OpenCloudOS-Kernel/include/linux/rv.h

71 lines
1.6 KiB
C
Raw Normal View History

rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:40 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Runtime Verification.
*
* For futher information, see: kernel/trace/rv/rv.c.
*/
#ifndef _LINUX_RV_H
#define _LINUX_RV_H
rv/include: Add deterministic automata monitor definition via C macros In Linux terms, the runtime verification monitors are encapsulated inside the "RV monitor" abstraction. The "RV monitor" includes a set of instances of the monitor (per-cpu monitor, per-task monitor, and so on), the helper functions that glue the monitor to the system reference model, and the trace output as a reaction for event parsing and exceptions, as depicted below: Linux +----- RV Monitor ----------------------------------+ Formal Realm | | Realm +-------------------+ +----------------+ +-----------------+ | Linux kernel | | Monitor | | Reference | | Tracing | -> | Instance(s) | <- | Model | | (instrumentation) | | (verification) | | (specification) | +-------------------+ +----------------+ +-----------------+ | | | | V | | +----------+ | | | Reaction | | | +--+--+--+-+ | | | | | | | | | +-> trace output ? | +------------------------|--|----------------------+ | +----> panic ? +-------> <user-specified> Add the rv/da_monitor.h, enabling automatic code generation for the *Monitor Instance(s)* using C macros, and code to support it. The benefits of the usage of macro for monitor synthesis are 3-fold as it: - Reduces the code duplication; - Facilitates the bug fix/improvement; - Avoids the case of developers changing the core of the monitor code to manipulate the model in a (let's say) non-standard way. This initial implementation presents three different types of monitor instances: - DECLARE_DA_MON_GLOBAL(name, type) - DECLARE_DA_MON_PER_CPU(name, type) - DECLARE_DA_MON_PER_TASK(name, type) The first declares the functions for a global deterministic automata monitor, the second for monitors with per-cpu instances, and the third with per-task instances. Link: https://lkml.kernel.org/r/51b0bf425a281e226dfeba7401d2115d6091f84e.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:43 +08:00
#define MAX_DA_NAME_LEN 24
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:40 +08:00
#ifdef CONFIG_RV
rv/include: Add deterministic automata monitor definition via C macros In Linux terms, the runtime verification monitors are encapsulated inside the "RV monitor" abstraction. The "RV monitor" includes a set of instances of the monitor (per-cpu monitor, per-task monitor, and so on), the helper functions that glue the monitor to the system reference model, and the trace output as a reaction for event parsing and exceptions, as depicted below: Linux +----- RV Monitor ----------------------------------+ Formal Realm | | Realm +-------------------+ +----------------+ +-----------------+ | Linux kernel | | Monitor | | Reference | | Tracing | -> | Instance(s) | <- | Model | | (instrumentation) | | (verification) | | (specification) | +-------------------+ +----------------+ +-----------------+ | | | | V | | +----------+ | | | Reaction | | | +--+--+--+-+ | | | | | | | | | +-> trace output ? | +------------------------|--|----------------------+ | +----> panic ? +-------> <user-specified> Add the rv/da_monitor.h, enabling automatic code generation for the *Monitor Instance(s)* using C macros, and code to support it. The benefits of the usage of macro for monitor synthesis are 3-fold as it: - Reduces the code duplication; - Facilitates the bug fix/improvement; - Avoids the case of developers changing the core of the monitor code to manipulate the model in a (let's say) non-standard way. This initial implementation presents three different types of monitor instances: - DECLARE_DA_MON_GLOBAL(name, type) - DECLARE_DA_MON_PER_CPU(name, type) - DECLARE_DA_MON_PER_TASK(name, type) The first declares the functions for a global deterministic automata monitor, the second for monitors with per-cpu instances, and the third with per-task instances. Link: https://lkml.kernel.org/r/51b0bf425a281e226dfeba7401d2115d6091f84e.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:43 +08:00
/*
* Deterministic automaton per-object variables.
*/
struct da_monitor {
bool monitoring;
unsigned int curr_state;
};
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:40 +08:00
/*
* Per-task RV monitors count. Nowadays fixed in RV_PER_TASK_MONITORS.
* If we find justification for more monitors, we can think about
* adding more or developing a dynamic method. So far, none of
* these are justified.
*/
#define RV_PER_TASK_MONITORS 1
#define RV_PER_TASK_MONITOR_INIT (RV_PER_TASK_MONITORS)
/*
* Futher monitor types are expected, so make this a union.
*/
union rv_task_monitor {
rv/include: Add deterministic automata monitor definition via C macros In Linux terms, the runtime verification monitors are encapsulated inside the "RV monitor" abstraction. The "RV monitor" includes a set of instances of the monitor (per-cpu monitor, per-task monitor, and so on), the helper functions that glue the monitor to the system reference model, and the trace output as a reaction for event parsing and exceptions, as depicted below: Linux +----- RV Monitor ----------------------------------+ Formal Realm | | Realm +-------------------+ +----------------+ +-----------------+ | Linux kernel | | Monitor | | Reference | | Tracing | -> | Instance(s) | <- | Model | | (instrumentation) | | (verification) | | (specification) | +-------------------+ +----------------+ +-----------------+ | | | | V | | +----------+ | | | Reaction | | | +--+--+--+-+ | | | | | | | | | +-> trace output ? | +------------------------|--|----------------------+ | +----> panic ? +-------> <user-specified> Add the rv/da_monitor.h, enabling automatic code generation for the *Monitor Instance(s)* using C macros, and code to support it. The benefits of the usage of macro for monitor synthesis are 3-fold as it: - Reduces the code duplication; - Facilitates the bug fix/improvement; - Avoids the case of developers changing the core of the monitor code to manipulate the model in a (let's say) non-standard way. This initial implementation presents three different types of monitor instances: - DECLARE_DA_MON_GLOBAL(name, type) - DECLARE_DA_MON_PER_CPU(name, type) - DECLARE_DA_MON_PER_TASK(name, type) The first declares the functions for a global deterministic automata monitor, the second for monitors with per-cpu instances, and the third with per-task instances. Link: https://lkml.kernel.org/r/51b0bf425a281e226dfeba7401d2115d6091f84e.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:43 +08:00
struct da_monitor da_mon;
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:40 +08:00
};
rv: Add runtime reactors interface A runtime monitor can cause a reaction to the detection of an exception on the model's execution. By default, the monitors have tracing reactions, printing the monitor output via tracepoints. But other reactions can be added (on-demand) via this interface. The user interface resembles the kernel tracing interface and presents these files: "available_reactors" - Reading shows the available reactors, one per line. For example: # cat available_reactors nop panic printk "reacting_on" - It is an on/off general switch for reactors, disabling all reactions. "monitors/MONITOR/reactors" - List available reactors, with the select reaction for the given MONITOR inside []. The default one is the nop (no operation) reactor. - Writing the name of a reactor enables it to the given MONITOR. For example: # cat monitors/wip/reactors [nop] panic printk # echo panic > monitors/wip/reactors # cat monitors/wip/reactors nop [panic] printk Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:41 +08:00
#ifdef CONFIG_RV_REACTORS
struct rv_reactor {
const char *name;
const char *description;
void (*react)(char *msg);
};
#endif
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:40 +08:00
struct rv_monitor {
const char *name;
const char *description;
bool enabled;
int (*enable)(void);
void (*disable)(void);
void (*reset)(void);
rv: Add runtime reactors interface A runtime monitor can cause a reaction to the detection of an exception on the model's execution. By default, the monitors have tracing reactions, printing the monitor output via tracepoints. But other reactions can be added (on-demand) via this interface. The user interface resembles the kernel tracing interface and presents these files: "available_reactors" - Reading shows the available reactors, one per line. For example: # cat available_reactors nop panic printk "reacting_on" - It is an on/off general switch for reactors, disabling all reactions. "monitors/MONITOR/reactors" - List available reactors, with the select reaction for the given MONITOR inside []. The default one is the nop (no operation) reactor. - Writing the name of a reactor enables it to the given MONITOR. For example: # cat monitors/wip/reactors [nop] panic printk # echo panic > monitors/wip/reactors # cat monitors/wip/reactors nop [panic] printk Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:41 +08:00
#ifdef CONFIG_RV_REACTORS
void (*react)(char *msg);
#endif
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:40 +08:00
};
bool rv_monitoring_on(void);
int rv_unregister_monitor(struct rv_monitor *monitor);
int rv_register_monitor(struct rv_monitor *monitor);
int rv_get_task_monitor_slot(void);
void rv_put_task_monitor_slot(int slot);
rv: Add runtime reactors interface A runtime monitor can cause a reaction to the detection of an exception on the model's execution. By default, the monitors have tracing reactions, printing the monitor output via tracepoints. But other reactions can be added (on-demand) via this interface. The user interface resembles the kernel tracing interface and presents these files: "available_reactors" - Reading shows the available reactors, one per line. For example: # cat available_reactors nop panic printk "reacting_on" - It is an on/off general switch for reactors, disabling all reactions. "monitors/MONITOR/reactors" - List available reactors, with the select reaction for the given MONITOR inside []. The default one is the nop (no operation) reactor. - Writing the name of a reactor enables it to the given MONITOR. For example: # cat monitors/wip/reactors [nop] panic printk # echo panic > monitors/wip/reactors # cat monitors/wip/reactors nop [panic] printk Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:41 +08:00
#ifdef CONFIG_RV_REACTORS
bool rv_reacting_on(void);
int rv_unregister_reactor(struct rv_reactor *reactor);
int rv_register_reactor(struct rv_reactor *reactor);
#endif /* CONFIG_RV_REACTORS */
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 17:38:40 +08:00
#endif /* CONFIG_RV */
#endif /* _LINUX_RV_H */