UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/boot/dts/omap2.dtsi

299 lines
6.1 KiB
Plaintext
Raw Normal View History

arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
/*
* Device Tree Source for OMAP2 SoC
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
ARM: dts: OMAP2+: Use existing constants for GPIOs Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-31 20:32:56 +08:00
#include <dt-bindings/gpio/gpio.h>
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
#include <dt-bindings/interrupt-controller/irq.h>
ARM: dts: OMAP2+: Use pinctrl constants Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-31 20:32:59 +08:00
#include <dt-bindings/pinctrl/omap.h>
ARM: dts: OMAP2+: Use existing constants for GPIOs Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-31 20:32:56 +08:00
ARM: dts: OMAP2+: Use #include for all device trees Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-31 20:32:55 +08:00
#include "skeleton.dtsi"
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
/ {
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplication The interrupt-parent attribute does not have to be added in each node since the fmwk will check for the parent as well to get it. Create an interrupt-parent for OMAP2, OMAP3, AM33xx and remove the attributes from every nodes that were using it. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Sebastien Guiriec <s-guiriec@ti.com>
2012-10-24 16:47:52 +08:00
interrupt-parent = <&intc>;
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
i2c0 = &i2c1;
i2c1 = &i2c2;
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
};
cpus {
ARM: dts: omap: cpus/cpu nodes dts updates This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2013-04-19 01:35:59 +08:00
#address-cells = <0>;
#size-cells = <0>;
cpu {
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
compatible = "arm,arm1136jf-s";
ARM: dts: omap: cpus/cpu nodes dts updates This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2013-04-19 01:35:59 +08:00
device_type = "cpu";
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
};
};
ARM: dts: OMAP2+: Add PMU nodes Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices. Please note that the node for OMAP4460 has been placed in a separate header file for OMAP4460, because the node is not compatible with OMAP4430. The node for OMAP4430 is not included because PMU is not currently supported on OMAP4430 due to the absence of a cross-trigger interface driver. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-10-18 22:28:52 +08:00
pmu {
compatible = "arm,arm1136-pmu";
interrupts = <3>;
};
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap2-mpu";
ti,hwmods = "mpu";
};
};
ocp {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main";
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
aes: aes@480a6000 {
compatible = "ti,omap2-aes";
ti,hwmods = "aes";
reg = <0x480a6000 0x50>;
dmas = <&sdma 9 &sdma 10>;
dma-names = "tx", "rx";
};
hdq1w: 1w@480b2000 {
compatible = "ti,omap2420-1w";
ti,hwmods = "hdq1w";
reg = <0x480b2000 0x1000>;
interrupts = <58>;
};
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
arm/dts: OMAP2: Fix interrupt controller binding When booting with device-tree on an OMAP2420H4, the kernel is hanging when initialising the interrupts and following kernel dumps is seen ... [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4() [ 0.000000] unable to get intc registers [ 0.000000] Modules linked in: [ 0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64) [ 0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) [ 0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288) [ 0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c) [ 0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304) [ 0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] of_irq_init: children remain, but no parents The OMAP2 interrupt controller binding is missing the number of interrupts and interrupt controller register address. Adding these fixes the problem. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-13 08:40:46 +08:00
reg = <0x480FE000 0x1000>;
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
};
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Add SDMA controller binding for OMAP2+ devices and populate DMA client information for SPI and MMC peripheral on OMAP3+ devices. Please note that OMAP24xx devices do not have SPI and MMC bindings available yet and so DMA client information is not populated. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-04-27 02:47:59 +08:00
sdma: dma-controller@48056000 {
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
ti,hwmods = "dma";
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Add SDMA controller binding for OMAP2+ devices and populate DMA client information for SPI and MMC peripheral on OMAP3+ devices. Please note that OMAP24xx devices do not have SPI and MMC bindings available yet and so DMA client information is not populated. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-04-27 02:47:59 +08:00
reg = <0x48056000 0x1000>;
interrupts = <12>,
<13>,
<14>,
<15>;
#dma-cells = <1>;
ARM: dts: omap2: Correct the dma controller's property names According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-20 21:42:02 +08:00
dma-channels = <32>;
dma-requests = <64>;
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Add SDMA controller binding for OMAP2+ devices and populate DMA client information for SPI and MMC peripheral on OMAP3+ devices. Please note that OMAP24xx devices do not have SPI and MMC bindings available yet and so DMA client information is not populated. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-04-27 02:47:59 +08:00
};
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
i2c1: i2c@48070000 {
compatible = "ti,omap2-i2c";
ti,hwmods = "i2c1";
reg = <0x48070000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <56>;
dmas = <&sdma 27 &sdma 28>;
dma-names = "tx", "rx";
};
i2c2: i2c@48072000 {
compatible = "ti,omap2-i2c";
ti,hwmods = "i2c2";
reg = <0x48072000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <57>;
dmas = <&sdma 29 &sdma 30>;
dma-names = "tx", "rx";
};
mcspi1: mcspi@48098000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi1";
reg = <0x48098000 0x100>;
interrupts = <65>;
dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
};
mcspi2: mcspi@4809a000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi2";
reg = <0x4809a000 0x100>;
interrupts = <66>;
dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
rng: rng@480a0000 {
compatible = "ti,omap2-rng";
ti,hwmods = "rng";
reg = <0x480a0000 0x50>;
ARM: dts: OMAP2: fix interrupt number for rng The irq data for rng module defined in hwmod data previously missed the OMAP_INTC_START relative offset, so the interrupt number is probably misconfigured during the DT node addition adjusting for this OMAP_INTC_START. Interrupt #36 is associated with a watchdog timer, so fix the rng module's interrupt to the appropriate interrupt #52. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-24 06:59:39 +08:00
interrupts = <52>;
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
};
sham: sham@480a4000 {
compatible = "ti,omap2-sham";
ti,hwmods = "sham";
reg = <0x480a4000 0x64>;
interrupts = <51>;
dmas = <&sdma 13>;
dma-names = "rx";
};
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
reg = <0x4806a000 0x2000>;
interrupts = <72>;
dmas = <&sdma 49 &sdma 50>;
dma-names = "tx", "rx";
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart2";
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
reg = <0x4806c000 0x400>;
interrupts = <73>;
dmas = <&sdma 51 &sdma 52>;
dma-names = "tx", "rx";
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
clock-frequency = <48000000>;
};
uart3: serial@4806e000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart3";
ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Looks like we're missing few entries for omap2 and the drivers have only worked because of the omap hwmod building the devices for the missing entries. Let's fix the missing entries so we don't need to rely on hwmod for the basic data and can then later on remove the duplicate data from hwmod. Otherwise device tree only drivers will not work properly. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15 07:25:09 +08:00
reg = <0x4806e000 0x400>;
interrupts = <74>;
dmas = <&sdma 53 &sdma 54>;
dma-names = "tx", "rx";
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
clock-frequency = <48000000>;
};
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
timer2: timer@4802a000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x4802a000 0x400>;
interrupts = <38>;
ti,hwmods = "timer2";
};
timer3: timer@48078000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x48078000 0x400>;
interrupts = <39>;
ti,hwmods = "timer3";
};
timer4: timer@4807a000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x4807a000 0x400>;
interrupts = <40>;
ti,hwmods = "timer4";
};
timer5: timer@4807c000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x4807c000 0x400>;
interrupts = <41>;
ti,hwmods = "timer5";
ti,timer-dsp;
};
timer6: timer@4807e000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x4807e000 0x400>;
interrupts = <42>;
ti,hwmods = "timer6";
ti,timer-dsp;
};
timer7: timer@48080000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x48080000 0x400>;
interrupts = <43>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
timer8: timer@48082000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x48082000 0x400>;
interrupts = <44>;
ti,hwmods = "timer8";
ti,timer-dsp;
};
timer9: timer@48084000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x48084000 0x400>;
interrupts = <45>;
ti,hwmods = "timer9";
ti,timer-pwm;
};
timer10: timer@48086000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x48086000 0x400>;
interrupts = <46>;
ti,hwmods = "timer10";
ti,timer-pwm;
};
timer11: timer@48088000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x48088000 0x400>;
interrupts = <47>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
timer12: timer@4808a000 {
ARM: dts: OMAP2+: Update DMTIMER compatibility property Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 01:38:18 +08:00
compatible = "ti,omap2420-timer";
ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-19 22:59:00 +08:00
reg = <0x4808a000 0x400>;
interrupts = <48>;
ti,hwmods = "timer12";
ti,timer-pwm;
};
ARM: omap2.dtsi: add omapdss information Add DT data for OMAP2 display subsystem, which contains the following blocks: dss - the wrapper/glue for the display modules dispc - display controller rfbi - MIPI DBI encoder venc - analog TV encoder Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-12-18 16:22:07 +08:00
dss: dss@48050000 {
compatible = "ti,omap2-dss";
reg = <0x48050000 0x400>;
status = "disabled";
ti,hwmods = "dss_core";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dispc@48050400 {
compatible = "ti,omap2-dispc";
reg = <0x48050400 0x400>;
interrupts = <25>;
ti,hwmods = "dss_dispc";
};
rfbi: encoder@48050800 {
compatible = "ti,omap2-rfbi";
reg = <0x48050800 0x400>;
status = "disabled";
ti,hwmods = "dss_rfbi";
};
venc: encoder@48050c00 {
compatible = "ti,omap2-venc";
reg = <0x48050c00 0x400>;
status = "disabled";
ti,hwmods = "dss_venc";
};
};
arm/dts: Add minimal device tree support for omap2420 and omap2430 Add minimal device tree support for omap2420 and omap2430. This is needed to keep the uart functional on omap2 after omap_serial_init is removed from board-generic.c. Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-17 06:13:09 +08:00
};
};