OpenCloudOS-Kernel/include/linux/thread_info.h

267 lines
7.5 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/* thread_info.h: common low-level thread information accessors
*
* Copyright (C) 2002 David Howells (dhowells@redhat.com)
* - Incorporating suggestions made by Linus Torvalds
*/
#ifndef _LINUX_THREAD_INFO_H
#define _LINUX_THREAD_INFO_H
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
#include <linux/types.h>
kernel.h: split out panic and oops helpers kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out panic and oops helpers. There are several purposes of doing this: - dropping dependency in bug.h - dropping a loop by moving out panic_notifier.h - unload kernel.h from something which has its own domain At the same time convert users tree-wide to use new headers, although for the time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [akpm@linux-foundation.org: thread_info.h needs limits.h] [andriy.shevchenko@linux.intel.com: ia64 fix] Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 09:54:59 +08:00
#include <linux/limits.h>
#include <linux/bug.h>
#include <linux/restart_block.h>
#include <linux/errno.h>
#ifdef CONFIG_THREAD_INFO_IN_TASK
/*
* For CONFIG_THREAD_INFO_IN_TASK kernels we need <asm/current.h> for the
* definition of current, but for !CONFIG_THREAD_INFO_IN_TASK kernels,
* including <asm/current.h> can cause a circular dependency on some platforms.
*/
#include <asm/current.h>
#define current_thread_info() ((struct thread_info *)current)
#endif
#include <linux/bitops.h>
/*
* For per-arch arch_within_stack_frames() implementations, defined in
* asm/thread_info.h.
*/
enum {
BAD_STACK = -1,
NOT_STACK = 0,
GOOD_FRAME,
GOOD_STACK,
};
#ifdef CONFIG_GENERIC_ENTRY
enum syscall_work_bit {
SYSCALL_WORK_BIT_SECCOMP,
SYSCALL_WORK_BIT_SYSCALL_TRACEPOINT,
SYSCALL_WORK_BIT_SYSCALL_TRACE,
SYSCALL_WORK_BIT_SYSCALL_EMU,
SYSCALL_WORK_BIT_SYSCALL_AUDIT,
kernel: Implement selective syscall userspace redirection Introduce a mechanism to quickly disable/enable syscall handling for a specific process and redirect to userspace via SIGSYS. This is useful for processes with parts that require syscall redirection and parts that don't, but who need to perform this boundary crossing really fast, without paying the cost of a system call to reconfigure syscall handling on each boundary transition. This is particularly important for Windows games running over Wine. The proposed interface looks like this: prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <off>, <length>, [selector]) The range [<offset>,<offset>+<length>) is a part of the process memory map that is allowed to by-pass the redirection code and dispatch syscalls directly, such that in fast paths a process doesn't need to disable the trap nor the kernel has to check the selector. This is essential to return from SIGSYS to a blocked area without triggering another SIGSYS from rt_sigreturn. selector is an optional pointer to a char-sized userspace memory region that has a key switch for the mechanism. This key switch is set to either PR_SYS_DISPATCH_ON, PR_SYS_DISPATCH_OFF to enable and disable the redirection without calling the kernel. The feature is meant to be set per-thread and it is disabled on fork/clone/execv. Internally, this doesn't add overhead to the syscall hot path, and it requires very little per-architecture support. I avoided using seccomp, even though it duplicates some functionality, due to previous feedback that maybe it shouldn't mix with seccomp since it is not a security mechanism. And obviously, this should never be considered a security mechanism, since any part of the program can by-pass it by using the syscall dispatcher. For the sysinfo benchmark, which measures the overhead added to executing a native syscall that doesn't require interception, the overhead using only the direct dispatcher region to issue syscalls is pretty much irrelevant. The overhead of using the selector goes around 40ns for a native (unredirected) syscall in my system, and it is (as expected) dominated by the supervisor-mode user-address access. In fact, with SMAP off, the overhead is consistently less than 5ns on my test box. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201127193238.821364-4-krisman@collabora.com
2020-11-28 03:32:34 +08:00
SYSCALL_WORK_BIT_SYSCALL_USER_DISPATCH,
SYSCALL_WORK_BIT_SYSCALL_EXIT_TRAP,
};
#define SYSCALL_WORK_SECCOMP BIT(SYSCALL_WORK_BIT_SECCOMP)
#define SYSCALL_WORK_SYSCALL_TRACEPOINT BIT(SYSCALL_WORK_BIT_SYSCALL_TRACEPOINT)
#define SYSCALL_WORK_SYSCALL_TRACE BIT(SYSCALL_WORK_BIT_SYSCALL_TRACE)
#define SYSCALL_WORK_SYSCALL_EMU BIT(SYSCALL_WORK_BIT_SYSCALL_EMU)
#define SYSCALL_WORK_SYSCALL_AUDIT BIT(SYSCALL_WORK_BIT_SYSCALL_AUDIT)
kernel: Implement selective syscall userspace redirection Introduce a mechanism to quickly disable/enable syscall handling for a specific process and redirect to userspace via SIGSYS. This is useful for processes with parts that require syscall redirection and parts that don't, but who need to perform this boundary crossing really fast, without paying the cost of a system call to reconfigure syscall handling on each boundary transition. This is particularly important for Windows games running over Wine. The proposed interface looks like this: prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <off>, <length>, [selector]) The range [<offset>,<offset>+<length>) is a part of the process memory map that is allowed to by-pass the redirection code and dispatch syscalls directly, such that in fast paths a process doesn't need to disable the trap nor the kernel has to check the selector. This is essential to return from SIGSYS to a blocked area without triggering another SIGSYS from rt_sigreturn. selector is an optional pointer to a char-sized userspace memory region that has a key switch for the mechanism. This key switch is set to either PR_SYS_DISPATCH_ON, PR_SYS_DISPATCH_OFF to enable and disable the redirection without calling the kernel. The feature is meant to be set per-thread and it is disabled on fork/clone/execv. Internally, this doesn't add overhead to the syscall hot path, and it requires very little per-architecture support. I avoided using seccomp, even though it duplicates some functionality, due to previous feedback that maybe it shouldn't mix with seccomp since it is not a security mechanism. And obviously, this should never be considered a security mechanism, since any part of the program can by-pass it by using the syscall dispatcher. For the sysinfo benchmark, which measures the overhead added to executing a native syscall that doesn't require interception, the overhead using only the direct dispatcher region to issue syscalls is pretty much irrelevant. The overhead of using the selector goes around 40ns for a native (unredirected) syscall in my system, and it is (as expected) dominated by the supervisor-mode user-address access. In fact, with SMAP off, the overhead is consistently less than 5ns on my test box. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201127193238.821364-4-krisman@collabora.com
2020-11-28 03:32:34 +08:00
#define SYSCALL_WORK_SYSCALL_USER_DISPATCH BIT(SYSCALL_WORK_BIT_SYSCALL_USER_DISPATCH)
#define SYSCALL_WORK_SYSCALL_EXIT_TRAP BIT(SYSCALL_WORK_BIT_SYSCALL_EXIT_TRAP)
#endif
#include <asm/thread_info.h>
#ifdef __KERNEL__
#ifndef arch_set_restart_data
#define arch_set_restart_data(restart) do { } while (0)
#endif
static inline long set_restart_fn(struct restart_block *restart,
long (*fn)(struct restart_block *))
{
restart->fn = fn;
arch_set_restart_data(restart);
return -ERESTART_RESTARTBLOCK;
}
#ifndef THREAD_ALIGN
#define THREAD_ALIGN THREAD_SIZE
#endif
fork: unconditionally clear stack on fork One of the classes of kernel stack content leaks[1] is exposing the contents of prior heap or stack contents when a new process stack is allocated. Normally, those stacks are not zeroed, and the old contents remain in place. In the face of stack content exposure flaws, those contents can leak to userspace. Fixing this will make the kernel no longer vulnerable to these flaws, as the stack will be wiped each time a stack is assigned to a new process. There's not a meaningful change in runtime performance; it almost looks like it provides a benefit. Performing back-to-back kernel builds before: Run times: 157.86 157.09 158.90 160.94 160.80 Mean: 159.12 Std Dev: 1.54 and after: Run times: 159.31 157.34 156.71 158.15 160.81 Mean: 158.46 Std Dev: 1.46 Instead of making this a build or runtime config, Andy Lutomirski recommended this just be enabled by default. [1] A noisy search for many kinds of stack content leaks can be seen here: https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak I did some more with perf and cycle counts on running 100,000 execs of /bin/true. before: Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841 Mean: 221015379122.60 Std Dev: 4662486552.47 after: Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348 Mean: 217745009865.40 Std Dev: 5935559279.99 It continues to look like it's faster, though the deviation is rather wide, but I'm not sure what I could do that would be less noisy. I'm open to ideas! Link: http://lkml.kernel.org/r/20180221021659.GA37073@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-21 05:55:31 +08:00
#define THREADINFO_GFP (GFP_KERNEL_ACCOUNT | __GFP_ZERO)
/*
* flag set/clear/test wrappers
* - pass TIF_xxxx constants to these functions
*/
static inline void set_ti_thread_flag(struct thread_info *ti, int flag)
{
set_bit(flag, (unsigned long *)&ti->flags);
}
static inline void clear_ti_thread_flag(struct thread_info *ti, int flag)
{
clear_bit(flag, (unsigned long *)&ti->flags);
}
static inline void update_ti_thread_flag(struct thread_info *ti, int flag,
bool value)
{
if (value)
set_ti_thread_flag(ti, flag);
else
clear_ti_thread_flag(ti, flag);
}
static inline int test_and_set_ti_thread_flag(struct thread_info *ti, int flag)
{
return test_and_set_bit(flag, (unsigned long *)&ti->flags);
}
static inline int test_and_clear_ti_thread_flag(struct thread_info *ti, int flag)
{
return test_and_clear_bit(flag, (unsigned long *)&ti->flags);
}
static inline int test_ti_thread_flag(struct thread_info *ti, int flag)
{
return test_bit(flag, (unsigned long *)&ti->flags);
}
/*
* This may be used in noinstr code, and needs to be __always_inline to prevent
* inadvertent instrumentation.
*/
static __always_inline unsigned long read_ti_thread_flags(struct thread_info *ti)
{
return READ_ONCE(ti->flags);
}
#define set_thread_flag(flag) \
set_ti_thread_flag(current_thread_info(), flag)
#define clear_thread_flag(flag) \
clear_ti_thread_flag(current_thread_info(), flag)
#define update_thread_flag(flag, value) \
update_ti_thread_flag(current_thread_info(), flag, value)
#define test_and_set_thread_flag(flag) \
test_and_set_ti_thread_flag(current_thread_info(), flag)
#define test_and_clear_thread_flag(flag) \
test_and_clear_ti_thread_flag(current_thread_info(), flag)
#define test_thread_flag(flag) \
test_ti_thread_flag(current_thread_info(), flag)
#define read_thread_flags() \
read_ti_thread_flags(current_thread_info())
#define read_task_thread_flags(t) \
read_ti_thread_flags(task_thread_info(t))
#ifdef CONFIG_GENERIC_ENTRY
#define set_syscall_work(fl) \
set_bit(SYSCALL_WORK_BIT_##fl, &current_thread_info()->syscall_work)
#define test_syscall_work(fl) \
test_bit(SYSCALL_WORK_BIT_##fl, &current_thread_info()->syscall_work)
#define clear_syscall_work(fl) \
clear_bit(SYSCALL_WORK_BIT_##fl, &current_thread_info()->syscall_work)
#define set_task_syscall_work(t, fl) \
set_bit(SYSCALL_WORK_BIT_##fl, &task_thread_info(t)->syscall_work)
#define test_task_syscall_work(t, fl) \
test_bit(SYSCALL_WORK_BIT_##fl, &task_thread_info(t)->syscall_work)
#define clear_task_syscall_work(t, fl) \
clear_bit(SYSCALL_WORK_BIT_##fl, &task_thread_info(t)->syscall_work)
#else /* CONFIG_GENERIC_ENTRY */
#define set_syscall_work(fl) \
set_ti_thread_flag(current_thread_info(), TIF_##fl)
#define test_syscall_work(fl) \
test_ti_thread_flag(current_thread_info(), TIF_##fl)
#define clear_syscall_work(fl) \
clear_ti_thread_flag(current_thread_info(), TIF_##fl)
#define set_task_syscall_work(t, fl) \
set_ti_thread_flag(task_thread_info(t), TIF_##fl)
#define test_task_syscall_work(t, fl) \
test_ti_thread_flag(task_thread_info(t), TIF_##fl)
#define clear_task_syscall_work(t, fl) \
clear_ti_thread_flag(task_thread_info(t), TIF_##fl)
#endif /* !CONFIG_GENERIC_ENTRY */
cpuidle, sched: Remove instrumentation from TIF_{POLLING_NRFLAG,NEED_RESCHED} objtool pointed out that various idle-TIF management methods have instrumentation: vmlinux.o: warning: objtool: mwait_idle+0x5: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xc5: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0xbc: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0xea: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0xb4: call to current_set_polling_and_test() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0xa6: call to current_clr_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0xbf: call to current_clr_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0xa1: call to current_clr_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: mwait_idle+0xe: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xc5: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0xbc: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0xea: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0xb4: call to __current_set_polling() leaves .noinstr.text section vmlinux.o: warning: objtool: cpu_idle_poll.isra.0+0x73: call to test_ti_thread_flag() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_s2idle+0x73: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle_irq+0x91: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: intel_idle+0x78: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_safe_halt+0xf: call to test_ti_thread_flag.constprop.0() leaves .noinstr.text section Remove the instrumentation, because these methods are used in low-level cpuidle code moving between states, that should not be instrumented. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.988741683@infradead.org
2023-01-13 03:43:41 +08:00
#ifdef _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H
static __always_inline bool tif_need_resched(void)
{
return arch_test_bit(TIF_NEED_RESCHED,
(unsigned long *)(&current_thread_info()->flags));
}
#else
static __always_inline bool tif_need_resched(void)
{
return test_bit(TIF_NEED_RESCHED,
(unsigned long *)(&current_thread_info()->flags));
}
#endif /* _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H */
#ifndef CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES
static inline int arch_within_stack_frames(const void * const stack,
const void * const stackend,
const void *obj, unsigned long len)
{
return 0;
}
#endif
#ifdef CONFIG_HARDENED_USERCOPY
extern void __check_object_size(const void *ptr, unsigned long n,
bool to_user);
static __always_inline void check_object_size(const void *ptr, unsigned long n,
bool to_user)
{
if (!__builtin_constant_p(n))
__check_object_size(ptr, n, to_user);
}
#else
static inline void check_object_size(const void *ptr, unsigned long n,
bool to_user)
{ }
#endif /* CONFIG_HARDENED_USERCOPY */
extern void __compiletime_error("copy source size is too small")
__bad_copy_from(void);
extern void __compiletime_error("copy destination size is too small")
__bad_copy_to(void);
mm: uninline copy_overflow() While building a small config with CONFIG_CC_OPTIMISE_FOR_SIZE, I ended up with more than 50 times the following function in vmlinux because GCC doesn't honor the 'inline' keyword: c00243bc <copy_overflow>: c00243bc: 94 21 ff f0 stwu r1,-16(r1) c00243c0: 7c 85 23 78 mr r5,r4 c00243c4: 7c 64 1b 78 mr r4,r3 c00243c8: 3c 60 c0 62 lis r3,-16286 c00243cc: 7c 08 02 a6 mflr r0 c00243d0: 38 63 5e e5 addi r3,r3,24293 c00243d4: 90 01 00 14 stw r0,20(r1) c00243d8: 4b ff 82 45 bl c001c61c <__warn_printk> c00243dc: 0f e0 00 00 twui r0,0 c00243e0: 80 01 00 14 lwz r0,20(r1) c00243e4: 38 21 00 10 addi r1,r1,16 c00243e8: 7c 08 03 a6 mtlr r0 c00243ec: 4e 80 00 20 blr With -Winline, GCC tells: /include/linux/thread_info.h:212:20: warning: inlining failed in call to 'copy_overflow': call is unlikely and code size would grow [-Winline] copy_overflow() is a non conditional warning called by check_copy_size() on an error path. check_copy_size() have to remain inlined in order to benefit from constant folding, but copy_overflow() is not worth inlining. Uninline the warning when CONFIG_BUG is selected. When CONFIG_BUG is not selected, WARN() does nothing so skip it. This reduces the size of vmlinux by almost 4kbytes. Link: https://lkml.kernel.org/r/e1723b9cfa924bcefcd41f69d0025b38e4c9364e.1644819985.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:47:49 +08:00
void __copy_overflow(int size, unsigned long count);
static inline void copy_overflow(int size, unsigned long count)
{
mm: uninline copy_overflow() While building a small config with CONFIG_CC_OPTIMISE_FOR_SIZE, I ended up with more than 50 times the following function in vmlinux because GCC doesn't honor the 'inline' keyword: c00243bc <copy_overflow>: c00243bc: 94 21 ff f0 stwu r1,-16(r1) c00243c0: 7c 85 23 78 mr r5,r4 c00243c4: 7c 64 1b 78 mr r4,r3 c00243c8: 3c 60 c0 62 lis r3,-16286 c00243cc: 7c 08 02 a6 mflr r0 c00243d0: 38 63 5e e5 addi r3,r3,24293 c00243d4: 90 01 00 14 stw r0,20(r1) c00243d8: 4b ff 82 45 bl c001c61c <__warn_printk> c00243dc: 0f e0 00 00 twui r0,0 c00243e0: 80 01 00 14 lwz r0,20(r1) c00243e4: 38 21 00 10 addi r1,r1,16 c00243e8: 7c 08 03 a6 mtlr r0 c00243ec: 4e 80 00 20 blr With -Winline, GCC tells: /include/linux/thread_info.h:212:20: warning: inlining failed in call to 'copy_overflow': call is unlikely and code size would grow [-Winline] copy_overflow() is a non conditional warning called by check_copy_size() on an error path. check_copy_size() have to remain inlined in order to benefit from constant folding, but copy_overflow() is not worth inlining. Uninline the warning when CONFIG_BUG is selected. When CONFIG_BUG is not selected, WARN() does nothing so skip it. This reduces the size of vmlinux by almost 4kbytes. Link: https://lkml.kernel.org/r/e1723b9cfa924bcefcd41f69d0025b38e4c9364e.1644819985.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:47:49 +08:00
if (IS_ENABLED(CONFIG_BUG))
__copy_overflow(size, count);
}
static __always_inline __must_check bool
check_copy_size(const void *addr, size_t bytes, bool is_source)
{
int sz = __builtin_object_size(addr, 0);
if (unlikely(sz >= 0 && sz < bytes)) {
if (!__builtin_constant_p(bytes))
copy_overflow(sz, bytes);
else if (is_source)
__bad_copy_from();
else
__bad_copy_to();
return false;
}
if (WARN_ON_ONCE(bytes > INT_MAX))
return false;
check_object_size(addr, bytes, is_source);
return true;
}
x86/arch_prctl: Add ARCH_[GET|SET]_CPUID Intel supports faulting on the CPUID instruction beginning with Ivy Bridge. When enabled, the processor will fault on attempts to execute the CPUID instruction with CPL>0. Exposing this feature to userspace will allow a ptracer to trap and emulate the CPUID instruction. When supported, this feature is controlled by toggling bit 0 of MSR_MISC_FEATURES_ENABLES. It is documented in detail in Section 2.3.2 of https://bugzilla.kernel.org/attachment.cgi?id=243991 Implement a new pair of arch_prctls, available on both x86-32 and x86-64. ARCH_GET_CPUID: Returns the current CPUID state, either 0 if CPUID faulting is enabled (and thus the CPUID instruction is not available) or 1 if CPUID faulting is not enabled. ARCH_SET_CPUID: Set the CPUID state to the second argument. If cpuid_enabled is 0 CPUID faulting will be activated, otherwise it will be deactivated. Returns ENODEV if CPUID faulting is not supported on this system. The state of the CPUID faulting flag is propagated across forks, but reset upon exec. Signed-off-by: Kyle Huey <khuey@kylehuey.com> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: linux-kselftest@vger.kernel.org Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Robert O'Callahan <robert@ocallahan.org> Cc: Richard Weinberger <richard@nod.at> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jeff Dike <jdike@addtoit.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: user-mode-linux-user@lists.sourceforge.net Cc: David Matlack <dmatlack@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: linux-fsdevel@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/20170320081628.18952-9-khuey@kylehuey.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-20 16:16:26 +08:00
#ifndef arch_setup_new_exec
static inline void arch_setup_new_exec(void) { }
#endif
thread_info: move function declarations to linux/thread_info.h There are a few __weak functions in kernel/fork.c, which architectures can override. If there is no prototype, the compiler warns about them: kernel/fork.c:164:13: error: no previous prototype for 'arch_release_task_struct' [-Werror=missing-prototypes] kernel/fork.c:991:20: error: no previous prototype for 'arch_task_cache_init' [-Werror=missing-prototypes] kernel/fork.c:1086:12: error: no previous prototype for 'arch_dup_task_struct' [-Werror=missing-prototypes] There are already prototypes in a number of architecture specific headers that have addressed those warnings before, but it's much better to have these in a single place so the warning no longer shows up anywhere. Link: https://lkml.kernel.org/r/20230517131102.934196-14-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Paris <eparis@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-17 21:11:01 +08:00
void arch_task_cache_init(void); /* for CONFIG_SH */
void arch_release_task_struct(struct task_struct *tsk);
int arch_dup_task_struct(struct task_struct *dst,
struct task_struct *src);
#endif /* __KERNEL__ */
#endif /* _LINUX_THREAD_INFO_H */