UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/meson/Kconfig

110 lines
2.7 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 20:07:45 +08:00
# SPDX-License-Identifier: GPL-2.0-only
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
config COMMON_CLK_MESON_REGMAP
tristate
select REGMAP
clk: meson: add triple phase clock driver Add a driver to control the output of the sample clock generator found in the axg audio clock controller. The goal of this driver is to coherently control the phase provided to the different element using the sample clock generator. This simplify the usage of the sample clock generator a lot, without comprising the ability of the SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-23 00:34:54 +08:00
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
config COMMON_CLK_MESON_DUALDIV
tristate
select COMMON_CLK_MESON_REGMAP
clk: meson: aoclk: refactor common code into dedicated file We try to refactor the common code into one dedicated file, while preparing to add new Meson-AXG aoclk driver, this would help us to better share the code by all aoclk drivers. Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-03 21:26:20 +08:00
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
config COMMON_CLK_MESON_MPLL
tristate
select COMMON_CLK_MESON_REGMAP
config COMMON_CLK_MESON_PHASE
tristate
select COMMON_CLK_MESON_REGMAP
config COMMON_CLK_MESON_PLL
tristate
select COMMON_CLK_MESON_REGMAP
config COMMON_CLK_MESON_SCLK_DIV
tristate
select COMMON_CLK_MESON_REGMAP
config COMMON_CLK_MESON_VID_PLL_DIV
tristate
select COMMON_CLK_MESON_REGMAP
config COMMON_CLK_MESON_AO_CLKC
tristate
select COMMON_CLK_MESON_REGMAP
select RESET_CONTROLLER
clk: meson: add regmap clocks Meson clock controllers need to move the classical iomem registers to regmap. This is triggered because the HHI controllers found on the GXBB and GXL host more than just clocks. To properly handle this, we would like to migrate HHI to syscon. Also GXBB AO clock controller already use regmap, AXG AO and Audio clock controllers will as well. The purpose of this change is to provide a common structure to these meson controllers (and possibly others) for regmap based clocks. This change provides the basic gate, mux and divider, based on the helpers provided by the related generic clocks Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:32 +08:00
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
config COMMON_CLK_MESON_EE_CLKC
tristate
select COMMON_CLK_MESON_REGMAP
clk: meson: add g12a cpu dynamic divider driver Add a clock driver for the cpu dynamic divider, this divider needs to have a flag set before setting the divider value then removed while writing the new value to the register. This drivers implements this behavior and will be used essentially on the Amlogic G12A and G12B SoCs for cpu clock trees. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-31 16:40:17 +08:00
config COMMON_CLK_MESON_CPU_DYNDIV
tristate
select COMMON_CLK_MESON_REGMAP
clk: meson: only build selected platforms Break the AmLogic clock code up so that only the necessary parts are compiled and linked. The core code is selected by both arm and arm64 builds with COMMON_CLK_AMLOGIC. The individual drivers have their own config options as well. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 05:29:13 +08:00
config COMMON_CLK_MESON8B
bool
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
depends on ARCH_MESON
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
select MFD_SYSCON
clk: meson: meson8b: register the built-in reset controller The clock controller also includes some reset lines. This patch implements a reset controller to assert and de-assert these resets. The reset controller itself is registered early (through CLK_OF_DECLARE_DRIVER) because it is needed very early in the boot process (to start the secondary CPU cores). According to the public S805 datasheet there are two more reset bits in the HHI_SYS_CPU_CLK_CNTL0 register, which are not implemented by this patch (as these seem to be unused in Amlogic's vendor Linux kernel sources and their u-boot tree): - bit 15: GEN_DIV_SOFT_RESET - bit 14: SOFT_RESET All information was taken from the public S805 Datasheet and Amlogic's vendor GPL kernel sources. This patch is based on an earlier version submitted by Carlo Caione. Suggested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-07-29 05:13:12 +08:00
select RESET_CONTROLLER
clk: meson: only build selected platforms Break the AmLogic clock code up so that only the necessary parts are compiled and linked. The core code is selected by both arm and arm64 builds with COMMON_CLK_AMLOGIC. The individual drivers have their own config options as well. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 05:29:13 +08:00
help
clk: meson: meson8b: add compatibles for Meson8 and Meson8m2 The clock controller on Meson8, Meson8b and Meson8m2 is very similar based on the code from the Amlogic GPL kernel sources. Add separate compatibles for each SoC to make sure that we can easily implement all the small differences for each SoC later on. In general the Meson8 and Meson8m2 seem to be almost identical as they even share the same mach-meson8 directory in Amlogic's GPL kernel sources. The main clocks on Meson8, Meson8b and Meson8m2 are very similar, because they are all using the same PLL values, 90% of the clock gates are the same (the actual diffstat of the mach-meson8/clock.c and mach-meson8b/clock.c files is around 30 to 40 lines, when excluding all commented out code). The difference between the Meson8 and Meson8b clock gates seem to be: - Meson8 has AIU_PCLK, HDMI_RX, VCLK2_ENCT, VCLK2_ENCL, UART3, CSI_DIG_CLKIN gates which don't seem to be available on Meson8b - the gate on Meson8 for bit 7 seems to be named "_1200XXX" instead of "PERIPHS_TOP" (on Meson8b) - Meson8b has a SANA gate which doesn't seem to exist on Meson8 (or on Meson8 the same bit is used by the UART3 gate in Amlogic's GPL kernel sources) None of these gates is added for now, since it's unclear whether these definitions are actually correct (the VCLK2_ENCT gate for example is defined, but only used in some commented block). The main difference between all three SoCs seem to be the video (VPU) clocks. Apart from different supported clock rates (according to vpu.c in mach-meson8 and mach-meson8b from Amlogic's GPL kernel sources) the most notable difference is that Meson8m2 has a GP_PLL clock and a mux (probably the same as on the Meson GX SoCs) to support glitch-free (clock rate) switching. None of these VPU clocks are not supported by our mainline meson8b clock driver yet though. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-06-05 02:33:39 +08:00
Support for the clock controller on AmLogic S802 (Meson8),
S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you
want peripherals and CPU frequency scaling to work.
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
config COMMON_CLK_GXBB
bool
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
depends on ARCH_MESON
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_DUALDIV
select COMMON_CLK_MESON_VID_PLL_DIV
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
select COMMON_CLK_MESON_AO_CLKC
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
select COMMON_CLK_MESON_EE_CLKC
clk: meson: use hhi syscon if available On gxbb and axg, try to get the hhi regmap from the parent DT node, which should be the HHI system controller once the necessary changes have been made in amlogic's DTs Until then, if getting regmap through the system controller fails, the clock controller will fall back to the old way, requesting memory region directly and then registering the regmap itself. This should allow a smooth transition to syscon Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:46 +08:00
select MFD_SYSCON
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
config COMMON_CLK_AXG
bool
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
depends on ARCH_MESON
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_DUALDIV
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
select COMMON_CLK_MESON_AO_CLKC
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
select COMMON_CLK_MESON_EE_CLKC
clk: meson: use hhi syscon if available On gxbb and axg, try to get the hhi regmap from the parent DT node, which should be the HHI system controller once the necessary changes have been made in amlogic's DTs Until then, if getting regmap through the system controller fails, the clock controller will fall back to the old way, requesting memory region directly and then registering the regmap itself. This should allow a smooth transition to syscon Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:46 +08:00
select MFD_SYSCON
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
help
Support for the clock controller on AmLogic A113D devices, aka axg.
Say Y if you want peripherals and CPU frequency scaling to work.
clk: meson: axg: add the audio clock controller driver The axg audio clock controller is the clock generation unit for the amlogic audio subsystem of A113 based SoCs. It may be clocked by 8 different plls provided by the primary clock controller and also by 10 slave bit clocks and 10 slave sample clocks which may be provided by external components, such as audio codecs, through the SoC pads. It contains several muxes, dividers and gates which are fed into the the different devices of the audio subsystem. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-23 00:34:57 +08:00
config COMMON_CLK_AXG_AUDIO
tristate "Meson AXG Audio Clock Controller Driver"
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
depends on ARCH_MESON
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_PHASE
select COMMON_CLK_MESON_SCLK_DIV
clk: meson: axg-audio does not require syscon The axg audio clock controller uses regmap mmio, not syscon. Fixes: 1cd50181750f ("clk: meson: axg: add the audio clock controller driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-4-jbrunet@baylibre.com
2019-02-01 20:58:40 +08:00
select REGMAP_MMIO
clk: meson: axg: add the audio clock controller driver The axg audio clock controller is the clock generation unit for the amlogic audio subsystem of A113 based SoCs. It may be clocked by 8 different plls provided by the primary clock controller and also by 10 slave bit clocks and 10 slave sample clocks which may be provided by external components, such as audio codecs, through the SoC pads. It contains several muxes, dividers and gates which are fed into the the different devices of the audio subsystem. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-23 00:34:57 +08:00
help
Support for the audio clock controller on AmLogic A113D devices,
aka axg, Say Y if you want audio subsystem to work.
clk: meson: g12a: add peripheral clock controller Add the peripheral clock controller found in the g12a SoC family Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-4-jbrunet@baylibre.com
2019-02-01 22:53:44 +08:00
config COMMON_CLK_G12A
bool
depends on ARCH_MESON
select COMMON_CLK_MESON_REGMAP
clk: meson: Add G12A AO Clock + Reset Controller Add the Amlogic G12A AO Clock and Reset controller driver handling generation of Always-On clocks : - AO Clocks and Reset for Always-On modules - 32K Generation for USB and CEC - SAR ADC controller clock Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190212162859.20743-3-narmstrong@baylibre.com
2019-02-13 00:28:59 +08:00
select COMMON_CLK_MESON_DUALDIV
clk: meson: g12a: add peripheral clock controller Add the peripheral clock controller found in the g12a SoC family Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-4-jbrunet@baylibre.com
2019-02-01 22:53:44 +08:00
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
clk: meson: Add G12A AO Clock + Reset Controller Add the Amlogic G12A AO Clock and Reset controller driver handling generation of Always-On clocks : - AO Clocks and Reset for Always-On modules - 32K Generation for USB and CEC - SAR ADC controller clock Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190212162859.20743-3-narmstrong@baylibre.com
2019-02-13 00:28:59 +08:00
select COMMON_CLK_MESON_AO_CLKC
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
select COMMON_CLK_MESON_EE_CLKC
clk: meson: add g12a cpu dynamic divider driver Add a clock driver for the cpu dynamic divider, this divider needs to have a flag set before setting the divider value then removed while writing the new value to the register. This drivers implements this behavior and will be used essentially on the Amlogic G12A and G12B SoCs for cpu clock trees. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-31 16:40:17 +08:00
select COMMON_CLK_MESON_CPU_DYNDIV
clk: meson: g12a: add peripheral clock controller Add the peripheral clock controller found in the g12a SoC family Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-4-jbrunet@baylibre.com
2019-02-01 22:53:44 +08:00
select MFD_SYSCON
help
Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
devices, aka g12a. Say Y if you want peripherals to work.