OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_drv.c

1009 lines
29 KiB
C
Raw Normal View History

/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
*/
/*
*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <linux/device.h>
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
#include <linux/console.h>
#include <linux/module.h>
#include <drm/drm_crtc_helper.h>
static int i915_modeset __read_mostly = -1;
module_param_named(modeset, i915_modeset, int, 0400);
MODULE_PARM_DESC(modeset,
"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
"1=on, -1=force vga console preference [default])");
unsigned int i915_fbpercrtc __always_unused = 0;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
int i915_panel_ignore_lid __read_mostly = 1;
module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
MODULE_PARM_DESC(panel_ignore_lid,
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
"-1=force lid closed, -2=force lid open)");
unsigned int i915_powersave __read_mostly = 1;
module_param_named(powersave, i915_powersave, int, 0600);
MODULE_PARM_DESC(powersave,
"Enable powersavings, fbc, downclocking, etc. (default: true)");
int i915_semaphores __read_mostly = -1;
module_param_named(semaphores, i915_semaphores, int, 0600);
MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
int i915_enable_rc6 __read_mostly = -1;
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6. "
"Different stages can be selected via bitmask values "
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
"default: -1 (use per-chip default)");
int i915_enable_fbc __read_mostly = -1;
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
MODULE_PARM_DESC(i915_enable_fbc,
"Enable frame buffer compression for power savings "
"(default: -1 (use per-chip default))");
unsigned int i915_lvds_downclock __read_mostly = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
MODULE_PARM_DESC(lvds_downclock,
"Use panel (LVDS/eDP) downclocking for power savings "
"(default: false)");
int i915_lvds_channel_mode __read_mostly;
module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
MODULE_PARM_DESC(lvds_channel_mode,
"Specify LVDS channel mode "
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
int i915_panel_use_ssc __read_mostly = -1;
module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
"(default: auto from VBT)");
int i915_vbt_sdvo_panel_type __read_mostly = -1;
module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override/Ignore selection of SDVO panel mode in the VBT "
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
static bool i915_try_reset __read_mostly = true;
module_param_named(reset, i915_try_reset, bool, 0600);
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
bool i915_enable_hangcheck __read_mostly = true;
module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
MODULE_PARM_DESC(enable_hangcheck,
"Periodically check GPU activity for detecting hangs. "
"WARNING: Disabling this can cause system wide hangs. "
"(default: true)");
int i915_enable_ppgtt __read_mostly = -1;
module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600);
MODULE_PARM_DESC(i915_enable_ppgtt,
"Enable PPGTT (default: true)");
int i915_enable_psr __read_mostly = 0;
module_param_named(enable_psr, i915_enable_psr, int, 0600);
MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
MODULE_PARM_DESC(preliminary_hw_support,
"Enable preliminary hardware support.");
int i915_disable_power_well __read_mostly = 1;
module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
MODULE_PARM_DESC(disable_power_well,
"Disable the power well when possible (default: true)");
int i915_enable_ips __read_mostly = 1;
module_param_named(enable_ips, i915_enable_ips, int, 0600);
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
bool i915_fastboot __read_mostly = 0;
module_param_named(fastboot, i915_fastboot, bool, 0600);
MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
"(default: false)");
int i915_enable_pc8 __read_mostly = 1;
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
int i915_pc8_timeout __read_mostly = 5000;
module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
bool i915_prefault_disable __read_mostly;
module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
MODULE_PARM_DESC(prefault_disable,
"Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
static struct drm_driver driver;
extern int intel_agp_enabled;
static const struct intel_device_info intel_i830_info = {
.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_845g_info = {
.gen = 2, .num_pipes = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i85x_info = {
.gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i865g_info = {
.gen = 2, .num_pipes = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i915g_info = {
.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i915gm_info = {
.gen = 3, .is_mobile = 1, .num_pipes = 2,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i945g_info = {
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i945gm_info = {
.gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
.has_hotplug = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i965g_info = {
.gen = 4, .is_broadwater = 1, .num_pipes = 2,
.has_hotplug = 1,
.has_overlay = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_i965gm_info = {
.gen = 4, .is_crestline = 1, .num_pipes = 2,
.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
.has_overlay = 1,
.supports_tv = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_g33_info = {
.gen = 3, .is_g33 = 1, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
.ring_mask = RENDER_RING,
};
static const struct intel_device_info intel_g45_info = {
.gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.ring_mask = RENDER_RING | BSD_RING,
};
static const struct intel_device_info intel_gm45_info = {
.gen = 4, .is_g4x = 1, .num_pipes = 2,
.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.supports_tv = 1,
.ring_mask = RENDER_RING | BSD_RING,
};
static const struct intel_device_info intel_pineview_info = {
.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_ironlake_d_info = {
.gen = 5, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.ring_mask = RENDER_RING | BSD_RING,
};
static const struct intel_device_info intel_ironlake_m_info = {
.gen = 5, .is_mobile = 1, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.ring_mask = RENDER_RING | BSD_RING,
};
static const struct intel_device_info intel_sandybridge_d_info = {
.gen = 6, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
.has_llc = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
.gen = 6, .is_mobile = 1, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
.has_llc = 1,
};
#define GEN7_FEATURES \
.gen = 7, .num_pipes = 3, \
.need_gfx_hws = 1, .has_hotplug = 1, \
.ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
.has_llc = 1
static const struct intel_device_info intel_ivybridge_d_info = {
GEN7_FEATURES,
.is_ivybridge = 1,
};
static const struct intel_device_info intel_ivybridge_m_info = {
GEN7_FEATURES,
.is_ivybridge = 1,
.is_mobile = 1,
.has_fbc = 1,
};
static const struct intel_device_info intel_ivybridge_q_info = {
GEN7_FEATURES,
.is_ivybridge = 1,
.num_pipes = 0, /* legal, last one wins */
};
static const struct intel_device_info intel_valleyview_m_info = {
GEN7_FEATURES,
.is_mobile = 1,
.num_pipes = 2,
.is_valleyview = 1,
.display_mmio_offset = VLV_DISPLAY_BASE,
.has_llc = 0, /* legal, last one wins */
};
static const struct intel_device_info intel_valleyview_d_info = {
GEN7_FEATURES,
.num_pipes = 2,
.is_valleyview = 1,
.display_mmio_offset = VLV_DISPLAY_BASE,
.has_llc = 0, /* legal, last one wins */
};
static const struct intel_device_info intel_haswell_d_info = {
GEN7_FEATURES,
.is_haswell = 1,
.has_ddi = 1,
.has_fpga_dbg = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
};
static const struct intel_device_info intel_haswell_m_info = {
GEN7_FEATURES,
.is_haswell = 1,
.is_mobile = 1,
.has_ddi = 1,
.has_fpga_dbg = 1,
.has_fbc = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
};
/*
* Make sure any device matches here are from most specific to most
* general. For example, since the Quanta match is based on the subsystem
* and subvendor IDs, we need it to come before the more general IVB
* PCI ID matches, otherwise we'll use the wrong info struct above.
*/
#define INTEL_PCI_IDS \
INTEL_I830_IDS(&intel_i830_info), \
INTEL_I845G_IDS(&intel_845g_info), \
INTEL_I85X_IDS(&intel_i85x_info), \
INTEL_I865G_IDS(&intel_i865g_info), \
INTEL_I915G_IDS(&intel_i915g_info), \
INTEL_I915GM_IDS(&intel_i915gm_info), \
INTEL_I945G_IDS(&intel_i945g_info), \
INTEL_I945GM_IDS(&intel_i945gm_info), \
INTEL_I965G_IDS(&intel_i965g_info), \
INTEL_G33_IDS(&intel_g33_info), \
INTEL_I965GM_IDS(&intel_i965gm_info), \
INTEL_GM45_IDS(&intel_gm45_info), \
INTEL_G45_IDS(&intel_g45_info), \
INTEL_PINEVIEW_IDS(&intel_pineview_info), \
INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \
INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \
INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \
INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \
INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \
INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \
INTEL_HSW_D_IDS(&intel_haswell_d_info), \
INTEL_HSW_M_IDS(&intel_haswell_m_info), \
INTEL_VLV_M_IDS(&intel_valleyview_m_info), \
INTEL_VLV_D_IDS(&intel_valleyview_d_info)
static const struct pci_device_id pciidlist[] = { /* aka */
INTEL_PCI_IDS,
{0, 0, 0}
};
#if defined(CONFIG_DRM_I915_KMS)
MODULE_DEVICE_TABLE(pci, pciidlist);
#endif
void intel_detect_pch(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct pci_dev *pch;
/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
* (which really amounts to a PCH but no South Display).
*/
if (INTEL_INFO(dev)->num_pipes == 0) {
dev_priv->pch_type = PCH_NOP;
return;
}
/*
* The reason to probe ISA bridge instead of Dev31:Fun0 is to
* make graphics device passthrough work easy for VMM, that only
* need to expose ISA bridge to let driver know the real hardware
* underneath. This is a requirement from virtualization team.
*
* In some virtualized environments (e.g. XEN), there is irrelevant
* ISA bridge in the system. To work reliably, we should scan trhough
* all the ISA bridge devices and check for the first match, instead
* of only checking the first one.
*/
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
while (pch) {
struct pci_dev *curr = pch;
if (pch->vendor == PCI_VENDOR_ID_INTEL) {
unsigned short id;
id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
dev_priv->pch_id = id;
if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_IBX;
DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
WARN_ON(!IS_GEN5(dev));
} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_CPT;
DRM_DEBUG_KMS("Found CougarPoint PCH\n");
WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
/* PantherPoint is CPT compatible */
dev_priv->pch_type = PCH_CPT;
DRM_DEBUG_KMS("Found PantherPoint PCH\n");
WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_LPT;
DRM_DEBUG_KMS("Found LynxPoint PCH\n");
WARN_ON(!IS_HASWELL(dev));
WARN_ON(IS_ULT(dev));
} else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_LPT;
DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
WARN_ON(!IS_HASWELL(dev));
WARN_ON(!IS_ULT(dev));
} else {
goto check_next;
}
pci_dev_put(pch);
break;
}
check_next:
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
pci_dev_put(curr);
}
if (!pch)
DRM_DEBUG_KMS("No PCH found?\n");
}
bool i915_semaphore_is_enabled(struct drm_device *dev)
{
if (INTEL_INFO(dev)->gen < 6)
return 0;
if (i915_semaphores >= 0)
return i915_semaphores;
#ifdef CONFIG_INTEL_IOMMU
/* Enable semaphores on SNB when IO remapping is off */
if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
return false;
#endif
return 1;
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
i915: ignore lid open event when resuming i915 driver needs to do modeset when 1. system resumes from sleep 2. lid is opened In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes, thus it is the i915_resume code does the modeset rather than intel_lid_notify(). But in PM_SUSPEND_FREEZE state, this will be broken because system is still responsive to the lid events. 1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid. 2. When we reopen the lid, intel_lid_notify() will do a modeset, before the system is resumed. here is the error log, [92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]() [92146.548076] Hardware name: VGN-Z540N [92146.548078] pipe_off wait timed out [92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e [92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9 [92146.548175] Call Trace: [92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0 [92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915] [92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915] [92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40 [92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915] [92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915] [92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915] [92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915] [92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915] [92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915] [92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915] [92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60 [92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80 [92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30 [92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4 [92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1 [92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19 [92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc [92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18 [92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f [92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b [92146.548607] [<c1051208>] process_one_work+0x128/0x3f0 [92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38 [92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30 [92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e [92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0 [92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240 [92146.548640] [<c1056e84>] kthread+0x94/0xa0 [92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0 [92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28 [92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0 three different modeset flags are introduced in this patch MODESET_ON_LID_OPEN: do modeset on next lid open event MODESET_DONE: modeset already done MODESET_SUSPENDED: suspended, only do modeset when system is resumed In this way, 1. when lid is closed, MODESET_ON_LID_OPEN is set so that we'll do modeset on next lid open event. 2. when lid is opened, MODESET_DONE is set so that duplicate lid open events will be ignored. 3. when system suspends, MODESET_SUSPENDED is set. In this case, we will not do modeset on any lid events. Plus, locking mechanism is also introduced to avoid racing. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-05 15:41:53 +08:00
/* ignore lid events during suspend */
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_SUSPENDED;
mutex_unlock(&dev_priv->modeset_restore_lock);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
/* We do a lot of poking in a lot of registers, make sure they work
* properly. */
hsw_disable_package_c8(dev_priv);
drm/i915: use power get/put instead of set for power on after init Currently we make sure that all power domains are enabled during driver init and turn off unneded ones only after the first modeset. Similarly during suspend we enable all power domains, which will remain on through the following resume until the first modeset. This logic is supported by intel_set_power_well() in the power domain framework. It would be nice to simplify the API, so that we only have get/put functions and make it more explicit on the higher level how this "power well on during init" logic works. This will make it also easier if in the future we want to shorten the time the power wells are on. For this add a new device private flag tracking whether we have the power wells on because of init/suspend and use only intel_display_power_get()/put(). As nothing else uses intel_set_power_well() we can remove it. This also fixes commit 6efdf354ddb186c6604d1692075421e8d2c740e9 Author: Imre Deak <imre.deak@intel.com> Date: Wed Oct 16 17:25:52 2013 +0300 drm/i915: enable only the needed power domains during modeset where removing intel_set_power_well() resulted in not releasing the reference on the power well that was taken during init and thus leaving the power well on all the time. Regression reported by Paulo. v2: - move the init_power_on flag to the power_domains struct (Daniel) v3: - add note about this being a regression fix too (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-25 22:36:48 +08:00
intel_display_set_init_power(dev, true);
drm_kms_helper_poll_disable(dev);
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error;
error = i915_gem_suspend(dev);
if (error) {
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
return error;
}
cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
drm_irq_uninstall(dev);
drm/i915: enable irqs earlier when resuming We need it to restore the ilk rc6 context, since the gpu wait no requires interrupts. But in general having interrupts around should help in code sanity, since more and more stuff is interrupt driven. This regression has been introduced in commit 3e9605018ab3e333d51cc90fccfde2031886763b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:54 2012 +0000 drm/i915: Rearrange code to only have a single method for waiting upon the ring Like in the driver load code we need to make sure that hotplug interrupts don't cause havoc with our modeset state, hence block them with the existing infrastructure. Again we ignore races where we might loose hotplug interrupts ... Note that the driver load part of the regression has already been fixed in commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup v2: Add a note to the commit message about which patch fixed the driver load part of the regression. Stable kernels need to backport both patches. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691 Cc: stable@vger.kernel.org (for 3.8 only, plese backport 52d7ecedac3f96fb5 first) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reported-and-Tested-by: Ilya Tumaykin <itumaykin@gmail.com> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05 16:50:58 +08:00
dev_priv->enable_hotplug_processing = false;
/*
* Disable CRTCs directly since we want to preserve sw state
* for _thaw.
*/
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
dev_priv->display.crtc_disable(crtc);
intel_modeset_suspend_hw(dev);
}
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-17 00:21:30 +08:00
i915_gem_suspend_gtt_mappings(dev);
i915_save_state(dev);
intel_opregion_fini(dev);
console_lock();
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
console_unlock();
return 0;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int i915_suspend(struct drm_device *dev, pm_message_t state)
{
int error;
if (!dev || !dev->dev_private) {
DRM_ERROR("dev: %p\n", dev);
DRM_ERROR("DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (state.event == PM_EVENT_PRETHAW)
return 0;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
error = i915_drm_freeze(dev);
if (error)
return error;
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
pci_disable_device(dev->pdev);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
return 0;
}
void intel_console_resume(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private,
console_resume_work);
struct drm_device *dev = dev_priv->dev;
console_lock();
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
console_unlock();
}
static void intel_resume_hotplug(struct drm_device *dev)
{
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
mutex_lock(&mode_config->mutex);
DRM_DEBUG_KMS("running encoder hotplug functions\n");
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
if (encoder->hot_plug)
encoder->hot_plug(encoder);
mutex_unlock(&mode_config->mutex);
/* Just fire off a uevent and let userspace tell us what to do */
drm_helper_hpd_irq_event(dev);
}
static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
intel_uncore_early_sanitize(dev);
intel_uncore_sanitize(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET) &&
restore_gtt_mappings) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
intel_power_domains_init_hw(dev);
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_init_pch_refclk(dev);
mutex_lock(&dev->struct_mutex);
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
drm/i915: enable irqs earlier when resuming We need it to restore the ilk rc6 context, since the gpu wait no requires interrupts. But in general having interrupts around should help in code sanity, since more and more stuff is interrupt driven. This regression has been introduced in commit 3e9605018ab3e333d51cc90fccfde2031886763b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:54 2012 +0000 drm/i915: Rearrange code to only have a single method for waiting upon the ring Like in the driver load code we need to make sure that hotplug interrupts don't cause havoc with our modeset state, hence block them with the existing infrastructure. Again we ignore races where we might loose hotplug interrupts ... Note that the driver load part of the regression has already been fixed in commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup v2: Add a note to the commit message about which patch fixed the driver load part of the regression. Stable kernels need to backport both patches. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691 Cc: stable@vger.kernel.org (for 3.8 only, plese backport 52d7ecedac3f96fb5 first) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reported-and-Tested-by: Ilya Tumaykin <itumaykin@gmail.com> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05 16:50:58 +08:00
/* We need working interrupts for modeset enabling ... */
drm_irq_install(dev);
intel_modeset_init_hw(dev);
drm_modeset_lock_all(dev);
intel_modeset_setup_hw_state(dev, true);
drm_modeset_unlock_all(dev);
drm/i915: enable irqs earlier when resuming We need it to restore the ilk rc6 context, since the gpu wait no requires interrupts. But in general having interrupts around should help in code sanity, since more and more stuff is interrupt driven. This regression has been introduced in commit 3e9605018ab3e333d51cc90fccfde2031886763b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:54 2012 +0000 drm/i915: Rearrange code to only have a single method for waiting upon the ring Like in the driver load code we need to make sure that hotplug interrupts don't cause havoc with our modeset state, hence block them with the existing infrastructure. Again we ignore races where we might loose hotplug interrupts ... Note that the driver load part of the regression has already been fixed in commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup v2: Add a note to the commit message about which patch fixed the driver load part of the regression. Stable kernels need to backport both patches. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691 Cc: stable@vger.kernel.org (for 3.8 only, plese backport 52d7ecedac3f96fb5 first) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reported-and-Tested-by: Ilya Tumaykin <itumaykin@gmail.com> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05 16:50:58 +08:00
/*
* ... but also need to make sure that hotplug processing
* doesn't cause havoc. Like in the driver load code we don't
* bother with the tiny race here where we might loose hotplug
* notifications.
* */
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
intel_hpd_init(dev);
drm/i915: enable irqs earlier when resuming We need it to restore the ilk rc6 context, since the gpu wait no requires interrupts. But in general having interrupts around should help in code sanity, since more and more stuff is interrupt driven. This regression has been introduced in commit 3e9605018ab3e333d51cc90fccfde2031886763b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:54 2012 +0000 drm/i915: Rearrange code to only have a single method for waiting upon the ring Like in the driver load code we need to make sure that hotplug interrupts don't cause havoc with our modeset state, hence block them with the existing infrastructure. Again we ignore races where we might loose hotplug interrupts ... Note that the driver load part of the regression has already been fixed in commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup v2: Add a note to the commit message about which patch fixed the driver load part of the regression. Stable kernels need to backport both patches. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691 Cc: stable@vger.kernel.org (for 3.8 only, plese backport 52d7ecedac3f96fb5 first) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reported-and-Tested-by: Ilya Tumaykin <itumaykin@gmail.com> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05 16:50:58 +08:00
dev_priv->enable_hotplug_processing = true;
/* Config may have changed between suspend and resume */
intel_resume_hotplug(dev);
}
intel_opregion_init(dev);
/*
* The console lock can be pretty contented on resume due
* to all the printk activity. Try to keep it out of the hot
* path of resume if possible.
*/
if (console_trylock()) {
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
console_unlock();
} else {
schedule_work(&dev_priv->console_resume_work);
}
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
/* Undo what we did at i915_drm_freeze so the refcount goes back to the
* expected level. */
hsw_enable_package_c8(dev_priv);
i915: ignore lid open event when resuming i915 driver needs to do modeset when 1. system resumes from sleep 2. lid is opened In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes, thus it is the i915_resume code does the modeset rather than intel_lid_notify(). But in PM_SUSPEND_FREEZE state, this will be broken because system is still responsive to the lid events. 1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid. 2. When we reopen the lid, intel_lid_notify() will do a modeset, before the system is resumed. here is the error log, [92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]() [92146.548076] Hardware name: VGN-Z540N [92146.548078] pipe_off wait timed out [92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e [92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9 [92146.548175] Call Trace: [92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0 [92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915] [92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915] [92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40 [92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915] [92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915] [92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915] [92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915] [92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915] [92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915] [92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915] [92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60 [92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80 [92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30 [92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4 [92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1 [92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19 [92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc [92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18 [92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f [92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b [92146.548607] [<c1051208>] process_one_work+0x128/0x3f0 [92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38 [92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30 [92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e [92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0 [92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240 [92146.548640] [<c1056e84>] kthread+0x94/0xa0 [92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0 [92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28 [92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0 three different modeset flags are introduced in this patch MODESET_ON_LID_OPEN: do modeset on next lid open event MODESET_DONE: modeset already done MODESET_SUSPENDED: suspended, only do modeset when system is resumed In this way, 1. when lid is closed, MODESET_ON_LID_OPEN is set so that we'll do modeset on next lid open event. 2. when lid is opened, MODESET_DONE is set so that duplicate lid open events will be ignored. 3. when system suspends, MODESET_SUSPENDED is set. In this case, we will not do modeset on any lid events. Plus, locking mechanism is also introduced to avoid racing. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-05 15:41:53 +08:00
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_DONE;
mutex_unlock(&dev_priv->modeset_restore_lock);
return error;
}
static int i915_drm_thaw(struct drm_device *dev)
{
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-17 00:21:30 +08:00
i915_check_and_clear_faults(dev);
return __i915_drm_thaw(dev, true);
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int i915_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
if (pci_enable_device(dev->pdev))
return -EIO;
pci_set_master(dev->pdev);
/*
* Platforms with opregion should have sane BIOS, older ones (gen3 and
* earlier) need to restore the GTT mappings since the BIOS might clear
* all our scratch PTEs.
*/
ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
/**
* i915_reset - reset chip after a hang
* @dev: drm device to reset
*
* Reset the chip. Useful if a hang is detected. Returns zero on successful
* reset or otherwise an error code.
*
* Procedure is fairly simple:
* - reset the chip using the reset reg
* - re-init context state
* - re-init hardware status page
* - re-init ring buffer
* - re-init interrupt state
* - re-init display
*/
int i915_reset(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
bool simulated;
int ret;
if (!i915_try_reset)
return 0;
mutex_lock(&dev->struct_mutex);
i915_gem_reset(dev);
simulated = dev_priv->gpu_error.stop_rings != 0;
ret = intel_gpu_reset(dev);
/* Also reset the gpu hangman. */
if (simulated) {
DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
dev_priv->gpu_error.stop_rings = 0;
if (ret == -ENODEV) {
DRM_ERROR("Reset not implemented, but ignoring "
"error for simulated gpu hangs\n");
ret = 0;
}
}
if (ret) {
DRM_ERROR("Failed to reset chip.\n");
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* Ok, now get things going again... */
/*
* Everything depends on having the GTT running, so we need to start
* there. Fortunately we don't need to do this unless we reset the
* chip at a PCI level.
*
* Next we need to restore the context, but we don't use those
* yet either...
*
* Ring buffer needs to be re-initialized in the KMS case, or if X
* was running at the time of the reset (i.e. we weren't VT
* switched away).
*/
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
!dev_priv->ums.mm_suspended) {
bool hw_contexts_disabled = dev_priv->hw_contexts_disabled;
dev_priv->ums.mm_suspended = 0;
ret = i915_gem_init_hw(dev);
if (!hw_contexts_disabled && dev_priv->hw_contexts_disabled)
DRM_ERROR("HW contexts didn't survive reset\n");
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("Failed hw init on reset %d\n", ret);
return ret;
}
drm_irq_uninstall(dev);
drm_irq_install(dev);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
intel_hpd_init(dev);
} else {
mutex_unlock(&dev->struct_mutex);
}
return 0;
}
static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct intel_device_info *intel_info =
(struct intel_device_info *) ent->driver_data;
if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
DRM_INFO("This hardware requires preliminary hardware support.\n"
"See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
return -ENODEV;
}
/* Only bind to function 0 of the device. Early generations
* used function 1 as a placeholder for multi-head. This causes
* us confusion instead, especially on the systems where both
* functions have the same PCI-ID!
*/
if (PCI_FUNC(pdev->devfn))
return -ENODEV;
/* We've managed to ship a kms-enabled ddx that shipped with an XvMC
* implementation for gen3 (and only gen3) that used legacy drm maps
* (gasp!) to share buffers between X and the client. Hence we need to
* keep around the fake agp stuff for gen3, even when kms is enabled. */
if (intel_info->gen != 3) {
driver.driver_features &=
~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP);
} else if (!intel_agp_enabled) {
DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
return -ENODEV;
}
return drm_get_pci_dev(pdev, ent, &driver);
}
static void
i915_pci_remove(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
drm_put_dev(dev);
}
static int i915_pm_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
int error;
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
error = i915_drm_freeze(drm_dev);
if (error)
return error;
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static int i915_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_resume(drm_dev);
}
static int i915_pm_freeze(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
return i915_drm_freeze(drm_dev);
}
static int i915_pm_thaw(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_thaw(drm_dev);
}
static int i915_pm_poweroff(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_freeze(drm_dev);
}
static const struct dev_pm_ops i915_pm_ops = {
.suspend = i915_pm_suspend,
.resume = i915_pm_resume,
.freeze = i915_pm_freeze,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
.restore = i915_pm_resume,
};
static const struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static const struct file_operations i915_driver_fops = {
.owner = THIS_MODULE,
.open = drm_open,
.release = drm_release,
.unlocked_ioctl = drm_ioctl,
.mmap = drm_gem_mmap,
.poll = drm_poll,
.read = drm_read,
#ifdef CONFIG_COMPAT
.compat_ioctl = i915_compat_ioctl,
#endif
.llseek = noop_llseek,
};
static struct drm_driver driver = {
/* Don't use MTRRs here; the Xserver or userspace app should
* deal with them for Intel hardware.
*/
.driver_features =
drm: rip out drm_core_has_MTRR checks The new arch_phys_wc_add/del functions do the right thing both with and without MTRR support in the kernel. So we can drop these additional checks. David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since it's now unused, which spurred me to do a bit a better audit of the affected drivers. David helped a lot in that. Quoting our mail discussion: On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote: > On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote: >> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote: >>>> -#if __OS_HAS_MTRR >>>> -static inline int drm_core_has_MTRR(struct drm_device *dev) >>>> -{ >>>> - return drm_core_check_feature(dev, DRIVER_USE_MTRR); >>>> -} >>>> -#else >>>> -#define drm_core_has_MTRR(dev) (0) >>>> -#endif >>>> - >>> >>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting >>> it in .driver_features). Any reason to keep it around? >> >> Yeah, I guess we could rip things out. Which will also force me to >> properly audit drivers for the eventual behaviour change this could >> entail (in case there's an x86 driver which did not ask for an mtrr, >> but iirc there isn't). > > david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if > test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ; > fi ; done > drivers/gpu/drm/exynos > drivers/gpu/drm/gma500 > drivers/gpu/drm/i2c > drivers/gpu/drm/nouveau > drivers/gpu/drm/omapdrm > drivers/gpu/drm/qxl > drivers/gpu/drm/rcar-du > drivers/gpu/drm/shmobile > drivers/gpu/drm/tilcdc > drivers/gpu/drm/ttm > drivers/gpu/drm/udl > drivers/gpu/drm/vmwgfx > david@david-mb ~/dev/kernel/linux $ > > So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR. > But I cannot tell whether they break if we call arch_phys_wc_add/del, > anyway. At least nouveau seemed to work here, but it doesn't use AGP > or drm_bufs, I guess. Cool, thanks a lot for stitching together the list of drivers to look at. So for real KMS drivers it's the drives responsibility to add an mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that already. Somehow the savage driver also ends up doing that, I have no idea why. Note that gma500 as a pure KMS driver doesn't need MTRR setup since the platforms that it supports all support PAT. So no MTRRs needed to get wc iomappings. The mtrr support in the drm core is all for legacy mappings of garts, framebuffers and registers. All legacy drivers set the USE_MTRR flag, so we're good there. All in all I think we can really just ditch this /endquote v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann v3: Rebase on top of David Herrmann's agp setup/cleanup changes. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08 21:41:27 +08:00
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
DRIVER_RENDER,
.load = i915_driver_load,
.unload = i915_driver_unload,
.open = i915_driver_open,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
.master_create = i915_master_create,
.master_destroy = i915_master_destroy,
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = i915_debugfs_init,
.debugfs_cleanup = i915_debugfs_cleanup,
#endif
.gem_free_object = i915_gem_free_object,
.gem_vm_ops = &i915_gem_vm_ops,
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_export = i915_gem_prime_export,
.gem_prime_import = i915_gem_prime_import,
.dumb_create = i915_gem_dumb_create,
.dumb_map_offset = i915_gem_mmap_gtt,
.dumb_destroy = drm_gem_dumb_destroy,
.ioctls = i915_ioctls,
.fops = &i915_driver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
};
static struct pci_driver i915_pci_driver = {
.name = DRIVER_NAME,
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
.driver.pm = &i915_pm_ops,
};
static int __init i915_init(void)
{
driver.num_ioctls = i915_max_ioctl;
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
*
* Otherwise, just follow the parameter (defaulting to off).
*
* Allow optional vga_text_mode_force boot option to override
* the default behavior.
*/
#if defined(CONFIG_DRM_I915_KMS)
if (i915_modeset != 0)
driver.driver_features |= DRIVER_MODESET;
#endif
if (i915_modeset == 1)
driver.driver_features |= DRIVER_MODESET;
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force() && i915_modeset == -1)
driver.driver_features &= ~DRIVER_MODESET;
#endif
if (!(driver.driver_features & DRIVER_MODESET))
driver.get_vblank_timestamp = NULL;
return drm_pci_init(&driver, &i915_pci_driver);
}
static void __exit i915_exit(void)
{
drm_pci_exit(&driver, &i915_pci_driver);
}
module_init(i915_init);
module_exit(i915_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");