OpenCloudOS-Kernel/drivers/gpu/drm/drm_client.c

544 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0 or MIT
/*
* Copyright 2018 Noralf Trønnes
*/
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-05 01:05:41 +08:00
#include <linux/iosys-map.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <drm/drm_client.h>
#include <drm/drm_debugfs.h>
#include <drm/drm_device.h>
#include <drm/drm_drv.h>
#include <drm/drm_file.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_gem.h>
#include <drm/drm_mode.h>
#include <drm/drm_print.h>
#include "drm_crtc_internal.h"
#include "drm_internal.h"
/**
* DOC: overview
*
* This library provides support for clients running in the kernel like fbdev and bootsplash.
*
* GEM drivers which provide a GEM based dumb buffer with a virtual address are supported.
*/
static int drm_client_open(struct drm_client_dev *client)
{
struct drm_device *dev = client->dev;
struct drm_file *file;
file = drm_file_alloc(dev->primary);
if (IS_ERR(file))
return PTR_ERR(file);
mutex_lock(&dev->filelist_mutex);
list_add(&file->lhead, &dev->filelist_internal);
mutex_unlock(&dev->filelist_mutex);
client->file = file;
return 0;
}
static void drm_client_close(struct drm_client_dev *client)
{
struct drm_device *dev = client->dev;
mutex_lock(&dev->filelist_mutex);
list_del(&client->file->lhead);
mutex_unlock(&dev->filelist_mutex);
drm_file_free(client->file);
}
/**
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
* drm_client_init - Initialise a DRM client
* @dev: DRM device
* @client: DRM client
* @name: Client name
* @funcs: DRM client functions (optional)
*
* This initialises the client and opens a &drm_file.
* Use drm_client_register() to complete the process.
* The caller needs to hold a reference on @dev before calling this function.
* The client is freed when the &drm_device is unregistered. See drm_client_release().
*
* Returns:
* Zero on success or negative error code on failure.
*/
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
int drm_client_init(struct drm_device *dev, struct drm_client_dev *client,
const char *name, const struct drm_client_funcs *funcs)
{
int ret;
if (!drm_core_check_feature(dev, DRIVER_MODESET) || !dev->driver->dumb_create)
return -EOPNOTSUPP;
if (funcs && !try_module_get(funcs->owner))
return -ENODEV;
client->dev = dev;
client->name = name;
client->funcs = funcs;
drm/fb-helper: Remove drm_fb_helper_crtc struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so use that directly instead and attach it as a modeset array onto drm_client_dev. drm_fb_helper will use this array to store its modesets which means it will always initialize a drm_client, but it will not register the client (callbacks) unless it's the generic fbdev emulation. Code will later be moved to drm_client, so add code there in a new file drm_client_modeset.c with MIT license to match drm_fb_helper.c. The modeset connector array size is hardcoded for the cloned case to avoid having to pass in a value from the driver. A value of 8 is chosen to err on the safe side. This means that the max connector argument for drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore, a todo entry for this is added. In pan_display_atomic() restore_fbdev_mode_force() is used instead of restore_fbdev_mode_atomic() because that one will later become internal to drm_client_modeset. Locking order: 1. drm_fb_helper->lock 2. drm_master_internal_acquire 3. drm_client_dev->modeset_mutex v6: Improve commit message (Sam Ravnborg) v3: - Use full drm_client_init/release for the modesets (Daniel Vetter) - drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter) - Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter) v2: - Add modesets array to drm_client (Daniel Vetter) - Use a new file for the modeset code (Daniel Vetter) - File has to be MIT licensed (Emmanuel Vadot) - Add copyrights from drm_fb_helper.c Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org
2019-05-31 22:01:11 +08:00
ret = drm_client_modeset_create(client);
if (ret)
goto err_put_module;
drm/fb-helper: Remove drm_fb_helper_crtc struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so use that directly instead and attach it as a modeset array onto drm_client_dev. drm_fb_helper will use this array to store its modesets which means it will always initialize a drm_client, but it will not register the client (callbacks) unless it's the generic fbdev emulation. Code will later be moved to drm_client, so add code there in a new file drm_client_modeset.c with MIT license to match drm_fb_helper.c. The modeset connector array size is hardcoded for the cloned case to avoid having to pass in a value from the driver. A value of 8 is chosen to err on the safe side. This means that the max connector argument for drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore, a todo entry for this is added. In pan_display_atomic() restore_fbdev_mode_force() is used instead of restore_fbdev_mode_atomic() because that one will later become internal to drm_client_modeset. Locking order: 1. drm_fb_helper->lock 2. drm_master_internal_acquire 3. drm_client_dev->modeset_mutex v6: Improve commit message (Sam Ravnborg) v3: - Use full drm_client_init/release for the modesets (Daniel Vetter) - drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter) - Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter) v2: - Add modesets array to drm_client (Daniel Vetter) - Use a new file for the modeset code (Daniel Vetter) - File has to be MIT licensed (Emmanuel Vadot) - Add copyrights from drm_fb_helper.c Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org
2019-05-31 22:01:11 +08:00
ret = drm_client_open(client);
if (ret)
goto err_free;
drm_dev_get(dev);
return 0;
drm/fb-helper: Remove drm_fb_helper_crtc struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so use that directly instead and attach it as a modeset array onto drm_client_dev. drm_fb_helper will use this array to store its modesets which means it will always initialize a drm_client, but it will not register the client (callbacks) unless it's the generic fbdev emulation. Code will later be moved to drm_client, so add code there in a new file drm_client_modeset.c with MIT license to match drm_fb_helper.c. The modeset connector array size is hardcoded for the cloned case to avoid having to pass in a value from the driver. A value of 8 is chosen to err on the safe side. This means that the max connector argument for drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore, a todo entry for this is added. In pan_display_atomic() restore_fbdev_mode_force() is used instead of restore_fbdev_mode_atomic() because that one will later become internal to drm_client_modeset. Locking order: 1. drm_fb_helper->lock 2. drm_master_internal_acquire 3. drm_client_dev->modeset_mutex v6: Improve commit message (Sam Ravnborg) v3: - Use full drm_client_init/release for the modesets (Daniel Vetter) - drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter) - Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter) v2: - Add modesets array to drm_client (Daniel Vetter) - Use a new file for the modeset code (Daniel Vetter) - File has to be MIT licensed (Emmanuel Vadot) - Add copyrights from drm_fb_helper.c Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org
2019-05-31 22:01:11 +08:00
err_free:
drm_client_modeset_free(client);
err_put_module:
if (funcs)
module_put(funcs->owner);
return ret;
}
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
EXPORT_SYMBOL(drm_client_init);
/**
* drm_client_register - Register client
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
* @client: DRM client
*
* Add the client to the &drm_device client list to activate its callbacks.
* @client must be initialized by a call to drm_client_init(). After
* drm_client_register() it is no longer permissible to call drm_client_release()
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
* directly (outside the unregister callback), instead cleanup will happen
* automatically on driver unload.
drm/client: Send hotplug event after registering a client Generate a hotplug event after registering a client to allow the client to configure its display. Remove the hotplug calls from the existing clients for fbdev emulation. This change fixes a concurrency bug between registering a client and receiving events from the DRM core. The bug is present in the fbdev emulation of all drivers. The fbdev emulation currently generates a hotplug event before registering the client to the device. For each new output, the DRM core sends an additional hotplug event to each registered client. If the DRM core detects first output between sending the artificial hotplug and registering the device, the output's hotplug event gets lost. If this is the first output, the fbdev console display remains dark. This has been observed with amdgpu and fbdev-generic. Fix this by adding hotplug generation directly to the client's register helper drm_client_register(). Registering the client and receiving events are serialized by struct drm_device.clientlist_mutex. So an output is either configured by the initial hotplug event, or the client has already been registered. The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done"), in which adding a client and receiving a hotplug event switched order. It was hidden, as most hardware and drivers have at least on static output configured. Other drivers didn't use the internal DRM client or still had struct drm_mode_config_funcs.output_poll_changed set. That callback handled hotplug events as well. After not setting the callback in amdgpu in commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed"), amdgpu did not show a framebuffer console if output events got lost. The bug got copy-pasted from fbdev-generic into the other fbdev emulation. Reported-by: Moritz Duge <MoritzDuge@kolahilft.de> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649 Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done") Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file") Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers") Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client") Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client") Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation") Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client") Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client") Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation") Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client") Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Moritz Duge <MoritzDuge@kolahilft.de> Tested-by: Torsten Krah <krah.tm@gmail.com> Tested-by: Paul Schyska <pschyska@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
2023-07-10 17:10:17 +08:00
*
* Registering a client generates a hotplug event that allows the client
* to set up its display from pre-existing outputs. The client must have
* initialized its state to able to handle the hotplug event successfully.
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
*/
void drm_client_register(struct drm_client_dev *client)
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
{
struct drm_device *dev = client->dev;
drm/client: Send hotplug event after registering a client Generate a hotplug event after registering a client to allow the client to configure its display. Remove the hotplug calls from the existing clients for fbdev emulation. This change fixes a concurrency bug between registering a client and receiving events from the DRM core. The bug is present in the fbdev emulation of all drivers. The fbdev emulation currently generates a hotplug event before registering the client to the device. For each new output, the DRM core sends an additional hotplug event to each registered client. If the DRM core detects first output between sending the artificial hotplug and registering the device, the output's hotplug event gets lost. If this is the first output, the fbdev console display remains dark. This has been observed with amdgpu and fbdev-generic. Fix this by adding hotplug generation directly to the client's register helper drm_client_register(). Registering the client and receiving events are serialized by struct drm_device.clientlist_mutex. So an output is either configured by the initial hotplug event, or the client has already been registered. The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done"), in which adding a client and receiving a hotplug event switched order. It was hidden, as most hardware and drivers have at least on static output configured. Other drivers didn't use the internal DRM client or still had struct drm_mode_config_funcs.output_poll_changed set. That callback handled hotplug events as well. After not setting the callback in amdgpu in commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed"), amdgpu did not show a framebuffer console if output events got lost. The bug got copy-pasted from fbdev-generic into the other fbdev emulation. Reported-by: Moritz Duge <MoritzDuge@kolahilft.de> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649 Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done") Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file") Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers") Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client") Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client") Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation") Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client") Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client") Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation") Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client") Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Moritz Duge <MoritzDuge@kolahilft.de> Tested-by: Torsten Krah <krah.tm@gmail.com> Tested-by: Paul Schyska <pschyska@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
2023-07-10 17:10:17 +08:00
int ret;
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
mutex_lock(&dev->clientlist_mutex);
list_add(&client->list, &dev->clientlist);
drm/client: Send hotplug event after registering a client Generate a hotplug event after registering a client to allow the client to configure its display. Remove the hotplug calls from the existing clients for fbdev emulation. This change fixes a concurrency bug between registering a client and receiving events from the DRM core. The bug is present in the fbdev emulation of all drivers. The fbdev emulation currently generates a hotplug event before registering the client to the device. For each new output, the DRM core sends an additional hotplug event to each registered client. If the DRM core detects first output between sending the artificial hotplug and registering the device, the output's hotplug event gets lost. If this is the first output, the fbdev console display remains dark. This has been observed with amdgpu and fbdev-generic. Fix this by adding hotplug generation directly to the client's register helper drm_client_register(). Registering the client and receiving events are serialized by struct drm_device.clientlist_mutex. So an output is either configured by the initial hotplug event, or the client has already been registered. The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done"), in which adding a client and receiving a hotplug event switched order. It was hidden, as most hardware and drivers have at least on static output configured. Other drivers didn't use the internal DRM client or still had struct drm_mode_config_funcs.output_poll_changed set. That callback handled hotplug events as well. After not setting the callback in amdgpu in commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed"), amdgpu did not show a framebuffer console if output events got lost. The bug got copy-pasted from fbdev-generic into the other fbdev emulation. Reported-by: Moritz Duge <MoritzDuge@kolahilft.de> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649 Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done") Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file") Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers") Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client") Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client") Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation") Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client") Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client") Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation") Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client") Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Moritz Duge <MoritzDuge@kolahilft.de> Tested-by: Torsten Krah <krah.tm@gmail.com> Tested-by: Paul Schyska <pschyska@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
2023-07-10 17:10:17 +08:00
if (client->funcs && client->funcs->hotplug) {
/*
* Perform an initial hotplug event to pick up the
* display configuration for the client. This step
* has to be performed *after* registering the client
* in the list of clients, or a concurrent hotplug
* event might be lost; leaving the display off.
*
* Hold the clientlist_mutex as for a regular hotplug
* event.
*/
ret = client->funcs->hotplug(client);
if (ret)
drm_dbg_kms(dev, "client hotplug ret=%d\n", ret);
}
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
mutex_unlock(&dev->clientlist_mutex);
}
EXPORT_SYMBOL(drm_client_register);
/**
* drm_client_release - Release DRM client resources
* @client: DRM client
*
drm/cma-helper: Fix crash in fbdev error path Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-10-02 03:45:36 +08:00
* Releases resources by closing the &drm_file that was opened by drm_client_init().
* It is called automatically if the &drm_client_funcs.unregister callback is _not_ set.
*
* This function should only be called from the unregister callback. An exception
* is fbdev which cannot free the buffer if userspace has open file descriptors.
*
* Note:
* Clients cannot initiate a release by themselves. This is done to keep the code simple.
* The driver has to be unloaded before the client can be unloaded.
*/
void drm_client_release(struct drm_client_dev *client)
{
struct drm_device *dev = client->dev;
drm_dbg_kms(dev, "%s\n", client->name);
drm/fb-helper: Remove drm_fb_helper_crtc struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so use that directly instead and attach it as a modeset array onto drm_client_dev. drm_fb_helper will use this array to store its modesets which means it will always initialize a drm_client, but it will not register the client (callbacks) unless it's the generic fbdev emulation. Code will later be moved to drm_client, so add code there in a new file drm_client_modeset.c with MIT license to match drm_fb_helper.c. The modeset connector array size is hardcoded for the cloned case to avoid having to pass in a value from the driver. A value of 8 is chosen to err on the safe side. This means that the max connector argument for drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore, a todo entry for this is added. In pan_display_atomic() restore_fbdev_mode_force() is used instead of restore_fbdev_mode_atomic() because that one will later become internal to drm_client_modeset. Locking order: 1. drm_fb_helper->lock 2. drm_master_internal_acquire 3. drm_client_dev->modeset_mutex v6: Improve commit message (Sam Ravnborg) v3: - Use full drm_client_init/release for the modesets (Daniel Vetter) - drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter) - Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter) v2: - Add modesets array to drm_client (Daniel Vetter) - Use a new file for the modeset code (Daniel Vetter) - File has to be MIT licensed (Emmanuel Vadot) - Add copyrights from drm_fb_helper.c Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org
2019-05-31 22:01:11 +08:00
drm_client_modeset_free(client);
drm_client_close(client);
drm_dev_put(dev);
if (client->funcs)
module_put(client->funcs->owner);
}
EXPORT_SYMBOL(drm_client_release);
void drm_client_dev_unregister(struct drm_device *dev)
{
struct drm_client_dev *client, *tmp;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return;
mutex_lock(&dev->clientlist_mutex);
list_for_each_entry_safe(client, tmp, &dev->clientlist, list) {
list_del(&client->list);
if (client->funcs && client->funcs->unregister) {
client->funcs->unregister(client);
} else {
drm_client_release(client);
kfree(client);
}
}
mutex_unlock(&dev->clientlist_mutex);
}
/**
* drm_client_dev_hotplug - Send hotplug event to clients
* @dev: DRM device
*
* This function calls the &drm_client_funcs.hotplug callback on the attached clients.
*
* drm_kms_helper_hotplug_event() calls this function, so drivers that use it
* don't need to call this function themselves.
*/
void drm_client_dev_hotplug(struct drm_device *dev)
{
struct drm_client_dev *client;
int ret;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return;
if (!dev->mode_config.num_connector) {
drm_dbg_kms(dev, "No connectors found, will not send hotplug events!\n");
return;
}
mutex_lock(&dev->clientlist_mutex);
list_for_each_entry(client, &dev->clientlist, list) {
if (!client->funcs || !client->funcs->hotplug)
continue;
if (client->hotplug_failed)
continue;
ret = client->funcs->hotplug(client);
drm_dbg_kms(dev, "%s: ret=%d\n", client->name, ret);
if (ret)
client->hotplug_failed = true;
}
mutex_unlock(&dev->clientlist_mutex);
}
EXPORT_SYMBOL(drm_client_dev_hotplug);
void drm_client_dev_restore(struct drm_device *dev)
{
struct drm_client_dev *client;
int ret;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return;
mutex_lock(&dev->clientlist_mutex);
list_for_each_entry(client, &dev->clientlist, list) {
if (!client->funcs || !client->funcs->restore)
continue;
ret = client->funcs->restore(client);
drm_dbg_kms(dev, "%s: ret=%d\n", client->name, ret);
if (!ret) /* The first one to return zero gets the privilege to restore */
break;
}
mutex_unlock(&dev->clientlist_mutex);
}
static void drm_client_buffer_delete(struct drm_client_buffer *buffer)
{
if (buffer->gem) {
drm_gem_vunmap_unlocked(buffer->gem, &buffer->map);
drm_gem_object_put(buffer->gem);
}
kfree(buffer);
}
static struct drm_client_buffer *
drm_client_buffer_create(struct drm_client_dev *client, u32 width, u32 height,
u32 format, u32 *handle)
{
const struct drm_format_info *info = drm_format_info(format);
struct drm_mode_create_dumb dumb_args = { };
struct drm_device *dev = client->dev;
struct drm_client_buffer *buffer;
struct drm_gem_object *obj;
int ret;
buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
if (!buffer)
return ERR_PTR(-ENOMEM);
buffer->client = client;
dumb_args.width = width;
dumb_args.height = height;
dumb_args.bpp = drm_format_info_bpp(info, 0);
ret = drm_mode_create_dumb(dev, &dumb_args, client->file);
if (ret)
goto err_delete;
obj = drm_gem_object_lookup(client->file, dumb_args.handle);
if (!obj) {
ret = -ENOENT;
goto err_delete;
}
buffer->pitch = dumb_args.pitch;
buffer->gem = obj;
*handle = dumb_args.handle;
return buffer;
err_delete:
drm_client_buffer_delete(buffer);
return ERR_PTR(ret);
}
/**
* drm_client_buffer_vmap - Map DRM client buffer into address space
* @buffer: DRM client buffer
* @map_copy: Returns the mapped memory's address
*
* This function maps a client buffer into kernel address space. If the
* buffer is already mapped, it returns the existing mapping's address.
*
* Client buffer mappings are not ref'counted. Each call to
* drm_client_buffer_vmap() should be followed by a call to
* drm_client_buffer_vunmap(); or the client buffer should be mapped
* throughout its lifetime.
*
* The returned address is a copy of the internal value. In contrast to
* other vmap interfaces, you don't need it for the client's vunmap
* function. So you can modify it at will during blit and draw operations.
*
* Returns:
* 0 on success, or a negative errno code otherwise.
*/
int
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-05 01:05:41 +08:00
drm_client_buffer_vmap(struct drm_client_buffer *buffer,
struct iosys_map *map_copy)
{
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-05 01:05:41 +08:00
struct iosys_map *map = &buffer->map;
int ret;
/*
* FIXME: The dependency on GEM here isn't required, we could
* convert the driver handle to a dma-buf instead and use the
* backend-agnostic dma-buf vmap support instead. This would
* require that the handle2fd prime ioctl is reworked to pull the
* fd_install step out of the driver backend hooks, to make that
* final step optional for internal users.
*/
ret = drm_gem_vmap_unlocked(buffer->gem, map);
if (ret)
return ret;
*map_copy = *map;
return 0;
}
EXPORT_SYMBOL(drm_client_buffer_vmap);
/**
* drm_client_buffer_vunmap - Unmap DRM client buffer
* @buffer: DRM client buffer
*
* This function removes a client buffer's memory mapping. Calling this
* function is only required by clients that manage their buffer mappings
* by themselves.
*/
void drm_client_buffer_vunmap(struct drm_client_buffer *buffer)
{
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-05 01:05:41 +08:00
struct iosys_map *map = &buffer->map;
drm_gem_vunmap_unlocked(buffer->gem, map);
}
EXPORT_SYMBOL(drm_client_buffer_vunmap);
static void drm_client_buffer_rmfb(struct drm_client_buffer *buffer)
{
int ret;
if (!buffer->fb)
return;
ret = drm_mode_rmfb(buffer->client->dev, buffer->fb->base.id, buffer->client->file);
if (ret)
drm_err(buffer->client->dev,
"Error removing FB:%u (%d)\n", buffer->fb->base.id, ret);
buffer->fb = NULL;
}
static int drm_client_buffer_addfb(struct drm_client_buffer *buffer,
u32 width, u32 height, u32 format,
u32 handle)
{
struct drm_client_dev *client = buffer->client;
struct drm_mode_fb_cmd fb_req = { };
const struct drm_format_info *info;
int ret;
info = drm_format_info(format);
fb_req.bpp = drm_format_info_bpp(info, 0);
fb_req.depth = info->depth;
fb_req.width = width;
fb_req.height = height;
fb_req.handle = handle;
fb_req.pitch = buffer->pitch;
ret = drm_mode_addfb(client->dev, &fb_req, client->file);
if (ret)
return ret;
buffer->fb = drm_framebuffer_lookup(client->dev, buffer->client->file, fb_req.fb_id);
if (WARN_ON(!buffer->fb))
return -ENOENT;
/* drop the reference we picked up in framebuffer lookup */
drm_framebuffer_put(buffer->fb);
strscpy(buffer->fb->comm, client->name, TASK_COMM_LEN);
return 0;
}
/**
* drm_client_framebuffer_create - Create a client framebuffer
* @client: DRM client
* @width: Framebuffer width
* @height: Framebuffer height
* @format: Buffer format
*
* This function creates a &drm_client_buffer which consists of a
* &drm_framebuffer backed by a dumb buffer.
* Call drm_client_framebuffer_delete() to free the buffer.
*
* Returns:
* Pointer to a client buffer or an error pointer on failure.
*/
struct drm_client_buffer *
drm_client_framebuffer_create(struct drm_client_dev *client, u32 width, u32 height, u32 format)
{
struct drm_client_buffer *buffer;
u32 handle;
int ret;
buffer = drm_client_buffer_create(client, width, height, format,
&handle);
if (IS_ERR(buffer))
return buffer;
ret = drm_client_buffer_addfb(buffer, width, height, format, handle);
/*
* The handle is only needed for creating the framebuffer, destroy it
* again to solve a circular dependency should anybody export the GEM
* object as DMA-buf. The framebuffer and our buffer structure are still
* holding references to the GEM object to prevent its destruction.
*/
drm_mode_destroy_dumb(client->dev, handle, client->file);
if (ret) {
drm_client_buffer_delete(buffer);
return ERR_PTR(ret);
}
return buffer;
}
EXPORT_SYMBOL(drm_client_framebuffer_create);
/**
* drm_client_framebuffer_delete - Delete a client framebuffer
* @buffer: DRM client buffer (can be NULL)
*/
void drm_client_framebuffer_delete(struct drm_client_buffer *buffer)
{
if (!buffer)
return;
drm_client_buffer_rmfb(buffer);
drm_client_buffer_delete(buffer);
}
EXPORT_SYMBOL(drm_client_framebuffer_delete);
/**
* drm_client_framebuffer_flush - Manually flush client framebuffer
* @buffer: DRM client buffer (can be NULL)
* @rect: Damage rectangle (if NULL flushes all)
*
* This calls &drm_framebuffer_funcs->dirty (if present) to flush buffer changes
* for drivers that need it.
*
* Returns:
* Zero on success or negative error code on failure.
*/
int drm_client_framebuffer_flush(struct drm_client_buffer *buffer, struct drm_rect *rect)
{
if (!buffer || !buffer->fb || !buffer->fb->funcs->dirty)
return 0;
if (rect) {
struct drm_clip_rect clip = {
.x1 = rect->x1,
.y1 = rect->y1,
.x2 = rect->x2,
.y2 = rect->y2,
};
return buffer->fb->funcs->dirty(buffer->fb, buffer->client->file,
0, 0, &clip, 1);
}
return buffer->fb->funcs->dirty(buffer->fb, buffer->client->file,
0, 0, NULL, 0);
}
EXPORT_SYMBOL(drm_client_framebuffer_flush);
#ifdef CONFIG_DEBUG_FS
static int drm_client_debugfs_internal_clients(struct seq_file *m, void *data)
{
struct drm_debugfs_entry *entry = m->private;
struct drm_device *dev = entry->dev;
struct drm_printer p = drm_seq_file_printer(m);
struct drm_client_dev *client;
mutex_lock(&dev->clientlist_mutex);
list_for_each_entry(client, &dev->clientlist, list)
drm_printf(&p, "%s\n", client->name);
mutex_unlock(&dev->clientlist_mutex);
return 0;
}
static const struct drm_debugfs_info drm_client_debugfs_list[] = {
{ "internal_clients", drm_client_debugfs_internal_clients, 0 },
};
void drm_client_debugfs_init(struct drm_minor *minor)
{
drm_debugfs_add_files(minor->dev, drm_client_debugfs_list,
ARRAY_SIZE(drm_client_debugfs_list));
}
#endif