OpenCloudOS-Kernel/arch/ia64/kernel/irq_ia64.c

646 lines
15 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/ia64/kernel/irq_ia64.c
*
* Copyright (C) 1998-2001 Hewlett-Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
* David Mosberger-Tang <davidm@hpl.hp.com>
*
* 6/10/99: Updated to bring in sync with x86 version to facilitate
* support for SMP and different interrupt controllers.
*
* 09/15/00 Goutham Rao <goutham.rao@intel.com> Implemented pci_irq_to_vector
* PCI to vector allocation routine.
* 04/14/2004 Ashok Raj <ashok.raj@intel.com>
* Added CPU Hotplug handling for IPF.
*/
#include <linux/module.h>
mm: reorder includes after introduction of linux/pgtable.h The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:32:42 +08:00
#include <linux/pgtable.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel_stat.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/bitops.h>
#include <linux/irq.h>
#include <linux/ratelimit.h>
#include <linux/acpi.h>
#include <linux/sched.h>
#include <asm/delay.h>
#include <asm/intrinsics.h>
#include <asm/io.h>
#include <asm/hw_irq.h>
#include <asm/tlbflush.h>
#define IRQ_DEBUG 0
#define IRQ_VECTOR_UNASSIGNED (0)
#define IRQ_UNUSED (0)
#define IRQ_USED (1)
#define IRQ_RSVD (2)
int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR;
int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR;
/* default base addr of IPI table */
void __iomem *ipi_base_addr = ((void __iomem *)
(__IA64_UNCACHED_OFFSET | IA64_IPI_DEFAULT_BASE_ADDR));
static cpumask_t vector_allocation_domain(int cpu);
/*
* Legacy IRQ to IA-64 vector translation table.
*/
__u8 isa_irq_to_vector_map[16] = {
/* 8259 IRQ translation, first 16 entries */
0x2f, 0x20, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29,
0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21
};
EXPORT_SYMBOL(isa_irq_to_vector_map);
DEFINE_SPINLOCK(vector_lock);
struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
[0 ... NR_IRQS - 1] = {
.vector = IRQ_VECTOR_UNASSIGNED,
.domain = CPU_MASK_NONE
}
};
DEFINE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq) = {
[0 ... IA64_NUM_VECTORS - 1] = -1
};
static cpumask_t vector_table[IA64_NUM_VECTORS] = {
[0 ... IA64_NUM_VECTORS - 1] = CPU_MASK_NONE
};
static int irq_status[NR_IRQS] = {
[0 ... NR_IRQS -1] = IRQ_UNUSED
};
static inline int find_unassigned_irq(void)
{
int irq;
for (irq = IA64_FIRST_DEVICE_VECTOR; irq < NR_IRQS; irq++)
if (irq_status[irq] == IRQ_UNUSED)
return irq;
return -ENOSPC;
}
static inline int find_unassigned_vector(cpumask_t domain)
{
cpumask_t mask;
int pos, vector;
cpumask_and(&mask, &domain, cpu_online_mask);
if (cpumask_empty(&mask))
return -EINVAL;
for (pos = 0; pos < IA64_NUM_DEVICE_VECTORS; pos++) {
vector = IA64_FIRST_DEVICE_VECTOR + pos;
cpumask_and(&mask, &domain, &vector_table[vector]);
if (!cpumask_empty(&mask))
continue;
return vector;
}
return -ENOSPC;
}
static int __bind_irq_vector(int irq, int vector, cpumask_t domain)
{
cpumask_t mask;
int cpu;
struct irq_cfg *cfg = &irq_cfg[irq];
BUG_ON((unsigned)irq >= NR_IRQS);
BUG_ON((unsigned)vector >= IA64_NUM_VECTORS);
cpumask_and(&mask, &domain, cpu_online_mask);
if (cpumask_empty(&mask))
return -EINVAL;
if ((cfg->vector == vector) && cpumask_equal(&cfg->domain, &domain))
return 0;
if (cfg->vector != IRQ_VECTOR_UNASSIGNED)
return -EBUSY;
for_each_cpu(cpu, &mask)
per_cpu(vector_irq, cpu)[vector] = irq;
cfg->vector = vector;
cfg->domain = domain;
irq_status[irq] = IRQ_USED;
cpumask_or(&vector_table[vector], &vector_table[vector], &domain);
return 0;
}
int bind_irq_vector(int irq, int vector, cpumask_t domain)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&vector_lock, flags);
ret = __bind_irq_vector(irq, vector, domain);
spin_unlock_irqrestore(&vector_lock, flags);
return ret;
}
static void __clear_irq_vector(int irq)
{
int vector, cpu;
cpumask_t domain;
struct irq_cfg *cfg = &irq_cfg[irq];
BUG_ON((unsigned)irq >= NR_IRQS);
BUG_ON(cfg->vector == IRQ_VECTOR_UNASSIGNED);
vector = cfg->vector;
domain = cfg->domain;
for_each_cpu_and(cpu, &cfg->domain, cpu_online_mask)
per_cpu(vector_irq, cpu)[vector] = -1;
cfg->vector = IRQ_VECTOR_UNASSIGNED;
cfg->domain = CPU_MASK_NONE;
irq_status[irq] = IRQ_UNUSED;
cpumask_andnot(&vector_table[vector], &vector_table[vector], &domain);
}
static void clear_irq_vector(int irq)
{
unsigned long flags;
spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq);
spin_unlock_irqrestore(&vector_lock, flags);
}
int
ia64_native_assign_irq_vector (int irq)
{
unsigned long flags;
int vector, cpu;
cpumask_t domain = CPU_MASK_NONE;
vector = -ENOSPC;
spin_lock_irqsave(&vector_lock, flags);
for_each_online_cpu(cpu) {
domain = vector_allocation_domain(cpu);
vector = find_unassigned_vector(domain);
if (vector >= 0)
break;
}
if (vector < 0)
goto out;
if (irq == AUTO_ASSIGN)
irq = vector;
BUG_ON(__bind_irq_vector(irq, vector, domain));
out:
spin_unlock_irqrestore(&vector_lock, flags);
return vector;
}
void
ia64_native_free_irq_vector (int vector)
{
if (vector < IA64_FIRST_DEVICE_VECTOR ||
vector > IA64_LAST_DEVICE_VECTOR)
return;
clear_irq_vector(vector);
}
int
reserve_irq_vector (int vector)
{
if (vector < IA64_FIRST_DEVICE_VECTOR ||
vector > IA64_LAST_DEVICE_VECTOR)
return -EINVAL;
return !!bind_irq_vector(vector, vector, CPU_MASK_ALL);
}
/*
* Initialize vector_irq on a new cpu. This function must be called
* with vector_lock held.
*/
void __setup_vector_irq(int cpu)
{
int irq, vector;
/* Clear vector_irq */
for (vector = 0; vector < IA64_NUM_VECTORS; ++vector)
per_cpu(vector_irq, cpu)[vector] = -1;
/* Mark the inuse vectors */
for (irq = 0; irq < NR_IRQS; ++irq) {
if (!cpumask_test_cpu(cpu, &irq_cfg[irq].domain))
continue;
vector = irq_to_vector(irq);
per_cpu(vector_irq, cpu)[vector] = irq;
}
}
#ifdef CONFIG_SMP
static enum vector_domain_type {
VECTOR_DOMAIN_NONE,
VECTOR_DOMAIN_PERCPU
} vector_domain_type = VECTOR_DOMAIN_NONE;
static cpumask_t vector_allocation_domain(int cpu)
{
if (vector_domain_type == VECTOR_DOMAIN_PERCPU)
return *cpumask_of(cpu);
return CPU_MASK_ALL;
}
static int __irq_prepare_move(int irq, int cpu)
{
struct irq_cfg *cfg = &irq_cfg[irq];
int vector;
cpumask_t domain;
if (cfg->move_in_progress || cfg->move_cleanup_count)
return -EBUSY;
if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
return -EINVAL;
if (cpumask_test_cpu(cpu, &cfg->domain))
return 0;
domain = vector_allocation_domain(cpu);
vector = find_unassigned_vector(domain);
if (vector < 0)
return -ENOSPC;
cfg->move_in_progress = 1;
cfg->old_domain = cfg->domain;
cfg->vector = IRQ_VECTOR_UNASSIGNED;
cfg->domain = CPU_MASK_NONE;
BUG_ON(__bind_irq_vector(irq, vector, domain));
return 0;
}
int irq_prepare_move(int irq, int cpu)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&vector_lock, flags);
ret = __irq_prepare_move(irq, cpu);
spin_unlock_irqrestore(&vector_lock, flags);
return ret;
}
void irq_complete_move(unsigned irq)
{
struct irq_cfg *cfg = &irq_cfg[irq];
cpumask_t cleanup_mask;
int i;
if (likely(!cfg->move_in_progress))
return;
if (unlikely(cpumask_test_cpu(smp_processor_id(), &cfg->old_domain)))
return;
cpumask_and(&cleanup_mask, &cfg->old_domain, cpu_online_mask);
cfg->move_cleanup_count = cpumask_weight(&cleanup_mask);
for_each_cpu(i, &cleanup_mask)
ia64_send_ipi(i, IA64_IRQ_MOVE_VECTOR, IA64_IPI_DM_INT, 0);
cfg->move_in_progress = 0;
}
static irqreturn_t smp_irq_move_cleanup_interrupt(int irq, void *dev_id)
{
int me = smp_processor_id();
ia64_vector vector;
unsigned long flags;
for (vector = IA64_FIRST_DEVICE_VECTOR;
vector < IA64_LAST_DEVICE_VECTOR; vector++) {
int irq;
struct irq_desc *desc;
struct irq_cfg *cfg;
ia64: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:47 +08:00
irq = __this_cpu_read(vector_irq[vector]);
if (irq < 0)
continue;
desc = irq_to_desc(irq);
cfg = irq_cfg + irq;
raw_spin_lock(&desc->lock);
if (!cfg->move_cleanup_count)
goto unlock;
if (!cpumask_test_cpu(me, &cfg->old_domain))
goto unlock;
spin_lock_irqsave(&vector_lock, flags);
ia64: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:47 +08:00
__this_cpu_write(vector_irq[vector], -1);
cpumask_clear_cpu(me, &vector_table[vector]);
spin_unlock_irqrestore(&vector_lock, flags);
cfg->move_cleanup_count--;
unlock:
raw_spin_unlock(&desc->lock);
}
return IRQ_HANDLED;
}
static int __init parse_vector_domain(char *arg)
{
if (!arg)
return -EINVAL;
if (!strcmp(arg, "percpu")) {
vector_domain_type = VECTOR_DOMAIN_PERCPU;
no_int_routing = 1;
}
return 0;
}
early_param("vector", parse_vector_domain);
#else
static cpumask_t vector_allocation_domain(int cpu)
{
return CPU_MASK_ALL;
}
#endif
void destroy_and_reserve_irq(unsigned int irq)
{
unsigned long flags;
irq_init_desc(irq);
spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq);
irq_status[irq] = IRQ_RSVD;
spin_unlock_irqrestore(&vector_lock, flags);
}
/*
* Dynamic irq allocate and deallocation for MSI
*/
int create_irq(void)
{
unsigned long flags;
int irq, vector, cpu;
cpumask_t domain = CPU_MASK_NONE;
irq = vector = -ENOSPC;
spin_lock_irqsave(&vector_lock, flags);
for_each_online_cpu(cpu) {
domain = vector_allocation_domain(cpu);
vector = find_unassigned_vector(domain);
if (vector >= 0)
break;
}
if (vector < 0)
goto out;
irq = find_unassigned_irq();
if (irq < 0)
goto out;
BUG_ON(__bind_irq_vector(irq, vector, domain));
out:
spin_unlock_irqrestore(&vector_lock, flags);
if (irq >= 0)
irq_init_desc(irq);
return irq;
}
void destroy_irq(unsigned int irq)
{
irq_init_desc(irq);
clear_irq_vector(irq);
}
#ifdef CONFIG_SMP
# define IS_RESCHEDULE(vec) (vec == IA64_IPI_RESCHEDULE)
# define IS_LOCAL_TLB_FLUSH(vec) (vec == IA64_IPI_LOCAL_TLB_FLUSH)
#else
# define IS_RESCHEDULE(vec) (0)
# define IS_LOCAL_TLB_FLUSH(vec) (0)
#endif
/*
* That's where the IVT branches when we get an external
* interrupt. This branches to the correct hardware IRQ handler via
* function ptr.
*/
void
ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
{
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
struct pt_regs *old_regs = set_irq_regs(regs);
unsigned long saved_tpr;
#if IRQ_DEBUG
{
unsigned long bsp, sp;
/*
* Note: if the interrupt happened while executing in
* the context switch routine (ia64_switch_to), we may
* get a spurious stack overflow here. This is
* because the register and the memory stack are not
* switched atomically.
*/
bsp = ia64_getreg(_IA64_REG_AR_BSP);
sp = ia64_getreg(_IA64_REG_SP);
if ((sp - bsp) < 1024) {
static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
if (__ratelimit(&ratelimit)) {
printk("ia64_handle_irq: DANGER: less than "
"1KB of free stack space!!\n"
"(bsp=0x%lx, sp=%lx)\n", bsp, sp);
}
}
}
#endif /* IRQ_DEBUG */
/*
* Always set TPR to limit maximum interrupt nesting depth to
* 16 (without this, it would be ~240, which could easily lead
* to kernel stack overflows).
*/
irq_enter();
saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
ia64_srlz_d();
while (vector != IA64_SPURIOUS_INT_VECTOR) {
int irq = local_vector_to_irq(vector);
if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
smp_local_flush_tlb();
kstat_incr_irq_this_cpu(irq);
} else if (unlikely(IS_RESCHEDULE(vector))) {
scheduler_ipi();
kstat_incr_irq_this_cpu(irq);
} else {
ia64_setreg(_IA64_REG_CR_TPR, vector);
ia64_srlz_d();
if (unlikely(irq < 0)) {
printk(KERN_ERR "%s: Unexpected interrupt "
"vector %d on CPU %d is not mapped "
"to any IRQ!\n", __func__, vector,
smp_processor_id());
} else
generic_handle_irq(irq);
/*
* Disable interrupts and send EOI:
*/
local_irq_disable();
ia64_setreg(_IA64_REG_CR_TPR, saved_tpr);
}
ia64_eoi();
vector = ia64_get_ivr();
}
/*
* This must be done *after* the ia64_eoi(). For example, the keyboard softirq
* handler needs to be able to wait for further keyboard interrupts, which can't
* come through until ia64_eoi() has been done.
*/
irq_exit();
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
set_irq_regs(old_regs);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* This function emulates a interrupt processing when a cpu is about to be
* brought down.
*/
void ia64_process_pending_intr(void)
{
ia64_vector vector;
unsigned long saved_tpr;
extern unsigned int vectors_in_migration[NR_IRQS];
vector = ia64_get_ivr();
irq_enter();
saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
ia64_srlz_d();
/*
* Perform normal interrupt style processing
*/
while (vector != IA64_SPURIOUS_INT_VECTOR) {
int irq = local_vector_to_irq(vector);
if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
smp_local_flush_tlb();
kstat_incr_irq_this_cpu(irq);
} else if (unlikely(IS_RESCHEDULE(vector))) {
kstat_incr_irq_this_cpu(irq);
} else {
struct pt_regs *old_regs = set_irq_regs(NULL);
ia64_setreg(_IA64_REG_CR_TPR, vector);
ia64_srlz_d();
/*
* Now try calling normal ia64_handle_irq as it would have got called
* from a real intr handler. Try passing null for pt_regs, hopefully
* it will work. I hope it works!.
* Probably could shared code.
*/
if (unlikely(irq < 0)) {
printk(KERN_ERR "%s: Unexpected interrupt "
"vector %d on CPU %d not being mapped "
"to any IRQ!!\n", __func__, vector,
smp_processor_id());
} else {
vectors_in_migration[irq]=0;
generic_handle_irq(irq);
}
set_irq_regs(old_regs);
/*
* Disable interrupts and send EOI
*/
local_irq_disable();
ia64_setreg(_IA64_REG_CR_TPR, saved_tpr);
}
ia64_eoi();
vector = ia64_get_ivr();
}
irq_exit();
}
#endif
#ifdef CONFIG_SMP
static irqreturn_t dummy_handler (int irq, void *dev_id)
{
BUG();
return IRQ_NONE;
}
/*
* KVM uses this interrupt to force a cpu out of guest mode
*/
#endif
void
ia64: replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Changing 'ia64_native_register_percpu_irq' decleration to include 'irq_handler_t' as an argument type in arch/ia64/include/asm/hw_irq.h was causing build error - 'unknown type name 'irq_handler_t'' This was due to below header file sequence, + include/interrupt.h + include/hardirq.h + asm/hardirq.h + include/irq.h + asm/hw_irq.h [ 'ia64_native_register_percpu_irq' declared w/ 'irq_handler_t'] [ 'irq_handler_t' typedef'ed here in 'include/interrupt.h'] 'register_percpu_irq' defined to 'ia64_native_register_percpu_irq' is the one invoked by the caller, not the latter directly. This was done to support paravirtualization which was removed around 4 years back. And 'register_percpu_irq' is invoked only inside 'arch/ia64/kernel'. So 'register_percpu_irq' define to 'ia64_native_register_percpu_irq' is removed, instead 'ia64_native_register_percpu_irq' is renamed to 'register_precpu_irq()' & it is directly invoked. Also, 'register_precpu_irq()' is declared in a new header file 'irq.h' inside 'arch/ia64/kernel/', this header file is included by C files invoking 'register_percpu_irq()'. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-03-08 20:03:49 +08:00
register_percpu_irq(ia64_vector vec, irq_handler_t handler, unsigned long flags,
const char *name)
{
unsigned int irq;
irq = vec;
BUG_ON(bind_irq_vector(irq, vec, CPU_MASK_ALL));
irq_set_status_flags(irq, IRQ_PER_CPU);
irq_set_chip(irq, &irq_type_ia64_lsapic);
ia64: replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Changing 'ia64_native_register_percpu_irq' decleration to include 'irq_handler_t' as an argument type in arch/ia64/include/asm/hw_irq.h was causing build error - 'unknown type name 'irq_handler_t'' This was due to below header file sequence, + include/interrupt.h + include/hardirq.h + asm/hardirq.h + include/irq.h + asm/hw_irq.h [ 'ia64_native_register_percpu_irq' declared w/ 'irq_handler_t'] [ 'irq_handler_t' typedef'ed here in 'include/interrupt.h'] 'register_percpu_irq' defined to 'ia64_native_register_percpu_irq' is the one invoked by the caller, not the latter directly. This was done to support paravirtualization which was removed around 4 years back. And 'register_percpu_irq' is invoked only inside 'arch/ia64/kernel'. So 'register_percpu_irq' define to 'ia64_native_register_percpu_irq' is removed, instead 'ia64_native_register_percpu_irq' is renamed to 'register_precpu_irq()' & it is directly invoked. Also, 'register_precpu_irq()' is declared in a new header file 'irq.h' inside 'arch/ia64/kernel/', this header file is included by C files invoking 'register_percpu_irq()'. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-03-08 20:03:49 +08:00
if (handler)
if (request_irq(irq, handler, flags, name, NULL))
pr_err("Failed to request irq %u (%s)\n", irq, name);
irq_set_handler(irq, handle_percpu_irq);
}
void __init
ia64_native_register_ipi(void)
{
#ifdef CONFIG_SMP
ia64: replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Changing 'ia64_native_register_percpu_irq' decleration to include 'irq_handler_t' as an argument type in arch/ia64/include/asm/hw_irq.h was causing build error - 'unknown type name 'irq_handler_t'' This was due to below header file sequence, + include/interrupt.h + include/hardirq.h + asm/hardirq.h + include/irq.h + asm/hw_irq.h [ 'ia64_native_register_percpu_irq' declared w/ 'irq_handler_t'] [ 'irq_handler_t' typedef'ed here in 'include/interrupt.h'] 'register_percpu_irq' defined to 'ia64_native_register_percpu_irq' is the one invoked by the caller, not the latter directly. This was done to support paravirtualization which was removed around 4 years back. And 'register_percpu_irq' is invoked only inside 'arch/ia64/kernel'. So 'register_percpu_irq' define to 'ia64_native_register_percpu_irq' is removed, instead 'ia64_native_register_percpu_irq' is renamed to 'register_precpu_irq()' & it is directly invoked. Also, 'register_precpu_irq()' is declared in a new header file 'irq.h' inside 'arch/ia64/kernel/', this header file is included by C files invoking 'register_percpu_irq()'. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-03-08 20:03:49 +08:00
register_percpu_irq(IA64_IPI_VECTOR, handle_IPI, 0, "IPI");
register_percpu_irq(IA64_IPI_RESCHEDULE, dummy_handler, 0, "resched");
register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, dummy_handler, 0,
"tlb_flush");
#endif
}
void __init
init_IRQ (void)
{
acpi_boot_init();
ia64_register_ipi();
ia64: replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Changing 'ia64_native_register_percpu_irq' decleration to include 'irq_handler_t' as an argument type in arch/ia64/include/asm/hw_irq.h was causing build error - 'unknown type name 'irq_handler_t'' This was due to below header file sequence, + include/interrupt.h + include/hardirq.h + asm/hardirq.h + include/irq.h + asm/hw_irq.h [ 'ia64_native_register_percpu_irq' declared w/ 'irq_handler_t'] [ 'irq_handler_t' typedef'ed here in 'include/interrupt.h'] 'register_percpu_irq' defined to 'ia64_native_register_percpu_irq' is the one invoked by the caller, not the latter directly. This was done to support paravirtualization which was removed around 4 years back. And 'register_percpu_irq' is invoked only inside 'arch/ia64/kernel'. So 'register_percpu_irq' define to 'ia64_native_register_percpu_irq' is removed, instead 'ia64_native_register_percpu_irq' is renamed to 'register_precpu_irq()' & it is directly invoked. Also, 'register_precpu_irq()' is declared in a new header file 'irq.h' inside 'arch/ia64/kernel/', this header file is included by C files invoking 'register_percpu_irq()'. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-03-08 20:03:49 +08:00
register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL, 0, NULL);
#ifdef CONFIG_SMP
ia64: replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Changing 'ia64_native_register_percpu_irq' decleration to include 'irq_handler_t' as an argument type in arch/ia64/include/asm/hw_irq.h was causing build error - 'unknown type name 'irq_handler_t'' This was due to below header file sequence, + include/interrupt.h + include/hardirq.h + asm/hardirq.h + include/irq.h + asm/hw_irq.h [ 'ia64_native_register_percpu_irq' declared w/ 'irq_handler_t'] [ 'irq_handler_t' typedef'ed here in 'include/interrupt.h'] 'register_percpu_irq' defined to 'ia64_native_register_percpu_irq' is the one invoked by the caller, not the latter directly. This was done to support paravirtualization which was removed around 4 years back. And 'register_percpu_irq' is invoked only inside 'arch/ia64/kernel'. So 'register_percpu_irq' define to 'ia64_native_register_percpu_irq' is removed, instead 'ia64_native_register_percpu_irq' is renamed to 'register_precpu_irq()' & it is directly invoked. Also, 'register_precpu_irq()' is declared in a new header file 'irq.h' inside 'arch/ia64/kernel/', this header file is included by C files invoking 'register_percpu_irq()'. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-03-08 20:03:49 +08:00
if (vector_domain_type != VECTOR_DOMAIN_NONE) {
register_percpu_irq(IA64_IRQ_MOVE_VECTOR,
smp_irq_move_cleanup_interrupt, 0,
"irq_move");
}
#endif
}
void
ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect)
{
void __iomem *ipi_addr;
unsigned long ipi_data;
unsigned long phys_cpu_id;
phys_cpu_id = cpu_physical_id(cpu);
/*
* cpu number is in 8bit ID and 8bit EID
*/
ipi_data = (delivery_mode << 8) | (vector & 0xff);
ipi_addr = ipi_base_addr + ((phys_cpu_id << 4) | ((redirect & 1) << 3));
writeq(ipi_data, ipi_addr);
}