OpenCloudOS-Kernel/drivers/video/fbdev/pxa168fb.c

818 lines
20 KiB
C
Raw Normal View History

/*
* linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
*
* Copyright (C) 2008 Marvell International Ltd.
* All rights reserved.
*
* 2009-02-16 adapted from original version for PXA168/910
* Jun Nie <njun@marvell.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/uaccess.h>
#include <video/pxa168fb.h>
#include "pxa168fb.h"
#define DEFAULT_REFRESH 60 /* Hz */
static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
{
/*
* Pseudocolor mode?
*/
if (var->bits_per_pixel == 8)
return PIX_FMT_PSEUDOCOLOR;
/*
* Check for 565/1555.
*/
if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
var->green.length <= 6 && var->blue.length <= 5) {
if (var->transp.length == 0) {
if (var->red.offset >= var->blue.offset)
return PIX_FMT_RGB565;
else
return PIX_FMT_BGR565;
}
if (var->transp.length == 1 && var->green.length <= 5) {
if (var->red.offset >= var->blue.offset)
return PIX_FMT_RGB1555;
else
return PIX_FMT_BGR1555;
}
}
/*
* Check for 888/A888.
*/
if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
var->green.length <= 8 && var->blue.length <= 8) {
if (var->bits_per_pixel == 24 && var->transp.length == 0) {
if (var->red.offset >= var->blue.offset)
return PIX_FMT_RGB888PACK;
else
return PIX_FMT_BGR888PACK;
}
if (var->bits_per_pixel == 32 && var->transp.length == 8) {
if (var->red.offset >= var->blue.offset)
return PIX_FMT_RGBA888;
else
return PIX_FMT_BGRA888;
} else {
if (var->red.offset >= var->blue.offset)
return PIX_FMT_RGB888UNPACK;
else
return PIX_FMT_BGR888UNPACK;
}
}
return -EINVAL;
}
static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
{
switch (pix_fmt) {
case PIX_FMT_RGB565:
var->bits_per_pixel = 16;
var->red.offset = 11; var->red.length = 5;
var->green.offset = 5; var->green.length = 6;
var->blue.offset = 0; var->blue.length = 5;
var->transp.offset = 0; var->transp.length = 0;
break;
case PIX_FMT_BGR565:
var->bits_per_pixel = 16;
var->red.offset = 0; var->red.length = 5;
var->green.offset = 5; var->green.length = 6;
var->blue.offset = 11; var->blue.length = 5;
var->transp.offset = 0; var->transp.length = 0;
break;
case PIX_FMT_RGB1555:
var->bits_per_pixel = 16;
var->red.offset = 10; var->red.length = 5;
var->green.offset = 5; var->green.length = 5;
var->blue.offset = 0; var->blue.length = 5;
var->transp.offset = 15; var->transp.length = 1;
break;
case PIX_FMT_BGR1555:
var->bits_per_pixel = 16;
var->red.offset = 0; var->red.length = 5;
var->green.offset = 5; var->green.length = 5;
var->blue.offset = 10; var->blue.length = 5;
var->transp.offset = 15; var->transp.length = 1;
break;
case PIX_FMT_RGB888PACK:
var->bits_per_pixel = 24;
var->red.offset = 16; var->red.length = 8;
var->green.offset = 8; var->green.length = 8;
var->blue.offset = 0; var->blue.length = 8;
var->transp.offset = 0; var->transp.length = 0;
break;
case PIX_FMT_BGR888PACK:
var->bits_per_pixel = 24;
var->red.offset = 0; var->red.length = 8;
var->green.offset = 8; var->green.length = 8;
var->blue.offset = 16; var->blue.length = 8;
var->transp.offset = 0; var->transp.length = 0;
break;
case PIX_FMT_RGBA888:
var->bits_per_pixel = 32;
var->red.offset = 16; var->red.length = 8;
var->green.offset = 8; var->green.length = 8;
var->blue.offset = 0; var->blue.length = 8;
var->transp.offset = 24; var->transp.length = 8;
break;
case PIX_FMT_BGRA888:
var->bits_per_pixel = 32;
var->red.offset = 0; var->red.length = 8;
var->green.offset = 8; var->green.length = 8;
var->blue.offset = 16; var->blue.length = 8;
var->transp.offset = 24; var->transp.length = 8;
break;
case PIX_FMT_PSEUDOCOLOR:
var->bits_per_pixel = 8;
var->red.offset = 0; var->red.length = 8;
var->green.offset = 0; var->green.length = 8;
var->blue.offset = 0; var->blue.length = 8;
var->transp.offset = 0; var->transp.length = 0;
break;
}
}
static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
struct fb_videomode *mode, int pix_fmt, int ystretch)
{
struct fb_info *info = fbi->info;
set_pix_fmt(var, pix_fmt);
var->xres = mode->xres;
var->yres = mode->yres;
var->xres_virtual = max(var->xres, var->xres_virtual);
if (ystretch)
var->yres_virtual = info->fix.smem_len /
(var->xres_virtual * (var->bits_per_pixel >> 3));
else
var->yres_virtual = max(var->yres, var->yres_virtual);
var->grayscale = 0;
var->accel_flags = FB_ACCEL_NONE;
var->pixclock = mode->pixclock;
var->left_margin = mode->left_margin;
var->right_margin = mode->right_margin;
var->upper_margin = mode->upper_margin;
var->lower_margin = mode->lower_margin;
var->hsync_len = mode->hsync_len;
var->vsync_len = mode->vsync_len;
var->sync = mode->sync;
var->vmode = FB_VMODE_NONINTERLACED;
var->rotate = FB_ROTATE_UR;
}
static int pxa168fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct pxa168fb_info *fbi = info->par;
int pix_fmt;
/*
* Determine which pixel format we're going to use.
*/
pix_fmt = determine_best_pix_fmt(var);
if (pix_fmt < 0)
return pix_fmt;
set_pix_fmt(var, pix_fmt);
fbi->pix_fmt = pix_fmt;
/*
* Basic geometry sanity checks.
*/
if (var->xoffset + var->xres > var->xres_virtual)
return -EINVAL;
if (var->yoffset + var->yres > var->yres_virtual)
return -EINVAL;
if (var->xres + var->right_margin +
var->hsync_len + var->left_margin > 2048)
return -EINVAL;
if (var->yres + var->lower_margin +
var->vsync_len + var->upper_margin > 2048)
return -EINVAL;
/*
* Check size of framebuffer.
*/
if (var->xres_virtual * var->yres_virtual *
(var->bits_per_pixel >> 3) > info->fix.smem_len)
return -EINVAL;
return 0;
}
/*
* The hardware clock divider has an integer and a fractional
* stage:
*
* clk2 = clk_in / integer_divider
* clk_out = clk2 * (1 - (fractional_divider >> 12))
*
* Calculate integer and fractional divider for given clk_in
* and clk_out.
*/
static void set_clock_divider(struct pxa168fb_info *fbi,
const struct fb_videomode *m)
{
int divider_int;
int needed_pixclk;
u64 div_result;
u32 x = 0;
/*
* Notice: The field pixclock is used by linux fb
* is in pixel second. E.g. struct fb_videomode &
* struct fb_var_screeninfo
*/
/*
* Check input values.
*/
if (!m || !m->pixclock || !m->refresh) {
dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
return;
}
/*
* Using PLL/AXI clock.
*/
x = 0x80000000;
/*
* Calc divider according to refresh rate.
*/
div_result = 1000000000000ll;
do_div(div_result, m->pixclock);
needed_pixclk = (u32)div_result;
divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
/* check whether divisor is too small. */
if (divider_int < 2) {
dev_warn(fbi->dev, "Warning: clock source is too slow. "
"Try smaller resolution\n");
divider_int = 2;
}
/*
* Set setting to reg.
*/
x |= divider_int;
writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
}
static void set_dma_control0(struct pxa168fb_info *fbi)
{
u32 x;
/*
* Set bit to enable graphics DMA.
*/
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
x &= ~CFG_GRA_ENA_MASK;
x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0);
/*
* If we are in a pseudo-color mode, we need to enable
* palette lookup.
*/
if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
x |= 0x10000000;
/*
* Configure hardware pixel format.
*/
x &= ~(0xF << 16);
x |= (fbi->pix_fmt >> 1) << 16;
/*
* Check red and blue pixel swap.
* 1. source data swap
* 2. panel output data swap
*/
x &= ~(1 << 12);
x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
}
static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
{
u32 x;
/*
* Configure default bits: vsync triggers DMA, gated clock
* enable, power save enable, configure alpha registers to
* display 100% graphics, and set pixel command.
*/
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
x |= 0x2032ff81;
/*
* We trigger DMA on the falling edge of vsync if vsync is
* active low, or on the rising edge if vsync is active high.
*/
if (!(sync & FB_SYNC_VERT_HIGH_ACT))
x |= 0x08000000;
writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
}
static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
{
struct pxa168fb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
int pixel_offset;
unsigned long addr;
pixel_offset = (yoffset * var->xres_virtual) + xoffset;
addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
}
static void set_dumb_panel_control(struct fb_info *info)
{
struct pxa168fb_info *fbi = info->par;
struct pxa168fb_mach_info *mi = dev_get_platdata(fbi->dev);
u32 x;
/*
* Preserve enable flag.
*/
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
x |= mi->gpio_output_data << 20;
x |= mi->gpio_output_mask << 12;
x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
x |= mi->invert_composite_blank ? 0x00000040 : 0;
x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
x |= mi->invert_pixclock ? 0x00000002 : 0;
writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
}
static void set_dumb_screen_dimensions(struct fb_info *info)
{
struct pxa168fb_info *fbi = info->par;
struct fb_var_screeninfo *v = &info->var;
int x;
int y;
x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
}
static int pxa168fb_set_par(struct fb_info *info)
{
struct pxa168fb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
struct fb_videomode mode;
u32 x;
/*
* Set additional mode info.
*/
if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
else
info->fix.visual = FB_VISUAL_TRUECOLOR;
info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
info->fix.ypanstep = var->yres;
/*
* Disable panel output while we setup the display.
*/
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
/*
* Configure global panel parameters.
*/
writel((var->yres << 16) | var->xres,
fbi->reg_base + LCD_SPU_V_H_ACTIVE);
/*
* convet var to video mode
*/
fb_var_to_videomode(&mode, &info->var);
/* Calculate clock divisor. */
set_clock_divider(fbi, &mode);
/* Configure dma ctrl regs. */
set_dma_control0(fbi);
set_dma_control1(fbi, info->var.sync);
/*
* Configure graphics DMA parameters.
*/
x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
writel((var->yres << 16) | var->xres,
fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
writel((var->yres << 16) | var->xres,
fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
/*
* Configure dumb panel ctrl regs & timings.
*/
set_dumb_panel_control(info);
set_dumb_screen_dimensions(info);
writel((var->left_margin << 16) | var->right_margin,
fbi->reg_base + LCD_SPU_H_PORCH);
writel((var->upper_margin << 16) | var->lower_margin,
fbi->reg_base + LCD_SPU_V_PORCH);
/*
* Re-enable panel output.
*/
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
return 0;
}
static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
{
return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
}
static u32 to_rgb(u16 red, u16 green, u16 blue)
{
red >>= 8;
green >>= 8;
blue >>= 8;
return (red << 16) | (green << 8) | blue;
}
static int
pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
unsigned int blue, unsigned int trans, struct fb_info *info)
{
struct pxa168fb_info *fbi = info->par;
u32 val;
if (info->var.grayscale)
red = green = blue = (19595 * red + 38470 * green +
7471 * blue) >> 16;
if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
val = chan_to_field(red, &info->var.red);
val |= chan_to_field(green, &info->var.green);
val |= chan_to_field(blue , &info->var.blue);
fbi->pseudo_palette[regno] = val;
}
if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
val = to_rgb(red, green, blue);
writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
}
return 0;
}
static int pxa168fb_blank(int blank, struct fb_info *info)
{
struct pxa168fb_info *fbi = info->par;
fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
set_dumb_panel_control(info);
return 0;
}
static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
set_graphics_start(info, var->xoffset, var->yoffset);
return 0;
}
static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
{
struct pxa168fb_info *fbi = dev_id;
u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
fbi->reg_base + SPU_IRQ_ISR);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static const struct fb_ops pxa168fb_ops = {
.owner = THIS_MODULE,
.fb_check_var = pxa168fb_check_var,
.fb_set_par = pxa168fb_set_par,
.fb_setcolreg = pxa168fb_setcolreg,
.fb_blank = pxa168fb_blank,
.fb_pan_display = pxa168fb_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
};
static void pxa168fb_init_mode(struct fb_info *info,
struct pxa168fb_mach_info *mi)
{
struct pxa168fb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
u32 total_w, total_h, refresh;
u64 div_result;
const struct fb_videomode *m;
/*
* Set default value
*/
refresh = DEFAULT_REFRESH;
/* try to find best video mode. */
m = fb_find_best_mode(&info->var, &info->modelist);
if (m)
fb_videomode_to_var(&info->var, m);
/* Init settings. */
var->xres_virtual = var->xres;
var->yres_virtual = info->fix.smem_len /
(var->xres_virtual * (var->bits_per_pixel >> 3));
dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
var->xres, var->yres);
/* correct pixclock. */
total_w = var->xres + var->left_margin + var->right_margin +
var->hsync_len;
total_h = var->yres + var->upper_margin + var->lower_margin +
var->vsync_len;
div_result = 1000000000000ll;
do_div(div_result, total_w * total_h * refresh);
var->pixclock = (u32)div_result;
}
static int pxa168fb_probe(struct platform_device *pdev)
{
struct pxa168fb_mach_info *mi;
struct fb_info *info = 0;
struct pxa168fb_info *fbi = 0;
struct resource *res;
struct clk *clk;
int irq, ret;
mi = dev_get_platdata(&pdev->dev);
if (mi == NULL) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
}
clk = devm_clk_get(&pdev->dev, "LCDCLK");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "unable to get LCDCLK");
return PTR_ERR(clk);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no IO memory defined\n");
return -ENOENT;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no IRQ defined\n");
return -ENOENT;
}
info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
if (info == NULL) {
return -ENOMEM;
}
/* Initialize private data */
fbi = info->par;
fbi->info = info;
fbi->clk = clk;
fbi->dev = info->dev = &pdev->dev;
fbi->panel_rbswap = mi->panel_rbswap;
fbi->is_blanked = 0;
fbi->active = mi->active;
/*
* Initialise static fb parameters.
*/
info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
info->node = -1;
strlcpy(info->fix.id, mi->id, 16);
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.type_aux = 0;
info->fix.xpanstep = 0;
info->fix.ypanstep = 0;
info->fix.ywrapstep = 0;
info->fix.mmio_start = res->start;
info->fix.mmio_len = resource_size(res);
info->fix.accel = FB_ACCEL_NONE;
info->fbops = &pxa168fb_ops;
info->pseudo_palette = fbi->pseudo_palette;
/*
* Map LCD controller registers.
*/
fbi->reg_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (fbi->reg_base == NULL) {
ret = -ENOMEM;
goto failed_free_info;
}
/*
* Allocate framebuffer memory.
*/
info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc() Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-23 10:34:22 +08:00
info->screen_base = dma_alloc_wc(fbi->dev, info->fix.smem_len,
&fbi->fb_start_dma, GFP_KERNEL);
if (info->screen_base == NULL) {
ret = -ENOMEM;
goto failed_free_info;
}
info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
set_graphics_start(info, 0, 0);
/*
* Set video mode according to platform data.
*/
set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
/*
* init video mode data.
*/
pxa168fb_init_mode(info, mi);
/*
* Fill in sane defaults.
*/
ret = pxa168fb_check_var(&info->var, info);
if (ret)
goto failed_free_fbmem;
/*
* enable controller clock
*/
pxa168fb: prepare the clock Add missing prepare/unprepare operations for fbi->clk, this fixes following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0 Enabling unprepared disp0_clk Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25 Hardware name: Marvell MMP2 (Device Tree Support) [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14) [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0) [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c) [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0) [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c) [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac) [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94) [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470) [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124) [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0) [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230) [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0) [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0) [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0) [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c) [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xd008bfb0 to 0xd008bff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace c0af40f9e2ed7cb4 ]--- Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [b.zolnierkie: enhance patch description a bit] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-27 00:11:22 +08:00
clk_prepare_enable(fbi->clk);
pxa168fb_set_par(info);
/*
* Configure default register values.
*/
writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
fbi->reg_base + LCD_SPU_SRAM_PARA1);
/*
* Allocate color map.
*/
if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
ret = -ENOMEM;
goto failed_free_clk;
}
/*
* Register irq handler.
*/
ret = devm_request_irq(&pdev->dev, irq, pxa168fb_handle_irq,
IRQF_SHARED, info->fix.id, fbi);
if (ret < 0) {
dev_err(&pdev->dev, "unable to request IRQ\n");
ret = -ENXIO;
goto failed_free_cmap;
}
/*
* Enable GFX interrupt
*/
writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
/*
* Register framebuffer.
*/
ret = register_framebuffer(info);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
ret = -ENXIO;
goto failed_free_cmap;
}
platform_set_drvdata(pdev, fbi);
return 0;
failed_free_cmap:
fb_dealloc_cmap(&info->cmap);
failed_free_clk:
pxa168fb: prepare the clock Add missing prepare/unprepare operations for fbi->clk, this fixes following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0 Enabling unprepared disp0_clk Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25 Hardware name: Marvell MMP2 (Device Tree Support) [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14) [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0) [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c) [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0) [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c) [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac) [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94) [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470) [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124) [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0) [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230) [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0) [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0) [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0) [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c) [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xd008bfb0 to 0xd008bff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace c0af40f9e2ed7cb4 ]--- Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [b.zolnierkie: enhance patch description a bit] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-27 00:11:22 +08:00
clk_disable_unprepare(fbi->clk);
failed_free_fbmem:
dma_free_wc(fbi->dev, info->fix.smem_len,
info->screen_base, fbi->fb_start_dma);
failed_free_info:
framebuffer_release(info);
dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
return ret;
}
static int pxa168fb_remove(struct platform_device *pdev)
{
struct pxa168fb_info *fbi = platform_get_drvdata(pdev);
struct fb_info *info;
unsigned int data;
if (!fbi)
return 0;
/* disable DMA transfer */
data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
data &= ~CFG_GRA_ENA_MASK;
writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0);
info = fbi->info;
unregister_framebuffer(info);
writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA);
if (info->cmap.len)
fb_dealloc_cmap(&info->cmap);
dma_free_wc(fbi->dev, info->fix.smem_len,
dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc() Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-23 10:34:22 +08:00
info->screen_base, info->fix.smem_start);
pxa168fb: prepare the clock Add missing prepare/unprepare operations for fbi->clk, this fixes following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0 Enabling unprepared disp0_clk Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25 Hardware name: Marvell MMP2 (Device Tree Support) [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14) [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0) [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c) [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0) [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c) [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac) [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94) [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470) [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124) [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0) [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230) [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0) [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0) [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0) [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c) [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xd008bfb0 to 0xd008bff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace c0af40f9e2ed7cb4 ]--- Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [b.zolnierkie: enhance patch description a bit] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-09-27 00:11:22 +08:00
clk_disable_unprepare(fbi->clk);
framebuffer_release(info);
return 0;
}
static struct platform_driver pxa168fb_driver = {
.driver = {
.name = "pxa168-fb",
},
.probe = pxa168fb_probe,
.remove = pxa168fb_remove,
};
module_platform_driver(pxa168fb_driver);
MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
"Green Wan <gwan@marvell.com>");
MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
MODULE_LICENSE("GPL");