_type *elem_type;
u32 elem_type_id = array->type;
u32 elem_size;
elem_type = btf_type_id_size(btf, &elem_type_id, &elem_size);
return elem_type && !btf_type_is_modifier(elem_type) &&
(array->nelems * elem_size ==
btf->resolved_sizes[type_id]);
}
return false;
}
static int btf_resolve(struct btf_verifier_env *env,
const struct btf_type *t, u32 type_id)
{
u32 save_log_type_id = env->log_type_id;
const struct resolve_vertex *v;
int err = 0;
env->resolve_mode = RESOLVE_TBD;
env_stack_push(env, t, type_id);
while (!err && (v = env_stack_peak(env))) {
env->log_type_id = v->type_id;
err = btf_type_ops(v->t)->resolve(env, v);
}
env->log_type_id = type_id;
if (err == -E2BIG) {
btf_verifier_log_type(env, t,
"Exceeded max resolving depth:%u",
MAX_RESOLVE_DEPTH);
} else if (err == -EEXIST) {
btf_verifier_log_type(env, t, "Loop detected");
}
/* Final sanity check */
if (!err && !btf_resolve_valid(env, t, type_id)) {
btf_verifier_log_type(env, t, "Invalid resolve state");
err = -EINVAL;
}
env->log_type_id = save_log_type_id;
return err;
}
static int btf_check_all_types(struct btf_verifier_env *env)
{
struct btf *btf = env->btf;
u32 type_id;
int err;
err = env_resolve_init(env);
if (err)
return err;
env->phase++;
for (type_id = 1; type_id <= btf->nr_types; type_id++) {
const struct btf_type *t = btf_type_by_id(btf, type_id);
env->log_type_id = type_id;
if (btf_type_needs_resolve(t) &&
!env_type_is_resolved(env, type_id)) {
err = btf_resolve(env, t, type_id);
if (err)
return err;
}
if (btf_type_is_func_proto(t)) {
err = btf_func_proto_check(env, t);
if (err)
return err;
}
if (btf_type_is_func(t)) {
err = btf_func_check(env, t);
if (err)
return err;
}
}
return 0;
}
static int btf_parse_type_sec(struct btf_verifier_env *env)
{
const struct btf_header *hdr = &env->btf->hdr;
int err;
/* Type section must align to 4 bytes */
if (hdr->type_off & (sizeof(u32) - 1)) {
btf_verifier_log(env, "Unaligned type_off");
return -EINVAL;
}
if (!hdr->type_len) {
btf_verifier_log(env, "No type found");
return -EINVAL;
}
err = btf_check_all_metas(env);
if (err)
return err;
return btf_check_all_types(env);
}
static int btf_parse_str_sec(struct btf_verifier_env *env)
{
const struct btf_header *hdr;
struct btf *btf = env->btf;
const char *start, *end;
hdr = &btf->hdr;
start = btf->nohdr_data + hdr->str_off;
end = start + hdr->str_len;
if (end != btf->data + btf->data_size) {
btf_verifier_log(env, "String section is not at the end");
return -EINVAL;
}
if (!hdr->str_len || hdr->str_len - 1 > BTF_MAX_NAME_OFFSET ||
start[0] || end[-1]) {
btf_verifier_log(env, "Invalid string section");
return -EINVAL;
}
btf->strings = start;
return 0;
}
static const size_t btf_sec_info_offset[] = {
offsetof(struct btf_header, type_off),
offsetof(struct btf_header, str_off),
};
static int btf_sec_info_cmp(const void *a, const void *b)
{
const struct btf_sec_info *x = a;
const struct btf_sec_info *y = b;
return (int)(x->off - y->off) ? : (int)(x->len - y->len);
}
static int btf_check_sec_info(struct btf_verifier_env *env,
u32 btf_data_size)
{
struct btf_sec_info secs[ARRAY_SIZE(btf_sec_info_offset)];
u32 total, expected_total, i;
const struct btf_header *hdr;
const struct btf *btf;
btf = env->btf;
hdr = &btf->hdr;
/* Populate the secs from hdr */
for (i = 0; i < ARRAY_SIZE(btf_sec_info_offset); i++)
secs[i] = *(struct btf_sec_info *)((void *)hdr +
btf_sec_info_offset[i]);
sort(secs, ARRAY_SIZE(btf_sec_info_offset),
sizeof(struct btf_sec_info), btf_sec_info_cmp, NULL);
/* Check for gaps and overlap among sections */
total = 0;
expected_total = btf_data_size - hdr->hdr_len;
for (i = 0; i < ARRAY_SIZE(btf_sec_info_offset); i++) {
if (expected_total < secs[i].off) {
btf_verifier_log(env, "Invalid section offset");
return -EINVAL;
}
if (total < secs[i].off) {
/* gap */
btf_verifier_log(env, "Unsupported section found");
return -EINVAL;
}
if (total > secs[i].off) {
btf_verifier_log(env, "Section overlap found");
return -EINVAL;
}
if (expected_total - total < secs[i].len) {
btf_verifier_log(env,
"Total section length too long");
return -EINVAL;
}
total += secs[i].len;
}
/* There is data other than hdr and known sections */
if (expected_total != total) {
btf_verifier_log(env, "Unsupported section found");
return -EINVAL;
}
return 0;
}
static int btf_parse_hdr(struct btf_verifier_env *env)
{
u32 hdr_len, hdr_copy, btf_data_size;
const struct btf_header *hdr;
struct btf *btf;
int err;
btf = env->btf;
btf_data_size = btf->data_size;
if (btf_data_size <
offsetof(struct btf_header, hdr_len) + sizeof(hdr->hdr_len)) {
btf_verifier_log(env, "hdr_len not found");
return -EINVAL;
}
hdr = btf->data;
hdr_len = hdr->hdr_len;
if (btf_data_size < hdr_len) {
btf_verifier_log(env, "btf_header not found");
return -EINVAL;
}
/* Ensure the unsupported header fields are zero */
if (hdr_len > sizeof(btf->hdr)) {
u8 *expected_zero = btf->data + sizeof(btf->hdr);
u8 *end = btf->data + hdr_len;
for (; expected_zero < end; expected_zero++) {
if (*expected_zero) {
btf_verifier_log(env, "Unsupported btf_header");
return -E2BIG;
}
}
}
hdr_copy = min_t(u32, hdr_len, sizeof(btf->hdr));
memcpy(&btf->hdr, btf->data, hdr_copy);
hdr = &btf->hdr;
btf_verifier_log_hdr(env, btf_data_size);
if (hdr->magic != BTF_MAGIC) {
btf_verifier_log(env, "Invalid magic");
return -EINVAL;
}
if (hdr->version != BTF_VERSION) {
btf_verifier_log(env, "Unsupported version");
return -ENOTSUPP;
}
if (hdr->flags) {
btf_verifier_log(env, "Unsupported flags");
return -ENOTSUPP;
}
if (btf_data_size == hdr->hdr_len) {
btf_verifier_log(env, "No data");
return -EINVAL;
}
err = btf_check_sec_info(env, btf_data_size);
if (err)
return err;
return 0;
}
static struct btf *btf_parse(void __user *btf_data, u32 btf_data_size,
u32 log_level, char __user *log_ubuf, u32 log_size)
{
struct btf_verifier_env *env = NULL;
struct bpf_verifier_log *log;
struct btf *btf = NULL;
u8 *data;
int err;
if (btf_data_size > BTF_MAX_SIZE)
return ERR_PTR(-E2BIG);
env = kzalloc(sizeof(*env), GFP_KERNEL | __GFP_NOWARN);
if (!env)
return ERR_PTR(-ENOMEM);
log = &env->log;
if (log_level || log_ubuf || log_size) {
/* user requested verbose verifier output
* and supplied buffer to store the verification trace
*/
log->level = log_level;
log->ubuf = log_ubuf;
log->len_total = log_size;
/* log attributes have to be sane */
if (log->len_total < 128 || log->len_total > UINT_MAX >> 8 ||
!log->level || !log->ubuf) {
err = -EINVAL;
goto errout;
}
}
btf = kzalloc(sizeof(*btf), GFP_KERNEL | __GFP_NOWARN);
if (!btf) {
err = -ENOMEM;
goto errout;
}
env->btf = btf;
data = kvmalloc(btf_data_size, GFP_KERNEL | __GFP_NOWARN);
if (!data) {
err = -ENOMEM;
goto errout;
}
btf->data = data;
btf->data_size = btf_data_size;
if (copy_from_user(data, btf_data, btf_data_size)) {
err = -EFAULT;
goto errout;
}
err = btf_parse_hdr(env);
if (err)
goto errout;
btf->nohdr_data = btf->data + btf->hdr.hdr_len;
err = btf_parse_str_sec(env);
if (err)
goto errout;
err = btf_parse_type_sec(env);
if (err)
goto errout;
if (log->level && bpf_verifier_log_full(log)) {
err = -ENOSPC;
goto errout;
}
btf_verifier_env_free(env);
refcount_set(&btf->refcnt, 1);
return btf;
errout:
btf_verifier_env_free(env);
if (btf)
btf_free(btf);
return ERR_PTR(err);
}
extern char __weak _binary__btf_vmlinux_bin_start[];
extern char __weak _binary__btf_vmlinux_bin_end[];
extern struct btf *btf_vmlinux;
#define BPF_MAP_TYPE(_id, _ops)
static union {
struct bpf_ctx_convert {
#define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type) \
prog_ctx_type _id##_prog; \
kern_ctx_type _id##_kern;
#include <linux/bpf_types.h>
#undef BPF_PROG_TYPE
} *__t;
/* 't' is written once under lock. Read many times. */
const struct btf_type *t;
} bpf_ctx_convert;
enum {
#define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type) \
__ctx_convert##_id,
#include <linux/bpf_types.h>
#undef BPF_PROG_TYPE
};
static u8 bpf_ctx_convert_map[] = {
#define BPF_PROG_TYPE(_id, _name, prog_ctx_type, kern_ctx_type) \
[_id] = __ctx_convert##_id,
#include <linux/bpf_types.h>
#undef BPF_PROG_TYPE
};
#undef BPF_MAP_TYPE
static const struct btf_member *
btf_get_prog_ctx_type(struct bpf_verifier_log *log, struct btf *btf,
const struct btf_type *t, enum bpf_prog_type prog_type)
{
const struct btf_type *conv_struct;
const struct btf_type *ctx_struct;
const struct btf_member *ctx_type;
const char *tname, *ctx_tname;
conv_struct = bpf_ctx_convert.t;
if (!conv_struct) {
bpf_log(log, "btf_vmlinux is malformed\n");
return NULL;
}
t = btf_type_by_id(btf, t->type);
while (btf_type_is_modifier(t))
t = btf_type_by_id(btf, t->type);
if (!btf_type_is_struct(t)) {
/* Only pointer to struct is supported for now.
* That means that BPF_PROG_TYPE_TRACEPOINT with BTF
* is not supported yet.
* BPF_PROG_TYPE_RAW_TRACEPOINT is fine.
*/
bpf_log(log, "BPF program ctx type is not a struct\n");
return NULL;
}
tname = btf_name_by_offset(btf, t->name_off);
if (!tname) {
bpf_log(log, "BPF program ctx struct doesn't have a name\n");
return NULL;
}
/* prog_type is valid bpf program type. No need for bounds check. */
ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2;
/* ctx_struct is a pointer to prog_ctx_type in vmlinux.
* Like 'struct __sk_buff'
*/
ctx_struct = btf_type_by_id(btf_vmlinux, ctx_type->type);
if (!ctx_struct)
/* should not happen */
return NULL;
ctx_tname = btf_name_by_offset(btf_vmlinux, ctx_struct->name_off);
if (!ctx_tname) {
/* should not happen */
bpf_log(log, "Please fix kernel include/linux/bpf_types.h\n");
return NULL;
}
/* only compare that prog's ctx type name is the same as
* kernel expects. No need to compare field by field.
* It's ok for bpf prog to do:
* struct __sk_buff {};
* int socket_filter_bpf_prog(struct __sk_buff *skb)
* { // no fields of skb are ever used }
*/
if (strcmp(ctx_tname, tname))
return NULL;
return ctx_type;
}
struct btf *btf_parse_vmlinux(void)
{
struct btf_verifier_env *env = NULL;
struct bpf_verifier_log *log;
struct btf *btf = NULL;
int err, i;
env = kzalloc(sizeof(*env), GFP_KERNEL | __GFP_NOWARN);
if (!env)
return ERR_PTR(-ENOMEM);
log = &env->log;
log->level = BPF_LOG_KERNEL;
btf = kzalloc(sizeof(*btf), GFP_KERNEL | __GFP_NOWARN);
if (!btf) {
err = -ENOMEM;
goto errout;
}
env->btf = btf;
btf->data = _binary__btf_vmlinux_bin_start;
btf->data_size = _binary__btf_vmlinux_bin_end -
_binary__btf_vmlinux_bin_start;
err = btf_parse_hdr(env);
if (err)
goto errout;
btf->nohdr_data = btf->data + btf->hdr.hdr_len;
err = btf_parse_str_sec(env);
if (err)
goto errout;
err = btf_check_all_metas(env);
if (err)
goto errout;
/* find struct bpf_ctx_convert for type checking later */
for (i = 1; i <= btf->nr_types; i++) {
const struct btf_type *t;
const char *tname;
t = btf_type_by_id(btf, i);
if (!__btf_type_is_struct(t))
continue;
tname = __btf_name_by_offset(btf, t->name_off);
if (!strcmp(tname, "bpf_ctx_convert")) {
/* btf_parse_vmlinux() runs under bpf_verifier_lock */
bpf_ctx_convert.t = t;
break;
}
}
if (i > btf->nr_types) {
err = -ENOENT;
goto errout;
}
btf_verifier_env_free(env);
refcount_set(&btf->refcnt, 1);
return btf;
errout:
btf_verifier_env_free(env);
if (btf) {
kvfree(btf->types);
kfree(btf);
}
return ERR_PTR(err);
}
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
bool btf_ctx_access(int off, int size, enum bpf_access_type type,
const struct bpf_prog *prog,
struct bpf_insn_access_aux *info)
{
const struct btf_type *t = prog->aux->attach_func_proto;
const char *tname = prog->aux->attach_func_name;
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
struct bpf_verifier_log *log = info->log;
const struct btf_param *args;
u32 nr_args, arg;
if (off % 8) {
bpf_log(log, "func '%s' offset %d is not multiple of 8\n",
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
tname, off);
return false;
}
arg = off / 8;
args = (const struct btf_param *)(t + 1);
nr_args = btf_type_vlen(t);
if (prog->aux->attach_btf_trace) {
/* skip first 'void *__data' argument in btf_trace_##name typedef */
args++;
nr_args--;
}
bpf: Introduce BPF trampoline Introduce BPF trampoline concept to allow kernel code to call into BPF programs with practically zero overhead. The trampoline generation logic is architecture dependent. It's converting native calling convention into BPF calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The registers R1 to R5 are used to pass arguments into BPF functions. The main BPF program accepts only single argument "ctx" in R1. Whereas CPU native calling convention is different. x86-64 is passing first 6 arguments in registers and the rest on the stack. x86-32 is passing first 3 arguments in registers. sparc64 is passing first 6 in registers. And so on. The trampolines between BPF and kernel already exist. BPF_CALL_x macros in include/linux/filter.h statically compile trampolines from BPF into kernel helpers. They convert up to five u64 arguments into kernel C pointers and integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On 32-bit architecture they're meaningful. The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and __bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert kernel function arguments into array of u64s that BPF program consumes via R1=ctx pointer. This patch set is doing the same job as __bpf_trace_##call() static trampolines, but dynamically for any kernel function. There are ~22k global kernel functions that are attachable via nop at function entry. The function arguments and types are described in BTF. The job of btf_distill_func_proto() function is to extract useful information from BTF into "function model" that architecture dependent trampoline generators will use to generate assembly code to cast kernel function arguments into array of u64s. For example the kernel function eth_type_trans has two pointers. They will be casted to u64 and stored into stack of generated trampoline. The pointer to that stack space will be passed into BPF program in R1. On x86-64 such generated trampoline will consume 16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will make sure that only two u64 are accessed read-only by BPF program. The verifier will also recognize the precise type of the pointers being accessed and will not allow typecasting of the pointer to a different type within BPF program. The tracing use case in the datacenter demonstrated that certain key kernel functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always active. Other functions have both kprobe and kretprobe. So it is essential to keep both kernel code and BPF programs executing at maximum speed. Hence generated BPF trampoline is re-generated every time new program is attached or detached to maintain maximum performance. To avoid the high cost of retpoline the attached BPF programs are called directly. __bpf_prog_enter/exit() are used to support per-program execution stats. In the future this logic will be optimized further by adding support for bpf_stats_enabled_key inside generated assembly code. Introduction of preemptible and sleepable BPF programs will completely remove the need to call to __bpf_prog_enter/exit(). Detach of a BPF program from the trampoline should not fail. To avoid memory allocation in detach path the half of the page is used as a reserve and flipped after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly which is enough for BPF tracing use cases. This limit can be increased in the future. BPF_TRACE_FENTRY programs have access to raw kernel function arguments while BPF_TRACE_FEXIT programs have access to kernel return value as well. Often kprobe BPF program remembers function arguments in a map while kretprobe fetches arguments from a map and analyzes them together with return value. BPF_TRACE_FEXIT accelerates this typical use case. Recursion prevention for kprobe BPF programs is done via per-cpu bpf_prog_active counter. In practice that turned out to be a mistake. It caused programs to randomly skip execution. The tracing tools missed results they were looking for. Hence BPF trampoline doesn't provide builtin recursion prevention. It's a job of BPF program itself and will be addressed in the follow up patches. BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases in the future. For example to remove retpoline cost from XDP programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org
2019-11-15 02:57:04 +08:00
if (prog->expected_attach_type == BPF_TRACE_FEXIT &&
arg == nr_args) {
/* function return type */
t = btf_type_by_id(btf_vmlinux, t->type);
} else if (arg >= nr_args) {
bpf_log(log, "func '%s' doesn't have %d-th argument\n",
bpf: Introduce BPF trampoline Introduce BPF trampoline concept to allow kernel code to call into BPF programs with practically zero overhead. The trampoline generation logic is architecture dependent. It's converting native calling convention into BPF calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The registers R1 to R5 are used to pass arguments into BPF functions. The main BPF program accepts only single argument "ctx" in R1. Whereas CPU native calling convention is different. x86-64 is passing first 6 arguments in registers and the rest on the stack. x86-32 is passing first 3 arguments in registers. sparc64 is passing first 6 in registers. And so on. The trampolines between BPF and kernel already exist. BPF_CALL_x macros in include/linux/filter.h statically compile trampolines from BPF into kernel helpers. They convert up to five u64 arguments into kernel C pointers and integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On 32-bit architecture they're meaningful. The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and __bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert kernel function arguments into array of u64s that BPF program consumes via R1=ctx pointer. This patch set is doing the same job as __bpf_trace_##call() static trampolines, but dynamically for any kernel function. There are ~22k global kernel functions that are attachable via nop at function entry. The function arguments and types are described in BTF. The job of btf_distill_func_proto() function is to extract useful information from BTF into "function model" that architecture dependent trampoline generators will use to generate assembly code to cast kernel function arguments into array of u64s. For example the kernel function eth_type_trans has two pointers. They will be casted to u64 and stored into stack of generated trampoline. The pointer to that stack space will be passed into BPF program in R1. On x86-64 such generated trampoline will consume 16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will make sure that only two u64 are accessed read-only by BPF program. The verifier will also recognize the precise type of the pointers being accessed and will not allow typecasting of the pointer to a different type within BPF program. The tracing use case in the datacenter demonstrated that certain key kernel functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always active. Other functions have both kprobe and kretprobe. So it is essential to keep both kernel code and BPF programs executing at maximum speed. Hence generated BPF trampoline is re-generated every time new program is attached or detached to maintain maximum performance. To avoid the high cost of retpoline the attached BPF programs are called directly. __bpf_prog_enter/exit() are used to support per-program execution stats. In the future this logic will be optimized further by adding support for bpf_stats_enabled_key inside generated assembly code. Introduction of preemptible and sleepable BPF programs will completely remove the need to call to __bpf_prog_enter/exit(). Detach of a BPF program from the trampoline should not fail. To avoid memory allocation in detach path the half of the page is used as a reserve and flipped after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly which is enough for BPF tracing use cases. This limit can be increased in the future. BPF_TRACE_FENTRY programs have access to raw kernel function arguments while BPF_TRACE_FEXIT programs have access to kernel return value as well. Often kprobe BPF program remembers function arguments in a map while kretprobe fetches arguments from a map and analyzes them together with return value. BPF_TRACE_FEXIT accelerates this typical use case. Recursion prevention for kprobe BPF programs is done via per-cpu bpf_prog_active counter. In practice that turned out to be a mistake. It caused programs to randomly skip execution. The tracing tools missed results they were looking for. Hence BPF trampoline doesn't provide builtin recursion prevention. It's a job of BPF program itself and will be addressed in the follow up patches. BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases in the future. For example to remove retpoline cost from XDP programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org
2019-11-15 02:57:04 +08:00
tname, arg + 1);
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
return false;
bpf: Introduce BPF trampoline Introduce BPF trampoline concept to allow kernel code to call into BPF programs with practically zero overhead. The trampoline generation logic is architecture dependent. It's converting native calling convention into BPF calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The registers R1 to R5 are used to pass arguments into BPF functions. The main BPF program accepts only single argument "ctx" in R1. Whereas CPU native calling convention is different. x86-64 is passing first 6 arguments in registers and the rest on the stack. x86-32 is passing first 3 arguments in registers. sparc64 is passing first 6 in registers. And so on. The trampolines between BPF and kernel already exist. BPF_CALL_x macros in include/linux/filter.h statically compile trampolines from BPF into kernel helpers. They convert up to five u64 arguments into kernel C pointers and integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On 32-bit architecture they're meaningful. The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and __bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert kernel function arguments into array of u64s that BPF program consumes via R1=ctx pointer. This patch set is doing the same job as __bpf_trace_##call() static trampolines, but dynamically for any kernel function. There are ~22k global kernel functions that are attachable via nop at function entry. The function arguments and types are described in BTF. The job of btf_distill_func_proto() function is to extract useful information from BTF into "function model" that architecture dependent trampoline generators will use to generate assembly code to cast kernel function arguments into array of u64s. For example the kernel function eth_type_trans has two pointers. They will be casted to u64 and stored into stack of generated trampoline. The pointer to that stack space will be passed into BPF program in R1. On x86-64 such generated trampoline will consume 16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will make sure that only two u64 are accessed read-only by BPF program. The verifier will also recognize the precise type of the pointers being accessed and will not allow typecasting of the pointer to a different type within BPF program. The tracing use case in the datacenter demonstrated that certain key kernel functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always active. Other functions have both kprobe and kretprobe. So it is essential to keep both kernel code and BPF programs executing at maximum speed. Hence generated BPF trampoline is re-generated every time new program is attached or detached to maintain maximum performance. To avoid the high cost of retpoline the attached BPF programs are called directly. __bpf_prog_enter/exit() are used to support per-program execution stats. In the future this logic will be optimized further by adding support for bpf_stats_enabled_key inside generated assembly code. Introduction of preemptible and sleepable BPF programs will completely remove the need to call to __bpf_prog_enter/exit(). Detach of a BPF program from the trampoline should not fail. To avoid memory allocation in detach path the half of the page is used as a reserve and flipped after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly which is enough for BPF tracing use cases. This limit can be increased in the future. BPF_TRACE_FENTRY programs have access to raw kernel function arguments while BPF_TRACE_FEXIT programs have access to kernel return value as well. Often kprobe BPF program remembers function arguments in a map while kretprobe fetches arguments from a map and analyzes them together with return value. BPF_TRACE_FEXIT accelerates this typical use case. Recursion prevention for kprobe BPF programs is done via per-cpu bpf_prog_active counter. In practice that turned out to be a mistake. It caused programs to randomly skip execution. The tracing tools missed results they were looking for. Hence BPF trampoline doesn't provide builtin recursion prevention. It's a job of BPF program itself and will be addressed in the follow up patches. BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases in the future. For example to remove retpoline cost from XDP programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org
2019-11-15 02:57:04 +08:00
} else {
t = btf_type_by_id(btf_vmlinux, args[arg].type);
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
}
/* skip modifiers */
while (btf_type_is_modifier(t))
t = btf_type_by_id(btf_vmlinux, t->type);
if (btf_type_is_int(t))
/* accessing a scalar */
return true;
if (!btf_type_is_ptr(t)) {
bpf_log(log,
"func '%s' arg%d '%s' has type %s. Only pointer access is allowed\n",
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
tname, arg,
__btf_name_by_offset(btf_vmlinux, t->name_off),
btf_kind_str[BTF_INFO_KIND(t->info)]);
return false;
}
if (t->type == 0)
/* This is a pointer to void.
* It is the same as scalar from the verifier safety pov.
* No further pointer walking is allowed.
*/
return true;
/* this is a pointer to another type */
info->reg_type = PTR_TO_BTF_ID;
info->btf_id = t->type;
t = btf_type_by_id(btf_vmlinux, t->type);
/* skip modifiers */
while (btf_type_is_modifier(t))
t = btf_type_by_id(btf_vmlinux, t->type);
if (!btf_type_is_struct(t)) {
bpf_log(log,
"func '%s' arg%d type %s is not a struct\n",
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
tname, arg, btf_kind_str[BTF_INFO_KIND(t->info)]);
return false;
}
bpf_log(log, "func '%s' arg%d has btf_id %d type %s '%s'\n",
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
tname, arg, info->btf_id, btf_kind_str[BTF_INFO_KIND(t->info)],
__btf_name_by_offset(btf_vmlinux, t->name_off));
return true;
}
int btf_struct_access(struct bpf_verifier_log *log,
const struct btf_type *t, int off, int size,
enum bpf_access_type atype,
u32 *next_btf_id)
{
u32 i, moff, mtrue_end, msize = 0, total_nelems = 0;
const struct btf_type *mtype, *elem_type = NULL;
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
const struct btf_member *member;
const char *tname, *mname;
again:
tname = __btf_name_by_offset(btf_vmlinux, t->name_off);
if (!btf_type_is_struct(t)) {
bpf_log(log, "Type '%s' is not a struct", tname);
return -EINVAL;
}
for_each_member(i, t, member) {
if (btf_member_bitfield_size(t, member))
/* bitfields are not supported yet */
continue;
/* offset of the field in bytes */
moff = btf_member_bit_offset(t, member) / 8;
if (off + size <= moff)
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
/* won't find anything, field is already too far */
break;
/* In case of "off" is pointing to holes of a struct */
if (off < moff)
continue;
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
/* type of the field */
mtype = btf_type_by_id(btf_vmlinux, member->type);
mname = __btf_name_by_offset(btf_vmlinux, member->name_off);
mtype = btf_resolve_size(btf_vmlinux, mtype, &msize,
&elem_type, &total_nelems);
if (IS_ERR(mtype)) {
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
bpf_log(log, "field %s doesn't have size\n", mname);
return -EFAULT;
}
mtrue_end = moff + msize;
if (off >= mtrue_end)
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
/* no overlap with member, keep iterating */
continue;
if (btf_type_is_array(mtype)) {
u32 elem_idx;
/* btf_resolve_size() above helps to
* linearize a multi-dimensional array.
*
* The logic here is treating an array
* in a struct as the following way:
*
* struct outer {
* struct inner array[2][2];
* };
*
* looks like:
*
* struct outer {
* struct inner array_elem0;
* struct inner array_elem1;
* struct inner array_elem2;
* struct inner array_elem3;
* };
*
* When accessing outer->array[1][0], it moves
* moff to "array_elem2", set mtype to
* "struct inner", and msize also becomes
* sizeof(struct inner). Then most of the
* remaining logic will fall through without
* caring the current member is an array or
* not.
*
* Unlike mtype/msize/moff, mtrue_end does not
* change. The naming difference ("_true") tells
* that it is not always corresponding to
* the current mtype/msize/moff.
* It is the true end of the current
* member (i.e. array in this case). That
* will allow an int array to be accessed like
* a scratch space,
* i.e. allow access beyond the size of
* the array's element as long as it is
* within the mtrue_end boundary.
*/
/* skip empty array */
if (moff == mtrue_end)
continue;
msize /= total_nelems;
elem_idx = (off - moff) / msize;
moff += elem_idx * msize;
mtype = elem_type;
}
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
/* the 'off' we're looking for is either equal to start
* of this field or inside of this struct
*/
if (btf_type_is_struct(mtype)) {
/* our field must be inside that union or struct */
t = mtype;
/* adjust offset we're looking for */
off -= moff;
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
goto again;
}
if (btf_type_is_ptr(mtype)) {
const struct btf_type *stype;
if (msize != size || off != moff) {
bpf_log(log,
"cannot access ptr member %s with moff %u in struct %s with off %u size %u\n",
mname, moff, tname, off, size);
return -EACCES;
}
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
stype = btf_type_by_id(btf_vmlinux, mtype->type);
/* skip modifiers */
while (btf_type_is_modifier(stype))
stype = btf_type_by_id(btf_vmlinux, stype->type);
if (btf_type_is_struct(stype)) {
*next_btf_id = mtype->type;
return PTR_TO_BTF_ID;
}
}
/* Allow more flexible access within an int as long as
* it is within mtrue_end.
* Since mtrue_end could be the end of an array,
* that also allows using an array of int as a scratch
* space. e.g. skb->cb[].
*/
if (off + size > mtrue_end) {
bpf_log(log,
"access beyond the end of member %s (mend:%u) in struct %s with off %u size %u\n",
mname, mtrue_end, tname, off, size);
return -EACCES;
}
bpf: Implement accurate raw_tp context access via BTF libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org
2019-10-16 11:25:00 +08:00
return SCALAR_VALUE;
}
bpf_log(log, "struct %s doesn't have field at offset %d\n", tname, off);
return -EINVAL;
}
static int __btf_resolve_helper_id(struct bpf_verifier_log *log, void *fn,
int arg)
{
char fnname[KSYM_SYMBOL_LEN + 4] = "btf_";
const struct btf_param *args;
const struct btf_type *t;
const char *tname, *sym;
u32 btf_id, i;
if (IS_ERR(btf_vmlinux)) {
bpf_log(log, "btf_vmlinux is malformed\n");
return -EINVAL;
}
sym = kallsyms_lookup((long)fn, NULL, NULL, NULL, fnname + 4);
if (!sym) {
bpf_log(log, "kernel doesn't have kallsyms\n");
return -EFAULT;
}
for (i = 1; i <= btf_vmlinux->nr_types; i++) {
t = btf_type_by_id(btf_vmlinux, i);
if (BTF_INFO_KIND(t->info) != BTF_KIND_TYPEDEF)
continue;
tname = __btf_name_by_offset(btf_vmlinux, t->name_off);
if (!strcmp(tname, fnname))
break;
}
if (i > btf_vmlinux->nr_types) {
bpf_log(log, "helper %s type is not found\n", fnname);
return -ENOENT;
}
t = btf_type_by_id(btf_vmlinux, t->type);
if (!btf_type_is_ptr(t))
return -EFAULT;
t = btf_type_by_id(btf_vmlinux, t->type);
if (!btf_type_is_func_proto(t))
return -EFAULT;
args = (const struct btf_param *)(t + 1);
if (arg >= btf_type_vlen(t)) {
bpf_log(log, "bpf helper %s doesn't have %d-th argument\n",
fnname, arg);
return -EINVAL;
}
t = btf_type_by_id(btf_vmlinux, args[arg].type);
if (!btf_type_is_ptr(t) || !t->type) {
/* anything but the pointer to struct is a helper config bug */
bpf_log(log, "ARG_PTR_TO_BTF is misconfigured\n");
return -EFAULT;
}
btf_id = t->type;
t = btf_type_by_id(btf_vmlinux, t->type);
/* skip modifiers */
while (btf_type_is_modifier(t)) {
btf_id = t->type;
t = btf_type_by_id(btf_vmlinux, t->type);
}
if (!btf_type_is_struct(t)) {
bpf_log(log, "ARG_PTR_TO_BTF is not a struct\n");
return -EFAULT;
}
bpf_log(log, "helper %s arg%d has btf_id %d struct %s\n", fnname + 4,
arg, btf_id, __btf_name_by_offset(btf_vmlinux, t->name_off));
return btf_id;
}
int btf_resolve_helper_id(struct bpf_verifier_log *log,
const struct bpf_func_proto *fn, int arg)
{
int *btf_id = &fn->btf_id[arg];
int ret;
if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID)
return -EINVAL;
ret = READ_ONCE(*btf_id);
if (ret)
return ret;
/* ok to race the search. The result is the same */
ret = __btf_resolve_helper_id(log, fn->func, arg);
if (!ret) {
/* Function argument cannot be type 'void' */
bpf_log(log, "BTF resolution bug\n");
return -EFAULT;
}
WRITE_ONCE(*btf_id, ret);
return ret;
}
bpf: Introduce BPF trampoline Introduce BPF trampoline concept to allow kernel code to call into BPF programs with practically zero overhead. The trampoline generation logic is architecture dependent. It's converting native calling convention into BPF calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The registers R1 to R5 are used to pass arguments into BPF functions. The main BPF program accepts only single argument "ctx" in R1. Whereas CPU native calling convention is different. x86-64 is passing first 6 arguments in registers and the rest on the stack. x86-32 is passing first 3 arguments in registers. sparc64 is passing first 6 in registers. And so on. The trampolines between BPF and kernel already exist. BPF_CALL_x macros in include/linux/filter.h statically compile trampolines from BPF into kernel helpers. They convert up to five u64 arguments into kernel C pointers and integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On 32-bit architecture they're meaningful. The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and __bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert kernel function arguments into array of u64s that BPF program consumes via R1=ctx pointer. This patch set is doing the same job as __bpf_trace_##call() static trampolines, but dynamically for any kernel function. There are ~22k global kernel functions that are attachable via nop at function entry. The function arguments and types are described in BTF. The job of btf_distill_func_proto() function is to extract useful information from BTF into "function model" that architecture dependent trampoline generators will use to generate assembly code to cast kernel function arguments into array of u64s. For example the kernel function eth_type_trans has two pointers. They will be casted to u64 and stored into stack of generated trampoline. The pointer to that stack space will be passed into BPF program in R1. On x86-64 such generated trampoline will consume 16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will make sure that only two u64 are accessed read-only by BPF program. The verifier will also recognize the precise type of the pointers being accessed and will not allow typecasting of the pointer to a different type within BPF program. The tracing use case in the datacenter demonstrated that certain key kernel functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always active. Other functions have both kprobe and kretprobe. So it is essential to keep both kernel code and BPF programs executing at maximum speed. Hence generated BPF trampoline is re-generated every time new program is attached or detached to maintain maximum performance. To avoid the high cost of retpoline the attached BPF programs are called directly. __bpf_prog_enter/exit() are used to support per-program execution stats. In the future this logic will be optimized further by adding support for bpf_stats_enabled_key inside generated assembly code. Introduction of preemptible and sleepable BPF programs will completely remove the need to call to __bpf_prog_enter/exit(). Detach of a BPF program from the trampoline should not fail. To avoid memory allocation in detach path the half of the page is used as a reserve and flipped after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly which is enough for BPF tracing use cases. This limit can be increased in the future. BPF_TRACE_FENTRY programs have access to raw kernel function arguments while BPF_TRACE_FEXIT programs have access to kernel return value as well. Often kprobe BPF program remembers function arguments in a map while kretprobe fetches arguments from a map and analyzes them together with return value. BPF_TRACE_FEXIT accelerates this typical use case. Recursion prevention for kprobe BPF programs is done via per-cpu bpf_prog_active counter. In practice that turned out to be a mistake. It caused programs to randomly skip execution. The tracing tools missed results they were looking for. Hence BPF trampoline doesn't provide builtin recursion prevention. It's a job of BPF program itself and will be addressed in the follow up patches. BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases in the future. For example to remove retpoline cost from XDP programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org
2019-11-15 02:57:04 +08:00
static int __get_type_size(struct btf *btf, u32 btf_id,
const struct btf_type **bad_type)
{
const struct btf_type *t;
if (!btf_id)
/* void */
return 0;
t = btf_type_by_id(btf, btf_id);
while (t && btf_type_is_modifier(t))
t = btf_type_by_id(btf, t->type);
if (!t)
return -EINVAL;
if (btf_type_is_ptr(t))
/* kernel size of pointer. Not BPF's size of pointer*/
return sizeof(void *);
if (btf_type_is_int(t) || btf_type_is_enum(t))
return t->size;
*bad_type = t;
return -EINVAL;
}
int btf_distill_func_proto(struct bpf_verifier_log *log,
struct btf *btf,
const struct btf_type *func,
const char *tname,
struct btf_func_model *m)
{
const struct btf_param *args;
const struct btf_type *t;
u32 i, nargs;
int ret;
args = (const struct btf_param *)(func + 1);
nargs = btf_type_vlen(func);
if (nargs >= MAX_BPF_FUNC_ARGS) {
bpf_log(log,
"The function %s has %d arguments. Too many.\n",
tname, nargs);
return -EINVAL;
}
ret = __get_type_size(btf, func->type, &t);
if (ret < 0) {
bpf_log(log,
"The function %s return type %s is unsupported.\n",
tname, btf_kind_str[BTF_INFO_KIND(t->info)]);
return -EINVAL;
}
m->ret_size = ret;
for (i = 0; i < nargs; i++) {
ret = __get_type_size(btf, args[i].type, &t);
if (ret < 0) {
bpf_log(log,
"The function %s arg%d type %s is unsupported.\n",
tname, i, btf_kind_str[BTF_INFO_KIND(t->info)]);
return -EINVAL;
}
m->arg_size[i] = ret;
}
m->nr_args = nargs;
return 0;
}
void btf_type_seq_show(const struct btf *btf, u32 type_id, void *obj,
struct seq_file *m)
{
const struct btf_type *t = btf_type_by_id(btf, type_id);
btf_type_ops(t)->seq_show(btf, t, type_id, obj, 0, m);
}
#ifdef CONFIG_PROC_FS
static void bpf_btf_show_fdinfo(struct seq_file *m, struct file *filp)
{
const struct btf *btf = filp->private_data;
seq_printf(m, "btf_id:\t%u\n", btf->id);
}
#endif
static int btf_release(struct inode *inode, struct file *filp)
{
btf_put(filp->private_data);
return 0;
}
const struct file_operations btf_fops = {
#ifdef CONFIG_PROC_FS
.show_fdinfo = bpf_btf_show_fdinfo,
#endif
.release = btf_release,
};
static int __btf_new_fd(struct btf *btf)
{
return anon_inode_getfd("btf", &btf_fops, btf, O_RDONLY | O_CLOEXEC);
}
int btf_new_fd(const union bpf_attr *attr)
{
struct btf *btf;
int ret;
btf = btf_parse(u64_to_user_ptr(attr->btf),
attr->btf_size, attr->btf_log_level,
u64_to_user_ptr(attr->btf_log_buf),
attr->btf_log_size);
if (IS_ERR(btf))
return PTR_ERR(btf);
ret = btf_alloc_id(btf);
if (ret) {
btf_free(btf);
return ret;
}
/*
* The BTF ID is published to the userspace.
* All BTF free must go through call_rcu() from
* now on (i.e. free by calling btf_put()).
*/
ret = __btf_new_fd(btf);
if (ret < 0)
btf_put(btf);
return ret;
}
struct btf *btf_get_by_fd(int fd)
{
struct btf *btf;
struct fd f;
f = fdget(fd);
if (!f.file)
return ERR_PTR(-EBADF);
if (f.file->f_op != &btf_fops) {
fdput(f);
return ERR_PTR(-EINVAL);
}
btf = f.file->private_data;
refcount_inc(&btf->refcnt);
fdput(f);
return btf;
}
int btf_get_info_by_fd(const struct btf *btf,
const union bpf_attr *attr,
union bpf_attr __user *uattr)
{
struct bpf_btf_info __user *uinfo;
struct bpf_btf_info info = {};
u32 info_copy, btf_copy;
void __user *ubtf;
u32 uinfo_len;
uinfo = u64_to_user_ptr(attr->info.info);
uinfo_len = attr->info.info_len;
info_copy = min_t(u32, uinfo_len, sizeof(info));
if (copy_from_user(&info, uinfo, info_copy))
return -EFAULT;
info.id = btf->id;
ubtf = u64_to_user_ptr(info.btf);
btf_copy = min_t(u32, btf->data_size, info.btf_size);
if (copy_to_user(ubtf, btf->data, btf_copy))
return -EFAULT;
info.btf_size = btf->data_size;
if (copy_to_user(uinfo, &info, info_copy) ||
put_user(info_copy, &uattr->info.info_len))
return -EFAULT;
return 0;
}
int btf_get_fd_by_id(u32 id)
{
struct btf *btf;
int fd;
rcu_read_lock();
btf = idr_find(&btf_idr, id);
if (!btf || !refcount_inc_not_zero(&btf->refcnt))
btf = ERR_PTR(-ENOENT);
rcu_read_unlock();
if (IS_ERR(btf))
return PTR_ERR(btf);
fd = __btf_new_fd(btf);
if (fd < 0)
btf_put(btf);
return fd;
}
u32 btf_id(const struct btf *btf)
{
return btf->id;
}