OpenCloudOS-Kernel/drivers/net/wireless/iwlwifi/iwl-core.c

1048 lines
28 KiB
C
Raw Normal View History

/******************************************************************************
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Tomas Winkler <tomas.winkler@intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/version.h>
#include <net/mac80211.h>
struct iwl_priv; /* FIXME: remove */
#include "iwl-debug.h"
#include "iwl-eeprom.h"
#include "iwl-dev.h" /* FIXME: remove */
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-rfkill.h"
#include "iwl-power.h"
MODULE_DESCRIPTION("iwl core");
MODULE_VERSION(IWLWIFI_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
IWL_RATE_SISO_##s##M_PLCP, \
IWL_RATE_MIMO2_##s##M_PLCP,\
IWL_RATE_MIMO3_##s##M_PLCP,\
IWL_RATE_##r##M_IEEE, \
IWL_RATE_##ip##M_INDEX, \
IWL_RATE_##in##M_INDEX, \
IWL_RATE_##rp##M_INDEX, \
IWL_RATE_##rn##M_INDEX, \
IWL_RATE_##pp##M_INDEX, \
IWL_RATE_##np##M_INDEX }
/*
* Parameter order:
* rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
*
* If there isn't a valid next or previous rate then INV is used which
* maps to IWL_RATE_INVALID
*
*/
const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = {
IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
/* FIXME:RS: ^^ should be INV (legacy) */
};
EXPORT_SYMBOL(iwl4965_rates);
/* This function both allocates and initializes hw and priv. */
struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
struct ieee80211_ops *hw_ops)
{
struct iwl_priv *priv;
/* mac80211 allocates memory for this device instance, including
* space for this driver's private structure */
struct ieee80211_hw *hw =
ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
if (hw == NULL) {
IWL_ERROR("Can not allocate network device\n");
goto out;
}
priv = hw->priv;
priv->hw = hw;
out:
return hw;
}
EXPORT_SYMBOL(iwl_alloc_all);
void iwl_hw_detect(struct iwl_priv *priv)
{
priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
}
EXPORT_SYMBOL(iwl_hw_detect);
/* Tell nic where to find the "keep warm" buffer */
int iwl_kw_init(struct iwl_priv *priv)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
if (ret)
goto out;
iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG,
priv->kw.dma_addr >> 4);
iwl_release_nic_access(priv);
out:
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
int iwl_kw_alloc(struct iwl_priv *priv)
{
struct pci_dev *dev = priv->pci_dev;
struct iwl_kw *kw = &priv->kw;
kw->size = IWL_KW_SIZE;
kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr);
if (!kw->v_addr)
return -ENOMEM;
return 0;
}
/**
* iwl_kw_free - Free the "keep warm" buffer
*/
void iwl_kw_free(struct iwl_priv *priv)
{
struct pci_dev *dev = priv->pci_dev;
struct iwl_kw *kw = &priv->kw;
if (kw->v_addr) {
pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr);
memset(kw, 0, sizeof(*kw));
}
}
int iwl_hw_nic_init(struct iwl_priv *priv)
{
unsigned long flags;
struct iwl_rx_queue *rxq = &priv->rxq;
int ret;
/* nic_init */
spin_lock_irqsave(&priv->lock, flags);
priv->cfg->ops->lib->apm_ops.init(priv);
iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
spin_unlock_irqrestore(&priv->lock, flags);
ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
priv->cfg->ops->lib->apm_ops.config(priv);
/* Allocate the RX queue, or reset if it is already allocated */
if (!rxq->bd) {
ret = iwl_rx_queue_alloc(priv);
if (ret) {
IWL_ERROR("Unable to initialize Rx queue\n");
return -ENOMEM;
}
} else
iwl_rx_queue_reset(priv, rxq);
iwl_rx_replenish(priv);
iwl_rx_init(priv, rxq);
spin_lock_irqsave(&priv->lock, flags);
rxq->need_update = 1;
iwl_rx_queue_update_write_ptr(priv, rxq);
spin_unlock_irqrestore(&priv->lock, flags);
/* Allocate and init all Tx and Command queues */
ret = iwl_txq_ctx_reset(priv);
if (ret)
return ret;
set_bit(STATUS_INIT, &priv->status);
return 0;
}
EXPORT_SYMBOL(iwl_hw_nic_init);
/**
* iwlcore_clear_stations_table - Clear the driver's station table
*
* NOTE: This does not clear or otherwise alter the device's station table.
*/
void iwlcore_clear_stations_table(struct iwl_priv *priv)
{
unsigned long flags;
spin_lock_irqsave(&priv->sta_lock, flags);
priv->num_stations = 0;
memset(priv->stations, 0, sizeof(priv->stations));
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
EXPORT_SYMBOL(iwlcore_clear_stations_table);
void iwl_reset_qos(struct iwl_priv *priv)
{
u16 cw_min = 15;
u16 cw_max = 1023;
u8 aifs = 2;
u8 is_legacy = 0;
unsigned long flags;
int i;
spin_lock_irqsave(&priv->lock, flags);
priv->qos_data.qos_active = 0;
if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) {
if (priv->qos_data.qos_enable)
priv->qos_data.qos_active = 1;
if (!(priv->active_rate & 0xfff0)) {
cw_min = 31;
is_legacy = 1;
}
} else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
if (priv->qos_data.qos_enable)
priv->qos_data.qos_active = 1;
} else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
cw_min = 31;
is_legacy = 1;
}
if (priv->qos_data.qos_active)
aifs = 3;
priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
if (priv->qos_data.qos_active) {
i = 1;
priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
i = 2;
priv->qos_data.def_qos_parm.ac[i].cw_min =
cpu_to_le16((cw_min + 1) / 2 - 1);
priv->qos_data.def_qos_parm.ac[i].cw_max =
cpu_to_le16(cw_max);
priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
if (is_legacy)
priv->qos_data.def_qos_parm.ac[i].edca_txop =
cpu_to_le16(6016);
else
priv->qos_data.def_qos_parm.ac[i].edca_txop =
cpu_to_le16(3008);
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
i = 3;
priv->qos_data.def_qos_parm.ac[i].cw_min =
cpu_to_le16((cw_min + 1) / 4 - 1);
priv->qos_data.def_qos_parm.ac[i].cw_max =
cpu_to_le16((cw_max + 1) / 2 - 1);
priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
if (is_legacy)
priv->qos_data.def_qos_parm.ac[i].edca_txop =
cpu_to_le16(3264);
else
priv->qos_data.def_qos_parm.ac[i].edca_txop =
cpu_to_le16(1504);
} else {
for (i = 1; i < 4; i++) {
priv->qos_data.def_qos_parm.ac[i].cw_min =
cpu_to_le16(cw_min);
priv->qos_data.def_qos_parm.ac[i].cw_max =
cpu_to_le16(cw_max);
priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
}
}
IWL_DEBUG_QOS("set QoS to default \n");
spin_unlock_irqrestore(&priv->lock, flags);
}
EXPORT_SYMBOL(iwl_reset_qos);
#ifdef CONFIG_IWL4965_HT
#define MAX_BIT_RATE_40_MHZ 0x96; /* 150 Mbps */
#define MAX_BIT_RATE_20_MHZ 0x48; /* 72 Mbps */
static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
struct ieee80211_ht_info *ht_info,
enum ieee80211_band band)
{
u16 max_bit_rate = 0;
u8 rx_chains_num = priv->hw_params.rx_chains_num;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
ht_info->cap = 0;
memset(ht_info->supp_mcs_set, 0, 16);
ht_info->ht_supported = 1;
ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
(IWL_MIMO_PS_NONE << 2));
max_bit_rate = MAX_BIT_RATE_20_MHZ;
if (priv->hw_params.fat_channel & BIT(band)) {
ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
ht_info->supp_mcs_set[4] = 0x01;
max_bit_rate = MAX_BIT_RATE_40_MHZ;
}
if (priv->cfg->mod_params->amsdu_size_8K)
ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
ht_info->supp_mcs_set[0] = 0xFF;
if (rx_chains_num >= 2)
ht_info->supp_mcs_set[1] = 0xFF;
if (rx_chains_num >= 3)
ht_info->supp_mcs_set[2] = 0xFF;
/* Highest supported Rx data rate */
max_bit_rate *= rx_chains_num;
ht_info->supp_mcs_set[10] = (u8)(max_bit_rate & 0x00FF);
ht_info->supp_mcs_set[11] = (u8)((max_bit_rate & 0xFF00) >> 8);
/* Tx MCS capabilities */
ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
if (tx_chains_num != rx_chains_num) {
ht_info->supp_mcs_set[12] |= IEEE80211_HT_CAP_MCS_TX_RX_DIFF;
ht_info->supp_mcs_set[12] |= ((tx_chains_num - 1) << 2);
}
}
#else
static inline void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
struct ieee80211_ht_info *ht_info,
enum ieee80211_band band)
{
}
#endif /* CONFIG_IWL4965_HT */
static void iwlcore_init_hw_rates(struct iwl_priv *priv,
struct ieee80211_rate *rates)
{
int i;
for (i = 0; i < IWL_RATE_COUNT; i++) {
rates[i].bitrate = iwl4965_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
rates[i].flags = 0;
if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
/*
* If CCK != 1M then set short preamble rate flag.
*/
rates[i].flags |=
(iwl4965_rates[i].plcp == IWL_RATE_1M_PLCP) ?
0 : IEEE80211_RATE_SHORT_PREAMBLE;
}
}
}
/**
* iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
*/
static int iwlcore_init_geos(struct iwl_priv *priv)
{
struct iwl_channel_info *ch;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *channels;
struct ieee80211_channel *geo_ch;
struct ieee80211_rate *rates;
int i = 0;
if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
IWL_DEBUG_INFO("Geography modes already initialized.\n");
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
return 0;
}
channels = kzalloc(sizeof(struct ieee80211_channel) *
priv->channel_count, GFP_KERNEL);
if (!channels)
return -ENOMEM;
rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
GFP_KERNEL);
if (!rates) {
kfree(channels);
return -ENOMEM;
}
/* 5.2GHz channels start after the 2.4GHz channels */
sband = &priv->bands[IEEE80211_BAND_5GHZ];
sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
/* just OFDM */
sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ);
sband = &priv->bands[IEEE80211_BAND_2GHZ];
sband->channels = channels;
/* OFDM & CCK */
sband->bitrates = rates;
sband->n_bitrates = IWL_RATE_COUNT;
iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ);
priv->ieee_channels = channels;
priv->ieee_rates = rates;
iwlcore_init_hw_rates(priv, rates);
for (i = 0; i < priv->channel_count; i++) {
ch = &priv->channel_info[i];
/* FIXME: might be removed if scan is OK */
if (!is_channel_valid(ch))
continue;
if (is_channel_a_band(ch))
sband = &priv->bands[IEEE80211_BAND_5GHZ];
else
sband = &priv->bands[IEEE80211_BAND_2GHZ];
geo_ch = &sband->channels[sband->n_channels++];
geo_ch->center_freq =
ieee80211_channel_to_frequency(ch->channel);
geo_ch->max_power = ch->max_power_avg;
geo_ch->max_antenna_gain = 0xff;
geo_ch->hw_value = ch->channel;
if (is_channel_valid(ch)) {
if (!(ch->flags & EEPROM_CHANNEL_IBSS))
geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
if (ch->flags & EEPROM_CHANNEL_RADAR)
geo_ch->flags |= IEEE80211_CHAN_RADAR;
if (ch->max_power_avg > priv->max_channel_txpower_limit)
priv->max_channel_txpower_limit =
ch->max_power_avg;
} else {
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
/* Save flags for reg domain usage */
geo_ch->orig_flags = geo_ch->flags;
IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
ch->channel, geo_ch->center_freq,
is_channel_a_band(ch) ? "5.2" : "2.4",
geo_ch->flags & IEEE80211_CHAN_DISABLED ?
"restricted" : "valid",
geo_ch->flags);
}
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
priv->cfg->sku & IWL_SKU_A) {
printk(KERN_INFO DRV_NAME
": Incorrectly detected BG card as ABG. Please send "
"your PCI ID 0x%04X:0x%04X to maintainer.\n",
priv->pci_dev->device, priv->pci_dev->subsystem_device);
priv->cfg->sku &= ~IWL_SKU_A;
}
printk(KERN_INFO DRV_NAME
": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
priv->bands[IEEE80211_BAND_2GHZ].n_channels,
priv->bands[IEEE80211_BAND_5GHZ].n_channels);
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->bands[IEEE80211_BAND_2GHZ];
if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&priv->bands[IEEE80211_BAND_5GHZ];
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
return 0;
}
/*
* iwlcore_free_geos - undo allocations in iwlcore_init_geos
*/
void iwlcore_free_geos(struct iwl_priv *priv)
{
kfree(priv->ieee_channels);
kfree(priv->ieee_rates);
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
}
EXPORT_SYMBOL(iwlcore_free_geos);
#ifdef CONFIG_IWL4965_HT
static u8 is_single_rx_stream(struct iwl_priv *priv)
{
return !priv->current_ht_config.is_ht ||
((priv->current_ht_config.supp_mcs_set[1] == 0) &&
(priv->current_ht_config.supp_mcs_set[2] == 0)) ||
priv->ps_mode == IWL_MIMO_PS_STATIC;
}
static u8 iwl_is_channel_extension(struct iwl_priv *priv,
enum ieee80211_band band,
u16 channel, u8 extension_chan_offset)
{
const struct iwl_channel_info *ch_info;
ch_info = iwl_get_channel_info(priv, band, channel);
if (!is_channel_valid(ch_info))
return 0;
if (extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_NONE)
return 0;
if ((ch_info->fat_extension_channel == extension_chan_offset) ||
(ch_info->fat_extension_channel == HT_IE_EXT_CHANNEL_MAX))
return 1;
return 0;
}
u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
struct ieee80211_ht_info *sta_ht_inf)
{
struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
if ((!iwl_ht_conf->is_ht) ||
(iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
(iwl_ht_conf->extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_NONE))
return 0;
if (sta_ht_inf) {
if ((!sta_ht_inf->ht_supported) ||
(!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
return 0;
}
return iwl_is_channel_extension(priv, priv->band,
iwl_ht_conf->control_channel,
iwl_ht_conf->extension_chan_offset);
}
EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
{
struct iwl4965_rxon_cmd *rxon = &priv->staging_rxon;
u32 val;
if (!ht_info->is_ht)
return;
/* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */
if (iwl_is_fat_tx_allowed(priv, NULL))
rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
else
rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
if (le16_to_cpu(rxon->channel) != ht_info->control_channel) {
IWL_DEBUG_ASSOC("control diff than current %d %d\n",
le16_to_cpu(rxon->channel),
ht_info->control_channel);
rxon->channel = cpu_to_le16(ht_info->control_channel);
return;
}
/* Note: control channel is opposite of extension channel */
switch (ht_info->extension_chan_offset) {
case IWL_EXT_CHANNEL_OFFSET_ABOVE:
rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
break;
case IWL_EXT_CHANNEL_OFFSET_BELOW:
rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
break;
case IWL_EXT_CHANNEL_OFFSET_NONE:
default:
rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
break;
}
val = ht_info->ht_protection;
rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
iwl_set_rxon_chain(priv);
IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
"rxon flags 0x%X operation mode :0x%X "
"extension channel offset 0x%x "
"control chan %d\n",
ht_info->supp_mcs_set[0],
ht_info->supp_mcs_set[1],
ht_info->supp_mcs_set[2],
le32_to_cpu(rxon->flags), ht_info->ht_protection,
ht_info->extension_chan_offset,
ht_info->control_channel);
return;
}
EXPORT_SYMBOL(iwl_set_rxon_ht);
#else
static inline u8 is_single_rx_stream(struct iwl_priv *priv)
{
return 1;
}
#endif /*CONFIG_IWL4965_HT */
/*
* Determine how many receiver/antenna chains to use.
* More provides better reception via diversity. Fewer saves power.
* MIMO (dual stream) requires at least 2, but works better with 3.
* This does not determine *which* chains to use, just how many.
*/
static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
u8 *idle_state, u8 *rx_state)
{
u8 is_single = is_single_rx_stream(priv);
u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
/* # of Rx chains to use when expecting MIMO. */
if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
*rx_state = 2;
else
*rx_state = 3;
/* # Rx chains when idling and maybe trying to save power */
switch (priv->ps_mode) {
case IWL_MIMO_PS_STATIC:
case IWL_MIMO_PS_DYNAMIC:
*idle_state = (is_cam) ? 2 : 1;
break;
case IWL_MIMO_PS_NONE:
*idle_state = (is_cam) ? *rx_state : 1;
break;
default:
*idle_state = 1;
break;
}
return 0;
}
/**
* iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
*
* Selects how many and which Rx receivers/antennas/chains to use.
* This should not be used for scan command ... it puts data in wrong place.
*/
void iwl_set_rxon_chain(struct iwl_priv *priv)
{
u8 is_single = is_single_rx_stream(priv);
u8 idle_state, rx_state;
priv->staging_rxon.rx_chain = 0;
rx_state = idle_state = 3;
/* Tell uCode which antennas are actually connected.
* Before first association, we assume all antennas are connected.
* Just after first association, iwl_chain_noise_calibration()
* checks which antennas actually *are* connected. */
priv->staging_rxon.rx_chain |=
cpu_to_le16(priv->hw_params.valid_rx_ant <<
RXON_RX_CHAIN_VALID_POS);
/* How many receivers should we use? */
iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
priv->staging_rxon.rx_chain |=
cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
priv->staging_rxon.rx_chain |=
cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
if (!is_single && (rx_state >= 2) &&
!test_bit(STATUS_POWER_PMI, &priv->status))
priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
else
priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
}
EXPORT_SYMBOL(iwl_set_rxon_chain);
/**
* iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON
* @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
* @channel: Any channel valid for the requested phymode
* In addition to setting the staging RXON, priv->phymode is also set.
*
* NOTE: Does not commit to the hardware; it sets appropriate bit fields
* in the staging RXON flag structure based on the phymode
*/
int iwl_set_rxon_channel(struct iwl_priv *priv,
enum ieee80211_band band,
u16 channel)
{
if (!iwl_get_channel_info(priv, band, channel)) {
IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
channel, band);
return -EINVAL;
}
if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
(priv->band == band))
return 0;
priv->staging_rxon.channel = cpu_to_le16(channel);
if (band == IEEE80211_BAND_5GHZ)
priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
else
priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
priv->band = band;
IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
return 0;
}
EXPORT_SYMBOL(iwl_set_rxon_channel);
static void iwlcore_init_hw(struct iwl_priv *priv)
{
struct ieee80211_hw *hw = priv->hw;
hw->rate_control_algorithm = "iwl-4965-rs";
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-09 01:15:40 +08:00
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
#ifdef CONFIG_IWL4965_HT
/* Enhanced value; more queues, to support 11n aggregation */
hw->ampdu_queues = 12;
#endif /* CONFIG_IWL4965_HT */
}
static int iwlcore_init_drv(struct iwl_priv *priv)
{
int ret;
int i;
priv->retry_rate = 1;
priv->ibss_beacon = NULL;
spin_lock_init(&priv->lock);
spin_lock_init(&priv->power_data.lock);
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
spin_lock_init(&priv->lq_mngr.lock);
for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
INIT_LIST_HEAD(&priv->free_frames);
mutex_init(&priv->mutex);
/* Clear the driver's (not device's) station table */
iwlcore_clear_stations_table(priv);
priv->data_retry_limit = -1;
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
priv->band = IEEE80211_BAND_2GHZ;
priv->iw_mode = IEEE80211_IF_TYPE_STA;
priv->use_ant_b_for_management_frame = 1; /* start with ant B */
priv->ps_mode = IWL_MIMO_PS_NONE;
/* Choose which receivers/antennas to use */
iwl_set_rxon_chain(priv);
iwl_reset_qos(priv);
priv->qos_data.qos_active = 0;
priv->qos_data.qos_cap.val = 0;
iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
priv->rates_mask = IWL_RATES_MASK;
/* If power management is turned on, default to AC mode */
priv->power_mode = IWL_POWER_AC;
priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERROR("initializing regulatory failed: %d\n", ret);
goto err;
}
ret = iwlcore_init_geos(priv);
if (ret) {
IWL_ERROR("initializing geos failed: %d\n", ret);
goto err_free_channel_map;
}
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERROR("Failed to register network device (error %d)\n",
ret);
goto err_free_geos;
}
priv->hw->conf.beacon_int = 100;
priv->mac80211_registered = 1;
return 0;
err_free_geos:
iwlcore_free_geos(priv);
err_free_channel_map:
iwl_free_channel_map(priv);
err:
return ret;
}
int iwl_setup(struct iwl_priv *priv)
{
int ret = 0;
iwlcore_init_hw(priv);
ret = iwlcore_init_drv(priv);
return ret;
}
EXPORT_SYMBOL(iwl_setup);
/* Low level driver call this function to update iwlcore with
* driver status.
*/
int iwlcore_low_level_notify(struct iwl_priv *priv,
enum iwlcore_card_notify notify)
{
int ret;
switch (notify) {
case IWLCORE_INIT_EVT:
ret = iwl_rfkill_init(priv);
if (ret)
IWL_ERROR("Unable to initialize RFKILL system. "
"Ignoring error: %d\n", ret);
iwl_power_initialize(priv);
break;
case IWLCORE_START_EVT:
iwl_power_update_mode(priv, 1);
break;
case IWLCORE_STOP_EVT:
break;
case IWLCORE_REMOVE_EVT:
iwl_rfkill_unregister(priv);
break;
}
return 0;
}
EXPORT_SYMBOL(iwlcore_low_level_notify);
int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
{
u32 stat_flags = 0;
struct iwl_host_cmd cmd = {
.id = REPLY_STATISTICS_CMD,
.meta.flags = flags,
.len = sizeof(stat_flags),
.data = (u8 *) &stat_flags,
};
return iwl_send_cmd(priv, &cmd);
}
EXPORT_SYMBOL(iwl_send_statistics_request);
/**
* iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
* using sample data 100 bytes apart. If these sample points are good,
* it's a pretty good bet that everything between them is good, too.
*/
static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
{
u32 val;
int ret = 0;
u32 errcnt = 0;
u32 i;
IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
ret = iwl_grab_nic_access(priv);
if (ret)
return ret;
for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IWL_DL_IO is set */
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
i + RTC_INST_LOWER_BOUND);
val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
ret = -EIO;
errcnt++;
if (errcnt >= 3)
break;
}
}
iwl_release_nic_access(priv);
return ret;
}
/**
* iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
* looking at all data.
*/
static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
u32 len)
{
u32 val;
u32 save_len = len;
int ret = 0;
u32 errcnt;
IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
ret = iwl_grab_nic_access(priv);
if (ret)
return ret;
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
errcnt = 0;
for (; len > 0; len -= sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IWL_DL_IO is set */
val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
IWL_ERROR("uCode INST section is invalid at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",
save_len - len, val, le32_to_cpu(*image));
ret = -EIO;
errcnt++;
if (errcnt >= 20)
break;
}
}
iwl_release_nic_access(priv);
if (!errcnt)
IWL_DEBUG_INFO
("ucode image in INSTRUCTION memory is good\n");
return ret;
}
/**
* iwl_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
int iwl_verify_ucode(struct iwl_priv *priv)
{
__le32 *image;
u32 len;
int ret;
/* Try bootstrap */
image = (__le32 *)priv->ucode_boot.v_addr;
len = priv->ucode_boot.len;
ret = iwlcore_verify_inst_sparse(priv, image, len);
if (!ret) {
IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
return 0;
}
/* Try initialize */
image = (__le32 *)priv->ucode_init.v_addr;
len = priv->ucode_init.len;
ret = iwlcore_verify_inst_sparse(priv, image, len);
if (!ret) {
IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
return 0;
}
/* Try runtime/protocol */
image = (__le32 *)priv->ucode_code.v_addr;
len = priv->ucode_code.len;
ret = iwlcore_verify_inst_sparse(priv, image, len);
if (!ret) {
IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
return 0;
}
IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
/* Since nothing seems to match, show first several data entries in
* instruction SRAM, so maybe visual inspection will give a clue.
* Selection of bootstrap image (vs. other images) is arbitrary. */
image = (__le32 *)priv->ucode_boot.v_addr;
len = priv->ucode_boot.len;
ret = iwl_verify_inst_full(priv, image, len);
return ret;
}
EXPORT_SYMBOL(iwl_verify_ucode);