OpenCloudOS-Kernel/fs/xfs/xfs_itable.c

707 lines
19 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_inum.h"
#include "xfs_sb.h"
#include "xfs_ag.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_btree.h"
#include "xfs_ialloc.h"
#include "xfs_ialloc_btree.h"
#include "xfs_itable.h"
#include "xfs_error.h"
#include "xfs_trace.h"
#include "xfs_icache.h"
#include "xfs_dinode.h"
STATIC int
xfs_internal_inum(
xfs_mount_t *mp,
xfs_ino_t ino)
{
return (ino == mp->m_sb.sb_rbmino || ino == mp->m_sb.sb_rsumino ||
(xfs_sb_version_hasquota(&mp->m_sb) &&
xfs_is_quota_inode(&mp->m_sb, ino)));
}
/*
* Return stat information for one inode.
* Return 0 if ok, else errno.
*/
int
xfs_bulkstat_one_int(
struct xfs_mount *mp, /* mount point for filesystem */
xfs_ino_t ino, /* inode to get data for */
void __user *buffer, /* buffer to place output in */
int ubsize, /* size of buffer */
bulkstat_one_fmt_pf formatter, /* formatter, copy to user */
int *ubused, /* bytes used by me */
int *stat) /* BULKSTAT_RV_... */
{
struct xfs_icdinode *dic; /* dinode core info pointer */
struct xfs_inode *ip; /* incore inode pointer */
struct xfs_bstat *buf; /* return buffer */
int error = 0; /* error value */
*stat = BULKSTAT_RV_NOTHING;
if (!buffer || xfs_internal_inum(mp, ino))
return XFS_ERROR(EINVAL);
buf = kmem_alloc(sizeof(*buf), KM_SLEEP | KM_MAYFAIL);
if (!buf)
return XFS_ERROR(ENOMEM);
error = xfs_iget(mp, NULL, ino,
(XFS_IGET_DONTCACHE | XFS_IGET_UNTRUSTED),
XFS_ILOCK_SHARED, &ip);
if (error) {
*stat = BULKSTAT_RV_NOTHING;
goto out_free;
}
ASSERT(ip != NULL);
ASSERT(ip->i_imap.im_blkno != 0);
dic = &ip->i_d;
/* xfs_iget returns the following without needing
* further change.
*/
buf->bs_nlink = dic->di_nlink;
buf->bs_projid_lo = dic->di_projid_lo;
buf->bs_projid_hi = dic->di_projid_hi;
buf->bs_ino = ino;
buf->bs_mode = dic->di_mode;
buf->bs_uid = dic->di_uid;
buf->bs_gid = dic->di_gid;
buf->bs_size = dic->di_size;
buf->bs_atime.tv_sec = dic->di_atime.t_sec;
buf->bs_atime.tv_nsec = dic->di_atime.t_nsec;
buf->bs_mtime.tv_sec = dic->di_mtime.t_sec;
buf->bs_mtime.tv_nsec = dic->di_mtime.t_nsec;
buf->bs_ctime.tv_sec = dic->di_ctime.t_sec;
buf->bs_ctime.tv_nsec = dic->di_ctime.t_nsec;
buf->bs_xflags = xfs_ip2xflags(ip);
buf->bs_extsize = dic->di_extsize << mp->m_sb.sb_blocklog;
buf->bs_extents = dic->di_nextents;
buf->bs_gen = dic->di_gen;
memset(buf->bs_pad, 0, sizeof(buf->bs_pad));
buf->bs_dmevmask = dic->di_dmevmask;
buf->bs_dmstate = dic->di_dmstate;
buf->bs_aextents = dic->di_anextents;
buf->bs_forkoff = XFS_IFORK_BOFF(ip);
switch (dic->di_format) {
case XFS_DINODE_FMT_DEV:
buf->bs_rdev = ip->i_df.if_u2.if_rdev;
buf->bs_blksize = BLKDEV_IOSIZE;
buf->bs_blocks = 0;
break;
case XFS_DINODE_FMT_LOCAL:
case XFS_DINODE_FMT_UUID:
buf->bs_rdev = 0;
buf->bs_blksize = mp->m_sb.sb_blocksize;
buf->bs_blocks = 0;
break;
case XFS_DINODE_FMT_EXTENTS:
case XFS_DINODE_FMT_BTREE:
buf->bs_rdev = 0;
buf->bs_blksize = mp->m_sb.sb_blocksize;
buf->bs_blocks = dic->di_nblocks + ip->i_delayed_blks;
break;
}
xfs_iunlock(ip, XFS_ILOCK_SHARED);
IRELE(ip);
error = formatter(buffer, ubsize, ubused, buf);
if (!error)
*stat = BULKSTAT_RV_DIDONE;
out_free:
kmem_free(buf);
return error;
}
/* Return 0 on success or positive error */
STATIC int
xfs_bulkstat_one_fmt(
void __user *ubuffer,
int ubsize,
int *ubused,
const xfs_bstat_t *buffer)
{
if (ubsize < sizeof(*buffer))
return XFS_ERROR(ENOMEM);
if (copy_to_user(ubuffer, buffer, sizeof(*buffer)))
return XFS_ERROR(EFAULT);
if (ubused)
*ubused = sizeof(*buffer);
return 0;
}
int
xfs_bulkstat_one(
xfs_mount_t *mp, /* mount point for filesystem */
xfs_ino_t ino, /* inode number to get data for */
void __user *buffer, /* buffer to place output in */
int ubsize, /* size of buffer */
int *ubused, /* bytes used by me */
int *stat) /* BULKSTAT_RV_... */
{
return xfs_bulkstat_one_int(mp, ino, buffer, ubsize,
xfs_bulkstat_one_fmt, ubused, stat);
}
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
#define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size)
/*
* Return stat information in bulk (by-inode) for the filesystem.
*/
int /* error status */
xfs_bulkstat(
xfs_mount_t *mp, /* mount point for filesystem */
xfs_ino_t *lastinop, /* last inode returned */
int *ubcountp, /* size of buffer/count returned */
bulkstat_one_pf formatter, /* func that'd fill a single buf */
size_t statstruct_size, /* sizeof struct filling */
char __user *ubuffer, /* buffer with inode stats */
int *done) /* 1 if there are more stats to get */
{
xfs_agblock_t agbno=0;/* allocation group block number */
xfs_buf_t *agbp; /* agi header buffer */
xfs_agi_t *agi; /* agi header data */
xfs_agino_t agino; /* inode # in allocation group */
xfs_agnumber_t agno; /* allocation group number */
int chunkidx; /* current index into inode chunk */
int clustidx; /* current index into inode cluster */
xfs_btree_cur_t *cur; /* btree cursor for ialloc btree */
int end_of_ag; /* set if we've seen the ag end */
int error; /* error code */
int fmterror;/* bulkstat formatter result */
int i; /* loop index */
int icount; /* count of inodes good in irbuf */
size_t irbsize; /* size of irec buffer in bytes */
xfs_ino_t ino; /* inode number (filesystem) */
xfs_inobt_rec_incore_t *irbp; /* current irec buffer pointer */
xfs_inobt_rec_incore_t *irbuf; /* start of irec buffer */
xfs_inobt_rec_incore_t *irbufend; /* end of good irec buffer entries */
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
xfs_ino_t lastino; /* last inode number returned */
int nbcluster; /* # of blocks in a cluster */
int nicluster; /* # of inodes in a cluster */
int nimask; /* mask for inode clusters */
int nirbuf; /* size of irbuf */
int rval; /* return value error code */
int tmp; /* result value from btree calls */
int ubcount; /* size of user's buffer */
int ubleft; /* bytes left in user's buffer */
char __user *ubufp; /* pointer into user's buffer */
int ubelem; /* spaces used in user's buffer */
int ubused; /* bytes used by formatter */
/*
* Get the last inode value, see if there's nothing to do.
*/
ino = (xfs_ino_t)*lastinop;
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
lastino = ino;
agno = XFS_INO_TO_AGNO(mp, ino);
agino = XFS_INO_TO_AGINO(mp, ino);
if (agno >= mp->m_sb.sb_agcount ||
ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
*done = 1;
*ubcountp = 0;
return 0;
}
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
if (!ubcountp || *ubcountp <= 0) {
return EINVAL;
}
ubcount = *ubcountp; /* statstruct's */
ubleft = ubcount * statstruct_size; /* bytes */
*ubcountp = ubelem = 0;
*done = 0;
fmterror = 0;
ubufp = ubuffer;
nicluster = mp->m_sb.sb_blocksize >= mp->m_inode_cluster_size ?
mp->m_sb.sb_inopblock :
(mp->m_inode_cluster_size >> mp->m_sb.sb_inodelog);
nimask = ~(nicluster - 1);
nbcluster = nicluster >> mp->m_sb.sb_inopblog;
irbuf = kmem_zalloc_greedy(&irbsize, PAGE_SIZE, PAGE_SIZE * 4);
if (!irbuf)
return ENOMEM;
nirbuf = irbsize / sizeof(*irbuf);
/*
* Loop over the allocation groups, starting from the last
* inode returned; 0 means start of the allocation group.
*/
rval = 0;
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
while (XFS_BULKSTAT_UBLEFT(ubleft) && agno < mp->m_sb.sb_agcount) {
cond_resched();
error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp);
if (error) {
/*
* Skip this allocation group and go to the next one.
*/
agno++;
agino = 0;
continue;
}
agi = XFS_BUF_TO_AGI(agbp);
/*
* Allocate and initialize a btree cursor for ialloc btree.
*/
cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno);
irbp = irbuf;
irbufend = irbuf + nirbuf;
end_of_ag = 0;
/*
* If we're returning in the middle of an allocation group,
* we need to get the remainder of the chunk we're in.
*/
if (agino > 0) {
xfs_inobt_rec_incore_t r;
/*
* Lookup the inode chunk that this inode lives in.
*/
error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE,
&tmp);
if (!error && /* no I/O error */
tmp && /* lookup succeeded */
/* got the record, should always work */
!(error = xfs_inobt_get_rec(cur, &r, &i)) &&
i == 1 &&
/* this is the right chunk */
agino < r.ir_startino + XFS_INODES_PER_CHUNK &&
/* lastino was not last in chunk */
(chunkidx = agino - r.ir_startino + 1) <
XFS_INODES_PER_CHUNK &&
/* there are some left allocated */
xfs_inobt_maskn(chunkidx,
XFS_INODES_PER_CHUNK - chunkidx) &
~r.ir_free) {
/*
* Grab the chunk record. Mark all the
* uninteresting inodes (because they're
* before our start point) free.
*/
for (i = 0; i < chunkidx; i++) {
if (XFS_INOBT_MASK(i) & ~r.ir_free)
r.ir_freecount++;
}
r.ir_free |= xfs_inobt_maskn(0, chunkidx);
irbp->ir_startino = r.ir_startino;
irbp->ir_freecount = r.ir_freecount;
irbp->ir_free = r.ir_free;
irbp++;
agino = r.ir_startino + XFS_INODES_PER_CHUNK;
icount = XFS_INODES_PER_CHUNK - r.ir_freecount;
} else {
/*
* If any of those tests failed, bump the
* inode number (just in case).
*/
agino++;
icount = 0;
}
/*
* In any case, increment to the next record.
*/
if (!error)
error = xfs_btree_increment(cur, 0, &tmp);
} else {
/*
* Start of ag. Lookup the first inode chunk.
*/
error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &tmp);
icount = 0;
}
/*
* Loop through inode btree records in this ag,
* until we run out of inodes or space in the buffer.
*/
while (irbp < irbufend && icount < ubcount) {
xfs_inobt_rec_incore_t r;
/*
* Loop as long as we're unable to read the
* inode btree.
*/
while (error) {
agino += XFS_INODES_PER_CHUNK;
if (XFS_AGINO_TO_AGBNO(mp, agino) >=
be32_to_cpu(agi->agi_length))
break;
error = xfs_inobt_lookup(cur, agino,
XFS_LOOKUP_GE, &tmp);
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
cond_resched();
}
/*
* If ran off the end of the ag either with an error,
* or the normal way, set end and stop collecting.
*/
if (error) {
end_of_ag = 1;
break;
}
error = xfs_inobt_get_rec(cur, &r, &i);
if (error || i == 0) {
end_of_ag = 1;
break;
}
/*
* If this chunk has any allocated inodes, save it.
* Also start read-ahead now for this chunk.
*/
if (r.ir_freecount < XFS_INODES_PER_CHUNK) {
struct blk_plug plug;
/*
* Loop over all clusters in the next chunk.
* Do a readahead if there are any allocated
* inodes in that cluster.
*/
blk_start_plug(&plug);
agbno = XFS_AGINO_TO_AGBNO(mp, r.ir_startino);
for (chunkidx = 0;
chunkidx < XFS_INODES_PER_CHUNK;
chunkidx += nicluster,
agbno += nbcluster) {
if (xfs_inobt_maskn(chunkidx, nicluster)
& ~r.ir_free)
xfs_btree_reada_bufs(mp, agno,
agbno, nbcluster,
&xfs_inode_buf_ops);
}
blk_finish_plug(&plug);
irbp->ir_startino = r.ir_startino;
irbp->ir_freecount = r.ir_freecount;
irbp->ir_free = r.ir_free;
irbp++;
icount += XFS_INODES_PER_CHUNK - r.ir_freecount;
}
/*
* Set agino to after this chunk and bump the cursor.
*/
agino = r.ir_startino + XFS_INODES_PER_CHUNK;
error = xfs_btree_increment(cur, 0, &tmp);
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
cond_resched();
}
/*
* Drop the btree buffers and the agi buffer.
* We can't hold any of the locks these represent
* when calling iget.
*/
xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
xfs_buf_relse(agbp);
/*
* Now format all the good inodes into the user's buffer.
*/
irbufend = irbp;
for (irbp = irbuf;
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
irbp < irbufend && XFS_BULKSTAT_UBLEFT(ubleft); irbp++) {
/*
* Now process this chunk of inodes.
*/
for (agino = irbp->ir_startino, chunkidx = clustidx = 0;
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
XFS_BULKSTAT_UBLEFT(ubleft) &&
irbp->ir_freecount < XFS_INODES_PER_CHUNK;
chunkidx++, clustidx++, agino++) {
ASSERT(chunkidx < XFS_INODES_PER_CHUNK);
ino = XFS_AGINO_TO_INO(mp, agno, agino);
/*
* Skip if this inode is free.
*/
if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free) {
lastino = ino;
continue;
}
/*
* Count used inodes as free so we can tell
* when the chunk is used up.
*/
irbp->ir_freecount++;
/*
* Get the inode and fill in a single buffer.
*/
ubused = statstruct_size;
error = formatter(mp, ino, ubufp, ubleft,
&ubused, &fmterror);
if (fmterror == BULKSTAT_RV_NOTHING) {
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
if (error && error != ENOENT &&
error != EINVAL) {
ubleft = 0;
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
rval = error;
break;
}
lastino = ino;
continue;
}
if (fmterror == BULKSTAT_RV_GIVEUP) {
ubleft = 0;
ASSERT(error);
rval = error;
break;
}
if (ubufp)
ubufp += ubused;
ubleft -= ubused;
ubelem++;
lastino = ino;
}
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
cond_resched();
}
/*
* Set up for the next loop iteration.
*/
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
if (XFS_BULKSTAT_UBLEFT(ubleft)) {
if (end_of_ag) {
agno++;
agino = 0;
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
} else
agino = XFS_INO_TO_AGINO(mp, lastino);
} else
break;
}
/*
* Done, we're either out of filesystem or space to put the data.
*/
kmem_free(irbuf);
*ubcountp = ubelem;
[XFS] 971064 Various fixups for xfs_bulkstat(). - sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]() - remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This special case causes bulkstat to fail because the special case uses xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions have different semantics. xfs_bulkstat() will return the next inode after the one supplied while skipping internal inodes (ie quota inodes). xfs_bulkstate_single() will only lookup the inode supplied and return an error if it is an internal inode. - in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied so in cases were we return without examining any inodes the scan wont restart back at zero. - sanity check for valid *ubcountp values. Cannot sanity check for valid ubuffer here because some users of xfs_bulkstat() don't supply a buffer. - checks against 'ubleft' (the space left in the user's buffer) should be against 'statstruct_size' which is the supplied minimum object size. The mixture of checks against statstruct_size and 0 was one of the reasons we were skipping inodes. - if the formatter function returns BULKSTAT_RV_NOTHING and an error and the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT is for inodes that are no longer valid and we just skip them. EINVAL is returned if we try to lookup an internal inode so we skip them too. For a DMF scan if the inode and DMF attribute cannot fit into the space left in the user's buffer it would return ERANGE. We didn't handle this error and skipped the inode. We would continue to skip inodes until one fitted into the user's buffer or we completed the scan. - put back the recalculation of agino (that got removed with the last fix) at the end of the while loop. This is because the code at the start of the loop expects agino to be the last inode examined if it is non-zero. - if we found some inodes but then encountered an error, return success this time and the error next time. If the formatter aborted with ENOMEM we will now return this error but only if we couldn't read any inodes. Previously if we encountered ENOMEM without reading any inodes we returned a zero count and no error which falsely indicated the scan was complete. SGI-PV: 973431 SGI-Modid: xfs-linux-melb:xfs-kern:30089a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2007-11-23 13:30:32 +08:00
/*
* Found some inodes, return them now and return the error next time.
*/
if (ubelem)
rval = 0;
if (agno >= mp->m_sb.sb_agcount) {
/*
* If we ran out of filesystem, mark lastino as off
* the end of the filesystem, so the next call
* will return immediately.
*/
*lastinop = (xfs_ino_t)XFS_AGINO_TO_INO(mp, agno, 0);
*done = 1;
} else
*lastinop = (xfs_ino_t)lastino;
return rval;
}
/*
* Return stat information in bulk (by-inode) for the filesystem.
* Special case for non-sequential one inode bulkstat.
*/
int /* error status */
xfs_bulkstat_single(
xfs_mount_t *mp, /* mount point for filesystem */
xfs_ino_t *lastinop, /* inode to return */
char __user *buffer, /* buffer with inode stats */
int *done) /* 1 if there are more stats to get */
{
int count; /* count value for bulkstat call */
int error; /* return value */
xfs_ino_t ino; /* filesystem inode number */
int res; /* result from bs1 */
/*
* note that requesting valid inode numbers which are not allocated
* to inodes will most likely cause xfs_imap_to_bp to generate warning
* messages about bad magic numbers. This is ok. The fact that
* the inode isn't actually an inode is handled by the
* error check below. Done this way to make the usual case faster
* at the expense of the error case.
*/
ino = *lastinop;
error = xfs_bulkstat_one(mp, ino, buffer, sizeof(xfs_bstat_t),
NULL, &res);
if (error) {
/*
* Special case way failed, do it the "long" way
* to see if that works.
*/
(*lastinop)--;
count = 1;
if (xfs_bulkstat(mp, lastinop, &count, xfs_bulkstat_one,
sizeof(xfs_bstat_t), buffer, done))
return error;
if (count == 0 || (xfs_ino_t)*lastinop != ino)
return error == EFSCORRUPTED ?
XFS_ERROR(EINVAL) : error;
else
return 0;
}
*done = 0;
return 0;
}
int
xfs_inumbers_fmt(
void __user *ubuffer, /* buffer to write to */
const xfs_inogrp_t *buffer, /* buffer to read from */
long count, /* # of elements to read */
long *written) /* # of bytes written */
{
if (copy_to_user(ubuffer, buffer, count * sizeof(*buffer)))
return -EFAULT;
*written = count * sizeof(*buffer);
return 0;
}
/*
* Return inode number table for the filesystem.
*/
int /* error status */
xfs_inumbers(
xfs_mount_t *mp, /* mount point for filesystem */
xfs_ino_t *lastino, /* last inode returned */
int *count, /* size of buffer/count returned */
void __user *ubuffer,/* buffer with inode descriptions */
inumbers_fmt_pf formatter)
{
xfs_buf_t *agbp;
xfs_agino_t agino;
xfs_agnumber_t agno;
int bcount;
xfs_inogrp_t *buffer;
int bufidx;
xfs_btree_cur_t *cur;
int error;
xfs_inobt_rec_incore_t r;
int i;
xfs_ino_t ino;
int left;
int tmp;
ino = (xfs_ino_t)*lastino;
agno = XFS_INO_TO_AGNO(mp, ino);
agino = XFS_INO_TO_AGINO(mp, ino);
left = *count;
*count = 0;
bcount = MIN(left, (int)(PAGE_SIZE / sizeof(*buffer)));
buffer = kmem_alloc(bcount * sizeof(*buffer), KM_SLEEP);
error = bufidx = 0;
cur = NULL;
agbp = NULL;
while (left > 0 && agno < mp->m_sb.sb_agcount) {
if (agbp == NULL) {
error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp);
if (error) {
/*
* If we can't read the AGI of this ag,
* then just skip to the next one.
*/
ASSERT(cur == NULL);
agbp = NULL;
agno++;
agino = 0;
continue;
}
cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno);
error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_GE,
&tmp);
if (error) {
xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
cur = NULL;
xfs_buf_relse(agbp);
agbp = NULL;
/*
* Move up the last inode in the current
* chunk. The lookup_ge will always get
* us the first inode in the next chunk.
*/
agino += XFS_INODES_PER_CHUNK - 1;
continue;
}
}
error = xfs_inobt_get_rec(cur, &r, &i);
if (error || i == 0) {
xfs_buf_relse(agbp);
agbp = NULL;
xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
cur = NULL;
agno++;
agino = 0;
continue;
}
agino = r.ir_startino + XFS_INODES_PER_CHUNK - 1;
buffer[bufidx].xi_startino =
XFS_AGINO_TO_INO(mp, agno, r.ir_startino);
buffer[bufidx].xi_alloccount =
XFS_INODES_PER_CHUNK - r.ir_freecount;
buffer[bufidx].xi_allocmask = ~r.ir_free;
bufidx++;
left--;
if (bufidx == bcount) {
long written;
if (formatter(ubuffer, buffer, bufidx, &written)) {
error = XFS_ERROR(EFAULT);
break;
}
ubuffer += written;
*count += bufidx;
bufidx = 0;
}
if (left) {
error = xfs_btree_increment(cur, 0, &tmp);
if (error) {
xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
cur = NULL;
xfs_buf_relse(agbp);
agbp = NULL;
/*
* The agino value has already been bumped.
* Just try to skip up to it.
*/
agino += XFS_INODES_PER_CHUNK;
continue;
}
}
}
if (!error) {
if (bufidx) {
long written;
if (formatter(ubuffer, buffer, bufidx, &written))
error = XFS_ERROR(EFAULT);
else
*count += bufidx;
}
*lastino = XFS_AGINO_TO_INO(mp, agno, agino);
}
kmem_free(buffer);
if (cur)
xfs_btree_del_cursor(cur, (error ? XFS_BTREE_ERROR :
XFS_BTREE_NOERROR));
if (agbp)
xfs_buf_relse(agbp);
return error;
}