UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/configs/omap2plus_defconfig

575 lines
13 KiB
Plaintext
Raw Normal View History

arm: config: omap2plus_defconfig: switch over to LZMA compression LZMA compression makes about 33% smaller zImage with just a slight extra decompression time. Before this patch, zImage built with o2+_dc is 4.5MiB and after it's about 3.3MiB. Suggested-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-31 01:18:56 +08:00
CONFIG_KERNEL_LZMA=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_AUDIT=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
omap3: update omap3_defconfig - Update the omap3_defconfig to sync up with the generated .config - Increase CONFIG_LOG_BUF_SHIFT to 16 to allow the entire boot log to be captured (useful when using boot time tracer, for example) Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-13 13:32:27 +08:00
CONFIG_LOG_BUF_SHIFT=16
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_CGROUPS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_BLK_CGROUP=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_CGROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_NAMESPACES=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BLK_DEV_INITRD=y
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 06:44:16 +08:00
CONFIG_EXPERT=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SLAB=y
CONFIG_PROFILING=y
ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in undefined instruction traps in u-boot (and boot failures) on OMAP2xxx SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-17 02:25:07 +08:00
CONFIG_ARCH_MULTI_V6=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:39 +08:00
CONFIG_POWER_AVS_OMAP=y
CONFIG_POWER_AVS_OMAP_CLASS3=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_OMAP_RESET_CLOCKS=y
ARM: OMAP: build mach-omap code only if needed If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the individual SoCs disabled, we run into a large number of link errors because if incorrect dependencies: arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable': arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup' arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable' arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle': arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown': arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup': arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle' arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init': arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init': arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context' We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that gets enabled any time that one of the SoC versions is enabled. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-01 06:02:26 +08:00
CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SOC_OMAP5=y
ARM: OMAP: build mach-omap code only if needed If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the individual SoCs disabled, we run into a large number of link errors because if incorrect dependencies: arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable': arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup' arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable' arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle': arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown': arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup': arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle' arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init': arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init': arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context' We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that gets enabled any time that one of the SoC versions is enabled. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-01 06:02:26 +08:00
CONFIG_SOC_AM33XX=y
ARM: OMAP2+: AM43x: enable in default config Enable AM43x SoC in omap2plus_defconfig Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-07 18:21:23 +08:00
CONFIG_SOC_AM43XX=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SOC_DRA7XX=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_ARM_THUMBEE=y
omap: Update omap3_defconfig for omap2 We need to enable ARM_ERRATA_411920 for omap2 and remove the omap2 specific defconfigs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-21 05:53:38 +08:00
CONFIG_ARM_ERRATA_411920=y
omap: Update omap3_defconfig to work with SMP_ON_UP With the recent changes to core ARM kernel code, we can now boot SMP kernel on UP systems. Update omap3_defconfig to enable SMP. This allows us to remove omap_4430sdp_defconfig. In addition to enabling SMP, we also need to disable some options to make the system boot: - For some reason LOCK_STAT causes tons of WARNING: at mm/percpu-vm.c:320 pcpu_alloc+0x2fc/0x888() so disable it for now. - MUSB init fails for multi-omap, disable it for now. - LOCAL_TIMERS hangs on omap4, disable it for now. Also disable DEBUG_LL as this should be only enabled for debugging. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-21 05:53:38 +08:00
CONFIG_SMP=y
omap2plus: omap4: Set NR_CPU to 2 instead of default 4 The omap2plus_defconfig picks default NR_CPU value as 4 which isn't correct for OMAP4430. Available CPUs are ony 2, so fix the same. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-18 01:55:03 +08:00
CONFIG_NR_CPUS=2
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_SECCOMP=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support As this config must support boards which cannot support separate device trees, enable support for appended ones. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-01 21:13:13 +08:00
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
omap: Update omap2plus_defconfig to use ttyO instead ttyS With the omap-serial the device has changed from ttyS to ttyO as the system may have both omap-serial and 8250 ports. Note that systems using omap-serial need to be updated to use ttyO[012] instead of ttyS[012] in the bootloader, CONFIG_CMDLINE, /etc/inittab, and the root file system with mknod. Also you may need to add ttyO[012] to /etc/securetty. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-09 01:23:44 +08:00
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_KEXEC=y
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_CPUFREQ_DT=m
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:29:08 +08:00
CONFIG_ARM_TI_CPUFREQ=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:39 +08:00
CONFIG_CPU_IDLE=y
ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE Add CONFIG_ARM_CPUIDLE and supporting CONFIG_DT_IDLE_STATES as am335x and am437x will make use of these drivers. Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-13 11:07:55 +08:00
CONFIG_ARM_CPUIDLE=y
CONFIG_DT_IDLE_STATES=y
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:29:08 +08:00
CONFIG_KERNEL_MODE_NEON=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_PM_DEBUG=y
ARM: omap2plus_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-02-01 01:42:59 +08:00
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_GHASH_ARM_CE=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BINFMT_MISC=y
CONFIG_CMA=y
ARM: omap2plus_defconfig: Enable zram as loadable modules Enable zram as loadable modules. This allows mounting some part of memory as swap on low memory devices. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_ZSMALLOC=m
CONFIG_PGTABLE_MAPPING=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NETFILTER=y
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:48:44 +08:00
CONFIG_PHONET=m
ARM: omap2plus_defconfig: enable NET_SWITCHDEV The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig. Fixes: 3727d259ddaf ("arm: omap2plus_defconfig: enable new cpsw switchdev driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-05 01:45:33 +08:00
CONFIG_NET_SWITCHDEV=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_BT=m
ARM: omap2plus_defconfig: Update bluetooth options Many omaps have bluetooth, so let's make it available as modules. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:46:59 +08:00
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_BT_HCIUART=m
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:47:35 +08:00
CONFIG_BT_HCIUART_NOKIA=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
ARM: omap2plus_defconfig: Update bluetooth options Many omaps have bluetooth, so let's make it available as modules. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:46:59 +08:00
CONFIG_BT_HCIUART_3WIRE=y
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:47:35 +08:00
CONFIG_BT_HCIUART_BCM=y
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
ARM: omap2plus_defconfig: Update bluetooth options Many omaps have bluetooth, so let's make it available as modules. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:46:59 +08:00
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_AF_RXRPC=m
ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value Commit 648af7fca159 ("rxrpc: Absorb the rxkad security module") changed the RXKAD Kconfig symbol from tristate to boolean but the commit didn't update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module. This leads to the following warning when using the omap2plus_defconfig: arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-23 01:53:19 +08:00
CONFIG_RXKAD=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_CFG80211=m
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_MAC80211=m
ARM: omap2plus_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-02-01 01:42:59 +08:00
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
ARM: OMAP2+: enable devtmpfs and devtmpfs automount Since udev-182, udev no longer creates device nodes under /dev and this has to be managed by the kernel devtmpfs filesystem. This means that a kernel built with the current OMAP2+ config will not boot on a system with a recent udev. Also, it is good to have /dev automatically mounted since some non-initramfs based setups assumes this and don't manually mount it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Santosh Shilimkar<santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 03:30:00 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_OMAP_OCP2SCP=y
ARM: omap2plus_defconfig: Enable simple-pm-bus We can use simple-pm-bus instead of simple-bus, let's enable it to allow configuring it in dts files for using things like genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_SIMPLE_PM_BUS=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_CONNECTOR=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
ARM: omap2plus_defconfig: Add NOR flash support Some omaps have NOR flash as the rootfs but we're missing physmap and physmap_of to properly support it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-20 01:52:54 +08:00
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
ARM: omap2plus_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-02-01 01:42:59 +08:00
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 23:47:44 +08:00
CONFIG_MTD_RAW_NAND=y
mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 22:12:27 +08:00
CONFIG_MTD_NAND_ECC_SW_BCH=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MTD_NAND_OMAP2=y
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver Without this NAND doesn't work on most EVMs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-23 23:18:36 +08:00
CONFIG_MTD_NAND_OMAP_BCH=y
ARM: omap2plus_defconfig: enable support for M25P80 SPI NOR M25P80 driver provides support for most common SPI NOR devices. These devices are commonly found on TI EVMs for AM437x and DRA7x SoCs. Enable support for this driver in defconfig for omap2plus devices. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 23:27:37 +08:00
CONFIG_MTD_SPI_NOR=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_MTD_UBI=y
ARM: omap2plus_defconfig: Enable zram as loadable modules Enable zram as loadable modules. This allows mounting some part of memory as swap on low memory devices. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_ZRAM=m
CONFIG_ZRAM_WRITEBACK=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_SENSORS_TSL2550=m
ARM: OMAP4+: Move SRAM data to DT Use drivers/misc/sram.c driver to manage SRAM on all DT only OMAP platforms (am33xx, am43xx, omap4 and omap5) instead of the existing private plat-omap/sram.c Address and size related data is removed from mach-omap2/sram.c and now passed to drivers/misc/sram.c from DT. Users can hence use general purpose allocator apis instead of OMAP private ones to manage and use SRAM. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-11 00:04:03 +08:00
CONFIG_SRAM=y
ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-19 17:31:32 +08:00
CONFIG_PCI_ENDPOINT_TEST=m
ARM: omap2plus_defconfig: Enable AT24 eeprom AT24 compatible eeproms are used in BB family and X15 boards. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-23 00:51:08 +08:00
CONFIG_EEPROM_AT24=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SCAN_ASYNC=y
ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver OMAP5 and DRA7 platforms need the AHCI platform driver for SATA support. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24 19:41:37 +08:00
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
ARM: omap2plus_defconfig: enable ahci-dm816 module This is now supported on the dm8168-evm board, so enable it in the defconfig for omap2+. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-14 19:14:15 +08:00
CONFIG_AHCI_DM816=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_NETDEVICES=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig This ethernet device is used on devkit8000 board. Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-28 04:00:14 +08:00
CONFIG_DM9000=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
omap: Update and rename common defconfig for omap2plus devices This patch addresses below things - Renaming existing omap3_defconfig which has OMAP2, OMAP3 and OMAP4 builds enabled to more appropriate name 'omap2plus_defconfig' - L1 cache shift is suppose to be 5 on OMAP4 where as it is 6 on previous OMAPs. Keeping it to 5 is safer option for OMAP4 and previous OMAPs. For OMAP3 only build the shift would be still 6 - Enable needed Errata's for OMAP4 to work with DMA based device drivers CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y - Enable the Micrel ethernet controller CONFIG_KS8851=y CONFIG_KS8851_MLL=y With above three changes, OMAP4 ethernet, mmc etc works reliably. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-16 01:10:19 +08:00
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_STMICRO is not set
ARM: omap2plus_defconfig: Enable support for davinci_emac We have this on at least 3517-evm and dm8168-evm. Let's enable davinci_emac so those can be booted with NFSroot. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-20 01:52:23 +08:00
CONFIG_TI_DAVINCI_EMAC=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_TI_CPSW=y
ARM: omap2plus_defconfig: enable NET_SWITCHDEV The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig. Fixes: 3727d259ddaf ("arm: omap2plus_defconfig: enable new cpsw switchdev driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-05 01:45:33 +08:00
CONFIG_TI_CPSW_SWITCHDEV=y
ARM: omap2plus_defconfig: enable support for TI CPTS CPTS module of CPSW IP enables timestamp synchronization using PTP. Enable CPTS feature of CPSW driver. Available on AM335x, AM437x and DRA7x SoCs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 23:27:36 +08:00
CONFIG_TI_CPTS=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
ARM: omap2plus_defconfig: Enable TI Ethernet PHY DP83848_PHY i.e. [TI TLK10X 10/100 Mbps PHY] is used on the am335x-icev2 board. Enable the PHY driver for it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-14 20:51:19 +08:00
CONFIG_DP83848_PHY=y
ARM: omap2plus_defconfig: enable DP83867 phy driver TI's DP83867 phy is used on DRA72x EVM rev C and DRA71x EVMs. Enable support for it in omap2plus_defconfig. The driver is built into the kernel to help NFS booting. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-09 22:02:49 +08:00
CONFIG_DP83867_PHY=y
ARM: omap2plus_defconfig: Enable support for micrell phys The phyCORE-AM335x SoM with PCM-953 carrierboard has a KSZ9021 phy mounted. To add support for this we need to enable the micrell phy driver in the config. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24 18:09:35 +08:00
CONFIG_MICREL_PHY=y
ARM: omap2plus_defconfig: Update for moved and dropped options Looks like CONFIG_MTD_M25P80 no longer exists and the others just move around the existing options. This makes it easier to create patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-07 02:41:07 +08:00
CONFIG_AT803X_PHY=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SMSC_PHY=y
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:27 +08:00
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_USBNET=m
ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-13 00:11:04 +08:00
CONFIG_USB_NET_SMSC75XX=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_NET_SMSC95XX=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:27 +08:00
CONFIG_USB_NET_QMI_WWAN=m
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:48:44 +08:00
CONFIG_USB_CDC_PHONET=m
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_DEBUG=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig Many boards have either WL12XX or MWIFIEX, so let's build modules for those by default. This also makes it easier to test WLAN on pandaboard to avoid regressions like we had with the move to device tree based booting. And at least the zoom boards need the of_serial for the UARTs connected to the GPMC bus. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:21 +08:00
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules Otherwise mice won't be happy. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-02-17 22:51:17 +08:00
CONFIG_INPUT_MOUSEDEV=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_GPIO=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_KEYBOARD_MATRIX=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TWL4030=m
# CONFIG_INPUT_MOUSE is not set
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_TOUCHSCREEN_ADS7846=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreen AM437x Starter Kit ships with EDT FT5306 touchscreen device. By enabling the driver we make sure touchscreen will work out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:07:00 +08:00
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR Some of the OMAP based boards e.g. am437x-gp-evm have the Pixcir touch controller. Enable the related device driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-02 17:45:11 +08:00
CONFIG_TOUCHSCREEN_PIXCIR=m
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004 The LogicPD DM3730 Torpedo and SOM-LV devices have the TI TSC2004 touchscreen controller. Enable the related driver as a module. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-04 08:44:52 +08:00
CONFIG_TOUCHSCREEN_TSC2004=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_INPUT_MISC=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_INPUT_CPCAP_PWRBUTTON=m
ARM: omap2plus_defconfig: enable TPS65218 power button Enable tps65218 power button driver by default as a dynamically linked module so AM437x SK can report power button presses. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-27 03:28:24 +08:00
CONFIG_INPUT_TPS65218_PWRBUTTON=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_INPUT_TWL4030_PWRBUTTON=m
ARM: omap2plus_defconfig: Add UINPUT This can be used for keyboard fn keys with funkeymonkey. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 22:10:15 +08:00
CONFIG_INPUT_UINPUT=m
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 05:14:40 +08:00
CONFIG_INPUT_PALMAS_PWRBUTTON=m
ARM: omap2plus_defconfig: Enable PWM_VIBRA We can use PWM_VIBRA on many phones like droid 4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 22:09:46 +08:00
CONFIG_INPUT_PWM_VIBRA=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_SERIO=m
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
# CONFIG_LEGACY_PTYS is not set
ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial We should not select drivers from kconfig as they should by default be optional. Otherwise we'll be chasing broken dependencies forever: warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MWAVE) selects SERIAL_8250 which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS) Fix the issue by removing the selects for zoom and add them to omap2plus_defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-05 02:28:21 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SERIAL_8250_NR_UARTS=32
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-21 04:13:19 +08:00
CONFIG_SERIAL_8250_RUNTIME_UARTS=6
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
ARM: omap2plus_defconfig: Enable 8250_OMAP We've had 8250_OMAP working for few years now, so let's start enabling it by default. We provide users an option to warn by default with SERIAL_8250_OMAP_TTYO_FIXUP by default. That option updates the serial console to point to 8250 driver and warns about it. Users with ttyO[0123] in their /etc/inittab should update inittab to use ttyS[0123] instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 04:41:49 +08:00
CONFIG_SERIAL_8250_OMAP=y
ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig Many boards have either WL12XX or MWIFIEX, so let's build modules for those by default. This also makes it easier to test WLAN on pandaboard to avoid regressions like we had with the move to device tree based booting. And at least the zoom boards need the of_serial for the UARTs connected to the GPMC bus. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:21 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP Commit 8a6201b9 (ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial) fixed unmet direct dependencies for 8250, but failed to do the same for omap serial. This can cause the following warning: warning: (ARCH_OMAP2PLUS_TYPICAL) selects SERIAL_OMAP which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS && ARCH_OMAP2PLUS). We should not select drivers, they should be selected by the user. Fix the issue by removing the select and adding them to omap2plus_defconfig instead. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 01:54:29 +08:00
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:47:35 +08:00
CONFIG_SERIAL_DEV_BUS=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_SPI_TI_QSPI=m
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:48:44 +08:00
CONFIG_HSI=m
CONFIG_OMAP_SSI=m
CONFIG_SSI_PROTOCOL=m
net: ethernet: ti: Remove TI_CPTS_MOD workaround My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the form: drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop': cpsw.c:(.text+0x680): undefined reference to `cpts_unregister' ... That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts functions) _is_ enabled. So we end up compiling calls to functions that don't exist, resulting in the linker errors. This patch fixes build errors and restores previous behavior by: - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built - remove TI_CPTS_MOD and, instead, add dependencies from CPTS in TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below: config TI_CPSW_SWITCHDEV ... depends on TI_CPTS || !TI_CPTS which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS -> TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection. Note. For NFS boot + CPTS all of above configs have to be built-in. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Tony Lindgren <tony@atomide.com> Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Clay McClure <clay@daemons.net> [grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12 18:02:30 +08:00
CONFIG_PTP_1588_CLOCK=y
ARM: OMAP2+: select PINCTRL in Kconfig Select PINCTRL in Kconfig under Typical OMAP configuration, this is required to add pinctrl driver to omap2+ family of devices. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated to select pinctrl-single in defconfig] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-11 01:34:52 +08:00
CONFIG_PINCTRL_SINGLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
ARM: omap2plus_defconfig: enable GPIO_PCA953X This enables tca6424a GPIO expander driver that in turn enables TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm. In other words, it makes HDMI work on OMAP5 uevm. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16 06:36:20 +08:00
CONFIG_GPIO_PCA953X=m
ARM: omap2plus_defconfig: make PCF857x built-in One of the lines from PCF857x is connected to the vdd line of MMC1 in DRA74x and DRA72x EVMs and is modelled as a regulator. If PCF857x is not made as built-in, the regulator_get in omap_hsmmc fails making it difficult to use MMC1 as rootfs. Make PCF857x built-in. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05 21:43:49 +08:00
CONFIG_GPIO_PCF857X=y
ARM: omap2plus_defconfig: Enable LP87565 dra76-evm has LP87565. Enable it in omap2plus_defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-12 12:06:03 +08:00
CONFIG_GPIO_LP87565=y
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 05:14:40 +08:00
CONFIG_GPIO_PALMAS=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_GPIO_TWL4030=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_W1=m
CONFIG_HDQ_MASTER_OMAP=m
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules Enable more droid4 devices as loadable modules: - We have an isl29028 proximity sensor - Battery has an EEPROM that can be read with w1_ds250x Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_W1_SLAVE_DS250X=m
ARM: omap2plus_defconfig: Run make savedefconfig to save some space This shrinks down omap2plus_defconfig a bit and makes it easier for people to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-16 03:01:24 +08:00
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_POWER_RESET_GPIO=y
power: bq27x00_battery: Renaming for consistency Rename functions that are used by multiple devices. New devices have been added and the function names and driver name are no longer general enough for the functionality they provide. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23 03:35:06 +08:00
CONFIG_BATTERY_BQ27XXX=m
ARM: omap2plus_defconfig: Enable battery and reset drivers Since many omaps run on battery, we should have the battery drivers enabled. Let's also enable the reset driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24735=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_HWMON=m
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 05:14:40 +08:00
CONFIG_SENSORS_GPIO_FAN=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_SENSORS_LM75=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_SENSORS_TMP102=m
ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver Enable the bandgap driver for TI SoCs thermal support. Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-08 04:46:07 +08:00
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_CPU_THERMAL=y
CONFIG_TI_THERMAL=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
CONFIG_WATCHDOG=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_MFD_CPCAP=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_MFD_TI_AM335X_TSCADC=m
ARM: omap2plus_defconfig: Select MFD_TI_LMU We have REGULATOR_LM363X selected but not MFD_TI_LMU and REGULATOR_LM363X depends on MFD_TI_LMU. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:54:52 +08:00
CONFIG_MFD_TI_LMU=m
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_MFD_PALMAS=y
ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support TPS65217 is described in arch/arm/boot/dts/am335x-bone.dts but doesn't enabled in arch/arm/configs/omap2plus_defconfig. Enable TPS65217 support in omap2plus_defconfig. Signed-off-by: Igor Mazanov <i.mazanov@gmail.com> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 03:30:00 +08:00
CONFIG_MFD_TPS65217=y
ARM: omap2plus_defconfig: Enable LP873X support LP873X family of PMICs are used in dra71x-evm, So enable the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-21 18:38:41 +08:00
CONFIG_MFD_TI_LP873X=y
ARM: omap2plus_defconfig: Enable LP87565 dra76-evm has LP87565. Enable it in omap2plus_defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-12 12:06:03 +08:00
CONFIG_MFD_TI_LP87565=y
ARM: omap2plus_defconfig: enable TPS65218 configs Enable TPS65218 config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-09 13:36:33 +08:00
CONFIG_MFD_TPS65218=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_MFD_TPS65910=y
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09 07:48:02 +08:00
CONFIG_TWL6040_CORE=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_REGULATOR_CPCAP=y
ARM: omap2plus_defconfig: Enable REGULATOR_GPIO GPIO regulator is used on dra71-evm platform to control MMCSD IO voltage Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-21 18:38:40 +08:00
CONFIG_REGULATOR_GPIO=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_REGULATOR_LM363X=m
ARM: omap2plus_defconfig: Enable LP872x regulator support The LP872x regulator is used in the LG Optimus Black codename sniper to supply the external mmc card. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-28 20:39:44 +08:00
CONFIG_REGULATOR_LP872X=y
ARM: omap2plus_defconfig: Enable LP873X support LP873X family of PMICs are used in dra71x-evm, So enable the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-21 18:38:41 +08:00
CONFIG_REGULATOR_LP873X=y
ARM: omap2plus_defconfig: Enable LP87565 dra76-evm has LP87565. Enable it in omap2plus_defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-12 12:06:03 +08:00
CONFIG_REGULATOR_LP87565=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_REGULATOR_PALMAS=y
ARM: omap2plus_defconfig: Shrink with savedefconfig This saves few lines and makes it easier to make patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_REGULATOR_PBIAS=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:39 +08:00
CONFIG_REGULATOR_TI_ABB=y
ARM: omap2plus_defconfig: enable TPS62362 regulator This regulator is used on AM437x Industrial Development Kit. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-20 02:03:55 +08:00
CONFIG_REGULATOR_TPS62360=m
omap2/3/4: Update PMIC options for TWL and Menelaus chips These are needed for mounting root on MMC on many boards. Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the system from running with external watchdogs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 03:57:16 +08:00
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support TPS65217 is described in arch/arm/boot/dts/am335x-bone.dts but doesn't enabled in arch/arm/configs/omap2plus_defconfig. Enable TPS65217 support in omap2plus_defconfig. Signed-off-by: Igor Mazanov <i.mazanov@gmail.com> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 03:30:00 +08:00
CONFIG_REGULATOR_TPS65217=y
ARM: omap2plus_defconfig: enable TPS65218 configs Enable TPS65218 config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-09 13:36:33 +08:00
CONFIG_REGULATOR_TPS65218=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_REGULATOR_TPS65910=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_REGULATOR_TWL4030=y
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:29:08 +08:00
CONFIG_RC_CORE=m
ARM: omap2plus_defconfig: Update LIRC options We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 03:01:27 +08:00
CONFIG_LIRC=y
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:29:08 +08:00
CONFIG_RC_DEVICES=y
ARM: omap2plus_defconfig: Update LIRC options We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 03:01:27 +08:00
CONFIG_IR_SPI=m
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:29:08 +08:00
CONFIG_IR_RX51=m
ARM: omap2plus_defconfig: Update LIRC options We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 03:01:27 +08:00
CONFIG_IR_GPIO_TX=m
CONFIG_IR_PWM_TX=m
ARM: omap2plus_defconfig: Enable ISP support and dependencies The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate camera images processing. The ISP driver implements V4L2, Media Controller and V4L2 sub-dev interfaces so enable support for the driver and all these dependencies to allow video capture to be tested using this HW IP block. Also, disable the I2C ancillary drivers auto-select option since the media driver does not auto-select the ancillary devices that are attached to the bridge because this depends on what's present in the supported OMAP boards. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 01:53:02 +08:00
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: omap2plus_defconfig: Enable CEC We have CEC support available and working so let's enable it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 05:02:10 +08:00
CONFIG_MEDIA_CEC_SUPPORT=y
ARM: omap2plus_defconfig: Enable ISP support and dependencies The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate camera images processing. The ISP driver implements V4L2, Media Controller and V4L2 sub-dev interfaces so enable support for the driver and all these dependencies to allow video capture to be tested using this HW IP block. Also, disable the I2C ancillary drivers auto-select option since the media driver does not auto-select the ancillary devices that are attached to the bridge because this depends on what's present in the supported OMAP boards. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 01:53:02 +08:00
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_OMAP3=m
ARM: omap2plus_defconfig: Enable CEC We have CEC support available and working so let's enable it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 05:02:10 +08:00
CONFIG_CEC_PLATFORM_DRIVERS=y
ARM: omap2plus_defconfig: Enable ISP support and dependencies The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate camera images processing. The ISP driver implements V4L2, Media Controller and V4L2 sub-dev interfaces so enable support for the driver and all these dependencies to allow video capture to be tested using this HW IP block. Also, disable the I2C ancillary drivers auto-select option since the media driver does not auto-select the ancillary devices that are attached to the bridge because this depends on what's present in the supported OMAP boards. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 01:53:02 +08:00
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3 ISP so enable support for its driver as a module to be able to test it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 01:53:03 +08:00
CONFIG_VIDEO_TVP5150=m
configs: omap2plus: Enable VIDEO_MT9P031 module The Logic PD Torpedo Development Kit supports a Leopard Imaging camera based on the Aptina MT9P031 sensor. This patch enables this to be built as a module. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08 03:49:13 +08:00
CONFIG_VIDEO_MT9P031=m
ARM: omap2plus_defconfig: Switch to use omapdrm by default We've had omapdrm working for few years now so let's use it by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 05:08:59 +08:00
CONFIG_DRM=m
CONFIG_DRM_OMAP=m
CONFIG_OMAP5_DSS_HDMI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_DRM_OMAP_PANEL_DSI_CM=m
CONFIG_DRM_TILCDC=m
ARM: omap2plus_defconfig: Fix missing video When the panel-dpi driver was removed, the simple-panels driver was never enabled, so anyone who used the panel-dpi driver lost video, and those who used it inconjunction with simple-panels would have to manually enable CONFIG_DRM_PANEL_SIMPLE. This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same way the deprecated panel-dpi was. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-29 02:33:49 +08:00
CONFIG_DRM_PANEL_SIMPLE=m
ARM: omap2plus_defconfig: Fix selected panels after generic panel changes The old omapdrm panels got removed for v5.4 in favor of generic panels, and the Kconfig options changed. Let's update omap2plus_defconfig accordingly so the same panels are still enabled. Cc: Jyri Sarha <jsarha@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-04 00:44:10 +08:00
CONFIG_DRM_PANEL_LG_LB035Q02=m
CONFIG_DRM_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_PANEL_SONY_ACX565AKM=m
CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
ARM: defconfig updates As usual, tons of new drivers and other options got merged and are now enabled in the defconfig files, usually as loadable modules. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaVcACgkQmmx57+YA GNmYTg/+OBcECrckvyq1LP5x1AnENle1QB4CTKH180TOKXu311IfkOvrDKw3sXlD VkWyjayTjhv3LRmESJsps03qjYSSHNIOyyspqkTFov/qHZaDBfpDVeqNpnuKstrb y7DWaNqkYNf1eV6vt2m4khplpnGP52OQLuNC2x8RTRdkDL1i5OfAs1UH3fGq6qsl dGvfLF6yXKq4Y84Z8jUYGOz4/s1IsKbHK6hvTjocrBCdwqPRJgvLJkwy3X43kWaq NDFerbLd+ZOYI5siVr5Rd95zt0JSOLkfGDJgpu/KAnotBJxzKmkF4VrKLh00i9NJ QwpV/ndqImALDLeEKHUe0fDkCk9tbzsC8ApqNuv+M5KJ7C3J7O9UWyZm1tbsZcSJ NNziz8jSTsp6tOEmLFeLPWdH/i+1j7WljVQaAkqvZuCAgGs24voqUuwvo+6Ulh5b VLrfoE45VCIBgSch4VACzTdBbxVufO9yZkZZV2mlQEKdXFj1h2KaKZU0Lg9n5LRI 1UFgK+b8Dw2xVZWOxcivcav0GM3CMRd1ZW1ruHlrRcbPhM4JcUUqmmANKW+LmbLo 0+Rh6ZXywH8FtQVDq9DMsVqZxpmPbJF5gPw3T145mgEb32ogwLi7M5fcNkqm8KZR KyZseaIg2iMnY25vTZmnQlafcyrTXix1OfD/gC06CaW9eMCueSM= =NkVs -----END PGP SIGNATURE----- Merge tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "As usual, tons of new drivers and other options got merged and are now enabled in the defconfig files, usually as loadable modules" * tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits) ARM: omap2plus_defconfig: Update for moved and dropped options ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable zram as loadable modules ARM: omap2plus_defconfig: Enable simple-pm-bus arm64: defconfig: Enable Qualcomm SDM845 audio configs arm64: defconfig: Enable e1000 device arm64: defconfig: Enable PHY devices used on QorIQ boards arm64: defconfig: Enable RTC devices for QorIQ boards arm64: defconfig: Enable flash device drivers for QorIQ boards arm64: defconfig: Enable ARM Mali display driver arm64: defconfig: Enable QorIQ GPIO driver arm64: defconfig: Enable QorIQ IFC NAND controller driver arm64: defconfig: Enable ARM SBSA watchdog driver arm64: defconfig: Enable QorIQ cpufreq driver arm64: defconfig: Enable NXP/FSL SPI controller drivers arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch arm64: defconfig: Enable QorIQ DPAA2 drivers arm64: defconfig: Enable QorIQ DPAA1 drivers ...
2020-04-04 06:15:10 +08:00
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_DRM_SIMPLE_BRIDGE=m
ARM: omap2plus_defconfig: Update for moved and dropped options Looks like CONFIG_MTD_M25P80 no longer exists and the others just move around the existing options. This makes it easier to create patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-07 02:41:07 +08:00
CONFIG_DRM_TI_TFP410=m
ARM: defconfig updates As usual, tons of new drivers and other options got merged and are now enabled in the defconfig files, usually as loadable modules. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaVcACgkQmmx57+YA GNmYTg/+OBcECrckvyq1LP5x1AnENle1QB4CTKH180TOKXu311IfkOvrDKw3sXlD VkWyjayTjhv3LRmESJsps03qjYSSHNIOyyspqkTFov/qHZaDBfpDVeqNpnuKstrb y7DWaNqkYNf1eV6vt2m4khplpnGP52OQLuNC2x8RTRdkDL1i5OfAs1UH3fGq6qsl dGvfLF6yXKq4Y84Z8jUYGOz4/s1IsKbHK6hvTjocrBCdwqPRJgvLJkwy3X43kWaq NDFerbLd+ZOYI5siVr5Rd95zt0JSOLkfGDJgpu/KAnotBJxzKmkF4VrKLh00i9NJ QwpV/ndqImALDLeEKHUe0fDkCk9tbzsC8ApqNuv+M5KJ7C3J7O9UWyZm1tbsZcSJ NNziz8jSTsp6tOEmLFeLPWdH/i+1j7WljVQaAkqvZuCAgGs24voqUuwvo+6Ulh5b VLrfoE45VCIBgSch4VACzTdBbxVufO9yZkZZV2mlQEKdXFj1h2KaKZU0Lg9n5LRI 1UFgK+b8Dw2xVZWOxcivcav0GM3CMRd1ZW1ruHlrRcbPhM4JcUUqmmANKW+LmbLo 0+Rh6ZXywH8FtQVDq9DMsVqZxpmPbJF5gPw3T145mgEb32ogwLi7M5fcNkqm8KZR KyZseaIg2iMnY25vTZmnQlafcyrTXix1OfD/gC06CaW9eMCueSM= =NkVs -----END PGP SIGNATURE----- Merge tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "As usual, tons of new drivers and other options got merged and are now enabled in the defconfig files, usually as loadable modules" * tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits) ARM: omap2plus_defconfig: Update for moved and dropped options ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable zram as loadable modules ARM: omap2plus_defconfig: Enable simple-pm-bus arm64: defconfig: Enable Qualcomm SDM845 audio configs arm64: defconfig: Enable e1000 device arm64: defconfig: Enable PHY devices used on QorIQ boards arm64: defconfig: Enable RTC devices for QorIQ boards arm64: defconfig: Enable flash device drivers for QorIQ boards arm64: defconfig: Enable ARM Mali display driver arm64: defconfig: Enable QorIQ GPIO driver arm64: defconfig: Enable QorIQ IFC NAND controller driver arm64: defconfig: Enable ARM SBSA watchdog driver arm64: defconfig: Enable QorIQ cpufreq driver arm64: defconfig: Enable NXP/FSL SPI controller drivers arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch arm64: defconfig: Enable QorIQ DPAA2 drivers arm64: defconfig: Enable QorIQ DPAA1 drivers ...
2020-04-04 06:15:10 +08:00
CONFIG_DRM_TI_TPD12S015=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_GPIO=m
ARM: dts: droid4: Configure LED backlight for lm3532 With the LED backlight changes merged, we still need the dts configured to have backlight working for droid4. Based on an earlier patch from Pavel Machek <pavel@ucw.cz>, let's configure the backlight but update the value range to be more usable. We have a range of 256 register values split into 8 steps, so we can generate the brightness levels backwards with: $ for i in 0 1 2 3 4 5 6 7; do echo "255 - ${i} * (256 / 8)" | bc; done To avoid more confusion why the LCD backlight is still not on, let's also enable LED backlight as a loadable module for omap2plus_defconfig. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-20 03:25:27 +08:00
CONFIG_BACKLIGHT_LED=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_SOUND=m
CONFIG_SND=m
ARM: omap2plus_defconfig: Add SND_OSSEMUL We have SND_MIXER_OSS and SND_PCM_OSS but they now depend on SND_OSSEMUL selecting SOUND_OSS_CORE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 04:34:17 +08:00
CONFIG_SND_OSSEMUL=y
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
ARM: omap2plus_defconfig: Update the audio options Use the new options for default audio support and enable Nokia n900 audio as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-17 20:21:39 +08:00
CONFIG_SND_SOC_DAVINCI_MCASP=m
CONFIG_SND_SOC_NOKIA_RX51=m
CONFIG_SND_SOC_OMAP3_PANDORA=m
CONFIG_SND_SOC_OMAP3_TWL4030=m
ARM: omap2plus_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-02-01 01:42:59 +08:00
CONFIG_SND_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_SOC_OMAP_HDMI=m
ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARD This is needed for audio on droid 4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 22:09:55 +08:00
CONFIG_SND_SOC_CPCAP=m
ARM: omap2plus_defconfig: Add tlv320aic23 as module The AM3517 EVM has an expander board which has two tlv320aic23 codecs. This enables the driver for these codecs as a module. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-23 23:37:16 +08:00
CONFIG_SND_SOC_TLV320AIC23_I2C=m
ARM: omap2plus_defconfig: Enable audio related config options More and more boards are moving to have audio support via simple-card. At the same time enable options needed for most am335x and am43xx board for audio support: McASP and TLV320AIC3X codecs. The later two has been selected by the CONFIG_SND_AM33XX_SOC_EVM option, but the aim is to convert all boards to use simple card. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-02 22:06:16 +08:00
CONFIG_SND_SIMPLE_CARD=m
ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARD This is needed for audio on droid 4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 22:09:55 +08:00
CONFIG_SND_AUDIO_GRAPH_CARD=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_HID_GENERIC=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_MON=m
ARM: omap2plus_defconfig: enable XHCI AM437x devices have a DWC3 IP inside of them. The host side implementation of DWC3 is XHCI compliant. By enabling XHCI driver, we get the USB host port on AM437x Starter Kit working out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:07:02 +08:00
CONFIG_USB_XHCI_HCD=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:27 +08:00
CONFIG_USB_ACM=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_STORAGE=m
CONFIG_USB_MUSB_HDRC=m
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working With the recent Kconfig changes we need to now enable the PHYs to keep USB working. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-11 15:24:27 +08:00
CONFIG_USB_MUSB_TUSB6010=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
ARM: omap2plus_defconfig: Enable MUSB DMA support With recent MUSB changes we can now build in support for multiple DMA implementations. So let's enable DMA by default to make life easier for distro use. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-02 04:59:25 +08:00
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working With the recent Kconfig changes we need to now enable the PHYs to keep USB working. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-11 15:24:27 +08:00
CONFIG_USB_TUSB_OMAP_DMA=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_USB_DWC3=m
ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-13 00:11:04 +08:00
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules Droid4 needs USB option serial driver for modem, and lm3532 for the LCD backlight. Note that the LCD backlight does not yet get enabled automatically, but needs to be done manually with: # echo 50 > /sys/class/leds/lm3532::backlight/brightness Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-23 01:57:40 +08:00
CONFIG_USB_SERIAL_OPTION=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_TEST=m
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working With the recent Kconfig changes we need to now enable the PHYs to keep USB working. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-11 15:24:27 +08:00
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_PHY_USB=m
ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module This is in use on omap4 boards. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-27 01:31:23 +08:00
CONFIG_TWL6030_USB=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_GADGET=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:48:44 +08:00
CONFIG_USB_CONFIGFS_PHONET=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
omap2/3: Update omap3_defconfig to build in all the 2420 based boards Note that booting 2420 depends on another patch posted earlier to not select CONFIG_CPU_32v6K if CONFIG_ARCH_OMAP2 is selected. Also note that we cannot add omap2430 in yet because of the different clock addresses compared to 2420. Also note that we cannot have CONFIG_CPU_32v6K=y in order to boot on 24xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-13 04:26:49 +08:00
CONFIG_USB_ZERO=m
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 03:48:44 +08:00
CONFIG_USB_G_NOKIA=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MMC=y
CONFIG_SDIO_UART=y
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7 based SoC's can use sdhci-omap driver for eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-06 20:57:53 +08:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
omap2/3/4: Make omap3_defconfig usable on Nokia boards The bootloader on Nokia boards does not support updating the kernel cmdline. For the other boards, the bootloader provided cmdline will be used instead. To mount root on n8x0, compile in also the MMC_OMAP. It seems that the best way to mount root with the new kernels on Nokia boards is to mount root on mmcblk0p2. Note that n8x0 current has several issues booting with omap3_defconfig: The bootloader has a 2MB limit for loading kernels, so you may want to use kexec. Also ARMv6 does not currently work with ARMv7 for VFP and TLS. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 03:57:16 +08:00
CONFIG_MMC_OMAP=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MMC_OMAP_HS=y
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7 based SoC's can use sdhci-omap driver for eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-06 20:57:53 +08:00
CONFIG_MMC_SDHCI_OMAP=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_NEW_LEDS=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_LEDS_CLASS=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_LEDS_CPCAP=m
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules Droid4 needs USB option serial driver for modem, and lm3532 for the LCD backlight. Note that the LCD backlight does not yet get enabled automatically, but needs to be done manually with: # echo 50 > /sys/class/leds/lm3532::backlight/brightness Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-23 01:57:40 +08:00
CONFIG_LEDS_LM3532=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_LEDS_GPIO=m
ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-13 00:11:04 +08:00
CONFIG_LEDS_PCA963X=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_LEDS_PWM=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_LEDS_TRIGGERS=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_LEDS_TRIGGER_CPU=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_RTC_CLASS=y
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 05:14:40 +08:00
CONFIG_RTC_DRV_DS1307=m
ARM: omap2plus_defconfig: Enable support for RTC M41T80 The phyCORE-AM335x SoM has a RV4162 RTC populated which is supported by the M41T80 driver. Enabled it so make the RTC support on the SoM available. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24 18:09:36 +08:00
CONFIG_RTC_DRV_M41T80=m
omap2/3/4: Update PMIC options for TWL and Menelaus chips These are needed for mounting root on MMC on many boards. Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the system from running with external watchdogs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 03:57:16 +08:00
CONFIG_RTC_DRV_TWL92330=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_RTC_DRV_TWL4030=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_RTC_DRV_PALMAS=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_RTC_DRV_OMAP=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_RTC_DRV_CPCAP=m
ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine commit 13f30fc893e4610f67dd7a8b0b67aec02eac1775 Author: Russell King <rmk+kernel@arm.linux.org.uk> Date: Sat Apr 21 22:41:10 2012 +0100 mmc: omap: remove private DMA API implementation removed the private DMA API implementation from the OMAP mmc host to exclusively use the DMA engine API. Unfortunately OMAP MMC and High Speed MMC host drivers don't support poll mode and only works with DMA. Since omap2plus_defconfig doesn't enable this feature by default, the following error is happens on an IGEPv2 Rev.C (and probably on most OMAP boards with MMC support): [ 2.199981] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine channel 48 [ 2.215087] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62 Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31 00:59:48 +08:00
CONFIG_DMADEVICES=y
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules The McPDM module is only usable on hardware where it's module clock is wired to the PMIC. Let's enable the optional PMIC module clocks for this so boards can use McPDM. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_CLK_TWL6040=m
CONFIG_COMMON_CLK_PALMAS=m
ARM: omap2plus_defconfig: Enable OMAP IOMMU support OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so enable it to be able to test the OMAP3 Image Signal Processor (ISP). Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 01:53:01 +08:00
CONFIG_OMAP_IOMMU=y
arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y Commit 6334150e9a36 ("remoteproc: don't allow modular build") changes CONFIG_REMOTEPROC to a boolean from a tristate config option which inhibits all defconfigs marking CONFIG_REMOTEPROC as a module in compiling the remoteproc and dependent config options. So fix the configs to have CONFIG_REMOTEPROC built in. Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com Fixes: 6334150e9a36 ("remoteproc: don't allow modular build") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Will Deacon <will@kernel.org> [olof: Fixed up all 4 occurrances in this one commit] Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-20 15:59:46 +08:00
CONFIG_REMOTEPROC=y
ARM: omap2plus_defconfig: Enable am335x and am437x PM options These are needed to enable low-power suspend mode as described by Dave. Note that these depend on the am335x-pm-firmware.elf. Cc: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 04:47:48 +08:00
CONFIG_OMAP_REMOTEPROC=m
CONFIG_WKUP_M3_RPROC=m
CONFIG_SOC_TI=y
CONFIG_AMX3_PM=m
CONFIG_WKUP_M3_IPC=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_EXTCON_PALMAS=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 05:39:45 +08:00
CONFIG_EXTCON_USB_GPIO=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_TI_EMIF=m
ARM: omap2plus_defconfig: Enable am335x and am437x PM options These are needed to enable low-power suspend mode as described by Dave. Note that these depend on the am335x-pm-firmware.elf. Cc: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 04:47:48 +08:00
CONFIG_TI_EMIF_SRAM=m
ARM: omap2plus_defconfig: enable support for TI ADC Enable support for on-chip ADC found on AM335x and AM437x devices. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 23:27:34 +08:00
CONFIG_IIO=m
ARM: defconfig: omap2plus: switch LIS3LV02DL driver The OMAP2 plus defconfig lists the LIS3LC02D MISC driver but there is nowadays a proper IIO driver for this accelerometer. Switch the config to the new driver. The IIO software triggers are helpful when using these devices without a dedicated IRQ line, so activate those too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-05 21:54:00 +08:00
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-11 00:29:40 +08:00
CONFIG_CPCAP_ADC=m
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module Some devices have ina2xx_adc on i2c for measuring power consumption and can nowadays just read the output via IIO. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_INA2XX_ADC=m
ARM: omap2plus_defconfig: enable support for TI ADC Enable support for on-chip ADC found on AM335x and AM437x devices. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 23:27:34 +08:00
CONFIG_TI_AM335X_ADC=m
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules Enable more droid4 devices as loadable modules: - We have an isl29028 proximity sensor - Battery has an EEPROM that can be read with w1_ds250x Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_SENSORS_ISL29028=m
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver This alters the OMAP2plus defconfig to use the IIO BMP280 driver, which is compatible with the BMP085 instead of the old BMP085-specific misc driver. The IIO driver nowadays have all the features of the old driver and more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-24 22:24:12 +08:00
CONFIG_BMP280=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_PWM=y
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules These are available on n900. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-28 00:40:09 +08:00
CONFIG_PWM_OMAP_DMTIMER=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_PWM_TIECAP=m
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
ARM: omap2plus_defconfig: Enable droid 4 USB PHY Let's enable this as loadable module for droid 4. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-10-21 01:55:46 +08:00
CONFIG_PHY_CPCAP_USB=m
ARM: omap2plus_defconfig: Enable MDM6600 USB PHY This allows droid 4 USB modem to work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 22:10:07 +08:00
CONFIG_PHY_MAPPHONE_MDM6600=m
ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module This is needed for USB on dm816x-evm. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: George Cherian <george.cherian@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-30 01:10:23 +08:00
CONFIG_PHY_DM816X_USB=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 01:56:27 +08:00
CONFIG_OMAP_USB2=m
ARM: omap2plus_defconfig: Fix SATA boot SATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-23 23:18:37 +08:00
CONFIG_TI_PIPE3=y
ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig Enable TWL4030_USB which is used at least on Nokia N900/N950/N9 (OMAP3) and BeagleBoard. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-27 05:07:29 +08:00
CONFIG_TWL4030_USB=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
ARM: omap2plus_defconfig: Enable ext4 security for setcap Enable ext4 security for setcap. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-15 05:25:37 +08:00
CONFIG_EXT4_FS_SECURITY=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_FANOTIFY=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in Commit 673ce00c5d6c (ARM: omap2plus_defconfig: Add support for distros with systemd) caused considerable bloat as noted by Paul Walmsley <paul@pwsan.com>. Let's fix this issue by making what we can into loadable modules for the systemd options. That's only IPV6 and AUTOFS4_FS it seems, and IPv6 defaults to a loadable module. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-28 00:00:21 +08:00
CONFIG_AUTOFS4_FS=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_TMPFS_POSIX_ACL=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_MICHAEL_MIC=y
ARM: omap2plus_defconfig: Enable HW Crypto engine modules The general-purpose OMAP3530, OMAP3630, and DM3730 have hardware crypto engines that appear to be functional despite limited documentation. This patch enables them as modules. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-04 00:30:08 +08:00
CONFIG_CRYPTO_DEV_OMAP=m
CONFIG_CRYPTO_DEV_OMAP_SHAM=m
CONFIG_CRYPTO_DEV_OMAP_AES=m
CONFIG_CRYPTO_DEV_OMAP_DES=m
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:29:08 +08:00
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
ARM: omap2plus_defconfig: Update for moved item When running make savedefconfig ARCH=arm, CONFIG_DMA_CMA changed location. To help facilitate future changes to omap2plus_defconfig, this patch re-syncs the omap2plus file with the updated location generated by make savedefconfig. No items were removed or added during this patch. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-04 00:30:07 +08:00
CONFIG_DMA_CMA=y
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:29:08 +08:00
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
ARM: omap2plus_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-02-01 01:42:59 +08:00
CONFIG_PRINTK_TIME=y
ARM: omap2plus_defconfig: Update for moved and dropped options Looks like CONFIG_MTD_M25P80 no longer exists and the others just move around the existing options. This makes it easier to create patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-07 02:41:07 +08:00
# CONFIG_DEBUG_BUGVERBOSE is not set
ARM: omap2plus_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-02-01 01:42:59 +08:00
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_MAGIC_SYSRQ=y
ARM: omap2plus_defconfig: Add back DEBUG_FS Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it at least for enabling deeper idle states for the SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-10 05:41:17 +08:00
CONFIG_DEBUG_FS=y
ARM: omap2plus_defconfig: Update for moved options These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-02-01 01:42:59 +08:00
CONFIG_SCHEDSTATS=y