OpenCloudOS-Kernel/drivers/pci/pci.h

147 lines
5.0 KiB
C
Raw Normal View History

/* Functions internal to the PCI core code */
extern int pci_uevent(struct device *dev, struct kobj_uevent_env *env);
extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
extern void pci_cleanup_rom(struct pci_dev *dev);
/**
* Firmware PM callbacks
*
* @is_manageable - returns 'true' if given device is power manageable by the
* platform firmware
*
* @set_state - invokes the platform firmware to set the device's power state
*
* @choose_state - returns PCI power state of given device preferred by the
* platform; to be used during system-wide transitions from a
* sleeping state to the working state and vice versa
*
PCI ACPI: Rework PCI handling of wake-up * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 09:34:48 +08:00
* @can_wakeup - returns 'true' if given device is capable of waking up the
* system from a sleeping state
*
* @sleep_wake - enables/disables the system wake up capability of given device
*
* If given platform is generally capable of power managing PCI devices, all of
* these callbacks are mandatory.
*/
struct pci_platform_pm_ops {
bool (*is_manageable)(struct pci_dev *dev);
int (*set_state)(struct pci_dev *dev, pci_power_t state);
pci_power_t (*choose_state)(struct pci_dev *dev);
PCI ACPI: Rework PCI handling of wake-up * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 09:34:48 +08:00
bool (*can_wakeup)(struct pci_dev *dev);
int (*sleep_wake)(struct pci_dev *dev, bool enable);
};
extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
PCI ACPI: Rework PCI handling of wake-up * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 09:34:48 +08:00
extern void pci_pm_init(struct pci_dev *dev);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
extern int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
extern int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
extern int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
struct pci_vpd_ops {
int (*read)(struct pci_dev *dev, int pos, int size, char *buf);
int (*write)(struct pci_dev *dev, int pos, int size, const char *buf);
void (*release)(struct pci_dev *dev);
};
struct pci_vpd {
unsigned int len;
struct pci_vpd_ops *ops;
struct bin_attribute *attr; /* descriptor for sysfs VPD entry */
};
extern int pci_vpd_pci22_init(struct pci_dev *dev);
static inline void pci_vpd_release(struct pci_dev *dev)
{
if (dev->vpd)
dev->vpd->ops->release(dev);
}
/* PCI /proc functions */
#ifdef CONFIG_PROC_FS
extern int pci_proc_attach_device(struct pci_dev *dev);
extern int pci_proc_detach_device(struct pci_dev *dev);
extern int pci_proc_detach_bus(struct pci_bus *bus);
#else
static inline int pci_proc_attach_device(struct pci_dev *dev) { return 0; }
static inline int pci_proc_detach_device(struct pci_dev *dev) { return 0; }
static inline int pci_proc_detach_bus(struct pci_bus *bus) { return 0; }
#endif
/* Functions for PCI Hotplug drivers to use */
extern unsigned int pci_do_scan_bus(struct pci_bus *bus);
extern void pci_remove_legacy_files(struct pci_bus *bus);
/* Lock for read/write access to pci device and bus lists */
extern struct rw_semaphore pci_bus_sem;
extern unsigned int pci_pm_d3_delay;
#ifdef CONFIG_PCI_MSI
void pci_no_msi(void);
extern void pci_msi_init_pci_dev(struct pci_dev *dev);
#else
static inline void pci_no_msi(void) { }
static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { }
#endif
#ifdef CONFIG_PCIEAER
void pci_no_aer(void);
#else
static inline void pci_no_aer(void) { }
#endif
static inline int pci_no_d1d2(struct pci_dev *dev)
{
unsigned int parent_dstates = 0;
if (dev->bus->self)
parent_dstates = dev->bus->self->no_d1d2;
return (dev->no_d1d2 || parent_dstates);
}
extern int pcie_mch_quirk;
extern struct device_attribute pci_dev_attrs[];
extern struct device_attribute dev_attr_cpuaffinity;
/**
* pci_match_one_device - Tell if a PCI device structure has a matching
* PCI device id structure
* @id: single PCI device id structure to match
* @dev: the PCI device structure to match against
*
* Returns the matching pci_device_id structure or %NULL if there is no match.
*/
static inline const struct pci_device_id *
pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev)
{
if ((id->vendor == PCI_ANY_ID || id->vendor == dev->vendor) &&
(id->device == PCI_ANY_ID || id->device == dev->device) &&
(id->subvendor == PCI_ANY_ID || id->subvendor == dev->subsystem_vendor) &&
(id->subdevice == PCI_ANY_ID || id->subdevice == dev->subsystem_device) &&
!((id->class ^ dev->class) & id->class_mask))
return id;
return NULL;
}
struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-11 05:28:50 +08:00
/* PCI slot sysfs helper code */
#define to_pci_slot(s) container_of(s, struct pci_slot, kobj)
extern struct kset *pci_slots_kset;
struct pci_slot_attribute {
struct attribute attr;
ssize_t (*show)(struct pci_slot *, char *);
ssize_t (*store)(struct pci_slot *, const char *, size_t);
};
#define to_pci_slot_attr(s) container_of(s, struct pci_slot_attribute, attr)