OpenCloudOS-Kernel/drivers/media/rc/ir-sony-decoder.c

241 lines
5.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol
*
* Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
*/
#include <linux/bitrev.h>
#include <linux/module.h>
#include "rc-core-priv.h"
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-24 01:23:05 +08:00
#define SONY_UNIT 600 /* us */
#define SONY_HEADER_PULSE (4 * SONY_UNIT)
#define SONY_HEADER_SPACE (1 * SONY_UNIT)
#define SONY_BIT_0_PULSE (1 * SONY_UNIT)
#define SONY_BIT_1_PULSE (2 * SONY_UNIT)
#define SONY_BIT_SPACE (1 * SONY_UNIT)
#define SONY_TRAILER_SPACE (10 * SONY_UNIT) /* minimum */
enum sony_state {
STATE_INACTIVE,
STATE_HEADER_SPACE,
STATE_BIT_PULSE,
STATE_BIT_SPACE,
STATE_FINISHED,
};
/**
* ir_sony_decode() - Decode one Sony pulse or space
* @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct sony_dec *data = &dev->raw->sony;
enum rc_proto protocol;
u32 scancode;
u8 device, subdevice, function;
if (!is_timing_event(ev)) {
if (ev.overflow)
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2))
goto out;
dev_dbg(&dev->dev, "Sony decode started at state %d (%uus %s)\n",
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-24 01:23:05 +08:00
data->state, ev.duration, TO_STR(ev.pulse));
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2))
break;
data->count = 0;
data->state = STATE_HEADER_SPACE;
return 0;
case STATE_HEADER_SPACE:
if (ev.pulse)
break;
if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2))
break;
data->state = STATE_BIT_PULSE;
return 0;
case STATE_BIT_PULSE:
if (!ev.pulse)
break;
data->bits <<= 1;
if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
data->bits |= 1;
else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
break;
data->count++;
data->state = STATE_BIT_SPACE;
return 0;
case STATE_BIT_SPACE:
if (ev.pulse)
break;
if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2))
break;
decrease_duration(&ev, SONY_BIT_SPACE);
if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) {
data->state = STATE_BIT_PULSE;
return 0;
}
data->state = STATE_FINISHED;
fallthrough;
case STATE_FINISHED:
if (ev.pulse)
break;
if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2))
break;
switch (data->count) {
case 12:
if (!(dev->enabled_protocols & RC_PROTO_BIT_SONY12))
goto finish_state_machine;
device = bitrev8((data->bits << 3) & 0xF8);
subdevice = 0;
function = bitrev8((data->bits >> 4) & 0xFE);
protocol = RC_PROTO_SONY12;
break;
case 15:
if (!(dev->enabled_protocols & RC_PROTO_BIT_SONY15))
goto finish_state_machine;
device = bitrev8((data->bits >> 0) & 0xFF);
subdevice = 0;
function = bitrev8((data->bits >> 7) & 0xFE);
protocol = RC_PROTO_SONY15;
break;
case 20:
if (!(dev->enabled_protocols & RC_PROTO_BIT_SONY20))
goto finish_state_machine;
device = bitrev8((data->bits >> 5) & 0xF8);
subdevice = bitrev8((data->bits >> 0) & 0xFF);
function = bitrev8((data->bits >> 12) & 0xFE);
protocol = RC_PROTO_SONY20;
break;
default:
dev_dbg(&dev->dev, "Sony invalid bitcount %u\n",
data->count);
goto out;
}
scancode = device << 16 | subdevice << 8 | function;
dev_dbg(&dev->dev, "Sony(%u) scancode 0x%05x\n", data->count,
scancode);
rc_keydown(dev, protocol, scancode, 0);
goto finish_state_machine;
}
out:
dev_dbg(&dev->dev, "Sony decode failed at state %d (%uus %s)\n",
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-24 01:23:05 +08:00
data->state, ev.duration, TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
finish_state_machine:
data->state = STATE_INACTIVE;
return 0;
}
static const struct ir_raw_timings_pl ir_sony_timings = {
.header_pulse = SONY_HEADER_PULSE,
.bit_space = SONY_BIT_SPACE,
.bit_pulse[0] = SONY_BIT_0_PULSE,
.bit_pulse[1] = SONY_BIT_1_PULSE,
.trailer_space = SONY_TRAILER_SPACE + SONY_BIT_SPACE,
.msb_first = 0,
};
/**
* ir_sony_encode() - Encode a scancode as a stream of raw events
*
* @protocol: protocol to encode
* @scancode: scancode to encode
* @events: array of raw ir events to write into
* @max: maximum size of @events
*
* Returns: The number of events written.
* -ENOBUFS if there isn't enough space in the array to fit the
* encoding. In this case all @max events will have been written.
*/
static int ir_sony_encode(enum rc_proto protocol, u32 scancode,
struct ir_raw_event *events, unsigned int max)
{
struct ir_raw_event *e = events;
u32 raw, len;
int ret;
if (protocol == RC_PROTO_SONY12) {
raw = (scancode & 0x7f) | ((scancode & 0x1f0000) >> 9);
len = 12;
} else if (protocol == RC_PROTO_SONY15) {
raw = (scancode & 0x7f) | ((scancode & 0xff0000) >> 9);
len = 15;
} else {
raw = (scancode & 0x7f) | ((scancode & 0x1f0000) >> 9) |
((scancode & 0xff00) << 4);
len = 20;
}
ret = ir_raw_gen_pl(&e, max, &ir_sony_timings, len, raw);
if (ret < 0)
return ret;
return e - events;
}
static struct ir_raw_handler sony_handler = {
.protocols = RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 |
RC_PROTO_BIT_SONY20,
.decode = ir_sony_decode,
.encode = ir_sony_encode,
.carrier = 40000,
.min_timeout = SONY_TRAILER_SPACE,
};
static int __init ir_sony_decode_init(void)
{
ir_raw_handler_register(&sony_handler);
printk(KERN_INFO "IR Sony protocol handler initialized\n");
return 0;
}
static void __exit ir_sony_decode_exit(void)
{
ir_raw_handler_unregister(&sony_handler);
}
module_init(ir_sony_decode_init);
module_exit(ir_sony_decode_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
MODULE_DESCRIPTION("Sony IR protocol decoder");