UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm64/kernel/psci.c

129 lines
2.9 KiB
C
Raw Normal View History

arm64: psci: add support for PSCI invocations from the kernel This patch adds support for the Power State Coordination Interface defined by ARM, allowing Linux to request CPU-centric power-management operations from firmware implementing the PSCI protocol. Signed-off-by: Will Deacon <will.deacon@arm.com> [Marc: s/u32/u64/ in the relevant spots, and switch from an initcall to an simpler init function] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-12-19 01:53:14 +08:00
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2013 ARM Limited
*
* Author: Will Deacon <will.deacon@arm.com>
*/
#define pr_fmt(fmt) "psci: " fmt
#include <linux/init.h>
#include <linux/of.h>
arm64: unify smp_psci.c and psci.c The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:14 +08:00
#include <linux/smp.h>
ARM: Check if a CPU has gone offline PSCIv0.2 adds a new function called AFFINITY_INFO, which can be used to query if a specified CPU has actually gone offline. Calling this function via cpu_kill ensures that a CPU has quiesced after a call to cpu_die. This helps prevent the CPU from doing arbitrary bad things when data or instructions are clobbered (as happens with kexec) in the window between a CPU announcing that it is dead and said CPU leaving the kernel. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-07 22:18:36 +08:00
#include <linux/delay.h>
arm64: psci: factor invocation code to drivers To enable sharing with arm, move the core PSCI framework code to drivers/firmware. This results in a minor gain in lines of code, but this will quickly be amortised by the removal of code currently duplicated in arch/arm. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-31 22:46:16 +08:00
#include <linux/psci.h>
PSCI: Add initial support for PSCIv0.2 functions The PSCIv0.2 spec defines standard values of function IDs and introduces a few new functions. Detect version of PSCI and appropriately select the right PSCI functions. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-18 02:38:41 +08:00
#include <uapi/linux/psci.h>
arm64: psci: add support for PSCI invocations from the kernel This patch adds support for the Power State Coordination Interface defined by ARM, allowing Linux to request CPU-centric power-management operations from firmware implementing the PSCI protocol. Signed-off-by: Will Deacon <will.deacon@arm.com> [Marc: s/u32/u64/ in the relevant spots, and switch from an initcall to an simpler init function] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-12-19 01:53:14 +08:00
#include <asm/compiler.h>
arm64: reorganise smp_enable_ops For hotplug support, we're going to want a place to store operations that do more than bring CPUs online, and it makes sense to group these with our current smp_enable_ops. For cpuidle support, we'll want to group additional functions, and we may want them even for UP kernels. This patch renames smp_enable_ops to the more general cpu_operations, and pulls the definitions out of smp code such that they can be used in UP kernels. While we're at it, fix up instances of the cpu parameter to be an unsigned int, drop the init markings and rename the *_cpu functions to cpu_* to reduce future churn when cpu_operations is extended. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:15 +08:00
#include <asm/cpu_ops.h>
arm64: psci: add support for PSCI invocations from the kernel This patch adds support for the Power State Coordination Interface defined by ARM, allowing Linux to request CPU-centric power-management operations from firmware implementing the PSCI protocol. Signed-off-by: Will Deacon <will.deacon@arm.com> [Marc: s/u32/u64/ in the relevant spots, and switch from an initcall to an simpler init function] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-12-19 01:53:14 +08:00
#include <asm/errno.h>
arm64: unify smp_psci.c and psci.c The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:14 +08:00
#include <asm/smp_plat.h>
arm64: add PSCI CPU_SUSPEND based cpu_suspend support This patch implements the cpu_suspend cpu operations method through the PSCI CPU SUSPEND API. The PSCI implementation translates the idle state index passed by the cpu_suspend core call into a valid PSCI state according to the PSCI states initialized at boot through the cpu_init_idle() CPU operations hook. The PSCI CPU suspend operation hook checks if the PSCI state is a standby state. If it is, it calls the PSCI suspend implementation straight away, without saving any context. If the state is a power down state the kernel calls the __cpu_suspend API (that saves the CPU context) and passed the PSCI suspend finisher as a parameter so that PSCI can be called by the __cpu_suspend implementation after saving and flushing the context as last function before power down. For power down states, entry point is set to cpu_resume physical address, that represents the default kernel execution address following a CPU reset. Reviewed-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-27 17:25:02 +08:00
ARM64: kernel: make cpu_ops hooks DT agnostic ARM64 CPU operations such as cpu_init and cpu_init_idle take a struct device_node pointer as a parameter, which corresponds to the device tree node of the logical cpu on which the operation has to be applied. With the advent of ACPI on arm64, where MADT static table entries are used to initialize cpus, the device tree node parameter in cpu_ops hooks become useless when booting with ACPI, since in that case cpu device tree nodes are not present and can not be used for cpu initialization. The current cpu_init hook requires a struct device_node pointer parameter because it is called while parsing the device tree to initialize CPUs, when the cpu_logical_map (that is used to match a cpu node reg property to a device tree node) for a given logical cpu id is not set up yet. This means that the cpu_init hook cannot rely on the of_get_cpu_node function to retrieve the device tree node corresponding to the logical cpu id passed in as parameter, so the cpu device tree node must be passed in as a parameter to fix this catch-22 dependency cycle. This patch reshuffles the cpu_logical_map initialization code so that the cpu_init cpu_ops hook can safely use the of_get_cpu_node function to retrieve the cpu device tree node, removing the need for the device tree node pointer parameter. In the process, the patch removes device tree node parameters from all cpu_ops hooks, in preparation for SMP DT/ACPI cpus initialization consolidation. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Mark Rutland <mark.rutland@arm.com> [DT] Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-05-13 21:12:46 +08:00
static int __init cpu_psci_cpu_init(unsigned int cpu)
arm64: unify smp_psci.c and psci.c The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:14 +08:00
{
return 0;
}
arm64: reorganise smp_enable_ops For hotplug support, we're going to want a place to store operations that do more than bring CPUs online, and it makes sense to group these with our current smp_enable_ops. For cpuidle support, we'll want to group additional functions, and we may want them even for UP kernels. This patch renames smp_enable_ops to the more general cpu_operations, and pulls the definitions out of smp code such that they can be used in UP kernels. While we're at it, fix up instances of the cpu parameter to be an unsigned int, drop the init markings and rename the *_cpu functions to cpu_* to reduce future churn when cpu_operations is extended. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:15 +08:00
static int __init cpu_psci_cpu_prepare(unsigned int cpu)
arm64: unify smp_psci.c and psci.c The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:14 +08:00
{
if (!psci_ops.cpu_on) {
pr_err("no cpu_on method, not booting CPU%d\n", cpu);
return -ENODEV;
}
return 0;
}
arm64: factor out spin-table boot method The arm64 kernel has an internal holding pen, which is necessary for some systems where we can't bring CPUs online individually and must hold multiple CPUs in a safe area until the kernel is able to handle them. The current SMP infrastructure for arm64 is closely coupled to this holding pen, and alternative boot methods must launch CPUs into the pen, where they sit before they are launched into the kernel proper. With PSCI (and possibly other future boot methods), we can bring CPUs online individually, and need not perform the secondary_holding_pen dance. Instead, this patch factors the holding pen management code out to the spin-table boot method code, as it is the only boot method requiring the pen. A new entry point for secondaries, secondary_entry is added for other boot methods to use, which bypasses the holding pen and its associated overhead when bringing CPUs online. The smp.pen.text section is also removed, as the pen can live in head.text without problem. The cpu_operations structure is extended with two new functions, cpu_boot and cpu_postboot, for bringing a cpu into the kernel and performing any post-boot cleanup required by a bootmethod (e.g. resetting the secondary_holding_pen_release to INVALID_HWID). Documentation is added for cpu_operations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:16 +08:00
static int cpu_psci_cpu_boot(unsigned int cpu)
{
int err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_entry));
if (err)
arm64: remove redundant "psci:" prefixes Since 652af899799354049b273af897b798b8f03fdd88 "arm64: factor out spin-table boot method" psci prefix's been introduced. We have a common pr_fmt, so clean them up. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-28 17:57:47 +08:00
pr_err("failed to boot CPU%d (%d)\n", cpu, err);
arm64: factor out spin-table boot method The arm64 kernel has an internal holding pen, which is necessary for some systems where we can't bring CPUs online individually and must hold multiple CPUs in a safe area until the kernel is able to handle them. The current SMP infrastructure for arm64 is closely coupled to this holding pen, and alternative boot methods must launch CPUs into the pen, where they sit before they are launched into the kernel proper. With PSCI (and possibly other future boot methods), we can bring CPUs online individually, and need not perform the secondary_holding_pen dance. Instead, this patch factors the holding pen management code out to the spin-table boot method code, as it is the only boot method requiring the pen. A new entry point for secondaries, secondary_entry is added for other boot methods to use, which bypasses the holding pen and its associated overhead when bringing CPUs online. The smp.pen.text section is also removed, as the pen can live in head.text without problem. The cpu_operations structure is extended with two new functions, cpu_boot and cpu_postboot, for bringing a cpu into the kernel and performing any post-boot cleanup required by a bootmethod (e.g. resetting the secondary_holding_pen_release to INVALID_HWID). Documentation is added for cpu_operations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:16 +08:00
return err;
}
arm64: add PSCI CPU_OFF-based hotplug support This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:19 +08:00
#ifdef CONFIG_HOTPLUG_CPU
static int cpu_psci_cpu_disable(unsigned int cpu)
{
/* Fail early if we don't have CPU_OFF support */
if (!psci_ops.cpu_off)
return -EOPNOTSUPP;
arm64: psci: account for Trusted OS instances Software resident in the secure world (a "Trusted OS") may cause CPU_OFF calls for the CPU it is resident on to be denied. Such a denial would be fatal for the kernel, and so we must detect when this can happen before the point of no return. This patch implements Trusted OS detection for PSCI 0.2+ systems, using MIGRATE_INFO_TYPE and MIGRATE_INFO_UP_CPU. When a trusted OS is detected as resident on a particular CPU, attempts to hot unplug that CPU will be denied early, before they can prove fatal. Trusted OS migration is not implemented by this patch. Implementation of migratable UP trusted OSs seems unlikely, and the right policy for migration is unclear (and will likely differ across implementations). As such, it is likely that migration will require cooperation with Trusted OS drivers. PSCI implementations prior to 0.1 do not provide the facility to detect the presence of a Trusted OS, nor the CPU any such OS is resident on, so without additional information it is not possible to handle Trusted OSs with PSCI 0.1. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com>
2015-04-23 01:10:26 +08:00
/* Trusted OS will deny CPU_OFF */
if (psci_tos_resident_on(cpu))
return -EPERM;
arm64: add PSCI CPU_OFF-based hotplug support This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:19 +08:00
return 0;
}
static void cpu_psci_cpu_die(unsigned int cpu)
{
int ret;
/*
* There are no known implementations of PSCI actually using the
* power state field, pass a sensible default for now.
*/
arm64: psci: kill psci_power_state A PSCI 1.0 implementation may choose to use the new extended StateID format, the presence of which may be queried via the PSCI_FEATURES call. The layout of this new StateID format is incompatible with the existing format, and so to handle both we must abstract attempts to parse the fields. In preparation for PSCI 1.0 support, this patch introduces psci_power_state_loses_context and psci_power_state_is_valid functions to query information from a PSCI power state, which is no longer decomposed (and hence the pack/unpack functions are removed). As it is no longer decomposed, it is now passed round as an opaque u32 token. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2015-05-01 00:59:03 +08:00
u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
PSCI_0_2_POWER_STATE_TYPE_SHIFT;
arm64: add PSCI CPU_OFF-based hotplug support This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:19 +08:00
ret = psci_ops.cpu_off(state);
arm64: remove redundant "psci:" prefixes Since 652af899799354049b273af897b798b8f03fdd88 "arm64: factor out spin-table boot method" psci prefix's been introduced. We have a common pr_fmt, so clean them up. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-28 17:57:47 +08:00
pr_crit("unable to power off CPU%u (%d)\n", cpu, ret);
arm64: add PSCI CPU_OFF-based hotplug support This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:19 +08:00
}
ARM: Check if a CPU has gone offline PSCIv0.2 adds a new function called AFFINITY_INFO, which can be used to query if a specified CPU has actually gone offline. Calling this function via cpu_kill ensures that a CPU has quiesced after a call to cpu_die. This helps prevent the CPU from doing arbitrary bad things when data or instructions are clobbered (as happens with kexec) in the window between a CPU announcing that it is dead and said CPU leaving the kernel. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-07 22:18:36 +08:00
static int cpu_psci_cpu_kill(unsigned int cpu)
{
int err, i;
if (!psci_ops.affinity_info)
arm64: smp: consistently use error codes cpu_kill currently returns one for success and zero for failure, which is unlike all the other cpu_operations, which return zero for success and an error code upon failure. This difference is unnecessarily confusing. Make cpu_kill consistent with the other cpu_operations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2015-04-21 00:55:30 +08:00
return 0;
ARM: Check if a CPU has gone offline PSCIv0.2 adds a new function called AFFINITY_INFO, which can be used to query if a specified CPU has actually gone offline. Calling this function via cpu_kill ensures that a CPU has quiesced after a call to cpu_die. This helps prevent the CPU from doing arbitrary bad things when data or instructions are clobbered (as happens with kexec) in the window between a CPU announcing that it is dead and said CPU leaving the kernel. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-07 22:18:36 +08:00
/*
* cpu_kill could race with cpu_die and we can
* potentially end up declaring this cpu undead
* while it is dying. So, try again a few times.
*/
for (i = 0; i < 10; i++) {
err = psci_ops.affinity_info(cpu_logical_map(cpu), 0);
if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) {
pr_info("CPU%d killed.\n", cpu);
arm64: smp: consistently use error codes cpu_kill currently returns one for success and zero for failure, which is unlike all the other cpu_operations, which return zero for success and an error code upon failure. This difference is unnecessarily confusing. Make cpu_kill consistent with the other cpu_operations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2015-04-21 00:55:30 +08:00
return 0;
ARM: Check if a CPU has gone offline PSCIv0.2 adds a new function called AFFINITY_INFO, which can be used to query if a specified CPU has actually gone offline. Calling this function via cpu_kill ensures that a CPU has quiesced after a call to cpu_die. This helps prevent the CPU from doing arbitrary bad things when data or instructions are clobbered (as happens with kexec) in the window between a CPU announcing that it is dead and said CPU leaving the kernel. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-07 22:18:36 +08:00
}
msleep(10);
pr_info("Retrying again to check for CPU kill\n");
}
pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",
cpu, err);
arm64: smp: consistently use error codes cpu_kill currently returns one for success and zero for failure, which is unlike all the other cpu_operations, which return zero for success and an error code upon failure. This difference is unnecessarily confusing. Make cpu_kill consistent with the other cpu_operations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2015-04-21 00:55:30 +08:00
return -ETIMEDOUT;
ARM: Check if a CPU has gone offline PSCIv0.2 adds a new function called AFFINITY_INFO, which can be used to query if a specified CPU has actually gone offline. Calling this function via cpu_kill ensures that a CPU has quiesced after a call to cpu_die. This helps prevent the CPU from doing arbitrary bad things when data or instructions are clobbered (as happens with kexec) in the window between a CPU announcing that it is dead and said CPU leaving the kernel. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-07 22:18:36 +08:00
}
arm64: add PSCI CPU_OFF-based hotplug support This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:19 +08:00
#endif
arm64: reorganise smp_enable_ops For hotplug support, we're going to want a place to store operations that do more than bring CPUs online, and it makes sense to group these with our current smp_enable_ops. For cpuidle support, we'll want to group additional functions, and we may want them even for UP kernels. This patch renames smp_enable_ops to the more general cpu_operations, and pulls the definitions out of smp code such that they can be used in UP kernels. While we're at it, fix up instances of the cpu parameter to be an unsigned int, drop the init markings and rename the *_cpu functions to cpu_* to reduce future churn when cpu_operations is extended. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:15 +08:00
const struct cpu_operations cpu_psci_ops = {
arm64: unify smp_psci.c and psci.c The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:14 +08:00
.name = "psci",
arm64: add PSCI CPU_SUSPEND based cpu_suspend support This patch implements the cpu_suspend cpu operations method through the PSCI CPU SUSPEND API. The PSCI implementation translates the idle state index passed by the cpu_suspend core call into a valid PSCI state according to the PSCI states initialized at boot through the cpu_init_idle() CPU operations hook. The PSCI CPU suspend operation hook checks if the PSCI state is a standby state. If it is, it calls the PSCI suspend implementation straight away, without saving any context. If the state is a power down state the kernel calls the __cpu_suspend API (that saves the CPU context) and passed the PSCI suspend finisher as a parameter so that PSCI can be called by the __cpu_suspend implementation after saving and flushing the context as last function before power down. For power down states, entry point is set to cpu_resume physical address, that represents the default kernel execution address following a CPU reset. Reviewed-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-27 17:25:02 +08:00
#ifdef CONFIG_CPU_IDLE
ARM: 8511/1: ARM64: kernel: PSCI: move PSCI idle management code to drivers/firmware ARM64 PSCI kernel interfaces that initialize idle states and implement the suspend API to enter them are generic and can be shared with the ARM architecture. To achieve that goal, this patch moves ARM64 PSCI idle management code to drivers/firmware, so that the interface to initialize and enter idle states can actually be shared by ARM and ARM64 arches back-ends. The ARM generic CPUidle implementation also requires the definition of a cpuidle_ops section entry for the kernel to initialize the CPUidle operations at boot based on the enable-method (ie ARM64 has the statically initialized cpu_ops counterparts for that purpose); therefore this patch also adds the required section entry on CONFIG_ARM for PSCI so that the kernel can initialize the PSCI CPUidle back-end when PSCI is the probed enable-method. On ARM64 this patch provides no functional change. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arch/arm64] Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-02 01:01:30 +08:00
.cpu_init_idle = psci_cpu_init_idle,
.cpu_suspend = psci_cpu_suspend_enter,
arm64: add PSCI CPU_SUSPEND based cpu_suspend support This patch implements the cpu_suspend cpu operations method through the PSCI CPU SUSPEND API. The PSCI implementation translates the idle state index passed by the cpu_suspend core call into a valid PSCI state according to the PSCI states initialized at boot through the cpu_init_idle() CPU operations hook. The PSCI CPU suspend operation hook checks if the PSCI state is a standby state. If it is, it calls the PSCI suspend implementation straight away, without saving any context. If the state is a power down state the kernel calls the __cpu_suspend API (that saves the CPU context) and passed the PSCI suspend finisher as a parameter so that PSCI can be called by the __cpu_suspend implementation after saving and flushing the context as last function before power down. For power down states, entry point is set to cpu_resume physical address, that represents the default kernel execution address following a CPU reset. Reviewed-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-27 17:25:02 +08:00
#endif
arm64: reorganise smp_enable_ops For hotplug support, we're going to want a place to store operations that do more than bring CPUs online, and it makes sense to group these with our current smp_enable_ops. For cpuidle support, we'll want to group additional functions, and we may want them even for UP kernels. This patch renames smp_enable_ops to the more general cpu_operations, and pulls the definitions out of smp code such that they can be used in UP kernels. While we're at it, fix up instances of the cpu parameter to be an unsigned int, drop the init markings and rename the *_cpu functions to cpu_* to reduce future churn when cpu_operations is extended. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:15 +08:00
.cpu_init = cpu_psci_cpu_init,
.cpu_prepare = cpu_psci_cpu_prepare,
arm64: factor out spin-table boot method The arm64 kernel has an internal holding pen, which is necessary for some systems where we can't bring CPUs online individually and must hold multiple CPUs in a safe area until the kernel is able to handle them. The current SMP infrastructure for arm64 is closely coupled to this holding pen, and alternative boot methods must launch CPUs into the pen, where they sit before they are launched into the kernel proper. With PSCI (and possibly other future boot methods), we can bring CPUs online individually, and need not perform the secondary_holding_pen dance. Instead, this patch factors the holding pen management code out to the spin-table boot method code, as it is the only boot method requiring the pen. A new entry point for secondaries, secondary_entry is added for other boot methods to use, which bypasses the holding pen and its associated overhead when bringing CPUs online. The smp.pen.text section is also removed, as the pen can live in head.text without problem. The cpu_operations structure is extended with two new functions, cpu_boot and cpu_postboot, for bringing a cpu into the kernel and performing any post-boot cleanup required by a bootmethod (e.g. resetting the secondary_holding_pen_release to INVALID_HWID). Documentation is added for cpu_operations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:16 +08:00
.cpu_boot = cpu_psci_cpu_boot,
arm64: add PSCI CPU_OFF-based hotplug support This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:19 +08:00
#ifdef CONFIG_HOTPLUG_CPU
.cpu_disable = cpu_psci_cpu_disable,
.cpu_die = cpu_psci_cpu_die,
ARM: Check if a CPU has gone offline PSCIv0.2 adds a new function called AFFINITY_INFO, which can be used to query if a specified CPU has actually gone offline. Calling this function via cpu_kill ensures that a CPU has quiesced after a call to cpu_die. This helps prevent the CPU from doing arbitrary bad things when data or instructions are clobbered (as happens with kexec) in the window between a CPU announcing that it is dead and said CPU leaving the kernel. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-07 22:18:36 +08:00
.cpu_kill = cpu_psci_cpu_kill,
arm64: add PSCI CPU_OFF-based hotplug support This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:19 +08:00
#endif
arm64: unify smp_psci.c and psci.c The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-25 03:30:14 +08:00
};