License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2008-11-07 04:55:21 +08:00
|
|
|
#ifndef _LINUX_FTRACE_IRQ_H
|
|
|
|
|
#define _LINUX_FTRACE_IRQ_H
|
|
|
|
|
|
2016-08-05 00:49:53 +08:00
|
|
|
#ifdef CONFIG_HWLAT_TRACER
|
|
|
|
|
extern bool trace_hwlat_callback_enabled;
|
|
|
|
|
extern void trace_hwlat_callback(bool enter);
|
|
|
|
|
#endif
|
|
|
|
|
|
trace: Add osnoise tracer
In the context of high-performance computing (HPC), the Operating System
Noise (*osnoise*) refers to the interference experienced by an application
due to activities inside the operating system. In the context of Linux,
NMIs, IRQs, SoftIRQs, and any other system thread can cause noise to the
system. Moreover, hardware-related jobs can also cause noise, for example,
via SMIs.
The osnoise tracer leverages the hwlat_detector by running a similar
loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
the sources of *osnoise* during its execution. Using the same approach
of hwlat, osnoise takes note of the entry and exit point of any
source of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source of
interference. The interference counter for NMI, IRQs, SoftIRQs, and
threads is increased anytime the tool observes these interferences' entry
events. When a noise happens without any interference from the operating
system level, the hardware noise counter increases, pointing to a
hardware-related noise. In this way, osnoise can account for any
source of interference. At the end of the period, the osnoise tracer
prints the sum of all noise, the max single noise, the percentage of CPU
available for the thread, and the counters for the noise sources.
Usage
Write the ASCII text "osnoise" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo osnoise > current_tracer
It is possible to follow the trace by reading the trace trace file::
[root@f32 tracing]# cat trace
# tracer: osnoise
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth MAX
# || / SINGLE Interference counters:
# |||| RUNTIME NOISE % OF CPU NOISE +-----------------------------+
# TASK-PID CPU# |||| TIMESTAMP IN US IN US AVAILABLE IN US HW NMI IRQ SIRQ THREAD
# | | | |||| | | | | | | | | | |
<...>-859 [000] .... 81.637220: 1000000 190 99.98100 9 18 0 1007 18 1
<...>-860 [001] .... 81.638154: 1000000 656 99.93440 74 23 0 1006 16 3
<...>-861 [002] .... 81.638193: 1000000 5675 99.43250 202 6 0 1013 25 21
<...>-862 [003] .... 81.638242: 1000000 125 99.98750 45 1 0 1011 23 0
<...>-863 [004] .... 81.638260: 1000000 1721 99.82790 168 7 0 1002 49 41
<...>-864 [005] .... 81.638286: 1000000 263 99.97370 57 6 0 1006 26 2
<...>-865 [006] .... 81.638302: 1000000 109 99.98910 21 3 0 1006 18 1
<...>-866 [007] .... 81.638326: 1000000 7816 99.21840 107 8 0 1016 39 19
In addition to the regular trace fields (from TASK-PID to TIMESTAMP), the
tracer prints a message at the end of each period for each CPU that is
running an osnoise/CPU thread. The osnoise specific fields report:
- The RUNTIME IN USE reports the amount of time in microseconds that
the osnoise thread kept looping reading the time.
- The NOISE IN US reports the sum of noise in microseconds observed
by the osnoise tracer during the associated runtime.
- The % OF CPU AVAILABLE reports the percentage of CPU available for
the osnoise thread during the runtime window.
- The MAX SINGLE NOISE IN US reports the maximum single noise observed
during the runtime window.
- The Interference counters display how many each of the respective
interference happened during the runtime window.
Note that the example above shows a high number of HW noise samples.
The reason being is that this sample was taken on a virtual machine,
and the host interference is detected as a hardware interference.
Tracer options
The tracer has a set of options inside the osnoise directory, they are:
- osnoise/cpus: CPUs at which a osnoise thread will execute.
- osnoise/period_us: the period of the osnoise thread.
- osnoise/runtime_us: how long an osnoise thread will look for noise.
- osnoise/stop_tracing_us: stop the system tracing if a single noise
higher than the configured value happens. Writing 0 disables this
option.
- osnoise/stop_tracing_total_us: stop the system tracing if total noise
higher than the configured value happens. Writing 0 disables this
option.
- tracing_threshold: the minimum delta between two time() reads to be
considered as noise, in us. When set to 0, the default value will
be used, which is currently 5 us.
Additional Tracing
In addition to the tracer, a set of tracepoints were added to
facilitate the identification of the osnoise source.
- osnoise:sample_threshold: printed anytime a noise is higher than
the configurable tolerance_ns.
- osnoise:nmi_noise: noise from NMI, including the duration.
- osnoise:irq_noise: noise from an IRQ, including the duration.
- osnoise:softirq_noise: noise from a SoftIRQ, including the
duration.
- osnoise:thread_noise: noise from a thread, including the duration.
Note that all the values are *net values*. For example, if while osnoise
is running, another thread preempts the osnoise thread, it will start a
thread_noise duration at the start. Then, an IRQ takes place, preempting
the thread_noise, starting a irq_noise. When the IRQ ends its execution,
it will compute its duration, and this duration will be subtracted from
the thread_noise, in such a way as to avoid the double accounting of the
IRQ execution. This logic is valid for all sources of noise.
Here is one example of the usage of these tracepoints::
osnoise/8-961 [008] d.h. 5789.857532: irq_noise: local_timer:236 start 5789.857529929 duration 1845 ns
osnoise/8-961 [008] dNh. 5789.858408: irq_noise: local_timer:236 start 5789.858404871 duration 2848 ns
migration/8-54 [008] d... 5789.858413: thread_noise: migration/8:54 start 5789.858409300 duration 3068 ns
osnoise/8-961 [008] .... 5789.858413: sample_threshold: start 5789.858404555 duration 8723 ns interferences 2
In this example, a noise sample of 8 microseconds was reported in the last
line, pointing to two interferences. Looking backward in the trace, the
two previous entries were about the migration thread running after a
timer IRQ execution. The first event is not part of the noise because
it took place one millisecond before.
It is worth noticing that the sum of the duration reported in the
tracepoints is smaller than eight us reported in the sample_threshold.
The reason roots in the overhead of the entry and exit code that happens
before and after any interference execution. This justifies the dual
approach: measuring thread and tracing.
Link: https://lkml.kernel.org/r/e649467042d60e7b62714c9c6751a56299d15119.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
[
Made the following functions static:
trace_irqentry_callback()
trace_irqexit_callback()
trace_intel_irqentry_callback()
trace_intel_irqexit_callback()
Added to include/trace.h:
osnoise_arch_register()
osnoise_arch_unregister()
Fixed define logic for LATENCY_FS_NOTIFY
Reported-by: kernel test robot <lkp@intel.com>
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-22 22:42:27 +08:00
|
|
|
#ifdef CONFIG_OSNOISE_TRACER
|
|
|
|
|
extern bool trace_osnoise_callback_enabled;
|
|
|
|
|
extern void trace_osnoise_callback(bool enter);
|
|
|
|
|
#endif
|
|
|
|
|
|
2016-08-05 00:49:53 +08:00
|
|
|
static inline void ftrace_nmi_enter(void)
|
|
|
|
|
{
|
|
|
|
|
#ifdef CONFIG_HWLAT_TRACER
|
|
|
|
|
if (trace_hwlat_callback_enabled)
|
|
|
|
|
trace_hwlat_callback(true);
|
|
|
|
|
#endif
|
trace: Add osnoise tracer
In the context of high-performance computing (HPC), the Operating System
Noise (*osnoise*) refers to the interference experienced by an application
due to activities inside the operating system. In the context of Linux,
NMIs, IRQs, SoftIRQs, and any other system thread can cause noise to the
system. Moreover, hardware-related jobs can also cause noise, for example,
via SMIs.
The osnoise tracer leverages the hwlat_detector by running a similar
loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
the sources of *osnoise* during its execution. Using the same approach
of hwlat, osnoise takes note of the entry and exit point of any
source of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source of
interference. The interference counter for NMI, IRQs, SoftIRQs, and
threads is increased anytime the tool observes these interferences' entry
events. When a noise happens without any interference from the operating
system level, the hardware noise counter increases, pointing to a
hardware-related noise. In this way, osnoise can account for any
source of interference. At the end of the period, the osnoise tracer
prints the sum of all noise, the max single noise, the percentage of CPU
available for the thread, and the counters for the noise sources.
Usage
Write the ASCII text "osnoise" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo osnoise > current_tracer
It is possible to follow the trace by reading the trace trace file::
[root@f32 tracing]# cat trace
# tracer: osnoise
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth MAX
# || / SINGLE Interference counters:
# |||| RUNTIME NOISE % OF CPU NOISE +-----------------------------+
# TASK-PID CPU# |||| TIMESTAMP IN US IN US AVAILABLE IN US HW NMI IRQ SIRQ THREAD
# | | | |||| | | | | | | | | | |
<...>-859 [000] .... 81.637220: 1000000 190 99.98100 9 18 0 1007 18 1
<...>-860 [001] .... 81.638154: 1000000 656 99.93440 74 23 0 1006 16 3
<...>-861 [002] .... 81.638193: 1000000 5675 99.43250 202 6 0 1013 25 21
<...>-862 [003] .... 81.638242: 1000000 125 99.98750 45 1 0 1011 23 0
<...>-863 [004] .... 81.638260: 1000000 1721 99.82790 168 7 0 1002 49 41
<...>-864 [005] .... 81.638286: 1000000 263 99.97370 57 6 0 1006 26 2
<...>-865 [006] .... 81.638302: 1000000 109 99.98910 21 3 0 1006 18 1
<...>-866 [007] .... 81.638326: 1000000 7816 99.21840 107 8 0 1016 39 19
In addition to the regular trace fields (from TASK-PID to TIMESTAMP), the
tracer prints a message at the end of each period for each CPU that is
running an osnoise/CPU thread. The osnoise specific fields report:
- The RUNTIME IN USE reports the amount of time in microseconds that
the osnoise thread kept looping reading the time.
- The NOISE IN US reports the sum of noise in microseconds observed
by the osnoise tracer during the associated runtime.
- The % OF CPU AVAILABLE reports the percentage of CPU available for
the osnoise thread during the runtime window.
- The MAX SINGLE NOISE IN US reports the maximum single noise observed
during the runtime window.
- The Interference counters display how many each of the respective
interference happened during the runtime window.
Note that the example above shows a high number of HW noise samples.
The reason being is that this sample was taken on a virtual machine,
and the host interference is detected as a hardware interference.
Tracer options
The tracer has a set of options inside the osnoise directory, they are:
- osnoise/cpus: CPUs at which a osnoise thread will execute.
- osnoise/period_us: the period of the osnoise thread.
- osnoise/runtime_us: how long an osnoise thread will look for noise.
- osnoise/stop_tracing_us: stop the system tracing if a single noise
higher than the configured value happens. Writing 0 disables this
option.
- osnoise/stop_tracing_total_us: stop the system tracing if total noise
higher than the configured value happens. Writing 0 disables this
option.
- tracing_threshold: the minimum delta between two time() reads to be
considered as noise, in us. When set to 0, the default value will
be used, which is currently 5 us.
Additional Tracing
In addition to the tracer, a set of tracepoints were added to
facilitate the identification of the osnoise source.
- osnoise:sample_threshold: printed anytime a noise is higher than
the configurable tolerance_ns.
- osnoise:nmi_noise: noise from NMI, including the duration.
- osnoise:irq_noise: noise from an IRQ, including the duration.
- osnoise:softirq_noise: noise from a SoftIRQ, including the
duration.
- osnoise:thread_noise: noise from a thread, including the duration.
Note that all the values are *net values*. For example, if while osnoise
is running, another thread preempts the osnoise thread, it will start a
thread_noise duration at the start. Then, an IRQ takes place, preempting
the thread_noise, starting a irq_noise. When the IRQ ends its execution,
it will compute its duration, and this duration will be subtracted from
the thread_noise, in such a way as to avoid the double accounting of the
IRQ execution. This logic is valid for all sources of noise.
Here is one example of the usage of these tracepoints::
osnoise/8-961 [008] d.h. 5789.857532: irq_noise: local_timer:236 start 5789.857529929 duration 1845 ns
osnoise/8-961 [008] dNh. 5789.858408: irq_noise: local_timer:236 start 5789.858404871 duration 2848 ns
migration/8-54 [008] d... 5789.858413: thread_noise: migration/8:54 start 5789.858409300 duration 3068 ns
osnoise/8-961 [008] .... 5789.858413: sample_threshold: start 5789.858404555 duration 8723 ns interferences 2
In this example, a noise sample of 8 microseconds was reported in the last
line, pointing to two interferences. Looking backward in the trace, the
two previous entries were about the migration thread running after a
timer IRQ execution. The first event is not part of the noise because
it took place one millisecond before.
It is worth noticing that the sum of the duration reported in the
tracepoints is smaller than eight us reported in the sample_threshold.
The reason roots in the overhead of the entry and exit code that happens
before and after any interference execution. This justifies the dual
approach: measuring thread and tracing.
Link: https://lkml.kernel.org/r/e649467042d60e7b62714c9c6751a56299d15119.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
[
Made the following functions static:
trace_irqentry_callback()
trace_irqexit_callback()
trace_intel_irqentry_callback()
trace_intel_irqexit_callback()
Added to include/trace.h:
osnoise_arch_register()
osnoise_arch_unregister()
Fixed define logic for LATENCY_FS_NOTIFY
Reported-by: kernel test robot <lkp@intel.com>
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-22 22:42:27 +08:00
|
|
|
#ifdef CONFIG_OSNOISE_TRACER
|
|
|
|
|
if (trace_osnoise_callback_enabled)
|
|
|
|
|
trace_osnoise_callback(true);
|
|
|
|
|
#endif
|
2016-08-05 00:49:53 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void ftrace_nmi_exit(void)
|
|
|
|
|
{
|
|
|
|
|
#ifdef CONFIG_HWLAT_TRACER
|
|
|
|
|
if (trace_hwlat_callback_enabled)
|
|
|
|
|
trace_hwlat_callback(false);
|
|
|
|
|
#endif
|
trace: Add osnoise tracer
In the context of high-performance computing (HPC), the Operating System
Noise (*osnoise*) refers to the interference experienced by an application
due to activities inside the operating system. In the context of Linux,
NMIs, IRQs, SoftIRQs, and any other system thread can cause noise to the
system. Moreover, hardware-related jobs can also cause noise, for example,
via SMIs.
The osnoise tracer leverages the hwlat_detector by running a similar
loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
the sources of *osnoise* during its execution. Using the same approach
of hwlat, osnoise takes note of the entry and exit point of any
source of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source of
interference. The interference counter for NMI, IRQs, SoftIRQs, and
threads is increased anytime the tool observes these interferences' entry
events. When a noise happens without any interference from the operating
system level, the hardware noise counter increases, pointing to a
hardware-related noise. In this way, osnoise can account for any
source of interference. At the end of the period, the osnoise tracer
prints the sum of all noise, the max single noise, the percentage of CPU
available for the thread, and the counters for the noise sources.
Usage
Write the ASCII text "osnoise" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo osnoise > current_tracer
It is possible to follow the trace by reading the trace trace file::
[root@f32 tracing]# cat trace
# tracer: osnoise
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth MAX
# || / SINGLE Interference counters:
# |||| RUNTIME NOISE % OF CPU NOISE +-----------------------------+
# TASK-PID CPU# |||| TIMESTAMP IN US IN US AVAILABLE IN US HW NMI IRQ SIRQ THREAD
# | | | |||| | | | | | | | | | |
<...>-859 [000] .... 81.637220: 1000000 190 99.98100 9 18 0 1007 18 1
<...>-860 [001] .... 81.638154: 1000000 656 99.93440 74 23 0 1006 16 3
<...>-861 [002] .... 81.638193: 1000000 5675 99.43250 202 6 0 1013 25 21
<...>-862 [003] .... 81.638242: 1000000 125 99.98750 45 1 0 1011 23 0
<...>-863 [004] .... 81.638260: 1000000 1721 99.82790 168 7 0 1002 49 41
<...>-864 [005] .... 81.638286: 1000000 263 99.97370 57 6 0 1006 26 2
<...>-865 [006] .... 81.638302: 1000000 109 99.98910 21 3 0 1006 18 1
<...>-866 [007] .... 81.638326: 1000000 7816 99.21840 107 8 0 1016 39 19
In addition to the regular trace fields (from TASK-PID to TIMESTAMP), the
tracer prints a message at the end of each period for each CPU that is
running an osnoise/CPU thread. The osnoise specific fields report:
- The RUNTIME IN USE reports the amount of time in microseconds that
the osnoise thread kept looping reading the time.
- The NOISE IN US reports the sum of noise in microseconds observed
by the osnoise tracer during the associated runtime.
- The % OF CPU AVAILABLE reports the percentage of CPU available for
the osnoise thread during the runtime window.
- The MAX SINGLE NOISE IN US reports the maximum single noise observed
during the runtime window.
- The Interference counters display how many each of the respective
interference happened during the runtime window.
Note that the example above shows a high number of HW noise samples.
The reason being is that this sample was taken on a virtual machine,
and the host interference is detected as a hardware interference.
Tracer options
The tracer has a set of options inside the osnoise directory, they are:
- osnoise/cpus: CPUs at which a osnoise thread will execute.
- osnoise/period_us: the period of the osnoise thread.
- osnoise/runtime_us: how long an osnoise thread will look for noise.
- osnoise/stop_tracing_us: stop the system tracing if a single noise
higher than the configured value happens. Writing 0 disables this
option.
- osnoise/stop_tracing_total_us: stop the system tracing if total noise
higher than the configured value happens. Writing 0 disables this
option.
- tracing_threshold: the minimum delta between two time() reads to be
considered as noise, in us. When set to 0, the default value will
be used, which is currently 5 us.
Additional Tracing
In addition to the tracer, a set of tracepoints were added to
facilitate the identification of the osnoise source.
- osnoise:sample_threshold: printed anytime a noise is higher than
the configurable tolerance_ns.
- osnoise:nmi_noise: noise from NMI, including the duration.
- osnoise:irq_noise: noise from an IRQ, including the duration.
- osnoise:softirq_noise: noise from a SoftIRQ, including the
duration.
- osnoise:thread_noise: noise from a thread, including the duration.
Note that all the values are *net values*. For example, if while osnoise
is running, another thread preempts the osnoise thread, it will start a
thread_noise duration at the start. Then, an IRQ takes place, preempting
the thread_noise, starting a irq_noise. When the IRQ ends its execution,
it will compute its duration, and this duration will be subtracted from
the thread_noise, in such a way as to avoid the double accounting of the
IRQ execution. This logic is valid for all sources of noise.
Here is one example of the usage of these tracepoints::
osnoise/8-961 [008] d.h. 5789.857532: irq_noise: local_timer:236 start 5789.857529929 duration 1845 ns
osnoise/8-961 [008] dNh. 5789.858408: irq_noise: local_timer:236 start 5789.858404871 duration 2848 ns
migration/8-54 [008] d... 5789.858413: thread_noise: migration/8:54 start 5789.858409300 duration 3068 ns
osnoise/8-961 [008] .... 5789.858413: sample_threshold: start 5789.858404555 duration 8723 ns interferences 2
In this example, a noise sample of 8 microseconds was reported in the last
line, pointing to two interferences. Looking backward in the trace, the
two previous entries were about the migration thread running after a
timer IRQ execution. The first event is not part of the noise because
it took place one millisecond before.
It is worth noticing that the sum of the duration reported in the
tracepoints is smaller than eight us reported in the sample_threshold.
The reason roots in the overhead of the entry and exit code that happens
before and after any interference execution. This justifies the dual
approach: measuring thread and tracing.
Link: https://lkml.kernel.org/r/e649467042d60e7b62714c9c6751a56299d15119.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
[
Made the following functions static:
trace_irqentry_callback()
trace_irqexit_callback()
trace_intel_irqentry_callback()
trace_intel_irqexit_callback()
Added to include/trace.h:
osnoise_arch_register()
osnoise_arch_unregister()
Fixed define logic for LATENCY_FS_NOTIFY
Reported-by: kernel test robot <lkp@intel.com>
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-22 22:42:27 +08:00
|
|
|
#ifdef CONFIG_OSNOISE_TRACER
|
|
|
|
|
if (trace_osnoise_callback_enabled)
|
|
|
|
|
trace_osnoise_callback(false);
|
|
|
|
|
#endif
|
2016-08-05 00:49:53 +08:00
|
|
|
}
|
|
|
|
|
|
2008-11-07 04:55:21 +08:00
|
|
|
#endif /* _LINUX_FTRACE_IRQ_H */
|