OpenCloudOS-Kernel/drivers/base/platform.c

1195 lines
30 KiB
C
Raw Normal View History

/*
* platform.c - platform 'pseudo' bus for legacy devices
*
* Copyright (c) 2002-3 Patrick Mochel
* Copyright (c) 2002-3 Open Source Development Labs
*
* This file is released under the GPLv2
*
* Please see Documentation/driver-model/platform.txt for more
* information.
*/
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/bootmem.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/idr.h>
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 00:54:41 +08:00
#include "base.h"
#include "power/power.h"
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 00:54:41 +08:00
/* For automatically allocated device IDs */
static DEFINE_IDA(platform_devid_ida);
#define to_platform_driver(drv) (container_of((drv), struct platform_driver, \
driver))
struct device platform_bus = {
.init_name = "platform",
};
EXPORT_SYMBOL_GPL(platform_bus);
/**
* arch_setup_pdev_archdata - Allow manipulation of archdata before its used
* @pdev: platform device
*
* This is called before platform_device_add() such that any pdev_archdata may
* be setup before the platform_notifier is called. So if a user needs to
* manipulate any relevant information in the pdev_archdata they can do:
*
* platform_devic_alloc()
* ... manipulate ...
* platform_device_add()
*
* And if they don't care they can just call platform_device_register() and
* everything will just work out.
*/
void __weak arch_setup_pdev_archdata(struct platform_device *pdev)
{
}
/**
* platform_get_resource - get a resource for a device
* @dev: platform device
* @type: resource type
* @num: resource index
*/
struct resource *platform_get_resource(struct platform_device *dev,
unsigned int type, unsigned int num)
{
int i;
for (i = 0; i < dev->num_resources; i++) {
struct resource *r = &dev->resource[i];
if (type == resource_type(r) && num-- == 0)
return r;
}
return NULL;
}
EXPORT_SYMBOL_GPL(platform_get_resource);
/**
* platform_get_irq - get an IRQ for a device
* @dev: platform device
* @num: IRQ number index
*/
int platform_get_irq(struct platform_device *dev, unsigned int num)
{
struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);
return r ? r->start : -ENXIO;
}
EXPORT_SYMBOL_GPL(platform_get_irq);
/**
* platform_get_resource_byname - get a resource for a device by name
* @dev: platform device
* @type: resource type
* @name: resource name
*/
struct resource *platform_get_resource_byname(struct platform_device *dev,
unsigned int type,
const char *name)
{
int i;
for (i = 0; i < dev->num_resources; i++) {
struct resource *r = &dev->resource[i];
if (unlikely(!r->name))
continue;
if (type == resource_type(r) && !strcmp(r->name, name))
return r;
}
return NULL;
}
EXPORT_SYMBOL_GPL(platform_get_resource_byname);
/**
* platform_get_irq - get an IRQ for a device
* @dev: platform device
* @name: IRQ name
*/
int platform_get_irq_byname(struct platform_device *dev, const char *name)
{
struct resource *r = platform_get_resource_byname(dev, IORESOURCE_IRQ,
name);
return r ? r->start : -ENXIO;
}
EXPORT_SYMBOL_GPL(platform_get_irq_byname);
/**
* platform_add_devices - add a numbers of platform devices
* @devs: array of platform devices to add
* @num: number of platform devices in array
*/
int platform_add_devices(struct platform_device **devs, int num)
{
int i, ret = 0;
for (i = 0; i < num; i++) {
ret = platform_device_register(devs[i]);
if (ret) {
while (--i >= 0)
platform_device_unregister(devs[i]);
break;
}
}
return ret;
}
EXPORT_SYMBOL_GPL(platform_add_devices);
struct platform_object {
struct platform_device pdev;
char name[1];
};
/**
* platform_device_put - destroy a platform device
* @pdev: platform device to free
*
* Free all memory associated with a platform device. This function must
* _only_ be externally called in error cases. All other usage is a bug.
*/
void platform_device_put(struct platform_device *pdev)
{
if (pdev)
put_device(&pdev->dev);
}
EXPORT_SYMBOL_GPL(platform_device_put);
static void platform_device_release(struct device *dev)
{
struct platform_object *pa = container_of(dev, struct platform_object,
pdev.dev);
of_device_node_put(&pa->pdev.dev);
kfree(pa->pdev.dev.platform_data);
kfree(pa->pdev.mfd_cell);
kfree(pa->pdev.resource);
kfree(pa);
}
/**
* platform_device_alloc - create a platform device
* @name: base name of the device we're adding
* @id: instance id
*
* Create a platform device object which can have other objects attached
* to it, and which will have attached objects freed when it is released.
*/
struct platform_device *platform_device_alloc(const char *name, int id)
{
struct platform_object *pa;
pa = kzalloc(sizeof(struct platform_object) + strlen(name), GFP_KERNEL);
if (pa) {
strcpy(pa->name, name);
pa->pdev.name = pa->name;
pa->pdev.id = id;
device_initialize(&pa->pdev.dev);
pa->pdev.dev.release = platform_device_release;
arch_setup_pdev_archdata(&pa->pdev);
}
return pa ? &pa->pdev : NULL;
}
EXPORT_SYMBOL_GPL(platform_device_alloc);
/**
* platform_device_add_resources - add resources to a platform device
* @pdev: platform device allocated by platform_device_alloc to add resources to
* @res: set of resources that needs to be allocated for the device
* @num: number of resources
*
* Add a copy of the resources to the platform device. The memory
* associated with the resources will be freed when the platform device is
* released.
*/
int platform_device_add_resources(struct platform_device *pdev,
const struct resource *res, unsigned int num)
{
struct resource *r = NULL;
if (res) {
r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
if (!r)
return -ENOMEM;
}
kfree(pdev->resource);
pdev->resource = r;
pdev->num_resources = num;
return 0;
}
EXPORT_SYMBOL_GPL(platform_device_add_resources);
/**
* platform_device_add_data - add platform-specific data to a platform device
* @pdev: platform device allocated by platform_device_alloc to add resources to
* @data: platform specific data for this platform device
* @size: size of platform specific data
*
* Add a copy of platform specific data to the platform device's
* platform_data pointer. The memory associated with the platform data
* will be freed when the platform device is released.
*/
int platform_device_add_data(struct platform_device *pdev, const void *data,
size_t size)
{
void *d = NULL;
if (data) {
d = kmemdup(data, size, GFP_KERNEL);
if (!d)
return -ENOMEM;
}
kfree(pdev->dev.platform_data);
pdev->dev.platform_data = d;
return 0;
}
EXPORT_SYMBOL_GPL(platform_device_add_data);
/**
* platform_device_add - add a platform device to device hierarchy
* @pdev: platform device we're adding
*
* This is part 2 of platform_device_register(), though may be called
* separately _iff_ pdev was allocated by platform_device_alloc().
*/
int platform_device_add(struct platform_device *pdev)
{
int i, ret;
if (!pdev)
return -EINVAL;
if (!pdev->dev.parent)
pdev->dev.parent = &platform_bus;
pdev->dev.bus = &platform_bus_type;
switch (pdev->id) {
default:
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
break;
case PLATFORM_DEVID_NONE:
dev_set_name(&pdev->dev, "%s", pdev->name);
break;
case PLATFORM_DEVID_AUTO:
/*
* Automatically allocated device ID. We mark it as such so
* that we remember it must be freed, and we append a suffix
* to avoid namespace collision with explicit IDs.
*/
ret = ida_simple_get(&platform_devid_ida, 0, 0, GFP_KERNEL);
if (ret < 0)
goto err_out;
pdev->id = ret;
pdev->id_auto = true;
dev_set_name(&pdev->dev, "%s.%d.auto", pdev->name, pdev->id);
break;
}
for (i = 0; i < pdev->num_resources; i++) {
struct resource *p, *r = &pdev->resource[i];
if (r->name == NULL)
r->name = dev_name(&pdev->dev);
p = r->parent;
if (!p) {
if (resource_type(r) == IORESOURCE_MEM)
p = &iomem_resource;
else if (resource_type(r) == IORESOURCE_IO)
p = &ioport_resource;
}
if (p && insert_resource(p, r)) {
printk(KERN_ERR
"%s: failed to claim resource %d\n",
dev_name(&pdev->dev), i);
ret = -EBUSY;
goto failed;
}
}
pr_debug("Registering platform device '%s'. Parent at %s\n",
dev_name(&pdev->dev), dev_name(pdev->dev.parent));
ret = device_add(&pdev->dev);
if (ret == 0)
return ret;
failed:
if (pdev->id_auto) {
ida_simple_remove(&platform_devid_ida, pdev->id);
pdev->id = PLATFORM_DEVID_AUTO;
}
while (--i >= 0) {
struct resource *r = &pdev->resource[i];
unsigned long type = resource_type(r);
if (type == IORESOURCE_MEM || type == IORESOURCE_IO)
release_resource(r);
}
err_out:
return ret;
}
EXPORT_SYMBOL_GPL(platform_device_add);
/**
* platform_device_del - remove a platform-level device
* @pdev: platform device we're removing
*
* Note that this function will also release all memory- and port-based
* resources owned by the device (@dev->resource). This function must
* _only_ be externally called in error cases. All other usage is a bug.
*/
void platform_device_del(struct platform_device *pdev)
{
int i;
if (pdev) {
platform: reorder platform_device_del In platform_device_del(), we currently delete the device resources first, then we delete the device itself. This causes a (minor) bug to occur when one unregisters a platform device before unregistering its platform driver, and the driver is requesting (in .probe()) and releasing (in .remove()) a resource of the device. The device resources are already gone by the time the driver gets the chance to release the resources it had been requesting, causing an error like: Trying to free nonexistent resource <0000000000000295-0000000000000296> If the platform driver is unregistered first, the problem doesn't occur, as the driver will have the opportunity to release the resources it had requested before the device resources themselves are released. It's a bit odd that unregistering the driver first or the device first doesn't lead to the same result. So I believe that we should delete the device first in platform_device_del(). I've searched the git history and found that it used to be the case before 2.6.8, but was changed here: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/old-2.6-bkcvs.git;a=commitdiff;h=96ef7b3689936ee1e64b711511342026a8ce459c > 2004/07/14 16:09:44-07:00 dtor_core > [PATCH] Driver core: Fix OOPS in device_platform_unregister > > Driver core: platform_device_unregister should release resources first > and only then call device_unregister, otherwise if there > are no more references to the device it will be freed and > the fucntion will try to access freed memory. However we now have an explicit call to put_device() at the end of platform_device_unregister() so I guess the original problem no longer exists and it is safe to revert that change. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-03 02:55:54 +08:00
device_del(&pdev->dev);
if (pdev->id_auto) {
ida_simple_remove(&platform_devid_ida, pdev->id);
pdev->id = PLATFORM_DEVID_AUTO;
}
for (i = 0; i < pdev->num_resources; i++) {
struct resource *r = &pdev->resource[i];
unsigned long type = resource_type(r);
if (type == IORESOURCE_MEM || type == IORESOURCE_IO)
release_resource(r);
}
}
}
EXPORT_SYMBOL_GPL(platform_device_del);
/**
* platform_device_register - add a platform-level device
* @pdev: platform device we're adding
*/
int platform_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);
arch_setup_pdev_archdata(pdev);
return platform_device_add(pdev);
}
EXPORT_SYMBOL_GPL(platform_device_register);
/**
* platform_device_unregister - unregister a platform-level device
* @pdev: platform device we're unregistering
*
* Unregistration is done in 2 steps. First we release all resources
* and remove it from the subsystem, then we drop reference count by
* calling platform_device_put().
*/
void platform_device_unregister(struct platform_device *pdev)
{
platform_device_del(pdev);
platform_device_put(pdev);
}
EXPORT_SYMBOL_GPL(platform_device_unregister);
/**
* platform_device_register_full - add a platform-level device with
* resources and platform-specific data
fix hotplug for legacy platform drivers We've had various reports of some legacy "probe the hardware" style platform drivers having nasty problems with hotplug support. The core issue is that those legacy drivers don't fully conform to the driver model. They assume a role that should be the responsibility of infrastructure code: creating device nodes. The "modprobe" step in hotplugging relies on drivers to have split those roles into different modules. The lack of this split causes the problems. When a driver creates nodes for devices that don't exist (sending a hotplug event), then exits (aborting one modprobe) before the "modprobe $MODALIAS" step completes (by failing, since it's in the middle of a modprobe), the result can be an endless loop of modprobe invocations ... badness. This fix uses the newish per-device flag controlling issuance of "add" events. (A previous version of this patch used a per-device "driver can hotplug" flag, which only scrubbed $MODALIAS from the environment rather than suppressing the entire hotplug event.) It also shrinks that flag to one bit, saving a word in "struct device". So the net of this patch is removing some nasty failures with legacy drivers, while retaining hotplug capability for the majority of platform drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Cc: Andres Salomon <dilinger@debian.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 15:29:39 +08:00
*
* @pdevinfo: data used to create device
*
* Returns &struct platform_device pointer on success, or ERR_PTR() on error.
*/
struct platform_device *platform_device_register_full(
const struct platform_device_info *pdevinfo)
{
int ret = -ENOMEM;
struct platform_device *pdev;
pdev = platform_device_alloc(pdevinfo->name, pdevinfo->id);
if (!pdev)
goto err_alloc;
pdev->dev.parent = pdevinfo->parent;
if (pdevinfo->dma_mask) {
/*
* This memory isn't freed when the device is put,
* I don't have a nice idea for that though. Conceptually
* dma_mask in struct device should not be a pointer.
* See http://thread.gmane.org/gmane.linux.kernel.pci/9081
*/
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)
goto err;
*pdev->dev.dma_mask = pdevinfo->dma_mask;
pdev->dev.coherent_dma_mask = pdevinfo->dma_mask;
}
ret = platform_device_add_resources(pdev,
pdevinfo->res, pdevinfo->num_res);
if (ret)
goto err;
ret = platform_device_add_data(pdev,
pdevinfo->data, pdevinfo->size_data);
if (ret)
goto err;
ret = platform_device_add(pdev);
if (ret) {
err:
kfree(pdev->dev.dma_mask);
err_alloc:
platform_device_put(pdev);
return ERR_PTR(ret);
}
return pdev;
}
EXPORT_SYMBOL_GPL(platform_device_register_full);
static int platform_drv_probe(struct device *_dev)
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
return drv->probe(dev);
}
static int platform_drv_probe_fail(struct device *_dev)
{
return -ENXIO;
}
static int platform_drv_remove(struct device *_dev)
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
return drv->remove(dev);
}
static void platform_drv_shutdown(struct device *_dev)
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
drv->shutdown(dev);
}
/**
* platform_driver_register - register a driver for platform-level devices
* @drv: platform driver structure
*/
int platform_driver_register(struct platform_driver *drv)
{
drv->driver.bus = &platform_bus_type;
if (drv->probe)
drv->driver.probe = platform_drv_probe;
if (drv->remove)
drv->driver.remove = platform_drv_remove;
if (drv->shutdown)
drv->driver.shutdown = platform_drv_shutdown;
return driver_register(&drv->driver);
}
EXPORT_SYMBOL_GPL(platform_driver_register);
/**
* platform_driver_unregister - unregister a driver for platform-level devices
* @drv: platform driver structure
*/
void platform_driver_unregister(struct platform_driver *drv)
{
driver_unregister(&drv->driver);
}
EXPORT_SYMBOL_GPL(platform_driver_unregister);
/**
* platform_driver_probe - register driver for non-hotpluggable device
* @drv: platform driver structure
* @probe: the driver probe routine, probably from an __init section
*
* Use this instead of platform_driver_register() when you know the device
* is not hotpluggable and has already been registered, and you want to
* remove its run-once probe() infrastructure from memory after the driver
* has bound to the device.
*
* One typical use for this would be with drivers for controllers integrated
* into system-on-chip processors, where the controller devices have been
* configured as part of board setup.
*
* Returns zero if the driver registered and bound to a device, else returns
* a negative error code and with the driver not registered.
*/
int __init_or_module platform_driver_probe(struct platform_driver *drv,
int (*probe)(struct platform_device *))
{
int retval, code;
/* make sure driver won't have bind/unbind attributes */
drv->driver.suppress_bind_attrs = true;
/* temporary section violation during probe() */
drv->probe = probe;
retval = code = platform_driver_register(drv);
/*
* Fixup that section violation, being paranoid about code scanning
* the list of drivers in order to probe new devices. Check to see
* if the probe was successful, and make sure any forced probes of
* new devices fail.
*/
spin_lock(&drv->driver.bus->p->klist_drivers.k_lock);
drv->probe = NULL;
if (code == 0 && list_empty(&drv->driver.p->klist_devices.k_list))
retval = -ENODEV;
drv->driver.probe = platform_drv_probe_fail;
spin_unlock(&drv->driver.bus->p->klist_drivers.k_lock);
if (code != retval)
platform_driver_unregister(drv);
return retval;
}
EXPORT_SYMBOL_GPL(platform_driver_probe);
/**
* platform_create_bundle - register driver and create corresponding device
* @driver: platform driver structure
* @probe: the driver probe routine, probably from an __init section
* @res: set of resources that needs to be allocated for the device
* @n_res: number of resources
* @data: platform specific data for this platform device
* @size: size of platform specific data
*
* Use this in legacy-style modules that probe hardware directly and
* register a single platform device and corresponding platform driver.
*
* Returns &struct platform_device pointer on success, or ERR_PTR() on error.
*/
struct platform_device * __init_or_module platform_create_bundle(
struct platform_driver *driver,
int (*probe)(struct platform_device *),
struct resource *res, unsigned int n_res,
const void *data, size_t size)
{
struct platform_device *pdev;
int error;
pdev = platform_device_alloc(driver->driver.name, -1);
if (!pdev) {
error = -ENOMEM;
goto err_out;
}
error = platform_device_add_resources(pdev, res, n_res);
if (error)
goto err_pdev_put;
error = platform_device_add_data(pdev, data, size);
if (error)
goto err_pdev_put;
error = platform_device_add(pdev);
if (error)
goto err_pdev_put;
error = platform_driver_probe(driver, probe);
if (error)
goto err_pdev_del;
return pdev;
err_pdev_del:
platform_device_del(pdev);
err_pdev_put:
platform_device_put(pdev);
err_out:
return ERR_PTR(error);
}
EXPORT_SYMBOL_GPL(platform_create_bundle);
/* modalias support enables more hands-off userspace setup:
* (a) environment variable lets new-style hotplug events work once system is
* fully running: "modprobe $MODALIAS"
* (b) sysfs attribute lets new-style coldplug recover from hotplug events
* mishandled before system is fully running: "modprobe $(cat modalias)"
*/
static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
char *buf)
{
struct platform_device *pdev = to_platform_device(dev);
int len = snprintf(buf, PAGE_SIZE, "platform:%s\n", pdev->name);
return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len;
}
static struct device_attribute platform_dev_attrs[] = {
__ATTR_RO(modalias),
__ATTR_NULL,
};
static int platform_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct platform_device *pdev = to_platform_device(dev);
int rc;
/* Some devices have extra OF data and an OF-style MODALIAS */
rc = of_device_uevent_modalias(dev,env);
if (rc != -ENODEV)
return rc;
add_uevent_var(env, "MODALIAS=%s%s", PLATFORM_MODULE_PREFIX,
pdev->name);
return 0;
}
static const struct platform_device_id *platform_match_id(
const struct platform_device_id *id,
struct platform_device *pdev)
{
while (id->name[0]) {
if (strcmp(pdev->name, id->name) == 0) {
pdev->id_entry = id;
return id;
}
id++;
}
return NULL;
}
/**
* platform_match - bind platform device to platform driver.
* @dev: device.
* @drv: driver.
*
* Platform device IDs are assumed to be encoded like this:
* "<name><instance>", where <name> is a short description of the type of
* device, like "pci" or "floppy", and <instance> is the enumerated
* instance of the device, like '0' or '42'. Driver IDs are simply
* "<name>". So, extract the <name> from the platform_device structure,
* and compare it against the name of the driver. Return whether they match
* or not.
*/
static int platform_match(struct device *dev, struct device_driver *drv)
{
struct platform_device *pdev = to_platform_device(dev);
struct platform_driver *pdrv = to_platform_driver(drv);
/* Attempt an OF style match first */
if (of_driver_match_device(dev, drv))
return 1;
/* Then try to match against the id table */
if (pdrv->id_table)
return platform_match_id(pdrv->id_table, pdev) != NULL;
/* fall-back to driver name match */
return (strcmp(pdev->name, drv->name) == 0);
}
#ifdef CONFIG_PM_SLEEP
static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
{
struct platform_driver *pdrv = to_platform_driver(dev->driver);
struct platform_device *pdev = to_platform_device(dev);
int ret = 0;
if (dev->driver && pdrv->suspend)
ret = pdrv->suspend(pdev, mesg);
return ret;
}
static int platform_legacy_resume(struct device *dev)
{
struct platform_driver *pdrv = to_platform_driver(dev->driver);
struct platform_device *pdev = to_platform_device(dev);
int ret = 0;
if (dev->driver && pdrv->resume)
ret = pdrv->resume(pdev);
return ret;
}
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_SUSPEND
int platform_pm_suspend(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->suspend)
ret = drv->pm->suspend(dev);
} else {
ret = platform_legacy_suspend(dev, PMSG_SUSPEND);
}
return ret;
}
int platform_pm_resume(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->resume)
ret = drv->pm->resume(dev);
} else {
ret = platform_legacy_resume(dev);
}
return ret;
}
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATE_CALLBACKS
int platform_pm_freeze(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->freeze)
ret = drv->pm->freeze(dev);
} else {
ret = platform_legacy_suspend(dev, PMSG_FREEZE);
}
return ret;
}
int platform_pm_thaw(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->thaw)
ret = drv->pm->thaw(dev);
} else {
ret = platform_legacy_resume(dev);
}
return ret;
}
int platform_pm_poweroff(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->poweroff)
ret = drv->pm->poweroff(dev);
} else {
ret = platform_legacy_suspend(dev, PMSG_HIBERNATE);
}
return ret;
}
int platform_pm_restore(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->restore)
ret = drv->pm->restore(dev);
} else {
ret = platform_legacy_resume(dev);
}
return ret;
}
#endif /* CONFIG_HIBERNATE_CALLBACKS */
static const struct dev_pm_ops platform_dev_pm_ops = {
.runtime_suspend = pm_generic_runtime_suspend,
.runtime_resume = pm_generic_runtime_resume,
.runtime_idle = pm_generic_runtime_idle,
USE_PLATFORM_PM_SLEEP_OPS
};
struct bus_type platform_bus_type = {
.name = "platform",
.dev_attrs = platform_dev_attrs,
.match = platform_match,
.uevent = platform_uevent,
.pm = &platform_dev_pm_ops,
};
EXPORT_SYMBOL_GPL(platform_bus_type);
int __init platform_bus_init(void)
{
int error;
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
early_platform_cleanup();
error = device_register(&platform_bus);
if (error)
return error;
error = bus_register(&platform_bus_type);
if (error)
device_unregister(&platform_bus);
return error;
}
#ifndef ARCH_HAS_DMA_GET_REQUIRED_MASK
u64 dma_get_required_mask(struct device *dev)
{
u32 low_totalram = ((max_pfn - 1) << PAGE_SHIFT);
u32 high_totalram = ((max_pfn - 1) >> (32 - PAGE_SHIFT));
u64 mask;
if (!high_totalram) {
/* convert to mask just covering totalram */
low_totalram = (1 << (fls(low_totalram) - 1));
low_totalram += low_totalram - 1;
mask = low_totalram;
} else {
high_totalram = (1 << (fls(high_totalram) - 1));
high_totalram += high_totalram - 1;
mask = (((u64)high_totalram) << 32) + 0xffffffff;
}
return mask;
}
EXPORT_SYMBOL_GPL(dma_get_required_mask);
#endif
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
static __initdata LIST_HEAD(early_platform_driver_list);
static __initdata LIST_HEAD(early_platform_device_list);
/**
* early_platform_driver_register - register early platform driver
* @epdrv: early_platform driver structure
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @buf: string passed from early_param()
*
* Helper function for early_platform_init() / early_platform_init_buffer()
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
int __init early_platform_driver_register(struct early_platform_driver *epdrv,
char *buf)
{
char *tmp;
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
int n;
/* Simply add the driver to the end of the global list.
* Drivers will by default be put on the list in compiled-in order.
*/
if (!epdrv->list.next) {
INIT_LIST_HEAD(&epdrv->list);
list_add_tail(&epdrv->list, &early_platform_driver_list);
}
/* If the user has specified device then make sure the driver
* gets prioritized. The driver of the last device specified on
* command line will be put first on the list.
*/
n = strlen(epdrv->pdrv->driver.name);
if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
list_move(&epdrv->list, &early_platform_driver_list);
/* Allow passing parameters after device name */
if (buf[n] == '\0' || buf[n] == ',')
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
epdrv->requested_id = -1;
else {
epdrv->requested_id = simple_strtoul(&buf[n + 1],
&tmp, 10);
if (buf[n] != '.' || (tmp == &buf[n + 1])) {
epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
n = 0;
} else
n += strcspn(&buf[n + 1], ",") + 1;
}
if (buf[n] == ',')
n++;
if (epdrv->bufsize) {
memcpy(epdrv->buffer, &buf[n],
min_t(int, epdrv->bufsize, strlen(&buf[n]) + 1));
epdrv->buffer[epdrv->bufsize - 1] = '\0';
}
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
}
return 0;
}
/**
* early_platform_add_devices - adds a number of early platform devices
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @devs: array of early platform devices to add
* @num: number of early platform devices in array
*
* Used by early architecture code to register early platform devices and
* their platform data.
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
void __init early_platform_add_devices(struct platform_device **devs, int num)
{
struct device *dev;
int i;
/* simply add the devices to list */
for (i = 0; i < num; i++) {
dev = &devs[i]->dev;
if (!dev->devres_head.next) {
pm_runtime_early_init(dev);
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
INIT_LIST_HEAD(&dev->devres_head);
list_add_tail(&dev->devres_head,
&early_platform_device_list);
}
}
}
/**
* early_platform_driver_register_all - register early platform drivers
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @class_str: string to identify early platform driver class
*
* Used by architecture code to register all early platform drivers
* for a certain class. If omitted then only early platform drivers
* with matching kernel command line class parameters will be registered.
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
void __init early_platform_driver_register_all(char *class_str)
{
/* The "class_str" parameter may or may not be present on the kernel
* command line. If it is present then there may be more than one
* matching parameter.
*
* Since we register our early platform drivers using early_param()
* we need to make sure that they also get registered in the case
* when the parameter is missing from the kernel command line.
*
* We use parse_early_options() to make sure the early_param() gets
* called at least once. The early_param() may be called more than
* once since the name of the preferred device may be specified on
* the kernel command line. early_platform_driver_register() handles
* this case for us.
*/
parse_early_options(class_str);
}
/**
* early_platform_match - find early platform device matching driver
* @epdrv: early platform driver structure
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @id: id to match against
*/
static __init struct platform_device *
early_platform_match(struct early_platform_driver *epdrv, int id)
{
struct platform_device *pd;
list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
if (platform_match(&pd->dev, &epdrv->pdrv->driver))
if (pd->id == id)
return pd;
return NULL;
}
/**
* early_platform_left - check if early platform driver has matching devices
* @epdrv: early platform driver structure
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @id: return true if id or above exists
*/
static __init int early_platform_left(struct early_platform_driver *epdrv,
int id)
{
struct platform_device *pd;
list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
if (platform_match(&pd->dev, &epdrv->pdrv->driver))
if (pd->id >= id)
return 1;
return 0;
}
/**
* early_platform_driver_probe_id - probe drivers matching class_str and id
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @class_str: string to identify early platform driver class
* @id: id to match against
* @nr_probe: number of platform devices to successfully probe before exiting
*/
static int __init early_platform_driver_probe_id(char *class_str,
int id,
int nr_probe)
{
struct early_platform_driver *epdrv;
struct platform_device *match;
int match_id;
int n = 0;
int left = 0;
list_for_each_entry(epdrv, &early_platform_driver_list, list) {
/* only use drivers matching our class_str */
if (strcmp(class_str, epdrv->class_str))
continue;
if (id == -2) {
match_id = epdrv->requested_id;
left = 1;
} else {
match_id = id;
left += early_platform_left(epdrv, id);
/* skip requested id */
switch (epdrv->requested_id) {
case EARLY_PLATFORM_ID_ERROR:
case EARLY_PLATFORM_ID_UNSET:
break;
default:
if (epdrv->requested_id == id)
match_id = EARLY_PLATFORM_ID_UNSET;
}
}
switch (match_id) {
case EARLY_PLATFORM_ID_ERROR:
pr_warning("%s: unable to parse %s parameter\n",
class_str, epdrv->pdrv->driver.name);
/* fall-through */
case EARLY_PLATFORM_ID_UNSET:
match = NULL;
break;
default:
match = early_platform_match(epdrv, match_id);
}
if (match) {
/*
* Set up a sensible init_name to enable
* dev_name() and others to be used before the
* rest of the driver core is initialized.
*/
if (!match->dev.init_name && slab_is_available()) {
if (match->id != -1)
match->dev.init_name =
kasprintf(GFP_KERNEL, "%s.%d",
match->name,
match->id);
else
match->dev.init_name =
kasprintf(GFP_KERNEL, "%s",
match->name);
if (!match->dev.init_name)
return -ENOMEM;
}
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
if (epdrv->pdrv->probe(match))
pr_warning("%s: unable to probe %s early.\n",
class_str, match->name);
else
n++;
}
if (n >= nr_probe)
break;
}
if (left)
return n;
else
return -ENODEV;
}
/**
* early_platform_driver_probe - probe a class of registered drivers
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @class_str: string to identify early platform driver class
* @nr_probe: number of platform devices to successfully probe before exiting
* @user_only: only probe user specified early platform devices
*
* Used by architecture code to probe registered early platform drivers
* within a certain class. For probe to happen a registered early platform
* device matching a registered early platform driver is needed.
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
int __init early_platform_driver_probe(char *class_str,
int nr_probe,
int user_only)
{
int k, n, i;
n = 0;
for (i = -2; n < nr_probe; i++) {
k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
if (k < 0)
break;
n += k;
if (user_only)
break;
}
return n;
}
/**
* early_platform_cleanup - clean up early platform code
*/
void __init early_platform_cleanup(void)
{
struct platform_device *pd, *pd2;
/* clean up the devres list used to chain devices */
list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
dev.devres_head) {
list_del(&pd->dev.devres_head);
memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
}
}