OpenCloudOS-Kernel/drivers/media/rc/gpio-ir-recv.c

253 lines
6.0 KiB
C
Raw Normal View History

/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <media/rc-core.h>
#include <media/gpio-ir-recv.h>
#define GPIO_IR_DRIVER_NAME "gpio-rc-recv"
#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"
struct gpio_rc_dev {
struct rc_dev *rcdev;
int gpio_nr;
bool active_low;
};
#ifdef CONFIG_OF
/*
* Translate OpenFirmware node properties into platform_data
*/
static int gpio_ir_recv_get_devtree_pdata(struct device *dev,
struct gpio_ir_recv_platform_data *pdata)
{
struct device_node *np = dev->of_node;
enum of_gpio_flags flags;
int gpio;
gpio = of_get_gpio_flags(np, 0, &flags);
if (gpio < 0) {
if (gpio != -EPROBE_DEFER)
dev_err(dev, "Failed to get gpio flags (%d)\n", gpio);
return gpio;
}
pdata->gpio_nr = gpio;
pdata->active_low = (flags & OF_GPIO_ACTIVE_LOW);
/* probe() takes care of map_name == NULL or allowed_protos == 0 */
pdata->map_name = of_get_property(np, "linux,rc-map-name", NULL);
pdata->allowed_protos = 0;
return 0;
}
static struct of_device_id gpio_ir_recv_of_match[] = {
{ .compatible = "gpio-ir-receiver", },
{ },
};
MODULE_DEVICE_TABLE(of, gpio_ir_recv_of_match);
#else /* !CONFIG_OF */
#define gpio_ir_recv_get_devtree_pdata(dev, pdata) (-ENOSYS)
#endif
static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
{
struct gpio_rc_dev *gpio_dev = dev_id;
int gval;
int rc = 0;
enum raw_event_type type = IR_SPACE;
gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
if (gval < 0)
goto err_get_value;
if (gpio_dev->active_low)
gval = !gval;
if (gval == 1)
type = IR_PULSE;
rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
if (rc < 0)
goto err_get_value;
ir_raw_event_handle(gpio_dev->rcdev);
err_get_value:
return IRQ_HANDLED;
}
static int gpio_ir_recv_probe(struct platform_device *pdev)
{
struct gpio_rc_dev *gpio_dev;
struct rc_dev *rcdev;
const struct gpio_ir_recv_platform_data *pdata =
pdev->dev.platform_data;
int rc;
if (pdev->dev.of_node) {
struct gpio_ir_recv_platform_data *dtpdata =
devm_kzalloc(&pdev->dev, sizeof(*dtpdata), GFP_KERNEL);
if (!dtpdata)
return -ENOMEM;
rc = gpio_ir_recv_get_devtree_pdata(&pdev->dev, dtpdata);
if (rc)
return rc;
pdata = dtpdata;
}
if (!pdata)
return -EINVAL;
if (pdata->gpio_nr < 0)
return -EINVAL;
gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
if (!gpio_dev)
return -ENOMEM;
rcdev = rc_allocate_device();
if (!rcdev) {
rc = -ENOMEM;
goto err_allocate_device;
}
rcdev->priv = gpio_dev;
rcdev->driver_type = RC_DRIVER_IR_RAW;
rcdev->input_name = GPIO_IR_DEVICE_NAME;
rcdev->input_phys = GPIO_IR_DEVICE_NAME "/input0";
rcdev->input_id.bustype = BUS_HOST;
rcdev->input_id.vendor = 0x0001;
rcdev->input_id.product = 0x0001;
rcdev->input_id.version = 0x0100;
rcdev->dev.parent = &pdev->dev;
rcdev->driver_name = GPIO_IR_DRIVER_NAME;
if (pdata->allowed_protos)
rcdev->allowed_protos = pdata->allowed_protos;
else
[media] rc-core: add separate defines for protocol bitmaps and numbers The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-12 06:11:54 +08:00
rcdev->allowed_protos = RC_BIT_ALL;
rcdev->map_name = pdata->map_name ?: RC_MAP_EMPTY;
gpio_dev->rcdev = rcdev;
gpio_dev->gpio_nr = pdata->gpio_nr;
gpio_dev->active_low = pdata->active_low;
rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
if (rc < 0)
goto err_gpio_request;
rc = gpio_direction_input(pdata->gpio_nr);
if (rc < 0)
goto err_gpio_direction_input;
rc = rc_register_device(rcdev);
if (rc < 0) {
dev_err(&pdev->dev, "failed to register rc device\n");
goto err_register_rc_device;
}
platform_set_drvdata(pdev, gpio_dev);
rc = request_any_context_irq(gpio_to_irq(pdata->gpio_nr),
gpio_ir_recv_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"gpio-ir-recv-irq", gpio_dev);
if (rc < 0)
goto err_request_irq;
return 0;
err_request_irq:
rc_unregister_device(rcdev);
rcdev = NULL;
err_register_rc_device:
err_gpio_direction_input:
gpio_free(pdata->gpio_nr);
err_gpio_request:
rc_free_device(rcdev);
err_allocate_device:
kfree(gpio_dev);
return rc;
}
static int gpio_ir_recv_remove(struct platform_device *pdev)
{
struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
rc_unregister_device(gpio_dev->rcdev);
gpio_free(gpio_dev->gpio_nr);
kfree(gpio_dev);
return 0;
}
#ifdef CONFIG_PM
static int gpio_ir_recv_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
if (device_may_wakeup(dev))
enable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
else
disable_irq(gpio_to_irq(gpio_dev->gpio_nr));
return 0;
}
static int gpio_ir_recv_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
if (device_may_wakeup(dev))
disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
else
enable_irq(gpio_to_irq(gpio_dev->gpio_nr));
return 0;
}
static const struct dev_pm_ops gpio_ir_recv_pm_ops = {
.suspend = gpio_ir_recv_suspend,
.resume = gpio_ir_recv_resume,
};
#endif
static struct platform_driver gpio_ir_recv_driver = {
.probe = gpio_ir_recv_probe,
.remove = gpio_ir_recv_remove,
.driver = {
.name = GPIO_IR_DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(gpio_ir_recv_of_match),
#ifdef CONFIG_PM
.pm = &gpio_ir_recv_pm_ops,
#endif
},
};
module_platform_driver(gpio_ir_recv_driver);
MODULE_DESCRIPTION("GPIO IR Receiver driver");
MODULE_LICENSE("GPL v2");