OpenCloudOS-Kernel/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c

1162 lines
30 KiB
C
Raw Normal View History

drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
/*
* Copyright 2011 (c) Oracle Corp.
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sub license,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
*/
/*
* A simple DMA pool losely based on dmapool.c. It has certain advantages
* over the DMA pools:
* - Pool collects resently freed pages for reuse (and hooks up to
* the shrinker).
* - Tracks currently in use pages
* - Tracks whether the page is UC, WB or cached (and reverts to WB
* when freed).
*/
#if defined(CONFIG_SWIOTLB) || defined(CONFIG_INTEL_IOMMU)
#define pr_fmt(fmt) "[TTM] " fmt
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/seq_file.h> /* for seq_printf */
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/highmem.h>
#include <linux/mm_types.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/atomic.h>
#include <linux/device.h>
#include <linux/kthread.h>
#include <drm/ttm/ttm_bo_driver.h>
#include <drm/ttm/ttm_page_alloc.h>
#if IS_ENABLED(CONFIG_AGP)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
#include <asm/agp.h>
#endif
#ifdef CONFIG_X86
#include <asm/set_memory.h>
#endif
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
#define NUM_PAGES_TO_ALLOC (PAGE_SIZE/sizeof(struct page *))
#define SMALL_ALLOCATION 4
#define FREE_ALL_PAGES (~0U)
/* times are in msecs */
#define IS_UNDEFINED (0)
#define IS_WC (1<<1)
#define IS_UC (1<<2)
#define IS_CACHED (1<<3)
#define IS_DMA32 (1<<4)
enum pool_type {
POOL_IS_UNDEFINED,
POOL_IS_WC = IS_WC,
POOL_IS_UC = IS_UC,
POOL_IS_CACHED = IS_CACHED,
POOL_IS_WC_DMA32 = IS_WC | IS_DMA32,
POOL_IS_UC_DMA32 = IS_UC | IS_DMA32,
POOL_IS_CACHED_DMA32 = IS_CACHED | IS_DMA32,
};
/*
* The pool structure. There are usually six pools:
* - generic (not restricted to DMA32):
* - write combined, uncached, cached.
* - dma32 (up to 2^32 - so up 4GB):
* - write combined, uncached, cached.
* for each 'struct device'. The 'cached' is for pages that are actively used.
* The other ones can be shrunk by the shrinker API if neccessary.
* @pools: The 'struct device->dma_pools' link.
* @type: Type of the pool
* @lock: Protects the inuse_list and free_list from concurrnet access. Must be
* used with irqsave/irqrestore variants because pool allocator maybe called
* from delayed work.
* @inuse_list: Pool of pages that are in use. The order is very important and
* it is in the order that the TTM pages that are put back are in.
* @free_list: Pool of pages that are free to be used. No order requirements.
* @dev: The device that is associated with these pools.
* @size: Size used during DMA allocation.
* @npages_free: Count of available pages for re-use.
* @npages_in_use: Count of pages that are in use.
* @nfrees: Stats when pool is shrinking.
* @nrefills: Stats when the pool is grown.
* @gfp_flags: Flags to pass for alloc_page.
* @name: Name of the pool.
* @dev_name: Name derieved from dev - similar to how dev_info works.
* Used during shutdown as the dev_info during release is unavailable.
*/
struct dma_pool {
struct list_head pools; /* The 'struct device->dma_pools link */
enum pool_type type;
spinlock_t lock;
struct list_head inuse_list;
struct list_head free_list;
struct device *dev;
unsigned size;
unsigned npages_free;
unsigned npages_in_use;
unsigned long nfrees; /* Stats when shrunk. */
unsigned long nrefills; /* Stats when grown. */
gfp_t gfp_flags;
char name[13]; /* "cached dma32" */
char dev_name[64]; /* Constructed from dev */
};
/*
* The accounting page keeping track of the allocated page along with
* the DMA address.
* @page_list: The link to the 'page_list' in 'struct dma_pool'.
* @vaddr: The virtual address of the page
* @dma: The bus address of the page. If the page is not allocated
* via the DMA API, it will be -1.
*/
struct dma_page {
struct list_head page_list;
void *vaddr;
struct page *p;
dma_addr_t dma;
};
/*
* Limits for the pool. They are handled without locks because only place where
* they may change is in sysfs store. They won't have immediate effect anyway
* so forcing serialization to access them is pointless.
*/
struct ttm_pool_opts {
unsigned alloc_size;
unsigned max_size;
unsigned small;
};
/*
* Contains the list of all of the 'struct device' and their corresponding
* DMA pools. Guarded by _mutex->lock.
* @pools: The link to 'struct ttm_pool_manager->pools'
* @dev: The 'struct device' associated with the 'pool'
* @pool: The 'struct dma_pool' associated with the 'dev'
*/
struct device_pools {
struct list_head pools;
struct device *dev;
struct dma_pool *pool;
};
/*
* struct ttm_pool_manager - Holds memory pools for fast allocation
*
* @lock: Lock used when adding/removing from pools
* @pools: List of 'struct device' and 'struct dma_pool' tuples.
* @options: Limits for the pool.
* @npools: Total amount of pools in existence.
* @shrinker: The structure used by [un|]register_shrinker
*/
struct ttm_pool_manager {
struct mutex lock;
struct list_head pools;
struct ttm_pool_opts options;
unsigned npools;
struct shrinker mm_shrink;
struct kobject kobj;
};
static struct ttm_pool_manager *_manager;
static struct attribute ttm_page_pool_max = {
.name = "pool_max_size",
.mode = S_IRUGO | S_IWUSR
};
static struct attribute ttm_page_pool_small = {
.name = "pool_small_allocation",
.mode = S_IRUGO | S_IWUSR
};
static struct attribute ttm_page_pool_alloc_size = {
.name = "pool_allocation_size",
.mode = S_IRUGO | S_IWUSR
};
static struct attribute *ttm_pool_attrs[] = {
&ttm_page_pool_max,
&ttm_page_pool_small,
&ttm_page_pool_alloc_size,
NULL
};
static void ttm_pool_kobj_release(struct kobject *kobj)
{
struct ttm_pool_manager *m =
container_of(kobj, struct ttm_pool_manager, kobj);
kfree(m);
}
static ssize_t ttm_pool_store(struct kobject *kobj, struct attribute *attr,
const char *buffer, size_t size)
{
struct ttm_pool_manager *m =
container_of(kobj, struct ttm_pool_manager, kobj);
int chars;
unsigned val;
chars = sscanf(buffer, "%u", &val);
if (chars == 0)
return size;
/* Convert kb to number of pages */
val = val / (PAGE_SIZE >> 10);
if (attr == &ttm_page_pool_max)
m->options.max_size = val;
else if (attr == &ttm_page_pool_small)
m->options.small = val;
else if (attr == &ttm_page_pool_alloc_size) {
if (val > NUM_PAGES_TO_ALLOC*8) {
pr_err("Setting allocation size to %lu is not allowed. Recommended size is %lu\n",
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 7),
NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
return size;
} else if (val > NUM_PAGES_TO_ALLOC) {
pr_warn("Setting allocation size to larger than %lu is not recommended\n",
NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
}
m->options.alloc_size = val;
}
return size;
}
static ssize_t ttm_pool_show(struct kobject *kobj, struct attribute *attr,
char *buffer)
{
struct ttm_pool_manager *m =
container_of(kobj, struct ttm_pool_manager, kobj);
unsigned val = 0;
if (attr == &ttm_page_pool_max)
val = m->options.max_size;
else if (attr == &ttm_page_pool_small)
val = m->options.small;
else if (attr == &ttm_page_pool_alloc_size)
val = m->options.alloc_size;
val = val * (PAGE_SIZE >> 10);
return snprintf(buffer, PAGE_SIZE, "%u\n", val);
}
static const struct sysfs_ops ttm_pool_sysfs_ops = {
.show = &ttm_pool_show,
.store = &ttm_pool_store,
};
static struct kobj_type ttm_pool_kobj_type = {
.release = &ttm_pool_kobj_release,
.sysfs_ops = &ttm_pool_sysfs_ops,
.default_attrs = ttm_pool_attrs,
};
#ifndef CONFIG_X86
static int set_pages_array_wb(struct page **pages, int addrinarray)
{
#if IS_ENABLED(CONFIG_AGP)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
int i;
for (i = 0; i < addrinarray; i++)
unmap_page_from_agp(pages[i]);
#endif
return 0;
}
static int set_pages_array_wc(struct page **pages, int addrinarray)
{
#if IS_ENABLED(CONFIG_AGP)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
int i;
for (i = 0; i < addrinarray; i++)
map_page_into_agp(pages[i]);
#endif
return 0;
}
static int set_pages_array_uc(struct page **pages, int addrinarray)
{
#if IS_ENABLED(CONFIG_AGP)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
int i;
for (i = 0; i < addrinarray; i++)
map_page_into_agp(pages[i]);
#endif
return 0;
}
#endif /* for !CONFIG_X86 */
static int ttm_set_pages_caching(struct dma_pool *pool,
struct page **pages, unsigned cpages)
{
int r = 0;
/* Set page caching */
if (pool->type & IS_UC) {
r = set_pages_array_uc(pages, cpages);
if (r)
pr_err("%s: Failed to set %d pages to uc!\n",
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
pool->dev_name, cpages);
}
if (pool->type & IS_WC) {
r = set_pages_array_wc(pages, cpages);
if (r)
pr_err("%s: Failed to set %d pages to wc!\n",
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
pool->dev_name, cpages);
}
return r;
}
static void __ttm_dma_free_page(struct dma_pool *pool, struct dma_page *d_page)
{
dma_addr_t dma = d_page->dma;
dma_free_coherent(pool->dev, pool->size, d_page->vaddr, dma);
kfree(d_page);
d_page = NULL;
}
static struct dma_page *__ttm_dma_alloc_page(struct dma_pool *pool)
{
struct dma_page *d_page;
d_page = kmalloc(sizeof(struct dma_page), GFP_KERNEL);
if (!d_page)
return NULL;
d_page->vaddr = dma_alloc_coherent(pool->dev, pool->size,
&d_page->dma,
pool->gfp_flags);
if (d_page->vaddr) {
if (is_vmalloc_addr(d_page->vaddr))
d_page->p = vmalloc_to_page(d_page->vaddr);
else
d_page->p = virt_to_page(d_page->vaddr);
} else {
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
kfree(d_page);
d_page = NULL;
}
return d_page;
}
static enum pool_type ttm_to_type(int flags, enum ttm_caching_state cstate)
{
enum pool_type type = IS_UNDEFINED;
if (flags & TTM_PAGE_FLAG_DMA32)
type |= IS_DMA32;
if (cstate == tt_cached)
type |= IS_CACHED;
else if (cstate == tt_uncached)
type |= IS_UC;
else
type |= IS_WC;
return type;
}
static void ttm_pool_update_free_locked(struct dma_pool *pool,
unsigned freed_pages)
{
pool->npages_free -= freed_pages;
pool->nfrees += freed_pages;
}
/* set memory back to wb and free the pages. */
static void ttm_dma_pages_put(struct dma_pool *pool, struct list_head *d_pages,
struct page *pages[], unsigned npages)
{
struct dma_page *d_page, *tmp;
drm/ttm/dma: Only call set_pages_array_wb when the page is not in WB pool. Otherwise we are doing redundant work. Especially since the 'unbind' and 'unpopulate' have been merged and nouveau driver ends up calling it quite excessivly. On a GeForce 8600 GT with Gnome Shell (GNOME 3) we end up spending about 54% CPU time in __change_page_attr_set_clr checking the page flags. The callgraph (annotated) looks as so before this patch: 53.29% gnome-shell [kernel.kallsyms] [k] static_protections | --- static_protections | |--91.80%-- __change_page_attr_set_clr | change_page_attr_set_clr | set_pages_array_wb | | | |--96.55%-- ttm_dma_unpopulate | | nouveau_ttm_tt_unpopulate | | ttm_tt_destroy | | ttm_bo_cleanup_memtype_use | | ttm_bo_release | | kref_put | | ttm_bo_unref | | nouveau_gem_object_del | | drm_gem_object_free | | kref_put | | drm_gem_object_unreference_unlocked | | drm_gem_object_handle_unreference_unlocked.part.1 | | drm_gem_handle_delete | | drm_gem_close_ioctl | | drm_ioctl | | do_vfs_ioctl | | sys_ioctl | | system_call_fastpath | | __GI___ioctl | | | --3.45%-- ttm_dma_pages_put | ttm_dma_page_pool_free | ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --8.20%-- change_page_attr_set_clr set_pages_array_wb | |--93.76%-- ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --6.24%-- ttm_dma_pages_put ttm_dma_page_pool_free ttm_dma_unpopulate nouveau_ttm_tt_unpopulate ttm_tt_destroy ttm_bo_cleanup_memtype_use ttm_bo_release kref_put ttm_bo_unref nouveau_gem_object_del drm_gem_object_free kref_put drm_gem_object_unreference_unlocked drm_gem_object_handle_unreference_unlocked.part.1 drm_gem_handle_delete drm_gem_close_ioctl drm_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath __GI___ioctl and after this patch all of that disappears. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05 05:35:14 +08:00
/* Don't set WB on WB page pool. */
if (npages && !(pool->type & IS_CACHED) &&
set_pages_array_wb(pages, npages))
pr_err("%s: Failed to set %d pages to wb!\n",
pool->dev_name, npages);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
list_for_each_entry_safe(d_page, tmp, d_pages, page_list) {
list_del(&d_page->page_list);
__ttm_dma_free_page(pool, d_page);
}
}
static void ttm_dma_page_put(struct dma_pool *pool, struct dma_page *d_page)
{
drm/ttm/dma: Only call set_pages_array_wb when the page is not in WB pool. Otherwise we are doing redundant work. Especially since the 'unbind' and 'unpopulate' have been merged and nouveau driver ends up calling it quite excessivly. On a GeForce 8600 GT with Gnome Shell (GNOME 3) we end up spending about 54% CPU time in __change_page_attr_set_clr checking the page flags. The callgraph (annotated) looks as so before this patch: 53.29% gnome-shell [kernel.kallsyms] [k] static_protections | --- static_protections | |--91.80%-- __change_page_attr_set_clr | change_page_attr_set_clr | set_pages_array_wb | | | |--96.55%-- ttm_dma_unpopulate | | nouveau_ttm_tt_unpopulate | | ttm_tt_destroy | | ttm_bo_cleanup_memtype_use | | ttm_bo_release | | kref_put | | ttm_bo_unref | | nouveau_gem_object_del | | drm_gem_object_free | | kref_put | | drm_gem_object_unreference_unlocked | | drm_gem_object_handle_unreference_unlocked.part.1 | | drm_gem_handle_delete | | drm_gem_close_ioctl | | drm_ioctl | | do_vfs_ioctl | | sys_ioctl | | system_call_fastpath | | __GI___ioctl | | | --3.45%-- ttm_dma_pages_put | ttm_dma_page_pool_free | ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --8.20%-- change_page_attr_set_clr set_pages_array_wb | |--93.76%-- ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --6.24%-- ttm_dma_pages_put ttm_dma_page_pool_free ttm_dma_unpopulate nouveau_ttm_tt_unpopulate ttm_tt_destroy ttm_bo_cleanup_memtype_use ttm_bo_release kref_put ttm_bo_unref nouveau_gem_object_del drm_gem_object_free kref_put drm_gem_object_unreference_unlocked drm_gem_object_handle_unreference_unlocked.part.1 drm_gem_handle_delete drm_gem_close_ioctl drm_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath __GI___ioctl and after this patch all of that disappears. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05 05:35:14 +08:00
/* Don't set WB on WB page pool. */
if (!(pool->type & IS_CACHED) && set_pages_array_wb(&d_page->p, 1))
pr_err("%s: Failed to set %d pages to wb!\n",
pool->dev_name, 1);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
list_del(&d_page->page_list);
__ttm_dma_free_page(pool, d_page);
}
/*
* Free pages from pool.
*
* To prevent hogging the ttm_swap process we only free NUM_PAGES_TO_ALLOC
* number of pages in one go.
*
* @pool: to free the pages from
* @nr_free: If set to true will free all pages in pool
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
* @use_static: Safe to use static buffer
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
**/
static unsigned ttm_dma_page_pool_free(struct dma_pool *pool, unsigned nr_free,
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
bool use_static)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
{
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
static struct page *static_buf[NUM_PAGES_TO_ALLOC];
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
unsigned long irq_flags;
struct dma_page *dma_p, *tmp;
struct page **pages_to_free;
struct list_head d_pages;
unsigned freed_pages = 0,
npages_to_free = nr_free;
if (NUM_PAGES_TO_ALLOC < nr_free)
npages_to_free = NUM_PAGES_TO_ALLOC;
#if 0
if (nr_free > 1) {
pr_debug("%s: (%s:%d) Attempting to free %d (%d) pages\n",
pool->dev_name, pool->name, current->pid,
npages_to_free, nr_free);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
}
#endif
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
if (use_static)
pages_to_free = static_buf;
else
pages_to_free = kmalloc(npages_to_free * sizeof(struct page *),
GFP_KERNEL);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
if (!pages_to_free) {
pr_err("%s: Failed to allocate memory for pool free operation\n",
pool->dev_name);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
return 0;
}
INIT_LIST_HEAD(&d_pages);
restart:
spin_lock_irqsave(&pool->lock, irq_flags);
/* We picking the oldest ones off the list */
list_for_each_entry_safe_reverse(dma_p, tmp, &pool->free_list,
page_list) {
if (freed_pages >= npages_to_free)
break;
/* Move the dma_page from one list to another. */
list_move(&dma_p->page_list, &d_pages);
pages_to_free[freed_pages++] = dma_p->p;
/* We can only remove NUM_PAGES_TO_ALLOC at a time. */
if (freed_pages >= NUM_PAGES_TO_ALLOC) {
ttm_pool_update_free_locked(pool, freed_pages);
/**
* Because changing page caching is costly
* we unlock the pool to prevent stalling.
*/
spin_unlock_irqrestore(&pool->lock, irq_flags);
ttm_dma_pages_put(pool, &d_pages, pages_to_free,
freed_pages);
INIT_LIST_HEAD(&d_pages);
if (likely(nr_free != FREE_ALL_PAGES))
nr_free -= freed_pages;
if (NUM_PAGES_TO_ALLOC >= nr_free)
npages_to_free = nr_free;
else
npages_to_free = NUM_PAGES_TO_ALLOC;
freed_pages = 0;
/* free all so restart the processing */
if (nr_free)
goto restart;
/* Not allowed to fall through or break because
* following context is inside spinlock while we are
* outside here.
*/
goto out;
}
}
/* remove range of pages from the pool */
if (freed_pages) {
ttm_pool_update_free_locked(pool, freed_pages);
nr_free -= freed_pages;
}
spin_unlock_irqrestore(&pool->lock, irq_flags);
if (freed_pages)
ttm_dma_pages_put(pool, &d_pages, pages_to_free, freed_pages);
out:
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
if (pages_to_free != static_buf)
kfree(pages_to_free);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
return nr_free;
}
static void ttm_dma_free_pool(struct device *dev, enum pool_type type)
{
struct device_pools *p;
struct dma_pool *pool;
if (!dev)
return;
mutex_lock(&_manager->lock);
list_for_each_entry_reverse(p, &_manager->pools, pools) {
if (p->dev != dev)
continue;
pool = p->pool;
if (pool->type != type)
continue;
list_del(&p->pools);
kfree(p);
_manager->npools--;
break;
}
list_for_each_entry_reverse(pool, &dev->dma_pools, pools) {
if (pool->type != type)
continue;
/* Takes a spinlock.. */
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
/* OK to use static buffer since global mutex is held. */
ttm_dma_page_pool_free(pool, FREE_ALL_PAGES, true);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
WARN_ON(((pool->npages_in_use + pool->npages_free) != 0));
/* This code path is called after _all_ references to the
* struct device has been dropped - so nobody should be
* touching it. In case somebody is trying to _add_ we are
* guarded by the mutex. */
list_del(&pool->pools);
kfree(pool);
break;
}
mutex_unlock(&_manager->lock);
}
/*
* On free-ing of the 'struct device' this deconstructor is run.
* Albeit the pool might have already been freed earlier.
*/
static void ttm_dma_pool_release(struct device *dev, void *res)
{
struct dma_pool *pool = *(struct dma_pool **)res;
if (pool)
ttm_dma_free_pool(dev, pool->type);
}
static int ttm_dma_pool_match(struct device *dev, void *res, void *match_data)
{
return *(struct dma_pool **)res == match_data;
}
static struct dma_pool *ttm_dma_pool_init(struct device *dev, gfp_t flags,
enum pool_type type)
{
char *n[] = {"wc", "uc", "cached", " dma32", "unknown",};
enum pool_type t[] = {IS_WC, IS_UC, IS_CACHED, IS_DMA32, IS_UNDEFINED};
struct device_pools *sec_pool = NULL;
struct dma_pool *pool = NULL, **ptr;
unsigned i;
int ret = -ENODEV;
char *p;
if (!dev)
return NULL;
ptr = devres_alloc(ttm_dma_pool_release, sizeof(*ptr), GFP_KERNEL);
if (!ptr)
return NULL;
ret = -ENOMEM;
pool = kmalloc_node(sizeof(struct dma_pool), GFP_KERNEL,
dev_to_node(dev));
if (!pool)
goto err_mem;
sec_pool = kmalloc_node(sizeof(struct device_pools), GFP_KERNEL,
dev_to_node(dev));
if (!sec_pool)
goto err_mem;
INIT_LIST_HEAD(&sec_pool->pools);
sec_pool->dev = dev;
sec_pool->pool = pool;
INIT_LIST_HEAD(&pool->free_list);
INIT_LIST_HEAD(&pool->inuse_list);
INIT_LIST_HEAD(&pool->pools);
spin_lock_init(&pool->lock);
pool->dev = dev;
pool->npages_free = pool->npages_in_use = 0;
pool->nfrees = 0;
pool->gfp_flags = flags;
pool->size = PAGE_SIZE;
pool->type = type;
pool->nrefills = 0;
p = pool->name;
for (i = 0; i < 5; i++) {
if (type & t[i]) {
p += snprintf(p, sizeof(pool->name) - (p - pool->name),
"%s", n[i]);
}
}
*p = 0;
/* We copy the name for pr_ calls b/c when dma_pool_destroy is called
* - the kobj->name has already been deallocated.*/
snprintf(pool->dev_name, sizeof(pool->dev_name), "%s %s",
dev_driver_string(dev), dev_name(dev));
mutex_lock(&_manager->lock);
/* You can get the dma_pool from either the global: */
list_add(&sec_pool->pools, &_manager->pools);
_manager->npools++;
/* or from 'struct device': */
list_add(&pool->pools, &dev->dma_pools);
mutex_unlock(&_manager->lock);
*ptr = pool;
devres_add(dev, ptr);
return pool;
err_mem:
devres_free(ptr);
kfree(sec_pool);
kfree(pool);
return ERR_PTR(ret);
}
static struct dma_pool *ttm_dma_find_pool(struct device *dev,
enum pool_type type)
{
struct dma_pool *pool, *tmp, *found = NULL;
if (type == IS_UNDEFINED)
return found;
/* NB: We iterate on the 'struct dev' which has no spinlock, but
* it does have a kref which we have taken. The kref is taken during
* graphic driver loading - in the drm_pci_init it calls either
* pci_dev_get or pci_register_driver which both end up taking a kref
* on 'struct device'.
*
* On teardown, the graphic drivers end up quiescing the TTM (put_pages)
* and calls the dev_res deconstructors: ttm_dma_pool_release. The nice
* thing is at that point of time there are no pages associated with the
* driver so this function will not be called.
*/
list_for_each_entry_safe(pool, tmp, &dev->dma_pools, pools) {
if (pool->type != type)
continue;
found = pool;
break;
}
return found;
}
/*
* Free pages the pages that failed to change the caching state. If there
* are pages that have changed their caching state already put them to the
* pool.
*/
static void ttm_dma_handle_caching_state_failure(struct dma_pool *pool,
struct list_head *d_pages,
struct page **failed_pages,
unsigned cpages)
{
struct dma_page *d_page, *tmp;
struct page *p;
unsigned i = 0;
p = failed_pages[0];
if (!p)
return;
/* Find the failed page. */
list_for_each_entry_safe(d_page, tmp, d_pages, page_list) {
if (d_page->p != p)
continue;
/* .. and then progress over the full list. */
list_del(&d_page->page_list);
__ttm_dma_free_page(pool, d_page);
if (++i < cpages)
p = failed_pages[i];
else
break;
}
}
/*
* Allocate 'count' pages, and put 'need' number of them on the
* 'pages' and as well on the 'dma_address' starting at 'dma_offset' offset.
* The full list of pages should also be on 'd_pages'.
* We return zero for success, and negative numbers as errors.
*/
static int ttm_dma_pool_alloc_new_pages(struct dma_pool *pool,
struct list_head *d_pages,
unsigned count)
{
struct page **caching_array;
struct dma_page *dma_p;
struct page *p;
int r = 0;
unsigned i, cpages;
unsigned max_cpages = min(count,
(unsigned)(PAGE_SIZE/sizeof(struct page *)));
/* allocate array for page caching change */
caching_array = kmalloc(max_cpages*sizeof(struct page *), GFP_KERNEL);
if (!caching_array) {
pr_err("%s: Unable to allocate table for new pages\n",
pool->dev_name);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
return -ENOMEM;
}
if (count > 1) {
pr_debug("%s: (%s:%d) Getting %d pages\n",
pool->dev_name, pool->name, current->pid, count);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
}
for (i = 0, cpages = 0; i < count; ++i) {
dma_p = __ttm_dma_alloc_page(pool);
if (!dma_p) {
pr_err("%s: Unable to get page %u\n",
pool->dev_name, i);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
/* store already allocated pages in the pool after
* setting the caching state */
if (cpages) {
r = ttm_set_pages_caching(pool, caching_array,
cpages);
if (r)
ttm_dma_handle_caching_state_failure(
pool, d_pages, caching_array,
cpages);
}
r = -ENOMEM;
goto out;
}
p = dma_p->p;
#ifdef CONFIG_HIGHMEM
/* gfp flags of highmem page should never be dma32 so we
* we should be fine in such case
*/
if (!PageHighMem(p))
#endif
{
caching_array[cpages++] = p;
if (cpages == max_cpages) {
/* Note: Cannot hold the spinlock */
r = ttm_set_pages_caching(pool, caching_array,
cpages);
if (r) {
ttm_dma_handle_caching_state_failure(
pool, d_pages, caching_array,
cpages);
goto out;
}
cpages = 0;
}
}
list_add(&dma_p->page_list, d_pages);
}
if (cpages) {
r = ttm_set_pages_caching(pool, caching_array, cpages);
if (r)
ttm_dma_handle_caching_state_failure(pool, d_pages,
caching_array, cpages);
}
out:
kfree(caching_array);
return r;
}
/*
* @return count of pages still required to fulfill the request.
*/
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
static int ttm_dma_page_pool_fill_locked(struct dma_pool *pool,
unsigned long *irq_flags)
{
unsigned count = _manager->options.small;
int r = pool->npages_free;
if (count > pool->npages_free) {
struct list_head d_pages;
INIT_LIST_HEAD(&d_pages);
spin_unlock_irqrestore(&pool->lock, *irq_flags);
/* Returns how many more are neccessary to fulfill the
* request. */
r = ttm_dma_pool_alloc_new_pages(pool, &d_pages, count);
spin_lock_irqsave(&pool->lock, *irq_flags);
if (!r) {
/* Add the fresh to the end.. */
list_splice(&d_pages, &pool->free_list);
++pool->nrefills;
pool->npages_free += count;
r = count;
} else {
struct dma_page *d_page;
unsigned cpages = 0;
pr_err("%s: Failed to fill %s pool (r:%d)!\n",
pool->dev_name, pool->name, r);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
list_for_each_entry(d_page, &d_pages, page_list) {
cpages++;
}
list_splice_tail(&d_pages, &pool->free_list);
pool->npages_free += cpages;
r = cpages;
}
}
return r;
}
/*
* @return count of pages still required to fulfill the request.
* The populate list is actually a stack (not that is matters as TTM
* allocates one page at a time.
*/
static int ttm_dma_pool_get_pages(struct dma_pool *pool,
struct ttm_dma_tt *ttm_dma,
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
unsigned index)
{
struct dma_page *d_page;
struct ttm_tt *ttm = &ttm_dma->ttm;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
unsigned long irq_flags;
int count, r = -ENOMEM;
spin_lock_irqsave(&pool->lock, irq_flags);
count = ttm_dma_page_pool_fill_locked(pool, &irq_flags);
if (count) {
d_page = list_first_entry(&pool->free_list, struct dma_page, page_list);
ttm->pages[index] = d_page->p;
ttm_dma->dma_address[index] = d_page->dma;
list_move_tail(&d_page->page_list, &ttm_dma->pages_list);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
r = 0;
pool->npages_in_use += 1;
pool->npages_free -= 1;
}
spin_unlock_irqrestore(&pool->lock, irq_flags);
return r;
}
/*
* On success pages list will hold count number of correctly
* cached pages. On failure will hold the negative return value (-ENOMEM, etc).
*/
int ttm_dma_populate(struct ttm_dma_tt *ttm_dma, struct device *dev)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
{
struct ttm_tt *ttm = &ttm_dma->ttm;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
struct ttm_mem_global *mem_glob = ttm->glob->mem_glob;
struct dma_pool *pool;
enum pool_type type;
unsigned i;
gfp_t gfp_flags;
int ret;
if (ttm->state != tt_unpopulated)
return 0;
type = ttm_to_type(ttm->page_flags, ttm->caching_state);
if (ttm->page_flags & TTM_PAGE_FLAG_DMA32)
gfp_flags = GFP_USER | GFP_DMA32;
else
gfp_flags = GFP_HIGHUSER;
if (ttm->page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
gfp_flags |= __GFP_ZERO;
pool = ttm_dma_find_pool(dev, type);
if (!pool) {
pool = ttm_dma_pool_init(dev, gfp_flags, type);
if (IS_ERR_OR_NULL(pool)) {
return -ENOMEM;
}
}
INIT_LIST_HEAD(&ttm_dma->pages_list);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
for (i = 0; i < ttm->num_pages; ++i) {
ret = ttm_dma_pool_get_pages(pool, ttm_dma, i);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
if (ret != 0) {
ttm_dma_unpopulate(ttm_dma, dev);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
return -ENOMEM;
}
ret = ttm_mem_global_alloc_page(mem_glob, ttm->pages[i],
false, false);
if (unlikely(ret != 0)) {
ttm_dma_unpopulate(ttm_dma, dev);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
return -ENOMEM;
}
}
if (unlikely(ttm->page_flags & TTM_PAGE_FLAG_SWAPPED)) {
ret = ttm_tt_swapin(ttm);
if (unlikely(ret != 0)) {
ttm_dma_unpopulate(ttm_dma, dev);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
return ret;
}
}
ttm->state = tt_unbound;
return 0;
}
EXPORT_SYMBOL_GPL(ttm_dma_populate);
/* Put all pages in pages list to correct pool to wait for reuse */
void ttm_dma_unpopulate(struct ttm_dma_tt *ttm_dma, struct device *dev)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
{
struct ttm_tt *ttm = &ttm_dma->ttm;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
struct dma_pool *pool;
struct dma_page *d_page, *next;
enum pool_type type;
bool is_cached = false;
unsigned count = 0, i, npages = 0;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
unsigned long irq_flags;
type = ttm_to_type(ttm->page_flags, ttm->caching_state);
pool = ttm_dma_find_pool(dev, type);
ttm/dma: Remove the WARN() which is not useful. . It was useful during development, but now on a production system we can get this (if the user forgot to upload the firmware): [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading SUMO Microcode r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin" atl1c 0000:03:00.0: version 1.0.1.0-NAPI.213057] [drm:evergreen_startup] *ERROR* Failed to load firmware! radeon 0000:00:01.0: disabling GPU acceleration 88] radeon 0000:00:01.0: ffff8801bb782400 unpin not necessary ------------[ cut here ]------------ WARNING: at /home/konrad/linux-linus/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:956 ttm_dma_unpopulate+0x79/0x300 [ttm]() Hardware name: System Product Name Modules linked in: e1000e atl1c radeon(+) ahci libahci libata scsi_mod fbcon tileblit font ttm bitblit softcursor drm_kms_helper wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd Pid: 1600, comm: modprobe Not tainted 3.2.0-06100-ge343a89 #1 Call Trace: [<ffffffff8108973a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff81089785>] warn_slowpath_null+0x15/0x20 [<ffffffffa0060309>] ttm_dma_unpopulate+0x79/0x300 [ttm] [<ffffffffa01341c0>] radeon_ttm_tt_unpopulate+0x120/0x130 [radeon] [<ffffffffa0056e0c>] ttm_tt_destroy+0x2c/0x70 [ttm] [<ffffffffa0057a4e>] ttm_bo_cleanup_memtype_use+0x3e/0x80 [ttm] [<ffffffffa00595a1>] ttm_bo_release+0x251/0x280 [ttm] [<ffffffffa0059610>] ttm_bo_unref+0x40/0x60 [ttm] [<ffffffffa0134d02>] radeon_bo_unref+0x42/0x80 [radeon] [<ffffffffa0186dfb>] radeon_sa_bo_manager_fini+0x6b/0x80 [radeon] [<ffffffffa0146b8f>] radeon_ib_pool_fini+0x6f/0x90 [radeon] [<ffffffffa014be49>] r100_ib_fini+0x19/0x20 [radeon] [<ffffffffa017b47e>] evergreen_init+0x1ee/0x2d0 [radeon] The big WARN() has nothing to do with the culprit - which is that the firmware was not loaded. So lets remove the WARN() from the TTM DMA code. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13 00:50:26 +08:00
if (!pool)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
return;
ttm/dma: Remove the WARN() which is not useful. . It was useful during development, but now on a production system we can get this (if the user forgot to upload the firmware): [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading SUMO Microcode r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin" atl1c 0000:03:00.0: version 1.0.1.0-NAPI.213057] [drm:evergreen_startup] *ERROR* Failed to load firmware! radeon 0000:00:01.0: disabling GPU acceleration 88] radeon 0000:00:01.0: ffff8801bb782400 unpin not necessary ------------[ cut here ]------------ WARNING: at /home/konrad/linux-linus/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:956 ttm_dma_unpopulate+0x79/0x300 [ttm]() Hardware name: System Product Name Modules linked in: e1000e atl1c radeon(+) ahci libahci libata scsi_mod fbcon tileblit font ttm bitblit softcursor drm_kms_helper wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd Pid: 1600, comm: modprobe Not tainted 3.2.0-06100-ge343a89 #1 Call Trace: [<ffffffff8108973a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff81089785>] warn_slowpath_null+0x15/0x20 [<ffffffffa0060309>] ttm_dma_unpopulate+0x79/0x300 [ttm] [<ffffffffa01341c0>] radeon_ttm_tt_unpopulate+0x120/0x130 [radeon] [<ffffffffa0056e0c>] ttm_tt_destroy+0x2c/0x70 [ttm] [<ffffffffa0057a4e>] ttm_bo_cleanup_memtype_use+0x3e/0x80 [ttm] [<ffffffffa00595a1>] ttm_bo_release+0x251/0x280 [ttm] [<ffffffffa0059610>] ttm_bo_unref+0x40/0x60 [ttm] [<ffffffffa0134d02>] radeon_bo_unref+0x42/0x80 [radeon] [<ffffffffa0186dfb>] radeon_sa_bo_manager_fini+0x6b/0x80 [radeon] [<ffffffffa0146b8f>] radeon_ib_pool_fini+0x6f/0x90 [radeon] [<ffffffffa014be49>] r100_ib_fini+0x19/0x20 [radeon] [<ffffffffa017b47e>] evergreen_init+0x1ee/0x2d0 [radeon] The big WARN() has nothing to do with the culprit - which is that the firmware was not loaded. So lets remove the WARN() from the TTM DMA code. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13 00:50:26 +08:00
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
is_cached = (ttm_dma_find_pool(pool->dev,
ttm_to_type(ttm->page_flags, tt_cached)) == pool);
/* make sure pages array match list and count number of pages */
list_for_each_entry(d_page, &ttm_dma->pages_list, page_list) {
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
ttm->pages[count] = d_page->p;
count++;
}
spin_lock_irqsave(&pool->lock, irq_flags);
pool->npages_in_use -= count;
if (is_cached) {
pool->nfrees += count;
} else {
pool->npages_free += count;
list_splice(&ttm_dma->pages_list, &pool->free_list);
/*
* Wait to have at at least NUM_PAGES_TO_ALLOC number of pages
* to free in order to minimize calls to set_memory_wb().
*/
if (pool->npages_free >= (_manager->options.max_size +
NUM_PAGES_TO_ALLOC))
npages = pool->npages_free - _manager->options.max_size;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
}
spin_unlock_irqrestore(&pool->lock, irq_flags);
if (is_cached) {
list_for_each_entry_safe(d_page, next, &ttm_dma->pages_list, page_list) {
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
ttm_mem_global_free_page(ttm->glob->mem_glob,
d_page->p);
ttm_dma_page_put(pool, d_page);
}
} else {
for (i = 0; i < count; i++) {
ttm_mem_global_free_page(ttm->glob->mem_glob,
ttm->pages[i]);
}
}
INIT_LIST_HEAD(&ttm_dma->pages_list);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
for (i = 0; i < ttm->num_pages; i++) {
ttm->pages[i] = NULL;
ttm_dma->dma_address[i] = 0;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
}
/* shrink pool if necessary (only on !is_cached pools)*/
if (npages)
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
ttm_dma_page_pool_free(pool, npages, false);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
ttm->state = tt_unpopulated;
}
EXPORT_SYMBOL_GPL(ttm_dma_unpopulate);
/**
* Callback for mm to request pool to reduce number of page held.
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
*
* XXX: (dchinner) Deadlock warning!
*
* I'm getting sadder as I hear more pathetical whimpers about needing per-pool
* shrinkers
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
*/
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
static unsigned long
ttm_dma_pool_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
{
static unsigned start_pool;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
unsigned idx = 0;
unsigned pool_offset;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
unsigned shrink_pages = sc->nr_to_scan;
struct device_pools *p;
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
unsigned long freed = 0;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
if (list_empty(&_manager->pools))
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
return SHRINK_STOP;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
if (!mutex_trylock(&_manager->lock))
return SHRINK_STOP;
if (!_manager->npools)
goto out;
pool_offset = ++start_pool % _manager->npools;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
list_for_each_entry(p, &_manager->pools, pools) {
unsigned nr_free;
if (!p->dev)
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
continue;
if (shrink_pages == 0)
break;
/* Do it in round-robin fashion. */
if (++idx < pool_offset)
continue;
nr_free = shrink_pages;
drm/ttm: Avoid memory allocation from shrinker functions. Andrew Morton wrote: > On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote: > > > Andrew Morton wrote: > > > Poor ttm guys - this is a bit of a trap we set for them. > > > > Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") > > changed to use sc->gfp_mask rather than GFP_KERNEL. > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), > > - GFP_KERNEL); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > > > But this bug is caused by sc->gfp_mask containing some flags which are not > > in GFP_KERNEL, right? Then, I think > > > > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp); > > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL); > > > > would hide this bug. > > > > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag) > > Well no - ttm_page_pool_free() should stop calling kmalloc altogether. > Just do > > struct page *pages_to_free[16]; > > and rework the code to free 16 pages at a time. Easy. Well, ttm code wants to process 512 pages at a time for performance. Memory footprint increased by 512 * sizeof(struct page *) buffer is only 4096 bytes. What about using static buffer like below? ---------- >From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Thu, 13 Nov 2014 22:21:54 +0900 Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions. Commit a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags which are not in GFP_KERNEL. https://bugzilla.kernel.org/show_bug.cgi?id=87891 Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would avoid the BUG_ON(), but avoiding memory allocation from shrinker function is better and reliable fix. Shrinker function is already serialized by global lock, and clean up function is called after shrinker function is unregistered. Thus, we can use static buffer when called from shrinker function and clean up function. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-13 21:43:23 +08:00
/* OK to use static buffer since global mutex is held. */
shrink_pages = ttm_dma_page_pool_free(p->pool, nr_free, true);
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
freed += nr_free - shrink_pages;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
pr_debug("%s: (%s:%d) Asked to shrink %d, have %d more to go\n",
p->pool->dev_name, p->pool->name, current->pid,
nr_free, shrink_pages);
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
}
out:
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
mutex_unlock(&_manager->lock);
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
return freed;
}
static unsigned long
ttm_dma_pool_shrink_count(struct shrinker *shrink, struct shrink_control *sc)
{
struct device_pools *p;
unsigned long count = 0;
if (!mutex_trylock(&_manager->lock))
return 0;
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
list_for_each_entry(p, &_manager->pools, pools)
count += p->pool->npages_free;
mutex_unlock(&_manager->lock);
return count;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
}
static void ttm_dma_pool_mm_shrink_init(struct ttm_pool_manager *manager)
{
drivers: convert shrinkers to new count/scan API Convert the driver shrinkers to the new API. Most changes are compile tested only because I either don't have the hardware or it's staging stuff. FWIW, the md and android code is pretty good, but the rest of it makes me want to claw my eyes out. The amount of broken code I just encountered is mind boggling. I've added comments explaining what is broken, but I fear that some of the code would be best dealt with by being dragged behind the bike shed, burying in mud up to it's neck and then run over repeatedly with a blunt lawn mower. Special mention goes to the zcache/zcache2 drivers. They can't co-exist in the build at the same time, they are under different menu options in menuconfig, they only show up when you've got the right set of mm subsystem options configured and so even compile testing is an exercise in pulling teeth. And that doesn't even take into account the horrible, broken code... [glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kent Overstreet <koverstreet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: David Rientjes <rientjes@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:11 +08:00
manager->mm_shrink.count_objects = ttm_dma_pool_shrink_count;
manager->mm_shrink.scan_objects = &ttm_dma_pool_shrink_scan;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
manager->mm_shrink.seeks = 1;
register_shrinker(&manager->mm_shrink);
}
static void ttm_dma_pool_mm_shrink_fini(struct ttm_pool_manager *manager)
{
unregister_shrinker(&manager->mm_shrink);
}
int ttm_dma_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages)
{
int ret = -ENOMEM;
WARN_ON(_manager);
pr_info("Initializing DMA pool allocator\n");
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
_manager = kzalloc(sizeof(*_manager), GFP_KERNEL);
if (!_manager)
goto err;
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
mutex_init(&_manager->lock);
INIT_LIST_HEAD(&_manager->pools);
_manager->options.max_size = max_pages;
_manager->options.small = SMALL_ALLOCATION;
_manager->options.alloc_size = NUM_PAGES_TO_ALLOC;
/* This takes care of auto-freeing the _manager */
ret = kobject_init_and_add(&_manager->kobj, &ttm_pool_kobj_type,
&glob->kobj, "dma_pool");
if (unlikely(ret != 0)) {
kobject_put(&_manager->kobj);
goto err;
}
ttm_dma_pool_mm_shrink_init(_manager);
return 0;
err:
return ret;
}
void ttm_dma_page_alloc_fini(void)
{
struct device_pools *p, *t;
pr_info("Finalizing DMA pool allocator\n");
drm/ttm: provide dma aware ttm page pool code V9 In TTM world the pages for the graphic drivers are kept in three different pools: write combined, uncached, and cached (write-back). When the pages are used by the graphic driver the graphic adapter via its built in MMU (or AGP) programs these pages in. The programming requires the virtual address (from the graphic adapter perspective) and the physical address (either System RAM or the memory on the card) which is obtained using the pci_map_* calls (which does the virtual to physical - or bus address translation). During the graphic application's "life" those pages can be shuffled around, swapped out to disk, moved from the VRAM to System RAM or vice-versa. This all works with the existing TTM pool code - except when we want to use the software IOTLB (SWIOTLB) code to "map" the physical addresses to the graphic adapter MMU. We end up programming the bounce buffer's physical address instead of the TTM pool memory's and get a non-worky driver. There are two solutions: 1) using the DMA API to allocate pages that are screened by the DMA API, or 2) using the pci_sync_* calls to copy the pages from the bounce-buffer and back. This patch fixes the issue by allocating pages using the DMA API. The second is a viable option - but it has performance drawbacks and potential correctness issues - think of the write cache page being bounced (SWIOTLB->TTM), the WC is set on the TTM page and the copy from SWIOTLB not making it to the TTM page until the page has been recycled in the pool (and used by another application). The bounce buffer does not get activated often - only in cases where we have a 32-bit capable card and we want to use a page that is allocated above the 4GB limit. The bounce buffer offers the solution of copying the contents of that 4GB page to an location below 4GB and then back when the operation has been completed (or vice-versa). This is done by using the 'pci_sync_*' calls. Note: If you look carefully enough in the existing TTM page pool code you will notice the GFP_DMA32 flag is used - which should guarantee that the provided page is under 4GB. It certainly is the case, except this gets ignored in two cases: - If user specifies 'swiotlb=force' which bounces _every_ page. - If user is using a Xen's PV Linux guest (which uses the SWIOTLB and the underlaying PFN's aren't necessarily under 4GB). To not have this extra copying done the other option is to allocate the pages using the DMA API so that there is not need to map the page and perform the expensive 'pci_sync_*' calls. This DMA API capable TTM pool requires for this the 'struct device' to properly call the DMA API. It also has to track the virtual and bus address of the page being handed out in case it ends up being swapped out or de-allocated - to make sure it is de-allocated using the proper's 'struct device'. Implementation wise the code keeps two lists: one that is attached to the 'struct device' (via the dev->dma_pools list) and a global one to be used when the 'struct device' is unavailable (think shrinker code). The global list can iterate over all of the 'struct device' and its associated dma_pool. The list in dev->dma_pools can only iterate the device's dma_pool. /[struct device_pool]\ /---------------------------------------------------| dev | / +-------| dma_pool | /-----+------\ / \--------------------/ |struct device| /-->[struct dma_pool for WC]</ /[struct device_pool]\ | dma_pools +----+ /-| dev | | ... | \--->[struct dma_pool for uncached]<-/--| dma_pool | \-----+------/ / \--------------------/ \----------------------------------------------/ [Two pools associated with the device (WC and UC), and the parallel list containing the 'struct dev' and 'struct dma_pool' entries] The maximum amount of dma pools a device can have is six: write-combined, uncached, and cached; then there are the DMA32 variants which are: write-combined dma32, uncached dma32, and cached dma32. Currently this code only gets activated when any variant of the SWIOTLB IOMMU code is running (Intel without VT-d, AMD without GART, IBM Calgary and Xen PV with PCI devices). Tested-by: Michel Dänzer <michel@daenzer.net> [v1: Using swiotlb_nr_tbl instead of swiotlb_enabled] [v2: Major overhaul - added 'inuse_list' to seperate used from inuse and reorder the order of lists to get better performance.] [v3: Added comments/and some logic based on review, Added Jerome tag] [v4: rebase on top of ttm_tt & ttm_backend merge] [v5: rebase on top of ttm memory accounting overhaul] [v6: New rebase on top of more memory accouting changes] [v7: well rebase on top of no memory accounting changes] [v8: make sure pages list is initialized empty] [v9: calll ttm_mem_global_free_page in unpopulate for accurate accountg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2011-11-04 04:46:34 +08:00
ttm_dma_pool_mm_shrink_fini(_manager);
list_for_each_entry_safe_reverse(p, t, &_manager->pools, pools) {
dev_dbg(p->dev, "(%s:%d) Freeing.\n", p->pool->name,
current->pid);
WARN_ON(devres_destroy(p->dev, ttm_dma_pool_release,
ttm_dma_pool_match, p->pool));
ttm_dma_free_pool(p->dev, p->pool->type);
}
kobject_put(&_manager->kobj);
_manager = NULL;
}
int ttm_dma_page_alloc_debugfs(struct seq_file *m, void *data)
{
struct device_pools *p;
struct dma_pool *pool = NULL;
char *h[] = {"pool", "refills", "pages freed", "inuse", "available",
"name", "virt", "busaddr"};
if (!_manager) {
seq_printf(m, "No pool allocator running.\n");
return 0;
}
seq_printf(m, "%13s %12s %13s %8s %8s %8s\n",
h[0], h[1], h[2], h[3], h[4], h[5]);
mutex_lock(&_manager->lock);
list_for_each_entry(p, &_manager->pools, pools) {
struct device *dev = p->dev;
if (!dev)
continue;
pool = p->pool;
seq_printf(m, "%13s %12ld %13ld %8d %8d %8s\n",
pool->name, pool->nrefills,
pool->nfrees, pool->npages_in_use,
pool->npages_free,
pool->dev_name);
}
mutex_unlock(&_manager->lock);
return 0;
}
EXPORT_SYMBOL_GPL(ttm_dma_page_alloc_debugfs);
#endif