OpenCloudOS-Kernel/drivers/cxl/cxlpci.h

79 lines
2.6 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
#ifndef __CXL_PCI_H__
#define __CXL_PCI_H__
cxl/port: Add a driver for 'struct cxl_port' objects The need for a CXL port driver and a dedicated cxl_bus_type is driven by a need to simultaneously support 2 independent physical memory decode domains (cache coherent CXL.mem and uncached PCI.mmio) that also intersect at a single PCIe device node. A CXL Port is a device that advertises a CXL Component Register block with an "HDM Decoder Capability Structure". >From Documentation/driver-api/cxl/memory-devices.rst: Similar to how a RAID driver takes disk objects and assembles them into a new logical device, the CXL subsystem is tasked to take PCIe and ACPI objects and assemble them into a CXL.mem decode topology. The need for runtime configuration of the CXL.mem topology is also similar to RAID in that different environments with the same hardware configuration may decide to assemble the topology in contrasting ways. One may choose performance (RAID0) striping memory across multiple Host Bridges and endpoints while another may opt for fault tolerance and disable any striping in the CXL.mem topology. The port driver identifies whether an endpoint Memory Expander is connected to a CXL topology. If an active (bound to the 'cxl_port' driver) CXL Port is not found at every PCIe Switch Upstream port and an active "root" CXL Port then the device is just a plain PCIe endpoint only capable of participating in PCI.mmio and DMA cycles, not CXL.mem coherent interleave sets. The 'cxl_port' driver lets the CXL subsystem leverage driver-core infrastructure for setup and teardown of register resources and communicating device activation status to userspace. The cxl_bus_type can rendezvous the async arrival of platform level CXL resources (via the 'cxl_acpi' driver) with the asynchronous enumeration of Memory Expander endpoints, while also implementing a hierarchical locking model independent of the associated 'struct pci_dev' locking model. The locking for dport and decoder enumeration is now handled in the core rather than callers. For now the port driver only enumerates and registers CXL resources (downstream port metadata and decoder resources) later it will be used to take action on its decoders in response to CXL.mem region provisioning requests. Note1: cxlpci.h has long depended on pci.h, but port.c was the first to not include pci.h. Carry that dependency in cxlpci.h. Note2: cxl port enumeration and probing complicates CXL subsystem init to the point that it helps to have centralized debug logging of probe events in cxl_bus_probe(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/164374948116.464348.1772618057599155408.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-02-02 05:07:51 +08:00
#include <linux/pci.h>
#include "cxl.h"
#define CXL_MEMORY_PROGIF 0x10
/*
* See section 8.1 Configuration Space Registers in the CXL 2.0
* Specification. Names are taken straight from the specification with "CXL" and
* "DVSEC" redundancies removed. When obvious, abbreviations may be used.
*/
cxl/mem: Find device capabilities Provide enough functionality to utilize the mailbox of a memory device. The mailbox is used to interact with the firmware running on the memory device. The flow is proven with one implemented command, "identify". Because the class code has already told the driver this is a memory device and the identify command is mandatory. CXL devices contain an array of capabilities that describe the interactions software can have with the device or firmware running on the device. A CXL compliant device must implement the device status and the mailbox capability. Additionally, a CXL compliant memory device must implement the memory device capability. Each of the capabilities can [will] provide an offset within the MMIO region for interacting with the CXL device. The capabilities tell the driver how to find and map the register space for CXL Memory Devices. The registers are required to utilize the CXL spec defined mailbox interface. The spec outlines two mailboxes, primary and secondary. The secondary mailbox is earmarked for system firmware, and not handled in this driver. Primary mailboxes are capable of generating an interrupt when submitting a background command. That implementation is saved for a later time. Reported-by: Colin Ian King <colin.king@canonical.com> (coverity) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch) Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-3-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 12:09:51 +08:00
#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
#define PCI_DVSEC_VENDOR_ID_CXL 0x1E98
/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
#define CXL_DVSEC_PCIE_DEVICE 0
#define CXL_DVSEC_CAP_OFFSET 0xA
#define CXL_DVSEC_MEM_CAPABLE BIT(2)
#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
#define CXL_DVSEC_CTRL_OFFSET 0xC
#define CXL_DVSEC_MEM_ENABLE BIT(2)
#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
#define CXL_DVSEC_MEM_ACTIVE BIT(1)
#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
cxl/mem: Find device capabilities Provide enough functionality to utilize the mailbox of a memory device. The mailbox is used to interact with the firmware running on the memory device. The flow is proven with one implemented command, "identify". Because the class code has already told the driver this is a memory device and the identify command is mandatory. CXL devices contain an array of capabilities that describe the interactions software can have with the device or firmware running on the device. A CXL compliant device must implement the device status and the mailbox capability. Additionally, a CXL compliant memory device must implement the memory device capability. Each of the capabilities can [will] provide an offset within the MMIO region for interacting with the CXL device. The capabilities tell the driver how to find and map the register space for CXL Memory Devices. The registers are required to utilize the CXL spec defined mailbox interface. The spec outlines two mailboxes, primary and secondary. The secondary mailbox is earmarked for system firmware, and not handled in this driver. Primary mailboxes are capable of generating an interrupt when submitting a background command. That implementation is saved for a later time. Reported-by: Colin Ian King <colin.king@canonical.com> (coverity) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch) Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-3-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 12:09:51 +08:00
/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
#define CXL_DVSEC_FUNCTION_MAP 2
/* CXL 2.0 8.1.5: CXL 2.0 Extensions DVSEC for Ports */
#define CXL_DVSEC_PORT_EXTENSIONS 3
/* CXL 2.0 8.1.6: GPF DVSEC for CXL Port */
#define CXL_DVSEC_PORT_GPF 4
/* CXL 2.0 8.1.7: GPF DVSEC for CXL Device */
#define CXL_DVSEC_DEVICE_GPF 5
/* CXL 2.0 8.1.8: PCIe DVSEC for Flex Bus Port */
#define CXL_DVSEC_PCIE_FLEXBUS_PORT 7
/* CXL 2.0 8.1.9: Register Locator DVSEC */
#define CXL_DVSEC_REG_LOCATOR 8
#define CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET 0xC
#define CXL_DVSEC_REG_LOCATOR_BIR_MASK GENMASK(2, 0)
#define CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
#define CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
cxl/mem: Find device capabilities Provide enough functionality to utilize the mailbox of a memory device. The mailbox is used to interact with the firmware running on the memory device. The flow is proven with one implemented command, "identify". Because the class code has already told the driver this is a memory device and the identify command is mandatory. CXL devices contain an array of capabilities that describe the interactions software can have with the device or firmware running on the device. A CXL compliant device must implement the device status and the mailbox capability. Additionally, a CXL compliant memory device must implement the memory device capability. Each of the capabilities can [will] provide an offset within the MMIO region for interacting with the CXL device. The capabilities tell the driver how to find and map the register space for CXL Memory Devices. The registers are required to utilize the CXL spec defined mailbox interface. The spec outlines two mailboxes, primary and secondary. The secondary mailbox is earmarked for system firmware, and not handled in this driver. Primary mailboxes are capable of generating an interrupt when submitting a background command. That implementation is saved for a later time. Reported-by: Colin Ian King <colin.king@canonical.com> (coverity) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch) Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-3-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 12:09:51 +08:00
/* Register Block Identifier (RBI) */
enum cxl_regloc_type {
CXL_REGLOC_RBI_EMPTY = 0,
CXL_REGLOC_RBI_COMPONENT,
CXL_REGLOC_RBI_VIRT,
CXL_REGLOC_RBI_MEMDEV,
CXL_REGLOC_RBI_TYPES
};
cxl/mem: Find device capabilities Provide enough functionality to utilize the mailbox of a memory device. The mailbox is used to interact with the firmware running on the memory device. The flow is proven with one implemented command, "identify". Because the class code has already told the driver this is a memory device and the identify command is mandatory. CXL devices contain an array of capabilities that describe the interactions software can have with the device or firmware running on the device. A CXL compliant device must implement the device status and the mailbox capability. Additionally, a CXL compliant memory device must implement the memory device capability. Each of the capabilities can [will] provide an offset within the MMIO region for interacting with the CXL device. The capabilities tell the driver how to find and map the register space for CXL Memory Devices. The registers are required to utilize the CXL spec defined mailbox interface. The spec outlines two mailboxes, primary and secondary. The secondary mailbox is earmarked for system firmware, and not handled in this driver. Primary mailboxes are capable of generating an interrupt when submitting a background command. That implementation is saved for a later time. Reported-by: Colin Ian King <colin.king@canonical.com> (coverity) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch) Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-3-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 12:09:51 +08:00
static inline resource_size_t cxl_regmap_to_base(struct pci_dev *pdev,
struct cxl_register_map *map)
{
if (map->block_offset == U64_MAX)
return CXL_RESOURCE_NONE;
return pci_resource_start(pdev, map->barno) + map->block_offset;
}
int devm_cxl_port_enumerate_dports(struct cxl_port *port);
struct cxl_dev_state;
int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm);
cxl/port: Read CDAT table The per-device CDAT data provides performance data that is relevant for mapping which CXL devices can participate in which CXL ranges by QTG (QoS Throttling Group) (per ECN: CXL 2.0 CEDT CFMWS & QTG_DSM) [1]. The QTG association specified in the ECN is advisory. Until the cxl_acpi driver grows support for invoking the QTG _DSM method the CDAT data is only of interest to userspace that may need it for debug purposes. Search the DOE mailboxes available, query CDAT data, cache the data and make it available via a sysfs binary attribute per endpoint at: /sys/bus/cxl/devices/endpointX/CDAT ...similar to other ACPI-structured table data in /sys/firmware/ACPI/tables. The CDAT is relative to 'struct cxl_port' objects since switches in addition to endpoints can host a CDAT instance. Switch CDAT support is not implemented. This does not support table updates at runtime. It will always provide whatever was there when first cached. It is also the case that table updates are not expected outside of explicit DPA address map affecting commands like Set Partition with the immediate flag set. Given that the driver does not support Set Partition with the immediate flag set there is no current need for update support. Link: https://www.computeexpresslink.org/spec-landing [1] Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> [djbw: drop in-kernel parsing infra for now, and other minor fixups] Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220719205249.566684-7-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-20 04:52:49 +08:00
void read_cdat_data(struct cxl_port *port);
#endif /* __CXL_PCI_H__ */