UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/of/Kconfig

93 lines
1.5 KiB
Plaintext
Raw Normal View History

of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
config DTC
bool
of: define CONFIG_OF globally so architectures can select it Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-29 10:45:51 +08:00
config OF
bool
of/promtree: make drivers/of/pdt.c no longer sparc-only Clean up pdt.c: - make build dependent upon config OF_PROMTREE - #ifdef out the sparc-specific stuff - create pdt-specific header Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-11 11:42:33 +08:00
menu "Device Tree and Open Firmware support"
of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
depends on OF
of/unittest: Rename selftest.c to unittest.c This is unit testing code. It should use that name because it makes more sense than 'selftest'. Rename the files to match and rename the config variable. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-04 21:24:45 +08:00
config OF_UNITTEST
bool "Device Tree runtime unit tests"
of: Fixing OF Selftest build error This patch is to fix following error while compiling OF selftests. "drivers/of/selftest.c:617:2: error: implicit declaration of function 'of_fdt_unflatten_tree'" Now, CONFIG_OF_SELFTEST depends on CONFIG_OF_EARLY_FLATTREE so that the broken configuration cannot be selected. Ultimately it would be a good idea to allow CONFIG_OF_SELFTEST to select CONFIG_OF_EARLY_FLATTREE, but there is a dependency problem on i386 and x86_64 that causes dtc to not get built and causes the build to fail. That problem needs to be fixed first. Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-07-26 10:57:38 +08:00
depends on OF_IRQ && OF_EARLY_FLATTREE
of/selftest: Use the resolver to fixup phandles The selftest data ends up causing duplicate phandles in the live tree for the time that the testcase data is inserted into the live tree. This is obviously a bad situation because anything attempting to read the tree while the selftests are running make resolve phandles to one of the testcase data nodes. Fix the problem by using the of_resolve_phandles() function to eliminate duplicates. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com>
2014-10-02 21:36:46 +08:00
select OF_RESOLVE
of: Add device tree selftests Add some runtime test cases for the library of device tree parsing functions. v2: - Add testcase for phandle with 0 args - Don't run testcases if testcase data isn't present in device tree Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13 00:25:57 +08:00
help
This option builds in test cases for the device tree infrastructure
of/Kconfig: Spelling s/one/once/ Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-25 04:06:01 +08:00
that are executed once at boot time, and the results dumped to the
of: Add device tree selftests Add some runtime test cases for the library of device tree parsing functions. v2: - Add testcase for phandle with 0 args - Don't run testcases if testcase data isn't present in device tree Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13 00:25:57 +08:00
console.
If unsure, say N here, but this option is safe to enable.
of/flattree: merge find_flat_dt_string and initial_boot_params Merge common code between Microblaze and PowerPC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-24 05:53:09 +08:00
config OF_FLATTREE
bool
of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
select DTC
of/fdt: Convert FDT functions to use libfdt The kernel FDT functions predate libfdt and are much more limited in functionality. Also, the kernel functions and libfdt functions are not compatible with each other because they have different definitions of node offsets. To avoid this incompatibility and in preparation to add more FDT parsing functions which will need libfdt, let's first convert the existing code to use libfdt. The FDT unflattening, top-level FDT scanning, and property retrieval functions are converted to use libfdt. The scanning code should be re-worked to be more efficient and understandable by using libfdt to find nodes directly by path or compatible strings. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Grant Likely <grant.likely@linaro.org> Tested-by: Stephen Chivers <schivers@csc.com>
2014-04-03 04:10:14 +08:00
select LIBFDT
of/fdt: export fdt blob as /sys/firmware/fdt Create a new /sys entry '/sys/firmware/fdt' to export the FDT blob that was passed to the kernel by the bootloader. This allows userland applications such as kexec to access the raw binary. The fact that this node does not reside under /sys/firmware/device-tree is deliberate: FDT is also used on arm64 UEFI/ACPI systems to communicate just the UEFI and ACPI entry points, but the FDT is never unflattened and used to configure the system. A CRC32 checksum is calculated over the entire FDT blob, and verified at late_initcall time. The sysfs entry is instantiated only if the checksum is valid, i.e., if the FDT blob has not been modified in the mean time. Otherwise, a warning is printed. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-15 01:05:35 +08:00
select CRC32
of/flattree: merge find_flat_dt_string and initial_boot_params Merge common code between Microblaze and PowerPC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-24 05:53:09 +08:00
of/flattree: Add Kconfig for EARLY_FLATTREE The device tree code is now in two pieces: some which can be used generically on any platform which selects CONFIG_OF_FLATTREE, and some early which is used at boot time on only a few architectures. This patch segregates the early code so that only those architectures which care about it need compile it. This also means that some of the requirements in the early code (such as a cmd_line variable) that most architectures (e.g. X86) don't provide can be ignored. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> [grant.likely@secretlab.ca: remove extra blank line addition] [grant.likely@secretlab.ca: fixed incorrect #ifdef CONFIG_EARLY_FLATTREE check] [grant.likely@secretlab.ca: Made OF_EARLY_FLATTREE select instead of depend on OF_FLATTREE] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-11-19 07:54:56 +08:00
config OF_EARLY_FLATTREE
bool
select OF_FLATTREE
of/promtree: make drivers/of/pdt.c no longer sparc-only Clean up pdt.c: - make build dependent upon config OF_PROMTREE - #ifdef out the sparc-specific stuff - create pdt-specific header Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-11 11:42:33 +08:00
config OF_PROMTREE
bool
of: Only compile OF_DYNAMIC on PowerPC pseries and iseries Only two architectures use the OF node reference counting and reclaim bits. There is no need to compile it for the rest of the PowerPC platforms or for any of the other architectures. This patch makes iseries and pseries select CONFIG_OF_DYNAMIC, and makes it default to off for everything else. It is still safe to turn on CONFIG_OF_DYNAMIC on all architectures, it just isn't necessary. v2: Also select OF_DYNAMIC for PPC_CHROMA and MPC885ADS as reported by Michael Meuling Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jimi Xenidis <jimix@pobox.com> (for PPC_CHROMA bug fix) Cc: Rob Herring <rob.herring@calxeda.com>
2012-02-16 11:38:40 +08:00
# Hardly any platforms need this. It is safe to select, but only do so if you
# need it.
of: merge of_attach_node() & of_detach_node() Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-29 20:04:33 +08:00
config OF_DYNAMIC
of: Only compile OF_DYNAMIC on PowerPC pseries and iseries Only two architectures use the OF node reference counting and reclaim bits. There is no need to compile it for the rest of the PowerPC platforms or for any of the other architectures. This patch makes iseries and pseries select CONFIG_OF_DYNAMIC, and makes it default to off for everything else. It is still safe to turn on CONFIG_OF_DYNAMIC on all architectures, it just isn't necessary. v2: Also select OF_DYNAMIC for PPC_CHROMA and MPC885ADS as reported by Michael Meuling Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jimi Xenidis <jimix@pobox.com> (for PPC_CHROMA bug fix) Cc: Rob Herring <rob.herring@calxeda.com>
2012-02-16 11:38:40 +08:00
bool
of: merge of_attach_node() & of_detach_node() Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-29 20:04:33 +08:00
of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-08 21:48:09 +08:00
config OF_ADDRESS
def_bool y
of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
depends on !SPARC
of: Allows to use the PCI translator without the PCI core Translating an address from a PCI node of the device-tree into a CPU physical address doesn't require the core PCI support. Those translations are just related to the device tree itself. The use case to translate an address from a PCI node without actually using the PCI core support is when one needs to access the PCI controller without accessing any PCI devices. Marvell SoCs, such as Kirkwood, Dove or Armada XP for instance, come with an IP of a PCI controller. In the registers of this controller are stored the ID and the revision of a SoC. With this patch it will be possible to read the SoC ID of a board without any PCI device and then without the PCI core support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-20 06:14:55 +08:00
select OF_ADDRESS_PCI if PCI
config OF_ADDRESS_PCI
bool
of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-08 21:48:09 +08:00
of/irq: Move irq_of_parse_and_map() to common code Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
2010-06-19 01:09:59 +08:00
config OF_IRQ
def_bool y
of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
depends on !SPARC
of/irq: Move irq_of_parse_and_map() to common code Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
2010-06-19 01:09:59 +08:00
of/net: Move of_get_mac_address() to a common source file. There are two identical implementations of of_get_mac_address(), one each in arch/powerpc/kernel/prom_parse.c and arch/microblaze/kernel/prom_parse.c. Move this function to a new common file of_net.{c,h} and adjust all the callers to include the new header. Signed-off-by: David Daney <ddaney@caviumnetworks.com> [grant.likely@secretlab.ca: protect header with #ifdef] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-27 06:07:13 +08:00
config OF_NET
depends on NETDEVICES
def_bool y
openfirmware: Add OF phylib support code Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-25 20:52:56 +08:00
config OF_MDIO
def_tristate PHYLIB
of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
depends on PHYLIB
openfirmware: Add OF phylib support code Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-25 20:52:56 +08:00
help
OpenFirmware MDIO bus (Ethernet PHY) accessors
of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
of/pci: move of_irq_map_pci() into generic code There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-24 12:28:55 +08:00
config OF_PCI
def_tristate PCI
pci/of: Match PCI devices to OF nodes dynamically powerpc has two different ways of matching PCI devices to their corresponding OF node (if any) for historical reasons. The ppc64 one does a scan looking for matching bus/dev/fn, while the ppc32 one does a scan looking only for matching dev/fn on each level in order to be agnostic to busses being renumbered (which Linux does on some platforms). This removes both and instead moves the matching code to the PCI core itself. It's the most logical place to do it: when a pci_dev is created, we know the parent and thus can do a single level scan for the matching device_node (if any). The benefit is that all archs now get the matching for free. There's one hook the arch might want to provide to match a PHB bus to its device node. A default weak implementation is provided that looks for the parent device device node, but it's not entirely reliable on powerpc for various reasons so powerpc provides its own. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-04-11 09:37:07 +08:00
depends on PCI
of/pci: move of_irq_map_pci() into generic code There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-24 12:28:55 +08:00
help
OpenFirmware PCI bus accessors
pci/of: Match PCI devices to OF nodes dynamically powerpc has two different ways of matching PCI devices to their corresponding OF node (if any) for historical reasons. The ppc64 one does a scan looking for matching bus/dev/fn, while the ppc32 one does a scan looking only for matching dev/fn on each level in order to be agnostic to busses being renumbered (which Linux does on some platforms). This removes both and instead moves the matching code to the PCI core itself. It's the most logical place to do it: when a pci_dev is created, we know the parent and thus can do a single level scan for the matching device_node (if any). The benefit is that all archs now get the matching for free. There's one hook the arch might want to provide to match a PHB bus to its device node. A default weak implementation is provided that looks for the parent device device node, but it's not entirely reliable on powerpc for various reasons so powerpc provides its own. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-04-11 09:37:07 +08:00
config OF_PCI_IRQ
def_tristate PCI
depends on OF_PCI && OF_IRQ
help
OpenFirmware PCI IRQ routing helpers
of/mtd/nand: add generic bindings and helpers - nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stefan Roese <sr@denx.de>
2012-01-28 12:12:36 +08:00
config OF_MTD
depends on MTD
def_bool y
drivers: of: add initialization code for dynamic reserved memory This patch adds support for dynamically allocated reserved memory regions declared in device tree. Such regions are defined by 'size', 'alignment' and 'alloc-ranges' properties. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-28 21:42:48 +08:00
config OF_RESERVED_MEM
depends on OF_EARLY_FLATTREE
bool
help
Helpers to allow for reservation of memory regions
of: Introduce Device Tree resolve support. Introduce support for dynamic device tree resolution. Using it, it is possible to prepare a device tree that's been loaded on runtime to be modified and inserted at the kernel live tree. Export of of_resolve and bug fix of double free by Guenter Roeck <groeck@juniper.net> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: Don't need to select CONFIG_OF_DYNAMIC and CONFIG_OF_DEVICE] [grant.likely: Don't need to depend on OF or !SPARC] [grant.likely: Factor out duplicate code blocks into single function] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-07-05 00:59:20 +08:00
config OF_RESOLVE
bool
of/overlay: Introduce DT overlay support Overlays are a method to dynamically modify part of the kernel's device tree with dynamically loaded data. Add the core functionality to parse, apply and remove an overlay changeset. The core functionality takes care of managing the overlay data format and performing the add and remove. Drivers are expected to use the overlay functionality to support custom expansion busses commonly found on consumer development boards like the BeagleBone or Raspberry Pi. The overlay code uses CONFIG_OF_DYNAMIC changesets to perform the low level work of modifying the devicetree. Documentation about internal and APIs is provided in Documentation/devicetree/overlay-notes.txt v2: - Switch from __of_node_alloc() to __of_node_dup() - Documentation fixups - Remove 2-pass processing of properties - Remove separate ov_lock; just use the DT mutex. v1: - Drop delete capability using '-' prefix. The '-' prefixed names are valid properties and nodes and there is no need for it just yet. - Do not update special properties - name & phandle ones. - Change order of node attachment, so that the special property update works. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-10-29 04:35:58 +08:00
config OF_OVERLAY
bool
depends on OF
select OF_DYNAMIC
select OF_RESOLVE
of: Put all CONFIG_OF dependencies into a Kconfig menu block All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06 02:02:13 +08:00
endmenu # OF