OpenCloudOS-Kernel/mm/damon/dbgfs.c

624 lines
13 KiB
C
Raw Normal View History

mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* DAMON Debugfs Interface
*
* Author: SeongJae Park <sjpark@amazon.de>
*/
#define pr_fmt(fmt) "damon-dbgfs: " fmt
#include <linux/damon.h>
#include <linux/debugfs.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/page_idle.h>
#include <linux/slab.h>
static struct damon_ctx **dbgfs_ctxs;
static int dbgfs_nr_ctxs;
static struct dentry **dbgfs_dirs;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
static DEFINE_MUTEX(damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
/*
* Returns non-empty string on success, negative error code otherwise.
*/
static char *user_input_str(const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
ssize_t ret;
/* We do not accept continuous write */
if (*ppos)
return ERR_PTR(-EINVAL);
kbuf = kmalloc(count + 1, GFP_KERNEL);
if (!kbuf)
return ERR_PTR(-ENOMEM);
ret = simple_write_to_buffer(kbuf, count + 1, ppos, buf, count);
if (ret != count) {
kfree(kbuf);
return ERR_PTR(-EIO);
}
kbuf[ret] = '\0';
return kbuf;
}
static ssize_t dbgfs_attrs_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char kbuf[128];
int ret;
mutex_lock(&ctx->kdamond_lock);
ret = scnprintf(kbuf, ARRAY_SIZE(kbuf), "%lu %lu %lu %lu %lu\n",
ctx->sample_interval, ctx->aggr_interval,
ctx->primitive_update_interval, ctx->min_nr_regions,
ctx->max_nr_regions);
mutex_unlock(&ctx->kdamond_lock);
return simple_read_from_buffer(buf, count, ppos, kbuf, ret);
}
static ssize_t dbgfs_attrs_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
unsigned long s, a, r, minr, maxr;
char *kbuf;
ssize_t ret = count;
int err;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
if (sscanf(kbuf, "%lu %lu %lu %lu %lu",
&s, &a, &r, &minr, &maxr) != 5) {
ret = -EINVAL;
goto out;
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
ret = -EBUSY;
goto unlock_out;
}
err = damon_set_attrs(ctx, s, a, r, minr, maxr);
if (err)
ret = err;
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
out:
kfree(kbuf);
return ret;
}
static inline bool targetid_is_pid(const struct damon_ctx *ctx)
{
return ctx->primitive.target_valid == damon_va_target_valid;
}
static ssize_t sprint_target_ids(struct damon_ctx *ctx, char *buf, ssize_t len)
{
struct damon_target *t;
unsigned long id;
int written = 0;
int rc;
damon_for_each_target(t, ctx) {
id = t->id;
if (targetid_is_pid(ctx))
/* Show pid numbers to debugfs users */
id = (unsigned long)pid_vnr((struct pid *)id);
rc = scnprintf(&buf[written], len - written, "%lu ", id);
if (!rc)
return -ENOMEM;
written += rc;
}
if (written)
written -= 1;
written += scnprintf(&buf[written], len - written, "\n");
return written;
}
static ssize_t dbgfs_target_ids_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
ssize_t len;
char ids_buf[320];
mutex_lock(&ctx->kdamond_lock);
len = sprint_target_ids(ctx, ids_buf, 320);
mutex_unlock(&ctx->kdamond_lock);
if (len < 0)
return len;
return simple_read_from_buffer(buf, count, ppos, ids_buf, len);
}
/*
* Converts a string into an array of unsigned long integers
*
* Returns an array of unsigned long integers if the conversion success, or
* NULL otherwise.
*/
static unsigned long *str_to_target_ids(const char *str, ssize_t len,
ssize_t *nr_ids)
{
unsigned long *ids;
const int max_nr_ids = 32;
unsigned long id;
int pos = 0, parsed, ret;
*nr_ids = 0;
ids = kmalloc_array(max_nr_ids, sizeof(id), GFP_KERNEL);
if (!ids)
return NULL;
while (*nr_ids < max_nr_ids && pos < len) {
ret = sscanf(&str[pos], "%lu%n", &id, &parsed);
pos += parsed;
if (ret != 1)
break;
ids[*nr_ids] = id;
*nr_ids += 1;
}
return ids;
}
static void dbgfs_put_pids(unsigned long *ids, int nr_ids)
{
int i;
for (i = 0; i < nr_ids; i++)
put_pid((struct pid *)ids[i]);
}
static ssize_t dbgfs_target_ids_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf, *nrs;
unsigned long *targets;
ssize_t nr_targets;
ssize_t ret = count;
int i;
int err;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
nrs = kbuf;
targets = str_to_target_ids(nrs, ret, &nr_targets);
if (!targets) {
ret = -ENOMEM;
goto out;
}
if (targetid_is_pid(ctx)) {
for (i = 0; i < nr_targets; i++) {
targets[i] = (unsigned long)find_get_pid(
(int)targets[i]);
if (!targets[i]) {
dbgfs_put_pids(targets, i);
ret = -EINVAL;
goto free_targets_out;
}
}
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
if (targetid_is_pid(ctx))
dbgfs_put_pids(targets, nr_targets);
ret = -EBUSY;
goto unlock_out;
}
err = damon_set_targets(ctx, targets, nr_targets);
if (err) {
if (targetid_is_pid(ctx))
dbgfs_put_pids(targets, nr_targets);
ret = err;
}
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
free_targets_out:
kfree(targets);
out:
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:57 +08:00
static ssize_t dbgfs_kdamond_pid_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t len;
kbuf = kmalloc(count, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond)
len = scnprintf(kbuf, count, "%d\n", ctx->kdamond->pid);
else
len = scnprintf(kbuf, count, "none\n");
mutex_unlock(&ctx->kdamond_lock);
if (!len)
goto out;
len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
out:
kfree(kbuf);
return len;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static int damon_dbgfs_open(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return nonseekable_open(inode, file);
}
static const struct file_operations attrs_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_attrs_read,
.write = dbgfs_attrs_write,
};
static const struct file_operations target_ids_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_target_ids_read,
.write = dbgfs_target_ids_write,
};
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:57 +08:00
static const struct file_operations kdamond_pid_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_kdamond_pid_read,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static void dbgfs_fill_ctx_dir(struct dentry *dir, struct damon_ctx *ctx)
{
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:57 +08:00
const char * const file_names[] = {"attrs", "target_ids",
"kdamond_pid"};
const struct file_operations *fops[] = {&attrs_fops, &target_ids_fops,
&kdamond_pid_fops};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
int i;
for (i = 0; i < ARRAY_SIZE(file_names); i++)
debugfs_create_file(file_names[i], 0600, dir, ctx, fops[i]);
}
static int dbgfs_before_terminate(struct damon_ctx *ctx)
{
struct damon_target *t, *next;
if (!targetid_is_pid(ctx))
return 0;
damon_for_each_target_safe(t, next, ctx) {
put_pid((struct pid *)t->id);
damon_destroy_target(t);
}
return 0;
}
static struct damon_ctx *dbgfs_new_ctx(void)
{
struct damon_ctx *ctx;
ctx = damon_new_ctx();
if (!ctx)
return NULL;
damon_va_set_primitives(ctx);
ctx->callback.before_terminate = dbgfs_before_terminate;
return ctx;
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
static void dbgfs_destroy_ctx(struct damon_ctx *ctx)
{
damon_destroy_ctx(ctx);
}
/*
* Make a context of @name and create a debugfs directory for it.
*
* This function should be called while holding damon_dbgfs_lock.
*
* Returns 0 on success, negative error code otherwise.
*/
static int dbgfs_mk_context(char *name)
{
struct dentry *root, **new_dirs, *new_dir;
struct damon_ctx **new_ctxs, *new_ctx;
if (damon_nr_running_ctxs())
return -EBUSY;
new_ctxs = krealloc(dbgfs_ctxs, sizeof(*dbgfs_ctxs) *
(dbgfs_nr_ctxs + 1), GFP_KERNEL);
if (!new_ctxs)
return -ENOMEM;
dbgfs_ctxs = new_ctxs;
new_dirs = krealloc(dbgfs_dirs, sizeof(*dbgfs_dirs) *
(dbgfs_nr_ctxs + 1), GFP_KERNEL);
if (!new_dirs)
return -ENOMEM;
dbgfs_dirs = new_dirs;
root = dbgfs_dirs[0];
if (!root)
return -ENOENT;
new_dir = debugfs_create_dir(name, root);
dbgfs_dirs[dbgfs_nr_ctxs] = new_dir;
new_ctx = dbgfs_new_ctx();
if (!new_ctx) {
debugfs_remove(new_dir);
dbgfs_dirs[dbgfs_nr_ctxs] = NULL;
return -ENOMEM;
}
dbgfs_ctxs[dbgfs_nr_ctxs] = new_ctx;
dbgfs_fill_ctx_dir(dbgfs_dirs[dbgfs_nr_ctxs],
dbgfs_ctxs[dbgfs_nr_ctxs]);
dbgfs_nr_ctxs++;
return 0;
}
static ssize_t dbgfs_mk_context_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
char *ctx_name;
ssize_t ret = count;
int err;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
ctx_name = kmalloc(count + 1, GFP_KERNEL);
if (!ctx_name) {
kfree(kbuf);
return -ENOMEM;
}
/* Trim white space */
if (sscanf(kbuf, "%s", ctx_name) != 1) {
ret = -EINVAL;
goto out;
}
mutex_lock(&damon_dbgfs_lock);
err = dbgfs_mk_context(ctx_name);
if (err)
ret = err;
mutex_unlock(&damon_dbgfs_lock);
out:
kfree(kbuf);
kfree(ctx_name);
return ret;
}
/*
* Remove a context of @name and its debugfs directory.
*
* This function should be called while holding damon_dbgfs_lock.
*
* Return 0 on success, negative error code otherwise.
*/
static int dbgfs_rm_context(char *name)
{
struct dentry *root, *dir, **new_dirs;
struct damon_ctx **new_ctxs;
int i, j;
if (damon_nr_running_ctxs())
return -EBUSY;
root = dbgfs_dirs[0];
if (!root)
return -ENOENT;
dir = debugfs_lookup(name, root);
if (!dir)
return -ENOENT;
new_dirs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_dirs),
GFP_KERNEL);
if (!new_dirs)
return -ENOMEM;
new_ctxs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_ctxs),
GFP_KERNEL);
if (!new_ctxs) {
kfree(new_dirs);
return -ENOMEM;
}
for (i = 0, j = 0; i < dbgfs_nr_ctxs; i++) {
if (dbgfs_dirs[i] == dir) {
debugfs_remove(dbgfs_dirs[i]);
dbgfs_destroy_ctx(dbgfs_ctxs[i]);
continue;
}
new_dirs[j] = dbgfs_dirs[i];
new_ctxs[j++] = dbgfs_ctxs[i];
}
kfree(dbgfs_dirs);
kfree(dbgfs_ctxs);
dbgfs_dirs = new_dirs;
dbgfs_ctxs = new_ctxs;
dbgfs_nr_ctxs--;
return 0;
}
static ssize_t dbgfs_rm_context_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
ssize_t ret = count;
int err;
char *ctx_name;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
ctx_name = kmalloc(count + 1, GFP_KERNEL);
if (!ctx_name) {
kfree(kbuf);
return -ENOMEM;
}
/* Trim white space */
if (sscanf(kbuf, "%s", ctx_name) != 1) {
ret = -EINVAL;
goto out;
}
mutex_lock(&damon_dbgfs_lock);
err = dbgfs_rm_context(ctx_name);
if (err)
ret = err;
mutex_unlock(&damon_dbgfs_lock);
out:
kfree(kbuf);
kfree(ctx_name);
return ret;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static ssize_t dbgfs_monitor_on_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
char monitor_on_buf[5];
bool monitor_on = damon_nr_running_ctxs() != 0;
int len;
len = scnprintf(monitor_on_buf, 5, monitor_on ? "on\n" : "off\n");
return simple_read_from_buffer(buf, count, ppos, monitor_on_buf, len);
}
static ssize_t dbgfs_monitor_on_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
ssize_t ret = count;
char *kbuf;
int err;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
/* Remove white space */
if (sscanf(kbuf, "%s", kbuf) != 1) {
kfree(kbuf);
return -EINVAL;
}
if (!strncmp(kbuf, "on", count))
err = damon_start(dbgfs_ctxs, dbgfs_nr_ctxs);
else if (!strncmp(kbuf, "off", count))
err = damon_stop(dbgfs_ctxs, dbgfs_nr_ctxs);
else
err = -EINVAL;
if (err)
ret = err;
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
static const struct file_operations mk_contexts_fops = {
.write = dbgfs_mk_context_write,
};
static const struct file_operations rm_contexts_fops = {
.write = dbgfs_rm_context_write,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static const struct file_operations monitor_on_fops = {
.read = dbgfs_monitor_on_read,
.write = dbgfs_monitor_on_write,
};
static int __init __damon_dbgfs_init(void)
{
struct dentry *dbgfs_root;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
const char * const file_names[] = {"mk_contexts", "rm_contexts",
"monitor_on"};
const struct file_operations *fops[] = {&mk_contexts_fops,
&rm_contexts_fops, &monitor_on_fops};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
int i;
dbgfs_root = debugfs_create_dir("damon", NULL);
for (i = 0; i < ARRAY_SIZE(file_names); i++)
debugfs_create_file(file_names[i], 0600, dbgfs_root, NULL,
fops[i]);
dbgfs_fill_ctx_dir(dbgfs_root, dbgfs_ctxs[0]);
dbgfs_dirs = kmalloc_array(1, sizeof(dbgfs_root), GFP_KERNEL);
if (!dbgfs_dirs) {
debugfs_remove(dbgfs_root);
return -ENOMEM;
}
dbgfs_dirs[0] = dbgfs_root;
return 0;
}
/*
* Functions for the initialization
*/
static int __init damon_dbgfs_init(void)
{
int rc;
dbgfs_ctxs = kmalloc(sizeof(*dbgfs_ctxs), GFP_KERNEL);
if (!dbgfs_ctxs)
return -ENOMEM;
dbgfs_ctxs[0] = dbgfs_new_ctx();
if (!dbgfs_ctxs[0]) {
kfree(dbgfs_ctxs);
return -ENOMEM;
}
dbgfs_nr_ctxs = 1;
rc = __damon_dbgfs_init();
if (rc) {
kfree(dbgfs_ctxs[0]);
kfree(dbgfs_ctxs);
pr_err("%s: dbgfs init failed\n", __func__);
}
return rc;
}
module_init(damon_dbgfs_init);
mm/damon: add kunit tests This commit adds kunit based unit tests for the core and the virtual address spaces monitoring primitives of DAMON. Link: https://lkml.kernel.org/r/20210716081449.22187-12-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:09 +08:00
#include "dbgfs-test.h"