OpenCloudOS-Kernel/drivers/gpu/drm/i915/display/intel_dsi_vbt.c

909 lines
27 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Shobhit Kumar <shobhit.kumar@intel.com>
*
*/
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/mfd/intel_soc_pmic.h>
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/slab.h>
#include <asm/intel-mid.h>
#include <asm/unaligned.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/i915_drm.h>
#include <video/mipi_display.h>
#include "i915_drv.h"
#include "intel_display_types.h"
#include "intel_dsi.h"
#include "intel_sideband.h"
#define MIPI_TRANSFER_MODE_SHIFT 0
#define MIPI_VIRTUAL_CHANNEL_SHIFT 1
#define MIPI_PORT_SHIFT 3
/* base offsets for gpio pads */
#define VLV_GPIO_NC_0_HV_DDI0_HPD 0x4130
#define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA 0x4120
#define VLV_GPIO_NC_2_HV_DDI0_DDC_SCL 0x4110
#define VLV_GPIO_NC_3_PANEL0_VDDEN 0x4140
#define VLV_GPIO_NC_4_PANEL0_BKLTEN 0x4150
#define VLV_GPIO_NC_5_PANEL0_BKLTCTL 0x4160
#define VLV_GPIO_NC_6_HV_DDI1_HPD 0x4180
#define VLV_GPIO_NC_7_HV_DDI1_DDC_SDA 0x4190
#define VLV_GPIO_NC_8_HV_DDI1_DDC_SCL 0x4170
#define VLV_GPIO_NC_9_PANEL1_VDDEN 0x4100
#define VLV_GPIO_NC_10_PANEL1_BKLTEN 0x40E0
#define VLV_GPIO_NC_11_PANEL1_BKLTCTL 0x40F0
#define VLV_GPIO_PCONF0(base_offset) (base_offset)
#define VLV_GPIO_PAD_VAL(base_offset) ((base_offset) + 8)
struct gpio_map {
u16 base_offset;
bool init;
};
static struct gpio_map vlv_gpio_table[] = {
{ VLV_GPIO_NC_0_HV_DDI0_HPD },
{ VLV_GPIO_NC_1_HV_DDI0_DDC_SDA },
{ VLV_GPIO_NC_2_HV_DDI0_DDC_SCL },
{ VLV_GPIO_NC_3_PANEL0_VDDEN },
{ VLV_GPIO_NC_4_PANEL0_BKLTEN },
{ VLV_GPIO_NC_5_PANEL0_BKLTCTL },
{ VLV_GPIO_NC_6_HV_DDI1_HPD },
{ VLV_GPIO_NC_7_HV_DDI1_DDC_SDA },
{ VLV_GPIO_NC_8_HV_DDI1_DDC_SCL },
{ VLV_GPIO_NC_9_PANEL1_VDDEN },
{ VLV_GPIO_NC_10_PANEL1_BKLTEN },
{ VLV_GPIO_NC_11_PANEL1_BKLTCTL },
};
2020-01-11 02:11:23 +08:00
struct i2c_adapter_lookup {
u16 slave_addr;
struct intel_dsi *intel_dsi;
acpi_handle dev_handle;
};
#define CHV_GPIO_IDX_START_N 0
#define CHV_GPIO_IDX_START_E 73
#define CHV_GPIO_IDX_START_SW 100
#define CHV_GPIO_IDX_START_SE 198
#define CHV_VBT_MAX_PINS_PER_FMLY 15
#define CHV_GPIO_PAD_CFG0(f, i) (0x4400 + (f) * 0x400 + (i) * 8)
#define CHV_GPIO_GPIOEN (1 << 15)
#define CHV_GPIO_GPIOCFG_GPIO (0 << 8)
#define CHV_GPIO_GPIOCFG_GPO (1 << 8)
#define CHV_GPIO_GPIOCFG_GPI (2 << 8)
#define CHV_GPIO_GPIOCFG_HIZ (3 << 8)
#define CHV_GPIO_GPIOTXSTATE(state) ((!!(state)) << 1)
#define CHV_GPIO_PAD_CFG1(f, i) (0x4400 + (f) * 0x400 + (i) * 8 + 4)
#define CHV_GPIO_CFGLOCK (1 << 31)
/* ICL DSI Display GPIO Pins */
#define ICL_GPIO_DDSP_HPD_A 0
#define ICL_GPIO_L_VDDEN_1 1
#define ICL_GPIO_L_BKLTEN_1 2
#define ICL_GPIO_DDPA_CTRLCLK_1 3
#define ICL_GPIO_DDPA_CTRLDATA_1 4
#define ICL_GPIO_DDSP_HPD_B 5
#define ICL_GPIO_L_VDDEN_2 6
#define ICL_GPIO_L_BKLTEN_2 7
#define ICL_GPIO_DDPA_CTRLCLK_2 8
#define ICL_GPIO_DDPA_CTRLDATA_2 9
static inline enum port intel_dsi_seq_port_to_port(u8 port)
{
return port ? PORT_C : PORT_A;
}
static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,
const u8 *data)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
struct mipi_dsi_device *dsi_device;
u8 type, flags, seq_port;
u16 len;
enum port port;
DRM_DEBUG_KMS("\n");
flags = *data++;
type = *data++;
len = *((u16 *) data);
data += 2;
seq_port = (flags >> MIPI_PORT_SHIFT) & 3;
/* For DSI single link on Port A & C, the seq_port value which is
* parsed from Sequence Block#53 of VBT has been set to 0
* Now, read/write of packets for the DSI single link on Port A and
* Port C will based on the DVO port from VBT block 2.
*/
if (intel_dsi->ports == (1 << PORT_C))
port = PORT_C;
else
port = intel_dsi_seq_port_to_port(seq_port);
dsi_device = intel_dsi->dsi_hosts[port]->device;
if (!dsi_device) {
DRM_DEBUG_KMS("no dsi device for port %c\n", port_name(port));
goto out;
}
if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1)
dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
else
dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;
dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3;
switch (type) {
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
mipi_dsi_generic_write(dsi_device, NULL, 0);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
mipi_dsi_generic_write(dsi_device, data, 1);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
mipi_dsi_generic_write(dsi_device, data, 2);
break;
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
DRM_DEBUG_DRIVER("Generic Read not yet implemented or used\n");
break;
case MIPI_DSI_GENERIC_LONG_WRITE:
mipi_dsi_generic_write(dsi_device, data, len);
break;
case MIPI_DSI_DCS_SHORT_WRITE:
mipi_dsi_dcs_write_buffer(dsi_device, data, 1);
break;
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
mipi_dsi_dcs_write_buffer(dsi_device, data, 2);
break;
case MIPI_DSI_DCS_READ:
DRM_DEBUG_DRIVER("DCS Read not yet implemented or used\n");
break;
case MIPI_DSI_DCS_LONG_WRITE:
mipi_dsi_dcs_write_buffer(dsi_device, data, len);
break;
}
2019-03-09 05:42:58 +08:00
if (INTEL_GEN(dev_priv) < 11)
vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
out:
data += len;
return data;
}
static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
{
u32 delay = *((const u32 *) data);
DRM_DEBUG_KMS("\n");
usleep_range(delay, delay + 10);
data += 4;
return data;
}
static void vlv_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
struct gpio_map *map;
u16 pconf0, padval;
u32 tmp;
u8 port;
if (gpio_index >= ARRAY_SIZE(vlv_gpio_table)) {
DRM_DEBUG_KMS("unknown gpio index %u\n", gpio_index);
return;
}
map = &vlv_gpio_table[gpio_index];
if (dev_priv->vbt.dsi.seq_version >= 3) {
/* XXX: this assumes vlv_gpio_table only has NC GPIOs. */
port = IOSF_PORT_GPIO_NC;
} else {
if (gpio_source == 0) {
port = IOSF_PORT_GPIO_NC;
} else if (gpio_source == 1) {
DRM_DEBUG_KMS("SC gpio not supported\n");
return;
} else {
DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
return;
}
}
pconf0 = VLV_GPIO_PCONF0(map->base_offset);
padval = VLV_GPIO_PAD_VAL(map->base_offset);
vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
if (!map->init) {
/* FIXME: remove constant below */
vlv_iosf_sb_write(dev_priv, port, pconf0, 0x2000CC00);
map->init = true;
}
tmp = 0x4 | value;
vlv_iosf_sb_write(dev_priv, port, padval, tmp);
vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
}
static void chv_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
u16 cfg0, cfg1;
u16 family_num;
u8 port;
if (dev_priv->vbt.dsi.seq_version >= 3) {
if (gpio_index >= CHV_GPIO_IDX_START_SE) {
/* XXX: it's unclear whether 255->57 is part of SE. */
gpio_index -= CHV_GPIO_IDX_START_SE;
port = CHV_IOSF_PORT_GPIO_SE;
} else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
gpio_index -= CHV_GPIO_IDX_START_SW;
port = CHV_IOSF_PORT_GPIO_SW;
} else if (gpio_index >= CHV_GPIO_IDX_START_E) {
gpio_index -= CHV_GPIO_IDX_START_E;
port = CHV_IOSF_PORT_GPIO_E;
} else {
port = CHV_IOSF_PORT_GPIO_N;
}
} else {
/* XXX: The spec is unclear about CHV GPIO on seq v2 */
if (gpio_source != 0) {
DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
return;
}
if (gpio_index >= CHV_GPIO_IDX_START_E) {
DRM_DEBUG_KMS("invalid gpio index %u for GPIO N\n",
gpio_index);
return;
}
port = CHV_IOSF_PORT_GPIO_N;
}
family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY;
gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY;
cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index);
cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index);
vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
vlv_iosf_sb_write(dev_priv, port, cfg1, 0);
vlv_iosf_sb_write(dev_priv, port, cfg0,
CHV_GPIO_GPIOEN | CHV_GPIO_GPIOCFG_GPO |
CHV_GPIO_GPIOTXSTATE(value));
vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
}
static void bxt_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
/* XXX: this table is a quick ugly hack. */
static struct gpio_desc *bxt_gpio_table[U8_MAX + 1];
struct gpio_desc *gpio_desc = bxt_gpio_table[gpio_index];
if (!gpio_desc) {
gpio_desc = devm_gpiod_get_index(dev_priv->drm.dev,
NULL, gpio_index,
value ? GPIOD_OUT_LOW :
GPIOD_OUT_HIGH);
if (IS_ERR_OR_NULL(gpio_desc)) {
DRM_ERROR("GPIO index %u request failed (%ld)\n",
gpio_index, PTR_ERR(gpio_desc));
return;
}
bxt_gpio_table[gpio_index] = gpio_desc;
}
gpiod_set_value(gpio_desc, value);
}
static void icl_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
DRM_DEBUG_KMS("Skipping ICL GPIO element execution\n");
}
static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u8 gpio_source, gpio_index = 0, gpio_number;
bool value;
DRM_DEBUG_KMS("\n");
if (dev_priv->vbt.dsi.seq_version >= 3)
gpio_index = *data++;
gpio_number = *data++;
/* gpio source in sequence v2 only */
if (dev_priv->vbt.dsi.seq_version == 2)
gpio_source = (*data >> 1) & 3;
else
gpio_source = 0;
/* pull up/down */
value = *data++ & 1;
2019-03-09 05:42:58 +08:00
if (INTEL_GEN(dev_priv) >= 11)
icl_exec_gpio(dev_priv, gpio_source, gpio_index, value);
else if (IS_VALLEYVIEW(dev_priv))
vlv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
else if (IS_CHERRYVIEW(dev_priv))
chv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
else
bxt_exec_gpio(dev_priv, gpio_source, gpio_index, value);
return data;
}
#ifdef CONFIG_ACPI
2020-01-11 02:11:23 +08:00
static int i2c_adapter_lookup(struct acpi_resource *ares, void *data)
{
struct i2c_adapter_lookup *lookup = data;
struct intel_dsi *intel_dsi = lookup->intel_dsi;
struct acpi_resource_i2c_serialbus *sb;
struct i2c_adapter *adapter;
acpi_handle adapter_handle;
acpi_status status;
if (!i2c_acpi_get_i2c_resource(ares, &sb))
2020-01-11 02:11:23 +08:00
return 1;
if (lookup->slave_addr != sb->slave_address)
return 1;
status = acpi_get_handle(lookup->dev_handle,
sb->resource_source.string_ptr,
&adapter_handle);
if (ACPI_FAILURE(status))
return 1;
adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
if (adapter)
intel_dsi->i2c_bus_num = adapter->nr;
return 1;
}
static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
const u16 slave_addr)
{
2020-01-11 02:11:23 +08:00
struct drm_device *drm_dev = intel_dsi->base.base.dev;
struct device *dev = &drm_dev->pdev->dev;
struct acpi_device *acpi_dev;
struct list_head resource_list;
struct i2c_adapter_lookup lookup;
acpi_dev = ACPI_COMPANION(dev);
if (acpi_dev) {
memset(&lookup, 0, sizeof(lookup));
lookup.slave_addr = slave_addr;
lookup.intel_dsi = intel_dsi;
lookup.dev_handle = acpi_device_handle(acpi_dev);
INIT_LIST_HEAD(&resource_list);
acpi_dev_get_resources(acpi_dev, &resource_list,
i2c_adapter_lookup,
&lookup);
acpi_dev_free_resource_list(&resource_list);
}
}
#else
static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
const u16 slave_addr)
{
}
#endif
static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_device *drm_dev = intel_dsi->base.base.dev;
struct device *dev = &drm_dev->pdev->dev;
struct i2c_adapter *adapter;
2020-01-11 02:11:23 +08:00
struct i2c_msg msg;
int ret;
u8 vbt_i2c_bus_num = *(data + 2);
u16 slave_addr = *(u16 *)(data + 3);
u8 reg_offset = *(data + 5);
u8 payload_size = *(data + 6);
u8 *payload_data;
if (intel_dsi->i2c_bus_num < 0) {
intel_dsi->i2c_bus_num = vbt_i2c_bus_num;
i2c_acpi_find_adapter(intel_dsi, slave_addr);
2020-01-11 02:11:23 +08:00
}
2020-01-11 02:11:23 +08:00
adapter = i2c_get_adapter(intel_dsi->i2c_bus_num);
if (!adapter) {
DRM_DEV_ERROR(dev, "Cannot find a valid i2c bus for xfer\n");
goto err_bus;
}
payload_data = kzalloc(payload_size + 1, GFP_KERNEL);
if (!payload_data)
goto err_alloc;
payload_data[0] = reg_offset;
memcpy(&payload_data[1], (data + 7), payload_size);
msg.addr = slave_addr;
msg.flags = 0;
msg.len = payload_size + 1;
msg.buf = payload_data;
ret = i2c_transfer(adapter, &msg, 1);
if (ret < 0)
DRM_DEV_ERROR(dev,
"Failed to xfer payload of size (%u) to reg (%u)\n",
payload_size, reg_offset);
kfree(payload_data);
err_alloc:
i2c_put_adapter(adapter);
err_bus:
return data + payload_size + 7;
}
static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data)
{
DRM_DEBUG_KMS("Skipping SPI element execution\n");
return data + *(data + 5) + 6;
}
static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data)
{
#ifdef CONFIG_PMIC_OPREGION
u32 value, mask, reg_address;
u16 i2c_address;
int ret;
/* byte 0 aka PMIC Flag is reserved */
i2c_address = get_unaligned_le16(data + 1);
reg_address = get_unaligned_le32(data + 3);
value = get_unaligned_le32(data + 7);
mask = get_unaligned_le32(data + 11);
ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address,
reg_address,
value, mask);
if (ret)
DRM_ERROR("%s failed, error: %d\n", __func__, ret);
#else
DRM_ERROR("Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n");
#endif
return data + 15;
}
typedef const u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi,
const u8 *data);
static const fn_mipi_elem_exec exec_elem[] = {
[MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet,
[MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay,
[MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio,
[MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c,
[MIPI_SEQ_ELEM_SPI] = mipi_exec_spi,
[MIPI_SEQ_ELEM_PMIC] = mipi_exec_pmic,
};
/*
* MIPI Sequence from VBT #53 parsing logic
* We have already separated each seqence during bios parsing
* Following is generic execution function for any sequence
*/
static const char * const seq_name[] = {
drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET Looking at the ADF code from the Android kernel sources for a cherrytrail tablet I noticed that it is calling the MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook. Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences in panel prepare/unprepare hooks") the mainline i915 code was doing the same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET / MIPI_SEQ_DEASSERT_RESET. Looking at the naming of the sequences that is the right thing to do, but the problem is, that the old mainline code and the ADF code was actually calling the right sequence (tested on a cube iwork8 air tablet), and the swapping of the calling breaks things. This breakage was likely not noticed in testing because on cherrytrail, currently chv_exec_gpio ends up disabling the gpio pins rather then setting them (this is fixed in the next patch in this patch-set). This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's places in the enum defining them, so that their (new) names match their actual use. Changes in v2: -Add a comment to the enum explaining that the assert/reassert names are swapped in the spec Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-12-02 23:01:28 +08:00
[MIPI_SEQ_DEASSERT_RESET] = "MIPI_SEQ_DEASSERT_RESET",
[MIPI_SEQ_INIT_OTP] = "MIPI_SEQ_INIT_OTP",
[MIPI_SEQ_DISPLAY_ON] = "MIPI_SEQ_DISPLAY_ON",
[MIPI_SEQ_DISPLAY_OFF] = "MIPI_SEQ_DISPLAY_OFF",
drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET Looking at the ADF code from the Android kernel sources for a cherrytrail tablet I noticed that it is calling the MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook. Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences in panel prepare/unprepare hooks") the mainline i915 code was doing the same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET / MIPI_SEQ_DEASSERT_RESET. Looking at the naming of the sequences that is the right thing to do, but the problem is, that the old mainline code and the ADF code was actually calling the right sequence (tested on a cube iwork8 air tablet), and the swapping of the calling breaks things. This breakage was likely not noticed in testing because on cherrytrail, currently chv_exec_gpio ends up disabling the gpio pins rather then setting them (this is fixed in the next patch in this patch-set). This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's places in the enum defining them, so that their (new) names match their actual use. Changes in v2: -Add a comment to the enum explaining that the assert/reassert names are swapped in the spec Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-12-02 23:01:28 +08:00
[MIPI_SEQ_ASSERT_RESET] = "MIPI_SEQ_ASSERT_RESET",
[MIPI_SEQ_BACKLIGHT_ON] = "MIPI_SEQ_BACKLIGHT_ON",
[MIPI_SEQ_BACKLIGHT_OFF] = "MIPI_SEQ_BACKLIGHT_OFF",
[MIPI_SEQ_TEAR_ON] = "MIPI_SEQ_TEAR_ON",
[MIPI_SEQ_TEAR_OFF] = "MIPI_SEQ_TEAR_OFF",
[MIPI_SEQ_POWER_ON] = "MIPI_SEQ_POWER_ON",
[MIPI_SEQ_POWER_OFF] = "MIPI_SEQ_POWER_OFF",
};
static const char *sequence_name(enum mipi_seq seq_id)
{
if (seq_id < ARRAY_SIZE(seq_name) && seq_name[seq_id])
return seq_name[seq_id];
else
return "(unknown)";
}
static void intel_dsi_vbt_exec(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
const u8 *data;
fn_mipi_elem_exec mipi_elem_exec;
if (WARN_ON(seq_id >= ARRAY_SIZE(dev_priv->vbt.dsi.sequence)))
return;
data = dev_priv->vbt.dsi.sequence[seq_id];
if (!data)
return;
WARN_ON(*data != seq_id);
DRM_DEBUG_KMS("Starting MIPI sequence %d - %s\n",
seq_id, sequence_name(seq_id));
/* Skip Sequence Byte. */
data++;
/* Skip Size of Sequence. */
if (dev_priv->vbt.dsi.seq_version >= 3)
data += 4;
while (1) {
u8 operation_byte = *data++;
u8 operation_size = 0;
if (operation_byte == MIPI_SEQ_ELEM_END)
break;
if (operation_byte < ARRAY_SIZE(exec_elem))
mipi_elem_exec = exec_elem[operation_byte];
else
mipi_elem_exec = NULL;
/* Size of Operation. */
if (dev_priv->vbt.dsi.seq_version >= 3)
operation_size = *data++;
if (mipi_elem_exec) {
const u8 *next = data + operation_size;
data = mipi_elem_exec(intel_dsi, data);
/* Consistency check if we have size. */
if (operation_size && data != next) {
DRM_ERROR("Inconsistent operation size\n");
return;
}
} else if (operation_size) {
/* We have size, skip. */
DRM_DEBUG_KMS("Unsupported MIPI operation byte %u\n",
operation_byte);
data += operation_size;
} else {
/* No size, can't skip without parsing. */
DRM_ERROR("Unsupported MIPI operation byte %u\n",
operation_byte);
return;
}
}
}
void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id)
{
if (seq_id == MIPI_SEQ_POWER_ON && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
if (seq_id == MIPI_SEQ_BACKLIGHT_ON && intel_dsi->gpio_backlight)
gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 1);
intel_dsi_vbt_exec(intel_dsi, seq_id);
if (seq_id == MIPI_SEQ_POWER_OFF && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
if (seq_id == MIPI_SEQ_BACKLIGHT_OFF && intel_dsi->gpio_backlight)
gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 0);
}
void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
/* For v3 VBTs in vid-mode the delays are part of the VBT sequences */
if (is_vid_mode(intel_dsi) && dev_priv->vbt.dsi.seq_version >= 3)
return;
msleep(msec);
}
void intel_dsi_log_params(struct intel_dsi *intel_dsi)
{
DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
DRM_DEBUG_KMS("Lane count %d\n", intel_dsi->lane_count);
DRM_DEBUG_KMS("DPHY param reg 0x%x\n", intel_dsi->dphy_reg);
DRM_DEBUG_KMS("Video mode format %s\n",
intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ?
"non-burst with sync pulse" :
intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS ?
"non-burst with sync events" :
intel_dsi->video_mode_format == VIDEO_MODE_BURST ?
"burst" : "<unknown>");
DRM_DEBUG_KMS("Burst mode ratio %d\n", intel_dsi->burst_mode_ratio);
DRM_DEBUG_KMS("Reset timer %d\n", intel_dsi->rst_timer_val);
DRM_DEBUG_KMS("Eot %s\n", enableddisabled(intel_dsi->eotp_pkt));
DRM_DEBUG_KMS("Clockstop %s\n", enableddisabled(!intel_dsi->clock_stop));
DRM_DEBUG_KMS("Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_FRONT_BACK\n");
else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT)
DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_PIXEL_ALT\n");
else
DRM_DEBUG_KMS("Dual link: NONE\n");
DRM_DEBUG_KMS("Pixel Format %d\n", intel_dsi->pixel_format);
DRM_DEBUG_KMS("TLPX %d\n", intel_dsi->escape_clk_div);
DRM_DEBUG_KMS("LP RX Timeout 0x%x\n", intel_dsi->lp_rx_timeout);
DRM_DEBUG_KMS("Turnaround Timeout 0x%x\n", intel_dsi->turn_arnd_val);
DRM_DEBUG_KMS("Init Count 0x%x\n", intel_dsi->init_count);
DRM_DEBUG_KMS("HS to LP Count 0x%x\n", intel_dsi->hs_to_lp_count);
DRM_DEBUG_KMS("LP Byte Clock %d\n", intel_dsi->lp_byte_clk);
DRM_DEBUG_KMS("DBI BW Timer 0x%x\n", intel_dsi->bw_timer);
DRM_DEBUG_KMS("LP to HS Clock Count 0x%x\n", intel_dsi->clk_lp_to_hs_count);
DRM_DEBUG_KMS("HS to LP Clock Count 0x%x\n", intel_dsi->clk_hs_to_lp_count);
DRM_DEBUG_KMS("BTA %s\n",
enableddisabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA)));
}
bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
u16 burst_mode_ratio;
enum port port;
DRM_DEBUG_KMS("\n");
intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
intel_dsi->lane_count = mipi_config->lane_cnt + 1;
intel_dsi->pixel_format =
pixel_format_from_register_bits(
mipi_config->videomode_color_format << 7);
intel_dsi->dual_link = mipi_config->dual_link;
intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
intel_dsi->operation_mode = mipi_config->is_cmd_mode;
intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout;
intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
intel_dsi->init_count = mipi_config->master_init_timer;
intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
intel_dsi->video_frmt_cfg_bits =
mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
intel_dsi->bgr_enabled = mipi_config->rgb_flip;
/* Starting point, adjusted depending on dual link and burst mode */
intel_dsi->pclk = mode->clock;
/* In dual link mode each port needs half of pixel clock */
if (intel_dsi->dual_link) {
intel_dsi->pclk /= 2;
/* we can enable pixel_overlap if needed by panel. In this
* case we need to increase the pixelclock for extra pixels
*/
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
}
}
/* Burst Mode Ratio
* Target ddr frequency from VBT / non burst ddr freq
* multiply by 100 to preserve remainder
*/
if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
if (mipi_config->target_burst_mode_freq) {
u32 bitrate = intel_dsi_bitrate(intel_dsi);
/*
* Sometimes the VBT contains a slightly lower clock,
* then the bitrate we have calculated, in this case
* just replace it with the calculated bitrate.
*/
if (mipi_config->target_burst_mode_freq < bitrate &&
intel_fuzzy_clock_check(
mipi_config->target_burst_mode_freq,
bitrate))
mipi_config->target_burst_mode_freq = bitrate;
if (mipi_config->target_burst_mode_freq < bitrate) {
DRM_ERROR("Burst mode freq is less than computed\n");
return false;
}
burst_mode_ratio = DIV_ROUND_UP(
mipi_config->target_burst_mode_freq * 100,
bitrate);
intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
} else {
DRM_ERROR("Burst mode target is not set\n");
return false;
}
} else
burst_mode_ratio = 100;
intel_dsi->burst_mode_ratio = burst_mode_ratio;
/* delays in VBT are in unit of 100us, so need to convert
* here in ms
* Delay (100us) * 100 /1000 = Delay / 10 (ms) */
intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10;
intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10;
intel_dsi->panel_on_delay = pps->panel_on_delay / 10;
intel_dsi->panel_off_delay = pps->panel_off_delay / 10;
intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10;
2020-01-11 02:11:23 +08:00
intel_dsi->i2c_bus_num = -1;
/* a regular driver would get the device in probe */
for_each_dsi_port(port, intel_dsi->ports) {
mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device);
}
return true;
}
/*
* On some BYT/CHT devs some sequences are incomplete and we need to manually
* control some GPIOs. We need to add a GPIO lookup table before we get these.
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
* If the GOP did not initialize the panel (HDMI inserted) we may need to also
* change the pinmux for the SoC's PWM0 pin from GPIO to PWM.
*/
static struct gpiod_lookup_table pmic_panel_gpio_table = {
/* Intel GFX is consumer */
.dev_id = "0000:00:02.0",
.table = {
/* Panel EN/DISABLE */
GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
{ }
},
};
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
static struct gpiod_lookup_table soc_panel_gpio_table = {
.dev_id = "0000:00:02.0",
.table = {
GPIO_LOOKUP("INT33FC:01", 10, "backlight", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("INT33FC:01", 11, "panel", GPIO_ACTIVE_HIGH),
{ }
},
};
static const struct pinctrl_map soc_pwm_pinctrl_map[] = {
PIN_MAP_MUX_GROUP("0000:00:02.0", "soc_pwm0", "INT33FC:00",
"pwm0_grp", "pwm"),
};
void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
enum gpiod_flags flags = panel_is_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
bool want_backlight_gpio = false;
bool want_panel_gpio = false;
struct pinctrl *pinctrl;
int ret;
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
mipi_config->pwm_blc == PPS_BLC_PMIC) {
gpiod_add_lookup_table(&pmic_panel_gpio_table);
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
want_panel_gpio = true;
}
if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) {
gpiod_add_lookup_table(&soc_panel_gpio_table);
want_panel_gpio = true;
want_backlight_gpio = true;
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
/* Ensure PWM0 pin is muxed as PWM instead of GPIO */
ret = pinctrl_register_mappings(soc_pwm_pinctrl_map,
ARRAY_SIZE(soc_pwm_pinctrl_map));
if (ret)
DRM_ERROR("Failed to register pwm0 pinmux mapping\n");
pinctrl = devm_pinctrl_get_select(dev->dev, "soc_pwm0");
if (IS_ERR(pinctrl))
DRM_ERROR("Failed to set pinmux to PWM\n");
}
if (want_panel_gpio) {
intel_dsi->gpio_panel = gpiod_get(dev->dev, "panel", flags);
if (IS_ERR(intel_dsi->gpio_panel)) {
DRM_ERROR("Failed to own gpio for panel control\n");
intel_dsi->gpio_panel = NULL;
}
}
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
if (want_backlight_gpio) {
intel_dsi->gpio_backlight =
gpiod_get(dev->dev, "backlight", flags);
if (IS_ERR(intel_dsi->gpio_backlight)) {
DRM_ERROR("Failed to own gpio for backlight control\n");
intel_dsi->gpio_backlight = NULL;
}
}
}
void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
if (intel_dsi->gpio_panel) {
gpiod_put(intel_dsi->gpio_panel);
intel_dsi->gpio_panel = NULL;
}
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
if (intel_dsi->gpio_backlight) {
gpiod_put(intel_dsi->gpio_backlight);
intel_dsi->gpio_backlight = NULL;
}
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
mipi_config->pwm_blc == PPS_BLC_PMIC)
gpiod_remove_lookup_table(&pmic_panel_gpio_table);
drm/i915/dsi: Control panel and backlight enable GPIOs on BYT On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
2019-12-17 04:51:22 +08:00
if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) {
pinctrl_unregister_mappings(soc_pwm_pinctrl_map);
gpiod_remove_lookup_table(&soc_panel_gpio_table);
}
}