OpenCloudOS-Kernel/drivers/media/dvb-frontends/dib8000.h

77 lines
2.6 KiB
C
Raw Normal View History

#ifndef DIB8000_H
#define DIB8000_H
#include "dibx000_common.h"
struct dib8000_config {
u8 output_mpeg2_in_188_bytes;
u8 hostbus_diversity;
u8 tuner_is_baseband;
int (*update_lna) (struct dvb_frontend *, u16 agc_global);
u8 agc_config_count;
struct dibx000_agc_config *agc;
struct dibx000_bandwidth_config *pll;
#define DIB8000_GPIO_DEFAULT_DIRECTIONS 0xffff
u16 gpio_dir;
#define DIB8000_GPIO_DEFAULT_VALUES 0x0000
u16 gpio_val;
#define DIB8000_GPIO_PWM_POS0(v) ((v & 0xf) << 12)
#define DIB8000_GPIO_PWM_POS1(v) ((v & 0xf) << 8 )
#define DIB8000_GPIO_PWM_POS2(v) ((v & 0xf) << 4 )
#define DIB8000_GPIO_PWM_POS3(v) (v & 0xf)
#define DIB8000_GPIO_DEFAULT_PWM_POS 0xffff
u16 gpio_pwm_pos;
u16 pwm_freq_div;
void (*agc_control) (struct dvb_frontend *, u8 before);
u16 drives;
u16 diversity_delay;
u8 div_cfg;
u8 output_mode;
u8 refclksel;
u8 enMpegOutput:1;
struct dibx000_bandwidth_config *plltable;
};
#define DEFAULT_DIB8000_I2C_ADDRESS 18
struct dib8000_ops {
int (*set_wbd_ref)(struct dvb_frontend *fe, u16 value);
int (*update_pll)(struct dvb_frontend *fe,
struct dibx000_bandwidth_config *pll, u32 bw, u8 ratio);
int (*set_gpio)(struct dvb_frontend *fe, u8 num, u8 dir, u8 val);
void (*pwm_agc_reset)(struct dvb_frontend *fe);
struct i2c_adapter *(*get_i2c_tuner)(struct dvb_frontend *fe);
int (*tuner_sleep)(struct dvb_frontend *fe, int onoff);
s32 (*get_adc_power)(struct dvb_frontend *fe, u8 mode);
int (*get_dc_power)(struct dvb_frontend *fe, u8 IQ);
u32 (*ctrl_timf)(struct dvb_frontend *fe, uint8_t op, uint32_t timf);
enum frontend_tune_state (*get_tune_state)(struct dvb_frontend *fe);
int (*set_tune_state)(struct dvb_frontend *fe, enum frontend_tune_state tune_state);
int (*set_slave_frontend)(struct dvb_frontend *fe, struct dvb_frontend *fe_slave);
int (*remove_slave_frontend)(struct dvb_frontend *fe);
struct dvb_frontend *(*get_slave_frontend)(struct dvb_frontend *fe, int slave_index);
int (*i2c_enumeration)(struct i2c_adapter *host, int no_of_demods,
u8 default_addr, u8 first_addr, u8 is_dib8096p);
struct i2c_adapter *(*get_i2c_master)(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating);
int (*pid_filter_ctrl)(struct dvb_frontend *fe, u8 onoff);
int (*pid_filter)(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff);
struct dvb_frontend *(*init)(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg);
};
[media] Add and use IS_REACHABLE macro In the media drivers, the v4l2 core knows about all submodules and calls into them from a common function. However this cannot work if the modules that get called are loadable and the core is built-in. In that case we get drivers/built-in.o: In function `set_type': drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach' drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach' drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach' drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach' This was working previously, until the IS_ENABLED() macro was used to replace the construct like #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) with the difference that the new code no longer checks whether it is being built as a loadable module itself. To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates true in exactly the condition that was used previously. The downside of this is that this trades an obvious link error for a more subtle runtime failure, but it is clear that the change that introduced the link error was unintentional and it seems better to revert it for now. Also, a similar change was originally created by Trent Piepho and then reverted by teh change to the IS_ENABLED macro. Ideally Kconfig would be used to avoid the case of a broken dependency, or the code restructured in a way to turn around the dependency, but either way would require much larger changes here. Fixes: 7b34be71db53 ("[media] use IS_ENABLED() macro") See-also: c5dec9fb248e ("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-19 01:12:42 +08:00
#if IS_REACHABLE(CONFIG_DVB_DIB8000)
void *dib8000_attach(struct dib8000_ops *ops);
#else
static inline void *dib8000_attach(struct dib8000_ops *ops)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
#endif
#endif