OpenCloudOS-Kernel/include/linux/nfs_page.h

193 lines
5.9 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/include/linux/nfs_page.h
*
* Copyright (C) 2000 Trond Myklebust
*
* NFS page cache wrapper.
*/
#ifndef _LINUX_NFS_PAGE_H
#define _LINUX_NFS_PAGE_H
#include <linux/list.h>
#include <linux/pagemap.h>
#include <linux/wait.h>
#include <linux/sunrpc/auth.h>
#include <linux/nfs_xdr.h>
#include <linux/kref.h>
/*
* Valid flags for a dirty buffer
*/
enum {
PG_BUSY = 0, /* nfs_{un}lock_request */
PG_MAPPED, /* page private set for buffered io */
PG_CLEAN, /* write succeeded */
PG_COMMIT_TO_DS, /* used by pnfs layouts */
PG_INODE_REF, /* extra ref held by inode when in writeback */
nfs: add support for multiple nfs reqs per page Add "page groups" - a circular list of nfs requests (struct nfs_page) that all reference the same page. This gives nfs read and write paths the ability to account for sub-page regions independently. This somewhat follows the design of struct buffer_head's sub-page accounting. Only "head" requests are ever added/removed from the inode list in the buffered write path. "head" and "sub" requests are treated the same through the read path and the rest of the write/commit path. Requests are given an extra reference across the life of the list. Page groups are never rejoined after being split. If the read/write request fails and the client falls back to another path (ie revert to MDS in PNFS case), the already split requests are pushed through the recoalescing code again, which may split them further and then coalesce them into properly sized requests on the wire. Fragmentation shouldn't be a problem with the current design, because we flush all requests in page group when a non-contiguous request is added, so the only time resplitting should occur is on a resend of a read or write. This patch lays the groundwork for sub-page splitting, but does not actually do any splitting. For now all page groups have one request as pg_test functions don't yet split pages. There are several related patches that are needed support multiple requests per page group. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-15 23:56:45 +08:00
PG_HEADLOCK, /* page group lock of wb_head */
PG_TEARDOWN, /* page group sync for destroy */
PG_UNLOCKPAGE, /* page group sync bit in read path */
PG_UPTODATE, /* page group sync bit in read path */
PG_WB_END, /* page group sync bit in write path */
PG_REMOVE, /* page group sync bit in write path */
PG_CONTENDED1, /* Is someone waiting for a lock? */
PG_CONTENDED2, /* Is someone waiting for a lock? */
};
struct nfs_inode;
struct nfs_page {
struct list_head wb_list; /* Defines state of page: */
struct page *wb_page; /* page to read in/write out */
struct nfs_open_context *wb_context; /* File state context info */
struct nfs_lock_context *wb_lock_context; /* lock context info */
pgoff_t wb_index; /* Offset >> PAGE_SHIFT */
unsigned int wb_offset, /* Offset & ~PAGE_MASK */
wb_pgbase, /* Start of page data */
wb_bytes; /* Length of request */
struct kref wb_kref; /* reference count */
unsigned long wb_flags;
struct nfs_write_verifier wb_verf; /* Commit cookie */
nfs: add support for multiple nfs reqs per page Add "page groups" - a circular list of nfs requests (struct nfs_page) that all reference the same page. This gives nfs read and write paths the ability to account for sub-page regions independently. This somewhat follows the design of struct buffer_head's sub-page accounting. Only "head" requests are ever added/removed from the inode list in the buffered write path. "head" and "sub" requests are treated the same through the read path and the rest of the write/commit path. Requests are given an extra reference across the life of the list. Page groups are never rejoined after being split. If the read/write request fails and the client falls back to another path (ie revert to MDS in PNFS case), the already split requests are pushed through the recoalescing code again, which may split them further and then coalesce them into properly sized requests on the wire. Fragmentation shouldn't be a problem with the current design, because we flush all requests in page group when a non-contiguous request is added, so the only time resplitting should occur is on a resend of a read or write. This patch lays the groundwork for sub-page splitting, but does not actually do any splitting. For now all page groups have one request as pg_test functions don't yet split pages. There are several related patches that are needed support multiple requests per page group. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-15 23:56:45 +08:00
struct nfs_page *wb_this_page; /* list of reqs for this page */
struct nfs_page *wb_head; /* head pointer for req list */
};
struct nfs_pageio_descriptor;
struct nfs_pageio_ops {
void (*pg_init)(struct nfs_pageio_descriptor *, struct nfs_page *);
size_t (*pg_test)(struct nfs_pageio_descriptor *, struct nfs_page *,
struct nfs_page *);
int (*pg_doio)(struct nfs_pageio_descriptor *);
unsigned int (*pg_get_mirror_count)(struct nfs_pageio_descriptor *,
struct nfs_page *);
void (*pg_cleanup)(struct nfs_pageio_descriptor *);
};
struct nfs_rw_ops {
struct nfs_pgio_header *(*rw_alloc_header)(void);
void (*rw_free_header)(struct nfs_pgio_header *);
int (*rw_done)(struct rpc_task *, struct nfs_pgio_header *,
struct inode *);
void (*rw_result)(struct rpc_task *, struct nfs_pgio_header *);
void (*rw_initiate)(struct nfs_pgio_header *, struct rpc_message *,
const struct nfs_rpc_ops *,
struct rpc_task_setup *, int);
};
struct nfs_pgio_mirror {
struct list_head pg_list;
unsigned long pg_bytes_written;
size_t pg_count;
size_t pg_bsize;
unsigned int pg_base;
unsigned char pg_recoalesce : 1;
};
struct nfs_pageio_descriptor {
unsigned char pg_moreio : 1;
struct inode *pg_inode;
const struct nfs_pageio_ops *pg_ops;
const struct nfs_rw_ops *pg_rw_ops;
int pg_ioflags;
int pg_error;
const struct rpc_call_ops *pg_rpc_callops;
const struct nfs_pgio_completion_ops *pg_completion_ops;
struct pnfs_layout_segment *pg_lseg;
struct nfs_io_completion *pg_io_completion;
struct nfs_direct_req *pg_dreq;
unsigned int pg_bsize; /* default bsize for mirrors */
u32 pg_mirror_count;
struct nfs_pgio_mirror *pg_mirrors;
struct nfs_pgio_mirror pg_mirrors_static[1];
struct nfs_pgio_mirror *pg_mirrors_dynamic;
u32 pg_mirror_idx; /* current mirror */
};
/* arbitrarily selected limit to number of mirrors */
#define NFS_PAGEIO_DESCRIPTOR_MIRROR_MAX 16
#define NFS_WBACK_BUSY(req) (test_bit(PG_BUSY,&(req)->wb_flags))
extern struct nfs_page *nfs_create_request(struct nfs_open_context *ctx,
struct page *page,
nfs: add support for multiple nfs reqs per page Add "page groups" - a circular list of nfs requests (struct nfs_page) that all reference the same page. This gives nfs read and write paths the ability to account for sub-page regions independently. This somewhat follows the design of struct buffer_head's sub-page accounting. Only "head" requests are ever added/removed from the inode list in the buffered write path. "head" and "sub" requests are treated the same through the read path and the rest of the write/commit path. Requests are given an extra reference across the life of the list. Page groups are never rejoined after being split. If the read/write request fails and the client falls back to another path (ie revert to MDS in PNFS case), the already split requests are pushed through the recoalescing code again, which may split them further and then coalesce them into properly sized requests on the wire. Fragmentation shouldn't be a problem with the current design, because we flush all requests in page group when a non-contiguous request is added, so the only time resplitting should occur is on a resend of a read or write. This patch lays the groundwork for sub-page splitting, but does not actually do any splitting. For now all page groups have one request as pg_test functions don't yet split pages. There are several related patches that are needed support multiple requests per page group. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-15 23:56:45 +08:00
struct nfs_page *last,
unsigned int offset,
unsigned int count);
nfs: add support for multiple nfs reqs per page Add "page groups" - a circular list of nfs requests (struct nfs_page) that all reference the same page. This gives nfs read and write paths the ability to account for sub-page regions independently. This somewhat follows the design of struct buffer_head's sub-page accounting. Only "head" requests are ever added/removed from the inode list in the buffered write path. "head" and "sub" requests are treated the same through the read path and the rest of the write/commit path. Requests are given an extra reference across the life of the list. Page groups are never rejoined after being split. If the read/write request fails and the client falls back to another path (ie revert to MDS in PNFS case), the already split requests are pushed through the recoalescing code again, which may split them further and then coalesce them into properly sized requests on the wire. Fragmentation shouldn't be a problem with the current design, because we flush all requests in page group when a non-contiguous request is added, so the only time resplitting should occur is on a resend of a read or write. This patch lays the groundwork for sub-page splitting, but does not actually do any splitting. For now all page groups have one request as pg_test functions don't yet split pages. There are several related patches that are needed support multiple requests per page group. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-15 23:56:45 +08:00
extern void nfs_release_request(struct nfs_page *);
extern void nfs_pageio_init(struct nfs_pageio_descriptor *desc,
struct inode *inode,
const struct nfs_pageio_ops *pg_ops,
const struct nfs_pgio_completion_ops *compl_ops,
const struct nfs_rw_ops *rw_ops,
size_t bsize,
int how);
extern int nfs_pageio_add_request(struct nfs_pageio_descriptor *,
struct nfs_page *);
extern int nfs_pageio_resend(struct nfs_pageio_descriptor *,
struct nfs_pgio_header *);
extern void nfs_pageio_complete(struct nfs_pageio_descriptor *desc);
extern void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *, pgoff_t);
extern size_t nfs_generic_pg_test(struct nfs_pageio_descriptor *desc,
struct nfs_page *prev,
struct nfs_page *req);
extern int nfs_wait_on_request(struct nfs_page *);
extern void nfs_unlock_request(struct nfs_page *req);
nfs: add support for multiple nfs reqs per page Add "page groups" - a circular list of nfs requests (struct nfs_page) that all reference the same page. This gives nfs read and write paths the ability to account for sub-page regions independently. This somewhat follows the design of struct buffer_head's sub-page accounting. Only "head" requests are ever added/removed from the inode list in the buffered write path. "head" and "sub" requests are treated the same through the read path and the rest of the write/commit path. Requests are given an extra reference across the life of the list. Page groups are never rejoined after being split. If the read/write request fails and the client falls back to another path (ie revert to MDS in PNFS case), the already split requests are pushed through the recoalescing code again, which may split them further and then coalesce them into properly sized requests on the wire. Fragmentation shouldn't be a problem with the current design, because we flush all requests in page group when a non-contiguous request is added, so the only time resplitting should occur is on a resend of a read or write. This patch lays the groundwork for sub-page splitting, but does not actually do any splitting. For now all page groups have one request as pg_test functions don't yet split pages. There are several related patches that are needed support multiple requests per page group. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-15 23:56:45 +08:00
extern void nfs_unlock_and_release_request(struct nfs_page *);
extern int nfs_page_group_lock(struct nfs_page *);
nfs: add support for multiple nfs reqs per page Add "page groups" - a circular list of nfs requests (struct nfs_page) that all reference the same page. This gives nfs read and write paths the ability to account for sub-page regions independently. This somewhat follows the design of struct buffer_head's sub-page accounting. Only "head" requests are ever added/removed from the inode list in the buffered write path. "head" and "sub" requests are treated the same through the read path and the rest of the write/commit path. Requests are given an extra reference across the life of the list. Page groups are never rejoined after being split. If the read/write request fails and the client falls back to another path (ie revert to MDS in PNFS case), the already split requests are pushed through the recoalescing code again, which may split them further and then coalesce them into properly sized requests on the wire. Fragmentation shouldn't be a problem with the current design, because we flush all requests in page group when a non-contiguous request is added, so the only time resplitting should occur is on a resend of a read or write. This patch lays the groundwork for sub-page splitting, but does not actually do any splitting. For now all page groups have one request as pg_test functions don't yet split pages. There are several related patches that are needed support multiple requests per page group. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-15 23:56:45 +08:00
extern void nfs_page_group_unlock(struct nfs_page *);
extern bool nfs_page_group_sync_on_bit(struct nfs_page *, unsigned int);
extern bool nfs_async_iocounter_wait(struct rpc_task *, struct nfs_lock_context *);
/*
* Lock the page of an asynchronous request
*/
static inline int
nfs_lock_request(struct nfs_page *req)
{
return !test_and_set_bit(PG_BUSY, &req->wb_flags);
}
/**
* nfs_list_add_request - Insert a request into a list
* @req: request
* @head: head of list into which to insert the request.
*/
static inline void
nfs_list_add_request(struct nfs_page *req, struct list_head *head)
{
list_add_tail(&req->wb_list, head);
}
/**
* nfs_list_remove_request - Remove a request from its wb_list
* @req: request
*/
static inline void
nfs_list_remove_request(struct nfs_page *req)
{
if (list_empty(&req->wb_list))
return;
list_del_init(&req->wb_list);
}
static inline struct nfs_page *
nfs_list_entry(struct list_head *head)
{
return list_entry(head, struct nfs_page, wb_list);
}
static inline
loff_t req_offset(struct nfs_page *req)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
return (((loff_t)req->wb_index) << PAGE_SHIFT) + req->wb_offset;
}
#endif /* _LINUX_NFS_PAGE_H */