OpenCloudOS-Kernel/include/linux/stacktrace.h

44 lines
1.4 KiB
C
Raw Normal View History

#ifndef __LINUX_STACKTRACE_H
#define __LINUX_STACKTRACE_H
#include <linux/types.h>
struct task_struct;
x86: Eliminate bp argument from the stack tracing routines The various stack tracing routines take a 'bp' argument in which the caller is supposed to provide the base pointer to use, or 0 if doesn't have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not defined, this means all callers in principle should either always pass 0, or be conditional on CONFIG_FRAME_POINTER. However, there are only really three use cases for stack tracing: (a) Trace the current task, including IRQ stack if any (b) Trace the current task, but skip IRQ stack (c) Trace some other task In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just be 0. If it _is_ defined, then - in case (a) bp should be gotten directly from the CPU's register, so the caller should pass NULL for regs, - in case (b) the caller should should pass the IRQ registers to dump_trace(), - in case (c) bp should be gotten from the top of the task's stack, so the caller should pass NULL for regs. Hence, the bp argument is not necessary because the combination of task and regs is sufficient to determine an appropriate value for bp. This patch introduces a new inline function stack_frame(task, regs) that computes the desired bp. This function is then called from the two versions of dump_stack(). Signed-off-by: Soren Sandmann <ssp@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org>, Cc: Frederic Weisbecker <fweisbec@gmail.com>, Cc: Arnaldo Carvalho de Melo <acme@redhat.com>, LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-11-05 17:59:39 +08:00
struct pt_regs;
#ifdef CONFIG_STACKTRACE
struct stack_trace {
unsigned int nr_entries, max_entries;
unsigned long *entries;
int skip; /* input argument: How many entries to skip */
};
extern void save_stack_trace(struct stack_trace *trace);
extern void save_stack_trace_regs(struct pt_regs *regs,
struct stack_trace *trace);
extern void save_stack_trace_tsk(struct task_struct *tsk,
struct stack_trace *trace);
stacktrace/x86: add function for detecting reliable stack traces For live patching and possibly other use cases, a stack trace is only useful if it can be assured that it's completely reliable. Add a new save_stack_trace_tsk_reliable() function to achieve that. Note that if the target task isn't the current task, and the target task is allowed to run, then it could be writing the stack while the unwinder is reading it, resulting in possible corruption. So the caller of save_stack_trace_tsk_reliable() must ensure that the task is either 'current' or inactive. save_stack_trace_tsk_reliable() relies on the x86 unwinder's detection of pt_regs on the stack. If the pt_regs are not user-mode registers from a syscall, then they indicate an in-kernel interrupt or exception (e.g. preemption or a page fault), in which case the stack is considered unreliable due to the nature of frame pointers. It also relies on the x86 unwinder's detection of other issues, such as: - corrupted stack data - stack grows the wrong way - stack walk doesn't reach the bottom - user didn't provide a large enough entries array Such issues are reported by checking unwind_error() and !unwind_done(). Also add CONFIG_HAVE_RELIABLE_STACKTRACE so arch-independent code can determine at build time whether the function is implemented. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 09:42:28 +08:00
extern int save_stack_trace_tsk_reliable(struct task_struct *tsk,
struct stack_trace *trace);
extern void print_stack_trace(struct stack_trace *trace, int spaces);
extern int snprint_stack_trace(char *buf, size_t size,
struct stack_trace *trace, int spaces);
#ifdef CONFIG_USER_STACKTRACE_SUPPORT
extern void save_stack_trace_user(struct stack_trace *trace);
#else
# define save_stack_trace_user(trace) do { } while (0)
#endif
stacktrace/x86: add function for detecting reliable stack traces For live patching and possibly other use cases, a stack trace is only useful if it can be assured that it's completely reliable. Add a new save_stack_trace_tsk_reliable() function to achieve that. Note that if the target task isn't the current task, and the target task is allowed to run, then it could be writing the stack while the unwinder is reading it, resulting in possible corruption. So the caller of save_stack_trace_tsk_reliable() must ensure that the task is either 'current' or inactive. save_stack_trace_tsk_reliable() relies on the x86 unwinder's detection of pt_regs on the stack. If the pt_regs are not user-mode registers from a syscall, then they indicate an in-kernel interrupt or exception (e.g. preemption or a page fault), in which case the stack is considered unreliable due to the nature of frame pointers. It also relies on the x86 unwinder's detection of other issues, such as: - corrupted stack data - stack grows the wrong way - stack walk doesn't reach the bottom - user didn't provide a large enough entries array Such issues are reported by checking unwind_error() and !unwind_done(). Also add CONFIG_HAVE_RELIABLE_STACKTRACE so arch-independent code can determine at build time whether the function is implemented. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 09:42:28 +08:00
#else /* !CONFIG_STACKTRACE */
# define save_stack_trace(trace) do { } while (0)
# define save_stack_trace_tsk(tsk, trace) do { } while (0)
# define save_stack_trace_user(trace) do { } while (0)
# define print_stack_trace(trace, spaces) do { } while (0)
# define snprint_stack_trace(buf, size, trace, spaces) do { } while (0)
stacktrace/x86: add function for detecting reliable stack traces For live patching and possibly other use cases, a stack trace is only useful if it can be assured that it's completely reliable. Add a new save_stack_trace_tsk_reliable() function to achieve that. Note that if the target task isn't the current task, and the target task is allowed to run, then it could be writing the stack while the unwinder is reading it, resulting in possible corruption. So the caller of save_stack_trace_tsk_reliable() must ensure that the task is either 'current' or inactive. save_stack_trace_tsk_reliable() relies on the x86 unwinder's detection of pt_regs on the stack. If the pt_regs are not user-mode registers from a syscall, then they indicate an in-kernel interrupt or exception (e.g. preemption or a page fault), in which case the stack is considered unreliable due to the nature of frame pointers. It also relies on the x86 unwinder's detection of other issues, such as: - corrupted stack data - stack grows the wrong way - stack walk doesn't reach the bottom - user didn't provide a large enough entries array Such issues are reported by checking unwind_error() and !unwind_done(). Also add CONFIG_HAVE_RELIABLE_STACKTRACE so arch-independent code can determine at build time whether the function is implemented. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 09:42:28 +08:00
# define save_stack_trace_tsk_reliable(tsk, trace) ({ -ENOSYS; })
#endif /* CONFIG_STACKTRACE */
stacktrace/x86: add function for detecting reliable stack traces For live patching and possibly other use cases, a stack trace is only useful if it can be assured that it's completely reliable. Add a new save_stack_trace_tsk_reliable() function to achieve that. Note that if the target task isn't the current task, and the target task is allowed to run, then it could be writing the stack while the unwinder is reading it, resulting in possible corruption. So the caller of save_stack_trace_tsk_reliable() must ensure that the task is either 'current' or inactive. save_stack_trace_tsk_reliable() relies on the x86 unwinder's detection of pt_regs on the stack. If the pt_regs are not user-mode registers from a syscall, then they indicate an in-kernel interrupt or exception (e.g. preemption or a page fault), in which case the stack is considered unreliable due to the nature of frame pointers. It also relies on the x86 unwinder's detection of other issues, such as: - corrupted stack data - stack grows the wrong way - stack walk doesn't reach the bottom - user didn't provide a large enough entries array Such issues are reported by checking unwind_error() and !unwind_done(). Also add CONFIG_HAVE_RELIABLE_STACKTRACE so arch-independent code can determine at build time whether the function is implemented. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 09:42:28 +08:00
#endif /* __LINUX_STACKTRACE_H */