OpenCloudOS-Kernel/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c

533 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver.
*
* Copyright (c) 2014-2017 Samsung Electronics Co., Ltd
*
* Inki Dae <inki.dae@samsung.com>
* Hoegeun Kwon <hoegeun.kwon@samsung.com>
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>
#define MCS_LEVEL2_KEY 0xf0
#define MCS_MTP_KEY 0xf1
#define MCS_MTP_SET3 0xd4
#define MAX_BRIGHTNESS 100
#define DEFAULT_BRIGHTNESS 80
#define NUM_GAMMA_STEPS 9
#define GAMMA_CMD_CNT 28
#define FIRST_COLUMN 20
struct s6e63j0x03 {
struct device *dev;
struct drm_panel panel;
struct backlight_device *bl_dev;
struct regulator_bulk_data supplies[2];
struct gpio_desc *reset_gpio;
};
static const struct drm_display_mode default_mode = {
.clock = 4649,
.hdisplay = 320,
.hsync_start = 320 + 1,
.hsync_end = 320 + 1 + 1,
.htotal = 320 + 1 + 1 + 1,
.vdisplay = 320,
.vsync_start = 320 + 150,
.vsync_end = 320 + 150 + 1,
.vtotal = 320 + 150 + 1 + 2,
.flags = 0,
};
static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = {
{ /* Gamma 10 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26,
0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36,
0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf
},
{ /* gamma 30 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26,
0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34,
0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc
},
{ /* gamma 60 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a,
0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33,
0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5
},
{ /* gamma 90 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29,
0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31,
0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09
},
{ /* gamma 120 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28,
0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31,
0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b
},
{ /* gamma 150 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28,
0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31,
0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29
},
{ /* gamma 200 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29,
0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30,
0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b
},
{ /* gamma 240 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a,
0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30,
0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47
},
{ /* gamma 300 */
MCS_MTP_SET3,
0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28,
0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f,
0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57
}
};
static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel)
{
return container_of(panel, struct s6e63j0x03, panel);
}
static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx,
const void *seq, size_t len)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
return mipi_dsi_dcs_write_buffer(dsi, seq, len);
}
#define s6e63j0x03_dcs_write_seq_static(ctx, seq...) \
({ \
static const u8 d[] = { seq }; \
s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \
})
static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx)
{
return s6e63j0x03_dcs_write_seq_static(ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a);
}
static inline int s6e63j0x03_apply_mtp_key(struct s6e63j0x03 *ctx, bool on)
{
if (on)
return s6e63j0x03_dcs_write_seq_static(ctx,
MCS_MTP_KEY, 0x5a, 0x5a);
return s6e63j0x03_dcs_write_seq_static(ctx, MCS_MTP_KEY, 0xa5, 0xa5);
}
static int s6e63j0x03_power_on(struct s6e63j0x03 *ctx)
{
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
if (ret < 0)
return ret;
msleep(30);
gpiod_set_value(ctx->reset_gpio, 1);
usleep_range(1000, 2000);
gpiod_set_value(ctx->reset_gpio, 0);
usleep_range(5000, 6000);
return 0;
}
static int s6e63j0x03_power_off(struct s6e63j0x03 *ctx)
{
return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
}
static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)
{
unsigned int index;
index = brightness / (MAX_BRIGHTNESS / NUM_GAMMA_STEPS);
if (index >= NUM_GAMMA_STEPS)
index = NUM_GAMMA_STEPS - 1;
return index;
}
static int s6e63j0x03_update_gamma(struct s6e63j0x03 *ctx,
unsigned int brightness)
{
struct backlight_device *bl_dev = ctx->bl_dev;
unsigned int index = s6e63j0x03_get_brightness_index(brightness);
int ret;
ret = s6e63j0x03_apply_mtp_key(ctx, true);
if (ret < 0)
return ret;
ret = s6e63j0x03_dcs_write_seq(ctx, gamma_tbl[index], GAMMA_CMD_CNT);
if (ret < 0)
return ret;
ret = s6e63j0x03_apply_mtp_key(ctx, false);
if (ret < 0)
return ret;
bl_dev->props.brightness = brightness;
return 0;
}
static int s6e63j0x03_set_brightness(struct backlight_device *bl_dev)
{
struct s6e63j0x03 *ctx = bl_get_data(bl_dev);
unsigned int brightness = bl_dev->props.brightness;
return s6e63j0x03_update_gamma(ctx, brightness);
}
static const struct backlight_ops s6e63j0x03_bl_ops = {
.update_status = s6e63j0x03_set_brightness,
};
static int s6e63j0x03_disable(struct drm_panel *panel)
{
struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
return ret;
ctx->bl_dev->props.power = FB_BLANK_NORMAL;
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0)
return ret;
msleep(120);
return 0;
}
static int s6e63j0x03_unprepare(struct drm_panel *panel)
{
struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
int ret;
ret = s6e63j0x03_power_off(ctx);
if (ret < 0)
return ret;
ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
return 0;
}
static int s6e63j0x03_panel_init(struct s6e63j0x03 *ctx)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
ret = s6e63j0x03_enable_lv2_command(ctx);
if (ret < 0)
return ret;
ret = s6e63j0x03_apply_mtp_key(ctx, true);
if (ret < 0)
return ret;
/* set porch adjustment */
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xf2, 0x1c, 0x28);
if (ret < 0)
return ret;
/* set frame freq */
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb5, 0x00, 0x02, 0x00);
if (ret < 0)
return ret;
/* set caset, paset */
ret = mipi_dsi_dcs_set_column_address(dsi, FIRST_COLUMN,
default_mode.hdisplay - 1 + FIRST_COLUMN);
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_set_page_address(dsi, 0, default_mode.vdisplay - 1);
if (ret < 0)
return ret;
/* set ltps timming 0, 1 */
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xf8, 0x08, 0x08, 0x08, 0x17,
0x00, 0x2a, 0x02, 0x26, 0x00, 0x00, 0x02, 0x00, 0x00);
if (ret < 0)
return ret;
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xf7, 0x02);
if (ret < 0)
return ret;
/* set param pos te_edge */
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb0, 0x01);
if (ret < 0)
return ret;
/* set te rising edge */
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xe2, 0x0f);
if (ret < 0)
return ret;
/* set param pos default */
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb0, 0x00);
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0)
return ret;
ret = s6e63j0x03_apply_mtp_key(ctx, false);
if (ret < 0)
return ret;
return 0;
}
static int s6e63j0x03_prepare(struct drm_panel *panel)
{
struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
int ret;
ret = s6e63j0x03_power_on(ctx);
if (ret < 0)
return ret;
ret = s6e63j0x03_panel_init(ctx);
if (ret < 0)
goto err;
ctx->bl_dev->props.power = FB_BLANK_NORMAL;
return 0;
err:
s6e63j0x03_power_off(ctx);
return ret;
}
static int s6e63j0x03_enable(struct drm_panel *panel)
{
struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
msleep(120);
ret = s6e63j0x03_apply_mtp_key(ctx, true);
if (ret < 0)
return ret;
/* set elvss_cond */
ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb1, 0x00, 0x09);
if (ret < 0)
return ret;
/* set pos */
ret = s6e63j0x03_dcs_write_seq_static(ctx,
MIPI_DCS_SET_ADDRESS_MODE, 0x40);
if (ret < 0)
return ret;
/* set default white brightness */
ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff);
if (ret < 0)
return ret;
/* set white ctrl */
ret = s6e63j0x03_dcs_write_seq_static(ctx,
MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
if (ret < 0)
return ret;
/* set acl off */
ret = s6e63j0x03_dcs_write_seq_static(ctx,
MIPI_DCS_WRITE_POWER_SAVE, 0x00);
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
if (ret < 0)
return ret;
ret = s6e63j0x03_apply_mtp_key(ctx, false);
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0)
return ret;
ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
return 0;
}
static int s6e63j0x03_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct drm_display_mode *mode;
drm/panel: drop drm_device from drm_panel The panel drivers used drm_panel.drm for two purposes: 1) Argument to drm_mode_duplicate() 2) drm->dev was used in error messages The first usage is replaced with drm_connector.dev - drm_connector is already connected to a drm_device and we have a valid connector The second usage is replaced with drm_panel.dev - this makes drivers more consistent in their dev argument used for dev_err() and friends With these replacements there are no more uses of drm_panel.drm, so it is removed from struct drm_panel. With this change drm_panel_attach() and drm_panel_detach() no longer have any use as they are empty functions. v2: - editorial correction in changelog (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
2019-12-07 22:03:35 +08:00
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
DRM_ERROR("failed to add mode %ux%ux@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
drm: Nuke mode->vrefresh Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
2020-04-29 01:19:27 +08:00
drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
connector->display_info.width_mm = 29;
connector->display_info.height_mm = 29;
return 1;
}
static const struct drm_panel_funcs s6e63j0x03_funcs = {
.disable = s6e63j0x03_disable,
.unprepare = s6e63j0x03_unprepare,
.prepare = s6e63j0x03_prepare,
.enable = s6e63j0x03_enable,
.get_modes = s6e63j0x03_get_modes,
};
static int s6e63j0x03_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct s6e63j0x03 *ctx;
int ret;
ctx = devm_kzalloc(dev, sizeof(struct s6e63j0x03), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
dsi->lanes = 1;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_EOT_PACKET;
ctx->supplies[0].supply = "vdd3";
ctx->supplies[1].supply = "vci";
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
ctx->supplies);
if (ret < 0) {
dev_err(dev, "failed to get regulators: %d\n", ret);
return ret;
}
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset-gpio: %ld\n",
PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
drm_panel_init(&ctx->panel, dev, &s6e63j0x03_funcs,
DRM_MODE_CONNECTOR_DSI);
ctx->bl_dev = backlight_device_register("s6e63j0x03", dev, ctx,
&s6e63j0x03_bl_ops, NULL);
if (IS_ERR(ctx->bl_dev)) {
dev_err(dev, "failed to register backlight device\n");
return PTR_ERR(ctx->bl_dev);
}
ctx->bl_dev->props.max_brightness = MAX_BRIGHTNESS;
ctx->bl_dev->props.brightness = DEFAULT_BRIGHTNESS;
ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
ret = drm_panel_add(&ctx->panel);
if (ret < 0)
goto unregister_backlight;
ret = mipi_dsi_attach(dsi);
if (ret < 0)
goto remove_panel;
return ret;
remove_panel:
drm_panel_remove(&ctx->panel);
unregister_backlight:
backlight_device_unregister(ctx->bl_dev);
return ret;
}
static int s6e63j0x03_remove(struct mipi_dsi_device *dsi)
{
struct s6e63j0x03 *ctx = mipi_dsi_get_drvdata(dsi);
mipi_dsi_detach(dsi);
drm_panel_remove(&ctx->panel);
backlight_device_unregister(ctx->bl_dev);
return 0;
}
static const struct of_device_id s6e63j0x03_of_match[] = {
{ .compatible = "samsung,s6e63j0x03" },
{ }
};
MODULE_DEVICE_TABLE(of, s6e63j0x03_of_match);
static struct mipi_dsi_driver s6e63j0x03_driver = {
.probe = s6e63j0x03_probe,
.remove = s6e63j0x03_remove,
.driver = {
.name = "panel_samsung_s6e63j0x03",
.of_match_table = s6e63j0x03_of_match,
},
};
module_mipi_dsi_driver(s6e63j0x03_driver);
MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
MODULE_AUTHOR("Hoegeun Kwon <hoegeun.kwon@samsung.com>");
MODULE_DESCRIPTION("MIPI-DSI based s6e63j0x03 AMOLED LCD Panel Driver");
MODULE_LICENSE("GPL v2");