OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_panel.c

1509 lines
44 KiB
C
Raw Normal View History

/*
* Copyright © 2006-2010 Intel Corporation
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
* Chris Wilson <chris@chris-wilson.co.uk>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include "intel_drv.h"
void
intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode)
{
drm_mode_copy(adjusted_mode, fixed_mode);
drm_mode_set_crtcinfo(adjusted_mode, 0);
}
/**
* intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
* @dev: drm device
* @fixed_mode : panel native mode
* @connector: LVDS/eDP connector
*
* Return downclock_avail
* Find the reduced downclock for LVDS/eDP in EDID.
*/
struct drm_display_mode *
intel_find_panel_downclock(struct drm_device *dev,
struct drm_display_mode *fixed_mode,
struct drm_connector *connector)
{
struct drm_display_mode *scan, *tmp_mode;
int temp_downclock;
temp_downclock = fixed_mode->clock;
tmp_mode = NULL;
list_for_each_entry(scan, &connector->probed_modes, head) {
/*
* If one mode has the same resolution with the fixed_panel
* mode while they have the different refresh rate, it means
* that the reduced downclock is found. In such
* case we can set the different FPx0/1 to dynamically select
* between low and high frequency.
*/
if (scan->hdisplay == fixed_mode->hdisplay &&
scan->hsync_start == fixed_mode->hsync_start &&
scan->hsync_end == fixed_mode->hsync_end &&
scan->htotal == fixed_mode->htotal &&
scan->vdisplay == fixed_mode->vdisplay &&
scan->vsync_start == fixed_mode->vsync_start &&
scan->vsync_end == fixed_mode->vsync_end &&
scan->vtotal == fixed_mode->vtotal) {
if (scan->clock < temp_downclock) {
/*
* The downclock is already found. But we
* expect to find the lower downclock.
*/
temp_downclock = scan->clock;
tmp_mode = scan;
}
}
}
if (temp_downclock < fixed_mode->clock)
return drm_mode_duplicate(dev, tmp_mode);
else
return NULL;
}
/* adjusted_mode has been preset to be the panel's fixed mode */
void
intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
struct intel_crtc_state *pipe_config,
int fitting_mode)
{
struct drm_display_mode *adjusted_mode;
int x, y, width, height;
adjusted_mode = &pipe_config->base.adjusted_mode;
x = y = width = height = 0;
/* Native modes don't need fitting */
if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
adjusted_mode->vdisplay == pipe_config->pipe_src_h)
goto done;
switch (fitting_mode) {
case DRM_MODE_SCALE_CENTER:
width = pipe_config->pipe_src_w;
height = pipe_config->pipe_src_h;
x = (adjusted_mode->hdisplay - width + 1)/2;
y = (adjusted_mode->vdisplay - height + 1)/2;
break;
case DRM_MODE_SCALE_ASPECT:
/* Scale but preserve the aspect ratio */
{
u32 scaled_width = adjusted_mode->hdisplay
* pipe_config->pipe_src_h;
u32 scaled_height = pipe_config->pipe_src_w
* adjusted_mode->vdisplay;
if (scaled_width > scaled_height) { /* pillar */
width = scaled_height / pipe_config->pipe_src_h;
drm/i915/pch: Fix integer math bugs in panel fitting Consider a 1600x900 panel, upscaling a 1360x768 mode, full-aspect. The old math would give you: scaled_width = 1600 * 768; /* 1228800 */ scaled_height = 1360 * 900; /* 1224000 */ if (scaled_width > scaled_height) { /* pillarbox, and true */ width = 1224000 / 768; /* int(1593.75) = 1593 */ x = (1600 - 1593 + 1) / 2; /* 4 */ y = 0; height = 768; } /* ... */ This is broken. The total width of scanout would then be 1593 + 4 + 4, or 1601, which is wider than the panel itself. The hardware very dutifully implements this, and you end up with a black 45° diagonal from the top-left corner to the bottom edge of the screen. It's a cool effect and all, but not what you wanted. Similar things happen for the letterbox case. The problem is that you have an integer number of pixels, which means it's usually impossible to upscale equally on both axes. 1360/768 is 1.7708, 1600/900 is 1.7777. Since we're constrained on the one axis, the other one wants to come out as an even number of pixels (the panel is almost certainly even on both axes, and the x/y offsets will be applied on both sides). In the math above, if 'width' comes out even, rounding down is correct; if it's odd, you'd rather round up. So just increment width/height in those cases. Tested on a Lenovo T500 (Ironlake). Signed-off-by: Adam Jackson <ajax@redhat.com> Tested-By: Daniel Manrique <daniel.manrique@canonical.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38851 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-14 04:32:32 +08:00
if (width & 1)
width++;
x = (adjusted_mode->hdisplay - width + 1) / 2;
y = 0;
height = adjusted_mode->vdisplay;
} else if (scaled_width < scaled_height) { /* letter */
height = scaled_width / pipe_config->pipe_src_w;
drm/i915/pch: Fix integer math bugs in panel fitting Consider a 1600x900 panel, upscaling a 1360x768 mode, full-aspect. The old math would give you: scaled_width = 1600 * 768; /* 1228800 */ scaled_height = 1360 * 900; /* 1224000 */ if (scaled_width > scaled_height) { /* pillarbox, and true */ width = 1224000 / 768; /* int(1593.75) = 1593 */ x = (1600 - 1593 + 1) / 2; /* 4 */ y = 0; height = 768; } /* ... */ This is broken. The total width of scanout would then be 1593 + 4 + 4, or 1601, which is wider than the panel itself. The hardware very dutifully implements this, and you end up with a black 45° diagonal from the top-left corner to the bottom edge of the screen. It's a cool effect and all, but not what you wanted. Similar things happen for the letterbox case. The problem is that you have an integer number of pixels, which means it's usually impossible to upscale equally on both axes. 1360/768 is 1.7708, 1600/900 is 1.7777. Since we're constrained on the one axis, the other one wants to come out as an even number of pixels (the panel is almost certainly even on both axes, and the x/y offsets will be applied on both sides). In the math above, if 'width' comes out even, rounding down is correct; if it's odd, you'd rather round up. So just increment width/height in those cases. Tested on a Lenovo T500 (Ironlake). Signed-off-by: Adam Jackson <ajax@redhat.com> Tested-By: Daniel Manrique <daniel.manrique@canonical.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38851 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-14 04:32:32 +08:00
if (height & 1)
height++;
y = (adjusted_mode->vdisplay - height + 1) / 2;
x = 0;
width = adjusted_mode->hdisplay;
} else {
x = y = 0;
width = adjusted_mode->hdisplay;
height = adjusted_mode->vdisplay;
}
}
break;
case DRM_MODE_SCALE_FULLSCREEN:
x = y = 0;
width = adjusted_mode->hdisplay;
height = adjusted_mode->vdisplay;
break;
default:
WARN(1, "bad panel fit mode: %d\n", fitting_mode);
return;
}
done:
pipe_config->pch_pfit.pos = (x << 16) | y;
pipe_config->pch_pfit.size = (width << 16) | height;
pipe_config->pch_pfit.enabled = pipe_config->pch_pfit.size != 0;
}
static void
centre_horizontally(struct drm_display_mode *mode,
int width)
{
u32 border, sync_pos, blank_width, sync_width;
/* keep the hsync and hblank widths constant */
sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
sync_pos = (blank_width - sync_width + 1) / 2;
border = (mode->hdisplay - width + 1) / 2;
border += border & 1; /* make the border even */
mode->crtc_hdisplay = width;
mode->crtc_hblank_start = width + border;
mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
}
static void
centre_vertically(struct drm_display_mode *mode,
int height)
{
u32 border, sync_pos, blank_width, sync_width;
/* keep the vsync and vblank widths constant */
sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
sync_pos = (blank_width - sync_width + 1) / 2;
border = (mode->vdisplay - height + 1) / 2;
mode->crtc_vdisplay = height;
mode->crtc_vblank_start = height + border;
mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
}
static inline u32 panel_fitter_scaling(u32 source, u32 target)
{
/*
* Floating point operation is not supported. So the FACTOR
* is defined, which can avoid the floating point computation
* when calculating the panel ratio.
*/
#define ACCURACY 12
#define FACTOR (1 << ACCURACY)
u32 ratio = source * FACTOR / target;
return (FACTOR * ratio + FACTOR/2) / FACTOR;
}
static void i965_scale_aspect(struct intel_crtc_state *pipe_config,
u32 *pfit_control)
{
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
u32 scaled_width = adjusted_mode->hdisplay *
pipe_config->pipe_src_h;
u32 scaled_height = pipe_config->pipe_src_w *
adjusted_mode->vdisplay;
/* 965+ is easy, it does everything in hw */
if (scaled_width > scaled_height)
*pfit_control |= PFIT_ENABLE |
PFIT_SCALING_PILLAR;
else if (scaled_width < scaled_height)
*pfit_control |= PFIT_ENABLE |
PFIT_SCALING_LETTER;
else if (adjusted_mode->hdisplay != pipe_config->pipe_src_w)
*pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
}
static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config,
u32 *pfit_control, u32 *pfit_pgm_ratios,
u32 *border)
{
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
u32 scaled_width = adjusted_mode->hdisplay *
pipe_config->pipe_src_h;
u32 scaled_height = pipe_config->pipe_src_w *
adjusted_mode->vdisplay;
u32 bits;
/*
* For earlier chips we have to calculate the scaling
* ratio by hand and program it into the
* PFIT_PGM_RATIO register
*/
if (scaled_width > scaled_height) { /* pillar */
centre_horizontally(adjusted_mode,
scaled_height /
pipe_config->pipe_src_h);
*border = LVDS_BORDER_ENABLE;
if (pipe_config->pipe_src_h != adjusted_mode->vdisplay) {
bits = panel_fitter_scaling(pipe_config->pipe_src_h,
adjusted_mode->vdisplay);
*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
bits << PFIT_VERT_SCALE_SHIFT);
*pfit_control |= (PFIT_ENABLE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
}
} else if (scaled_width < scaled_height) { /* letter */
centre_vertically(adjusted_mode,
scaled_width /
pipe_config->pipe_src_w);
*border = LVDS_BORDER_ENABLE;
if (pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
bits = panel_fitter_scaling(pipe_config->pipe_src_w,
adjusted_mode->hdisplay);
*pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
bits << PFIT_VERT_SCALE_SHIFT);
*pfit_control |= (PFIT_ENABLE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
}
} else {
/* Aspects match, Let hw scale both directions */
*pfit_control |= (PFIT_ENABLE |
VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
}
}
void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
struct intel_crtc_state *pipe_config,
int fitting_mode)
{
struct drm_device *dev = intel_crtc->base.dev;
u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
struct drm_display_mode *adjusted_mode;
adjusted_mode = &pipe_config->base.adjusted_mode;
/* Native modes don't need fitting */
if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
adjusted_mode->vdisplay == pipe_config->pipe_src_h)
goto out;
switch (fitting_mode) {
case DRM_MODE_SCALE_CENTER:
/*
* For centered modes, we have to calculate border widths &
* heights and modify the values programmed into the CRTC.
*/
centre_horizontally(adjusted_mode, pipe_config->pipe_src_w);
centre_vertically(adjusted_mode, pipe_config->pipe_src_h);
border = LVDS_BORDER_ENABLE;
break;
case DRM_MODE_SCALE_ASPECT:
/* Scale but preserve the aspect ratio */
if (INTEL_INFO(dev)->gen >= 4)
i965_scale_aspect(pipe_config, &pfit_control);
else
i9xx_scale_aspect(pipe_config, &pfit_control,
&pfit_pgm_ratios, &border);
break;
case DRM_MODE_SCALE_FULLSCREEN:
/*
* Full scaling, even if it changes the aspect ratio.
* Fortunately this is all done for us in hw.
*/
if (pipe_config->pipe_src_h != adjusted_mode->vdisplay ||
pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
pfit_control |= PFIT_ENABLE;
if (INTEL_INFO(dev)->gen >= 4)
pfit_control |= PFIT_SCALING_AUTO;
else
pfit_control |= (VERT_AUTO_SCALE |
VERT_INTERP_BILINEAR |
HORIZ_AUTO_SCALE |
HORIZ_INTERP_BILINEAR);
}
break;
default:
WARN(1, "bad panel fit mode: %d\n", fitting_mode);
return;
}
/* 965+ wants fuzzy fitting */
/* FIXME: handle multiple panels by failing gracefully */
if (INTEL_INFO(dev)->gen >= 4)
pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
PFIT_FILTER_FUZZY);
out:
if ((pfit_control & PFIT_ENABLE) == 0) {
pfit_control = 0;
pfit_pgm_ratios = 0;
}
/* Make sure pre-965 set dither correctly for 18bpp panels. */
if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
pfit_control |= PANEL_8TO6_DITHER_ENABLE;
pipe_config->gmch_pfit.control = pfit_control;
pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
pipe_config->gmch_pfit.lvds_border_bits = border;
}
enum drm_connector_status
intel_panel_detect(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* Assume that the BIOS does not lie through the OpRegion... */
if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
connector_status_connected :
connector_status_disconnected;
}
switch (i915.panel_ignore_lid) {
case -2:
return connector_status_connected;
case -1:
return connector_status_disconnected;
default:
return connector_status_unknown;
}
}
/**
* scale - scale values from one range to another
*
* @source_val: value in range [@source_min..@source_max]
*
* Return @source_val in range [@source_min..@source_max] scaled to range
* [@target_min..@target_max].
*/
static uint32_t scale(uint32_t source_val,
uint32_t source_min, uint32_t source_max,
uint32_t target_min, uint32_t target_max)
{
uint64_t target_val;
WARN_ON(source_min > source_max);
WARN_ON(target_min > target_max);
/* defensive */
source_val = clamp(source_val, source_min, source_max);
/* avoid overflows */
target_val = DIV_ROUND_CLOSEST_ULL((uint64_t)(source_val - source_min) *
(target_max - target_min), source_max - source_min);
target_val += target_min;
return target_val;
}
/* Scale user_level in range [0..user_max] to [hw_min..hw_max]. */
static inline u32 scale_user_to_hw(struct intel_connector *connector,
u32 user_level, u32 user_max)
{
struct intel_panel *panel = &connector->panel;
return scale(user_level, 0, user_max,
panel->backlight.min, panel->backlight.max);
}
/* Scale user_level in range [0..user_max] to [0..hw_max], clamping the result
* to [hw_min..hw_max]. */
static inline u32 clamp_user_to_hw(struct intel_connector *connector,
u32 user_level, u32 user_max)
{
struct intel_panel *panel = &connector->panel;
u32 hw_level;
hw_level = scale(user_level, 0, user_max, 0, panel->backlight.max);
hw_level = clamp(hw_level, panel->backlight.min, panel->backlight.max);
return hw_level;
}
/* Scale hw_level in range [hw_min..hw_max] to [0..user_max]. */
static inline u32 scale_hw_to_user(struct intel_connector *connector,
u32 hw_level, u32 user_max)
{
struct intel_panel *panel = &connector->panel;
return scale(hw_level, panel->backlight.min, panel->backlight.max,
0, user_max);
}
static u32 intel_panel_compute_brightness(struct intel_connector *connector,
u32 val)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
WARN_ON(panel->backlight.max == 0);
if (i915.invert_brightness < 0)
return val;
if (i915.invert_brightness > 0 ||
dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) {
return panel->backlight.max - val;
}
return val;
}
static u32 bdw_get_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
return I915_READ(BLC_PWM_PCH_CTL2) & BACKLIGHT_DUTY_CYCLE_MASK;
}
static u32 pch_get_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
return I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
}
static u32 i9xx_get_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 val;
val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
if (INTEL_INFO(dev)->gen < 4)
val >>= 1;
if (panel->backlight.combination_mode) {
u8 lbpc;
pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
val *= lbpc;
}
return val;
}
static u32 _vlv_get_backlight(struct drm_device *dev, enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
return 0;
return I915_READ(VLV_BLC_PWM_CTL(pipe)) & BACKLIGHT_DUTY_CYCLE_MASK;
}
static u32 vlv_get_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
enum pipe pipe = intel_get_pipe_from_connector(connector);
return _vlv_get_backlight(dev, pipe);
}
static u32 bxt_get_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
return I915_READ(BXT_BLC_PWM_DUTY1);
}
static u32 intel_panel_get_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 val = 0;
mutex_lock(&dev_priv->backlight_lock);
if (panel->backlight.enabled) {
val = dev_priv->display.get_backlight(connector);
val = intel_panel_compute_brightness(connector, val);
}
mutex_unlock(&dev_priv->backlight_lock);
DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
return val;
}
static void bdw_set_backlight(struct intel_connector *connector, u32 level)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val = I915_READ(BLC_PWM_PCH_CTL2) & ~BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(BLC_PWM_PCH_CTL2, val | level);
}
static void pch_set_backlight(struct intel_connector *connector, u32 level)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
tmp = I915_READ(BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(BLC_PWM_CPU_CTL, tmp | level);
}
static void i9xx_set_backlight(struct intel_connector *connector, u32 level)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 tmp, mask;
WARN_ON(panel->backlight.max == 0);
if (panel->backlight.combination_mode) {
u8 lbpc;
lbpc = level * 0xfe / panel->backlight.max + 1;
level /= lbpc;
pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc);
}
if (IS_GEN4(dev)) {
mask = BACKLIGHT_DUTY_CYCLE_MASK;
} else {
level <<= 1;
mask = BACKLIGHT_DUTY_CYCLE_MASK_PNV;
}
tmp = I915_READ(BLC_PWM_CTL) & ~mask;
I915_WRITE(BLC_PWM_CTL, tmp | level);
}
static void vlv_set_backlight(struct intel_connector *connector, u32 level)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = intel_get_pipe_from_connector(connector);
u32 tmp;
if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
return;
tmp = I915_READ(VLV_BLC_PWM_CTL(pipe)) & ~BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(VLV_BLC_PWM_CTL(pipe), tmp | level);
}
static void bxt_set_backlight(struct intel_connector *connector, u32 level)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(BXT_BLC_PWM_DUTY1, level);
}
static void
intel_panel_actually_set_backlight(struct intel_connector *connector, u32 level)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
level = intel_panel_compute_brightness(connector, level);
dev_priv->display.set_backlight(connector, level);
}
/* set backlight brightness to level in range [0..max], scaling wrt hw min */
static void intel_panel_set_backlight(struct intel_connector *connector,
u32 user_level, u32 user_max)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 hw_level;
if (!panel->backlight.present)
return;
mutex_lock(&dev_priv->backlight_lock);
WARN_ON(panel->backlight.max == 0);
hw_level = scale_user_to_hw(connector, user_level, user_max);
panel->backlight.level = hw_level;
if (panel->backlight.enabled)
intel_panel_actually_set_backlight(connector, hw_level);
mutex_unlock(&dev_priv->backlight_lock);
}
/* set backlight brightness to level in range [0..max], assuming hw min is
* respected.
*/
void intel_panel_set_backlight_acpi(struct intel_connector *connector,
u32 user_level, u32 user_max)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
enum pipe pipe = intel_get_pipe_from_connector(connector);
u32 hw_level;
/*
* INVALID_PIPE may occur during driver init because
* connection_mutex isn't held across the entire backlight
* setup + modeset readout, and the BIOS can issue the
* requests at any time.
*/
if (!panel->backlight.present || pipe == INVALID_PIPE)
return;
mutex_lock(&dev_priv->backlight_lock);
WARN_ON(panel->backlight.max == 0);
hw_level = clamp_user_to_hw(connector, user_level, user_max);
panel->backlight.level = hw_level;
if (panel->backlight.device)
panel->backlight.device->props.brightness =
scale_hw_to_user(connector,
panel->backlight.level,
panel->backlight.device->props.max_brightness);
if (panel->backlight.enabled)
intel_panel_actually_set_backlight(connector, hw_level);
mutex_unlock(&dev_priv->backlight_lock);
}
static void pch_disable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
intel_panel_actually_set_backlight(connector, 0);
tmp = I915_READ(BLC_PWM_CPU_CTL2);
I915_WRITE(BLC_PWM_CPU_CTL2, tmp & ~BLM_PWM_ENABLE);
tmp = I915_READ(BLC_PWM_PCH_CTL1);
I915_WRITE(BLC_PWM_PCH_CTL1, tmp & ~BLM_PCH_PWM_ENABLE);
}
static void i9xx_disable_backlight(struct intel_connector *connector)
{
intel_panel_actually_set_backlight(connector, 0);
}
static void i965_disable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
intel_panel_actually_set_backlight(connector, 0);
tmp = I915_READ(BLC_PWM_CTL2);
I915_WRITE(BLC_PWM_CTL2, tmp & ~BLM_PWM_ENABLE);
}
static void vlv_disable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = intel_get_pipe_from_connector(connector);
u32 tmp;
if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
return;
intel_panel_actually_set_backlight(connector, 0);
tmp = I915_READ(VLV_BLC_PWM_CTL2(pipe));
I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp & ~BLM_PWM_ENABLE);
}
static void bxt_disable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
intel_panel_actually_set_backlight(connector, 0);
tmp = I915_READ(BXT_BLC_PWM_CTL1);
I915_WRITE(BXT_BLC_PWM_CTL1, tmp & ~BXT_BLC_PWM_ENABLE);
}
void intel_panel_disable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
if (!panel->backlight.present)
return;
/*
* Do not disable backlight on the vgaswitcheroo path. When switching
* away from i915, the other client may depend on i915 to handle the
* backlight. This will leave the backlight on unnecessarily when
* another client is not activated.
*/
if (dev->switch_power_state == DRM_SWITCH_POWER_CHANGING) {
DRM_DEBUG_DRIVER("Skipping backlight disable on vga switch\n");
return;
}
mutex_lock(&dev_priv->backlight_lock);
if (panel->backlight.device)
panel->backlight.device->props.power = FB_BLANK_POWERDOWN;
panel->backlight.enabled = false;
dev_priv->display.disable_backlight(connector);
mutex_unlock(&dev_priv->backlight_lock);
}
static void bdw_enable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 pch_ctl1, pch_ctl2;
pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
if (pch_ctl1 & BLM_PCH_PWM_ENABLE) {
DRM_DEBUG_KMS("pch backlight already enabled\n");
pch_ctl1 &= ~BLM_PCH_PWM_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
}
pch_ctl2 = panel->backlight.max << 16;
I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2);
pch_ctl1 = 0;
if (panel->backlight.active_low_pwm)
pch_ctl1 |= BLM_PCH_POLARITY;
/* After LPT, override is the default. */
if (HAS_PCH_LPT(dev_priv))
pch_ctl1 |= BLM_PCH_OVERRIDE_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
POSTING_READ(BLC_PWM_PCH_CTL1);
I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE);
/* This won't stick until the above enable. */
intel_panel_actually_set_backlight(connector, panel->backlight.level);
}
static void pch_enable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
enum pipe pipe = intel_get_pipe_from_connector(connector);
enum transcoder cpu_transcoder =
intel_pipe_to_cpu_transcoder(dev_priv, pipe);
u32 cpu_ctl2, pch_ctl1, pch_ctl2;
cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2);
if (cpu_ctl2 & BLM_PWM_ENABLE) {
DRM_DEBUG_KMS("cpu backlight already enabled\n");
cpu_ctl2 &= ~BLM_PWM_ENABLE;
I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2);
}
pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
if (pch_ctl1 & BLM_PCH_PWM_ENABLE) {
DRM_DEBUG_KMS("pch backlight already enabled\n");
pch_ctl1 &= ~BLM_PCH_PWM_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
}
if (cpu_transcoder == TRANSCODER_EDP)
cpu_ctl2 = BLM_TRANSCODER_EDP;
else
cpu_ctl2 = BLM_PIPE(cpu_transcoder);
I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2);
POSTING_READ(BLC_PWM_CPU_CTL2);
I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 | BLM_PWM_ENABLE);
/* This won't stick until the above enable. */
intel_panel_actually_set_backlight(connector, panel->backlight.level);
pch_ctl2 = panel->backlight.max << 16;
I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2);
pch_ctl1 = 0;
if (panel->backlight.active_low_pwm)
pch_ctl1 |= BLM_PCH_POLARITY;
I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
POSTING_READ(BLC_PWM_PCH_CTL1);
I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE);
}
static void i9xx_enable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 ctl, freq;
ctl = I915_READ(BLC_PWM_CTL);
if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) {
DRM_DEBUG_KMS("backlight already enabled\n");
I915_WRITE(BLC_PWM_CTL, 0);
}
freq = panel->backlight.max;
if (panel->backlight.combination_mode)
freq /= 0xff;
ctl = freq << 17;
if (panel->backlight.combination_mode)
ctl |= BLM_LEGACY_MODE;
if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm)
ctl |= BLM_POLARITY_PNV;
I915_WRITE(BLC_PWM_CTL, ctl);
POSTING_READ(BLC_PWM_CTL);
/* XXX: combine this into above write? */
intel_panel_actually_set_backlight(connector, panel->backlight.level);
}
static void i965_enable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
enum pipe pipe = intel_get_pipe_from_connector(connector);
u32 ctl, ctl2, freq;
ctl2 = I915_READ(BLC_PWM_CTL2);
if (ctl2 & BLM_PWM_ENABLE) {
DRM_DEBUG_KMS("backlight already enabled\n");
ctl2 &= ~BLM_PWM_ENABLE;
I915_WRITE(BLC_PWM_CTL2, ctl2);
}
freq = panel->backlight.max;
if (panel->backlight.combination_mode)
freq /= 0xff;
ctl = freq << 16;
I915_WRITE(BLC_PWM_CTL, ctl);
ctl2 = BLM_PIPE(pipe);
if (panel->backlight.combination_mode)
ctl2 |= BLM_COMBINATION_MODE;
if (panel->backlight.active_low_pwm)
ctl2 |= BLM_POLARITY_I965;
I915_WRITE(BLC_PWM_CTL2, ctl2);
POSTING_READ(BLC_PWM_CTL2);
I915_WRITE(BLC_PWM_CTL2, ctl2 | BLM_PWM_ENABLE);
intel_panel_actually_set_backlight(connector, panel->backlight.level);
}
static void vlv_enable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
enum pipe pipe = intel_get_pipe_from_connector(connector);
u32 ctl, ctl2;
if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
return;
ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe));
if (ctl2 & BLM_PWM_ENABLE) {
DRM_DEBUG_KMS("backlight already enabled\n");
ctl2 &= ~BLM_PWM_ENABLE;
I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2);
}
ctl = panel->backlight.max << 16;
I915_WRITE(VLV_BLC_PWM_CTL(pipe), ctl);
/* XXX: combine this into above write? */
intel_panel_actually_set_backlight(connector, panel->backlight.level);
ctl2 = 0;
if (panel->backlight.active_low_pwm)
ctl2 |= BLM_POLARITY_I965;
I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2);
POSTING_READ(VLV_BLC_PWM_CTL2(pipe));
I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2 | BLM_PWM_ENABLE);
}
static void bxt_enable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 pwm_ctl;
pwm_ctl = I915_READ(BXT_BLC_PWM_CTL1);
if (pwm_ctl & BXT_BLC_PWM_ENABLE) {
DRM_DEBUG_KMS("backlight already enabled\n");
pwm_ctl &= ~BXT_BLC_PWM_ENABLE;
I915_WRITE(BXT_BLC_PWM_CTL1, pwm_ctl);
}
I915_WRITE(BXT_BLC_PWM_FREQ1, panel->backlight.max);
intel_panel_actually_set_backlight(connector, panel->backlight.level);
pwm_ctl = 0;
if (panel->backlight.active_low_pwm)
pwm_ctl |= BXT_BLC_PWM_POLARITY;
I915_WRITE(BXT_BLC_PWM_CTL1, pwm_ctl);
POSTING_READ(BXT_BLC_PWM_CTL1);
I915_WRITE(BXT_BLC_PWM_CTL1, pwm_ctl | BXT_BLC_PWM_ENABLE);
}
void intel_panel_enable_backlight(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
enum pipe pipe = intel_get_pipe_from_connector(connector);
if (!panel->backlight.present)
return;
DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
mutex_lock(&dev_priv->backlight_lock);
WARN_ON(panel->backlight.max == 0);
if (panel->backlight.level <= panel->backlight.min) {
panel->backlight.level = panel->backlight.max;
if (panel->backlight.device)
panel->backlight.device->props.brightness =
scale_hw_to_user(connector,
panel->backlight.level,
panel->backlight.device->props.max_brightness);
}
dev_priv->display.enable_backlight(connector);
panel->backlight.enabled = true;
if (panel->backlight.device)
panel->backlight.device->props.power = FB_BLANK_UNBLANK;
mutex_unlock(&dev_priv->backlight_lock);
}
#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
static int intel_backlight_device_update_status(struct backlight_device *bd)
{
struct intel_connector *connector = bl_get_data(bd);
struct intel_panel *panel = &connector->panel;
struct drm_device *dev = connector->base.dev;
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
DRM_DEBUG_KMS("updating intel_backlight, brightness=%d/%d\n",
bd->props.brightness, bd->props.max_brightness);
intel_panel_set_backlight(connector, bd->props.brightness,
bd->props.max_brightness);
/*
* Allow flipping bl_power as a sub-state of enabled. Sadly the
* backlight class device does not make it easy to to differentiate
* between callbacks for brightness and bl_power, so our backlight_power
* callback needs to take this into account.
*/
if (panel->backlight.enabled) {
if (panel->backlight_power) {
bool enable = bd->props.power == FB_BLANK_UNBLANK &&
bd->props.brightness != 0;
panel->backlight_power(connector, enable);
}
} else {
bd->props.power = FB_BLANK_POWERDOWN;
}
drm_modeset_unlock(&dev->mode_config.connection_mutex);
return 0;
}
static int intel_backlight_device_get_brightness(struct backlight_device *bd)
{
struct intel_connector *connector = bl_get_data(bd);
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 hw_level;
int ret;
intel_runtime_pm_get(dev_priv);
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
hw_level = intel_panel_get_backlight(connector);
ret = scale_hw_to_user(connector, hw_level, bd->props.max_brightness);
drm_modeset_unlock(&dev->mode_config.connection_mutex);
intel_runtime_pm_put(dev_priv);
return ret;
}
static const struct backlight_ops intel_backlight_device_ops = {
.update_status = intel_backlight_device_update_status,
.get_brightness = intel_backlight_device_get_brightness,
};
static int intel_backlight_device_register(struct intel_connector *connector)
{
struct intel_panel *panel = &connector->panel;
struct backlight_properties props;
if (WARN_ON(panel->backlight.device))
return -ENODEV;
drm/i915: Register the backlight device after the modeset init Currently we register the backlight device as soon as we register the connector. That means we can get backlight requests from userspace already before reading out the current modeset hardware state. That means we don't yet know the current crtc->encoder->connector mapping, which causes problems for VLV/CHV which need to know the current pipe in order to figure out which BLC registers to poke. Currently we just ignore such requests fairly deep in the backlight code which means the backlight device brightness property will get out of sync with our backlight.level and the actual hardware state. Fix the problem by delaying the backlight device registration until the entire modeset init has been performed. And we also move the backlight unregisteration to happen as the first thing during the modeset cleanup so that we also won't be bothered with userspace backlight requested during teardown. This is a real world problem on machines using systemd, because systemd, for some reason, wants to restore the backlight to the level it used last time. And that happens as soon as it sees the backlight device appearing in the system. Sometimes the userspace access makes it through before the modeset init, sometimes not. v2: Do not lie to the user in the debug prints (Jani) Include connector name in the prints (Jani) Fix a typo in the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-07 21:19:46 +08:00
if (!panel->backlight.present)
return 0;
WARN_ON(panel->backlight.max == 0);
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_RAW;
/*
* Note: Everything should work even if the backlight device max
* presented to the userspace is arbitrarily chosen.
*/
props.max_brightness = panel->backlight.max;
props.brightness = scale_hw_to_user(connector,
panel->backlight.level,
props.max_brightness);
if (panel->backlight.enabled)
props.power = FB_BLANK_UNBLANK;
else
props.power = FB_BLANK_POWERDOWN;
/*
* Note: using the same name independent of the connector prevents
* registration of multiple backlight devices in the driver.
*/
panel->backlight.device =
backlight_device_register("intel_backlight",
connector->base.kdev,
connector,
&intel_backlight_device_ops, &props);
if (IS_ERR(panel->backlight.device)) {
DRM_ERROR("Failed to register backlight: %ld\n",
PTR_ERR(panel->backlight.device));
panel->backlight.device = NULL;
return -ENODEV;
}
drm/i915: Register the backlight device after the modeset init Currently we register the backlight device as soon as we register the connector. That means we can get backlight requests from userspace already before reading out the current modeset hardware state. That means we don't yet know the current crtc->encoder->connector mapping, which causes problems for VLV/CHV which need to know the current pipe in order to figure out which BLC registers to poke. Currently we just ignore such requests fairly deep in the backlight code which means the backlight device brightness property will get out of sync with our backlight.level and the actual hardware state. Fix the problem by delaying the backlight device registration until the entire modeset init has been performed. And we also move the backlight unregisteration to happen as the first thing during the modeset cleanup so that we also won't be bothered with userspace backlight requested during teardown. This is a real world problem on machines using systemd, because systemd, for some reason, wants to restore the backlight to the level it used last time. And that happens as soon as it sees the backlight device appearing in the system. Sometimes the userspace access makes it through before the modeset init, sometimes not. v2: Do not lie to the user in the debug prints (Jani) Include connector name in the prints (Jani) Fix a typo in the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-07 21:19:46 +08:00
DRM_DEBUG_KMS("Connector %s backlight sysfs interface registered\n",
connector->base.name);
return 0;
}
static void intel_backlight_device_unregister(struct intel_connector *connector)
{
struct intel_panel *panel = &connector->panel;
if (panel->backlight.device) {
backlight_device_unregister(panel->backlight.device);
panel->backlight.device = NULL;
}
}
#else /* CONFIG_BACKLIGHT_CLASS_DEVICE */
static int intel_backlight_device_register(struct intel_connector *connector)
{
return 0;
}
static void intel_backlight_device_unregister(struct intel_connector *connector)
{
}
#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
/*
* Note: The setup hooks can't assume pipe is set!
*
* XXX: Query mode clock or hardware clock and program PWM modulation frequency
* appropriately when it's 0. Use VBT and/or sane defaults.
*/
static u32 get_backlight_min_vbt(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
int min;
WARN_ON(panel->backlight.max == 0);
/*
* XXX: If the vbt value is 255, it makes min equal to max, which leads
* to problems. There are such machines out there. Either our
* interpretation is wrong or the vbt has bogus data. Or both. Safeguard
* against this by letting the minimum be at most (arbitrarily chosen)
* 25% of the max.
*/
min = clamp_t(int, dev_priv->vbt.backlight.min_brightness, 0, 64);
if (min != dev_priv->vbt.backlight.min_brightness) {
DRM_DEBUG_KMS("clamping VBT min backlight %d/255 to %d/255\n",
dev_priv->vbt.backlight.min_brightness, min);
}
/* vbt value is a coefficient in range [0..255] */
return scale(min, 0, 255, 0, panel->backlight.max);
}
static int bdw_setup_backlight(struct intel_connector *connector, enum pipe unused)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 pch_ctl1, pch_ctl2, val;
pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY;
pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2);
panel->backlight.max = pch_ctl2 >> 16;
if (!panel->backlight.max)
return -ENODEV;
panel->backlight.min = get_backlight_min_vbt(connector);
val = bdw_get_backlight(connector);
panel->backlight.level = intel_panel_compute_brightness(connector, val);
panel->backlight.enabled = (pch_ctl1 & BLM_PCH_PWM_ENABLE) &&
panel->backlight.level != 0;
return 0;
}
static int pch_setup_backlight(struct intel_connector *connector, enum pipe unused)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 cpu_ctl2, pch_ctl1, pch_ctl2, val;
pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY;
pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2);
panel->backlight.max = pch_ctl2 >> 16;
if (!panel->backlight.max)
return -ENODEV;
panel->backlight.min = get_backlight_min_vbt(connector);
val = pch_get_backlight(connector);
panel->backlight.level = intel_panel_compute_brightness(connector, val);
cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2);
panel->backlight.enabled = (cpu_ctl2 & BLM_PWM_ENABLE) &&
(pch_ctl1 & BLM_PCH_PWM_ENABLE) && panel->backlight.level != 0;
return 0;
}
static int i9xx_setup_backlight(struct intel_connector *connector, enum pipe unused)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 ctl, val;
ctl = I915_READ(BLC_PWM_CTL);
if (IS_GEN2(dev) || IS_I915GM(dev) || IS_I945GM(dev))
panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE;
if (IS_PINEVIEW(dev))
panel->backlight.active_low_pwm = ctl & BLM_POLARITY_PNV;
panel->backlight.max = ctl >> 17;
if (panel->backlight.combination_mode)
panel->backlight.max *= 0xff;
if (!panel->backlight.max)
return -ENODEV;
panel->backlight.min = get_backlight_min_vbt(connector);
val = i9xx_get_backlight(connector);
panel->backlight.level = intel_panel_compute_brightness(connector, val);
panel->backlight.enabled = panel->backlight.level != 0;
return 0;
}
static int i965_setup_backlight(struct intel_connector *connector, enum pipe unused)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 ctl, ctl2, val;
ctl2 = I915_READ(BLC_PWM_CTL2);
panel->backlight.combination_mode = ctl2 & BLM_COMBINATION_MODE;
panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965;
ctl = I915_READ(BLC_PWM_CTL);
panel->backlight.max = ctl >> 16;
if (panel->backlight.combination_mode)
panel->backlight.max *= 0xff;
if (!panel->backlight.max)
return -ENODEV;
panel->backlight.min = get_backlight_min_vbt(connector);
val = i9xx_get_backlight(connector);
panel->backlight.level = intel_panel_compute_brightness(connector, val);
panel->backlight.enabled = (ctl2 & BLM_PWM_ENABLE) &&
panel->backlight.level != 0;
return 0;
}
static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
enum pipe p;
u32 ctl, ctl2, val;
for_each_pipe(dev_priv, p) {
u32 cur_val = I915_READ(VLV_BLC_PWM_CTL(p));
/* Skip if the modulation freq is already set */
if (cur_val & ~BACKLIGHT_DUTY_CYCLE_MASK)
continue;
cur_val &= BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(VLV_BLC_PWM_CTL(p), (0xf42 << 16) |
cur_val);
}
if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
return -ENODEV;
ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe));
panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965;
ctl = I915_READ(VLV_BLC_PWM_CTL(pipe));
panel->backlight.max = ctl >> 16;
if (!panel->backlight.max)
return -ENODEV;
panel->backlight.min = get_backlight_min_vbt(connector);
val = _vlv_get_backlight(dev, pipe);
panel->backlight.level = intel_panel_compute_brightness(connector, val);
panel->backlight.enabled = (ctl2 & BLM_PWM_ENABLE) &&
panel->backlight.level != 0;
return 0;
}
static int
bxt_setup_backlight(struct intel_connector *connector, enum pipe unused)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
u32 pwm_ctl, val;
pwm_ctl = I915_READ(BXT_BLC_PWM_CTL1);
panel->backlight.active_low_pwm = pwm_ctl & BXT_BLC_PWM_POLARITY;
panel->backlight.max = I915_READ(BXT_BLC_PWM_FREQ1);
if (!panel->backlight.max)
return -ENODEV;
val = bxt_get_backlight(connector);
panel->backlight.level = intel_panel_compute_brightness(connector, val);
panel->backlight.enabled = (pwm_ctl & BXT_BLC_PWM_ENABLE) &&
panel->backlight.level != 0;
return 0;
}
int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_panel *panel = &intel_connector->panel;
int ret;
drm/i915: do not setup backlight if not available according to VBT Some machines use an external EC for controlling the backlight. Info about this is present in the VBT. Do not setup native backlight control if no PWM backlight is available or supported according to VBT. The acpi_backlight interface appears to work for the EC control. In most cases there has been no harm done, but it looks like there are machines out there that have both an EC and our PWM line connected to the same wire. This, obviously, does not end well. This should fix the regression caused by commit bc0bb9fd1c7810407ab810d204bbaecb255fddde Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Nov 14 12:14:29 2013 +0200 drm/i915: remove QUIRK_NO_PCH_PWM_ENABLE AFAICT the quirk removed by the above commit effectively resulted in i915 not driving the backlight PWM output, thus not messing things up. Additionally this should fix the regression caused by commit fbc9fe1b4f222a7c575e3bd8e9defe59c6190a04 Author: Aaron Lu <aaron.lu@intel.com> Date: Fri Oct 11 21:27:45 2013 +0800 ACPI / video: Do not register backlight if win8 and native interface exists which left some machines without a functioning backlight interface. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76276 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=47941 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=62281 CC: Aaron Lu <aaron.lu@intel.com> CC: Eric Griffith <EGriffith92@gmail.com> CC: Kent Baxley <kent.baxley@canonical.com> Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Martin <bugs@mrvanes.com> Tested-by: jrg.otte@gmail.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-09 16:31:37 +08:00
if (!dev_priv->vbt.backlight.present) {
if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) {
DRM_DEBUG_KMS("no backlight present per VBT, but present per quirk\n");
} else {
DRM_DEBUG_KMS("no backlight present per VBT\n");
return 0;
}
drm/i915: do not setup backlight if not available according to VBT Some machines use an external EC for controlling the backlight. Info about this is present in the VBT. Do not setup native backlight control if no PWM backlight is available or supported according to VBT. The acpi_backlight interface appears to work for the EC control. In most cases there has been no harm done, but it looks like there are machines out there that have both an EC and our PWM line connected to the same wire. This, obviously, does not end well. This should fix the regression caused by commit bc0bb9fd1c7810407ab810d204bbaecb255fddde Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Nov 14 12:14:29 2013 +0200 drm/i915: remove QUIRK_NO_PCH_PWM_ENABLE AFAICT the quirk removed by the above commit effectively resulted in i915 not driving the backlight PWM output, thus not messing things up. Additionally this should fix the regression caused by commit fbc9fe1b4f222a7c575e3bd8e9defe59c6190a04 Author: Aaron Lu <aaron.lu@intel.com> Date: Fri Oct 11 21:27:45 2013 +0800 ACPI / video: Do not register backlight if win8 and native interface exists which left some machines without a functioning backlight interface. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76276 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=47941 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=62281 CC: Aaron Lu <aaron.lu@intel.com> CC: Eric Griffith <EGriffith92@gmail.com> CC: Kent Baxley <kent.baxley@canonical.com> Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Martin <bugs@mrvanes.com> Tested-by: jrg.otte@gmail.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-09 16:31:37 +08:00
}
/* set level and max in panel struct */
mutex_lock(&dev_priv->backlight_lock);
ret = dev_priv->display.setup_backlight(intel_connector, pipe);
mutex_unlock(&dev_priv->backlight_lock);
if (ret) {
DRM_DEBUG_KMS("failed to setup backlight for connector %s\n",
connector->name);
return ret;
}
panel->backlight.present = true;
drm/i915: Register the backlight device after the modeset init Currently we register the backlight device as soon as we register the connector. That means we can get backlight requests from userspace already before reading out the current modeset hardware state. That means we don't yet know the current crtc->encoder->connector mapping, which causes problems for VLV/CHV which need to know the current pipe in order to figure out which BLC registers to poke. Currently we just ignore such requests fairly deep in the backlight code which means the backlight device brightness property will get out of sync with our backlight.level and the actual hardware state. Fix the problem by delaying the backlight device registration until the entire modeset init has been performed. And we also move the backlight unregisteration to happen as the first thing during the modeset cleanup so that we also won't be bothered with userspace backlight requested during teardown. This is a real world problem on machines using systemd, because systemd, for some reason, wants to restore the backlight to the level it used last time. And that happens as soon as it sees the backlight device appearing in the system. Sometimes the userspace access makes it through before the modeset init, sometimes not. v2: Do not lie to the user in the debug prints (Jani) Include connector name in the prints (Jani) Fix a typo in the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-07 21:19:46 +08:00
DRM_DEBUG_KMS("Connector %s backlight initialized, %s, brightness %u/%u\n",
connector->name,
panel->backlight.enabled ? "enabled" : "disabled",
drm/i915: Register the backlight device after the modeset init Currently we register the backlight device as soon as we register the connector. That means we can get backlight requests from userspace already before reading out the current modeset hardware state. That means we don't yet know the current crtc->encoder->connector mapping, which causes problems for VLV/CHV which need to know the current pipe in order to figure out which BLC registers to poke. Currently we just ignore such requests fairly deep in the backlight code which means the backlight device brightness property will get out of sync with our backlight.level and the actual hardware state. Fix the problem by delaying the backlight device registration until the entire modeset init has been performed. And we also move the backlight unregisteration to happen as the first thing during the modeset cleanup so that we also won't be bothered with userspace backlight requested during teardown. This is a real world problem on machines using systemd, because systemd, for some reason, wants to restore the backlight to the level it used last time. And that happens as soon as it sees the backlight device appearing in the system. Sometimes the userspace access makes it through before the modeset init, sometimes not. v2: Do not lie to the user in the debug prints (Jani) Include connector name in the prints (Jani) Fix a typo in the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-07 21:19:46 +08:00
panel->backlight.level, panel->backlight.max);
return 0;
}
void intel_panel_destroy_backlight(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_panel *panel = &intel_connector->panel;
panel->backlight.present = false;
}
/* Set up chip specific backlight functions */
void intel_panel_init_backlight_funcs(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_BROXTON(dev)) {
dev_priv->display.setup_backlight = bxt_setup_backlight;
dev_priv->display.enable_backlight = bxt_enable_backlight;
dev_priv->display.disable_backlight = bxt_disable_backlight;
dev_priv->display.set_backlight = bxt_set_backlight;
dev_priv->display.get_backlight = bxt_get_backlight;
} else if (IS_BROADWELL(dev) || IS_SKYLAKE(dev)) {
dev_priv->display.setup_backlight = bdw_setup_backlight;
dev_priv->display.enable_backlight = bdw_enable_backlight;
dev_priv->display.disable_backlight = pch_disable_backlight;
dev_priv->display.set_backlight = bdw_set_backlight;
dev_priv->display.get_backlight = bdw_get_backlight;
} else if (HAS_PCH_SPLIT(dev)) {
dev_priv->display.setup_backlight = pch_setup_backlight;
dev_priv->display.enable_backlight = pch_enable_backlight;
dev_priv->display.disable_backlight = pch_disable_backlight;
dev_priv->display.set_backlight = pch_set_backlight;
dev_priv->display.get_backlight = pch_get_backlight;
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.setup_backlight = vlv_setup_backlight;
dev_priv->display.enable_backlight = vlv_enable_backlight;
dev_priv->display.disable_backlight = vlv_disable_backlight;
dev_priv->display.set_backlight = vlv_set_backlight;
dev_priv->display.get_backlight = vlv_get_backlight;
} else if (IS_GEN4(dev)) {
dev_priv->display.setup_backlight = i965_setup_backlight;
dev_priv->display.enable_backlight = i965_enable_backlight;
dev_priv->display.disable_backlight = i965_disable_backlight;
dev_priv->display.set_backlight = i9xx_set_backlight;
dev_priv->display.get_backlight = i9xx_get_backlight;
} else {
dev_priv->display.setup_backlight = i9xx_setup_backlight;
dev_priv->display.enable_backlight = i9xx_enable_backlight;
dev_priv->display.disable_backlight = i9xx_disable_backlight;
dev_priv->display.set_backlight = i9xx_set_backlight;
dev_priv->display.get_backlight = i9xx_get_backlight;
}
}
int intel_panel_init(struct intel_panel *panel,
struct drm_display_mode *fixed_mode,
struct drm_display_mode *downclock_mode)
{
panel->fixed_mode = fixed_mode;
panel->downclock_mode = downclock_mode;
return 0;
}
void intel_panel_fini(struct intel_panel *panel)
{
struct intel_connector *intel_connector =
container_of(panel, struct intel_connector, panel);
if (panel->fixed_mode)
drm_mode_destroy(intel_connector->base.dev, panel->fixed_mode);
if (panel->downclock_mode)
drm_mode_destroy(intel_connector->base.dev,
panel->downclock_mode);
}
drm/i915: Register the backlight device after the modeset init Currently we register the backlight device as soon as we register the connector. That means we can get backlight requests from userspace already before reading out the current modeset hardware state. That means we don't yet know the current crtc->encoder->connector mapping, which causes problems for VLV/CHV which need to know the current pipe in order to figure out which BLC registers to poke. Currently we just ignore such requests fairly deep in the backlight code which means the backlight device brightness property will get out of sync with our backlight.level and the actual hardware state. Fix the problem by delaying the backlight device registration until the entire modeset init has been performed. And we also move the backlight unregisteration to happen as the first thing during the modeset cleanup so that we also won't be bothered with userspace backlight requested during teardown. This is a real world problem on machines using systemd, because systemd, for some reason, wants to restore the backlight to the level it used last time. And that happens as soon as it sees the backlight device appearing in the system. Sometimes the userspace access makes it through before the modeset init, sometimes not. v2: Do not lie to the user in the debug prints (Jani) Include connector name in the prints (Jani) Fix a typo in the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-07 21:19:46 +08:00
void intel_backlight_register(struct drm_device *dev)
{
struct intel_connector *connector;
list_for_each_entry(connector, &dev->mode_config.connector_list, base.head)
intel_backlight_device_register(connector);
}
void intel_backlight_unregister(struct drm_device *dev)
{
struct intel_connector *connector;
list_for_each_entry(connector, &dev->mode_config.connector_list, base.head)
intel_backlight_device_unregister(connector);
}