UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/thunderbolt/sb_regs.h

36 lines
1.2 KiB
C
Raw Normal View History

thunderbolt: Implement USB4 port sideband operations for retimer access USB4 spec specifies standard set of sideband operations that are send over the low speed link to access either retimers on the link or the link parter (the other router). The USB4 retimer spec extends these and adds operations for retimer NVM upgrade. This implements the retimer access and NVM upgrade USB4 port sideband operations which we need for retimer support in the patch that follows. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-05 22:33:46 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* USB4 port sideband registers found on routers and retimers
*
* Copyright (C) 2020, Intel Corporation
* Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
* Rajmohan Mani <rajmohan.mani@intel.com>
*/
#ifndef _SB_REGS
#define _SB_REGS
thunderbolt: Add support for on-board retimers USB4 spec specifies standard access to retimers (both on-board and cable) through USB4 port sideband access. This makes it possible to upgrade their firmware in the same way than we already do with the routers. This enumerates on-board retimers under each USB4 port when the link comes up and adds them to the bus under the router the retimer belongs to. Retimers are exposed in sysfs with name like <device>:<port>.<index> where device is the router the retimer belongs to, port is the USB4 port the retimer is connected to and index is the retimer index under that port (starting from 1). This applies to the upstream USB4 port as well so if there is on-board retimer between the port and the router it is also added accordingly. At this time we do not add cable retimers but there is no techincal restriction to do so in the future if needed. It is not clear whether it makes sense to upgrade their firmwares and at least Thunderbolt 3 cables it has not been done outside of lab environments. The sysfs interface is made to follow the router NVM upgrade to make it easy to extend the existing userspace (fwupd) to handle these as well. Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-05 22:39:58 +08:00
#define USB4_SB_VENDOR_ID 0x00
#define USB4_SB_PRODUCT_ID 0x01
thunderbolt: Implement USB4 port sideband operations for retimer access USB4 spec specifies standard set of sideband operations that are send over the low speed link to access either retimers on the link or the link parter (the other router). The USB4 retimer spec extends these and adds operations for retimer NVM upgrade. This implements the retimer access and NVM upgrade USB4 port sideband operations which we need for retimer support in the patch that follows. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-05 22:33:46 +08:00
#define USB4_SB_OPCODE 0x08
enum usb4_sb_opcode {
USB4_SB_OPCODE_ERR = 0x20525245, /* "ERR " */
USB4_SB_OPCODE_ONS = 0x444d4321, /* "!CMD" */
thunderbolt: Add additional USB4 port operations for retimer access When accessing retimers when there is no cable connected we are going to need additional USB4 port operations. First the port needs to be put into offline mode, and then the sideband channel transactions must be enabled on the SBTX line. This adds support for these operations. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-01 23:38:05 +08:00
USB4_SB_OPCODE_ROUTER_OFFLINE = 0x4e45534c, /* "LSEN" */
thunderbolt: Implement USB4 port sideband operations for retimer access USB4 spec specifies standard set of sideband operations that are send over the low speed link to access either retimers on the link or the link parter (the other router). The USB4 retimer spec extends these and adds operations for retimer NVM upgrade. This implements the retimer access and NVM upgrade USB4 port sideband operations which we need for retimer support in the patch that follows. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-05 22:33:46 +08:00
USB4_SB_OPCODE_ENUMERATE_RETIMERS = 0x4d554e45, /* "ENUM" */
thunderbolt: Add additional USB4 port operations for retimer access When accessing retimers when there is no cable connected we are going to need additional USB4 port operations. First the port needs to be put into offline mode, and then the sideband channel transactions must be enabled on the SBTX line. This adds support for these operations. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-01 23:38:05 +08:00
USB4_SB_OPCODE_SET_INBOUND_SBTX = 0x5055534c, /* "LSUP" */
thunderbolt: Implement USB4 port sideband operations for retimer access USB4 spec specifies standard set of sideband operations that are send over the low speed link to access either retimers on the link or the link parter (the other router). The USB4 retimer spec extends these and adds operations for retimer NVM upgrade. This implements the retimer access and NVM upgrade USB4 port sideband operations which we need for retimer support in the patch that follows. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-05 22:33:46 +08:00
USB4_SB_OPCODE_QUERY_LAST_RETIMER = 0x5453414c, /* "LAST" */
USB4_SB_OPCODE_GET_NVM_SECTOR_SIZE = 0x53534e47, /* "GNSS" */
USB4_SB_OPCODE_NVM_SET_OFFSET = 0x53504f42, /* "BOPS" */
USB4_SB_OPCODE_NVM_BLOCK_WRITE = 0x574b4c42, /* "BLKW" */
USB4_SB_OPCODE_NVM_AUTH_WRITE = 0x48545541, /* "AUTH" */
USB4_SB_OPCODE_NVM_READ = 0x52524641, /* "AFRR" */
};
#define USB4_SB_METADATA 0x09
#define USB4_SB_METADATA_NVM_AUTH_WRITE_MASK GENMASK(5, 0)
#define USB4_SB_DATA 0x12
#endif