2019-06-04 16:11:33 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
/*
|
|
|
|
* SA11x0 DMAengine support
|
|
|
|
*
|
|
|
|
* Copyright (C) 2012 Russell King
|
|
|
|
* Derived in part from arch/arm/mach-sa1100/dma.c,
|
|
|
|
* Copyright (C) 2000, 2001 by Nicolas Pitre
|
|
|
|
*/
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/dmaengine.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
#include "virt-dma.h"
|
|
|
|
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
#define NR_PHY_CHAN 6
|
|
|
|
#define DMA_ALIGN 3
|
|
|
|
#define DMA_MAX_SIZE 0x1fff
|
|
|
|
#define DMA_CHUNK_SIZE 0x1000
|
|
|
|
|
|
|
|
#define DMA_DDAR 0x00
|
|
|
|
#define DMA_DCSR_S 0x04
|
|
|
|
#define DMA_DCSR_C 0x08
|
|
|
|
#define DMA_DCSR_R 0x0c
|
|
|
|
#define DMA_DBSA 0x10
|
|
|
|
#define DMA_DBTA 0x14
|
|
|
|
#define DMA_DBSB 0x18
|
|
|
|
#define DMA_DBTB 0x1c
|
|
|
|
#define DMA_SIZE 0x20
|
|
|
|
|
|
|
|
#define DCSR_RUN (1 << 0)
|
|
|
|
#define DCSR_IE (1 << 1)
|
|
|
|
#define DCSR_ERROR (1 << 2)
|
|
|
|
#define DCSR_DONEA (1 << 3)
|
|
|
|
#define DCSR_STRTA (1 << 4)
|
|
|
|
#define DCSR_DONEB (1 << 5)
|
|
|
|
#define DCSR_STRTB (1 << 6)
|
|
|
|
#define DCSR_BIU (1 << 7)
|
|
|
|
|
|
|
|
#define DDAR_RW (1 << 0) /* 0 = W, 1 = R */
|
|
|
|
#define DDAR_E (1 << 1) /* 0 = LE, 1 = BE */
|
|
|
|
#define DDAR_BS (1 << 2) /* 0 = BS4, 1 = BS8 */
|
|
|
|
#define DDAR_DW (1 << 3) /* 0 = 8b, 1 = 16b */
|
|
|
|
#define DDAR_Ser0UDCTr (0x0 << 4)
|
|
|
|
#define DDAR_Ser0UDCRc (0x1 << 4)
|
|
|
|
#define DDAR_Ser1SDLCTr (0x2 << 4)
|
|
|
|
#define DDAR_Ser1SDLCRc (0x3 << 4)
|
|
|
|
#define DDAR_Ser1UARTTr (0x4 << 4)
|
|
|
|
#define DDAR_Ser1UARTRc (0x5 << 4)
|
|
|
|
#define DDAR_Ser2ICPTr (0x6 << 4)
|
|
|
|
#define DDAR_Ser2ICPRc (0x7 << 4)
|
|
|
|
#define DDAR_Ser3UARTTr (0x8 << 4)
|
|
|
|
#define DDAR_Ser3UARTRc (0x9 << 4)
|
|
|
|
#define DDAR_Ser4MCP0Tr (0xa << 4)
|
|
|
|
#define DDAR_Ser4MCP0Rc (0xb << 4)
|
|
|
|
#define DDAR_Ser4MCP1Tr (0xc << 4)
|
|
|
|
#define DDAR_Ser4MCP1Rc (0xd << 4)
|
|
|
|
#define DDAR_Ser4SSPTr (0xe << 4)
|
|
|
|
#define DDAR_Ser4SSPRc (0xf << 4)
|
|
|
|
|
|
|
|
struct sa11x0_dma_sg {
|
|
|
|
u32 addr;
|
|
|
|
u32 len;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct sa11x0_dma_desc {
|
2012-04-13 19:07:23 +08:00
|
|
|
struct virt_dma_desc vd;
|
|
|
|
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
u32 ddar;
|
|
|
|
size_t size;
|
2012-05-16 01:34:33 +08:00
|
|
|
unsigned period;
|
|
|
|
bool cyclic;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
|
|
|
unsigned sglen;
|
2020-02-15 01:14:35 +08:00
|
|
|
struct sa11x0_dma_sg sg[];
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct sa11x0_dma_phy;
|
|
|
|
|
|
|
|
struct sa11x0_dma_chan {
|
2012-04-13 19:07:23 +08:00
|
|
|
struct virt_dma_chan vc;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
/* protected by c->vc.lock */
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
struct sa11x0_dma_phy *phy;
|
|
|
|
enum dma_status status;
|
|
|
|
|
|
|
|
/* protected by d->lock */
|
|
|
|
struct list_head node;
|
|
|
|
|
|
|
|
u32 ddar;
|
|
|
|
const char *name;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct sa11x0_dma_phy {
|
|
|
|
void __iomem *base;
|
|
|
|
struct sa11x0_dma_dev *dev;
|
|
|
|
unsigned num;
|
|
|
|
|
|
|
|
struct sa11x0_dma_chan *vchan;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
/* Protected by c->vc.lock */
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
unsigned sg_load;
|
|
|
|
struct sa11x0_dma_desc *txd_load;
|
|
|
|
unsigned sg_done;
|
|
|
|
struct sa11x0_dma_desc *txd_done;
|
|
|
|
u32 dbs[2];
|
|
|
|
u32 dbt[2];
|
|
|
|
u32 dcsr;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct sa11x0_dma_dev {
|
|
|
|
struct dma_device slave;
|
|
|
|
void __iomem *base;
|
|
|
|
spinlock_t lock;
|
|
|
|
struct tasklet_struct task;
|
|
|
|
struct list_head chan_pending;
|
|
|
|
struct sa11x0_dma_phy phy[NR_PHY_CHAN];
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan)
|
|
|
|
{
|
2012-04-13 19:07:23 +08:00
|
|
|
return container_of(chan, struct sa11x0_dma_chan, vc.chan);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev)
|
|
|
|
{
|
|
|
|
return container_of(dmadev, struct sa11x0_dma_dev, slave);
|
|
|
|
}
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
2012-04-13 19:07:23 +08:00
|
|
|
struct virt_dma_desc *vd = vchan_next_desc(&c->vc);
|
|
|
|
|
|
|
|
return vd ? container_of(vd, struct sa11x0_dma_desc, vd) : NULL;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
static void sa11x0_dma_free_desc(struct virt_dma_desc *vd)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
2012-04-13 19:07:23 +08:00
|
|
|
kfree(container_of(vd, struct sa11x0_dma_desc, vd));
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd)
|
|
|
|
{
|
2012-04-13 19:07:23 +08:00
|
|
|
list_del(&txd->vd.node);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
p->txd_load = txd;
|
|
|
|
p->sg_load = 0;
|
|
|
|
|
|
|
|
dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n",
|
2012-04-13 19:07:23 +08:00
|
|
|
p->num, &txd->vd, txd->vd.tx.cookie, txd->ddar);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p,
|
|
|
|
struct sa11x0_dma_chan *c)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_desc *txd = p->txd_load;
|
|
|
|
struct sa11x0_dma_sg *sg;
|
|
|
|
void __iomem *base = p->base;
|
|
|
|
unsigned dbsx, dbtx;
|
|
|
|
u32 dcsr;
|
|
|
|
|
|
|
|
if (!txd)
|
|
|
|
return;
|
|
|
|
|
|
|
|
dcsr = readl_relaxed(base + DMA_DCSR_R);
|
|
|
|
|
|
|
|
/* Don't try to load the next transfer if both buffers are started */
|
|
|
|
if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (p->sg_load == txd->sglen) {
|
2012-05-16 01:34:33 +08:00
|
|
|
if (!txd->cyclic) {
|
|
|
|
struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2012-05-16 01:34:33 +08:00
|
|
|
/*
|
|
|
|
* We have reached the end of the current descriptor.
|
|
|
|
* Peek at the next descriptor, and if compatible with
|
|
|
|
* the current, start processing it.
|
|
|
|
*/
|
|
|
|
if (txn && txn->ddar == txd->ddar) {
|
|
|
|
txd = txn;
|
|
|
|
sa11x0_dma_start_desc(p, txn);
|
|
|
|
} else {
|
|
|
|
p->txd_load = NULL;
|
|
|
|
return;
|
|
|
|
}
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
} else {
|
2012-05-16 01:34:33 +08:00
|
|
|
/* Cyclic: reset back to beginning */
|
|
|
|
p->sg_load = 0;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
sg = &txd->sg[p->sg_load++];
|
|
|
|
|
|
|
|
/* Select buffer to load according to channel status */
|
|
|
|
if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) ||
|
|
|
|
((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) {
|
|
|
|
dbsx = DMA_DBSA;
|
|
|
|
dbtx = DMA_DBTA;
|
|
|
|
dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN;
|
|
|
|
} else {
|
|
|
|
dbsx = DMA_DBSB;
|
|
|
|
dbtx = DMA_DBTB;
|
|
|
|
dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN;
|
|
|
|
}
|
|
|
|
|
|
|
|
writel_relaxed(sg->addr, base + dbsx);
|
|
|
|
writel_relaxed(sg->len, base + dbtx);
|
|
|
|
writel(dcsr, base + DMA_DCSR_S);
|
|
|
|
|
|
|
|
dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n",
|
|
|
|
p->num, dcsr,
|
|
|
|
'A' + (dbsx == DMA_DBSB), sg->addr,
|
|
|
|
'A' + (dbtx == DMA_DBTB), sg->len);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p,
|
|
|
|
struct sa11x0_dma_chan *c)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_desc *txd = p->txd_done;
|
|
|
|
|
|
|
|
if (++p->sg_done == txd->sglen) {
|
2012-05-16 01:34:33 +08:00
|
|
|
if (!txd->cyclic) {
|
|
|
|
vchan_cookie_complete(&txd->vd);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2012-05-16 01:34:33 +08:00
|
|
|
p->sg_done = 0;
|
|
|
|
p->txd_done = p->txd_load;
|
|
|
|
|
|
|
|
if (!p->txd_done)
|
|
|
|
tasklet_schedule(&p->dev->task);
|
|
|
|
} else {
|
|
|
|
if ((p->sg_done % txd->period) == 0)
|
|
|
|
vchan_cyclic_callback(&txd->vd);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2012-05-16 01:34:33 +08:00
|
|
|
/* Cyclic: reset back to beginning */
|
|
|
|
p->sg_done = 0;
|
|
|
|
}
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
sa11x0_dma_start_sg(p, c);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_phy *p = dev_id;
|
|
|
|
struct sa11x0_dma_dev *d = p->dev;
|
|
|
|
struct sa11x0_dma_chan *c;
|
|
|
|
u32 dcsr;
|
|
|
|
|
|
|
|
dcsr = readl_relaxed(p->base + DMA_DCSR_R);
|
|
|
|
if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB)))
|
|
|
|
return IRQ_NONE;
|
|
|
|
|
|
|
|
/* Clear reported status bits */
|
|
|
|
writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB),
|
|
|
|
p->base + DMA_DCSR_C);
|
|
|
|
|
|
|
|
dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr);
|
|
|
|
|
|
|
|
if (dcsr & DCSR_ERROR) {
|
|
|
|
dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n",
|
|
|
|
p->num, dcsr,
|
|
|
|
readl_relaxed(p->base + DMA_DDAR),
|
|
|
|
readl_relaxed(p->base + DMA_DBSA),
|
|
|
|
readl_relaxed(p->base + DMA_DBTA),
|
|
|
|
readl_relaxed(p->base + DMA_DBSB),
|
|
|
|
readl_relaxed(p->base + DMA_DBTB));
|
|
|
|
}
|
|
|
|
|
|
|
|
c = p->vchan;
|
|
|
|
if (c) {
|
|
|
|
unsigned long flags;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_lock_irqsave(&c->vc.lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
/*
|
|
|
|
* Now that we're holding the lock, check that the vchan
|
|
|
|
* really is associated with this pchan before touching the
|
|
|
|
* hardware. This should always succeed, because we won't
|
|
|
|
* change p->vchan or c->phy while the channel is actively
|
|
|
|
* transferring.
|
|
|
|
*/
|
|
|
|
if (c->phy == p) {
|
|
|
|
if (dcsr & DCSR_DONEA)
|
|
|
|
sa11x0_dma_complete(p, c);
|
|
|
|
if (dcsr & DCSR_DONEB)
|
|
|
|
sa11x0_dma_complete(p, c);
|
|
|
|
}
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_unlock_irqrestore(&c->vc.lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c);
|
|
|
|
|
|
|
|
/* If the issued list is empty, we have no further txds to process */
|
|
|
|
if (txd) {
|
|
|
|
struct sa11x0_dma_phy *p = c->phy;
|
|
|
|
|
|
|
|
sa11x0_dma_start_desc(p, txd);
|
|
|
|
p->txd_done = txd;
|
|
|
|
p->sg_done = 0;
|
|
|
|
|
|
|
|
/* The channel should not have any transfers started */
|
|
|
|
WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) &
|
|
|
|
(DCSR_STRTA | DCSR_STRTB));
|
|
|
|
|
|
|
|
/* Clear the run and start bits before changing DDAR */
|
|
|
|
writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB,
|
|
|
|
p->base + DMA_DCSR_C);
|
|
|
|
writel_relaxed(txd->ddar, p->base + DMA_DDAR);
|
|
|
|
|
|
|
|
/* Try to start both buffers */
|
|
|
|
sa11x0_dma_start_sg(p, c);
|
|
|
|
sa11x0_dma_start_sg(p, c);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-08-31 18:35:30 +08:00
|
|
|
static void sa11x0_dma_tasklet(struct tasklet_struct *t)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
2020-08-31 18:35:30 +08:00
|
|
|
struct sa11x0_dma_dev *d = from_tasklet(d, t, task);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
struct sa11x0_dma_phy *p;
|
|
|
|
struct sa11x0_dma_chan *c;
|
|
|
|
unsigned pch, pch_alloc = 0;
|
|
|
|
|
|
|
|
dev_dbg(d->slave.dev, "tasklet enter\n");
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
list_for_each_entry(c, &d->slave.channels, vc.chan.device_node) {
|
|
|
|
spin_lock_irq(&c->vc.lock);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
p = c->phy;
|
2012-04-13 19:07:23 +08:00
|
|
|
if (p && !p->txd_done) {
|
|
|
|
sa11x0_dma_start_txd(c);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
if (!p->txd_done) {
|
|
|
|
/* No current txd associated with this channel */
|
|
|
|
dev_dbg(d->slave.dev, "pchan %u: free\n", p->num);
|
|
|
|
|
|
|
|
/* Mark this channel free */
|
|
|
|
c->phy = NULL;
|
|
|
|
p->vchan = NULL;
|
|
|
|
}
|
|
|
|
}
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_unlock_irq(&c->vc.lock);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irq(&d->lock);
|
|
|
|
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
|
|
|
|
p = &d->phy[pch];
|
|
|
|
|
|
|
|
if (p->vchan == NULL && !list_empty(&d->chan_pending)) {
|
|
|
|
c = list_first_entry(&d->chan_pending,
|
|
|
|
struct sa11x0_dma_chan, node);
|
|
|
|
list_del_init(&c->node);
|
|
|
|
|
|
|
|
pch_alloc |= 1 << pch;
|
|
|
|
|
|
|
|
/* Mark this channel allocated */
|
|
|
|
p->vchan = c;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, &c->vc);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irq(&d->lock);
|
|
|
|
|
|
|
|
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
|
|
|
|
if (pch_alloc & (1 << pch)) {
|
|
|
|
p = &d->phy[pch];
|
|
|
|
c = p->vchan;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_lock_irq(&c->vc.lock);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
c->phy = p;
|
|
|
|
|
|
|
|
sa11x0_dma_start_txd(c);
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_unlock_irq(&c->vc.lock);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(d->slave.dev, "tasklet exit\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void sa11x0_dma_free_chan_resources(struct dma_chan *chan)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
|
|
|
|
unsigned long flags;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_lock_irqsave(&d->lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
list_del_init(&c->node);
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_unlock_irqrestore(&d->lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
vchan_free_chan_resources(&c->vc);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p)
|
|
|
|
{
|
|
|
|
unsigned reg;
|
|
|
|
u32 dcsr;
|
|
|
|
|
|
|
|
dcsr = readl_relaxed(p->base + DMA_DCSR_R);
|
|
|
|
|
|
|
|
if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA ||
|
|
|
|
(dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU)
|
|
|
|
reg = DMA_DBSA;
|
|
|
|
else
|
|
|
|
reg = DMA_DBSB;
|
|
|
|
|
|
|
|
return readl_relaxed(p->base + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan,
|
|
|
|
dma_cookie_t cookie, struct dma_tx_state *state)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
|
|
|
|
struct sa11x0_dma_phy *p;
|
2012-05-11 06:45:24 +08:00
|
|
|
struct virt_dma_desc *vd;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
unsigned long flags;
|
|
|
|
enum dma_status ret;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
ret = dma_cookie_status(&c->vc.chan, cookie, state);
|
2013-10-16 23:33:47 +08:00
|
|
|
if (ret == DMA_COMPLETE)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
return ret;
|
|
|
|
|
2012-05-11 06:45:24 +08:00
|
|
|
if (!state)
|
|
|
|
return c->status;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_lock_irqsave(&c->vc.lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
p = c->phy;
|
|
|
|
|
2012-05-11 06:45:24 +08:00
|
|
|
/*
|
|
|
|
* If the cookie is on our issue queue, then the residue is
|
|
|
|
* its total size.
|
|
|
|
*/
|
|
|
|
vd = vchan_find_desc(&c->vc, cookie);
|
|
|
|
if (vd) {
|
|
|
|
state->residue = container_of(vd, struct sa11x0_dma_desc, vd)->size;
|
|
|
|
} else if (!p) {
|
|
|
|
state->residue = 0;
|
|
|
|
} else {
|
|
|
|
struct sa11x0_dma_desc *txd;
|
|
|
|
size_t bytes = 0;
|
|
|
|
|
|
|
|
if (p->txd_done && p->txd_done->vd.tx.cookie == cookie)
|
|
|
|
txd = p->txd_done;
|
|
|
|
else if (p->txd_load && p->txd_load->vd.tx.cookie == cookie)
|
|
|
|
txd = p->txd_load;
|
|
|
|
else
|
|
|
|
txd = NULL;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2012-05-11 06:45:24 +08:00
|
|
|
ret = c->status;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
if (txd) {
|
2012-05-11 06:45:24 +08:00
|
|
|
dma_addr_t addr = sa11x0_dma_pos(p);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
unsigned i;
|
|
|
|
|
2016-09-14 17:45:43 +08:00
|
|
|
dev_vdbg(d->slave.dev, "tx_status: addr:%pad\n", &addr);
|
2012-05-11 06:45:24 +08:00
|
|
|
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
for (i = 0; i < txd->sglen; i++) {
|
|
|
|
dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n",
|
|
|
|
i, txd->sg[i].addr, txd->sg[i].len);
|
|
|
|
if (addr >= txd->sg[i].addr &&
|
|
|
|
addr < txd->sg[i].addr + txd->sg[i].len) {
|
|
|
|
unsigned len;
|
|
|
|
|
|
|
|
len = txd->sg[i].len -
|
|
|
|
(addr - txd->sg[i].addr);
|
|
|
|
dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n",
|
|
|
|
i, len);
|
|
|
|
bytes += len;
|
|
|
|
i++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
for (; i < txd->sglen; i++) {
|
|
|
|
dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n",
|
|
|
|
i, txd->sg[i].addr, txd->sg[i].len);
|
|
|
|
bytes += txd->sg[i].len;
|
|
|
|
}
|
|
|
|
}
|
2012-05-11 06:45:24 +08:00
|
|
|
state->residue = bytes;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_unlock_irqrestore(&c->vc.lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2016-09-14 17:52:49 +08:00
|
|
|
dev_vdbg(d->slave.dev, "tx_status: bytes 0x%x\n", state->residue);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Move pending txds to the issued list, and re-init pending list.
|
|
|
|
* If not already pending, add this channel to the list of pending
|
|
|
|
* channels and trigger the tasklet to run.
|
|
|
|
*/
|
|
|
|
static void sa11x0_dma_issue_pending(struct dma_chan *chan)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
|
|
|
|
unsigned long flags;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
spin_lock_irqsave(&c->vc.lock, flags);
|
|
|
|
if (vchan_issue_pending(&c->vc)) {
|
|
|
|
if (!c->phy) {
|
|
|
|
spin_lock(&d->lock);
|
|
|
|
if (list_empty(&c->node)) {
|
|
|
|
list_add_tail(&c->node, &d->chan_pending);
|
|
|
|
tasklet_schedule(&d->task);
|
|
|
|
dev_dbg(d->slave.dev, "vchan %p: issued\n", &c->vc);
|
|
|
|
}
|
|
|
|
spin_unlock(&d->lock);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
} else
|
2012-04-13 19:07:23 +08:00
|
|
|
dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", &c->vc);
|
|
|
|
spin_unlock_irqrestore(&c->vc.lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg(
|
|
|
|
struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen,
|
2012-03-30 18:44:15 +08:00
|
|
|
enum dma_transfer_direction dir, unsigned long flags, void *context)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_desc *txd;
|
|
|
|
struct scatterlist *sgent;
|
|
|
|
unsigned i, j = sglen;
|
|
|
|
size_t size = 0;
|
|
|
|
|
|
|
|
/* SA11x0 channels can only operate in their native direction */
|
|
|
|
if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) {
|
|
|
|
dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n",
|
2012-04-13 19:07:23 +08:00
|
|
|
&c->vc, c->ddar, dir);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Do not allow zero-sized txds */
|
|
|
|
if (sglen == 0)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
for_each_sg(sg, sgent, sglen, i) {
|
|
|
|
dma_addr_t addr = sg_dma_address(sgent);
|
|
|
|
unsigned int len = sg_dma_len(sgent);
|
|
|
|
|
|
|
|
if (len > DMA_MAX_SIZE)
|
|
|
|
j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1;
|
|
|
|
if (addr & DMA_ALIGN) {
|
2016-09-14 17:45:43 +08:00
|
|
|
dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %pad\n",
|
|
|
|
&c->vc, &addr);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:
// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
// sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@
- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-09 04:45:50 +08:00
|
|
|
txd = kzalloc(struct_size(txd, sg, j), GFP_ATOMIC);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
if (!txd) {
|
2012-04-13 19:07:23 +08:00
|
|
|
dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", &c->vc);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
j = 0;
|
|
|
|
for_each_sg(sg, sgent, sglen, i) {
|
|
|
|
dma_addr_t addr = sg_dma_address(sgent);
|
|
|
|
unsigned len = sg_dma_len(sgent);
|
|
|
|
|
|
|
|
size += len;
|
|
|
|
|
|
|
|
do {
|
|
|
|
unsigned tlen = len;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check whether the transfer will fit. If not, try
|
|
|
|
* to split the transfer up such that we end up with
|
|
|
|
* equal chunks - but make sure that we preserve the
|
|
|
|
* alignment. This avoids small segments.
|
|
|
|
*/
|
|
|
|
if (tlen > DMA_MAX_SIZE) {
|
|
|
|
unsigned mult = DIV_ROUND_UP(tlen,
|
|
|
|
DMA_MAX_SIZE & ~DMA_ALIGN);
|
|
|
|
|
|
|
|
tlen = (tlen / mult) & ~DMA_ALIGN;
|
|
|
|
}
|
|
|
|
|
|
|
|
txd->sg[j].addr = addr;
|
|
|
|
txd->sg[j].len = tlen;
|
|
|
|
|
|
|
|
addr += tlen;
|
|
|
|
len -= tlen;
|
|
|
|
j++;
|
|
|
|
} while (len);
|
|
|
|
}
|
|
|
|
|
|
|
|
txd->ddar = c->ddar;
|
|
|
|
txd->size = size;
|
|
|
|
txd->sglen = j;
|
|
|
|
|
2016-09-14 17:52:49 +08:00
|
|
|
dev_dbg(chan->device->dev, "vchan %p: txd %p: size %zu nr %u\n",
|
2012-04-13 19:07:23 +08:00
|
|
|
&c->vc, &txd->vd, txd->size, txd->sglen);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
return vchan_tx_prep(&c->vc, &txd->vd, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
2012-05-16 01:34:33 +08:00
|
|
|
static struct dma_async_tx_descriptor *sa11x0_dma_prep_dma_cyclic(
|
|
|
|
struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
|
2014-08-01 18:20:10 +08:00
|
|
|
enum dma_transfer_direction dir, unsigned long flags)
|
2012-05-16 01:34:33 +08:00
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_desc *txd;
|
|
|
|
unsigned i, j, k, sglen, sgperiod;
|
|
|
|
|
|
|
|
/* SA11x0 channels can only operate in their native direction */
|
|
|
|
if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) {
|
|
|
|
dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n",
|
|
|
|
&c->vc, c->ddar, dir);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
sgperiod = DIV_ROUND_UP(period, DMA_MAX_SIZE & ~DMA_ALIGN);
|
|
|
|
sglen = size * sgperiod / period;
|
|
|
|
|
|
|
|
/* Do not allow zero-sized txds */
|
|
|
|
if (sglen == 0)
|
|
|
|
return NULL;
|
|
|
|
|
treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:
// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
// sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@
- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-09 04:45:50 +08:00
|
|
|
txd = kzalloc(struct_size(txd, sg, sglen), GFP_ATOMIC);
|
2012-05-16 01:34:33 +08:00
|
|
|
if (!txd) {
|
|
|
|
dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", &c->vc);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = k = 0; i < size / period; i++) {
|
|
|
|
size_t tlen, len = period;
|
|
|
|
|
|
|
|
for (j = 0; j < sgperiod; j++, k++) {
|
|
|
|
tlen = len;
|
|
|
|
|
|
|
|
if (tlen > DMA_MAX_SIZE) {
|
|
|
|
unsigned mult = DIV_ROUND_UP(tlen, DMA_MAX_SIZE & ~DMA_ALIGN);
|
|
|
|
tlen = (tlen / mult) & ~DMA_ALIGN;
|
|
|
|
}
|
|
|
|
|
|
|
|
txd->sg[k].addr = addr;
|
|
|
|
txd->sg[k].len = tlen;
|
|
|
|
addr += tlen;
|
|
|
|
len -= tlen;
|
|
|
|
}
|
|
|
|
|
|
|
|
WARN_ON(len != 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
WARN_ON(k != sglen);
|
|
|
|
|
|
|
|
txd->ddar = c->ddar;
|
|
|
|
txd->size = size;
|
|
|
|
txd->sglen = sglen;
|
|
|
|
txd->cyclic = 1;
|
|
|
|
txd->period = sgperiod;
|
|
|
|
|
|
|
|
return vchan_tx_prep(&c->vc, &txd->vd, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
|
|
}
|
|
|
|
|
2015-01-14 04:16:22 +08:00
|
|
|
static int sa11x0_dma_device_config(struct dma_chan *chan,
|
|
|
|
struct dma_slave_config *cfg)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
2014-11-17 21:42:32 +08:00
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW);
|
|
|
|
dma_addr_t addr;
|
|
|
|
enum dma_slave_buswidth width;
|
|
|
|
u32 maxburst;
|
|
|
|
|
|
|
|
if (ddar & DDAR_RW) {
|
|
|
|
addr = cfg->src_addr;
|
|
|
|
width = cfg->src_addr_width;
|
|
|
|
maxburst = cfg->src_maxburst;
|
|
|
|
} else {
|
|
|
|
addr = cfg->dst_addr;
|
|
|
|
width = cfg->dst_addr_width;
|
|
|
|
maxburst = cfg->dst_maxburst;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE &&
|
|
|
|
width != DMA_SLAVE_BUSWIDTH_2_BYTES) ||
|
|
|
|
(maxburst != 4 && maxburst != 8))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
|
|
|
|
ddar |= DDAR_DW;
|
|
|
|
if (maxburst == 8)
|
|
|
|
ddar |= DDAR_BS;
|
|
|
|
|
2016-09-14 17:45:43 +08:00
|
|
|
dev_dbg(c->vc.chan.device->dev, "vchan %p: dma_slave_config addr %pad width %u burst %u\n",
|
|
|
|
&c->vc, &addr, width, maxburst);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
|
|
|
c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-01-14 04:16:22 +08:00
|
|
|
static int sa11x0_dma_device_pause(struct dma_chan *chan)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
|
|
|
|
struct sa11x0_dma_phy *p;
|
|
|
|
unsigned long flags;
|
|
|
|
|
2014-11-17 21:42:32 +08:00
|
|
|
dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc);
|
|
|
|
spin_lock_irqsave(&c->vc.lock, flags);
|
|
|
|
if (c->status == DMA_IN_PROGRESS) {
|
|
|
|
c->status = DMA_PAUSED;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
|
|
|
p = c->phy;
|
|
|
|
if (p) {
|
2014-11-17 21:42:32 +08:00
|
|
|
writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
|
|
|
|
} else {
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
spin_lock(&d->lock);
|
2014-11-17 21:42:32 +08:00
|
|
|
list_del_init(&c->node);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
spin_unlock(&d->lock);
|
|
|
|
}
|
2014-11-17 21:42:32 +08:00
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&c->vc.lock, flags);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2014-11-17 21:42:32 +08:00
|
|
|
return 0;
|
|
|
|
}
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2015-01-14 04:16:22 +08:00
|
|
|
static int sa11x0_dma_device_resume(struct dma_chan *chan)
|
2014-11-17 21:42:32 +08:00
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
|
|
|
|
struct sa11x0_dma_phy *p;
|
|
|
|
unsigned long flags;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2014-11-17 21:42:32 +08:00
|
|
|
dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc);
|
|
|
|
spin_lock_irqsave(&c->vc.lock, flags);
|
|
|
|
if (c->status == DMA_PAUSED) {
|
|
|
|
c->status = DMA_IN_PROGRESS;
|
|
|
|
|
|
|
|
p = c->phy;
|
|
|
|
if (p) {
|
|
|
|
writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S);
|
|
|
|
} else if (!list_empty(&c->vc.desc_issued)) {
|
|
|
|
spin_lock(&d->lock);
|
|
|
|
list_add_tail(&c->node, &d->chan_pending);
|
|
|
|
spin_unlock(&d->lock);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
2014-11-17 21:42:32 +08:00
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&c->vc.lock, flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-01-14 04:16:22 +08:00
|
|
|
static int sa11x0_dma_device_terminate_all(struct dma_chan *chan)
|
2014-11-17 21:42:32 +08:00
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
|
|
|
|
struct sa11x0_dma_phy *p;
|
|
|
|
LIST_HEAD(head);
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc);
|
|
|
|
/* Clear the tx descriptor lists */
|
|
|
|
spin_lock_irqsave(&c->vc.lock, flags);
|
|
|
|
vchan_get_all_descriptors(&c->vc, &head);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2014-11-17 21:42:32 +08:00
|
|
|
p = c->phy;
|
|
|
|
if (p) {
|
|
|
|
dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num);
|
|
|
|
/* vchan is assigned to a pchan - stop the channel */
|
|
|
|
writel(DCSR_RUN | DCSR_IE |
|
|
|
|
DCSR_STRTA | DCSR_DONEA |
|
|
|
|
DCSR_STRTB | DCSR_DONEB,
|
|
|
|
p->base + DMA_DCSR_C);
|
|
|
|
|
|
|
|
if (p->txd_load) {
|
|
|
|
if (p->txd_load != p->txd_done)
|
|
|
|
list_add_tail(&p->txd_load->vd.node, &head);
|
|
|
|
p->txd_load = NULL;
|
|
|
|
}
|
|
|
|
if (p->txd_done) {
|
|
|
|
list_add_tail(&p->txd_done->vd.node, &head);
|
|
|
|
p->txd_done = NULL;
|
|
|
|
}
|
|
|
|
c->phy = NULL;
|
|
|
|
spin_lock(&d->lock);
|
|
|
|
p->vchan = NULL;
|
|
|
|
spin_unlock(&d->lock);
|
|
|
|
tasklet_schedule(&d->task);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
2014-11-17 21:42:32 +08:00
|
|
|
spin_unlock_irqrestore(&c->vc.lock, flags);
|
|
|
|
vchan_dma_desc_free_list(&c->vc, &head);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
2014-11-17 21:42:32 +08:00
|
|
|
return 0;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
struct sa11x0_dma_channel_desc {
|
|
|
|
u32 ddar;
|
|
|
|
const char *name;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 }
|
|
|
|
static const struct sa11x0_dma_channel_desc chan_desc[] = {
|
|
|
|
CD(Ser0UDCTr, 0),
|
|
|
|
CD(Ser0UDCRc, DDAR_RW),
|
|
|
|
CD(Ser1SDLCTr, 0),
|
|
|
|
CD(Ser1SDLCRc, DDAR_RW),
|
|
|
|
CD(Ser1UARTTr, 0),
|
|
|
|
CD(Ser1UARTRc, DDAR_RW),
|
|
|
|
CD(Ser2ICPTr, 0),
|
|
|
|
CD(Ser2ICPRc, DDAR_RW),
|
|
|
|
CD(Ser3UARTTr, 0),
|
|
|
|
CD(Ser3UARTRc, DDAR_RW),
|
|
|
|
CD(Ser4MCP0Tr, 0),
|
|
|
|
CD(Ser4MCP0Rc, DDAR_RW),
|
|
|
|
CD(Ser4MCP1Tr, 0),
|
|
|
|
CD(Ser4MCP1Rc, DDAR_RW),
|
|
|
|
CD(Ser4SSPTr, 0),
|
|
|
|
CD(Ser4SSPRc, DDAR_RW),
|
|
|
|
};
|
|
|
|
|
2017-09-26 22:10:02 +08:00
|
|
|
static const struct dma_slave_map sa11x0_dma_map[] = {
|
|
|
|
{ "sa11x0-ir", "tx", "Ser2ICPTr" },
|
|
|
|
{ "sa11x0-ir", "rx", "Ser2ICPRc" },
|
|
|
|
{ "sa11x0-ssp", "tx", "Ser4SSPTr" },
|
|
|
|
{ "sa11x0-ssp", "rx", "Ser4SSPRc" },
|
|
|
|
};
|
|
|
|
|
2018-11-06 21:45:10 +08:00
|
|
|
static bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
|
|
|
|
const char *p = param;
|
|
|
|
|
|
|
|
return !strcmp(c->name, p);
|
|
|
|
}
|
|
|
|
|
2012-11-20 02:22:55 +08:00
|
|
|
static int sa11x0_dma_init_dmadev(struct dma_device *dmadev,
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
struct device *dev)
|
|
|
|
{
|
|
|
|
unsigned i;
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&dmadev->channels);
|
|
|
|
dmadev->dev = dev;
|
|
|
|
dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources;
|
2015-01-14 04:16:22 +08:00
|
|
|
dmadev->device_config = sa11x0_dma_device_config;
|
|
|
|
dmadev->device_pause = sa11x0_dma_device_pause;
|
|
|
|
dmadev->device_resume = sa11x0_dma_device_resume;
|
|
|
|
dmadev->device_terminate_all = sa11x0_dma_device_terminate_all;
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
dmadev->device_tx_status = sa11x0_dma_tx_status;
|
|
|
|
dmadev->device_issue_pending = sa11x0_dma_issue_pending;
|
|
|
|
|
2014-10-16 17:01:00 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(chan_desc); i++) {
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
struct sa11x0_dma_chan *c;
|
|
|
|
|
|
|
|
c = kzalloc(sizeof(*c), GFP_KERNEL);
|
|
|
|
if (!c) {
|
|
|
|
dev_err(dev, "no memory for channel %u\n", i);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
c->status = DMA_IN_PROGRESS;
|
|
|
|
c->ddar = chan_desc[i].ddar;
|
|
|
|
c->name = chan_desc[i].name;
|
|
|
|
INIT_LIST_HEAD(&c->node);
|
2012-04-13 19:07:23 +08:00
|
|
|
|
|
|
|
c->vc.desc_free = sa11x0_dma_free_desc;
|
|
|
|
vchan_init(&c->vc, dmadev);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return dma_async_device_register(dmadev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
int irq = platform_get_irq(pdev, nr);
|
|
|
|
|
|
|
|
if (irq <= 0)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr,
|
|
|
|
void *data)
|
|
|
|
{
|
|
|
|
int irq = platform_get_irq(pdev, nr);
|
|
|
|
if (irq > 0)
|
|
|
|
free_irq(irq, data);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sa11x0_dma_free_channels(struct dma_device *dmadev)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_chan *c, *cn;
|
|
|
|
|
2012-04-13 19:07:23 +08:00
|
|
|
list_for_each_entry_safe(c, cn, &dmadev->channels, vc.chan.device_node) {
|
|
|
|
list_del(&c->vc.chan.device_node);
|
|
|
|
tasklet_kill(&c->vc.task);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
kfree(c);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-11-20 02:22:55 +08:00
|
|
|
static int sa11x0_dma_probe(struct platform_device *pdev)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
|
|
|
struct sa11x0_dma_dev *d;
|
|
|
|
struct resource *res;
|
|
|
|
unsigned i;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
d = kzalloc(sizeof(*d), GFP_KERNEL);
|
|
|
|
if (!d) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto err_alloc;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_init(&d->lock);
|
|
|
|
INIT_LIST_HEAD(&d->chan_pending);
|
|
|
|
|
2017-09-26 22:10:02 +08:00
|
|
|
d->slave.filter.fn = sa11x0_dma_filter_fn;
|
|
|
|
d->slave.filter.mapcnt = ARRAY_SIZE(sa11x0_dma_map);
|
|
|
|
d->slave.filter.map = sa11x0_dma_map;
|
|
|
|
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
d->base = ioremap(res->start, resource_size(res));
|
|
|
|
if (!d->base) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto err_ioremap;
|
|
|
|
}
|
|
|
|
|
2020-08-31 18:35:30 +08:00
|
|
|
tasklet_setup(&d->task, sa11x0_dma_tasklet);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
|
|
|
|
for (i = 0; i < NR_PHY_CHAN; i++) {
|
|
|
|
struct sa11x0_dma_phy *p = &d->phy[i];
|
|
|
|
|
|
|
|
p->dev = d;
|
|
|
|
p->num = i;
|
|
|
|
p->base = d->base + i * DMA_SIZE;
|
|
|
|
writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR |
|
|
|
|
DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB,
|
|
|
|
p->base + DMA_DCSR_C);
|
|
|
|
writel_relaxed(0, p->base + DMA_DDAR);
|
|
|
|
|
|
|
|
ret = sa11x0_dma_request_irq(pdev, i, p);
|
|
|
|
if (ret) {
|
|
|
|
while (i) {
|
|
|
|
i--;
|
|
|
|
sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
|
|
|
|
}
|
|
|
|
goto err_irq;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
dma_cap_set(DMA_SLAVE, d->slave.cap_mask);
|
2012-05-16 01:34:33 +08:00
|
|
|
dma_cap_set(DMA_CYCLIC, d->slave.cap_mask);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg;
|
2012-05-16 01:34:33 +08:00
|
|
|
d->slave.device_prep_dma_cyclic = sa11x0_dma_prep_dma_cyclic;
|
2015-04-02 23:39:31 +08:00
|
|
|
d->slave.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
|
|
|
|
d->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
|
|
|
|
d->slave.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES);
|
|
|
|
d->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES);
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev);
|
|
|
|
if (ret) {
|
|
|
|
dev_warn(d->slave.dev, "failed to register slave async device: %d\n",
|
|
|
|
ret);
|
|
|
|
goto err_slave_reg;
|
|
|
|
}
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, d);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_slave_reg:
|
|
|
|
sa11x0_dma_free_channels(&d->slave);
|
|
|
|
for (i = 0; i < NR_PHY_CHAN; i++)
|
|
|
|
sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
|
|
|
|
err_irq:
|
|
|
|
tasklet_kill(&d->task);
|
|
|
|
iounmap(d->base);
|
|
|
|
err_ioremap:
|
|
|
|
kfree(d);
|
|
|
|
err_alloc:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-12-22 07:09:59 +08:00
|
|
|
static int sa11x0_dma_remove(struct platform_device *pdev)
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
{
|
|
|
|
struct sa11x0_dma_dev *d = platform_get_drvdata(pdev);
|
|
|
|
unsigned pch;
|
|
|
|
|
|
|
|
dma_async_device_unregister(&d->slave);
|
|
|
|
|
|
|
|
sa11x0_dma_free_channels(&d->slave);
|
|
|
|
for (pch = 0; pch < NR_PHY_CHAN; pch++)
|
|
|
|
sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]);
|
|
|
|
tasklet_kill(&d->task);
|
|
|
|
iounmap(d->base);
|
|
|
|
kfree(d);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sa11x0_dma_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
|
|
|
|
unsigned pch;
|
|
|
|
|
|
|
|
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
|
|
|
|
struct sa11x0_dma_phy *p = &d->phy[pch];
|
|
|
|
u32 dcsr, saved_dcsr;
|
|
|
|
|
|
|
|
dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R);
|
|
|
|
if (dcsr & DCSR_RUN) {
|
|
|
|
writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
|
|
|
|
dcsr = readl_relaxed(p->base + DMA_DCSR_R);
|
|
|
|
}
|
|
|
|
|
|
|
|
saved_dcsr &= DCSR_RUN | DCSR_IE;
|
|
|
|
if (dcsr & DCSR_BIU) {
|
|
|
|
p->dbs[0] = readl_relaxed(p->base + DMA_DBSB);
|
|
|
|
p->dbt[0] = readl_relaxed(p->base + DMA_DBTB);
|
|
|
|
p->dbs[1] = readl_relaxed(p->base + DMA_DBSA);
|
|
|
|
p->dbt[1] = readl_relaxed(p->base + DMA_DBTA);
|
|
|
|
saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) |
|
|
|
|
(dcsr & DCSR_STRTB ? DCSR_STRTA : 0);
|
|
|
|
} else {
|
|
|
|
p->dbs[0] = readl_relaxed(p->base + DMA_DBSA);
|
|
|
|
p->dbt[0] = readl_relaxed(p->base + DMA_DBTA);
|
|
|
|
p->dbs[1] = readl_relaxed(p->base + DMA_DBSB);
|
|
|
|
p->dbt[1] = readl_relaxed(p->base + DMA_DBTB);
|
|
|
|
saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB);
|
|
|
|
}
|
|
|
|
p->dcsr = saved_dcsr;
|
|
|
|
|
|
|
|
writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sa11x0_dma_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
|
|
|
|
unsigned pch;
|
|
|
|
|
|
|
|
for (pch = 0; pch < NR_PHY_CHAN; pch++) {
|
|
|
|
struct sa11x0_dma_phy *p = &d->phy[pch];
|
|
|
|
struct sa11x0_dma_desc *txd = NULL;
|
|
|
|
u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R);
|
|
|
|
|
|
|
|
WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN));
|
|
|
|
|
|
|
|
if (p->txd_done)
|
|
|
|
txd = p->txd_done;
|
|
|
|
else if (p->txd_load)
|
|
|
|
txd = p->txd_load;
|
|
|
|
|
|
|
|
if (!txd)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
writel_relaxed(txd->ddar, p->base + DMA_DDAR);
|
|
|
|
|
|
|
|
writel_relaxed(p->dbs[0], p->base + DMA_DBSA);
|
|
|
|
writel_relaxed(p->dbt[0], p->base + DMA_DBTA);
|
|
|
|
writel_relaxed(p->dbs[1], p->base + DMA_DBSB);
|
|
|
|
writel_relaxed(p->dbt[1], p->base + DMA_DBTB);
|
|
|
|
writel_relaxed(p->dcsr, p->base + DMA_DCSR_S);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct dev_pm_ops sa11x0_dma_pm_ops = {
|
|
|
|
.suspend_noirq = sa11x0_dma_suspend,
|
|
|
|
.resume_noirq = sa11x0_dma_resume,
|
|
|
|
.freeze_noirq = sa11x0_dma_suspend,
|
|
|
|
.thaw_noirq = sa11x0_dma_resume,
|
|
|
|
.poweroff_noirq = sa11x0_dma_suspend,
|
|
|
|
.restore_noirq = sa11x0_dma_resume,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_driver sa11x0_dma_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "sa11x0-dma",
|
|
|
|
.pm = &sa11x0_dma_pm_ops,
|
|
|
|
},
|
|
|
|
.probe = sa11x0_dma_probe,
|
2012-11-20 02:20:04 +08:00
|
|
|
.remove = sa11x0_dma_remove,
|
DMA: sa11x0: add SA-11x0 DMA driver
Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.
We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done. This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.
Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels. As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-10 05:44:07 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static int __init sa11x0_dma_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&sa11x0_dma_driver);
|
|
|
|
}
|
|
|
|
subsys_initcall(sa11x0_dma_init);
|
|
|
|
|
|
|
|
static void __exit sa11x0_dma_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&sa11x0_dma_driver);
|
|
|
|
}
|
|
|
|
module_exit(sa11x0_dma_exit);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Russell King");
|
|
|
|
MODULE_DESCRIPTION("SA-11x0 DMA driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
MODULE_ALIAS("platform:sa11x0-dma");
|