OpenCloudOS-Kernel/drivers/infiniband/hw/cxgb4/qp.c

1786 lines
48 KiB
C
Raw Normal View History

/*
* Copyright (c) 2009-2010 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include "iw_cxgb4.h"
static int db_delay_usecs = 1;
module_param(db_delay_usecs, int, 0644);
MODULE_PARM_DESC(db_delay_usecs, "Usecs to delay awaiting db fifo to drain");
static int ocqp_support = 1;
module_param(ocqp_support, int, 0644);
MODULE_PARM_DESC(ocqp_support, "Support on-chip SQs (default=1)");
int db_fc_threshold = 1000;
module_param(db_fc_threshold, int, 0644);
MODULE_PARM_DESC(db_fc_threshold,
"QP count/threshold that triggers"
" automatic db flow control mode (default = 1000)");
int db_coalescing_threshold;
module_param(db_coalescing_threshold, int, 0644);
MODULE_PARM_DESC(db_coalescing_threshold,
"QP count/threshold that triggers"
" disabling db coalescing (default = 0)");
static int max_fr_immd = T4_MAX_FR_IMMD;
module_param(max_fr_immd, int, 0644);
MODULE_PARM_DESC(max_fr_immd, "fastreg threshold for using DSGL instead of immedate");
static void set_state(struct c4iw_qp *qhp, enum c4iw_qp_state state)
{
unsigned long flag;
spin_lock_irqsave(&qhp->lock, flag);
qhp->attr.state = state;
spin_unlock_irqrestore(&qhp->lock, flag);
}
static void dealloc_oc_sq(struct c4iw_rdev *rdev, struct t4_sq *sq)
{
c4iw_ocqp_pool_free(rdev, sq->dma_addr, sq->memsize);
}
static void dealloc_host_sq(struct c4iw_rdev *rdev, struct t4_sq *sq)
{
dma_free_coherent(&(rdev->lldi.pdev->dev), sq->memsize, sq->queue,
pci_unmap_addr(sq, mapping));
}
static void dealloc_sq(struct c4iw_rdev *rdev, struct t4_sq *sq)
{
if (t4_sq_onchip(sq))
dealloc_oc_sq(rdev, sq);
else
dealloc_host_sq(rdev, sq);
}
static int alloc_oc_sq(struct c4iw_rdev *rdev, struct t4_sq *sq)
{
if (!ocqp_support || !ocqp_supported(&rdev->lldi))
return -ENOSYS;
sq->dma_addr = c4iw_ocqp_pool_alloc(rdev, sq->memsize);
if (!sq->dma_addr)
return -ENOMEM;
sq->phys_addr = rdev->oc_mw_pa + sq->dma_addr -
rdev->lldi.vr->ocq.start;
sq->queue = (__force union t4_wr *)(rdev->oc_mw_kva + sq->dma_addr -
rdev->lldi.vr->ocq.start);
sq->flags |= T4_SQ_ONCHIP;
return 0;
}
static int alloc_host_sq(struct c4iw_rdev *rdev, struct t4_sq *sq)
{
sq->queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev), sq->memsize,
&(sq->dma_addr), GFP_KERNEL);
if (!sq->queue)
return -ENOMEM;
sq->phys_addr = virt_to_phys(sq->queue);
pci_unmap_addr_set(sq, mapping, sq->dma_addr);
return 0;
}
RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled Commit c079c28714e4 ("RDMA/cxgb4: Fix error handling in create_qp()") broke SQ allocation. Instead of falling back to host allocation when on-chip allocation fails, it tries to allocate both. And when it does, and we try to free the address from the genpool using the host address, we hit a BUG and the system crashes as below. We create a new function that has the previous behavior and properly propagate the error, as intended. kernel BUG at /usr/src/packages/BUILD/kernel-ppc64-3.0.68/linux-3.0/lib/genalloc.c:340! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: rdma_ucm rdma_cm ib_addr ib_cm iw_cm ib_sa ib_mad ib_uverbs iw_cxgb4 ib_core ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod ipv6 ipv6_lib sr_mod cdrom ibmveth(X) cxgb4 sg ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh ibmvscsic(X) scsi_transport_srp scsi_tgt scsi_mod Supported: Yes NIP: c00000000037d41c LR: d000000003913824 CTR: c00000000037d3b0 REGS: c0000001f350ae50 TRAP: 0700 Tainted: G X (3.0.68-0.9-ppc64) MSR: 8000000000029032 <EE,ME,CE,IR,DR> CR: 24042482 XER: 00000001 TASK = c0000001f6f2a840[3616] 'rping' THREAD: c0000001f3508000 CPU: 0 GPR00: c0000001f6e875c8 c0000001f350b0d0 c000000000fc9690 c0000001f6e875c0 GPR04: 00000000000c0000 0000000000010000 0000000000000000 c0000000009d482a GPR08: 000000006a170000 0000000000100000 c0000001f350b140 c0000001f6e875c8 GPR12: d000000003915dd0 c000000003f40000 000000003e3ecfa8 c0000001f350bea0 GPR16: c0000001f350bcd0 00000000003c0000 0000000000040100 c0000001f6e74a80 GPR20: d00000000399a898 c0000001f6e74ac8 c0000001fad91600 c0000001f6e74ab0 GPR24: c0000001f7d23f80 0000000000000000 0000000000000002 000000006a170000 GPR28: 000000000000000c c0000001f584c8d0 d000000003925180 c0000001f6e875c8 NIP [c00000000037d41c] .gen_pool_free+0x6c/0xf8 LR [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] Call Trace: [c0000001f350b0d0] [c0000001f350b180] 0xc0000001f350b180 (unreliable) [c0000001f350b170] [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] [c0000001f350b210] [d00000000390fd70] .dealloc_sq+0x90/0xb0 [iw_cxgb4] [c0000001f350b280] [d00000000390fe08] .destroy_qp+0x78/0xf8 [iw_cxgb4] [c0000001f350b310] [d000000003912738] .c4iw_destroy_qp+0x208/0x2d0 [iw_cxgb4] [c0000001f350b460] [d000000003861874] .ib_destroy_qp+0x5c/0x130 [ib_core] [c0000001f350b510] [d0000000039911bc] .ib_uverbs_cleanup_ucontext+0x174/0x4f8 [ib_uverbs] [c0000001f350b5f0] [d000000003991568] .ib_uverbs_close+0x28/0x70 [ib_uverbs] [c0000001f350b670] [c0000000001e7b2c] .__fput+0xdc/0x278 [c0000001f350b720] [c0000000001a9590] .remove_vma+0x68/0xd8 [c0000001f350b7b0] [c0000000001a9720] .exit_mmap+0x120/0x160 [c0000001f350b8d0] [c0000000000af330] .mmput+0x80/0x160 [c0000001f350b960] [c0000000000b5d0c] .exit_mm+0x1ac/0x1e8 [c0000001f350ba10] [c0000000000b8154] .do_exit+0x1b4/0x4b8 [c0000001f350bad0] [c0000000000b84b0] .do_group_exit+0x58/0xf8 [c0000001f350bb60] [c0000000000ce9f4] .get_signal_to_deliver+0x2f4/0x5d0 [c0000001f350bc60] [c000000000017ee4] .do_signal_pending+0x6c/0x3e0 [c0000001f350bdb0] [c0000000000182cc] .do_signal+0x74/0x78 [c0000001f350be30] [c000000000009e74] do_work+0x24/0x28 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Emil Goode <emilgoode@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-02 04:13:39 +08:00
static int alloc_sq(struct c4iw_rdev *rdev, struct t4_sq *sq, int user)
{
int ret = -ENOSYS;
if (user)
ret = alloc_oc_sq(rdev, sq);
if (ret)
ret = alloc_host_sq(rdev, sq);
return ret;
}
static int destroy_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
struct c4iw_dev_ucontext *uctx)
{
/*
* uP clears EQ contexts when the connection exits rdma mode,
* so no need to post a RESET WR for these EQs.
*/
dma_free_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, wq->rq.queue,
dma_unmap_addr(&wq->rq, mapping));
dealloc_sq(rdev, &wq->sq);
c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
kfree(wq->rq.sw_rq);
kfree(wq->sq.sw_sq);
c4iw_put_qpid(rdev, wq->rq.qid, uctx);
c4iw_put_qpid(rdev, wq->sq.qid, uctx);
return 0;
}
static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
struct t4_cq *rcq, struct t4_cq *scq,
struct c4iw_dev_ucontext *uctx)
{
int user = (uctx != &rdev->uctx);
struct fw_ri_res_wr *res_wr;
struct fw_ri_res *res;
int wr_len;
struct c4iw_wr_wait wr_wait;
struct sk_buff *skb;
int ret = 0;
int eqsize;
wq->sq.qid = c4iw_get_qpid(rdev, uctx);
if (!wq->sq.qid)
return -ENOMEM;
wq->rq.qid = c4iw_get_qpid(rdev, uctx);
if (!wq->rq.qid) {
ret = -ENOMEM;
goto free_sq_qid;
}
if (!user) {
wq->sq.sw_sq = kzalloc(wq->sq.size * sizeof *wq->sq.sw_sq,
GFP_KERNEL);
if (!wq->sq.sw_sq) {
ret = -ENOMEM;
goto free_rq_qid;
}
wq->rq.sw_rq = kzalloc(wq->rq.size * sizeof *wq->rq.sw_rq,
GFP_KERNEL);
if (!wq->rq.sw_rq) {
ret = -ENOMEM;
goto free_sw_sq;
}
}
/*
* RQT must be a power of 2.
*/
wq->rq.rqt_size = roundup_pow_of_two(wq->rq.size);
wq->rq.rqt_hwaddr = c4iw_rqtpool_alloc(rdev, wq->rq.rqt_size);
if (!wq->rq.rqt_hwaddr) {
ret = -ENOMEM;
goto free_sw_rq;
}
RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled Commit c079c28714e4 ("RDMA/cxgb4: Fix error handling in create_qp()") broke SQ allocation. Instead of falling back to host allocation when on-chip allocation fails, it tries to allocate both. And when it does, and we try to free the address from the genpool using the host address, we hit a BUG and the system crashes as below. We create a new function that has the previous behavior and properly propagate the error, as intended. kernel BUG at /usr/src/packages/BUILD/kernel-ppc64-3.0.68/linux-3.0/lib/genalloc.c:340! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: rdma_ucm rdma_cm ib_addr ib_cm iw_cm ib_sa ib_mad ib_uverbs iw_cxgb4 ib_core ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod ipv6 ipv6_lib sr_mod cdrom ibmveth(X) cxgb4 sg ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh ibmvscsic(X) scsi_transport_srp scsi_tgt scsi_mod Supported: Yes NIP: c00000000037d41c LR: d000000003913824 CTR: c00000000037d3b0 REGS: c0000001f350ae50 TRAP: 0700 Tainted: G X (3.0.68-0.9-ppc64) MSR: 8000000000029032 <EE,ME,CE,IR,DR> CR: 24042482 XER: 00000001 TASK = c0000001f6f2a840[3616] 'rping' THREAD: c0000001f3508000 CPU: 0 GPR00: c0000001f6e875c8 c0000001f350b0d0 c000000000fc9690 c0000001f6e875c0 GPR04: 00000000000c0000 0000000000010000 0000000000000000 c0000000009d482a GPR08: 000000006a170000 0000000000100000 c0000001f350b140 c0000001f6e875c8 GPR12: d000000003915dd0 c000000003f40000 000000003e3ecfa8 c0000001f350bea0 GPR16: c0000001f350bcd0 00000000003c0000 0000000000040100 c0000001f6e74a80 GPR20: d00000000399a898 c0000001f6e74ac8 c0000001fad91600 c0000001f6e74ab0 GPR24: c0000001f7d23f80 0000000000000000 0000000000000002 000000006a170000 GPR28: 000000000000000c c0000001f584c8d0 d000000003925180 c0000001f6e875c8 NIP [c00000000037d41c] .gen_pool_free+0x6c/0xf8 LR [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] Call Trace: [c0000001f350b0d0] [c0000001f350b180] 0xc0000001f350b180 (unreliable) [c0000001f350b170] [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] [c0000001f350b210] [d00000000390fd70] .dealloc_sq+0x90/0xb0 [iw_cxgb4] [c0000001f350b280] [d00000000390fe08] .destroy_qp+0x78/0xf8 [iw_cxgb4] [c0000001f350b310] [d000000003912738] .c4iw_destroy_qp+0x208/0x2d0 [iw_cxgb4] [c0000001f350b460] [d000000003861874] .ib_destroy_qp+0x5c/0x130 [ib_core] [c0000001f350b510] [d0000000039911bc] .ib_uverbs_cleanup_ucontext+0x174/0x4f8 [ib_uverbs] [c0000001f350b5f0] [d000000003991568] .ib_uverbs_close+0x28/0x70 [ib_uverbs] [c0000001f350b670] [c0000000001e7b2c] .__fput+0xdc/0x278 [c0000001f350b720] [c0000000001a9590] .remove_vma+0x68/0xd8 [c0000001f350b7b0] [c0000000001a9720] .exit_mmap+0x120/0x160 [c0000001f350b8d0] [c0000000000af330] .mmput+0x80/0x160 [c0000001f350b960] [c0000000000b5d0c] .exit_mm+0x1ac/0x1e8 [c0000001f350ba10] [c0000000000b8154] .do_exit+0x1b4/0x4b8 [c0000001f350bad0] [c0000000000b84b0] .do_group_exit+0x58/0xf8 [c0000001f350bb60] [c0000000000ce9f4] .get_signal_to_deliver+0x2f4/0x5d0 [c0000001f350bc60] [c000000000017ee4] .do_signal_pending+0x6c/0x3e0 [c0000001f350bdb0] [c0000000000182cc] .do_signal+0x74/0x78 [c0000001f350be30] [c000000000009e74] do_work+0x24/0x28 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Emil Goode <emilgoode@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-02 04:13:39 +08:00
ret = alloc_sq(rdev, &wq->sq, user);
if (ret)
goto free_hwaddr;
memset(wq->sq.queue, 0, wq->sq.memsize);
dma_unmap_addr_set(&wq->sq, mapping, wq->sq.dma_addr);
wq->rq.queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, &(wq->rq.dma_addr),
GFP_KERNEL);
if (!wq->rq.queue) {
ret = -ENOMEM;
goto free_sq;
}
PDBG("%s sq base va 0x%p pa 0x%llx rq base va 0x%p pa 0x%llx\n",
__func__, wq->sq.queue,
(unsigned long long)virt_to_phys(wq->sq.queue),
wq->rq.queue,
(unsigned long long)virt_to_phys(wq->rq.queue));
memset(wq->rq.queue, 0, wq->rq.memsize);
dma_unmap_addr_set(&wq->rq, mapping, wq->rq.dma_addr);
wq->db = rdev->lldi.db_reg;
wq->gts = rdev->lldi.gts_reg;
if (user) {
wq->sq.udb = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
(wq->sq.qid << rdev->qpshift);
wq->sq.udb &= PAGE_MASK;
wq->rq.udb = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
(wq->rq.qid << rdev->qpshift);
wq->rq.udb &= PAGE_MASK;
}
wq->rdev = rdev;
wq->rq.msn = 1;
/* build fw_ri_res_wr */
wr_len = sizeof *res_wr + 2 * sizeof *res;
skb = alloc_skb(wr_len, GFP_KERNEL);
if (!skb) {
ret = -ENOMEM;
goto free_dma;
}
set_wr_txq(skb, CPL_PRIORITY_CONTROL, 0);
res_wr = (struct fw_ri_res_wr *)__skb_put(skb, wr_len);
memset(res_wr, 0, wr_len);
res_wr->op_nres = cpu_to_be32(
FW_WR_OP(FW_RI_RES_WR) |
V_FW_RI_RES_WR_NRES(2) |
FW_WR_COMPL(1));
res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16));
res_wr->cookie = (unsigned long) &wr_wait;
res = res_wr->res;
res->u.sqrq.restype = FW_RI_RES_TYPE_SQ;
res->u.sqrq.op = FW_RI_RES_OP_WRITE;
/*
* eqsize is the number of 64B entries plus the status page size.
*/
eqsize = wq->sq.size * T4_SQ_NUM_SLOTS + T4_EQ_STATUS_ENTRIES;
res->u.sqrq.fetchszm_to_iqid = cpu_to_be32(
V_FW_RI_RES_WR_HOSTFCMODE(0) | /* no host cidx updates */
V_FW_RI_RES_WR_CPRIO(0) | /* don't keep in chip cache */
V_FW_RI_RES_WR_PCIECHN(0) | /* set by uP at ri_init time */
(t4_sq_onchip(&wq->sq) ? F_FW_RI_RES_WR_ONCHIP : 0) |
V_FW_RI_RES_WR_IQID(scq->cqid));
res->u.sqrq.dcaen_to_eqsize = cpu_to_be32(
V_FW_RI_RES_WR_DCAEN(0) |
V_FW_RI_RES_WR_DCACPU(0) |
V_FW_RI_RES_WR_FBMIN(2) |
V_FW_RI_RES_WR_FBMAX(2) |
V_FW_RI_RES_WR_CIDXFTHRESHO(0) |
V_FW_RI_RES_WR_CIDXFTHRESH(0) |
V_FW_RI_RES_WR_EQSIZE(eqsize));
res->u.sqrq.eqid = cpu_to_be32(wq->sq.qid);
res->u.sqrq.eqaddr = cpu_to_be64(wq->sq.dma_addr);
res++;
res->u.sqrq.restype = FW_RI_RES_TYPE_RQ;
res->u.sqrq.op = FW_RI_RES_OP_WRITE;
/*
* eqsize is the number of 64B entries plus the status page size.
*/
eqsize = wq->rq.size * T4_RQ_NUM_SLOTS + T4_EQ_STATUS_ENTRIES;
res->u.sqrq.fetchszm_to_iqid = cpu_to_be32(
V_FW_RI_RES_WR_HOSTFCMODE(0) | /* no host cidx updates */
V_FW_RI_RES_WR_CPRIO(0) | /* don't keep in chip cache */
V_FW_RI_RES_WR_PCIECHN(0) | /* set by uP at ri_init time */
V_FW_RI_RES_WR_IQID(rcq->cqid));
res->u.sqrq.dcaen_to_eqsize = cpu_to_be32(
V_FW_RI_RES_WR_DCAEN(0) |
V_FW_RI_RES_WR_DCACPU(0) |
V_FW_RI_RES_WR_FBMIN(2) |
V_FW_RI_RES_WR_FBMAX(2) |
V_FW_RI_RES_WR_CIDXFTHRESHO(0) |
V_FW_RI_RES_WR_CIDXFTHRESH(0) |
V_FW_RI_RES_WR_EQSIZE(eqsize));
res->u.sqrq.eqid = cpu_to_be32(wq->rq.qid);
res->u.sqrq.eqaddr = cpu_to_be64(wq->rq.dma_addr);
c4iw_init_wr_wait(&wr_wait);
ret = c4iw_ofld_send(rdev, skb);
if (ret)
goto free_dma;
ret = c4iw_wait_for_reply(rdev, &wr_wait, 0, wq->sq.qid, __func__);
if (ret)
goto free_dma;
PDBG("%s sqid 0x%x rqid 0x%x kdb 0x%p squdb 0x%llx rqudb 0x%llx\n",
__func__, wq->sq.qid, wq->rq.qid, wq->db,
(unsigned long long)wq->sq.udb, (unsigned long long)wq->rq.udb);
return 0;
free_dma:
dma_free_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, wq->rq.queue,
dma_unmap_addr(&wq->rq, mapping));
free_sq:
dealloc_sq(rdev, &wq->sq);
free_hwaddr:
c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
free_sw_rq:
kfree(wq->rq.sw_rq);
free_sw_sq:
kfree(wq->sq.sw_sq);
free_rq_qid:
c4iw_put_qpid(rdev, wq->rq.qid, uctx);
free_sq_qid:
c4iw_put_qpid(rdev, wq->sq.qid, uctx);
return ret;
}
static int build_immd(struct t4_sq *sq, struct fw_ri_immd *immdp,
struct ib_send_wr *wr, int max, u32 *plenp)
{
u8 *dstp, *srcp;
u32 plen = 0;
int i;
int rem, len;
dstp = (u8 *)immdp->data;
for (i = 0; i < wr->num_sge; i++) {
if ((plen + wr->sg_list[i].length) > max)
return -EMSGSIZE;
srcp = (u8 *)(unsigned long)wr->sg_list[i].addr;
plen += wr->sg_list[i].length;
rem = wr->sg_list[i].length;
while (rem) {
if (dstp == (u8 *)&sq->queue[sq->size])
dstp = (u8 *)sq->queue;
if (rem <= (u8 *)&sq->queue[sq->size] - dstp)
len = rem;
else
len = (u8 *)&sq->queue[sq->size] - dstp;
memcpy(dstp, srcp, len);
dstp += len;
srcp += len;
rem -= len;
}
}
len = roundup(plen + sizeof *immdp, 16) - (plen + sizeof *immdp);
if (len)
memset(dstp, 0, len);
immdp->op = FW_RI_DATA_IMMD;
immdp->r1 = 0;
immdp->r2 = 0;
immdp->immdlen = cpu_to_be32(plen);
*plenp = plen;
return 0;
}
static int build_isgl(__be64 *queue_start, __be64 *queue_end,
struct fw_ri_isgl *isglp, struct ib_sge *sg_list,
int num_sge, u32 *plenp)
{
int i;
u32 plen = 0;
__be64 *flitp = (__be64 *)isglp->sge;
for (i = 0; i < num_sge; i++) {
if ((plen + sg_list[i].length) < plen)
return -EMSGSIZE;
plen += sg_list[i].length;
*flitp = cpu_to_be64(((u64)sg_list[i].lkey << 32) |
sg_list[i].length);
if (++flitp == queue_end)
flitp = queue_start;
*flitp = cpu_to_be64(sg_list[i].addr);
if (++flitp == queue_end)
flitp = queue_start;
}
*flitp = (__force __be64)0;
isglp->op = FW_RI_DATA_ISGL;
isglp->r1 = 0;
isglp->nsge = cpu_to_be16(num_sge);
isglp->r2 = 0;
if (plenp)
*plenp = plen;
return 0;
}
static int build_rdma_send(struct t4_sq *sq, union t4_wr *wqe,
struct ib_send_wr *wr, u8 *len16)
{
u32 plen;
int size;
int ret;
if (wr->num_sge > T4_MAX_SEND_SGE)
return -EINVAL;
switch (wr->opcode) {
case IB_WR_SEND:
if (wr->send_flags & IB_SEND_SOLICITED)
wqe->send.sendop_pkd = cpu_to_be32(
V_FW_RI_SEND_WR_SENDOP(FW_RI_SEND_WITH_SE));
else
wqe->send.sendop_pkd = cpu_to_be32(
V_FW_RI_SEND_WR_SENDOP(FW_RI_SEND));
wqe->send.stag_inv = 0;
break;
case IB_WR_SEND_WITH_INV:
if (wr->send_flags & IB_SEND_SOLICITED)
wqe->send.sendop_pkd = cpu_to_be32(
V_FW_RI_SEND_WR_SENDOP(FW_RI_SEND_WITH_SE_INV));
else
wqe->send.sendop_pkd = cpu_to_be32(
V_FW_RI_SEND_WR_SENDOP(FW_RI_SEND_WITH_INV));
wqe->send.stag_inv = cpu_to_be32(wr->ex.invalidate_rkey);
break;
default:
return -EINVAL;
}
plen = 0;
if (wr->num_sge) {
if (wr->send_flags & IB_SEND_INLINE) {
ret = build_immd(sq, wqe->send.u.immd_src, wr,
T4_MAX_SEND_INLINE, &plen);
if (ret)
return ret;
size = sizeof wqe->send + sizeof(struct fw_ri_immd) +
plen;
} else {
ret = build_isgl((__be64 *)sq->queue,
(__be64 *)&sq->queue[sq->size],
wqe->send.u.isgl_src,
wr->sg_list, wr->num_sge, &plen);
if (ret)
return ret;
size = sizeof wqe->send + sizeof(struct fw_ri_isgl) +
wr->num_sge * sizeof(struct fw_ri_sge);
}
} else {
wqe->send.u.immd_src[0].op = FW_RI_DATA_IMMD;
wqe->send.u.immd_src[0].r1 = 0;
wqe->send.u.immd_src[0].r2 = 0;
wqe->send.u.immd_src[0].immdlen = 0;
size = sizeof wqe->send + sizeof(struct fw_ri_immd);
plen = 0;
}
*len16 = DIV_ROUND_UP(size, 16);
wqe->send.plen = cpu_to_be32(plen);
return 0;
}
static int build_rdma_write(struct t4_sq *sq, union t4_wr *wqe,
struct ib_send_wr *wr, u8 *len16)
{
u32 plen;
int size;
int ret;
if (wr->num_sge > T4_MAX_SEND_SGE)
return -EINVAL;
wqe->write.r2 = 0;
wqe->write.stag_sink = cpu_to_be32(wr->wr.rdma.rkey);
wqe->write.to_sink = cpu_to_be64(wr->wr.rdma.remote_addr);
if (wr->num_sge) {
if (wr->send_flags & IB_SEND_INLINE) {
ret = build_immd(sq, wqe->write.u.immd_src, wr,
T4_MAX_WRITE_INLINE, &plen);
if (ret)
return ret;
size = sizeof wqe->write + sizeof(struct fw_ri_immd) +
plen;
} else {
ret = build_isgl((__be64 *)sq->queue,
(__be64 *)&sq->queue[sq->size],
wqe->write.u.isgl_src,
wr->sg_list, wr->num_sge, &plen);
if (ret)
return ret;
size = sizeof wqe->write + sizeof(struct fw_ri_isgl) +
wr->num_sge * sizeof(struct fw_ri_sge);
}
} else {
wqe->write.u.immd_src[0].op = FW_RI_DATA_IMMD;
wqe->write.u.immd_src[0].r1 = 0;
wqe->write.u.immd_src[0].r2 = 0;
wqe->write.u.immd_src[0].immdlen = 0;
size = sizeof wqe->write + sizeof(struct fw_ri_immd);
plen = 0;
}
*len16 = DIV_ROUND_UP(size, 16);
wqe->write.plen = cpu_to_be32(plen);
return 0;
}
static int build_rdma_read(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16)
{
if (wr->num_sge > 1)
return -EINVAL;
if (wr->num_sge) {
wqe->read.stag_src = cpu_to_be32(wr->wr.rdma.rkey);
wqe->read.to_src_hi = cpu_to_be32((u32)(wr->wr.rdma.remote_addr
>> 32));
wqe->read.to_src_lo = cpu_to_be32((u32)wr->wr.rdma.remote_addr);
wqe->read.stag_sink = cpu_to_be32(wr->sg_list[0].lkey);
wqe->read.plen = cpu_to_be32(wr->sg_list[0].length);
wqe->read.to_sink_hi = cpu_to_be32((u32)(wr->sg_list[0].addr
>> 32));
wqe->read.to_sink_lo = cpu_to_be32((u32)(wr->sg_list[0].addr));
} else {
wqe->read.stag_src = cpu_to_be32(2);
wqe->read.to_src_hi = 0;
wqe->read.to_src_lo = 0;
wqe->read.stag_sink = cpu_to_be32(2);
wqe->read.plen = 0;
wqe->read.to_sink_hi = 0;
wqe->read.to_sink_lo = 0;
}
wqe->read.r2 = 0;
wqe->read.r5 = 0;
*len16 = DIV_ROUND_UP(sizeof wqe->read, 16);
return 0;
}
static int build_rdma_recv(struct c4iw_qp *qhp, union t4_recv_wr *wqe,
struct ib_recv_wr *wr, u8 *len16)
{
int ret;
ret = build_isgl((__be64 *)qhp->wq.rq.queue,
(__be64 *)&qhp->wq.rq.queue[qhp->wq.rq.size],
&wqe->recv.isgl, wr->sg_list, wr->num_sge, NULL);
if (ret)
return ret;
*len16 = DIV_ROUND_UP(sizeof wqe->recv +
wr->num_sge * sizeof(struct fw_ri_sge), 16);
return 0;
}
static int build_fastreg(struct t4_sq *sq, union t4_wr *wqe,
struct ib_send_wr *wr, u8 *len16, u8 t5dev)
{
struct fw_ri_immd *imdp;
__be64 *p;
int i;
int pbllen = roundup(wr->wr.fast_reg.page_list_len * sizeof(u64), 32);
int rem;
if (wr->wr.fast_reg.page_list_len > T4_MAX_FR_DEPTH)
return -EINVAL;
wqe->fr.qpbinde_to_dcacpu = 0;
wqe->fr.pgsz_shift = wr->wr.fast_reg.page_shift - 12;
wqe->fr.addr_type = FW_RI_VA_BASED_TO;
wqe->fr.mem_perms = c4iw_ib_to_tpt_access(wr->wr.fast_reg.access_flags);
wqe->fr.len_hi = 0;
wqe->fr.len_lo = cpu_to_be32(wr->wr.fast_reg.length);
wqe->fr.stag = cpu_to_be32(wr->wr.fast_reg.rkey);
wqe->fr.va_hi = cpu_to_be32(wr->wr.fast_reg.iova_start >> 32);
wqe->fr.va_lo_fbo = cpu_to_be32(wr->wr.fast_reg.iova_start &
0xffffffff);
if (t5dev && use_dsgl && (pbllen > max_fr_immd)) {
struct c4iw_fr_page_list *c4pl =
to_c4iw_fr_page_list(wr->wr.fast_reg.page_list);
struct fw_ri_dsgl *sglp;
for (i = 0; i < wr->wr.fast_reg.page_list_len; i++) {
wr->wr.fast_reg.page_list->page_list[i] = (__force u64)
cpu_to_be64((u64)
wr->wr.fast_reg.page_list->page_list[i]);
}
sglp = (struct fw_ri_dsgl *)(&wqe->fr + 1);
sglp->op = FW_RI_DATA_DSGL;
sglp->r1 = 0;
sglp->nsge = cpu_to_be16(1);
sglp->addr0 = cpu_to_be64(c4pl->dma_addr);
sglp->len0 = cpu_to_be32(pbllen);
*len16 = DIV_ROUND_UP(sizeof(wqe->fr) + sizeof(*sglp), 16);
} else {
imdp = (struct fw_ri_immd *)(&wqe->fr + 1);
imdp->op = FW_RI_DATA_IMMD;
imdp->r1 = 0;
imdp->r2 = 0;
imdp->immdlen = cpu_to_be32(pbllen);
p = (__be64 *)(imdp + 1);
rem = pbllen;
for (i = 0; i < wr->wr.fast_reg.page_list_len; i++) {
*p = cpu_to_be64(
(u64)wr->wr.fast_reg.page_list->page_list[i]);
rem -= sizeof(*p);
if (++p == (__be64 *)&sq->queue[sq->size])
p = (__be64 *)sq->queue;
}
BUG_ON(rem < 0);
while (rem) {
*p = 0;
rem -= sizeof(*p);
if (++p == (__be64 *)&sq->queue[sq->size])
p = (__be64 *)sq->queue;
}
*len16 = DIV_ROUND_UP(sizeof(wqe->fr) + sizeof(*imdp)
+ pbllen, 16);
}
return 0;
}
static int build_inv_stag(union t4_wr *wqe, struct ib_send_wr *wr,
u8 *len16)
{
wqe->inv.stag_inv = cpu_to_be32(wr->ex.invalidate_rkey);
wqe->inv.r2 = 0;
*len16 = DIV_ROUND_UP(sizeof wqe->inv, 16);
return 0;
}
void c4iw_qp_add_ref(struct ib_qp *qp)
{
PDBG("%s ib_qp %p\n", __func__, qp);
atomic_inc(&(to_c4iw_qp(qp)->refcnt));
}
void c4iw_qp_rem_ref(struct ib_qp *qp)
{
PDBG("%s ib_qp %p\n", __func__, qp);
if (atomic_dec_and_test(&(to_c4iw_qp(qp)->refcnt)))
wake_up(&(to_c4iw_qp(qp)->wait));
}
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
static void add_to_fc_list(struct list_head *head, struct list_head *entry)
{
if (list_empty(entry))
list_add_tail(entry, head);
}
static int ring_kernel_sq_db(struct c4iw_qp *qhp, u16 inc)
{
unsigned long flags;
spin_lock_irqsave(&qhp->rhp->lock, flags);
spin_lock(&qhp->lock);
if (qhp->rhp->db_state == NORMAL) {
t4_ring_sq_db(&qhp->wq, inc);
} else {
add_to_fc_list(&qhp->rhp->db_fc_list, &qhp->db_fc_entry);
qhp->wq.sq.wq_pidx_inc += inc;
}
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&qhp->rhp->lock, flags);
return 0;
}
static int ring_kernel_rq_db(struct c4iw_qp *qhp, u16 inc)
{
unsigned long flags;
spin_lock_irqsave(&qhp->rhp->lock, flags);
spin_lock(&qhp->lock);
if (qhp->rhp->db_state == NORMAL) {
t4_ring_rq_db(&qhp->wq, inc);
} else {
add_to_fc_list(&qhp->rhp->db_fc_list, &qhp->db_fc_entry);
qhp->wq.rq.wq_pidx_inc += inc;
}
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&qhp->rhp->lock, flags);
return 0;
}
int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct ib_send_wr **bad_wr)
{
int err = 0;
u8 len16 = 0;
enum fw_wr_opcodes fw_opcode = 0;
enum fw_ri_wr_flags fw_flags;
struct c4iw_qp *qhp;
union t4_wr *wqe;
u32 num_wrs;
struct t4_swsqe *swsqe;
unsigned long flag;
u16 idx = 0;
qhp = to_c4iw_qp(ibqp);
spin_lock_irqsave(&qhp->lock, flag);
if (t4_wq_in_error(&qhp->wq)) {
spin_unlock_irqrestore(&qhp->lock, flag);
return -EINVAL;
}
num_wrs = t4_sq_avail(&qhp->wq);
if (num_wrs == 0) {
spin_unlock_irqrestore(&qhp->lock, flag);
return -ENOMEM;
}
while (wr) {
if (num_wrs == 0) {
err = -ENOMEM;
*bad_wr = wr;
break;
}
wqe = (union t4_wr *)((u8 *)qhp->wq.sq.queue +
qhp->wq.sq.wq_pidx * T4_EQ_ENTRY_SIZE);
fw_flags = 0;
if (wr->send_flags & IB_SEND_SOLICITED)
fw_flags |= FW_RI_SOLICITED_EVENT_FLAG;
if (wr->send_flags & IB_SEND_SIGNALED || qhp->sq_sig_all)
fw_flags |= FW_RI_COMPLETION_FLAG;
swsqe = &qhp->wq.sq.sw_sq[qhp->wq.sq.pidx];
switch (wr->opcode) {
case IB_WR_SEND_WITH_INV:
case IB_WR_SEND:
if (wr->send_flags & IB_SEND_FENCE)
fw_flags |= FW_RI_READ_FENCE_FLAG;
fw_opcode = FW_RI_SEND_WR;
if (wr->opcode == IB_WR_SEND)
swsqe->opcode = FW_RI_SEND;
else
swsqe->opcode = FW_RI_SEND_WITH_INV;
err = build_rdma_send(&qhp->wq.sq, wqe, wr, &len16);
break;
case IB_WR_RDMA_WRITE:
fw_opcode = FW_RI_RDMA_WRITE_WR;
swsqe->opcode = FW_RI_RDMA_WRITE;
err = build_rdma_write(&qhp->wq.sq, wqe, wr, &len16);
break;
case IB_WR_RDMA_READ:
case IB_WR_RDMA_READ_WITH_INV:
fw_opcode = FW_RI_RDMA_READ_WR;
swsqe->opcode = FW_RI_READ_REQ;
if (wr->opcode == IB_WR_RDMA_READ_WITH_INV)
fw_flags = FW_RI_RDMA_READ_INVALIDATE;
else
fw_flags = 0;
err = build_rdma_read(wqe, wr, &len16);
if (err)
break;
swsqe->read_len = wr->sg_list[0].length;
if (!qhp->wq.sq.oldest_read)
qhp->wq.sq.oldest_read = swsqe;
break;
case IB_WR_FAST_REG_MR:
fw_opcode = FW_RI_FR_NSMR_WR;
swsqe->opcode = FW_RI_FAST_REGISTER;
err = build_fastreg(&qhp->wq.sq, wqe, wr, &len16,
is_t5(
qhp->rhp->rdev.lldi.adapter_type) ?
1 : 0);
break;
case IB_WR_LOCAL_INV:
if (wr->send_flags & IB_SEND_FENCE)
fw_flags |= FW_RI_LOCAL_FENCE_FLAG;
fw_opcode = FW_RI_INV_LSTAG_WR;
swsqe->opcode = FW_RI_LOCAL_INV;
err = build_inv_stag(wqe, wr, &len16);
break;
default:
PDBG("%s post of type=%d TBD!\n", __func__,
wr->opcode);
err = -EINVAL;
}
if (err) {
*bad_wr = wr;
break;
}
swsqe->idx = qhp->wq.sq.pidx;
swsqe->complete = 0;
swsqe->signaled = (wr->send_flags & IB_SEND_SIGNALED) ||
qhp->sq_sig_all;
swsqe->flushed = 0;
swsqe->wr_id = wr->wr_id;
init_wr_hdr(wqe, qhp->wq.sq.pidx, fw_opcode, fw_flags, len16);
PDBG("%s cookie 0x%llx pidx 0x%x opcode 0x%x read_len %u\n",
__func__, (unsigned long long)wr->wr_id, qhp->wq.sq.pidx,
swsqe->opcode, swsqe->read_len);
wr = wr->next;
num_wrs--;
t4_sq_produce(&qhp->wq, len16);
idx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
}
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
if (!qhp->rhp->rdev.status_page->db_off) {
t4_ring_sq_db(&qhp->wq, idx);
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
spin_unlock_irqrestore(&qhp->lock, flag);
} else {
spin_unlock_irqrestore(&qhp->lock, flag);
ring_kernel_sq_db(qhp, idx);
}
return err;
}
int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
struct ib_recv_wr **bad_wr)
{
int err = 0;
struct c4iw_qp *qhp;
union t4_recv_wr *wqe;
u32 num_wrs;
u8 len16 = 0;
unsigned long flag;
u16 idx = 0;
qhp = to_c4iw_qp(ibqp);
spin_lock_irqsave(&qhp->lock, flag);
if (t4_wq_in_error(&qhp->wq)) {
spin_unlock_irqrestore(&qhp->lock, flag);
return -EINVAL;
}
num_wrs = t4_rq_avail(&qhp->wq);
if (num_wrs == 0) {
spin_unlock_irqrestore(&qhp->lock, flag);
return -ENOMEM;
}
while (wr) {
if (wr->num_sge > T4_MAX_RECV_SGE) {
err = -EINVAL;
*bad_wr = wr;
break;
}
wqe = (union t4_recv_wr *)((u8 *)qhp->wq.rq.queue +
qhp->wq.rq.wq_pidx *
T4_EQ_ENTRY_SIZE);
if (num_wrs)
err = build_rdma_recv(qhp, wqe, wr, &len16);
else
err = -ENOMEM;
if (err) {
*bad_wr = wr;
break;
}
qhp->wq.rq.sw_rq[qhp->wq.rq.pidx].wr_id = wr->wr_id;
wqe->recv.opcode = FW_RI_RECV_WR;
wqe->recv.r1 = 0;
wqe->recv.wrid = qhp->wq.rq.pidx;
wqe->recv.r2[0] = 0;
wqe->recv.r2[1] = 0;
wqe->recv.r2[2] = 0;
wqe->recv.len16 = len16;
PDBG("%s cookie 0x%llx pidx %u\n", __func__,
(unsigned long long) wr->wr_id, qhp->wq.rq.pidx);
t4_rq_produce(&qhp->wq, len16);
idx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
wr = wr->next;
num_wrs--;
}
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
if (!qhp->rhp->rdev.status_page->db_off) {
t4_ring_rq_db(&qhp->wq, idx);
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
spin_unlock_irqrestore(&qhp->lock, flag);
} else {
spin_unlock_irqrestore(&qhp->lock, flag);
ring_kernel_rq_db(qhp, idx);
}
return err;
}
int c4iw_bind_mw(struct ib_qp *qp, struct ib_mw *mw, struct ib_mw_bind *mw_bind)
{
return -ENOSYS;
}
static inline void build_term_codes(struct t4_cqe *err_cqe, u8 *layer_type,
u8 *ecode)
{
int status;
int tagged;
int opcode;
int rqtype;
int send_inv;
if (!err_cqe) {
*layer_type = LAYER_RDMAP|DDP_LOCAL_CATA;
*ecode = 0;
return;
}
status = CQE_STATUS(err_cqe);
opcode = CQE_OPCODE(err_cqe);
rqtype = RQ_TYPE(err_cqe);
send_inv = (opcode == FW_RI_SEND_WITH_INV) ||
(opcode == FW_RI_SEND_WITH_SE_INV);
tagged = (opcode == FW_RI_RDMA_WRITE) ||
(rqtype && (opcode == FW_RI_READ_RESP));
switch (status) {
case T4_ERR_STAG:
if (send_inv) {
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP;
*ecode = RDMAP_CANT_INV_STAG;
} else {
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT;
*ecode = RDMAP_INV_STAG;
}
break;
case T4_ERR_PDID:
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT;
if ((opcode == FW_RI_SEND_WITH_INV) ||
(opcode == FW_RI_SEND_WITH_SE_INV))
*ecode = RDMAP_CANT_INV_STAG;
else
*ecode = RDMAP_STAG_NOT_ASSOC;
break;
case T4_ERR_QPID:
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT;
*ecode = RDMAP_STAG_NOT_ASSOC;
break;
case T4_ERR_ACCESS:
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT;
*ecode = RDMAP_ACC_VIOL;
break;
case T4_ERR_WRAP:
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT;
*ecode = RDMAP_TO_WRAP;
break;
case T4_ERR_BOUND:
if (tagged) {
*layer_type = LAYER_DDP|DDP_TAGGED_ERR;
*ecode = DDPT_BASE_BOUNDS;
} else {
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT;
*ecode = RDMAP_BASE_BOUNDS;
}
break;
case T4_ERR_INVALIDATE_SHARED_MR:
case T4_ERR_INVALIDATE_MR_WITH_MW_BOUND:
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP;
*ecode = RDMAP_CANT_INV_STAG;
break;
case T4_ERR_ECC:
case T4_ERR_ECC_PSTAG:
case T4_ERR_INTERNAL_ERR:
*layer_type = LAYER_RDMAP|RDMAP_LOCAL_CATA;
*ecode = 0;
break;
case T4_ERR_OUT_OF_RQE:
*layer_type = LAYER_DDP|DDP_UNTAGGED_ERR;
*ecode = DDPU_INV_MSN_NOBUF;
break;
case T4_ERR_PBL_ADDR_BOUND:
*layer_type = LAYER_DDP|DDP_TAGGED_ERR;
*ecode = DDPT_BASE_BOUNDS;
break;
case T4_ERR_CRC:
*layer_type = LAYER_MPA|DDP_LLP;
*ecode = MPA_CRC_ERR;
break;
case T4_ERR_MARKER:
*layer_type = LAYER_MPA|DDP_LLP;
*ecode = MPA_MARKER_ERR;
break;
case T4_ERR_PDU_LEN_ERR:
*layer_type = LAYER_DDP|DDP_UNTAGGED_ERR;
*ecode = DDPU_MSG_TOOBIG;
break;
case T4_ERR_DDP_VERSION:
if (tagged) {
*layer_type = LAYER_DDP|DDP_TAGGED_ERR;
*ecode = DDPT_INV_VERS;
} else {
*layer_type = LAYER_DDP|DDP_UNTAGGED_ERR;
*ecode = DDPU_INV_VERS;
}
break;
case T4_ERR_RDMA_VERSION:
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP;
*ecode = RDMAP_INV_VERS;
break;
case T4_ERR_OPCODE:
*layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP;
*ecode = RDMAP_INV_OPCODE;
break;
case T4_ERR_DDP_QUEUE_NUM:
*layer_type = LAYER_DDP|DDP_UNTAGGED_ERR;
*ecode = DDPU_INV_QN;
break;
case T4_ERR_MSN:
case T4_ERR_MSN_GAP:
case T4_ERR_MSN_RANGE:
case T4_ERR_IRD_OVERFLOW:
*layer_type = LAYER_DDP|DDP_UNTAGGED_ERR;
*ecode = DDPU_INV_MSN_RANGE;
break;
case T4_ERR_TBIT:
*layer_type = LAYER_DDP|DDP_LOCAL_CATA;
*ecode = 0;
break;
case T4_ERR_MO:
*layer_type = LAYER_DDP|DDP_UNTAGGED_ERR;
*ecode = DDPU_INV_MO;
break;
default:
*layer_type = LAYER_RDMAP|DDP_LOCAL_CATA;
*ecode = 0;
break;
}
}
static void post_terminate(struct c4iw_qp *qhp, struct t4_cqe *err_cqe,
gfp_t gfp)
{
struct fw_ri_wr *wqe;
struct sk_buff *skb;
struct terminate_message *term;
PDBG("%s qhp %p qid 0x%x tid %u\n", __func__, qhp, qhp->wq.sq.qid,
qhp->ep->hwtid);
skb = alloc_skb(sizeof *wqe, gfp);
if (!skb)
return;
set_wr_txq(skb, CPL_PRIORITY_DATA, qhp->ep->txq_idx);
wqe = (struct fw_ri_wr *)__skb_put(skb, sizeof(*wqe));
memset(wqe, 0, sizeof *wqe);
wqe->op_compl = cpu_to_be32(FW_WR_OP(FW_RI_INIT_WR));
wqe->flowid_len16 = cpu_to_be32(
FW_WR_FLOWID(qhp->ep->hwtid) |
FW_WR_LEN16(DIV_ROUND_UP(sizeof *wqe, 16)));
wqe->u.terminate.type = FW_RI_TYPE_TERMINATE;
wqe->u.terminate.immdlen = cpu_to_be32(sizeof *term);
term = (struct terminate_message *)wqe->u.terminate.termmsg;
if (qhp->attr.layer_etype == (LAYER_MPA|DDP_LLP)) {
term->layer_etype = qhp->attr.layer_etype;
term->ecode = qhp->attr.ecode;
} else
build_term_codes(err_cqe, &term->layer_etype, &term->ecode);
c4iw_ofld_send(&qhp->rhp->rdev, skb);
}
/*
* Assumes qhp lock is held.
*/
static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
struct c4iw_cq *schp)
{
int count;
int flushed;
unsigned long flag;
PDBG("%s qhp %p rchp %p schp %p\n", __func__, qhp, rchp, schp);
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, flag);
spin_lock(&qhp->lock);
if (qhp->wq.flushed) {
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&rchp->lock, flag);
return;
}
qhp->wq.flushed = 1;
c4iw_flush_hw_cq(rchp);
c4iw_count_rcqes(&rchp->cq, &qhp->wq, &count);
flushed = c4iw_flush_rq(&qhp->wq, &rchp->cq, count);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&rchp->lock, flag);
if (flushed) {
spin_lock_irqsave(&rchp->comp_handler_lock, flag);
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
spin_unlock_irqrestore(&rchp->comp_handler_lock, flag);
}
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, flag);
spin_lock(&qhp->lock);
if (schp != rchp)
c4iw_flush_hw_cq(schp);
flushed = c4iw_flush_sq(qhp);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&schp->lock, flag);
if (flushed) {
spin_lock_irqsave(&schp->comp_handler_lock, flag);
(*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context);
spin_unlock_irqrestore(&schp->comp_handler_lock, flag);
}
}
static void flush_qp(struct c4iw_qp *qhp)
{
struct c4iw_cq *rchp, *schp;
unsigned long flag;
rchp = to_c4iw_cq(qhp->ibqp.recv_cq);
schp = to_c4iw_cq(qhp->ibqp.send_cq);
t4_set_wq_in_error(&qhp->wq);
if (qhp->ibqp.uobject) {
t4_set_cq_in_error(&rchp->cq);
spin_lock_irqsave(&rchp->comp_handler_lock, flag);
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
spin_unlock_irqrestore(&rchp->comp_handler_lock, flag);
if (schp != rchp) {
t4_set_cq_in_error(&schp->cq);
spin_lock_irqsave(&schp->comp_handler_lock, flag);
(*schp->ibcq.comp_handler)(&schp->ibcq,
schp->ibcq.cq_context);
spin_unlock_irqrestore(&schp->comp_handler_lock, flag);
}
return;
}
__flush_qp(qhp, rchp, schp);
}
static int rdma_fini(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
struct c4iw_ep *ep)
{
struct fw_ri_wr *wqe;
int ret;
struct sk_buff *skb;
PDBG("%s qhp %p qid 0x%x tid %u\n", __func__, qhp, qhp->wq.sq.qid,
ep->hwtid);
skb = alloc_skb(sizeof *wqe, GFP_KERNEL);
if (!skb)
return -ENOMEM;
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
wqe = (struct fw_ri_wr *)__skb_put(skb, sizeof(*wqe));
memset(wqe, 0, sizeof *wqe);
wqe->op_compl = cpu_to_be32(
FW_WR_OP(FW_RI_INIT_WR) |
FW_WR_COMPL(1));
wqe->flowid_len16 = cpu_to_be32(
FW_WR_FLOWID(ep->hwtid) |
FW_WR_LEN16(DIV_ROUND_UP(sizeof *wqe, 16)));
wqe->cookie = (unsigned long) &ep->com.wr_wait;
wqe->u.fini.type = FW_RI_TYPE_FINI;
ret = c4iw_ofld_send(&rhp->rdev, skb);
if (ret)
goto out;
ret = c4iw_wait_for_reply(&rhp->rdev, &ep->com.wr_wait, qhp->ep->hwtid,
qhp->wq.sq.qid, __func__);
out:
PDBG("%s ret %d\n", __func__, ret);
return ret;
}
static void build_rtr_msg(u8 p2p_type, struct fw_ri_init *init)
{
PDBG("%s p2p_type = %d\n", __func__, p2p_type);
memset(&init->u, 0, sizeof init->u);
switch (p2p_type) {
case FW_RI_INIT_P2PTYPE_RDMA_WRITE:
init->u.write.opcode = FW_RI_RDMA_WRITE_WR;
init->u.write.stag_sink = cpu_to_be32(1);
init->u.write.to_sink = cpu_to_be64(1);
init->u.write.u.immd_src[0].op = FW_RI_DATA_IMMD;
init->u.write.len16 = DIV_ROUND_UP(sizeof init->u.write +
sizeof(struct fw_ri_immd),
16);
break;
case FW_RI_INIT_P2PTYPE_READ_REQ:
init->u.write.opcode = FW_RI_RDMA_READ_WR;
init->u.read.stag_src = cpu_to_be32(1);
init->u.read.to_src_lo = cpu_to_be32(1);
init->u.read.stag_sink = cpu_to_be32(1);
init->u.read.to_sink_lo = cpu_to_be32(1);
init->u.read.len16 = DIV_ROUND_UP(sizeof init->u.read, 16);
break;
}
}
static int rdma_init(struct c4iw_dev *rhp, struct c4iw_qp *qhp)
{
struct fw_ri_wr *wqe;
int ret;
struct sk_buff *skb;
PDBG("%s qhp %p qid 0x%x tid %u\n", __func__, qhp, qhp->wq.sq.qid,
qhp->ep->hwtid);
skb = alloc_skb(sizeof *wqe, GFP_KERNEL);
if (!skb)
return -ENOMEM;
set_wr_txq(skb, CPL_PRIORITY_DATA, qhp->ep->txq_idx);
wqe = (struct fw_ri_wr *)__skb_put(skb, sizeof(*wqe));
memset(wqe, 0, sizeof *wqe);
wqe->op_compl = cpu_to_be32(
FW_WR_OP(FW_RI_INIT_WR) |
FW_WR_COMPL(1));
wqe->flowid_len16 = cpu_to_be32(
FW_WR_FLOWID(qhp->ep->hwtid) |
FW_WR_LEN16(DIV_ROUND_UP(sizeof *wqe, 16)));
wqe->cookie = (unsigned long) &qhp->ep->com.wr_wait;
wqe->u.init.type = FW_RI_TYPE_INIT;
wqe->u.init.mpareqbit_p2ptype =
V_FW_RI_WR_MPAREQBIT(qhp->attr.mpa_attr.initiator) |
V_FW_RI_WR_P2PTYPE(qhp->attr.mpa_attr.p2p_type);
wqe->u.init.mpa_attrs = FW_RI_MPA_IETF_ENABLE;
if (qhp->attr.mpa_attr.recv_marker_enabled)
wqe->u.init.mpa_attrs |= FW_RI_MPA_RX_MARKER_ENABLE;
if (qhp->attr.mpa_attr.xmit_marker_enabled)
wqe->u.init.mpa_attrs |= FW_RI_MPA_TX_MARKER_ENABLE;
if (qhp->attr.mpa_attr.crc_enabled)
wqe->u.init.mpa_attrs |= FW_RI_MPA_CRC_ENABLE;
wqe->u.init.qp_caps = FW_RI_QP_RDMA_READ_ENABLE |
FW_RI_QP_RDMA_WRITE_ENABLE |
FW_RI_QP_BIND_ENABLE;
if (!qhp->ibqp.uobject)
wqe->u.init.qp_caps |= FW_RI_QP_FAST_REGISTER_ENABLE |
FW_RI_QP_STAG0_ENABLE;
wqe->u.init.nrqe = cpu_to_be16(t4_rqes_posted(&qhp->wq));
wqe->u.init.pdid = cpu_to_be32(qhp->attr.pd);
wqe->u.init.qpid = cpu_to_be32(qhp->wq.sq.qid);
wqe->u.init.sq_eqid = cpu_to_be32(qhp->wq.sq.qid);
wqe->u.init.rq_eqid = cpu_to_be32(qhp->wq.rq.qid);
wqe->u.init.scqid = cpu_to_be32(qhp->attr.scq);
wqe->u.init.rcqid = cpu_to_be32(qhp->attr.rcq);
wqe->u.init.ord_max = cpu_to_be32(qhp->attr.max_ord);
wqe->u.init.ird_max = cpu_to_be32(qhp->attr.max_ird);
wqe->u.init.iss = cpu_to_be32(qhp->ep->snd_seq);
wqe->u.init.irs = cpu_to_be32(qhp->ep->rcv_seq);
wqe->u.init.hwrqsize = cpu_to_be32(qhp->wq.rq.rqt_size);
wqe->u.init.hwrqaddr = cpu_to_be32(qhp->wq.rq.rqt_hwaddr -
rhp->rdev.lldi.vr->rq.start);
if (qhp->attr.mpa_attr.initiator)
build_rtr_msg(qhp->attr.mpa_attr.p2p_type, &wqe->u.init);
ret = c4iw_ofld_send(&rhp->rdev, skb);
if (ret)
goto out;
ret = c4iw_wait_for_reply(&rhp->rdev, &qhp->ep->com.wr_wait,
qhp->ep->hwtid, qhp->wq.sq.qid, __func__);
out:
PDBG("%s ret %d\n", __func__, ret);
return ret;
}
int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
enum c4iw_qp_attr_mask mask,
struct c4iw_qp_attributes *attrs,
int internal)
{
int ret = 0;
struct c4iw_qp_attributes newattr = qhp->attr;
int disconnect = 0;
int terminate = 0;
int abort = 0;
int free = 0;
struct c4iw_ep *ep = NULL;
PDBG("%s qhp %p sqid 0x%x rqid 0x%x ep %p state %d -> %d\n", __func__,
qhp, qhp->wq.sq.qid, qhp->wq.rq.qid, qhp->ep, qhp->attr.state,
(mask & C4IW_QP_ATTR_NEXT_STATE) ? attrs->next_state : -1);
mutex_lock(&qhp->mutex);
/* Process attr changes if in IDLE */
if (mask & C4IW_QP_ATTR_VALID_MODIFY) {
if (qhp->attr.state != C4IW_QP_STATE_IDLE) {
ret = -EIO;
goto out;
}
if (mask & C4IW_QP_ATTR_ENABLE_RDMA_READ)
newattr.enable_rdma_read = attrs->enable_rdma_read;
if (mask & C4IW_QP_ATTR_ENABLE_RDMA_WRITE)
newattr.enable_rdma_write = attrs->enable_rdma_write;
if (mask & C4IW_QP_ATTR_ENABLE_RDMA_BIND)
newattr.enable_bind = attrs->enable_bind;
if (mask & C4IW_QP_ATTR_MAX_ORD) {
if (attrs->max_ord > c4iw_max_read_depth) {
ret = -EINVAL;
goto out;
}
newattr.max_ord = attrs->max_ord;
}
if (mask & C4IW_QP_ATTR_MAX_IRD) {
if (attrs->max_ird > c4iw_max_read_depth) {
ret = -EINVAL;
goto out;
}
newattr.max_ird = attrs->max_ird;
}
qhp->attr = newattr;
}
if (mask & C4IW_QP_ATTR_SQ_DB) {
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
ret = ring_kernel_sq_db(qhp, attrs->sq_db_inc);
goto out;
}
if (mask & C4IW_QP_ATTR_RQ_DB) {
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
ret = ring_kernel_rq_db(qhp, attrs->rq_db_inc);
goto out;
}
if (!(mask & C4IW_QP_ATTR_NEXT_STATE))
goto out;
if (qhp->attr.state == attrs->next_state)
goto out;
switch (qhp->attr.state) {
case C4IW_QP_STATE_IDLE:
switch (attrs->next_state) {
case C4IW_QP_STATE_RTS:
if (!(mask & C4IW_QP_ATTR_LLP_STREAM_HANDLE)) {
ret = -EINVAL;
goto out;
}
if (!(mask & C4IW_QP_ATTR_MPA_ATTR)) {
ret = -EINVAL;
goto out;
}
qhp->attr.mpa_attr = attrs->mpa_attr;
qhp->attr.llp_stream_handle = attrs->llp_stream_handle;
qhp->ep = qhp->attr.llp_stream_handle;
set_state(qhp, C4IW_QP_STATE_RTS);
/*
* Ref the endpoint here and deref when we
* disassociate the endpoint from the QP. This
* happens in CLOSING->IDLE transition or *->ERROR
* transition.
*/
c4iw_get_ep(&qhp->ep->com);
ret = rdma_init(rhp, qhp);
if (ret)
goto err;
break;
case C4IW_QP_STATE_ERROR:
set_state(qhp, C4IW_QP_STATE_ERROR);
flush_qp(qhp);
break;
default:
ret = -EINVAL;
goto out;
}
break;
case C4IW_QP_STATE_RTS:
switch (attrs->next_state) {
case C4IW_QP_STATE_CLOSING:
BUG_ON(atomic_read(&qhp->ep->com.kref.refcount) < 2);
set_state(qhp, C4IW_QP_STATE_CLOSING);
ep = qhp->ep;
if (!internal) {
abort = 0;
disconnect = 1;
c4iw_get_ep(&qhp->ep->com);
}
t4_set_wq_in_error(&qhp->wq);
ret = rdma_fini(rhp, qhp, ep);
if (ret)
goto err;
break;
case C4IW_QP_STATE_TERMINATE:
set_state(qhp, C4IW_QP_STATE_TERMINATE);
qhp->attr.layer_etype = attrs->layer_etype;
qhp->attr.ecode = attrs->ecode;
t4_set_wq_in_error(&qhp->wq);
ep = qhp->ep;
disconnect = 1;
if (!internal)
terminate = 1;
else {
ret = rdma_fini(rhp, qhp, ep);
if (ret)
goto err;
}
c4iw_get_ep(&qhp->ep->com);
break;
case C4IW_QP_STATE_ERROR:
set_state(qhp, C4IW_QP_STATE_ERROR);
t4_set_wq_in_error(&qhp->wq);
if (!internal) {
abort = 1;
disconnect = 1;
ep = qhp->ep;
c4iw_get_ep(&qhp->ep->com);
}
goto err;
break;
default:
ret = -EINVAL;
goto out;
}
break;
case C4IW_QP_STATE_CLOSING:
if (!internal) {
ret = -EINVAL;
goto out;
}
switch (attrs->next_state) {
case C4IW_QP_STATE_IDLE:
flush_qp(qhp);
set_state(qhp, C4IW_QP_STATE_IDLE);
qhp->attr.llp_stream_handle = NULL;
c4iw_put_ep(&qhp->ep->com);
qhp->ep = NULL;
wake_up(&qhp->wait);
break;
case C4IW_QP_STATE_ERROR:
goto err;
default:
ret = -EINVAL;
goto err;
}
break;
case C4IW_QP_STATE_ERROR:
if (attrs->next_state != C4IW_QP_STATE_IDLE) {
ret = -EINVAL;
goto out;
}
if (!t4_sq_empty(&qhp->wq) || !t4_rq_empty(&qhp->wq)) {
ret = -EINVAL;
goto out;
}
set_state(qhp, C4IW_QP_STATE_IDLE);
break;
case C4IW_QP_STATE_TERMINATE:
if (!internal) {
ret = -EINVAL;
goto out;
}
goto err;
break;
default:
printk(KERN_ERR "%s in a bad state %d\n",
__func__, qhp->attr.state);
ret = -EINVAL;
goto err;
break;
}
goto out;
err:
PDBG("%s disassociating ep %p qpid 0x%x\n", __func__, qhp->ep,
qhp->wq.sq.qid);
/* disassociate the LLP connection */
qhp->attr.llp_stream_handle = NULL;
if (!ep)
ep = qhp->ep;
qhp->ep = NULL;
set_state(qhp, C4IW_QP_STATE_ERROR);
free = 1;
abort = 1;
wake_up(&qhp->wait);
BUG_ON(!ep);
flush_qp(qhp);
out:
mutex_unlock(&qhp->mutex);
if (terminate)
post_terminate(qhp, NULL, internal ? GFP_ATOMIC : GFP_KERNEL);
/*
* If disconnect is 1, then we need to initiate a disconnect
* on the EP. This can be a normal close (RTS->CLOSING) or
* an abnormal close (RTS/CLOSING->ERROR).
*/
if (disconnect) {
c4iw_ep_disconnect(ep, abort, internal ? GFP_ATOMIC :
GFP_KERNEL);
c4iw_put_ep(&ep->com);
}
/*
* If free is 1, then we've disassociated the EP from the QP
* and we need to dereference the EP.
*/
if (free)
c4iw_put_ep(&ep->com);
PDBG("%s exit state %d\n", __func__, qhp->attr.state);
return ret;
}
int c4iw_destroy_qp(struct ib_qp *ib_qp)
{
struct c4iw_dev *rhp;
struct c4iw_qp *qhp;
struct c4iw_qp_attributes attrs;
struct c4iw_ucontext *ucontext;
qhp = to_c4iw_qp(ib_qp);
rhp = qhp->rhp;
attrs.next_state = C4IW_QP_STATE_ERROR;
if (qhp->attr.state == C4IW_QP_STATE_TERMINATE)
c4iw_modify_qp(rhp, qhp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
else
c4iw_modify_qp(rhp, qhp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
wait_event(qhp->wait, !qhp->ep);
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
remove_handle(rhp, &rhp->qpidr, qhp->wq.sq.qid);
atomic_dec(&qhp->refcnt);
wait_event(qhp->wait, !atomic_read(&qhp->refcnt));
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
spin_lock_irq(&rhp->lock);
if (!list_empty(&qhp->db_fc_entry))
list_del_init(&qhp->db_fc_entry);
spin_unlock_irq(&rhp->lock);
ucontext = ib_qp->uobject ?
to_c4iw_ucontext(ib_qp->uobject->context) : NULL;
destroy_qp(&rhp->rdev, &qhp->wq,
ucontext ? &ucontext->uctx : &rhp->rdev.uctx);
PDBG("%s ib_qp %p qpid 0x%0x\n", __func__, ib_qp, qhp->wq.sq.qid);
kfree(qhp);
return 0;
}
struct ib_qp *c4iw_create_qp(struct ib_pd *pd, struct ib_qp_init_attr *attrs,
struct ib_udata *udata)
{
struct c4iw_dev *rhp;
struct c4iw_qp *qhp;
struct c4iw_pd *php;
struct c4iw_cq *schp;
struct c4iw_cq *rchp;
struct c4iw_create_qp_resp uresp;
unsigned int sqsize, rqsize;
struct c4iw_ucontext *ucontext;
int ret;
struct c4iw_mm_entry *mm1, *mm2, *mm3, *mm4, *mm5 = NULL;
PDBG("%s ib_pd %p\n", __func__, pd);
if (attrs->qp_type != IB_QPT_RC)
return ERR_PTR(-EINVAL);
php = to_c4iw_pd(pd);
rhp = php->rhp;
schp = get_chp(rhp, ((struct c4iw_cq *)attrs->send_cq)->cq.cqid);
rchp = get_chp(rhp, ((struct c4iw_cq *)attrs->recv_cq)->cq.cqid);
if (!schp || !rchp)
return ERR_PTR(-EINVAL);
if (attrs->cap.max_inline_data > T4_MAX_SEND_INLINE)
return ERR_PTR(-EINVAL);
rqsize = roundup(attrs->cap.max_recv_wr + 1, 16);
if (rqsize > T4_MAX_RQ_SIZE)
return ERR_PTR(-E2BIG);
sqsize = roundup(attrs->cap.max_send_wr + 1, 16);
if (sqsize > T4_MAX_SQ_SIZE)
return ERR_PTR(-E2BIG);
ucontext = pd->uobject ? to_c4iw_ucontext(pd->uobject->context) : NULL;
qhp = kzalloc(sizeof(*qhp), GFP_KERNEL);
if (!qhp)
return ERR_PTR(-ENOMEM);
qhp->wq.sq.size = sqsize;
qhp->wq.sq.memsize = (sqsize + 1) * sizeof *qhp->wq.sq.queue;
qhp->wq.sq.flush_cidx = -1;
qhp->wq.rq.size = rqsize;
qhp->wq.rq.memsize = (rqsize + 1) * sizeof *qhp->wq.rq.queue;
if (ucontext) {
qhp->wq.sq.memsize = roundup(qhp->wq.sq.memsize, PAGE_SIZE);
qhp->wq.rq.memsize = roundup(qhp->wq.rq.memsize, PAGE_SIZE);
}
PDBG("%s sqsize %u sqmemsize %zu rqsize %u rqmemsize %zu\n",
__func__, sqsize, qhp->wq.sq.memsize, rqsize, qhp->wq.rq.memsize);
ret = create_qp(&rhp->rdev, &qhp->wq, &schp->cq, &rchp->cq,
ucontext ? &ucontext->uctx : &rhp->rdev.uctx);
if (ret)
goto err1;
attrs->cap.max_recv_wr = rqsize - 1;
attrs->cap.max_send_wr = sqsize - 1;
attrs->cap.max_inline_data = T4_MAX_SEND_INLINE;
qhp->rhp = rhp;
qhp->attr.pd = php->pdid;
qhp->attr.scq = ((struct c4iw_cq *) attrs->send_cq)->cq.cqid;
qhp->attr.rcq = ((struct c4iw_cq *) attrs->recv_cq)->cq.cqid;
qhp->attr.sq_num_entries = attrs->cap.max_send_wr;
qhp->attr.rq_num_entries = attrs->cap.max_recv_wr;
qhp->attr.sq_max_sges = attrs->cap.max_send_sge;
qhp->attr.sq_max_sges_rdma_write = attrs->cap.max_send_sge;
qhp->attr.rq_max_sges = attrs->cap.max_recv_sge;
qhp->attr.state = C4IW_QP_STATE_IDLE;
qhp->attr.next_state = C4IW_QP_STATE_IDLE;
qhp->attr.enable_rdma_read = 1;
qhp->attr.enable_rdma_write = 1;
qhp->attr.enable_bind = 1;
qhp->attr.max_ord = 1;
qhp->attr.max_ird = 1;
qhp->sq_sig_all = attrs->sq_sig_type == IB_SIGNAL_ALL_WR;
spin_lock_init(&qhp->lock);
mutex_init(&qhp->mutex);
init_waitqueue_head(&qhp->wait);
atomic_set(&qhp->refcnt, 1);
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
ret = insert_handle(rhp, &rhp->qpidr, qhp, qhp->wq.sq.qid);
if (ret)
goto err2;
if (udata) {
mm1 = kmalloc(sizeof *mm1, GFP_KERNEL);
if (!mm1) {
ret = -ENOMEM;
goto err3;
}
mm2 = kmalloc(sizeof *mm2, GFP_KERNEL);
if (!mm2) {
ret = -ENOMEM;
goto err4;
}
mm3 = kmalloc(sizeof *mm3, GFP_KERNEL);
if (!mm3) {
ret = -ENOMEM;
goto err5;
}
mm4 = kmalloc(sizeof *mm4, GFP_KERNEL);
if (!mm4) {
ret = -ENOMEM;
goto err6;
}
if (t4_sq_onchip(&qhp->wq.sq)) {
mm5 = kmalloc(sizeof *mm5, GFP_KERNEL);
if (!mm5) {
ret = -ENOMEM;
goto err7;
}
uresp.flags = C4IW_QPF_ONCHIP;
} else
uresp.flags = 0;
uresp.qid_mask = rhp->rdev.qpmask;
uresp.sqid = qhp->wq.sq.qid;
uresp.sq_size = qhp->wq.sq.size;
uresp.sq_memsize = qhp->wq.sq.memsize;
uresp.rqid = qhp->wq.rq.qid;
uresp.rq_size = qhp->wq.rq.size;
uresp.rq_memsize = qhp->wq.rq.memsize;
spin_lock(&ucontext->mmap_lock);
if (mm5) {
uresp.ma_sync_key = ucontext->key;
ucontext->key += PAGE_SIZE;
} else {
uresp.ma_sync_key = 0;
}
uresp.sq_key = ucontext->key;
ucontext->key += PAGE_SIZE;
uresp.rq_key = ucontext->key;
ucontext->key += PAGE_SIZE;
uresp.sq_db_gts_key = ucontext->key;
ucontext->key += PAGE_SIZE;
uresp.rq_db_gts_key = ucontext->key;
ucontext->key += PAGE_SIZE;
spin_unlock(&ucontext->mmap_lock);
ret = ib_copy_to_udata(udata, &uresp, sizeof uresp);
if (ret)
goto err8;
mm1->key = uresp.sq_key;
mm1->addr = qhp->wq.sq.phys_addr;
mm1->len = PAGE_ALIGN(qhp->wq.sq.memsize);
insert_mmap(ucontext, mm1);
mm2->key = uresp.rq_key;
mm2->addr = virt_to_phys(qhp->wq.rq.queue);
mm2->len = PAGE_ALIGN(qhp->wq.rq.memsize);
insert_mmap(ucontext, mm2);
mm3->key = uresp.sq_db_gts_key;
mm3->addr = qhp->wq.sq.udb;
mm3->len = PAGE_SIZE;
insert_mmap(ucontext, mm3);
mm4->key = uresp.rq_db_gts_key;
mm4->addr = qhp->wq.rq.udb;
mm4->len = PAGE_SIZE;
insert_mmap(ucontext, mm4);
if (mm5) {
mm5->key = uresp.ma_sync_key;
mm5->addr = (pci_resource_start(rhp->rdev.lldi.pdev, 0)
+ A_PCIE_MA_SYNC) & PAGE_MASK;
mm5->len = PAGE_SIZE;
insert_mmap(ucontext, mm5);
}
}
qhp->ibqp.qp_num = qhp->wq.sq.qid;
init_timer(&(qhp->timer));
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
INIT_LIST_HEAD(&qhp->db_fc_entry);
PDBG("%s qhp %p sq_num_entries %d, rq_num_entries %d qpid 0x%0x\n",
__func__, qhp, qhp->attr.sq_num_entries, qhp->attr.rq_num_entries,
qhp->wq.sq.qid);
return &qhp->ibqp;
err8:
kfree(mm5);
err7:
kfree(mm4);
err6:
kfree(mm3);
err5:
kfree(mm2);
err4:
kfree(mm1);
err3:
remove_handle(rhp, &rhp->qpidr, qhp->wq.sq.qid);
err2:
destroy_qp(&rhp->rdev, &qhp->wq,
ucontext ? &ucontext->uctx : &rhp->rdev.uctx);
err1:
kfree(qhp);
return ERR_PTR(ret);
}
int c4iw_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_udata *udata)
{
struct c4iw_dev *rhp;
struct c4iw_qp *qhp;
enum c4iw_qp_attr_mask mask = 0;
struct c4iw_qp_attributes attrs;
PDBG("%s ib_qp %p\n", __func__, ibqp);
/* iwarp does not support the RTR state */
if ((attr_mask & IB_QP_STATE) && (attr->qp_state == IB_QPS_RTR))
attr_mask &= ~IB_QP_STATE;
/* Make sure we still have something left to do */
if (!attr_mask)
return 0;
memset(&attrs, 0, sizeof attrs);
qhp = to_c4iw_qp(ibqp);
rhp = qhp->rhp;
attrs.next_state = c4iw_convert_state(attr->qp_state);
attrs.enable_rdma_read = (attr->qp_access_flags &
IB_ACCESS_REMOTE_READ) ? 1 : 0;
attrs.enable_rdma_write = (attr->qp_access_flags &
IB_ACCESS_REMOTE_WRITE) ? 1 : 0;
attrs.enable_bind = (attr->qp_access_flags & IB_ACCESS_MW_BIND) ? 1 : 0;
mask |= (attr_mask & IB_QP_STATE) ? C4IW_QP_ATTR_NEXT_STATE : 0;
mask |= (attr_mask & IB_QP_ACCESS_FLAGS) ?
(C4IW_QP_ATTR_ENABLE_RDMA_READ |
C4IW_QP_ATTR_ENABLE_RDMA_WRITE |
C4IW_QP_ATTR_ENABLE_RDMA_BIND) : 0;
/*
* Use SQ_PSN and RQ_PSN to pass in IDX_INC values for
* ringing the queue db when we're in DB_FULL mode.
*/
attrs.sq_db_inc = attr->sq_psn;
attrs.rq_db_inc = attr->rq_psn;
mask |= (attr_mask & IB_QP_SQ_PSN) ? C4IW_QP_ATTR_SQ_DB : 0;
mask |= (attr_mask & IB_QP_RQ_PSN) ? C4IW_QP_ATTR_RQ_DB : 0;
return c4iw_modify_qp(rhp, qhp, mask, &attrs, 0);
}
struct ib_qp *c4iw_get_qp(struct ib_device *dev, int qpn)
{
PDBG("%s ib_dev %p qpn 0x%x\n", __func__, dev, qpn);
return (struct ib_qp *)get_qhp(to_c4iw_dev(dev), qpn);
}
int c4iw_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_qp_init_attr *init_attr)
{
struct c4iw_qp *qhp = to_c4iw_qp(ibqp);
memset(attr, 0, sizeof *attr);
memset(init_attr, 0, sizeof *init_attr);
attr->qp_state = to_ib_qp_state(qhp->attr.state);
return 0;
}