UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/linux/amba/bus.h

86 lines
2.4 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
ARM: 5951/1: ARM: fix documentation of the PrimeCell bus This fixes the filepath encoded in <linux/amba/bus.h> and adds some documentation as to what this bus really means. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:41:30 +08:00
* linux/include/amba/bus.h
*
* This device type deals with ARM PrimeCells and anything else that
* presents a proper CID (0xB105F00D) at the end of the I/O register
* region or that is derived from a PrimeCell.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef ASMARM_AMBA_H
#define ASMARM_AMBA_H
ARM: AMBA: Add pclk support to AMBA bus infrastructure Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15 17:47:14 +08:00
#include <linux/clk.h>
ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h linux/amba/bus.h have dependencies on linux/device.h and linux/resource.h, but it doesn't include them. We get compilation errors in our files which include bus.h but doesn't include device.h and resource.h. This patch includes device.h and resource.h in linux/amba/bus.h file. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linux Walleij <linux.ml.walleij@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 12:28:32 +08:00
#include <linux/device.h>
ARM: AMBA: Add pclk support to AMBA bus infrastructure Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15 17:47:14 +08:00
#include <linux/err.h>
ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h linux/amba/bus.h have dependencies on linux/device.h and linux/resource.h, but it doesn't include them. We get compilation errors in our files which include bus.h but doesn't include device.h and resource.h. This patch includes device.h and resource.h in linux/amba/bus.h file. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linux Walleij <linux.ml.walleij@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 12:28:32 +08:00
#include <linux/resource.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define AMBA_NR_IRQS 2
ARM: 6368/1: move the PrimeCell IDs to use macros This make four macros for the PrimeCell ID register available to drivers that use them witout using the PrimeCell/AMBA bus abstraction and struct amba_device. It also moves the magic PrimeCell CID "B105F00D" to the bus.h header file. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08 05:43:19 +08:00
#define AMBA_CID 0xb105f00d
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: AMBA: Add pclk support to AMBA bus infrastructure Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15 17:47:14 +08:00
struct clk;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct amba_device {
struct device dev;
struct resource res;
ARM: AMBA: Add pclk support to AMBA bus infrastructure Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15 17:47:14 +08:00
struct clk *pclk;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u64 dma_mask;
unsigned int periphid;
unsigned int irq[AMBA_NR_IRQS];
};
struct amba_id {
unsigned int id;
unsigned int mask;
void *data;
};
struct amba_driver {
struct device_driver drv;
[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void * The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 05:39:08 +08:00
int (*probe)(struct amba_device *, struct amba_id *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
int (*suspend)(struct amba_device *, pm_message_t);
int (*resume)(struct amba_device *);
struct amba_id *id_table;
};
ARM: 5636/1: Move vendor enum to AMBA include This moves the primecell vendor enum definition inside vic.c out to linux/amba/bus.h where it belongs and replace any occurances of specific vendor ID:s with the respective enums instead. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-04 08:01:02 +08:00
enum amba_vendor {
AMBA_VENDOR_ARM = 0x41,
AMBA_VENDOR_ST = 0x80,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
#define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
int amba_driver_register(struct amba_driver *);
void amba_driver_unregister(struct amba_driver *);
int amba_device_register(struct amba_device *, struct resource *);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
int amba_request_regions(struct amba_device *, const char *);
void amba_release_regions(struct amba_device *);
ARM: AMBA: Add pclk support to AMBA bus infrastructure Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15 17:47:14 +08:00
#define amba_pclk_enable(d) \
(IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
#define amba_pclk_disable(d) \
do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
ARM: 6368/1: move the PrimeCell IDs to use macros This make four macros for the PrimeCell ID register available to drivers that use them witout using the PrimeCell/AMBA bus abstraction and struct amba_device. It also moves the magic PrimeCell CID "B105F00D" to the bus.h header file. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08 05:43:19 +08:00
/* Some drivers don't use the struct amba_device */
#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
#define AMBA_PART_BITS(a) ((a) & 0xfff)
#define amba_config(d) AMBA_CONFIG_BITS((d)->periphid)
#define amba_rev(d) AMBA_REV_BITS((d)->periphid)
#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
#define amba_part(d) AMBA_PART_BITS((d)->periphid)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif