OpenCloudOS-Kernel/include/linux/user_namespace.h

229 lines
6.2 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_USER_NAMESPACE_H
#define _LINUX_USER_NAMESPACE_H
#include <linux/kref.h>
#include <linux/nsproxy.h>
#include <linux/ns_common.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/rwsem.h>
#include <linux/sysctl.h>
#include <linux/err.h>
userns: bump idmap limits to 340 There are quite some use cases where users run into the current limit for {g,u}id mappings. Consider a user requesting us to map everything but 999, and 1001 for a given range of 1000000000 with a sub{g,u}id layout of: some-user:100000:1000000000 some-user:999:1 some-user:1000:1 some-user:1001:1 some-user:1002:1 This translates to: MAPPING-TYPE | CONTAINER | HOST | RANGE | -------------|-----------|---------|-----------| uid | 999 | 999 | 1 | uid | 1001 | 1001 | 1 | uid | 0 | 1000000 | 999 | uid | 1000 | 1001000 | 1 | uid | 1002 | 1001002 | 999998998 | ------------------------------------------------ gid | 999 | 999 | 1 | gid | 1001 | 1001 | 1 | gid | 0 | 1000000 | 999 | gid | 1000 | 1001000 | 1 | gid | 1002 | 1001002 | 999998998 | which is already the current limit. As discussed at LPC simply bumping the number of limits is not going to work since this would mean that struct uid_gid_map won't fit into a single cache-line anymore thereby regressing performance for the base-cases. The same problem seems to arise when using a single pointer. So the idea is to use struct uid_gid_extent { u32 first; u32 lower_first; u32 count; }; struct uid_gid_map { /* 64 bytes -- 1 cache line */ u32 nr_extents; union { struct uid_gid_extent extent[UID_GID_MAP_MAX_BASE_EXTENTS]; struct { struct uid_gid_extent *forward; struct uid_gid_extent *reverse; }; }; }; For the base cases we will only use the struct uid_gid_extent extent member. If we go over UID_GID_MAP_MAX_BASE_EXTENTS mappings we perform a single 4k kmalloc() which means we can have a maximum of 340 mappings (340 * size(struct uid_gid_extent) = 4080). For the latter case we use two pointers "forward" and "reverse". The forward pointer points to an array sorted by "first" and the reverse pointer points to an array sorted by "lower_first". We can then perform binary search on those arrays. Performance Testing: When Eric introduced the extent-based struct uid_gid_map approach he measured the performanc impact of his idmap changes: > My benchmark consisted of going to single user mode where nothing else was > running. On an ext4 filesystem opening 1,000,000 files and looping through all > of the files 1000 times and calling fstat on the individuals files. This was > to ensure I was benchmarking stat times where the inodes were in the kernels > cache, but the inode values were not in the processors cache. My results: > v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) > v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) > v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) I used an identical approach on my laptop. Here's a thorough description of what I did. I built a 4.14.0-rc4 mainline kernel with my new idmap patches applied. I booted into single user mode and used an ext4 filesystem to open/create 1,000,000 files. Then I looped through all of the files calling fstat() on each of them 1000 times and calculated the mean fstat() time for a single file. (The test program can be found below.) Here are the results. For fun, I compared the first version of my patch which scaled linearly with the new version of the patch: | # MAPPINGS | PATCH-V1 | PATCH-NEW | |--------------|------------|-----------| | 0 mappings | 158 ns | 158 ns | | 1 mappings | 164 ns | 157 ns | | 2 mappings | 170 ns | 158 ns | | 3 mappings | 175 ns | 161 ns | | 5 mappings | 187 ns | 165 ns | | 10 mappings | 218 ns | 199 ns | | 50 mappings | 528 ns | 218 ns | | 100 mappings | 980 ns | 229 ns | | 200 mappings | 1880 ns | 239 ns | | 300 mappings | 2760 ns | 240 ns | | 340 mappings | not tested | 248 ns | Here's the test program I used. I asked Eric what he did and this is a more "advanced" implementation of the idea. It's pretty straight-forward: #define __GNU_SOURCE #define __STDC_FORMAT_MACROS #include <errno.h> #include <dirent.h> #include <fcntl.h> #include <inttypes.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> int main(int argc, char *argv[]) { int ret; size_t i, k; int fd[1000000]; int times[1000]; char pathname[4096]; struct stat st; struct timeval t1, t2; uint64_t time_in_mcs; uint64_t sum = 0; if (argc != 2) { fprintf(stderr, "Please specify a directory where to create " "the test files\n"); exit(EXIT_FAILURE); } for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) { sprintf(pathname, "%s/idmap_test_%zu", argv[1], i); fd[i]= open(pathname, O_RDWR | O_CREAT, S_IXUSR | S_IXGRP | S_IXOTH); if (fd[i] < 0) { ssize_t j; for (j = i; j >= 0; j--) close(fd[j]); exit(EXIT_FAILURE); } } for (k = 0; k < 1000; k++) { ret = gettimeofday(&t1, NULL); if (ret < 0) goto close_all; for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) { ret = fstat(fd[i], &st); if (ret < 0) goto close_all; } ret = gettimeofday(&t2, NULL); if (ret < 0) goto close_all; time_in_mcs = (1000000 * t2.tv_sec + t2.tv_usec) - (1000000 * t1.tv_sec + t1.tv_usec); printf("Total time in micro seconds: %" PRIu64 "\n", time_in_mcs); printf("Total time in nanoseconds: %" PRIu64 "\n", time_in_mcs * 1000); printf("Time per file in nanoseconds: %" PRIu64 "\n", (time_in_mcs * 1000) / 1000000); times[k] = (time_in_mcs * 1000) / 1000000; } close_all: for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) close(fd[i]); if (ret < 0) exit(EXIT_FAILURE); for (k = 0; k < 1000; k++) { sum += times[k]; } printf("Mean time per file in nanoseconds: %" PRIu64 "\n", sum / 1000); exit(EXIT_SUCCESS);; } Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> CC: Serge Hallyn <serge@hallyn.com> CC: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-10-25 06:04:41 +08:00
#define UID_GID_MAP_MAX_BASE_EXTENTS 5
#define UID_GID_MAP_MAX_EXTENTS 340
userns: Rework the user_namespace adding uid/gid mapping support - Convert the old uid mapping functions into compatibility wrappers - Add a uid/gid mapping layer from user space uid and gids to kernel internal uids and gids that is extent based for simplicty and speed. * Working with number space after mapping uids/gids into their kernel internal version adds only mapping complexity over what we have today, leaving the kernel code easy to understand and test. - Add proc files /proc/self/uid_map /proc/self/gid_map These files display the mapping and allow a mapping to be added if a mapping does not exist. - Allow entering the user namespace without a uid or gid mapping. Since we are starting with an existing user our uids and gids still have global mappings so are still valid and useful they just don't have local mappings. The requirement for things to work are global uid and gid so it is odd but perfectly fine not to have a local uid and gid mapping. Not requiring global uid and gid mappings greatly simplifies the logic of setting up the uid and gid mappings by allowing the mappings to be set after the namespace is created which makes the slight weirdness worth it. - Make the mappings in the initial user namespace to the global uid/gid space explicit. Today it is an identity mapping but in the future we may want to twist this for debugging, similar to what we do with jiffies. - Document the memory ordering requirements of setting the uid and gid mappings. We only allow the mappings to be set once and there are no pointers involved so the requirments are trivial but a little atypical. Performance: In this scheme for the permission checks the performance is expected to stay the same as the actuall machine instructions should remain the same. The worst case I could think of is ls -l on a large directory where all of the stat results need to be translated with from kuids and kgids to uids and gids. So I benchmarked that case on my laptop with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache. My benchmark consisted of going to single user mode where nothing else was running. On an ext4 filesystem opening 1,000,000 files and looping through all of the files 1000 times and calling fstat on the individuals files. This was to ensure I was benchmarking stat times where the inodes were in the kernels cache, but the inode values were not in the processors cache. My results: v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) All of the configurations ran in roughly 120ns when I performed tests that ran in the cpu cache. So in summary the performance impact is: 1ns improvement in the worst case with user namespace support compiled out. 8ns aka 5% slowdown in the worst case with user namespace support compiled in. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-11-17 16:11:58 +08:00
struct uid_gid_extent {
u32 first;
u32 lower_first;
u32 count;
};
userns: bump idmap limits to 340 There are quite some use cases where users run into the current limit for {g,u}id mappings. Consider a user requesting us to map everything but 999, and 1001 for a given range of 1000000000 with a sub{g,u}id layout of: some-user:100000:1000000000 some-user:999:1 some-user:1000:1 some-user:1001:1 some-user:1002:1 This translates to: MAPPING-TYPE | CONTAINER | HOST | RANGE | -------------|-----------|---------|-----------| uid | 999 | 999 | 1 | uid | 1001 | 1001 | 1 | uid | 0 | 1000000 | 999 | uid | 1000 | 1001000 | 1 | uid | 1002 | 1001002 | 999998998 | ------------------------------------------------ gid | 999 | 999 | 1 | gid | 1001 | 1001 | 1 | gid | 0 | 1000000 | 999 | gid | 1000 | 1001000 | 1 | gid | 1002 | 1001002 | 999998998 | which is already the current limit. As discussed at LPC simply bumping the number of limits is not going to work since this would mean that struct uid_gid_map won't fit into a single cache-line anymore thereby regressing performance for the base-cases. The same problem seems to arise when using a single pointer. So the idea is to use struct uid_gid_extent { u32 first; u32 lower_first; u32 count; }; struct uid_gid_map { /* 64 bytes -- 1 cache line */ u32 nr_extents; union { struct uid_gid_extent extent[UID_GID_MAP_MAX_BASE_EXTENTS]; struct { struct uid_gid_extent *forward; struct uid_gid_extent *reverse; }; }; }; For the base cases we will only use the struct uid_gid_extent extent member. If we go over UID_GID_MAP_MAX_BASE_EXTENTS mappings we perform a single 4k kmalloc() which means we can have a maximum of 340 mappings (340 * size(struct uid_gid_extent) = 4080). For the latter case we use two pointers "forward" and "reverse". The forward pointer points to an array sorted by "first" and the reverse pointer points to an array sorted by "lower_first". We can then perform binary search on those arrays. Performance Testing: When Eric introduced the extent-based struct uid_gid_map approach he measured the performanc impact of his idmap changes: > My benchmark consisted of going to single user mode where nothing else was > running. On an ext4 filesystem opening 1,000,000 files and looping through all > of the files 1000 times and calling fstat on the individuals files. This was > to ensure I was benchmarking stat times where the inodes were in the kernels > cache, but the inode values were not in the processors cache. My results: > v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) > v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) > v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) I used an identical approach on my laptop. Here's a thorough description of what I did. I built a 4.14.0-rc4 mainline kernel with my new idmap patches applied. I booted into single user mode and used an ext4 filesystem to open/create 1,000,000 files. Then I looped through all of the files calling fstat() on each of them 1000 times and calculated the mean fstat() time for a single file. (The test program can be found below.) Here are the results. For fun, I compared the first version of my patch which scaled linearly with the new version of the patch: | # MAPPINGS | PATCH-V1 | PATCH-NEW | |--------------|------------|-----------| | 0 mappings | 158 ns | 158 ns | | 1 mappings | 164 ns | 157 ns | | 2 mappings | 170 ns | 158 ns | | 3 mappings | 175 ns | 161 ns | | 5 mappings | 187 ns | 165 ns | | 10 mappings | 218 ns | 199 ns | | 50 mappings | 528 ns | 218 ns | | 100 mappings | 980 ns | 229 ns | | 200 mappings | 1880 ns | 239 ns | | 300 mappings | 2760 ns | 240 ns | | 340 mappings | not tested | 248 ns | Here's the test program I used. I asked Eric what he did and this is a more "advanced" implementation of the idea. It's pretty straight-forward: #define __GNU_SOURCE #define __STDC_FORMAT_MACROS #include <errno.h> #include <dirent.h> #include <fcntl.h> #include <inttypes.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> int main(int argc, char *argv[]) { int ret; size_t i, k; int fd[1000000]; int times[1000]; char pathname[4096]; struct stat st; struct timeval t1, t2; uint64_t time_in_mcs; uint64_t sum = 0; if (argc != 2) { fprintf(stderr, "Please specify a directory where to create " "the test files\n"); exit(EXIT_FAILURE); } for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) { sprintf(pathname, "%s/idmap_test_%zu", argv[1], i); fd[i]= open(pathname, O_RDWR | O_CREAT, S_IXUSR | S_IXGRP | S_IXOTH); if (fd[i] < 0) { ssize_t j; for (j = i; j >= 0; j--) close(fd[j]); exit(EXIT_FAILURE); } } for (k = 0; k < 1000; k++) { ret = gettimeofday(&t1, NULL); if (ret < 0) goto close_all; for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) { ret = fstat(fd[i], &st); if (ret < 0) goto close_all; } ret = gettimeofday(&t2, NULL); if (ret < 0) goto close_all; time_in_mcs = (1000000 * t2.tv_sec + t2.tv_usec) - (1000000 * t1.tv_sec + t1.tv_usec); printf("Total time in micro seconds: %" PRIu64 "\n", time_in_mcs); printf("Total time in nanoseconds: %" PRIu64 "\n", time_in_mcs * 1000); printf("Time per file in nanoseconds: %" PRIu64 "\n", (time_in_mcs * 1000) / 1000000); times[k] = (time_in_mcs * 1000) / 1000000; } close_all: for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) close(fd[i]); if (ret < 0) exit(EXIT_FAILURE); for (k = 0; k < 1000; k++) { sum += times[k]; } printf("Mean time per file in nanoseconds: %" PRIu64 "\n", sum / 1000); exit(EXIT_SUCCESS);; } Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> CC: Serge Hallyn <serge@hallyn.com> CC: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-10-25 06:04:41 +08:00
struct uid_gid_map { /* 64 bytes -- 1 cache line */
userns: Rework the user_namespace adding uid/gid mapping support - Convert the old uid mapping functions into compatibility wrappers - Add a uid/gid mapping layer from user space uid and gids to kernel internal uids and gids that is extent based for simplicty and speed. * Working with number space after mapping uids/gids into their kernel internal version adds only mapping complexity over what we have today, leaving the kernel code easy to understand and test. - Add proc files /proc/self/uid_map /proc/self/gid_map These files display the mapping and allow a mapping to be added if a mapping does not exist. - Allow entering the user namespace without a uid or gid mapping. Since we are starting with an existing user our uids and gids still have global mappings so are still valid and useful they just don't have local mappings. The requirement for things to work are global uid and gid so it is odd but perfectly fine not to have a local uid and gid mapping. Not requiring global uid and gid mappings greatly simplifies the logic of setting up the uid and gid mappings by allowing the mappings to be set after the namespace is created which makes the slight weirdness worth it. - Make the mappings in the initial user namespace to the global uid/gid space explicit. Today it is an identity mapping but in the future we may want to twist this for debugging, similar to what we do with jiffies. - Document the memory ordering requirements of setting the uid and gid mappings. We only allow the mappings to be set once and there are no pointers involved so the requirments are trivial but a little atypical. Performance: In this scheme for the permission checks the performance is expected to stay the same as the actuall machine instructions should remain the same. The worst case I could think of is ls -l on a large directory where all of the stat results need to be translated with from kuids and kgids to uids and gids. So I benchmarked that case on my laptop with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache. My benchmark consisted of going to single user mode where nothing else was running. On an ext4 filesystem opening 1,000,000 files and looping through all of the files 1000 times and calling fstat on the individuals files. This was to ensure I was benchmarking stat times where the inodes were in the kernels cache, but the inode values were not in the processors cache. My results: v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) All of the configurations ran in roughly 120ns when I performed tests that ran in the cpu cache. So in summary the performance impact is: 1ns improvement in the worst case with user namespace support compiled out. 8ns aka 5% slowdown in the worst case with user namespace support compiled in. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-11-17 16:11:58 +08:00
u32 nr_extents;
union {
userns: bump idmap limits to 340 There are quite some use cases where users run into the current limit for {g,u}id mappings. Consider a user requesting us to map everything but 999, and 1001 for a given range of 1000000000 with a sub{g,u}id layout of: some-user:100000:1000000000 some-user:999:1 some-user:1000:1 some-user:1001:1 some-user:1002:1 This translates to: MAPPING-TYPE | CONTAINER | HOST | RANGE | -------------|-----------|---------|-----------| uid | 999 | 999 | 1 | uid | 1001 | 1001 | 1 | uid | 0 | 1000000 | 999 | uid | 1000 | 1001000 | 1 | uid | 1002 | 1001002 | 999998998 | ------------------------------------------------ gid | 999 | 999 | 1 | gid | 1001 | 1001 | 1 | gid | 0 | 1000000 | 999 | gid | 1000 | 1001000 | 1 | gid | 1002 | 1001002 | 999998998 | which is already the current limit. As discussed at LPC simply bumping the number of limits is not going to work since this would mean that struct uid_gid_map won't fit into a single cache-line anymore thereby regressing performance for the base-cases. The same problem seems to arise when using a single pointer. So the idea is to use struct uid_gid_extent { u32 first; u32 lower_first; u32 count; }; struct uid_gid_map { /* 64 bytes -- 1 cache line */ u32 nr_extents; union { struct uid_gid_extent extent[UID_GID_MAP_MAX_BASE_EXTENTS]; struct { struct uid_gid_extent *forward; struct uid_gid_extent *reverse; }; }; }; For the base cases we will only use the struct uid_gid_extent extent member. If we go over UID_GID_MAP_MAX_BASE_EXTENTS mappings we perform a single 4k kmalloc() which means we can have a maximum of 340 mappings (340 * size(struct uid_gid_extent) = 4080). For the latter case we use two pointers "forward" and "reverse". The forward pointer points to an array sorted by "first" and the reverse pointer points to an array sorted by "lower_first". We can then perform binary search on those arrays. Performance Testing: When Eric introduced the extent-based struct uid_gid_map approach he measured the performanc impact of his idmap changes: > My benchmark consisted of going to single user mode where nothing else was > running. On an ext4 filesystem opening 1,000,000 files and looping through all > of the files 1000 times and calling fstat on the individuals files. This was > to ensure I was benchmarking stat times where the inodes were in the kernels > cache, but the inode values were not in the processors cache. My results: > v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) > v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) > v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) I used an identical approach on my laptop. Here's a thorough description of what I did. I built a 4.14.0-rc4 mainline kernel with my new idmap patches applied. I booted into single user mode and used an ext4 filesystem to open/create 1,000,000 files. Then I looped through all of the files calling fstat() on each of them 1000 times and calculated the mean fstat() time for a single file. (The test program can be found below.) Here are the results. For fun, I compared the first version of my patch which scaled linearly with the new version of the patch: | # MAPPINGS | PATCH-V1 | PATCH-NEW | |--------------|------------|-----------| | 0 mappings | 158 ns | 158 ns | | 1 mappings | 164 ns | 157 ns | | 2 mappings | 170 ns | 158 ns | | 3 mappings | 175 ns | 161 ns | | 5 mappings | 187 ns | 165 ns | | 10 mappings | 218 ns | 199 ns | | 50 mappings | 528 ns | 218 ns | | 100 mappings | 980 ns | 229 ns | | 200 mappings | 1880 ns | 239 ns | | 300 mappings | 2760 ns | 240 ns | | 340 mappings | not tested | 248 ns | Here's the test program I used. I asked Eric what he did and this is a more "advanced" implementation of the idea. It's pretty straight-forward: #define __GNU_SOURCE #define __STDC_FORMAT_MACROS #include <errno.h> #include <dirent.h> #include <fcntl.h> #include <inttypes.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> int main(int argc, char *argv[]) { int ret; size_t i, k; int fd[1000000]; int times[1000]; char pathname[4096]; struct stat st; struct timeval t1, t2; uint64_t time_in_mcs; uint64_t sum = 0; if (argc != 2) { fprintf(stderr, "Please specify a directory where to create " "the test files\n"); exit(EXIT_FAILURE); } for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) { sprintf(pathname, "%s/idmap_test_%zu", argv[1], i); fd[i]= open(pathname, O_RDWR | O_CREAT, S_IXUSR | S_IXGRP | S_IXOTH); if (fd[i] < 0) { ssize_t j; for (j = i; j >= 0; j--) close(fd[j]); exit(EXIT_FAILURE); } } for (k = 0; k < 1000; k++) { ret = gettimeofday(&t1, NULL); if (ret < 0) goto close_all; for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) { ret = fstat(fd[i], &st); if (ret < 0) goto close_all; } ret = gettimeofday(&t2, NULL); if (ret < 0) goto close_all; time_in_mcs = (1000000 * t2.tv_sec + t2.tv_usec) - (1000000 * t1.tv_sec + t1.tv_usec); printf("Total time in micro seconds: %" PRIu64 "\n", time_in_mcs); printf("Total time in nanoseconds: %" PRIu64 "\n", time_in_mcs * 1000); printf("Time per file in nanoseconds: %" PRIu64 "\n", (time_in_mcs * 1000) / 1000000); times[k] = (time_in_mcs * 1000) / 1000000; } close_all: for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) close(fd[i]); if (ret < 0) exit(EXIT_FAILURE); for (k = 0; k < 1000; k++) { sum += times[k]; } printf("Mean time per file in nanoseconds: %" PRIu64 "\n", sum / 1000); exit(EXIT_SUCCESS);; } Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> CC: Serge Hallyn <serge@hallyn.com> CC: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-10-25 06:04:41 +08:00
struct uid_gid_extent extent[UID_GID_MAP_MAX_BASE_EXTENTS];
struct {
struct uid_gid_extent *forward;
struct uid_gid_extent *reverse;
};
};
userns: Rework the user_namespace adding uid/gid mapping support - Convert the old uid mapping functions into compatibility wrappers - Add a uid/gid mapping layer from user space uid and gids to kernel internal uids and gids that is extent based for simplicty and speed. * Working with number space after mapping uids/gids into their kernel internal version adds only mapping complexity over what we have today, leaving the kernel code easy to understand and test. - Add proc files /proc/self/uid_map /proc/self/gid_map These files display the mapping and allow a mapping to be added if a mapping does not exist. - Allow entering the user namespace without a uid or gid mapping. Since we are starting with an existing user our uids and gids still have global mappings so are still valid and useful they just don't have local mappings. The requirement for things to work are global uid and gid so it is odd but perfectly fine not to have a local uid and gid mapping. Not requiring global uid and gid mappings greatly simplifies the logic of setting up the uid and gid mappings by allowing the mappings to be set after the namespace is created which makes the slight weirdness worth it. - Make the mappings in the initial user namespace to the global uid/gid space explicit. Today it is an identity mapping but in the future we may want to twist this for debugging, similar to what we do with jiffies. - Document the memory ordering requirements of setting the uid and gid mappings. We only allow the mappings to be set once and there are no pointers involved so the requirments are trivial but a little atypical. Performance: In this scheme for the permission checks the performance is expected to stay the same as the actuall machine instructions should remain the same. The worst case I could think of is ls -l on a large directory where all of the stat results need to be translated with from kuids and kgids to uids and gids. So I benchmarked that case on my laptop with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache. My benchmark consisted of going to single user mode where nothing else was running. On an ext4 filesystem opening 1,000,000 files and looping through all of the files 1000 times and calling fstat on the individuals files. This was to ensure I was benchmarking stat times where the inodes were in the kernels cache, but the inode values were not in the processors cache. My results: v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) All of the configurations ran in roughly 120ns when I performed tests that ran in the cpu cache. So in summary the performance impact is: 1ns improvement in the worst case with user namespace support compiled out. 8ns aka 5% slowdown in the worst case with user namespace support compiled in. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-11-17 16:11:58 +08:00
};
2014-12-03 02:27:26 +08:00
#define USERNS_SETGROUPS_ALLOWED 1UL
#define USERNS_INIT_FLAGS USERNS_SETGROUPS_ALLOWED
struct ucounts;
enum ucount_type {
UCOUNT_USER_NAMESPACES,
UCOUNT_PID_NAMESPACES,
UCOUNT_UTS_NAMESPACES,
UCOUNT_IPC_NAMESPACES,
UCOUNT_NET_NAMESPACES,
UCOUNT_MNT_NAMESPACES,
UCOUNT_CGROUP_NAMESPACES,
ns: Introduce Time Namespace Time Namespace isolates clock values. The kernel provides access to several clocks CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc. CLOCK_REALTIME System-wide clock that measures real (i.e., wall-clock) time. CLOCK_MONOTONIC Clock that cannot be set and represents monotonic time since some unspecified starting point. CLOCK_BOOTTIME Identical to CLOCK_MONOTONIC, except it also includes any time that the system is suspended. For many users, the time namespace means the ability to changes date and time in a container (CLOCK_REALTIME). Providing per namespace notions of CLOCK_REALTIME would be complex with a massive overhead, but has a dubious value. But in the context of checkpoint/restore functionality, monotonic and boottime clocks become interesting. Both clocks are monotonic with unspecified starting points. These clocks are widely used to measure time slices and set timers. After restoring or migrating processes, it has to be guaranteed that they never go backward. In an ideal case, the behavior of these clocks should be the same as for a case when a whole system is suspended. All this means that it is required to set CLOCK_MONOTONIC and CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace offsets for clocks. A time namespace is similar to a pid namespace in the way how it is created: unshare(CLONE_NEWTIME) system call creates a new time namespace, but doesn't set it to the current process. Then all children of the process will be born in the new time namespace, or a process can use the setns() system call to join a namespace. This scheme allows setting clock offsets for a namespace, before any processes appear in it. All available clone flags have been used, so CLONE_NEWTIME uses the highest bit of CSIGNAL. It means that it can be used only with the unshare() and the clone3() system calls. [ tglx: Adjusted paragraph about clone3() to reality and massaged the changelog a bit. ] Co-developed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://criu.org/Time_namespace Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com
2019-11-12 09:26:52 +08:00
UCOUNT_TIME_NAMESPACES,
#ifdef CONFIG_INOTIFY_USER
UCOUNT_INOTIFY_INSTANCES,
UCOUNT_INOTIFY_WATCHES,
fanotify: configurable limits via sysfs fanotify has some hardcoded limits. The only APIs to escape those limits are FAN_UNLIMITED_QUEUE and FAN_UNLIMITED_MARKS. Allow finer grained tuning of the system limits via sysfs tunables under /proc/sys/fs/fanotify, similar to tunables under /proc/sys/fs/inotify, with some minor differences. - max_queued_events - global system tunable for group queue size limit. Like the inotify tunable with the same name, it defaults to 16384 and applies on initialization of a new group. - max_user_marks - user ns tunable for marks limit per user. Like the inotify tunable named max_user_watches, on a machine with sufficient RAM and it defaults to 1048576 in init userns and can be further limited per containing user ns. - max_user_groups - user ns tunable for number of groups per user. Like the inotify tunable named max_user_instances, it defaults to 128 in init userns and can be further limited per containing user ns. The slightly different tunable names used for fanotify are derived from the "group" and "mark" terminology used in the fanotify man pages and throughout the code. Considering the fact that the default value for max_user_instances was increased in kernel v5.10 from 8192 to 1048576, leaving the legacy fanotify limit of 8192 marks per group in addition to the max_user_marks limit makes little sense, so the per group marks limit has been removed. Note that when a group is initialized with FAN_UNLIMITED_MARKS, its own marks are not accounted in the per user marks account, so in effect the limit of max_user_marks is only for the collection of groups that are not initialized with FAN_UNLIMITED_MARKS. Link: https://lore.kernel.org/r/20210304112921.3996419-2-amir73il@gmail.com Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-03-04 19:29:20 +08:00
#endif
#ifdef CONFIG_FANOTIFY
UCOUNT_FANOTIFY_GROUPS,
UCOUNT_FANOTIFY_MARKS,
#endif
UCOUNT_COUNTS,
};
enum rlimit_type {
UCOUNT_RLIMIT_NPROC,
UCOUNT_RLIMIT_MSGQUEUE,
UCOUNT_RLIMIT_SIGPENDING,
UCOUNT_RLIMIT_MEMLOCK,
UCOUNT_RLIMIT_COUNTS,
};
struct user_namespace {
userns: Rework the user_namespace adding uid/gid mapping support - Convert the old uid mapping functions into compatibility wrappers - Add a uid/gid mapping layer from user space uid and gids to kernel internal uids and gids that is extent based for simplicty and speed. * Working with number space after mapping uids/gids into their kernel internal version adds only mapping complexity over what we have today, leaving the kernel code easy to understand and test. - Add proc files /proc/self/uid_map /proc/self/gid_map These files display the mapping and allow a mapping to be added if a mapping does not exist. - Allow entering the user namespace without a uid or gid mapping. Since we are starting with an existing user our uids and gids still have global mappings so are still valid and useful they just don't have local mappings. The requirement for things to work are global uid and gid so it is odd but perfectly fine not to have a local uid and gid mapping. Not requiring global uid and gid mappings greatly simplifies the logic of setting up the uid and gid mappings by allowing the mappings to be set after the namespace is created which makes the slight weirdness worth it. - Make the mappings in the initial user namespace to the global uid/gid space explicit. Today it is an identity mapping but in the future we may want to twist this for debugging, similar to what we do with jiffies. - Document the memory ordering requirements of setting the uid and gid mappings. We only allow the mappings to be set once and there are no pointers involved so the requirments are trivial but a little atypical. Performance: In this scheme for the permission checks the performance is expected to stay the same as the actuall machine instructions should remain the same. The worst case I could think of is ls -l on a large directory where all of the stat results need to be translated with from kuids and kgids to uids and gids. So I benchmarked that case on my laptop with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache. My benchmark consisted of going to single user mode where nothing else was running. On an ext4 filesystem opening 1,000,000 files and looping through all of the files 1000 times and calling fstat on the individuals files. This was to ensure I was benchmarking stat times where the inodes were in the kernels cache, but the inode values were not in the processors cache. My results: v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) All of the configurations ran in roughly 120ns when I performed tests that ran in the cpu cache. So in summary the performance impact is: 1ns improvement in the worst case with user namespace support compiled out. 8ns aka 5% slowdown in the worst case with user namespace support compiled in. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-11-17 16:11:58 +08:00
struct uid_gid_map uid_map;
struct uid_gid_map gid_map;
struct uid_gid_map projid_map;
struct user_namespace *parent;
int level;
kuid_t owner;
kgid_t group;
struct ns_common ns;
2014-12-03 02:27:26 +08:00
unsigned long flags;
capabilities: require CAP_SETFCAP to map uid 0 cap_setfcap is required to create file capabilities. Since commit 8db6c34f1dbc ("Introduce v3 namespaced file capabilities"), a process running as uid 0 but without cap_setfcap is able to work around this as follows: unshare a new user namespace which maps parent uid 0 into the child namespace. While this task will not have new capabilities against the parent namespace, there is a loophole due to the way namespaced file capabilities are represented as xattrs. File capabilities valid in userns 1 are distinguished from file capabilities valid in userns 2 by the kuid which underlies uid 0. Therefore the restricted root process can unshare a new self-mapping namespace, add a namespaced file capability onto a file, then use that file capability in the parent namespace. To prevent that, do not allow mapping parent uid 0 if the process which opened the uid_map file does not have CAP_SETFCAP, which is the capability for setting file capabilities. As a further wrinkle: a task can unshare its user namespace, then open its uid_map file itself, and map (only) its own uid. In this case we do not have the credential from before unshare, which was potentially more restricted. So, when creating a user namespace, we record whether the creator had CAP_SETFCAP. Then we can use that during map_write(). With this patch: 1. Unprivileged user can still unshare -Ur ubuntu@caps:~$ unshare -Ur root@caps:~# logout 2. Root user can still unshare -Ur ubuntu@caps:~$ sudo bash root@caps:/home/ubuntu# unshare -Ur root@caps:/home/ubuntu# logout 3. Root user without CAP_SETFCAP cannot unshare -Ur: root@caps:/home/ubuntu# /sbin/capsh --drop=cap_setfcap -- root@caps:/home/ubuntu# /sbin/setcap cap_setfcap=p /sbin/setcap unable to set CAP_SETFCAP effective capability: Operation not permitted root@caps:/home/ubuntu# unshare -Ur unshare: write failed /proc/self/uid_map: Operation not permitted Note: an alternative solution would be to allow uid 0 mappings by processes without CAP_SETFCAP, but to prevent such a namespace from writing any file capabilities. This approach can be seen at [1]. Background history: commit 95ebabde382 ("capabilities: Don't allow writing ambiguous v3 file capabilities") tried to fix the issue by preventing v3 fscaps to be written to disk when the root uid would map to the same uid in nested user namespaces. This led to regressions for various workloads. For example, see [2]. Ultimately this is a valid use-case we have to support meaning we had to revert this change in 3b0c2d3eaa83 ("Revert 95ebabde382c ("capabilities: Don't allow writing ambiguous v3 file capabilities")"). Link: https://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git/log/?h=2021-04-15/setfcap-nsfscaps-v4 [1] Link: https://github.com/containers/buildah/issues/3071 [2] Signed-off-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Andrew G. Morgan <morgan@kernel.org> Tested-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Tested-by: Giuseppe Scrivano <gscrivan@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-20 21:43:34 +08:00
/* parent_could_setfcap: true if the creator if this ns had CAP_SETFCAP
* in its effective capability set at the child ns creation time. */
bool parent_could_setfcap;
KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches Add support for per-user_namespace registers of persistent per-UID kerberos caches held within the kernel. This allows the kerberos cache to be retained beyond the life of all a user's processes so that the user's cron jobs can work. The kerberos cache is envisioned as a keyring/key tree looking something like: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 big_key - A ccache blob \___ tkt12345 big_key - Another ccache blob Or possibly: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 keyring - A ccache \___ krbtgt/REDHAT.COM@REDHAT.COM big_key \___ http/REDHAT.COM@REDHAT.COM user \___ afs/REDHAT.COM@REDHAT.COM user \___ nfs/REDHAT.COM@REDHAT.COM user \___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key \___ http/KERNEL.ORG@KERNEL.ORG big_key What goes into a particular Kerberos cache is entirely up to userspace. Kernel support is limited to giving you the Kerberos cache keyring that you want. The user asks for their Kerberos cache by: krb_cache = keyctl_get_krbcache(uid, dest_keyring); The uid is -1 or the user's own UID for the user's own cache or the uid of some other user's cache (requires CAP_SETUID). This permits rpc.gssd or whatever to mess with the cache. The cache returned is a keyring named "_krb.<uid>" that the possessor can read, search, clear, invalidate, unlink from and add links to. Active LSMs get a chance to rule on whether the caller is permitted to make a link. Each uid's cache keyring is created when it first accessed and is given a timeout that is extended each time this function is called so that the keyring goes away after a while. The timeout is configurable by sysctl but defaults to three days. Each user_namespace struct gets a lazily-created keyring that serves as the register. The cache keyrings are added to it. This means that standard key search and garbage collection facilities are available. The user_namespace struct's register goes away when it does and anything left in it is then automatically gc'd. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Simo Sorce <simo@redhat.com> cc: Serge E. Hallyn <serge.hallyn@ubuntu.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2013-09-24 17:35:19 +08:00
#ifdef CONFIG_KEYS
/* List of joinable keyrings in this namespace. Modification access of
* these pointers is controlled by keyring_sem. Once
* user_keyring_register is set, it won't be changed, so it can be
* accessed directly with READ_ONCE().
*/
struct list_head keyring_name_list;
struct key *user_keyring_register;
struct rw_semaphore keyring_sem;
#endif
KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches Add support for per-user_namespace registers of persistent per-UID kerberos caches held within the kernel. This allows the kerberos cache to be retained beyond the life of all a user's processes so that the user's cron jobs can work. The kerberos cache is envisioned as a keyring/key tree looking something like: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 big_key - A ccache blob \___ tkt12345 big_key - Another ccache blob Or possibly: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 keyring - A ccache \___ krbtgt/REDHAT.COM@REDHAT.COM big_key \___ http/REDHAT.COM@REDHAT.COM user \___ afs/REDHAT.COM@REDHAT.COM user \___ nfs/REDHAT.COM@REDHAT.COM user \___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key \___ http/KERNEL.ORG@KERNEL.ORG big_key What goes into a particular Kerberos cache is entirely up to userspace. Kernel support is limited to giving you the Kerberos cache keyring that you want. The user asks for their Kerberos cache by: krb_cache = keyctl_get_krbcache(uid, dest_keyring); The uid is -1 or the user's own UID for the user's own cache or the uid of some other user's cache (requires CAP_SETUID). This permits rpc.gssd or whatever to mess with the cache. The cache returned is a keyring named "_krb.<uid>" that the possessor can read, search, clear, invalidate, unlink from and add links to. Active LSMs get a chance to rule on whether the caller is permitted to make a link. Each uid's cache keyring is created when it first accessed and is given a timeout that is extended each time this function is called so that the keyring goes away after a while. The timeout is configurable by sysctl but defaults to three days. Each user_namespace struct gets a lazily-created keyring that serves as the register. The cache keyrings are added to it. This means that standard key search and garbage collection facilities are available. The user_namespace struct's register goes away when it does and anything left in it is then automatically gc'd. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Simo Sorce <simo@redhat.com> cc: Serge E. Hallyn <serge.hallyn@ubuntu.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2013-09-24 17:35:19 +08:00
/* Register of per-UID persistent keyrings for this namespace */
#ifdef CONFIG_PERSISTENT_KEYRINGS
struct key *persistent_keyring_register;
#endif
struct work_struct work;
#ifdef CONFIG_SYSCTL
struct ctl_table_set set;
struct ctl_table_header *sysctls;
#endif
struct ucounts *ucounts;
long ucount_max[UCOUNT_COUNTS];
long rlimit_max[UCOUNT_RLIMIT_COUNTS];
} __randomize_layout;
struct ucounts {
struct hlist_node node;
struct user_namespace *ns;
kuid_t uid;
atomic_t count;
atomic_long_t ucount[UCOUNT_COUNTS];
atomic_long_t rlimit[UCOUNT_RLIMIT_COUNTS];
};
extern struct user_namespace init_user_ns;
extern struct ucounts init_ucounts;
bool setup_userns_sysctls(struct user_namespace *ns);
void retire_userns_sysctls(struct user_namespace *ns);
struct ucounts *inc_ucount(struct user_namespace *ns, kuid_t uid, enum ucount_type type);
void dec_ucount(struct ucounts *ucounts, enum ucount_type type);
struct ucounts *alloc_ucounts(struct user_namespace *ns, kuid_t uid);
struct ucounts * __must_check get_ucounts(struct ucounts *ucounts);
void put_ucounts(struct ucounts *ucounts);
static inline long get_rlimit_value(struct ucounts *ucounts, enum rlimit_type type)
{
return atomic_long_read(&ucounts->rlimit[type]);
}
long inc_rlimit_ucounts(struct ucounts *ucounts, enum rlimit_type type, long v);
bool dec_rlimit_ucounts(struct ucounts *ucounts, enum rlimit_type type, long v);
long inc_rlimit_get_ucounts(struct ucounts *ucounts, enum rlimit_type type);
void dec_rlimit_put_ucounts(struct ucounts *ucounts, enum rlimit_type type);
bool is_rlimit_overlimit(struct ucounts *ucounts, enum rlimit_type type, unsigned long max);
static inline long get_userns_rlimit_max(struct user_namespace *ns, enum rlimit_type type)
{
return READ_ONCE(ns->rlimit_max[type]);
}
static inline void set_userns_rlimit_max(struct user_namespace *ns,
enum rlimit_type type, unsigned long max)
{
ns->rlimit_max[type] = max <= LONG_MAX ? max : LONG_MAX;
}
#ifdef CONFIG_USER_NS
static inline struct user_namespace *get_user_ns(struct user_namespace *ns)
{
if (ns)
user: Use generic ns_common::count Switch over user namespaces to use the newly introduced common lifetime counter. Currently every namespace type has its own lifetime counter which is stored in the specific namespace struct. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This introduces a common lifetime counter into struct ns_common. The ns_common struct encompasses information that all namespaces share. That should include the lifetime counter since its common for all of them. It also allows us to unify the type of the counters across all namespaces. Most of them use refcount_t but one uses atomic_t and at least one uses kref. Especially the last one doesn't make much sense since it's just a wrapper around refcount_t since 2016 and actually complicates cleanup operations by having to use container_of() to cast the correct namespace struct out of struct ns_common. Having the lifetime counter for the namespaces in one place reduces maintenance cost. Not just because after switching all namespaces over we will have removed more code than we added but also because the logic is more easily understandable and we indicate to the user that the basic lifetime requirements for all namespaces are currently identical. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/159644979754.604812.601625186726406922.stgit@localhost.localdomain Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-08-03 18:16:37 +08:00
refcount_inc(&ns->ns.count);
return ns;
}
User namespaces: set of cleanups (v2) The user_ns is moved from nsproxy to user_struct, so that a struct cred by itself is sufficient to determine access (which it otherwise would not be). Corresponding ecryptfs fixes (by David Howells) are here as well. Fix refcounting. The following rules now apply: 1. The task pins the user struct. 2. The user struct pins its user namespace. 3. The user namespace pins the struct user which created it. User namespaces are cloned during copy_creds(). Unsharing a new user_ns is no longer possible. (We could re-add that, but it'll cause code duplication and doesn't seem useful if PAM doesn't need to clone user namespaces). When a user namespace is created, its first user (uid 0) gets empty keyrings and a clean group_info. This incorporates a previous patch by David Howells. Here is his original patch description: >I suggest adding the attached incremental patch. It makes the following >changes: > > (1) Provides a current_user_ns() macro to wrap accesses to current's user > namespace. > > (2) Fixes eCryptFS. > > (3) Renames create_new_userns() to create_user_ns() to be more consistent > with the other associated functions and because the 'new' in the name is > superfluous. > > (4) Moves the argument and permission checks made for CLONE_NEWUSER to the > beginning of do_fork() so that they're done prior to making any attempts > at allocation. > > (5) Calls create_user_ns() after prepare_creds(), and gives it the new creds > to fill in rather than have it return the new root user. I don't imagine > the new root user being used for anything other than filling in a cred > struct. > > This also permits me to get rid of a get_uid() and a free_uid(), as the > reference the creds were holding on the old user_struct can just be > transferred to the new namespace's creator pointer. > > (6) Makes create_user_ns() reset the UIDs and GIDs of the creds under > preparation rather than doing it in copy_creds(). > >David >Signed-off-by: David Howells <dhowells@redhat.com> Changelog: Oct 20: integrate dhowells comments 1. leave thread_keyring alone 2. use current_user_ns() in set_user() Signed-off-by: Serge Hallyn <serue@us.ibm.com>
2008-10-16 05:38:45 +08:00
extern int create_user_ns(struct cred *new);
extern int unshare_userns(unsigned long unshare_flags, struct cred **new_cred);
extern void __put_user_ns(struct user_namespace *ns);
static inline void put_user_ns(struct user_namespace *ns)
{
user: Use generic ns_common::count Switch over user namespaces to use the newly introduced common lifetime counter. Currently every namespace type has its own lifetime counter which is stored in the specific namespace struct. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This introduces a common lifetime counter into struct ns_common. The ns_common struct encompasses information that all namespaces share. That should include the lifetime counter since its common for all of them. It also allows us to unify the type of the counters across all namespaces. Most of them use refcount_t but one uses atomic_t and at least one uses kref. Especially the last one doesn't make much sense since it's just a wrapper around refcount_t since 2016 and actually complicates cleanup operations by having to use container_of() to cast the correct namespace struct out of struct ns_common. Having the lifetime counter for the namespaces in one place reduces maintenance cost. Not just because after switching all namespaces over we will have removed more code than we added but also because the logic is more easily understandable and we indicate to the user that the basic lifetime requirements for all namespaces are currently identical. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/159644979754.604812.601625186726406922.stgit@localhost.localdomain Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-08-03 18:16:37 +08:00
if (ns && refcount_dec_and_test(&ns->ns.count))
__put_user_ns(ns);
}
userns: Rework the user_namespace adding uid/gid mapping support - Convert the old uid mapping functions into compatibility wrappers - Add a uid/gid mapping layer from user space uid and gids to kernel internal uids and gids that is extent based for simplicty and speed. * Working with number space after mapping uids/gids into their kernel internal version adds only mapping complexity over what we have today, leaving the kernel code easy to understand and test. - Add proc files /proc/self/uid_map /proc/self/gid_map These files display the mapping and allow a mapping to be added if a mapping does not exist. - Allow entering the user namespace without a uid or gid mapping. Since we are starting with an existing user our uids and gids still have global mappings so are still valid and useful they just don't have local mappings. The requirement for things to work are global uid and gid so it is odd but perfectly fine not to have a local uid and gid mapping. Not requiring global uid and gid mappings greatly simplifies the logic of setting up the uid and gid mappings by allowing the mappings to be set after the namespace is created which makes the slight weirdness worth it. - Make the mappings in the initial user namespace to the global uid/gid space explicit. Today it is an identity mapping but in the future we may want to twist this for debugging, similar to what we do with jiffies. - Document the memory ordering requirements of setting the uid and gid mappings. We only allow the mappings to be set once and there are no pointers involved so the requirments are trivial but a little atypical. Performance: In this scheme for the permission checks the performance is expected to stay the same as the actuall machine instructions should remain the same. The worst case I could think of is ls -l on a large directory where all of the stat results need to be translated with from kuids and kgids to uids and gids. So I benchmarked that case on my laptop with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache. My benchmark consisted of going to single user mode where nothing else was running. On an ext4 filesystem opening 1,000,000 files and looping through all of the files 1000 times and calling fstat on the individuals files. This was to ensure I was benchmarking stat times where the inodes were in the kernels cache, but the inode values were not in the processors cache. My results: v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) All of the configurations ran in roughly 120ns when I performed tests that ran in the cpu cache. So in summary the performance impact is: 1ns improvement in the worst case with user namespace support compiled out. 8ns aka 5% slowdown in the worst case with user namespace support compiled in. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-11-17 16:11:58 +08:00
struct seq_operations;
extern const struct seq_operations proc_uid_seq_operations;
extern const struct seq_operations proc_gid_seq_operations;
extern const struct seq_operations proc_projid_seq_operations;
userns: Rework the user_namespace adding uid/gid mapping support - Convert the old uid mapping functions into compatibility wrappers - Add a uid/gid mapping layer from user space uid and gids to kernel internal uids and gids that is extent based for simplicty and speed. * Working with number space after mapping uids/gids into their kernel internal version adds only mapping complexity over what we have today, leaving the kernel code easy to understand and test. - Add proc files /proc/self/uid_map /proc/self/gid_map These files display the mapping and allow a mapping to be added if a mapping does not exist. - Allow entering the user namespace without a uid or gid mapping. Since we are starting with an existing user our uids and gids still have global mappings so are still valid and useful they just don't have local mappings. The requirement for things to work are global uid and gid so it is odd but perfectly fine not to have a local uid and gid mapping. Not requiring global uid and gid mappings greatly simplifies the logic of setting up the uid and gid mappings by allowing the mappings to be set after the namespace is created which makes the slight weirdness worth it. - Make the mappings in the initial user namespace to the global uid/gid space explicit. Today it is an identity mapping but in the future we may want to twist this for debugging, similar to what we do with jiffies. - Document the memory ordering requirements of setting the uid and gid mappings. We only allow the mappings to be set once and there are no pointers involved so the requirments are trivial but a little atypical. Performance: In this scheme for the permission checks the performance is expected to stay the same as the actuall machine instructions should remain the same. The worst case I could think of is ls -l on a large directory where all of the stat results need to be translated with from kuids and kgids to uids and gids. So I benchmarked that case on my laptop with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache. My benchmark consisted of going to single user mode where nothing else was running. On an ext4 filesystem opening 1,000,000 files and looping through all of the files 1000 times and calling fstat on the individuals files. This was to ensure I was benchmarking stat times where the inodes were in the kernels cache, but the inode values were not in the processors cache. My results: v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) All of the configurations ran in roughly 120ns when I performed tests that ran in the cpu cache. So in summary the performance impact is: 1ns improvement in the worst case with user namespace support compiled out. 8ns aka 5% slowdown in the worst case with user namespace support compiled in. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-11-17 16:11:58 +08:00
extern ssize_t proc_uid_map_write(struct file *, const char __user *, size_t, loff_t *);
extern ssize_t proc_gid_map_write(struct file *, const char __user *, size_t, loff_t *);
extern ssize_t proc_projid_map_write(struct file *, const char __user *, size_t, loff_t *);
2014-12-03 02:27:26 +08:00
extern ssize_t proc_setgroups_write(struct file *, const char __user *, size_t, loff_t *);
extern int proc_setgroups_show(struct seq_file *m, void *v);
extern bool userns_may_setgroups(const struct user_namespace *ns);
extern bool in_userns(const struct user_namespace *ancestor,
const struct user_namespace *child);
extern bool current_in_userns(const struct user_namespace *target_ns);
struct ns_common *ns_get_owner(struct ns_common *ns);
#else
static inline struct user_namespace *get_user_ns(struct user_namespace *ns)
{
return &init_user_ns;
}
User namespaces: set of cleanups (v2) The user_ns is moved from nsproxy to user_struct, so that a struct cred by itself is sufficient to determine access (which it otherwise would not be). Corresponding ecryptfs fixes (by David Howells) are here as well. Fix refcounting. The following rules now apply: 1. The task pins the user struct. 2. The user struct pins its user namespace. 3. The user namespace pins the struct user which created it. User namespaces are cloned during copy_creds(). Unsharing a new user_ns is no longer possible. (We could re-add that, but it'll cause code duplication and doesn't seem useful if PAM doesn't need to clone user namespaces). When a user namespace is created, its first user (uid 0) gets empty keyrings and a clean group_info. This incorporates a previous patch by David Howells. Here is his original patch description: >I suggest adding the attached incremental patch. It makes the following >changes: > > (1) Provides a current_user_ns() macro to wrap accesses to current's user > namespace. > > (2) Fixes eCryptFS. > > (3) Renames create_new_userns() to create_user_ns() to be more consistent > with the other associated functions and because the 'new' in the name is > superfluous. > > (4) Moves the argument and permission checks made for CLONE_NEWUSER to the > beginning of do_fork() so that they're done prior to making any attempts > at allocation. > > (5) Calls create_user_ns() after prepare_creds(), and gives it the new creds > to fill in rather than have it return the new root user. I don't imagine > the new root user being used for anything other than filling in a cred > struct. > > This also permits me to get rid of a get_uid() and a free_uid(), as the > reference the creds were holding on the old user_struct can just be > transferred to the new namespace's creator pointer. > > (6) Makes create_user_ns() reset the UIDs and GIDs of the creds under > preparation rather than doing it in copy_creds(). > >David >Signed-off-by: David Howells <dhowells@redhat.com> Changelog: Oct 20: integrate dhowells comments 1. leave thread_keyring alone 2. use current_user_ns() in set_user() Signed-off-by: Serge Hallyn <serue@us.ibm.com>
2008-10-16 05:38:45 +08:00
static inline int create_user_ns(struct cred *new)
{
User namespaces: set of cleanups (v2) The user_ns is moved from nsproxy to user_struct, so that a struct cred by itself is sufficient to determine access (which it otherwise would not be). Corresponding ecryptfs fixes (by David Howells) are here as well. Fix refcounting. The following rules now apply: 1. The task pins the user struct. 2. The user struct pins its user namespace. 3. The user namespace pins the struct user which created it. User namespaces are cloned during copy_creds(). Unsharing a new user_ns is no longer possible. (We could re-add that, but it'll cause code duplication and doesn't seem useful if PAM doesn't need to clone user namespaces). When a user namespace is created, its first user (uid 0) gets empty keyrings and a clean group_info. This incorporates a previous patch by David Howells. Here is his original patch description: >I suggest adding the attached incremental patch. It makes the following >changes: > > (1) Provides a current_user_ns() macro to wrap accesses to current's user > namespace. > > (2) Fixes eCryptFS. > > (3) Renames create_new_userns() to create_user_ns() to be more consistent > with the other associated functions and because the 'new' in the name is > superfluous. > > (4) Moves the argument and permission checks made for CLONE_NEWUSER to the > beginning of do_fork() so that they're done prior to making any attempts > at allocation. > > (5) Calls create_user_ns() after prepare_creds(), and gives it the new creds > to fill in rather than have it return the new root user. I don't imagine > the new root user being used for anything other than filling in a cred > struct. > > This also permits me to get rid of a get_uid() and a free_uid(), as the > reference the creds were holding on the old user_struct can just be > transferred to the new namespace's creator pointer. > > (6) Makes create_user_ns() reset the UIDs and GIDs of the creds under > preparation rather than doing it in copy_creds(). > >David >Signed-off-by: David Howells <dhowells@redhat.com> Changelog: Oct 20: integrate dhowells comments 1. leave thread_keyring alone 2. use current_user_ns() in set_user() Signed-off-by: Serge Hallyn <serue@us.ibm.com>
2008-10-16 05:38:45 +08:00
return -EINVAL;
}
static inline int unshare_userns(unsigned long unshare_flags,
struct cred **new_cred)
{
if (unshare_flags & CLONE_NEWUSER)
return -EINVAL;
return 0;
}
static inline void put_user_ns(struct user_namespace *ns)
{
}
static inline bool userns_may_setgroups(const struct user_namespace *ns)
{
return true;
}
static inline bool in_userns(const struct user_namespace *ancestor,
const struct user_namespace *child)
{
return true;
}
static inline bool current_in_userns(const struct user_namespace *target_ns)
{
return true;
}
static inline struct ns_common *ns_get_owner(struct ns_common *ns)
{
return ERR_PTR(-EPERM);
}
userns: Rework the user_namespace adding uid/gid mapping support - Convert the old uid mapping functions into compatibility wrappers - Add a uid/gid mapping layer from user space uid and gids to kernel internal uids and gids that is extent based for simplicty and speed. * Working with number space after mapping uids/gids into their kernel internal version adds only mapping complexity over what we have today, leaving the kernel code easy to understand and test. - Add proc files /proc/self/uid_map /proc/self/gid_map These files display the mapping and allow a mapping to be added if a mapping does not exist. - Allow entering the user namespace without a uid or gid mapping. Since we are starting with an existing user our uids and gids still have global mappings so are still valid and useful they just don't have local mappings. The requirement for things to work are global uid and gid so it is odd but perfectly fine not to have a local uid and gid mapping. Not requiring global uid and gid mappings greatly simplifies the logic of setting up the uid and gid mappings by allowing the mappings to be set after the namespace is created which makes the slight weirdness worth it. - Make the mappings in the initial user namespace to the global uid/gid space explicit. Today it is an identity mapping but in the future we may want to twist this for debugging, similar to what we do with jiffies. - Document the memory ordering requirements of setting the uid and gid mappings. We only allow the mappings to be set once and there are no pointers involved so the requirments are trivial but a little atypical. Performance: In this scheme for the permission checks the performance is expected to stay the same as the actuall machine instructions should remain the same. The worst case I could think of is ls -l on a large directory where all of the stat results need to be translated with from kuids and kgids to uids and gids. So I benchmarked that case on my laptop with a dual core hyperthread Intel i5-2520M cpu with 3M of cpu cache. My benchmark consisted of going to single user mode where nothing else was running. On an ext4 filesystem opening 1,000,000 files and looping through all of the files 1000 times and calling fstat on the individuals files. This was to ensure I was benchmarking stat times where the inodes were in the kernels cache, but the inode values were not in the processors cache. My results: v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled) v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled) v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled) All of the configurations ran in roughly 120ns when I performed tests that ran in the cpu cache. So in summary the performance impact is: 1ns improvement in the worst case with user namespace support compiled out. 8ns aka 5% slowdown in the worst case with user namespace support compiled in. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-11-17 16:11:58 +08:00
#endif
#endif /* _LINUX_USER_H */