2005-04-17 06:20:36 +08:00
|
|
|
#
|
|
|
|
|
# Wireless LAN device configuration
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
menu "Wireless LAN (non-hamradio)"
|
|
|
|
|
depends on NETDEVICES
|
|
|
|
|
|
|
|
|
|
config NET_RADIO
|
2006-01-21 07:46:55 +08:00
|
|
|
bool "Wireless LAN drivers (non-hamradio)"
|
|
|
|
|
select WIRELESS_EXT
|
2005-04-17 06:20:36 +08:00
|
|
|
---help---
|
|
|
|
|
Support for wireless LANs and everything having to do with radio,
|
|
|
|
|
but not with amateur radio or FM broadcasting.
|
|
|
|
|
|
|
|
|
|
Saying Y here also enables the Wireless Extensions (creates
|
|
|
|
|
/proc/net/wireless and enables iwconfig access). The Wireless
|
|
|
|
|
Extension is a generic API allowing a driver to expose to the user
|
|
|
|
|
space configuration and statistics specific to common Wireless LANs.
|
|
|
|
|
The beauty of it is that a single set of tool can support all the
|
|
|
|
|
variations of Wireless LANs, regardless of their type (as long as
|
|
|
|
|
the driver supports Wireless Extension). Another advantage is that
|
|
|
|
|
these parameters may be changed on the fly without restarting the
|
|
|
|
|
driver (or Linux). If you wish to use Wireless Extensions with
|
|
|
|
|
wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
|
|
|
|
|
the tools from
|
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
|
|
2006-02-23 07:10:56 +08:00
|
|
|
config NET_WIRELESS_RTNETLINK
|
|
|
|
|
bool "Wireless Extension API over RtNetlink"
|
2006-03-25 07:47:25 +08:00
|
|
|
depends on NET_RADIO
|
2006-02-23 07:10:56 +08:00
|
|
|
---help---
|
|
|
|
|
Support the Wireless Extension API over the RtNetlink socket
|
|
|
|
|
in addition to the traditional ioctl interface (selected above).
|
|
|
|
|
|
|
|
|
|
For now, few tools use this facility, but it might grow in the
|
|
|
|
|
future. The only downside is that it adds 4.5 kB to your kernel.
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
# Note : the cards are obsolete (can't buy them anymore), but the drivers
|
|
|
|
|
# are not, as people are still using them...
|
|
|
|
|
comment "Obsolete Wireless cards support (pre-802.11)"
|
|
|
|
|
depends on NET_RADIO && (INET || ISA || PCMCIA)
|
|
|
|
|
|
|
|
|
|
config STRIP
|
|
|
|
|
tristate "STRIP (Metricom starmode radio IP)"
|
|
|
|
|
depends on NET_RADIO && INET
|
|
|
|
|
---help---
|
|
|
|
|
Say Y if you have a Metricom radio and intend to use Starmode Radio
|
|
|
|
|
IP. STRIP is a radio protocol developed for the MosquitoNet project
|
|
|
|
|
(on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
|
|
|
|
|
traffic using Metricom radios. Metricom radios are small, battery
|
|
|
|
|
powered, 100kbit/sec packet radio transceivers, about the size and
|
|
|
|
|
weight of a cellular telephone. (You may also have heard them called
|
|
|
|
|
"Metricom modems" but we avoid the term "modem" because it misleads
|
|
|
|
|
many people into thinking that you can plug a Metricom modem into a
|
|
|
|
|
phone line and use it as a modem.)
|
|
|
|
|
|
|
|
|
|
You can use STRIP on any Linux machine with a serial port, although
|
|
|
|
|
it is obviously most useful for people with laptop computers. If you
|
|
|
|
|
think you might get a Metricom radio in the future, there is no harm
|
|
|
|
|
in saying Y to STRIP now, except that it makes the kernel a bit
|
|
|
|
|
bigger.
|
|
|
|
|
|
|
|
|
|
To compile this as a module, choose M here: the module will be
|
|
|
|
|
called strip.
|
|
|
|
|
|
|
|
|
|
config ARLAN
|
|
|
|
|
tristate "Aironet Arlan 655 & IC2200 DS support"
|
|
|
|
|
depends on NET_RADIO && ISA && !64BIT
|
|
|
|
|
---help---
|
|
|
|
|
Aironet makes Arlan, a class of wireless LAN adapters. These use the
|
|
|
|
|
www.Telxon.com chip, which is also used on several similar cards.
|
|
|
|
|
This driver is tested on the 655 and IC2200 series cards. Look at
|
|
|
|
|
<http://www.ylenurme.ee/~elmer/655/> for the latest information.
|
|
|
|
|
|
|
|
|
|
The driver is built as two modules, arlan and arlan-proc. The latter
|
|
|
|
|
is the /proc interface and is not needed most of time.
|
|
|
|
|
|
|
|
|
|
On some computers the card ends up in non-valid state after some
|
|
|
|
|
time. Use a ping-reset script to clear it.
|
|
|
|
|
|
|
|
|
|
config WAVELAN
|
|
|
|
|
tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
|
|
|
|
|
depends on NET_RADIO && ISA
|
|
|
|
|
---help---
|
|
|
|
|
The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
|
|
|
|
|
a Radio LAN (wireless Ethernet-like Local Area Network) using the
|
|
|
|
|
radio frequencies 900 MHz and 2.4 GHz.
|
|
|
|
|
|
|
|
|
|
This driver support the ISA version of the WaveLAN card. A separate
|
|
|
|
|
driver for the PCMCIA (PC-card) hardware is available in David
|
|
|
|
|
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
|
|
|
|
|
for location).
|
|
|
|
|
|
|
|
|
|
If you want to use an ISA WaveLAN card under Linux, say Y and read
|
|
|
|
|
the Ethernet-HOWTO, available from
|
|
|
|
|
<http://www.tldp.org/docs.html#howto>. Some more specific
|
|
|
|
|
information is contained in
|
|
|
|
|
<file:Documentation/networking/wavelan.txt> and in the source code
|
|
|
|
|
<file:drivers/net/wavelan.p.h>.
|
|
|
|
|
|
|
|
|
|
You will also need the wireless tools package available from
|
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
|
Please read the man pages contained therein.
|
|
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
|
|
|
called wavelan.
|
|
|
|
|
|
|
|
|
|
config PCMCIA_WAVELAN
|
|
|
|
|
tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
|
|
|
|
|
depends on NET_RADIO && PCMCIA
|
|
|
|
|
help
|
|
|
|
|
Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
|
|
|
|
|
(PC-card) wireless Ethernet networking card to your computer. This
|
|
|
|
|
driver is for the non-IEEE-802.11 Wavelan cards.
|
|
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
|
|
|
called wavelan_cs. If unsure, say N.
|
|
|
|
|
|
|
|
|
|
config PCMCIA_NETWAVE
|
|
|
|
|
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
|
|
|
|
|
depends on NET_RADIO && PCMCIA
|
|
|
|
|
help
|
|
|
|
|
Say Y here if you intend to attach this type of PCMCIA (PC-card)
|
|
|
|
|
wireless Ethernet networking card to your computer.
|
|
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
|
|
|
called netwave_cs. If unsure, say N.
|
|
|
|
|
|
|
|
|
|
comment "Wireless 802.11 Frequency Hopping cards support"
|
|
|
|
|
depends on NET_RADIO && PCMCIA
|
|
|
|
|
|
|
|
|
|
config PCMCIA_RAYCS
|
|
|
|
|
tristate "Aviator/Raytheon 2.4MHz wireless support"
|
|
|
|
|
depends on NET_RADIO && PCMCIA
|
|
|
|
|
---help---
|
|
|
|
|
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
|
|
|
|
|
(PC-card) wireless Ethernet networking card to your computer.
|
|
|
|
|
Please read the file <file:Documentation/networking/ray_cs.txt> for
|
|
|
|
|
details.
|
|
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
|
|
|
called ray_cs. If unsure, say N.
|
|
|
|
|
|
|
|
|
|
comment "Wireless 802.11b ISA/PCI cards support"
|
|
|
|
|
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
|
|
|
|
|
|
2005-03-24 07:32:29 +08:00
|
|
|
config IPW2100
|
|
|
|
|
tristate "Intel PRO/Wireless 2100 Network Connection"
|
2006-02-05 23:13:22 +08:00
|
|
|
depends on NET_RADIO && PCI
|
2005-03-24 07:32:29 +08:00
|
|
|
select FW_LOADER
|
2006-02-05 23:13:22 +08:00
|
|
|
select IEEE80211
|
2005-03-24 07:32:29 +08:00
|
|
|
---help---
|
|
|
|
|
A driver for the Intel PRO/Wireless 2100 Network
|
|
|
|
|
Connection 802.11b wireless network adapter.
|
|
|
|
|
|
|
|
|
|
See <file:Documentation/networking/README.ipw2100> for information on
|
|
|
|
|
the capabilities currently enabled in this driver and for tips
|
|
|
|
|
for debugging issues and problems.
|
|
|
|
|
|
|
|
|
|
In order to use this driver, you will need a firmware image for it.
|
|
|
|
|
You can obtain the firmware from
|
|
|
|
|
<http://ipw2100.sf.net/>. Once you have the firmware image, you
|
2006-02-10 17:51:03 +08:00
|
|
|
will need to place it in /lib/firmware.
|
2005-03-24 07:32:29 +08:00
|
|
|
|
|
|
|
|
You will also very likely need the Wireless Tools in order to
|
|
|
|
|
configure your card:
|
|
|
|
|
|
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
|
|
|
|
|
|
If you want to compile the driver as a module ( = code which can be
|
2006-01-15 08:57:00 +08:00
|
|
|
inserted in and removed from the running kernel whenever you want),
|
2005-03-24 07:32:29 +08:00
|
|
|
say M here and read <file:Documentation/modules.txt>. The module
|
|
|
|
|
will be called ipw2100.ko.
|
|
|
|
|
|
2005-08-26 08:05:45 +08:00
|
|
|
config IPW2100_MONITOR
|
2005-03-24 07:32:29 +08:00
|
|
|
bool "Enable promiscuous mode"
|
|
|
|
|
depends on IPW2100
|
|
|
|
|
---help---
|
|
|
|
|
Enables promiscuous/monitor mode support for the ipw2100 driver.
|
|
|
|
|
With this feature compiled into the driver, you can switch to
|
|
|
|
|
promiscuous mode via the Wireless Tool's Monitor mode. While in this
|
|
|
|
|
mode, no packets can be sent.
|
|
|
|
|
|
2005-12-01 17:41:46 +08:00
|
|
|
config IPW2100_DEBUG
|
2005-03-24 07:32:29 +08:00
|
|
|
bool "Enable full debugging output in IPW2100 module."
|
|
|
|
|
depends on IPW2100
|
|
|
|
|
---help---
|
|
|
|
|
This option will enable debug tracing output for the IPW2100.
|
|
|
|
|
|
|
|
|
|
This will result in the kernel module being ~60k larger. You can
|
|
|
|
|
control which debug output is sent to the kernel log by setting the
|
|
|
|
|
value in
|
|
|
|
|
|
|
|
|
|
/sys/bus/pci/drivers/ipw2100/debug_level
|
|
|
|
|
|
|
|
|
|
This entry will only exist if this option is enabled.
|
|
|
|
|
|
|
|
|
|
If you are not trying to debug or develop the IPW2100 driver, you
|
|
|
|
|
most likely want to say N here.
|
|
|
|
|
|
2005-03-26 02:31:53 +08:00
|
|
|
config IPW2200
|
|
|
|
|
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
|
2006-02-05 23:13:22 +08:00
|
|
|
depends on NET_RADIO && PCI
|
2005-03-26 02:31:53 +08:00
|
|
|
select FW_LOADER
|
2006-02-05 23:13:22 +08:00
|
|
|
select IEEE80211
|
2005-03-26 02:31:53 +08:00
|
|
|
---help---
|
|
|
|
|
A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
|
|
|
|
|
Connection adapters.
|
|
|
|
|
|
|
|
|
|
See <file:Documentation/networking/README.ipw2200> for
|
|
|
|
|
information on the capabilities currently enabled in this
|
|
|
|
|
driver and for tips for debugging issues and problems.
|
|
|
|
|
|
|
|
|
|
In order to use this driver, you will need a firmware image for it.
|
|
|
|
|
You can obtain the firmware from
|
|
|
|
|
<http://ipw2200.sf.net/>. See the above referenced README.ipw2200
|
2006-02-13 01:53:04 +08:00
|
|
|
for information on where to install the firmware images.
|
2005-03-26 02:31:53 +08:00
|
|
|
|
|
|
|
|
You will also very likely need the Wireless Tools in order to
|
|
|
|
|
configure your card:
|
|
|
|
|
|
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
|
|
|
|
|
|
If you want to compile the driver as a module ( = code which can be
|
2006-01-15 08:57:00 +08:00
|
|
|
inserted in and removed from the running kernel whenever you want),
|
2005-03-26 02:31:53 +08:00
|
|
|
say M here and read <file:Documentation/modules.txt>. The module
|
|
|
|
|
will be called ipw2200.ko.
|
|
|
|
|
|
2006-01-06 02:40:07 +08:00
|
|
|
config IPW2200_MONITOR
|
|
|
|
|
bool "Enable promiscuous mode"
|
|
|
|
|
depends on IPW2200
|
|
|
|
|
---help---
|
|
|
|
|
Enables promiscuous/monitor mode support for the ipw2200 driver.
|
|
|
|
|
With this feature compiled into the driver, you can switch to
|
|
|
|
|
promiscuous mode via the Wireless Tool's Monitor mode. While in this
|
|
|
|
|
mode, no packets can be sent.
|
|
|
|
|
|
|
|
|
|
config IPW_QOS
|
|
|
|
|
bool "Enable QoS support"
|
|
|
|
|
depends on IPW2200 && EXPERIMENTAL
|
|
|
|
|
|
2005-12-01 17:41:46 +08:00
|
|
|
config IPW2200_DEBUG
|
2005-03-26 02:31:53 +08:00
|
|
|
bool "Enable full debugging output in IPW2200 module."
|
|
|
|
|
depends on IPW2200
|
|
|
|
|
---help---
|
|
|
|
|
This option will enable debug tracing output for the IPW2200.
|
|
|
|
|
|
|
|
|
|
This will result in the kernel module being ~100k larger. You can
|
|
|
|
|
control which debug output is sent to the kernel log by setting the
|
|
|
|
|
value in
|
|
|
|
|
|
|
|
|
|
/sys/bus/pci/drivers/ipw2200/debug_level
|
|
|
|
|
|
|
|
|
|
This entry will only exist if this option is enabled.
|
|
|
|
|
|
|
|
|
|
To set a value, simply echo an 8-byte hex value to the same file:
|
|
|
|
|
|
|
|
|
|
% echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level
|
|
|
|
|
|
|
|
|
|
You can find the list of debug mask values in
|
|
|
|
|
drivers/net/wireless/ipw2200.h
|
|
|
|
|
|
|
|
|
|
If you are not trying to debug or develop the IPW2200 driver, you
|
|
|
|
|
most likely want to say N here.
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
config AIRO
|
|
|
|
|
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
|
2006-01-21 08:35:15 +08:00
|
|
|
depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN)
|
|
|
|
|
select CRYPTO
|
2005-04-17 06:20:36 +08:00
|
|
|
---help---
|
|
|
|
|
This is the standard Linux driver to support Cisco/Aironet ISA and
|
|
|
|
|
PCI 802.11 wireless cards.
|
|
|
|
|
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
|
|
|
|
|
- with or without encryption) as well as card before the Cisco
|
2006-02-13 01:53:04 +08:00
|
|
|
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
|
This driver support both the standard Linux Wireless Extensions
|
|
|
|
|
and Cisco proprietary API, so both the Linux Wireless Tools and the
|
|
|
|
|
Cisco Linux utilities can be used to configure the card.
|
|
|
|
|
|
|
|
|
|
The driver can be compiled as a module and will be named "airo".
|
|
|
|
|
|
|
|
|
|
config HERMES
|
|
|
|
|
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
|
|
|
|
|
depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
|
|
|
|
|
---help---
|
|
|
|
|
A driver for 802.11b wireless cards based based on the "Hermes" or
|
|
|
|
|
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
|
|
|
|
|
majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
|
|
|
|
|
- except for the Cisco/Aironet cards. Cards supported include the
|
|
|
|
|
Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
|
|
|
|
|
Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
|
|
|
|
|
IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
|
|
|
|
|
MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
|
|
|
|
|
PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
|
|
|
|
|
|
|
|
|
|
This option includes the guts of the driver, but in order to
|
|
|
|
|
actually use a card you will also need to enable support for PCMCIA
|
|
|
|
|
Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
|
|
|
|
|
|
|
|
|
|
You will also very likely also need the Wireless Tools in order to
|
|
|
|
|
configure your card and that /etc/pcmcia/wireless.opts works :
|
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
|
|
|
|
|
|
|
|
|
|
config APPLE_AIRPORT
|
|
|
|
|
tristate "Apple Airport support (built-in)"
|
|
|
|
|
depends on PPC_PMAC && HERMES
|
|
|
|
|
help
|
|
|
|
|
Say Y here to support the Airport 802.11b wireless Ethernet hardware
|
|
|
|
|
built into the Macintosh iBook and other recent PowerPC-based
|
|
|
|
|
Macintosh machines. This is essentially a Lucent Orinoco card with
|
|
|
|
|
a non-standard interface
|
|
|
|
|
|
|
|
|
|
config PLX_HERMES
|
2005-09-02 08:07:52 +08:00
|
|
|
tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
|
|
|
|
|
depends on PCI && HERMES
|
2005-04-17 06:20:36 +08:00
|
|
|
help
|
|
|
|
|
Enable support for PCMCIA cards supported by the "Hermes" (aka
|
|
|
|
|
orinoco) driver when used in PLX9052 based PCI adaptors. These
|
|
|
|
|
adaptors are not a full PCMCIA controller but act as a more limited
|
|
|
|
|
PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
|
|
|
|
|
802.11b PCMCIA cards can be used in desktop machines. The Netgear
|
|
|
|
|
MA301 is such an adaptor.
|
|
|
|
|
|
|
|
|
|
config TMD_HERMES
|
2005-09-02 08:07:52 +08:00
|
|
|
tristate "Hermes in TMD7160 based PCI adaptor support"
|
|
|
|
|
depends on PCI && HERMES
|
2005-04-17 06:20:36 +08:00
|
|
|
help
|
|
|
|
|
Enable support for PCMCIA cards supported by the "Hermes" (aka
|
|
|
|
|
orinoco) driver when used in TMD7160 based PCI adaptors. These
|
|
|
|
|
adaptors are not a full PCMCIA controller but act as a more limited
|
|
|
|
|
PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
|
|
|
|
|
802.11b PCMCIA cards can be used in desktop machines.
|
|
|
|
|
|
2005-09-02 08:08:56 +08:00
|
|
|
config NORTEL_HERMES
|
|
|
|
|
tristate "Nortel emobility PCI adaptor support"
|
|
|
|
|
depends on PCI && HERMES
|
|
|
|
|
help
|
|
|
|
|
Enable support for PCMCIA cards supported by the "Hermes" (aka
|
|
|
|
|
orinoco) driver when used in Nortel emobility PCI adaptors. These
|
|
|
|
|
adaptors are not full PCMCIA controllers, but act as a more limited
|
|
|
|
|
PCI <-> PCMCIA bridge.
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
config PCI_HERMES
|
2005-09-02 08:07:52 +08:00
|
|
|
tristate "Prism 2.5 PCI 802.11b adaptor support"
|
|
|
|
|
depends on PCI && HERMES
|
2005-04-17 06:20:36 +08:00
|
|
|
help
|
|
|
|
|
Enable support for PCI and mini-PCI 802.11b wireless NICs based on
|
|
|
|
|
the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
|
|
|
|
|
PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
|
|
|
|
|
common. Some of the built-in wireless adaptors in laptops are of
|
|
|
|
|
this variety.
|
|
|
|
|
|
|
|
|
|
config ATMEL
|
|
|
|
|
tristate "Atmel at76c50x chipset 802.11b support"
|
2005-10-30 23:50:15 +08:00
|
|
|
depends on NET_RADIO
|
2005-04-17 06:20:36 +08:00
|
|
|
select FW_LOADER
|
|
|
|
|
select CRC32
|
|
|
|
|
---help---
|
|
|
|
|
A driver 802.11b wireless cards based on the Atmel fast-vnet
|
|
|
|
|
chips. This driver supports standard Linux wireless extensions.
|
|
|
|
|
|
|
|
|
|
Many cards based on this chipset do not have flash memory
|
|
|
|
|
and need their firmware loaded at start-up. If yours is
|
|
|
|
|
one of these, you will need to provide a firmware image
|
|
|
|
|
to be loaded into the card by the driver. The Atmel
|
|
|
|
|
firmware package can be downloaded from
|
|
|
|
|
<http://www.thekelleys.org.uk/atmel>
|
|
|
|
|
|
|
|
|
|
config PCI_ATMEL
|
|
|
|
|
tristate "Atmel at76c506 PCI cards"
|
|
|
|
|
depends on ATMEL && PCI
|
|
|
|
|
---help---
|
|
|
|
|
Enable support for PCI and mini-PCI cards containing the
|
|
|
|
|
Atmel at76c506 chip.
|
|
|
|
|
|
|
|
|
|
# If Pcmcia is compiled in, offer Pcmcia cards...
|
|
|
|
|
comment "Wireless 802.11b Pcmcia/Cardbus cards support"
|
|
|
|
|
depends on NET_RADIO && PCMCIA
|
|
|
|
|
|
|
|
|
|
config PCMCIA_HERMES
|
|
|
|
|
tristate "Hermes PCMCIA card support"
|
|
|
|
|
depends on NET_RADIO && PCMCIA && HERMES
|
|
|
|
|
---help---
|
|
|
|
|
A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
|
|
|
|
|
as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
|
|
|
|
|
EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
|
|
|
|
|
others). It should also be usable on various Prism II based cards
|
|
|
|
|
such as the Linksys, D-Link and Farallon Skyline. It should also
|
|
|
|
|
work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
|
|
|
|
|
|
|
|
|
|
To use your PC-cards, you will need supporting software from David
|
|
|
|
|
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
|
|
|
|
|
for location). You also want to check out the PCMCIA-HOWTO,
|
|
|
|
|
available from <http://www.tldp.org/docs.html#howto>.
|
|
|
|
|
|
|
|
|
|
You will also very likely also need the Wireless Tools in order to
|
|
|
|
|
configure your card and that /etc/pcmcia/wireless.opts works:
|
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
|
|
2005-09-02 08:10:06 +08:00
|
|
|
config PCMCIA_SPECTRUM
|
|
|
|
|
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
|
|
|
|
|
depends on NET_RADIO && PCMCIA && HERMES
|
|
|
|
|
---help---
|
|
|
|
|
|
|
|
|
|
This is a driver for 802.11b cards using RAM-loadable Symbol
|
|
|
|
|
firmware, such as Symbol Wireless Networker LA4100, CompactFlash
|
|
|
|
|
cards by Socket Communications and Intel PRO/Wireless 2011B.
|
|
|
|
|
|
|
|
|
|
This driver requires firmware download on startup. Utilities
|
|
|
|
|
for downloading Symbol firmware are available at
|
|
|
|
|
<http://sourceforge.net/projects/orinoco/>
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
config AIRO_CS
|
|
|
|
|
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
|
2005-08-24 05:45:56 +08:00
|
|
|
depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
|
2006-01-21 08:35:15 +08:00
|
|
|
select CRYPTO
|
2005-04-17 06:20:36 +08:00
|
|
|
---help---
|
|
|
|
|
This is the standard Linux driver to support Cisco/Aironet PCMCIA
|
|
|
|
|
802.11 wireless cards. This driver is the same as the Aironet
|
|
|
|
|
driver part of the Linux Pcmcia package.
|
|
|
|
|
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
|
|
|
|
|
- with or without encryption) as well as card before the Cisco
|
2006-02-13 01:53:04 +08:00
|
|
|
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
|
2005-04-17 06:20:36 +08:00
|
|
|
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
|
|
|
|
|
802.11b cards.
|
|
|
|
|
|
|
|
|
|
This driver support both the standard Linux Wireless Extensions
|
|
|
|
|
and Cisco proprietary API, so both the Linux Wireless Tools and the
|
|
|
|
|
Cisco Linux utilities can be used to configure the card.
|
|
|
|
|
|
|
|
|
|
To use your PC-cards, you will need supporting software from David
|
|
|
|
|
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
|
|
|
|
|
for location). You also want to check out the PCMCIA-HOWTO,
|
|
|
|
|
available from <http://www.tldp.org/docs.html#howto>.
|
|
|
|
|
|
|
|
|
|
config PCMCIA_ATMEL
|
|
|
|
|
tristate "Atmel at76c502/at76c504 PCMCIA cards"
|
|
|
|
|
depends on NET_RADIO && ATMEL && PCMCIA
|
|
|
|
|
select FW_LOADER
|
|
|
|
|
select CRC32
|
|
|
|
|
---help---
|
|
|
|
|
Enable support for PCMCIA cards containing the
|
|
|
|
|
Atmel at76c502 and at76c504 chips.
|
|
|
|
|
|
|
|
|
|
config PCMCIA_WL3501
|
|
|
|
|
tristate "Planet WL3501 PCMCIA cards"
|
|
|
|
|
depends on NET_RADIO && EXPERIMENTAL && PCMCIA
|
|
|
|
|
---help---
|
|
|
|
|
A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
|
|
|
|
|
It has basic support for Linux wireless extensions and initial
|
|
|
|
|
micro support for ethtool.
|
|
|
|
|
|
|
|
|
|
comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
|
|
|
|
|
depends on NET_RADIO && PCI
|
|
|
|
|
config PRISM54
|
|
|
|
|
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
|
|
|
|
|
depends on PCI && NET_RADIO && EXPERIMENTAL
|
|
|
|
|
select FW_LOADER
|
|
|
|
|
---help---
|
|
|
|
|
Enable PCI and Cardbus support for the following chipset based cards:
|
|
|
|
|
|
|
|
|
|
ISL3880 - Prism GT 802.11 b/g
|
|
|
|
|
ISL3877 - Prism Indigo 802.11 a
|
|
|
|
|
ISL3890 - Prism Duette 802.11 a/b/g
|
|
|
|
|
|
|
|
|
|
For a complete list of supported cards visit <http://prism54.org>.
|
|
|
|
|
Here is the latest confirmed list of supported cards:
|
|
|
|
|
|
2005-05-06 06:14:09 +08:00
|
|
|
3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
|
2005-04-17 06:20:36 +08:00
|
|
|
Allnet ALL0271 PCI Card
|
|
|
|
|
Compex WL54G Cardbus Card
|
|
|
|
|
Corega CG-WLCB54GT Cardbus Card
|
|
|
|
|
D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
|
|
|
|
|
I-O Data WN-G54/CB Cardbus Card
|
|
|
|
|
Kobishi XG-300 aka Z-Com Cardbus Card
|
|
|
|
|
Netgear WG511 Cardbus Card
|
|
|
|
|
Ovislink WL-5400PCI PCI Card
|
|
|
|
|
Peabird WLG-PCI PCI Card
|
|
|
|
|
Sitecom WL-100i Cardbus Card
|
|
|
|
|
Sitecom WL-110i PCI Card
|
|
|
|
|
SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
|
|
|
|
|
SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
|
|
|
|
|
SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
|
|
|
|
|
Z-Com XG-900 PCI Card
|
|
|
|
|
Zyxel G-100 Cardbus Card
|
|
|
|
|
|
|
|
|
|
If you enable this you will need a firmware file as well.
|
|
|
|
|
You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
|
|
|
|
|
You can get this non-GPL'd firmware file from the Prism54 project page:
|
|
|
|
|
<http://prism54.org>
|
|
|
|
|
You will also need the /etc/hotplug/firmware.agent script from
|
|
|
|
|
a current hotplug package.
|
|
|
|
|
|
|
|
|
|
Note: You need a motherboard with DMA support to use any of these cards
|
|
|
|
|
|
|
|
|
|
If you want to compile the driver as a module ( = code which can be
|
|
|
|
|
inserted in and removed from the running kernel whenever you want),
|
|
|
|
|
say M here and read <file:Documentation/modules.txt>. The module
|
|
|
|
|
will be called prism54.ko.
|
|
|
|
|
|
2005-05-13 10:54:16 +08:00
|
|
|
source "drivers/net/wireless/hostap/Kconfig"
|
2006-02-12 23:47:44 +08:00
|
|
|
source "drivers/net/wireless/bcm43xx/Kconfig"
|
2006-01-24 06:00:39 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
# yes, this works even when no drivers are selected
|
|
|
|
|
config NET_WIRELESS
|
|
|
|
|
bool
|
|
|
|
|
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
endmenu
|
|
|
|
|
|
