OpenCloudOS-Kernel/include/linux/wait.h

1227 lines
41 KiB
C
Raw Normal View History

#ifndef _LINUX_WAIT_H
#define _LINUX_WAIT_H
/*
* Linux wait queue related types and methods
*/
#include <linux/list.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <asm/current.h>
#include <uapi/linux/wait.h>
typedef struct __wait_queue wait_queue_t;
typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
int default_wake_function(wait_queue_t *wait, unsigned mode, int flags, void *key);
/* __wait_queue::flags */
#define WQ_FLAG_EXCLUSIVE 0x01
#define WQ_FLAG_WOKEN 0x02
struct __wait_queue {
unsigned int flags;
void *private;
wait_queue_func_t func;
struct list_head task_list;
};
struct wait_bit_key {
void *flags;
int bit_nr;
#define WAIT_ATOMIC_T_BIT_NR -1
unsigned long timeout;
};
struct wait_bit_queue {
struct wait_bit_key key;
wait_queue_t wait;
};
struct __wait_queue_head {
spinlock_t lock;
struct list_head task_list;
};
typedef struct __wait_queue_head wait_queue_head_t;
struct task_struct;
/*
* Macros for declaration and initialisaton of the datatypes
*/
#define __WAITQUEUE_INITIALIZER(name, tsk) { \
.private = tsk, \
.func = default_wake_function, \
.task_list = { NULL, NULL } }
#define DECLARE_WAITQUEUE(name, tsk) \
wait_queue_t name = __WAITQUEUE_INITIALIZER(name, tsk)
#define __WAIT_QUEUE_HEAD_INITIALIZER(name) { \
.lock = __SPIN_LOCK_UNLOCKED(name.lock), \
.task_list = { &(name).task_list, &(name).task_list } }
#define DECLARE_WAIT_QUEUE_HEAD(name) \
wait_queue_head_t name = __WAIT_QUEUE_HEAD_INITIALIZER(name)
#define __WAIT_BIT_KEY_INITIALIZER(word, bit) \
{ .flags = word, .bit_nr = bit, }
Add wait_on_atomic_t() and wake_up_atomic_t() Add wait_on_atomic_t() and wake_up_atomic_t() to indicate became-zero events on atomic_t types. This uses the bit-wake waitqueue table. The key is set to a value outside of the number of bits in a long so that wait_on_bit() won't be woken up accidentally. What I'm using this for is: in a following patch I add a counter to struct fscache_cookie to count the number of outstanding operations that need access to netfs data. The way this works is: (1) When a cookie is allocated, the counter is initialised to 1. (2) When an operation wants to access netfs data, it calls atomic_inc_unless() to increment the counter before it does so. If it was 0, then the counter isn't incremented, the operation isn't permitted to access the netfs data (which might by this point no longer exist) and the operation aborts in some appropriate manner. (3) When an operation finishes with the netfs data, it decrements the counter and if it reaches 0, calls wake_up_atomic_t() on it - the assumption being that it was the last blocker. (4) When a cookie is released, the counter is decremented and the releaser uses wait_on_atomic_t() to wait for the counter to become 0 - which should indicate no one is using the netfs data any longer. The netfs data can then be destroyed. There are some alternatives that I have thought of and that have been suggested by Tejun Heo: (A) Using wait_on_bit() to wait on a bit in the counter. This doesn't work because if that bit happens to be 0 then the wait won't happen - even if the counter is non-zero. (B) Using wait_on_bit() to wait on a flag elsewhere which is cleared when the counter reaches 0. Such a flag would be redundant and would add complexity. (C) Adding a waitqueue to fscache_cookie - this would expand that struct by several words for an event that happens just once in each cookie's lifetime. Further, cookies are generally per-file so there are likely to be a lot of them. (D) Similar to (C), but add a pointer to a waitqueue in the cookie instead of a waitqueue. This would add single word per cookie and so would be less of an expansion - but still an expansion. (E) Adding a static waitqueue to the fscache module. Generally this would be fine, but under certain circumstances many cookies will all get added at the same time (eg. NFS umount, cache withdrawal) thereby presenting scaling issues. Note that the wait may be significant as disk I/O may be in progress. So, I think reusing the wait_on_bit() waitqueue set is reasonable. I don't make much use of the waitqueue I need on a per-cookie basis, but sometimes I have a huge flood of the cookies to deal with. I also don't want to add a whole new set of global waitqueue tables specifically for the dec-to-0 event if I can reuse the bit tables. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Milosz Tanski <milosz@adfin.com> Acked-by: Jeff Layton <jlayton@redhat.com>
2013-05-11 02:50:26 +08:00
#define __WAIT_ATOMIC_T_KEY_INITIALIZER(p) \
{ .flags = p, .bit_nr = WAIT_ATOMIC_T_BIT_NR, }
extern void __init_waitqueue_head(wait_queue_head_t *q, const char *name, struct lock_class_key *);
#define init_waitqueue_head(q) \
do { \
static struct lock_class_key __key; \
\
__init_waitqueue_head((q), #q, &__key); \
} while (0)
#ifdef CONFIG_LOCKDEP
# define __WAIT_QUEUE_HEAD_INIT_ONSTACK(name) \
({ init_waitqueue_head(&name); name; })
# define DECLARE_WAIT_QUEUE_HEAD_ONSTACK(name) \
wait_queue_head_t name = __WAIT_QUEUE_HEAD_INIT_ONSTACK(name)
#else
# define DECLARE_WAIT_QUEUE_HEAD_ONSTACK(name) DECLARE_WAIT_QUEUE_HEAD(name)
#endif
static inline void init_waitqueue_entry(wait_queue_t *q, struct task_struct *p)
{
q->flags = 0;
q->private = p;
q->func = default_wake_function;
}
static inline void
init_waitqueue_func_entry(wait_queue_t *q, wait_queue_func_t func)
{
q->flags = 0;
q->private = NULL;
q->func = func;
}
/**
* waitqueue_active -- locklessly test for waiters on the queue
* @q: the waitqueue to test for waiters
*
* returns true if the wait list is not empty
*
* NOTE: this function is lockless and requires care, incorrect usage _will_
* lead to sporadic and non-obvious failure.
*
* Use either while holding wait_queue_head_t::lock or when used for wakeups
* with an extra smp_mb() like:
*
* CPU0 - waker CPU1 - waiter
*
* for (;;) {
* @cond = true; prepare_to_wait(&wq, &wait, state);
* smp_mb(); // smp_mb() from set_current_state()
* if (waitqueue_active(wq)) if (@cond)
* wake_up(wq); break;
* schedule();
* }
* finish_wait(&wq, &wait);
*
* Because without the explicit smp_mb() it's possible for the
* waitqueue_active() load to get hoisted over the @cond store such that we'll
* observe an empty wait list while the waiter might not observe @cond.
*
* Also note that this 'optimization' trades a spin_lock() for an smp_mb(),
* which (when the lock is uncontended) are of roughly equal cost.
*/
static inline int waitqueue_active(wait_queue_head_t *q)
{
return !list_empty(&q->task_list);
}
/**
* wq_has_sleeper - check if there are any waiting processes
* @wq: wait queue head
*
* Returns true if wq has waiting processes
*
* Please refer to the comment for waitqueue_active.
*/
static inline bool wq_has_sleeper(wait_queue_head_t *wq)
{
/*
* We need to be sure we are in sync with the
* add_wait_queue modifications to the wait queue.
*
* This memory barrier should be paired with one on the
* waiting side.
*/
smp_mb();
return waitqueue_active(wq);
}
extern void add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait);
extern void add_wait_queue_exclusive(wait_queue_head_t *q, wait_queue_t *wait);
extern void remove_wait_queue(wait_queue_head_t *q, wait_queue_t *wait);
static inline void __add_wait_queue(wait_queue_head_t *head, wait_queue_t *new)
{
list_add(&new->task_list, &head->task_list);
}
/*
* Used for wake-one threads:
*/
static inline void
__add_wait_queue_exclusive(wait_queue_head_t *q, wait_queue_t *wait)
{
wait->flags |= WQ_FLAG_EXCLUSIVE;
__add_wait_queue(q, wait);
}
static inline void __add_wait_queue_tail(wait_queue_head_t *head,
wait_queue_t *new)
{
list_add_tail(&new->task_list, &head->task_list);
}
static inline void
__add_wait_queue_tail_exclusive(wait_queue_head_t *q, wait_queue_t *wait)
{
wait->flags |= WQ_FLAG_EXCLUSIVE;
__add_wait_queue_tail(q, wait);
}
static inline void
__remove_wait_queue(wait_queue_head_t *head, wait_queue_t *old)
{
list_del(&old->task_list);
}
typedef int wait_bit_action_f(struct wait_bit_key *, int mode);
void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key);
void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
void __wake_up_locked(wait_queue_head_t *q, unsigned int mode, int nr);
epoll keyed wakeups: add __wake_up_locked_key() and __wake_up_sync_key() This patchset introduces wakeup hints for some of the most popular (from epoll POV) devices, so that epoll code can avoid spurious wakeups on its waiters. The problem with epoll is that the callback-based wakeups do not, ATM, carry any information about the events the wakeup is related to. So the only choice epoll has (not being able to call f_op->poll() from inside the callback), is to add the file* to a ready-list and resolve the real events later on, at epoll_wait() (or its own f_op->poll()) time. This can cause spurious wakeups, since the wake_up() itself might be for an event the caller is not interested into. The rate of these spurious wakeup can be pretty high in case of many network sockets being monitored. By allowing devices to report the events the wakeups refer to (at least the two major classes - POLLIN/POLLOUT), we are able to spare useless wakeups by proper handling inside the epoll's poll callback. Epoll will have in any case to call f_op->poll() on the file* later on, since the change to be done in order to have the full event set sent via wakeup, is too invasive for the way our f_op->poll() system works (the full event set is calculated inside the poll function - there are too many of them to even start thinking the change - also poll/select would need change too). Epoll is changed in a way that both devices which send event hints, and the ones that don't, are correctly handled. The former will gain some efficiency though. As a general rule for devices, would be to add an event mask by using key-aware wakeup macros, when making up poll wait queues. I tested it (together with the epoll's poll fix patch Andrew has in -mm) and wakeups for the supported devices are correctly filtered. Test program available here: http://www.xmailserver.org/epoll_test.c This patch: Nothing revolutionary here. Just using the available "key" that our wakeup core already support. The __wake_up_locked_key() was no brainer, since both __wake_up_locked() and __wake_up_locked_key() are thin wrappers around __wake_up_common(). The __wake_up_sync() function had a body, so the choice was between borrowing the body for __wake_up_sync_key() and calling it from __wake_up_sync(), or make an inline and calling it from both. I chose the former since in most archs it all resolves to "mov $0, REG; jmp ADDR". Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:24:20 +08:00
void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr);
void __wake_up_bit(wait_queue_head_t *, void *, int);
sched: Allow wait_on_bit_action() functions to support a timeout It is currently not possible for various wait_on_bit functions to implement a timeout. While the "action" function that is called to do the waiting could certainly use schedule_timeout(), there is no way to carry forward the remaining timeout after a false wake-up. As false-wakeups a clearly possible at least due to possible hash collisions in bit_waitqueue(), this is a real problem. The 'action' function is currently passed a pointer to the word containing the bit being waited on. No current action functions use this pointer. So changing it to something else will be a little noisy but will have no immediate effect. This patch changes the 'action' function to take a pointer to the "struct wait_bit_key", which contains a pointer to the word containing the bit so nothing is really lost. It also adds a 'private' field to "struct wait_bit_key", which is initialized to zero. An action function can now implement a timeout with something like static int timed_out_waiter(struct wait_bit_key *key) { unsigned long waited; if (key->private == 0) { key->private = jiffies; if (key->private == 0) key->private -= 1; } waited = jiffies - key->private; if (waited > 10 * HZ) return -EAGAIN; schedule_timeout(waited - 10 * HZ); return 0; } If any other need for context in a waiter were found it would be easy to use ->private for some other purpose, or even extend "struct wait_bit_key". My particular need is to support timeouts in nfs_release_page() to avoid deadlocks with loopback mounted NFS. While wait_on_bit_timeout() would be a cleaner interface, it will not meet my need. I need the timeout to be sensitive to the state of the connection with the server, which could change. So I need to use an 'action' interface. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: David Howells <dhowells@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
int __wait_on_bit(wait_queue_head_t *, struct wait_bit_queue *, wait_bit_action_f *, unsigned);
int __wait_on_bit_lock(wait_queue_head_t *, struct wait_bit_queue *, wait_bit_action_f *, unsigned);
void wake_up_bit(void *, int);
Add wait_on_atomic_t() and wake_up_atomic_t() Add wait_on_atomic_t() and wake_up_atomic_t() to indicate became-zero events on atomic_t types. This uses the bit-wake waitqueue table. The key is set to a value outside of the number of bits in a long so that wait_on_bit() won't be woken up accidentally. What I'm using this for is: in a following patch I add a counter to struct fscache_cookie to count the number of outstanding operations that need access to netfs data. The way this works is: (1) When a cookie is allocated, the counter is initialised to 1. (2) When an operation wants to access netfs data, it calls atomic_inc_unless() to increment the counter before it does so. If it was 0, then the counter isn't incremented, the operation isn't permitted to access the netfs data (which might by this point no longer exist) and the operation aborts in some appropriate manner. (3) When an operation finishes with the netfs data, it decrements the counter and if it reaches 0, calls wake_up_atomic_t() on it - the assumption being that it was the last blocker. (4) When a cookie is released, the counter is decremented and the releaser uses wait_on_atomic_t() to wait for the counter to become 0 - which should indicate no one is using the netfs data any longer. The netfs data can then be destroyed. There are some alternatives that I have thought of and that have been suggested by Tejun Heo: (A) Using wait_on_bit() to wait on a bit in the counter. This doesn't work because if that bit happens to be 0 then the wait won't happen - even if the counter is non-zero. (B) Using wait_on_bit() to wait on a flag elsewhere which is cleared when the counter reaches 0. Such a flag would be redundant and would add complexity. (C) Adding a waitqueue to fscache_cookie - this would expand that struct by several words for an event that happens just once in each cookie's lifetime. Further, cookies are generally per-file so there are likely to be a lot of them. (D) Similar to (C), but add a pointer to a waitqueue in the cookie instead of a waitqueue. This would add single word per cookie and so would be less of an expansion - but still an expansion. (E) Adding a static waitqueue to the fscache module. Generally this would be fine, but under certain circumstances many cookies will all get added at the same time (eg. NFS umount, cache withdrawal) thereby presenting scaling issues. Note that the wait may be significant as disk I/O may be in progress. So, I think reusing the wait_on_bit() waitqueue set is reasonable. I don't make much use of the waitqueue I need on a per-cookie basis, but sometimes I have a huge flood of the cookies to deal with. I also don't want to add a whole new set of global waitqueue tables specifically for the dec-to-0 event if I can reuse the bit tables. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Milosz Tanski <milosz@adfin.com> Acked-by: Jeff Layton <jlayton@redhat.com>
2013-05-11 02:50:26 +08:00
void wake_up_atomic_t(atomic_t *);
sched: Allow wait_on_bit_action() functions to support a timeout It is currently not possible for various wait_on_bit functions to implement a timeout. While the "action" function that is called to do the waiting could certainly use schedule_timeout(), there is no way to carry forward the remaining timeout after a false wake-up. As false-wakeups a clearly possible at least due to possible hash collisions in bit_waitqueue(), this is a real problem. The 'action' function is currently passed a pointer to the word containing the bit being waited on. No current action functions use this pointer. So changing it to something else will be a little noisy but will have no immediate effect. This patch changes the 'action' function to take a pointer to the "struct wait_bit_key", which contains a pointer to the word containing the bit so nothing is really lost. It also adds a 'private' field to "struct wait_bit_key", which is initialized to zero. An action function can now implement a timeout with something like static int timed_out_waiter(struct wait_bit_key *key) { unsigned long waited; if (key->private == 0) { key->private = jiffies; if (key->private == 0) key->private -= 1; } waited = jiffies - key->private; if (waited > 10 * HZ) return -EAGAIN; schedule_timeout(waited - 10 * HZ); return 0; } If any other need for context in a waiter were found it would be easy to use ->private for some other purpose, or even extend "struct wait_bit_key". My particular need is to support timeouts in nfs_release_page() to avoid deadlocks with loopback mounted NFS. While wait_on_bit_timeout() would be a cleaner interface, it will not meet my need. I need the timeout to be sensitive to the state of the connection with the server, which could change. So I need to use an 'action' interface. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: David Howells <dhowells@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
int out_of_line_wait_on_bit(void *, int, wait_bit_action_f *, unsigned);
int out_of_line_wait_on_bit_timeout(void *, int, wait_bit_action_f *, unsigned, unsigned long);
sched: Allow wait_on_bit_action() functions to support a timeout It is currently not possible for various wait_on_bit functions to implement a timeout. While the "action" function that is called to do the waiting could certainly use schedule_timeout(), there is no way to carry forward the remaining timeout after a false wake-up. As false-wakeups a clearly possible at least due to possible hash collisions in bit_waitqueue(), this is a real problem. The 'action' function is currently passed a pointer to the word containing the bit being waited on. No current action functions use this pointer. So changing it to something else will be a little noisy but will have no immediate effect. This patch changes the 'action' function to take a pointer to the "struct wait_bit_key", which contains a pointer to the word containing the bit so nothing is really lost. It also adds a 'private' field to "struct wait_bit_key", which is initialized to zero. An action function can now implement a timeout with something like static int timed_out_waiter(struct wait_bit_key *key) { unsigned long waited; if (key->private == 0) { key->private = jiffies; if (key->private == 0) key->private -= 1; } waited = jiffies - key->private; if (waited > 10 * HZ) return -EAGAIN; schedule_timeout(waited - 10 * HZ); return 0; } If any other need for context in a waiter were found it would be easy to use ->private for some other purpose, or even extend "struct wait_bit_key". My particular need is to support timeouts in nfs_release_page() to avoid deadlocks with loopback mounted NFS. While wait_on_bit_timeout() would be a cleaner interface, it will not meet my need. I need the timeout to be sensitive to the state of the connection with the server, which could change. So I need to use an 'action' interface. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: David Howells <dhowells@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
int out_of_line_wait_on_bit_lock(void *, int, wait_bit_action_f *, unsigned);
Add wait_on_atomic_t() and wake_up_atomic_t() Add wait_on_atomic_t() and wake_up_atomic_t() to indicate became-zero events on atomic_t types. This uses the bit-wake waitqueue table. The key is set to a value outside of the number of bits in a long so that wait_on_bit() won't be woken up accidentally. What I'm using this for is: in a following patch I add a counter to struct fscache_cookie to count the number of outstanding operations that need access to netfs data. The way this works is: (1) When a cookie is allocated, the counter is initialised to 1. (2) When an operation wants to access netfs data, it calls atomic_inc_unless() to increment the counter before it does so. If it was 0, then the counter isn't incremented, the operation isn't permitted to access the netfs data (which might by this point no longer exist) and the operation aborts in some appropriate manner. (3) When an operation finishes with the netfs data, it decrements the counter and if it reaches 0, calls wake_up_atomic_t() on it - the assumption being that it was the last blocker. (4) When a cookie is released, the counter is decremented and the releaser uses wait_on_atomic_t() to wait for the counter to become 0 - which should indicate no one is using the netfs data any longer. The netfs data can then be destroyed. There are some alternatives that I have thought of and that have been suggested by Tejun Heo: (A) Using wait_on_bit() to wait on a bit in the counter. This doesn't work because if that bit happens to be 0 then the wait won't happen - even if the counter is non-zero. (B) Using wait_on_bit() to wait on a flag elsewhere which is cleared when the counter reaches 0. Such a flag would be redundant and would add complexity. (C) Adding a waitqueue to fscache_cookie - this would expand that struct by several words for an event that happens just once in each cookie's lifetime. Further, cookies are generally per-file so there are likely to be a lot of them. (D) Similar to (C), but add a pointer to a waitqueue in the cookie instead of a waitqueue. This would add single word per cookie and so would be less of an expansion - but still an expansion. (E) Adding a static waitqueue to the fscache module. Generally this would be fine, but under certain circumstances many cookies will all get added at the same time (eg. NFS umount, cache withdrawal) thereby presenting scaling issues. Note that the wait may be significant as disk I/O may be in progress. So, I think reusing the wait_on_bit() waitqueue set is reasonable. I don't make much use of the waitqueue I need on a per-cookie basis, but sometimes I have a huge flood of the cookies to deal with. I also don't want to add a whole new set of global waitqueue tables specifically for the dec-to-0 event if I can reuse the bit tables. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Milosz Tanski <milosz@adfin.com> Acked-by: Jeff Layton <jlayton@redhat.com>
2013-05-11 02:50:26 +08:00
int out_of_line_wait_on_atomic_t(atomic_t *, int (*)(atomic_t *), unsigned);
wait_queue_head_t *bit_waitqueue(void *, int);
#define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL)
#define wake_up_nr(x, nr) __wake_up(x, TASK_NORMAL, nr, NULL)
#define wake_up_all(x) __wake_up(x, TASK_NORMAL, 0, NULL)
#define wake_up_locked(x) __wake_up_locked((x), TASK_NORMAL, 1)
#define wake_up_all_locked(x) __wake_up_locked((x), TASK_NORMAL, 0)
#define wake_up_interruptible(x) __wake_up(x, TASK_INTERRUPTIBLE, 1, NULL)
#define wake_up_interruptible_nr(x, nr) __wake_up(x, TASK_INTERRUPTIBLE, nr, NULL)
#define wake_up_interruptible_all(x) __wake_up(x, TASK_INTERRUPTIBLE, 0, NULL)
#define wake_up_interruptible_sync(x) __wake_up_sync((x), TASK_INTERRUPTIBLE, 1)
lockdep: annotate epoll On Sat, 2008-01-05 at 13:35 -0800, Davide Libenzi wrote: > I remember I talked with Arjan about this time ago. Basically, since 1) > you can drop an epoll fd inside another epoll fd 2) callback-based wakeups > are used, you can see a wake_up() from inside another wake_up(), but they > will never refer to the same lock instance. > Think about: > > dfd = socket(...); > efd1 = epoll_create(); > efd2 = epoll_create(); > epoll_ctl(efd1, EPOLL_CTL_ADD, dfd, ...); > epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...); > > When a packet arrives to the device underneath "dfd", the net code will > issue a wake_up() on its poll wake list. Epoll (efd1) has installed a > callback wakeup entry on that queue, and the wake_up() performed by the > "dfd" net code will end up in ep_poll_callback(). At this point epoll > (efd1) notices that it may have some event ready, so it needs to wake up > the waiters on its poll wait list (efd2). So it calls ep_poll_safewake() > that ends up in another wake_up(), after having checked about the > recursion constraints. That are, no more than EP_MAX_POLLWAKE_NESTS, to > avoid stack blasting. Never hit the same queue, to avoid loops like: > > epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...); > epoll_ctl(efd3, EPOLL_CTL_ADD, efd2, ...); > epoll_ctl(efd4, EPOLL_CTL_ADD, efd3, ...); > epoll_ctl(efd1, EPOLL_CTL_ADD, efd4, ...); > > The code "if (tncur->wq == wq || ..." prevents re-entering the same > queue/lock. Since the epoll code is very careful to not nest same instance locks allow the recursion. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:27:20 +08:00
/*
* Wakeup macros to be used to report events to the targets.
lockdep: annotate epoll On Sat, 2008-01-05 at 13:35 -0800, Davide Libenzi wrote: > I remember I talked with Arjan about this time ago. Basically, since 1) > you can drop an epoll fd inside another epoll fd 2) callback-based wakeups > are used, you can see a wake_up() from inside another wake_up(), but they > will never refer to the same lock instance. > Think about: > > dfd = socket(...); > efd1 = epoll_create(); > efd2 = epoll_create(); > epoll_ctl(efd1, EPOLL_CTL_ADD, dfd, ...); > epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...); > > When a packet arrives to the device underneath "dfd", the net code will > issue a wake_up() on its poll wake list. Epoll (efd1) has installed a > callback wakeup entry on that queue, and the wake_up() performed by the > "dfd" net code will end up in ep_poll_callback(). At this point epoll > (efd1) notices that it may have some event ready, so it needs to wake up > the waiters on its poll wait list (efd2). So it calls ep_poll_safewake() > that ends up in another wake_up(), after having checked about the > recursion constraints. That are, no more than EP_MAX_POLLWAKE_NESTS, to > avoid stack blasting. Never hit the same queue, to avoid loops like: > > epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...); > epoll_ctl(efd3, EPOLL_CTL_ADD, efd2, ...); > epoll_ctl(efd4, EPOLL_CTL_ADD, efd3, ...); > epoll_ctl(efd1, EPOLL_CTL_ADD, efd4, ...); > > The code "if (tncur->wq == wq || ..." prevents re-entering the same > queue/lock. Since the epoll code is very careful to not nest same instance locks allow the recursion. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:27:20 +08:00
*/
#define wake_up_poll(x, m) \
__wake_up(x, TASK_NORMAL, 1, (void *) (m))
#define wake_up_locked_poll(x, m) \
__wake_up_locked_key((x), TASK_NORMAL, (void *) (m))
#define wake_up_interruptible_poll(x, m) \
__wake_up(x, TASK_INTERRUPTIBLE, 1, (void *) (m))
#define wake_up_interruptible_sync_poll(x, m) \
__wake_up_sync_key((x), TASK_INTERRUPTIBLE, 1, (void *) (m))
lockdep: annotate epoll On Sat, 2008-01-05 at 13:35 -0800, Davide Libenzi wrote: > I remember I talked with Arjan about this time ago. Basically, since 1) > you can drop an epoll fd inside another epoll fd 2) callback-based wakeups > are used, you can see a wake_up() from inside another wake_up(), but they > will never refer to the same lock instance. > Think about: > > dfd = socket(...); > efd1 = epoll_create(); > efd2 = epoll_create(); > epoll_ctl(efd1, EPOLL_CTL_ADD, dfd, ...); > epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...); > > When a packet arrives to the device underneath "dfd", the net code will > issue a wake_up() on its poll wake list. Epoll (efd1) has installed a > callback wakeup entry on that queue, and the wake_up() performed by the > "dfd" net code will end up in ep_poll_callback(). At this point epoll > (efd1) notices that it may have some event ready, so it needs to wake up > the waiters on its poll wait list (efd2). So it calls ep_poll_safewake() > that ends up in another wake_up(), after having checked about the > recursion constraints. That are, no more than EP_MAX_POLLWAKE_NESTS, to > avoid stack blasting. Never hit the same queue, to avoid loops like: > > epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...); > epoll_ctl(efd3, EPOLL_CTL_ADD, efd2, ...); > epoll_ctl(efd4, EPOLL_CTL_ADD, efd3, ...); > epoll_ctl(efd1, EPOLL_CTL_ADD, efd4, ...); > > The code "if (tncur->wq == wq || ..." prevents re-entering the same > queue/lock. Since the epoll code is very careful to not nest same instance locks allow the recursion. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:27:20 +08:00
#define ___wait_cond_timeout(condition) \
({ \
bool __cond = (condition); \
if (__cond && !__ret) \
__ret = 1; \
__cond || !__ret; \
})
#define ___wait_is_interruptible(state) \
(!__builtin_constant_p(state) || \
state == TASK_INTERRUPTIBLE || state == TASK_KILLABLE) \
extern void init_wait_entry(wait_queue_t *__wait, int flags);
/*
* The below macro ___wait_event() has an explicit shadow of the __ret
* variable when used from the wait_event_*() macros.
*
* This is so that both can use the ___wait_cond_timeout() construct
* to wrap the condition.
*
* The type inconsistency of the wait_event_*() __ret variable is also
* on purpose; we use long where we can return timeout values and int
* otherwise.
*/
#define ___wait_event(wq, condition, state, exclusive, ret, cmd) \
({ \
__label__ __out; \
wait_queue_t __wait; \
long __ret = ret; /* explicit shadow */ \
\
init_wait_entry(&__wait, exclusive ? WQ_FLAG_EXCLUSIVE : 0); \
for (;;) { \
long __int = prepare_to_wait_event(&wq, &__wait, state);\
\
if (condition) \
break; \
\
if (___wait_is_interruptible(state) && __int) { \
__ret = __int; \
goto __out; \
} \
\
cmd; \
} \
finish_wait(&wq, &__wait); \
__out: __ret; \
})
#define __wait_event(wq, condition) \
(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0, \
schedule())
/**
* wait_event - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
* @condition evaluates to true. The @condition is checked each time
* the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*/
#define wait_event(wq, condition) \
do { \
might_sleep(); \
if (condition) \
break; \
__wait_event(wq, condition); \
} while (0)
#define __io_wait_event(wq, condition) \
(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0, \
io_schedule())
/*
* io_wait_event() -- like wait_event() but with io_schedule()
*/
#define io_wait_event(wq, condition) \
do { \
might_sleep(); \
if (condition) \
break; \
__io_wait_event(wq, condition); \
} while (0)
#define __wait_event_freezable(wq, condition) \
___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0, \
schedule(); try_to_freeze())
/**
* wait_event_freezable - sleep (or freeze) until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_INTERRUPTIBLE -- so as not to contribute
* to system load) until the @condition evaluates to true. The
* @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*/
#define wait_event_freezable(wq, condition) \
({ \
int __ret = 0; \
might_sleep(); \
if (!(condition)) \
__ret = __wait_event_freezable(wq, condition); \
__ret; \
})
#define __wait_event_timeout(wq, condition, timeout) \
___wait_event(wq, ___wait_cond_timeout(condition), \
TASK_UNINTERRUPTIBLE, 0, timeout, \
__ret = schedule_timeout(__ret))
/**
* wait_event_timeout - sleep until a condition gets true or a timeout elapses
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @timeout: timeout, in jiffies
*
* The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
* @condition evaluates to true. The @condition is checked each time
* the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* Returns:
* 0 if the @condition evaluated to %false after the @timeout elapsed,
* 1 if the @condition evaluated to %true after the @timeout elapsed,
* or the remaining jiffies (at least 1) if the @condition evaluated
* to %true before the @timeout elapsed.
*/
#define wait_event_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
might_sleep(); \
if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_timeout(wq, condition, timeout); \
__ret; \
})
#define __wait_event_freezable_timeout(wq, condition, timeout) \
___wait_event(wq, ___wait_cond_timeout(condition), \
TASK_INTERRUPTIBLE, 0, timeout, \
__ret = schedule_timeout(__ret); try_to_freeze())
/*
* like wait_event_timeout() -- except it uses TASK_INTERRUPTIBLE to avoid
* increasing load and is freezable.
*/
#define wait_event_freezable_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
might_sleep(); \
if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_freezable_timeout(wq, condition, timeout); \
__ret; \
})
#define __wait_event_exclusive_cmd(wq, condition, cmd1, cmd2) \
(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 1, 0, \
cmd1; schedule(); cmd2)
/*
* Just like wait_event_cmd(), except it sets exclusive flag
*/
#define wait_event_exclusive_cmd(wq, condition, cmd1, cmd2) \
do { \
if (condition) \
break; \
__wait_event_exclusive_cmd(wq, condition, cmd1, cmd2); \
} while (0)
#define __wait_event_cmd(wq, condition, cmd1, cmd2) \
(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0, \
cmd1; schedule(); cmd2)
/**
* wait_event_cmd - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @cmd1: the command will be executed before sleep
* @cmd2: the command will be executed after sleep
*
* The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
* @condition evaluates to true. The @condition is checked each time
* the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*/
#define wait_event_cmd(wq, condition, cmd1, cmd2) \
do { \
if (condition) \
break; \
__wait_event_cmd(wq, condition, cmd1, cmd2); \
} while (0)
#define __wait_event_interruptible(wq, condition) \
___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0, \
schedule())
/**
* wait_event_interruptible - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function will return -ERESTARTSYS if it was interrupted by a
* signal and 0 if @condition evaluated to true.
*/
#define wait_event_interruptible(wq, condition) \
({ \
int __ret = 0; \
might_sleep(); \
if (!(condition)) \
__ret = __wait_event_interruptible(wq, condition); \
__ret; \
})
#define __wait_event_interruptible_timeout(wq, condition, timeout) \
___wait_event(wq, ___wait_cond_timeout(condition), \
TASK_INTERRUPTIBLE, 0, timeout, \
__ret = schedule_timeout(__ret))
/**
* wait_event_interruptible_timeout - sleep until a condition gets true or a timeout elapses
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @timeout: timeout, in jiffies
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
wait: fix false timeouts when using wait_event_timeout() Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dave Jones <davej@redhat.com> Cc: Lukas Czerner <lczerner@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-25 06:55:09 +08:00
* Returns:
* 0 if the @condition evaluated to %false after the @timeout elapsed,
* 1 if the @condition evaluated to %true after the @timeout elapsed,
* the remaining jiffies (at least 1) if the @condition evaluated
* to %true before the @timeout elapsed, or -%ERESTARTSYS if it was
* interrupted by a signal.
*/
#define wait_event_interruptible_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
might_sleep(); \
if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_interruptible_timeout(wq, \
condition, timeout); \
__ret; \
})
wait: add wait_event_hrtimeout() Analagous to wait_event_timeout() and friends, this adds wait_event_hrtimeout() and wait_event_interruptible_hrtimeout(). Note that unlike the versions that use regular timers, these don't return the amount of time remaining when they return - instead, they return 0 or -ETIME if they timed out. because I was uncomfortable with the semantics of doing it the other way (that I could get it right, anyways). If the timer expires, there's no real guarantee that expire_time - current_time would be <= 0 - due to timer slack certainly, and I'm not sure I want to know the implications of the different clock bases in hrtimers. If the timer does expire and the code calculates that the time remaining is nonnegative, that could be even worse if the calling code then reuses that timeout. Probably safer to just return 0 then, but I could imagine weird bugs or at least unintended behaviour arising from that too. I came to the conclusion that if other users end up actually needing the amount of time remaining, the sanest thing to do would be to create a version that uses absolute timeouts instead of relative. [akpm@linux-foundation.org: fix description of `timeout' arg] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08 07:18:43 +08:00
#define __wait_event_hrtimeout(wq, condition, timeout, state) \
({ \
int __ret = 0; \
struct hrtimer_sleeper __t; \
\
hrtimer_init_on_stack(&__t.timer, CLOCK_MONOTONIC, \
HRTIMER_MODE_REL); \
hrtimer_init_sleeper(&__t, current); \
if ((timeout) != KTIME_MAX) \
wait: add wait_event_hrtimeout() Analagous to wait_event_timeout() and friends, this adds wait_event_hrtimeout() and wait_event_interruptible_hrtimeout(). Note that unlike the versions that use regular timers, these don't return the amount of time remaining when they return - instead, they return 0 or -ETIME if they timed out. because I was uncomfortable with the semantics of doing it the other way (that I could get it right, anyways). If the timer expires, there's no real guarantee that expire_time - current_time would be <= 0 - due to timer slack certainly, and I'm not sure I want to know the implications of the different clock bases in hrtimers. If the timer does expire and the code calculates that the time remaining is nonnegative, that could be even worse if the calling code then reuses that timeout. Probably safer to just return 0 then, but I could imagine weird bugs or at least unintended behaviour arising from that too. I came to the conclusion that if other users end up actually needing the amount of time remaining, the sanest thing to do would be to create a version that uses absolute timeouts instead of relative. [akpm@linux-foundation.org: fix description of `timeout' arg] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08 07:18:43 +08:00
hrtimer_start_range_ns(&__t.timer, timeout, \
current->timer_slack_ns, \
HRTIMER_MODE_REL); \
\
__ret = ___wait_event(wq, condition, state, 0, 0, \
wait: add wait_event_hrtimeout() Analagous to wait_event_timeout() and friends, this adds wait_event_hrtimeout() and wait_event_interruptible_hrtimeout(). Note that unlike the versions that use regular timers, these don't return the amount of time remaining when they return - instead, they return 0 or -ETIME if they timed out. because I was uncomfortable with the semantics of doing it the other way (that I could get it right, anyways). If the timer expires, there's no real guarantee that expire_time - current_time would be <= 0 - due to timer slack certainly, and I'm not sure I want to know the implications of the different clock bases in hrtimers. If the timer does expire and the code calculates that the time remaining is nonnegative, that could be even worse if the calling code then reuses that timeout. Probably safer to just return 0 then, but I could imagine weird bugs or at least unintended behaviour arising from that too. I came to the conclusion that if other users end up actually needing the amount of time remaining, the sanest thing to do would be to create a version that uses absolute timeouts instead of relative. [akpm@linux-foundation.org: fix description of `timeout' arg] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08 07:18:43 +08:00
if (!__t.task) { \
__ret = -ETIME; \
break; \
} \
schedule()); \
wait: add wait_event_hrtimeout() Analagous to wait_event_timeout() and friends, this adds wait_event_hrtimeout() and wait_event_interruptible_hrtimeout(). Note that unlike the versions that use regular timers, these don't return the amount of time remaining when they return - instead, they return 0 or -ETIME if they timed out. because I was uncomfortable with the semantics of doing it the other way (that I could get it right, anyways). If the timer expires, there's no real guarantee that expire_time - current_time would be <= 0 - due to timer slack certainly, and I'm not sure I want to know the implications of the different clock bases in hrtimers. If the timer does expire and the code calculates that the time remaining is nonnegative, that could be even worse if the calling code then reuses that timeout. Probably safer to just return 0 then, but I could imagine weird bugs or at least unintended behaviour arising from that too. I came to the conclusion that if other users end up actually needing the amount of time remaining, the sanest thing to do would be to create a version that uses absolute timeouts instead of relative. [akpm@linux-foundation.org: fix description of `timeout' arg] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08 07:18:43 +08:00
\
hrtimer_cancel(&__t.timer); \
destroy_hrtimer_on_stack(&__t.timer); \
__ret; \
})
/**
* wait_event_hrtimeout - sleep until a condition gets true or a timeout elapses
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @timeout: timeout, as a ktime_t
*
* The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function returns 0 if @condition became true, or -ETIME if the timeout
* elapsed.
*/
#define wait_event_hrtimeout(wq, condition, timeout) \
({ \
int __ret = 0; \
might_sleep(); \
wait: add wait_event_hrtimeout() Analagous to wait_event_timeout() and friends, this adds wait_event_hrtimeout() and wait_event_interruptible_hrtimeout(). Note that unlike the versions that use regular timers, these don't return the amount of time remaining when they return - instead, they return 0 or -ETIME if they timed out. because I was uncomfortable with the semantics of doing it the other way (that I could get it right, anyways). If the timer expires, there's no real guarantee that expire_time - current_time would be <= 0 - due to timer slack certainly, and I'm not sure I want to know the implications of the different clock bases in hrtimers. If the timer does expire and the code calculates that the time remaining is nonnegative, that could be even worse if the calling code then reuses that timeout. Probably safer to just return 0 then, but I could imagine weird bugs or at least unintended behaviour arising from that too. I came to the conclusion that if other users end up actually needing the amount of time remaining, the sanest thing to do would be to create a version that uses absolute timeouts instead of relative. [akpm@linux-foundation.org: fix description of `timeout' arg] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08 07:18:43 +08:00
if (!(condition)) \
__ret = __wait_event_hrtimeout(wq, condition, timeout, \
TASK_UNINTERRUPTIBLE); \
__ret; \
})
/**
* wait_event_interruptible_hrtimeout - sleep until a condition gets true or a timeout elapses
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @timeout: timeout, as a ktime_t
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function returns 0 if @condition became true, -ERESTARTSYS if it was
* interrupted by a signal, or -ETIME if the timeout elapsed.
*/
#define wait_event_interruptible_hrtimeout(wq, condition, timeout) \
({ \
long __ret = 0; \
might_sleep(); \
wait: add wait_event_hrtimeout() Analagous to wait_event_timeout() and friends, this adds wait_event_hrtimeout() and wait_event_interruptible_hrtimeout(). Note that unlike the versions that use regular timers, these don't return the amount of time remaining when they return - instead, they return 0 or -ETIME if they timed out. because I was uncomfortable with the semantics of doing it the other way (that I could get it right, anyways). If the timer expires, there's no real guarantee that expire_time - current_time would be <= 0 - due to timer slack certainly, and I'm not sure I want to know the implications of the different clock bases in hrtimers. If the timer does expire and the code calculates that the time remaining is nonnegative, that could be even worse if the calling code then reuses that timeout. Probably safer to just return 0 then, but I could imagine weird bugs or at least unintended behaviour arising from that too. I came to the conclusion that if other users end up actually needing the amount of time remaining, the sanest thing to do would be to create a version that uses absolute timeouts instead of relative. [akpm@linux-foundation.org: fix description of `timeout' arg] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08 07:18:43 +08:00
if (!(condition)) \
__ret = __wait_event_hrtimeout(wq, condition, timeout, \
TASK_INTERRUPTIBLE); \
__ret; \
})
#define __wait_event_interruptible_exclusive(wq, condition) \
___wait_event(wq, condition, TASK_INTERRUPTIBLE, 1, 0, \
schedule())
#define wait_event_interruptible_exclusive(wq, condition) \
({ \
int __ret = 0; \
might_sleep(); \
if (!(condition)) \
__ret = __wait_event_interruptible_exclusive(wq, condition);\
__ret; \
})
#define __wait_event_killable_exclusive(wq, condition) \
___wait_event(wq, condition, TASK_KILLABLE, 1, 0, \
schedule())
#define wait_event_killable_exclusive(wq, condition) \
({ \
int __ret = 0; \
might_sleep(); \
if (!(condition)) \
__ret = __wait_event_killable_exclusive(wq, condition); \
__ret; \
})
wait_event_interruptible_locked() interface New wait_event_interruptible{,_exclusive}_locked{,_irq} macros added. They work just like versions without _locked* suffix but require the wait queue's lock to be held. Also __wake_up_locked() is now exported as to pair it with the above macros. The use case of this new facility is when one uses wait queue's lock to protect a data structure. This may be advantageous if the structure needs to be protected by a spinlock anyway. In particular, with additional spinlock the following code has to be used to wait for a condition: spin_lock(&data.lock); ... for (ret = 0; !ret && !(condition); ) { spin_unlock(&data.lock); ret = wait_event_interruptible(data.wqh, (condition)); spin_lock(&data.lock); } ... spin_unlock(&data.lock); This looks bizarre plus wait_event_interruptible() locks the wait queue's lock anyway so there is a unlock+lock sequence where it could be avoided. To avoid those problems and benefit from wait queue's lock, a code similar to the following should be used: /* Waiting */ spin_lock(&data.wqh.lock); ... ret = wait_event_interruptible_locked(data.wqh, (condition)); ... spin_unlock(&data.wqh.lock); /* Waiting exclusively */ spin_lock(&data.whq.lock); ... ret = wait_event_interruptible_exclusive_locked(data.whq, (condition)); ... spin_unlock(&data.whq.lock); /* Waking up */ spin_lock(&data.wqh.lock); ... wake_up_locked(&data.wqh); ... spin_unlock(&data.wqh.lock); When spin_lock_irq() is used matching versions of macros need to be used (*_locked_irq()). Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Takashi Iwai <tiwai@suse.de> Cc: David Howells <dhowells@redhat.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 18:53:11 +08:00
#define __wait_event_freezable_exclusive(wq, condition) \
___wait_event(wq, condition, TASK_INTERRUPTIBLE, 1, 0, \
schedule(); try_to_freeze())
#define wait_event_freezable_exclusive(wq, condition) \
({ \
int __ret = 0; \
might_sleep(); \
if (!(condition)) \
__ret = __wait_event_freezable_exclusive(wq, condition);\
__ret; \
})
wait_event_interruptible_locked() interface New wait_event_interruptible{,_exclusive}_locked{,_irq} macros added. They work just like versions without _locked* suffix but require the wait queue's lock to be held. Also __wake_up_locked() is now exported as to pair it with the above macros. The use case of this new facility is when one uses wait queue's lock to protect a data structure. This may be advantageous if the structure needs to be protected by a spinlock anyway. In particular, with additional spinlock the following code has to be used to wait for a condition: spin_lock(&data.lock); ... for (ret = 0; !ret && !(condition); ) { spin_unlock(&data.lock); ret = wait_event_interruptible(data.wqh, (condition)); spin_lock(&data.lock); } ... spin_unlock(&data.lock); This looks bizarre plus wait_event_interruptible() locks the wait queue's lock anyway so there is a unlock+lock sequence where it could be avoided. To avoid those problems and benefit from wait queue's lock, a code similar to the following should be used: /* Waiting */ spin_lock(&data.wqh.lock); ... ret = wait_event_interruptible_locked(data.wqh, (condition)); ... spin_unlock(&data.wqh.lock); /* Waiting exclusively */ spin_lock(&data.whq.lock); ... ret = wait_event_interruptible_exclusive_locked(data.whq, (condition)); ... spin_unlock(&data.whq.lock); /* Waking up */ spin_lock(&data.wqh.lock); ... wake_up_locked(&data.wqh); ... spin_unlock(&data.wqh.lock); When spin_lock_irq() is used matching versions of macros need to be used (*_locked_irq()). Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Takashi Iwai <tiwai@suse.de> Cc: David Howells <dhowells@redhat.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 18:53:11 +08:00
#define __wait_event_interruptible_locked(wq, condition, exclusive, irq) \
({ \
int __ret = 0; \
DEFINE_WAIT(__wait); \
if (exclusive) \
__wait.flags |= WQ_FLAG_EXCLUSIVE; \
do { \
if (likely(list_empty(&__wait.task_list))) \
__add_wait_queue_tail(&(wq), &__wait); \
set_current_state(TASK_INTERRUPTIBLE); \
if (signal_pending(current)) { \
__ret = -ERESTARTSYS; \
break; \
} \
if (irq) \
spin_unlock_irq(&(wq).lock); \
else \
spin_unlock(&(wq).lock); \
schedule(); \
if (irq) \
spin_lock_irq(&(wq).lock); \
else \
spin_lock(&(wq).lock); \
} while (!(condition)); \
__remove_wait_queue(&(wq), &__wait); \
__set_current_state(TASK_RUNNING); \
__ret; \
})
/**
* wait_event_interruptible_locked - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* It must be called with wq.lock being held. This spinlock is
* unlocked while sleeping but @condition testing is done while lock
* is held and when this macro exits the lock is held.
*
* The lock is locked/unlocked using spin_lock()/spin_unlock()
* functions which must match the way they are locked/unlocked outside
* of this macro.
*
* wake_up_locked() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function will return -ERESTARTSYS if it was interrupted by a
* signal and 0 if @condition evaluated to true.
*/
#define wait_event_interruptible_locked(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 0, 0))
/**
* wait_event_interruptible_locked_irq - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* It must be called with wq.lock being held. This spinlock is
* unlocked while sleeping but @condition testing is done while lock
* is held and when this macro exits the lock is held.
*
* The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
* functions which must match the way they are locked/unlocked outside
* of this macro.
*
* wake_up_locked() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function will return -ERESTARTSYS if it was interrupted by a
* signal and 0 if @condition evaluated to true.
*/
#define wait_event_interruptible_locked_irq(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 0, 1))
/**
* wait_event_interruptible_exclusive_locked - sleep exclusively until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* It must be called with wq.lock being held. This spinlock is
* unlocked while sleeping but @condition testing is done while lock
* is held and when this macro exits the lock is held.
*
* The lock is locked/unlocked using spin_lock()/spin_unlock()
* functions which must match the way they are locked/unlocked outside
* of this macro.
*
* The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
* set thus when other process waits process on the list if this
* process is awaken further processes are not considered.
*
* wake_up_locked() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function will return -ERESTARTSYS if it was interrupted by a
* signal and 0 if @condition evaluated to true.
*/
#define wait_event_interruptible_exclusive_locked(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 1, 0))
/**
* wait_event_interruptible_exclusive_locked_irq - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* It must be called with wq.lock being held. This spinlock is
* unlocked while sleeping but @condition testing is done while lock
* is held and when this macro exits the lock is held.
*
* The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
* functions which must match the way they are locked/unlocked outside
* of this macro.
*
* The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
* set thus when other process waits process on the list if this
* process is awaken further processes are not considered.
*
* wake_up_locked() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function will return -ERESTARTSYS if it was interrupted by a
* signal and 0 if @condition evaluated to true.
*/
#define wait_event_interruptible_exclusive_locked_irq(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 1, 1))
#define __wait_event_killable(wq, condition) \
___wait_event(wq, condition, TASK_KILLABLE, 0, 0, schedule())
/**
* wait_event_killable - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_KILLABLE) until the
* @condition evaluates to true or a signal is received.
* The @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* The function will return -ERESTARTSYS if it was interrupted by a
* signal and 0 if @condition evaluated to true.
*/
#define wait_event_killable(wq, condition) \
({ \
int __ret = 0; \
might_sleep(); \
if (!(condition)) \
__ret = __wait_event_killable(wq, condition); \
__ret; \
})
#define __wait_event_lock_irq(wq, condition, lock, cmd) \
(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0, \
spin_unlock_irq(&lock); \
cmd; \
schedule(); \
spin_lock_irq(&lock))
/**
* wait_event_lock_irq_cmd - sleep until a condition gets true. The
* condition is checked under the lock. This
* is expected to be called with the lock
* taken.
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @lock: a locked spinlock_t, which will be released before cmd
* and schedule() and reacquired afterwards.
* @cmd: a command which is invoked outside the critical section before
* sleep
*
* The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
* @condition evaluates to true. The @condition is checked each time
* the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* This is supposed to be called while holding the lock. The lock is
* dropped before invoking the cmd and going to sleep and is reacquired
* afterwards.
*/
#define wait_event_lock_irq_cmd(wq, condition, lock, cmd) \
do { \
if (condition) \
break; \
__wait_event_lock_irq(wq, condition, lock, cmd); \
} while (0)
/**
* wait_event_lock_irq - sleep until a condition gets true. The
* condition is checked under the lock. This
* is expected to be called with the lock
* taken.
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @lock: a locked spinlock_t, which will be released before schedule()
* and reacquired afterwards.
*
* The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
* @condition evaluates to true. The @condition is checked each time
* the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* This is supposed to be called while holding the lock. The lock is
* dropped before going to sleep and is reacquired afterwards.
*/
#define wait_event_lock_irq(wq, condition, lock) \
do { \
if (condition) \
break; \
__wait_event_lock_irq(wq, condition, lock, ); \
} while (0)
#define __wait_event_interruptible_lock_irq(wq, condition, lock, cmd) \
___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0, \
spin_unlock_irq(&lock); \
cmd; \
schedule(); \
spin_lock_irq(&lock))
/**
* wait_event_interruptible_lock_irq_cmd - sleep until a condition gets true.
* The condition is checked under the lock. This is expected to
* be called with the lock taken.
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @lock: a locked spinlock_t, which will be released before cmd and
* schedule() and reacquired afterwards.
* @cmd: a command which is invoked outside the critical section before
* sleep
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received. The @condition is
* checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* This is supposed to be called while holding the lock. The lock is
* dropped before invoking the cmd and going to sleep and is reacquired
* afterwards.
*
* The macro will return -ERESTARTSYS if it was interrupted by a signal
* and 0 if @condition evaluated to true.
*/
#define wait_event_interruptible_lock_irq_cmd(wq, condition, lock, cmd) \
({ \
int __ret = 0; \
if (!(condition)) \
__ret = __wait_event_interruptible_lock_irq(wq, \
condition, lock, cmd); \
__ret; \
})
/**
* wait_event_interruptible_lock_irq - sleep until a condition gets true.
* The condition is checked under the lock. This is expected
* to be called with the lock taken.
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @lock: a locked spinlock_t, which will be released before schedule()
* and reacquired afterwards.
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or signal is received. The @condition is
* checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* This is supposed to be called while holding the lock. The lock is
* dropped before going to sleep and is reacquired afterwards.
*
* The macro will return -ERESTARTSYS if it was interrupted by a signal
* and 0 if @condition evaluated to true.
*/
#define wait_event_interruptible_lock_irq(wq, condition, lock) \
({ \
int __ret = 0; \
if (!(condition)) \
__ret = __wait_event_interruptible_lock_irq(wq, \
condition, lock,); \
__ret; \
})
#define __wait_event_interruptible_lock_irq_timeout(wq, condition, \
lock, timeout) \
___wait_event(wq, ___wait_cond_timeout(condition), \
TASK_INTERRUPTIBLE, 0, timeout, \
spin_unlock_irq(&lock); \
__ret = schedule_timeout(__ret); \
spin_lock_irq(&lock));
[SCSI] zfcp: fix lock imbalance by reworking request queue locking This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.35+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-22 23:45:36 +08:00
/**
* wait_event_interruptible_lock_irq_timeout - sleep until a condition gets
* true or a timeout elapses. The condition is checked under
* the lock. This is expected to be called with the lock taken.
[SCSI] zfcp: fix lock imbalance by reworking request queue locking This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.35+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-22 23:45:36 +08:00
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @lock: a locked spinlock_t, which will be released before schedule()
* and reacquired afterwards.
* @timeout: timeout, in jiffies
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or signal is received. The @condition is
* checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
* This is supposed to be called while holding the lock. The lock is
* dropped before going to sleep and is reacquired afterwards.
*
* The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
* was interrupted by a signal, and the remaining jiffies otherwise
* if the condition evaluated to true before the timeout elapsed.
*/
#define wait_event_interruptible_lock_irq_timeout(wq, condition, lock, \
timeout) \
({ \
long __ret = timeout; \
if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_interruptible_lock_irq_timeout( \
wq, condition, lock, timeout); \
[SCSI] zfcp: fix lock imbalance by reworking request queue locking This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.35+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-22 23:45:36 +08:00
__ret; \
})
/*
* Waitqueues which are removed from the waitqueue_head at wakeup time
*/
void prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state);
void prepare_to_wait_exclusive(wait_queue_head_t *q, wait_queue_t *wait, int state);
long prepare_to_wait_event(wait_queue_head_t *q, wait_queue_t *wait, int state);
void finish_wait(wait_queue_head_t *q, wait_queue_t *wait);
long wait_woken(wait_queue_t *wait, unsigned mode, long timeout);
int woken_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
net: Avoid extra wakeups of threads blocked in wait_for_packet() In 2.6.25 we added UDP mem accounting. This unfortunatly added a penalty when a frame is transmitted, since we have at TX completion time to call sock_wfree() to perform necessary memory accounting. This calls sock_def_write_space() and utimately scheduler if any thread is waiting on the socket. Thread(s) waiting for an incoming frame was scheduled, then had to sleep again as event was meaningless. (All threads waiting on a socket are using same sk_sleep anchor) This adds lot of extra wakeups and increases latencies, as noted by Christoph Lameter, and slows down softirq handler. Reference : http://marc.info/?l=linux-netdev&m=124060437012283&w=2 Fortunatly, Davide Libenzi recently added concept of keyed wakeups into kernel, and particularly for sockets (see commit 37e5540b3c9d838eb20f2ca8ea2eb8072271e403 epoll keyed wakeups: make sockets use keyed wakeups) Davide goal was to optimize epoll, but this new wakeup infrastructure can help non epoll users as well, if they care to setup an appropriate handler. This patch introduces new DEFINE_WAIT_FUNC() helper and uses it in wait_for_packet(), so that only relevant event can wakeup a thread blocked in this function. Trace of function calls from bnx2 TX completion bnx2_poll_work() is : __kfree_skb() skb_release_head_state() sock_wfree() sock_def_write_space() __wake_up_sync_key() __wake_up_common() receiver_wake_function() : Stops here since thread is waiting for an INPUT Reported-by: Christoph Lameter <cl@linux.com> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28 17:24:21 +08:00
#define DEFINE_WAIT_FUNC(name, function) \
wait_queue_t name = { \
.private = current, \
net: Avoid extra wakeups of threads blocked in wait_for_packet() In 2.6.25 we added UDP mem accounting. This unfortunatly added a penalty when a frame is transmitted, since we have at TX completion time to call sock_wfree() to perform necessary memory accounting. This calls sock_def_write_space() and utimately scheduler if any thread is waiting on the socket. Thread(s) waiting for an incoming frame was scheduled, then had to sleep again as event was meaningless. (All threads waiting on a socket are using same sk_sleep anchor) This adds lot of extra wakeups and increases latencies, as noted by Christoph Lameter, and slows down softirq handler. Reference : http://marc.info/?l=linux-netdev&m=124060437012283&w=2 Fortunatly, Davide Libenzi recently added concept of keyed wakeups into kernel, and particularly for sockets (see commit 37e5540b3c9d838eb20f2ca8ea2eb8072271e403 epoll keyed wakeups: make sockets use keyed wakeups) Davide goal was to optimize epoll, but this new wakeup infrastructure can help non epoll users as well, if they care to setup an appropriate handler. This patch introduces new DEFINE_WAIT_FUNC() helper and uses it in wait_for_packet(), so that only relevant event can wakeup a thread blocked in this function. Trace of function calls from bnx2 TX completion bnx2_poll_work() is : __kfree_skb() skb_release_head_state() sock_wfree() sock_def_write_space() __wake_up_sync_key() __wake_up_common() receiver_wake_function() : Stops here since thread is waiting for an INPUT Reported-by: Christoph Lameter <cl@linux.com> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28 17:24:21 +08:00
.func = function, \
.task_list = LIST_HEAD_INIT((name).task_list), \
}
net: Avoid extra wakeups of threads blocked in wait_for_packet() In 2.6.25 we added UDP mem accounting. This unfortunatly added a penalty when a frame is transmitted, since we have at TX completion time to call sock_wfree() to perform necessary memory accounting. This calls sock_def_write_space() and utimately scheduler if any thread is waiting on the socket. Thread(s) waiting for an incoming frame was scheduled, then had to sleep again as event was meaningless. (All threads waiting on a socket are using same sk_sleep anchor) This adds lot of extra wakeups and increases latencies, as noted by Christoph Lameter, and slows down softirq handler. Reference : http://marc.info/?l=linux-netdev&m=124060437012283&w=2 Fortunatly, Davide Libenzi recently added concept of keyed wakeups into kernel, and particularly for sockets (see commit 37e5540b3c9d838eb20f2ca8ea2eb8072271e403 epoll keyed wakeups: make sockets use keyed wakeups) Davide goal was to optimize epoll, but this new wakeup infrastructure can help non epoll users as well, if they care to setup an appropriate handler. This patch introduces new DEFINE_WAIT_FUNC() helper and uses it in wait_for_packet(), so that only relevant event can wakeup a thread blocked in this function. Trace of function calls from bnx2 TX completion bnx2_poll_work() is : __kfree_skb() skb_release_head_state() sock_wfree() sock_def_write_space() __wake_up_sync_key() __wake_up_common() receiver_wake_function() : Stops here since thread is waiting for an INPUT Reported-by: Christoph Lameter <cl@linux.com> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28 17:24:21 +08:00
#define DEFINE_WAIT(name) DEFINE_WAIT_FUNC(name, autoremove_wake_function)
#define DEFINE_WAIT_BIT(name, word, bit) \
struct wait_bit_queue name = { \
.key = __WAIT_BIT_KEY_INITIALIZER(word, bit), \
.wait = { \
.private = current, \
.func = wake_bit_function, \
.task_list = \
LIST_HEAD_INIT((name).wait.task_list), \
}, \
}
#define init_wait(wait) \
do { \
(wait)->private = current; \
(wait)->func = autoremove_wake_function; \
INIT_LIST_HEAD(&(wait)->task_list); \
(wait)->flags = 0; \
} while (0)
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
extern int bit_wait(struct wait_bit_key *, int);
extern int bit_wait_io(struct wait_bit_key *, int);
extern int bit_wait_timeout(struct wait_bit_key *, int);
extern int bit_wait_io_timeout(struct wait_bit_key *, int);
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
/**
* wait_on_bit - wait for a bit to be cleared
* @word: the word being waited on, a kernel virtual address
* @bit: the bit of the word being waited on
* @mode: the task state to sleep in
*
* There is a standard hashed waitqueue table for generic use. This
* is the part of the hashtable's accessor API that waits on a bit.
* For instance, if one were to have waiters on a bitflag, one would
* call wait_on_bit() in threads waiting for the bit to clear.
* One uses wait_on_bit() where one is waiting for the bit to clear,
* but has no intention of setting it.
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
* Returned value will be zero if the bit was cleared, or non-zero
* if the process received a signal and the mode permitted wakeup
* on that signal.
*/
static inline int
wait_on_bit(unsigned long *word, int bit, unsigned mode)
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
{
might_sleep();
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit(word, bit,
bit_wait,
mode);
}
/**
* wait_on_bit_io - wait for a bit to be cleared
* @word: the word being waited on, a kernel virtual address
* @bit: the bit of the word being waited on
* @mode: the task state to sleep in
*
* Use the standard hashed waitqueue table to wait for a bit
* to be cleared. This is similar to wait_on_bit(), but calls
* io_schedule() instead of schedule() for the actual waiting.
*
* Returned value will be zero if the bit was cleared, or non-zero
* if the process received a signal and the mode permitted wakeup
* on that signal.
*/
static inline int
wait_on_bit_io(unsigned long *word, int bit, unsigned mode)
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
{
might_sleep();
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit(word, bit,
bit_wait_io,
mode);
}
/**
* wait_on_bit_timeout - wait for a bit to be cleared or a timeout elapses
* @word: the word being waited on, a kernel virtual address
* @bit: the bit of the word being waited on
* @mode: the task state to sleep in
* @timeout: timeout, in jiffies
*
* Use the standard hashed waitqueue table to wait for a bit
* to be cleared. This is similar to wait_on_bit(), except also takes a
* timeout parameter.
*
* Returned value will be zero if the bit was cleared before the
* @timeout elapsed, or non-zero if the @timeout elapsed or process
* received a signal and the mode permitted wakeup on that signal.
*/
static inline int
wait_on_bit_timeout(unsigned long *word, int bit, unsigned mode,
unsigned long timeout)
{
might_sleep();
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_timeout(word, bit,
bit_wait_timeout,
mode, timeout);
}
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
/**
* wait_on_bit_action - wait for a bit to be cleared
* @word: the word being waited on, a kernel virtual address
* @bit: the bit of the word being waited on
* @action: the function used to sleep, which may take special actions
* @mode: the task state to sleep in
*
* Use the standard hashed waitqueue table to wait for a bit
* to be cleared, and allow the waiting action to be specified.
* This is like wait_on_bit() but allows fine control of how the waiting
* is done.
*
* Returned value will be zero if the bit was cleared, or non-zero
* if the process received a signal and the mode permitted wakeup
* on that signal.
*/
static inline int
wait_on_bit_action(unsigned long *word, int bit, wait_bit_action_f *action,
unsigned mode)
{
might_sleep();
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit(word, bit, action, mode);
}
/**
* wait_on_bit_lock - wait for a bit to be cleared, when wanting to set it
* @word: the word being waited on, a kernel virtual address
* @bit: the bit of the word being waited on
* @mode: the task state to sleep in
*
* There is a standard hashed waitqueue table for generic use. This
* is the part of the hashtable's accessor API that waits on a bit
* when one intends to set it, for instance, trying to lock bitflags.
* For instance, if one were to have waiters trying to set bitflag
* and waiting for it to clear before setting it, one would call
* wait_on_bit() in threads waiting to be able to set the bit.
* One uses wait_on_bit_lock() where one is waiting for the bit to
* clear with the intention of setting it, and when done, clearing it.
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
*
* Returns zero if the bit was (eventually) found to be clear and was
* set. Returns non-zero if a signal was delivered to the process and
* the @mode allows that signal to wake the process.
*/
static inline int
wait_on_bit_lock(unsigned long *word, int bit, unsigned mode)
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
{
might_sleep();
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
if (!test_and_set_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_lock(word, bit, bit_wait, mode);
}
/**
* wait_on_bit_lock_io - wait for a bit to be cleared, when wanting to set it
* @word: the word being waited on, a kernel virtual address
* @bit: the bit of the word being waited on
* @mode: the task state to sleep in
*
* Use the standard hashed waitqueue table to wait for a bit
* to be cleared and then to atomically set it. This is similar
* to wait_on_bit(), but calls io_schedule() instead of schedule()
* for the actual waiting.
*
* Returns zero if the bit was (eventually) found to be clear and was
* set. Returns non-zero if a signal was delivered to the process and
* the @mode allows that signal to wake the process.
*/
static inline int
wait_on_bit_lock_io(unsigned long *word, int bit, unsigned mode)
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
{
might_sleep();
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
if (!test_and_set_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_lock(word, bit, bit_wait_io, mode);
}
/**
* wait_on_bit_lock_action - wait for a bit to be cleared, when wanting to set it
* @word: the word being waited on, a kernel virtual address
* @bit: the bit of the word being waited on
* @action: the function used to sleep, which may take special actions
* @mode: the task state to sleep in
*
* Use the standard hashed waitqueue table to wait for a bit
* to be cleared and then to set it, and allow the waiting action
* to be specified.
* This is like wait_on_bit() but allows fine control of how the waiting
* is done.
*
* Returns zero if the bit was (eventually) found to be clear and was
* set. Returns non-zero if a signal was delivered to the process and
* the @mode allows that signal to wake the process.
*/
static inline int
wait_on_bit_lock_action(unsigned long *word, int bit, wait_bit_action_f *action,
unsigned mode)
{
might_sleep();
if (!test_and_set_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_lock(word, bit, action, mode);
}
Add wait_on_atomic_t() and wake_up_atomic_t() Add wait_on_atomic_t() and wake_up_atomic_t() to indicate became-zero events on atomic_t types. This uses the bit-wake waitqueue table. The key is set to a value outside of the number of bits in a long so that wait_on_bit() won't be woken up accidentally. What I'm using this for is: in a following patch I add a counter to struct fscache_cookie to count the number of outstanding operations that need access to netfs data. The way this works is: (1) When a cookie is allocated, the counter is initialised to 1. (2) When an operation wants to access netfs data, it calls atomic_inc_unless() to increment the counter before it does so. If it was 0, then the counter isn't incremented, the operation isn't permitted to access the netfs data (which might by this point no longer exist) and the operation aborts in some appropriate manner. (3) When an operation finishes with the netfs data, it decrements the counter and if it reaches 0, calls wake_up_atomic_t() on it - the assumption being that it was the last blocker. (4) When a cookie is released, the counter is decremented and the releaser uses wait_on_atomic_t() to wait for the counter to become 0 - which should indicate no one is using the netfs data any longer. The netfs data can then be destroyed. There are some alternatives that I have thought of and that have been suggested by Tejun Heo: (A) Using wait_on_bit() to wait on a bit in the counter. This doesn't work because if that bit happens to be 0 then the wait won't happen - even if the counter is non-zero. (B) Using wait_on_bit() to wait on a flag elsewhere which is cleared when the counter reaches 0. Such a flag would be redundant and would add complexity. (C) Adding a waitqueue to fscache_cookie - this would expand that struct by several words for an event that happens just once in each cookie's lifetime. Further, cookies are generally per-file so there are likely to be a lot of them. (D) Similar to (C), but add a pointer to a waitqueue in the cookie instead of a waitqueue. This would add single word per cookie and so would be less of an expansion - but still an expansion. (E) Adding a static waitqueue to the fscache module. Generally this would be fine, but under certain circumstances many cookies will all get added at the same time (eg. NFS umount, cache withdrawal) thereby presenting scaling issues. Note that the wait may be significant as disk I/O may be in progress. So, I think reusing the wait_on_bit() waitqueue set is reasonable. I don't make much use of the waitqueue I need on a per-cookie basis, but sometimes I have a huge flood of the cookies to deal with. I also don't want to add a whole new set of global waitqueue tables specifically for the dec-to-0 event if I can reuse the bit tables. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Milosz Tanski <milosz@adfin.com> Acked-by: Jeff Layton <jlayton@redhat.com>
2013-05-11 02:50:26 +08:00
/**
* wait_on_atomic_t - Wait for an atomic_t to become 0
* @val: The atomic value being waited on, a kernel virtual address
* @action: the function used to sleep, which may take special actions
* @mode: the task state to sleep in
*
* Wait for an atomic_t to become 0. We abuse the bit-wait waitqueue table for
* the purpose of getting a waitqueue, but we set the key to a bit number
* outside of the target 'word'.
*/
static inline
int wait_on_atomic_t(atomic_t *val, int (*action)(atomic_t *), unsigned mode)
{
might_sleep();
Add wait_on_atomic_t() and wake_up_atomic_t() Add wait_on_atomic_t() and wake_up_atomic_t() to indicate became-zero events on atomic_t types. This uses the bit-wake waitqueue table. The key is set to a value outside of the number of bits in a long so that wait_on_bit() won't be woken up accidentally. What I'm using this for is: in a following patch I add a counter to struct fscache_cookie to count the number of outstanding operations that need access to netfs data. The way this works is: (1) When a cookie is allocated, the counter is initialised to 1. (2) When an operation wants to access netfs data, it calls atomic_inc_unless() to increment the counter before it does so. If it was 0, then the counter isn't incremented, the operation isn't permitted to access the netfs data (which might by this point no longer exist) and the operation aborts in some appropriate manner. (3) When an operation finishes with the netfs data, it decrements the counter and if it reaches 0, calls wake_up_atomic_t() on it - the assumption being that it was the last blocker. (4) When a cookie is released, the counter is decremented and the releaser uses wait_on_atomic_t() to wait for the counter to become 0 - which should indicate no one is using the netfs data any longer. The netfs data can then be destroyed. There are some alternatives that I have thought of and that have been suggested by Tejun Heo: (A) Using wait_on_bit() to wait on a bit in the counter. This doesn't work because if that bit happens to be 0 then the wait won't happen - even if the counter is non-zero. (B) Using wait_on_bit() to wait on a flag elsewhere which is cleared when the counter reaches 0. Such a flag would be redundant and would add complexity. (C) Adding a waitqueue to fscache_cookie - this would expand that struct by several words for an event that happens just once in each cookie's lifetime. Further, cookies are generally per-file so there are likely to be a lot of them. (D) Similar to (C), but add a pointer to a waitqueue in the cookie instead of a waitqueue. This would add single word per cookie and so would be less of an expansion - but still an expansion. (E) Adding a static waitqueue to the fscache module. Generally this would be fine, but under certain circumstances many cookies will all get added at the same time (eg. NFS umount, cache withdrawal) thereby presenting scaling issues. Note that the wait may be significant as disk I/O may be in progress. So, I think reusing the wait_on_bit() waitqueue set is reasonable. I don't make much use of the waitqueue I need on a per-cookie basis, but sometimes I have a huge flood of the cookies to deal with. I also don't want to add a whole new set of global waitqueue tables specifically for the dec-to-0 event if I can reuse the bit tables. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Milosz Tanski <milosz@adfin.com> Acked-by: Jeff Layton <jlayton@redhat.com>
2013-05-11 02:50:26 +08:00
if (atomic_read(val) == 0)
return 0;
return out_of_line_wait_on_atomic_t(val, action, mode);
}
#endif /* _LINUX_WAIT_H */