OpenCloudOS-Kernel/sound/usb/caiaq/device.c

572 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* caiaq.c: ALSA driver for caiaq/NativeInstruments devices
*
* Copyright (c) 2007 Daniel Mack <daniel@caiaq.de>
* Karsten Wiese <fzu@wemgehoertderstaat.de>
*/
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/usb.h>
#include <sound/initval.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include "device.h"
#include "audio.h"
#include "midi.h"
#include "control.h"
#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
MODULE_DESCRIPTION("caiaq USB audio");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments,RigKontrol2},"
"{Native Instruments,RigKontrol3},"
"{Native Instruments,Kore Controller},"
"{Native Instruments,Kore Controller 2},"
"{Native Instruments,Audio Kontrol 1},"
"{Native Instruments,Audio 2 DJ},"
"{Native Instruments,Audio 4 DJ},"
"{Native Instruments,Audio 8 DJ},"
"{Native Instruments,Traktor Audio 2},"
"{Native Instruments,Session I/O},"
"{Native Instruments,GuitarRig mobile},"
"{Native Instruments,Traktor Kontrol X1},"
"{Native Instruments,Traktor Kontrol S4},"
"{Native Instruments,Maschine Controller}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the caiaq sound device");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for the caiaq soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable the caiaq soundcard.");
enum {
SAMPLERATE_44100 = 0,
SAMPLERATE_48000 = 1,
SAMPLERATE_96000 = 2,
SAMPLERATE_192000 = 3,
SAMPLERATE_88200 = 4,
SAMPLERATE_INVALID = 0xff
};
enum {
DEPTH_NONE = 0,
DEPTH_16 = 1,
DEPTH_24 = 2,
DEPTH_32 = 3
};
static const struct usb_device_id snd_usb_id_table[] = {
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_RIGKONTROL2
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_RIGKONTROL3
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_KORECONTROLLER
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_KORECONTROLLER2
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_AK1
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_AUDIO8DJ
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_SESSIONIO
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_GUITARRIGMOBILE
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_AUDIO4DJ
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_AUDIO2DJ
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_TRAKTORKONTROLX1
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_TRAKTORKONTROLS4
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_TRAKTORAUDIO2
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_MASCHINECONTROLLER
},
{ /* terminator */ }
};
static void usb_ep1_command_reply_dispatch (struct urb* urb)
{
int ret;
struct device *dev = &urb->dev->dev;
struct snd_usb_caiaqdev *cdev = urb->context;
unsigned char *buf = urb->transfer_buffer;
if (urb->status || !cdev) {
dev_warn(dev, "received EP1 urb->status = %i\n", urb->status);
return;
}
switch(buf[0]) {
case EP1_CMD_GET_DEVICE_INFO:
memcpy(&cdev->spec, buf+1, sizeof(struct caiaq_device_spec));
cdev->spec.fw_version = le16_to_cpu(cdev->spec.fw_version);
dev_dbg(dev, "device spec (firmware %d): audio: %d in, %d out, "
"MIDI: %d in, %d out, data alignment %d\n",
cdev->spec.fw_version,
cdev->spec.num_analog_audio_in,
cdev->spec.num_analog_audio_out,
cdev->spec.num_midi_in,
cdev->spec.num_midi_out,
cdev->spec.data_alignment);
cdev->spec_received++;
wake_up(&cdev->ep1_wait_queue);
break;
case EP1_CMD_AUDIO_PARAMS:
cdev->audio_parm_answer = buf[1];
wake_up(&cdev->ep1_wait_queue);
break;
case EP1_CMD_MIDI_READ:
snd_usb_caiaq_midi_handle_input(cdev, buf[1], buf + 3, buf[2]);
break;
case EP1_CMD_READ_IO:
if (cdev->chip.usb_id ==
USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) {
if (urb->actual_length > sizeof(cdev->control_state))
urb->actual_length = sizeof(cdev->control_state);
memcpy(cdev->control_state, buf + 1, urb->actual_length);
wake_up(&cdev->ep1_wait_queue);
break;
}
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
/* fall through */
case EP1_CMD_READ_ERP:
case EP1_CMD_READ_ANALOG:
snd_usb_caiaq_input_dispatch(cdev, buf, urb->actual_length);
#endif
break;
}
cdev->ep1_in_urb.actual_length = 0;
ret = usb_submit_urb(&cdev->ep1_in_urb, GFP_ATOMIC);
if (ret < 0)
dev_err(dev, "unable to submit urb. OOM!?\n");
}
int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *cdev,
unsigned char command,
const unsigned char *buffer,
int len)
{
int actual_len;
struct usb_device *usb_dev = cdev->chip.dev;
if (!usb_dev)
return -EIO;
if (len > EP1_BUFSIZE - 1)
len = EP1_BUFSIZE - 1;
if (buffer && len > 0)
memcpy(cdev->ep1_out_buf+1, buffer, len);
cdev->ep1_out_buf[0] = command;
return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
cdev->ep1_out_buf, len+1, &actual_len, 200);
}
int snd_usb_caiaq_send_command_bank(struct snd_usb_caiaqdev *cdev,
unsigned char command,
unsigned char bank,
const unsigned char *buffer,
int len)
{
int actual_len;
struct usb_device *usb_dev = cdev->chip.dev;
if (!usb_dev)
return -EIO;
if (len > EP1_BUFSIZE - 2)
len = EP1_BUFSIZE - 2;
if (buffer && len > 0)
memcpy(cdev->ep1_out_buf+2, buffer, len);
cdev->ep1_out_buf[0] = command;
cdev->ep1_out_buf[1] = bank;
return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
cdev->ep1_out_buf, len+2, &actual_len, 200);
}
int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *cdev,
int rate, int depth, int bpp)
{
int ret;
char tmp[5];
struct device *dev = caiaqdev_to_dev(cdev);
switch (rate) {
case 44100: tmp[0] = SAMPLERATE_44100; break;
case 48000: tmp[0] = SAMPLERATE_48000; break;
case 88200: tmp[0] = SAMPLERATE_88200; break;
case 96000: tmp[0] = SAMPLERATE_96000; break;
case 192000: tmp[0] = SAMPLERATE_192000; break;
default: return -EINVAL;
}
switch (depth) {
case 16: tmp[1] = DEPTH_16; break;
case 24: tmp[1] = DEPTH_24; break;
default: return -EINVAL;
}
tmp[2] = bpp & 0xff;
tmp[3] = bpp >> 8;
tmp[4] = 1; /* packets per microframe */
dev_dbg(dev, "setting audio params: %d Hz, %d bits, %d bpp\n",
rate, depth, bpp);
cdev->audio_parm_answer = -1;
ret = snd_usb_caiaq_send_command(cdev, EP1_CMD_AUDIO_PARAMS,
tmp, sizeof(tmp));
if (ret)
return ret;
if (!wait_event_timeout(cdev->ep1_wait_queue,
cdev->audio_parm_answer >= 0, HZ))
return -EPIPE;
if (cdev->audio_parm_answer != 1)
dev_dbg(dev, "unable to set the device's audio params\n");
else
cdev->bpp = bpp;
return cdev->audio_parm_answer == 1 ? 0 : -EINVAL;
}
int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *cdev,
int digital, int analog, int erp)
{
char tmp[3] = { digital, analog, erp };
return snd_usb_caiaq_send_command(cdev, EP1_CMD_AUTO_MSG,
tmp, sizeof(tmp));
}
static void setup_card(struct snd_usb_caiaqdev *cdev)
{
int ret;
char val[4];
struct device *dev = caiaqdev_to_dev(cdev);
/* device-specific startup specials */
switch (cdev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
/* RigKontrol2 - display centered dash ('-') */
val[0] = 0x00;
val[1] = 0x00;
val[2] = 0x01;
snd_usb_caiaq_send_command(cdev, EP1_CMD_WRITE_IO, val, 3);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
/* RigKontrol2 - display two centered dashes ('--') */
val[0] = 0x00;
val[1] = 0x40;
val[2] = 0x40;
val[3] = 0x00;
snd_usb_caiaq_send_command(cdev, EP1_CMD_WRITE_IO, val, 4);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
/* Audio Kontrol 1 - make USB-LED stop blinking */
val[0] = 0x00;
snd_usb_caiaq_send_command(cdev, EP1_CMD_WRITE_IO, val, 1);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
/* Audio 8 DJ - trigger read of current settings */
cdev->control_state[0] = 0xff;
snd_usb_caiaq_set_auto_msg(cdev, 1, 0, 0);
snd_usb_caiaq_send_command(cdev, EP1_CMD_READ_IO, NULL, 0);
if (!wait_event_timeout(cdev->ep1_wait_queue,
cdev->control_state[0] != 0xff, HZ))
return;
/* fix up some defaults */
if ((cdev->control_state[1] != 2) ||
(cdev->control_state[2] != 3) ||
(cdev->control_state[4] != 2)) {
cdev->control_state[1] = 2;
cdev->control_state[2] = 3;
cdev->control_state[4] = 2;
snd_usb_caiaq_send_command(cdev,
EP1_CMD_WRITE_IO, cdev->control_state, 6);
}
break;
}
if (cdev->spec.num_analog_audio_out +
cdev->spec.num_analog_audio_in +
cdev->spec.num_digital_audio_out +
cdev->spec.num_digital_audio_in > 0) {
ret = snd_usb_caiaq_audio_init(cdev);
if (ret < 0)
dev_err(dev, "Unable to set up audio system (ret=%d)\n", ret);
}
if (cdev->spec.num_midi_in +
cdev->spec.num_midi_out > 0) {
ret = snd_usb_caiaq_midi_init(cdev);
if (ret < 0)
dev_err(dev, "Unable to set up MIDI system (ret=%d)\n", ret);
}
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
ret = snd_usb_caiaq_input_init(cdev);
if (ret < 0)
dev_err(dev, "Unable to set up input system (ret=%d)\n", ret);
#endif
/* finally, register the card and all its sub-instances */
ret = snd_card_register(cdev->chip.card);
if (ret < 0) {
dev_err(dev, "snd_card_register() returned %d\n", ret);
snd_card_free(cdev->chip.card);
}
ret = snd_usb_caiaq_control_init(cdev);
if (ret < 0)
dev_err(dev, "Unable to set up control system (ret=%d)\n", ret);
}
static int create_card(struct usb_device *usb_dev,
struct usb_interface *intf,
struct snd_card **cardp)
{
int devnum;
int err;
struct snd_card *card;
struct snd_usb_caiaqdev *cdev;
for (devnum = 0; devnum < SNDRV_CARDS; devnum++)
if (enable[devnum])
break;
if (devnum >= SNDRV_CARDS)
return -ENODEV;
err = snd_card_new(&intf->dev,
index[devnum], id[devnum], THIS_MODULE,
sizeof(struct snd_usb_caiaqdev), &card);
if (err < 0)
return err;
cdev = caiaqdev(card);
cdev->chip.dev = usb_dev;
cdev->chip.card = card;
cdev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct));
spin_lock_init(&cdev->spinlock);
*cardp = card;
return 0;
}
static int init_card(struct snd_usb_caiaqdev *cdev)
{
char *c, usbpath[32];
struct usb_device *usb_dev = cdev->chip.dev;
struct snd_card *card = cdev->chip.card;
struct device *dev = caiaqdev_to_dev(cdev);
int err, len;
if (usb_set_interface(usb_dev, 0, 1) != 0) {
dev_err(dev, "can't set alt interface.\n");
return -EIO;
}
usb_init_urb(&cdev->ep1_in_urb);
usb_init_urb(&cdev->midi_out_urb);
usb_fill_bulk_urb(&cdev->ep1_in_urb, usb_dev,
usb_rcvbulkpipe(usb_dev, 0x1),
cdev->ep1_in_buf, EP1_BUFSIZE,
usb_ep1_command_reply_dispatch, cdev);
usb_fill_bulk_urb(&cdev->midi_out_urb, usb_dev,
usb_sndbulkpipe(usb_dev, 0x1),
cdev->midi_out_buf, EP1_BUFSIZE,
snd_usb_caiaq_midi_output_done, cdev);
/* sanity checks of EPs before actually submitting */
if (usb_urb_ep_type_check(&cdev->ep1_in_urb) ||
usb_urb_ep_type_check(&cdev->midi_out_urb)) {
dev_err(dev, "invalid EPs\n");
return -EINVAL;
}
init_waitqueue_head(&cdev->ep1_wait_queue);
init_waitqueue_head(&cdev->prepare_wait_queue);
if (usb_submit_urb(&cdev->ep1_in_urb, GFP_KERNEL) != 0)
return -EIO;
err = snd_usb_caiaq_send_command(cdev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
if (err)
goto err_kill_urb;
if (!wait_event_timeout(cdev->ep1_wait_queue, cdev->spec_received, HZ)) {
err = -ENODEV;
goto err_kill_urb;
}
usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
cdev->vendor_name, CAIAQ_USB_STR_LEN);
usb_string(usb_dev, usb_dev->descriptor.iProduct,
cdev->product_name, CAIAQ_USB_STR_LEN);
strlcpy(card->driver, MODNAME, sizeof(card->driver));
strlcpy(card->shortname, cdev->product_name, sizeof(card->shortname));
strlcpy(card->mixername, cdev->product_name, sizeof(card->mixername));
/* if the id was not passed as module option, fill it with a shortened
* version of the product string which does not contain any
* whitespaces */
if (*card->id == '\0') {
char id[sizeof(card->id)];
memset(id, 0, sizeof(id));
for (c = card->shortname, len = 0;
*c && len < sizeof(card->id); c++)
if (*c != ' ')
id[len++] = *c;
snd_card_set_id(card, id);
}
usb_make_path(usb_dev, usbpath, sizeof(usbpath));
snprintf(card->longname, sizeof(card->longname), "%s %s (%s)",
cdev->vendor_name, cdev->product_name, usbpath);
setup_card(cdev);
return 0;
err_kill_urb:
usb_kill_urb(&cdev->ep1_in_urb);
return err;
}
static int snd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret;
struct snd_card *card = NULL;
struct usb_device *usb_dev = interface_to_usbdev(intf);
ret = create_card(usb_dev, intf, &card);
if (ret < 0)
return ret;
usb_set_intfdata(intf, card);
ret = init_card(caiaqdev(card));
if (ret < 0) {
dev_err(&usb_dev->dev, "unable to init card! (ret=%d)\n", ret);
snd_card_free(card);
return ret;
}
return 0;
}
static void snd_disconnect(struct usb_interface *intf)
{
struct snd_card *card = usb_get_intfdata(intf);
struct device *dev = intf->usb_dev;
struct snd_usb_caiaqdev *cdev;
if (!card)
return;
cdev = caiaqdev(card);
dev_dbg(dev, "%s(%p)\n", __func__, intf);
snd_card_disconnect(card);
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
snd_usb_caiaq_input_free(cdev);
#endif
snd_usb_caiaq_audio_free(cdev);
usb_kill_urb(&cdev->ep1_in_urb);
usb_kill_urb(&cdev->midi_out_urb);
snd_card_free(card);
usb_reset_device(interface_to_usbdev(intf));
}
MODULE_DEVICE_TABLE(usb, snd_usb_id_table);
static struct usb_driver snd_usb_driver = {
.name = MODNAME,
.probe = snd_probe,
.disconnect = snd_disconnect,
.id_table = snd_usb_id_table,
};
module_usb_driver(snd_usb_driver);