227 lines
4.8 KiB
C
227 lines
4.8 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* MAX1241 low-power, 12-bit serial ADC
|
||
|
*
|
||
|
* Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
|
||
|
*/
|
||
|
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <linux/iio/iio.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
#include <linux/spi/spi.h>
|
||
|
|
||
|
#define MAX1241_VAL_MASK GENMASK(11, 0)
|
||
|
#define MAX1241_SHUTDOWN_DELAY_USEC 4
|
||
|
|
||
|
enum max1241_id {
|
||
|
max1241,
|
||
|
};
|
||
|
|
||
|
struct max1241 {
|
||
|
struct spi_device *spi;
|
||
|
struct mutex lock;
|
||
|
struct regulator *vdd;
|
||
|
struct regulator *vref;
|
||
|
struct gpio_desc *shutdown;
|
||
|
|
||
|
__be16 data ____cacheline_aligned;
|
||
|
};
|
||
|
|
||
|
static const struct iio_chan_spec max1241_channels[] = {
|
||
|
{
|
||
|
.type = IIO_VOLTAGE,
|
||
|
.indexed = 1,
|
||
|
.channel = 0,
|
||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||
|
BIT(IIO_CHAN_INFO_SCALE),
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static int max1241_read(struct max1241 *adc)
|
||
|
{
|
||
|
struct spi_transfer xfers[] = {
|
||
|
/*
|
||
|
* Begin conversion by bringing /CS low for at least
|
||
|
* tconv us.
|
||
|
*/
|
||
|
{
|
||
|
.len = 0,
|
||
|
.delay.value = 8,
|
||
|
.delay.unit = SPI_DELAY_UNIT_USECS,
|
||
|
},
|
||
|
/*
|
||
|
* Then read two bytes of data in our RX buffer.
|
||
|
*/
|
||
|
{
|
||
|
.rx_buf = &adc->data,
|
||
|
.len = 2,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
|
||
|
}
|
||
|
|
||
|
static int max1241_read_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int *val, int *val2, long mask)
|
||
|
{
|
||
|
int ret, vref_uV;
|
||
|
struct max1241 *adc = iio_priv(indio_dev);
|
||
|
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
mutex_lock(&adc->lock);
|
||
|
|
||
|
if (adc->shutdown) {
|
||
|
gpiod_set_value(adc->shutdown, 0);
|
||
|
udelay(MAX1241_SHUTDOWN_DELAY_USEC);
|
||
|
ret = max1241_read(adc);
|
||
|
gpiod_set_value(adc->shutdown, 1);
|
||
|
} else
|
||
|
ret = max1241_read(adc);
|
||
|
|
||
|
if (ret) {
|
||
|
mutex_unlock(&adc->lock);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
*val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
|
||
|
|
||
|
mutex_unlock(&adc->lock);
|
||
|
return IIO_VAL_INT;
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
vref_uV = regulator_get_voltage(adc->vref);
|
||
|
|
||
|
if (vref_uV < 0)
|
||
|
return vref_uV;
|
||
|
|
||
|
*val = vref_uV / 1000;
|
||
|
*val2 = 12;
|
||
|
|
||
|
return IIO_VAL_FRACTIONAL_LOG2;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static const struct iio_info max1241_info = {
|
||
|
.read_raw = max1241_read_raw,
|
||
|
};
|
||
|
|
||
|
static void max1241_disable_vdd_action(void *data)
|
||
|
{
|
||
|
struct max1241 *adc = data;
|
||
|
struct device *dev = &adc->spi->dev;
|
||
|
int err;
|
||
|
|
||
|
err = regulator_disable(adc->vdd);
|
||
|
if (err)
|
||
|
dev_err(dev, "could not disable vdd regulator.\n");
|
||
|
}
|
||
|
|
||
|
static void max1241_disable_vref_action(void *data)
|
||
|
{
|
||
|
struct max1241 *adc = data;
|
||
|
struct device *dev = &adc->spi->dev;
|
||
|
int err;
|
||
|
|
||
|
err = regulator_disable(adc->vref);
|
||
|
if (err)
|
||
|
dev_err(dev, "could not disable vref regulator.\n");
|
||
|
}
|
||
|
|
||
|
static int max1241_probe(struct spi_device *spi)
|
||
|
{
|
||
|
struct device *dev = &spi->dev;
|
||
|
struct iio_dev *indio_dev;
|
||
|
struct max1241 *adc;
|
||
|
int ret;
|
||
|
|
||
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
|
||
|
if (!indio_dev)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
adc = iio_priv(indio_dev);
|
||
|
adc->spi = spi;
|
||
|
mutex_init(&adc->lock);
|
||
|
|
||
|
spi_set_drvdata(spi, indio_dev);
|
||
|
|
||
|
adc->vdd = devm_regulator_get(dev, "vdd");
|
||
|
if (IS_ERR(adc->vdd)) {
|
||
|
dev_err(dev, "failed to get vdd regulator\n");
|
||
|
return PTR_ERR(adc->vdd);
|
||
|
}
|
||
|
|
||
|
ret = regulator_enable(adc->vdd);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = devm_add_action_or_reset(dev, max1241_disable_vdd_action, adc);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "could not set up vdd regulator cleanup action\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
adc->vref = devm_regulator_get(dev, "vref");
|
||
|
if (IS_ERR(adc->vref)) {
|
||
|
dev_err(dev, "failed to get vref regulator\n");
|
||
|
return PTR_ERR(adc->vref);
|
||
|
}
|
||
|
|
||
|
ret = regulator_enable(adc->vref);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = devm_add_action_or_reset(dev, max1241_disable_vref_action, adc);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "could not set up vref regulator cleanup action\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
adc->shutdown = devm_gpiod_get_optional(dev, "shutdown",
|
||
|
GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(adc->shutdown))
|
||
|
return PTR_ERR(adc->shutdown);
|
||
|
|
||
|
if (adc->shutdown)
|
||
|
dev_dbg(dev, "shutdown pin passed, low-power mode enabled");
|
||
|
else
|
||
|
dev_dbg(dev, "no shutdown pin passed, low-power mode disabled");
|
||
|
|
||
|
indio_dev->name = spi_get_device_id(spi)->name;
|
||
|
indio_dev->info = &max1241_info;
|
||
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
||
|
indio_dev->channels = max1241_channels;
|
||
|
indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
|
||
|
|
||
|
return devm_iio_device_register(dev, indio_dev);
|
||
|
}
|
||
|
|
||
|
static const struct spi_device_id max1241_id[] = {
|
||
|
{ "max1241", max1241 },
|
||
|
{}
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id max1241_dt_ids[] = {
|
||
|
{ .compatible = "maxim,max1241" },
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, max1241_dt_ids);
|
||
|
|
||
|
static struct spi_driver max1241_spi_driver = {
|
||
|
.driver = {
|
||
|
.name = "max1241",
|
||
|
.of_match_table = max1241_dt_ids,
|
||
|
},
|
||
|
.probe = max1241_probe,
|
||
|
.id_table = max1241_id,
|
||
|
};
|
||
|
module_spi_driver(max1241_spi_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
|
||
|
MODULE_DESCRIPTION("MAX1241 ADC driver");
|
||
|
MODULE_LICENSE("GPL v2");
|