OpenCloudOS-Kernel/include/linux/pgtable.h

1615 lines
42 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:32:38 +08:00
#ifndef _LINUX_PGTABLE_H
#define _LINUX_PGTABLE_H
#include <linux/pfn.h>
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:32:38 +08:00
#include <asm/pgtable.h>
#ifndef __ASSEMBLY__
#ifdef CONFIG_MMU
#include <linux/mm_types.h>
#include <linux/bug.h>
#include <linux/errno.h>
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 11:05:33 +08:00
#include <asm-generic/pgtable_uffd.h>
#include <linux/page_table_check.h>
#if 5 - defined(__PAGETABLE_P4D_FOLDED) - defined(__PAGETABLE_PUD_FOLDED) - \
defined(__PAGETABLE_PMD_FOLDED) != CONFIG_PGTABLE_LEVELS
#error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
mm: define default PGTABLE_LEVELS to two By this time all architectures which support more than two page table levels should be covered. This patch add default definiton of PGTABLE_LEVELS equal 2. We also add assert to detect inconsistence between CONFIG_PGTABLE_LEVELS and __PAGETABLE_PMD_FOLDED/__PAGETABLE_PUD_FOLDED. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 06:46:17 +08:00
#endif
/*
* On almost all architectures and configurations, 0 can be used as the
* upper ceiling to free_pgtables(): on many architectures it has the same
* effect as using TASK_SIZE. However, there is one configuration which
* must impose a more careful limit, to avoid freeing kernel pgtables.
*/
#ifndef USER_PGTABLES_CEILING
#define USER_PGTABLES_CEILING 0UL
#endif
mm: define default value for FIRST_USER_ADDRESS Currently most platforms define FIRST_USER_ADDRESS as 0UL duplication the same code all over. Instead just define a generic default value (i.e 0UL) for FIRST_USER_ADDRESS and let the platforms override when required. This makes it much cleaner with reduced code. The default FIRST_USER_ADDRESS here would be skipped in <linux/pgtable.h> when the given platform overrides its value via <asm/pgtable.h>. Link: https://lkml.kernel.org/r/1620615725-24623-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [RISC-V] Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 09:53:13 +08:00
/*
* This defines the first usable user address. Platforms
* can override its value with custom FIRST_USER_ADDRESS
* defined in their respective <asm/pgtable.h>.
*/
#ifndef FIRST_USER_ADDRESS
#define FIRST_USER_ADDRESS 0UL
#endif
mm/thp: define default pmd_pgtable() Currently most platforms define pmd_pgtable() as pmd_page() duplicating the same code all over. Instead just define a default value i.e pmd_page() for pmd_pgtable() and let platforms override when required via <asm/pgtable.h>. All the existing platform that override pmd_pgtable() have been moved into their respective <asm/pgtable.h> header in order to precede before the new generic definition. This makes it much cleaner with reduced code. Link: https://lkml.kernel.org/r/1623646133-20306-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 09:53:59 +08:00
/*
* This defines the generic helper for accessing PMD page
* table page. Although platforms can still override this
* via their respective <asm/pgtable.h>.
*/
#ifndef pmd_pgtable
#define pmd_pgtable(pmd) pmd_page(pmd)
#endif
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
/*
* A page table page can be thought of an array like this: pXd_t[PTRS_PER_PxD]
*
* The pXx_index() functions return the index of the entry in the page
* table page which would control the given virtual address
*
* As these functions may be used by the same code for different levels of
* the page table folding, they are always available, regardless of
* CONFIG_PGTABLE_LEVELS value. For the folded levels they simply return 0
* because in such cases PTRS_PER_PxD equals 1.
*/
static inline unsigned long pte_index(unsigned long address)
{
return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
}
#define pte_index pte_index
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
#ifndef pmd_index
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
#define pmd_index pmd_index
#endif
#ifndef pud_index
static inline unsigned long pud_index(unsigned long address)
{
return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
}
#define pud_index pud_index
#endif
#ifndef pgd_index
/* Must be a compile-time constant, so implement it as a macro */
#define pgd_index(a) (((a) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
#endif
#ifndef pte_offset_kernel
static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
{
return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
}
#define pte_offset_kernel pte_offset_kernel
#endif
mm/pgtable: allow pte_offset_map[_lock]() to fail Make pte_offset_map() a wrapper for __pte_offset_map() (optionally outputs pmdval), pte_offset_map_lock() a sparse __cond_lock wrapper for __pte_offset_map_lock(): those __funcs added in mm/pgtable-generic.c. __pte_offset_map() do pmdval validation (including pmd_clear_bad() when pmd_bad()), returning NULL if pmdval is not for a page table. __pte_offset_map_lock() verify pmdval unchanged after getting the lock, trying again if it changed. No #ifdef CONFIG_TRANSPARENT_HUGEPAGE around them: that could be done to cover the imminent case, but we expect to generalize it later, and it makes a mess of where to do the pmd_bad() clearing. Add pte_offset_map_nolock(): outputs ptl like pte_offset_map_lock(), without actually taking the lock. This will be preferred to open uses of pte_lockptr(), because (when split ptlock is in page table's struct page) it points to the right lock for the returned pte pointer, even if *pmd gets changed racily afterwards. Update corresponding Documentation. Do not add the anticipated rcu_read_lock() and rcu_read_unlock()s yet: they have to wait until all architectures are balancing pte_offset_map()s with pte_unmap()s (as in the arch series posted earlier). But comment where they will go, so that it's easy to add them for experiments. And only when those are in place can transient racy failure cases be enabled. Add more safety for the PAE mismatched pmd_low pmd_high case at that time. Link: https://lkml.kernel.org/r/2929bfd-9893-a374-e463-4c3127ff9b9d@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 09:10:32 +08:00
#ifdef CONFIG_HIGHPTE
#define __pte_map(pmd, address) \
((pte_t *)kmap_local_page(pmd_page(*(pmd))) + pte_index((address)))
#define pte_unmap(pte) do { \
kunmap_local((pte)); \
/* rcu_read_unlock() to be added later */ \
} while (0)
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
#else
mm/pgtable: allow pte_offset_map[_lock]() to fail Make pte_offset_map() a wrapper for __pte_offset_map() (optionally outputs pmdval), pte_offset_map_lock() a sparse __cond_lock wrapper for __pte_offset_map_lock(): those __funcs added in mm/pgtable-generic.c. __pte_offset_map() do pmdval validation (including pmd_clear_bad() when pmd_bad()), returning NULL if pmdval is not for a page table. __pte_offset_map_lock() verify pmdval unchanged after getting the lock, trying again if it changed. No #ifdef CONFIG_TRANSPARENT_HUGEPAGE around them: that could be done to cover the imminent case, but we expect to generalize it later, and it makes a mess of where to do the pmd_bad() clearing. Add pte_offset_map_nolock(): outputs ptl like pte_offset_map_lock(), without actually taking the lock. This will be preferred to open uses of pte_lockptr(), because (when split ptlock is in page table's struct page) it points to the right lock for the returned pte pointer, even if *pmd gets changed racily afterwards. Update corresponding Documentation. Do not add the anticipated rcu_read_lock() and rcu_read_unlock()s yet: they have to wait until all architectures are balancing pte_offset_map()s with pte_unmap()s (as in the arch series posted earlier). But comment where they will go, so that it's easy to add them for experiments. And only when those are in place can transient racy failure cases be enabled. Add more safety for the PAE mismatched pmd_low pmd_high case at that time. Link: https://lkml.kernel.org/r/2929bfd-9893-a374-e463-4c3127ff9b9d@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 09:10:32 +08:00
static inline pte_t *__pte_map(pmd_t *pmd, unsigned long address)
{
return pte_offset_kernel(pmd, address);
}
static inline void pte_unmap(pte_t *pte)
{
/* rcu_read_unlock() to be added later */
}
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
#endif
/* Find an entry in the second-level page table.. */
#ifndef pmd_offset
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return pud_pgtable(*pud) + pmd_index(address);
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
}
#define pmd_offset pmd_offset
#endif
#ifndef pud_offset
static inline pud_t *pud_offset(p4d_t *p4d, unsigned long address)
{
return p4d_pgtable(*p4d) + pud_index(address);
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
}
#define pud_offset pud_offset
#endif
static inline pgd_t *pgd_offset_pgd(pgd_t *pgd, unsigned long address)
{
return (pgd + pgd_index(address));
};
/*
* a shortcut to get a pgd_t in a given mm
*/
#ifndef pgd_offset
#define pgd_offset(mm, address) pgd_offset_pgd((mm)->pgd, (address))
#endif
/*
* a shortcut which implies the use of the kernel's pgd, instead
* of a process's
*/
#ifndef pgd_offset_k
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
#endif
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:10 +08:00
mm: pgtable: add shortcuts for accessing kernel PMD and PTE The powerpc 32-bit implementation of pgtable has nice shortcuts for accessing kernel PMD and PTE for a given virtual address. Make these helpers available for all architectures. [rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()] Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org [akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:05 +08:00
/*
* In many cases it is known that a virtual address is mapped at PMD or PTE
* level, so instead of traversing all the page table levels, we can get a
* pointer to the PMD entry in user or kernel page table or translate a virtual
* address to the pointer in the PTE in the kernel page tables with simple
* helpers.
*/
static inline pmd_t *pmd_off(struct mm_struct *mm, unsigned long va)
{
return pmd_offset(pud_offset(p4d_offset(pgd_offset(mm, va), va), va), va);
}
static inline pmd_t *pmd_off_k(unsigned long va)
{
return pmd_offset(pud_offset(p4d_offset(pgd_offset_k(va), va), va), va);
}
static inline pte_t *virt_to_kpte(unsigned long vaddr)
{
pmd_t *pmd = pmd_off_k(vaddr);
return pmd_none(*pmd) ? NULL : pte_offset_kernel(pmd, vaddr);
}
#ifndef pmd_young
static inline int pmd_young(pmd_t pmd)
{
return 0;
}
#endif
#ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
extern int ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep,
pte_t entry, int dirty);
#endif
#ifndef __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
pmd_t entry, int dirty);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
extern int pudp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pud_t *pudp,
pud_t entry, int dirty);
#else
static inline int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
pmd_t entry, int dirty)
{
BUILD_BUG();
return 0;
}
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
static inline int pudp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pud_t *pudp,
pud_t entry, int dirty)
{
BUILD_BUG();
return 0;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
mm: move ptep_get() and pmdp_get() helpers There are many call sites that directly dereference a pte_t pointer. This makes it very difficult to properly encapsulate a page table in the arch code without having to allocate shadow page tables. We will shortly solve this by replacing all the call sites with ptep_get() calls. But there are call sites above the function definition in the header file, so let's move ptep_get() to an earlier location to solve that problem. And move pmdp_get() at the same time to keep it close to ptep_get(). Link: https://lkml.kernel.org/r/20230612151545.3317766-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: kernel test robot <lkp@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:44 +08:00
#ifndef ptep_get
static inline pte_t ptep_get(pte_t *ptep)
{
return READ_ONCE(*ptep);
}
#endif
#ifndef pmdp_get
static inline pmd_t pmdp_get(pmd_t *pmdp)
{
return READ_ONCE(*pmdp);
}
#endif
#ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
unsigned long address,
pte_t *ptep)
{
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:45 +08:00
pte_t pte = ptep_get(ptep);
int r = 1;
if (!pte_young(pte))
r = 0;
else
set_pte_at(vma->vm_mm, address, ptep, pte_mkold(pte));
return r;
}
#endif
#ifndef __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG Some architectures support the accessed bit in non-leaf PMD entries, e.g., x86 sets the accessed bit in a non-leaf PMD entry when using it as part of linear address translation [1]. Page table walkers that clear the accessed bit may use this capability to reduce their search space. Note that: 1. Although an inline function is preferable, this capability is added as a configuration option for consistency with the existing macros. 2. Due to the little interest in other varieties, this capability was only tested on Intel and AMD CPUs. Thanks to the following developers for their efforts [2][3]. Randy Dunlap <rdunlap@infradead.org> Stephen Rothwell <sfr@canb.auug.org.au> [1]: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3 (June 2021), section 4.8 [2] https://lore.kernel.org/r/bfdcc7c8-922f-61a9-aa15-7e7250f04af7@infradead.org/ [3] https://lore.kernel.org/r/20220413151513.5a0d7a7e@canb.auug.org.au/ Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 15:59:59 +08:00
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG)
static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp)
{
pmd_t pmd = *pmdp;
int r = 1;
if (!pmd_young(pmd))
r = 0;
else
set_pmd_at(vma->vm_mm, address, pmdp, pmd_mkold(pmd));
return r;
}
#else
static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp)
{
BUILD_BUG();
return 0;
}
mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG Some architectures support the accessed bit in non-leaf PMD entries, e.g., x86 sets the accessed bit in a non-leaf PMD entry when using it as part of linear address translation [1]. Page table walkers that clear the accessed bit may use this capability to reduce their search space. Note that: 1. Although an inline function is preferable, this capability is added as a configuration option for consistency with the existing macros. 2. Due to the little interest in other varieties, this capability was only tested on Intel and AMD CPUs. Thanks to the following developers for their efforts [2][3]. Randy Dunlap <rdunlap@infradead.org> Stephen Rothwell <sfr@canb.auug.org.au> [1]: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3 (June 2021), section 4.8 [2] https://lore.kernel.org/r/bfdcc7c8-922f-61a9-aa15-7e7250f04af7@infradead.org/ [3] https://lore.kernel.org/r/20220413151513.5a0d7a7e@canb.auug.org.au/ Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 15:59:59 +08:00
#endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG */
#endif
#ifndef __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
int ptep_clear_flush_young(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep);
#endif
#ifndef __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp);
#else
/*
* Despite relevant to THP only, this API is called from generic rmap code
* under PageTransHuge(), hence needs a dummy implementation for !THP
*/
static inline int pmdp_clear_flush_young(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp)
{
BUILD_BUG();
return 0;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef arch_has_hw_nonleaf_pmd_young
/*
* Return whether the accessed bit in non-leaf PMD entries is supported on the
* local CPU.
*/
static inline bool arch_has_hw_nonleaf_pmd_young(void)
{
return IS_ENABLED(CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG);
}
#endif
mm: x86, arm64: add arch_has_hw_pte_young() Patch series "Multi-Gen LRU Framework", v14. What's new ========== 1. OpenWrt, in addition to Android, Arch Linux Zen, Armbian, ChromeOS, Liquorix, post-factum and XanMod, is now shipping MGLRU on 5.15. 2. Fixed long-tailed direct reclaim latency seen on high-memory (TBs) machines. The old direct reclaim backoff, which tries to enforce a minimum fairness among all eligible memcgs, over-swapped by about (total_mem>>DEF_PRIORITY)-nr_to_reclaim. The new backoff, which pulls the plug on swapping once the target is met, trades some fairness for curtailed latency: https://lore.kernel.org/r/20220918080010.2920238-10-yuzhao@google.com/ 3. Fixed minior build warnings and conflicts. More comments and nits. TLDR ==== The current page reclaim is too expensive in terms of CPU usage and it often makes poor choices about what to evict. This patchset offers an alternative solution that is performant, versatile and straightforward. Patchset overview ================= The design and implementation overview is in patch 14: https://lore.kernel.org/r/20220918080010.2920238-15-yuzhao@google.com/ 01. mm: x86, arm64: add arch_has_hw_pte_young() 02. mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG Take advantage of hardware features when trying to clear the accessed bit in many PTEs. 03. mm/vmscan.c: refactor shrink_node() 04. Revert "include/linux/mm_inline.h: fold __update_lru_size() into its sole caller" Minor refactors to improve readability for the following patches. 05. mm: multi-gen LRU: groundwork Adds the basic data structure and the functions that insert pages to and remove pages from the multi-gen LRU (MGLRU) lists. 06. mm: multi-gen LRU: minimal implementation A minimal implementation without optimizations. 07. mm: multi-gen LRU: exploit locality in rmap Exploits spatial locality to improve efficiency when using the rmap. 08. mm: multi-gen LRU: support page table walks Further exploits spatial locality by optionally scanning page tables. 09. mm: multi-gen LRU: optimize multiple memcgs Optimizes the overall performance for multiple memcgs running mixed types of workloads. 10. mm: multi-gen LRU: kill switch Adds a kill switch to enable or disable MGLRU at runtime. 11. mm: multi-gen LRU: thrashing prevention 12. mm: multi-gen LRU: debugfs interface Provide userspace with features like thrashing prevention, working set estimation and proactive reclaim. 13. mm: multi-gen LRU: admin guide 14. mm: multi-gen LRU: design doc Add an admin guide and a design doc. Benchmark results ================= Independent lab results ----------------------- Based on the popularity of searches [01] and the memory usage in Google's public cloud, the most popular open-source memory-hungry applications, in alphabetical order, are: Apache Cassandra Memcached Apache Hadoop MongoDB Apache Spark PostgreSQL MariaDB (MySQL) Redis An independent lab evaluated MGLRU with the most widely used benchmark suites for the above applications. They posted 960 data points along with kernel metrics and perf profiles collected over more than 500 hours of total benchmark time. Their final reports show that, with 95% confidence intervals (CIs), the above applications all performed significantly better for at least part of their benchmark matrices. On 5.14: 1. Apache Spark [02] took 95% CIs [9.28, 11.19]% and [12.20, 14.93]% less wall time to sort three billion random integers, respectively, under the medium- and the high-concurrency conditions, when overcommitting memory. There were no statistically significant changes in wall time for the rest of the benchmark matrix. 2. MariaDB [03] achieved 95% CIs [5.24, 10.71]% and [20.22, 25.97]% more transactions per minute (TPM), respectively, under the medium- and the high-concurrency conditions, when overcommitting memory. There were no statistically significant changes in TPM for the rest of the benchmark matrix. 3. Memcached [04] achieved 95% CIs [23.54, 32.25]%, [20.76, 41.61]% and [21.59, 30.02]% more operations per second (OPS), respectively, for sequential access, random access and Gaussian (distribution) access, when THP=always; 95% CIs [13.85, 15.97]% and [23.94, 29.92]% more OPS, respectively, for random access and Gaussian access, when THP=never. There were no statistically significant changes in OPS for the rest of the benchmark matrix. 4. MongoDB [05] achieved 95% CIs [2.23, 3.44]%, [6.97, 9.73]% and [2.16, 3.55]% more operations per second (OPS), respectively, for exponential (distribution) access, random access and Zipfian (distribution) access, when underutilizing memory; 95% CIs [8.83, 10.03]%, [21.12, 23.14]% and [5.53, 6.46]% more OPS, respectively, for exponential access, random access and Zipfian access, when overcommitting memory. On 5.15: 5. Apache Cassandra [06] achieved 95% CIs [1.06, 4.10]%, [1.94, 5.43]% and [4.11, 7.50]% more operations per second (OPS), respectively, for exponential (distribution) access, random access and Zipfian (distribution) access, when swap was off; 95% CIs [0.50, 2.60]%, [6.51, 8.77]% and [3.29, 6.75]% more OPS, respectively, for exponential access, random access and Zipfian access, when swap was on. 6. Apache Hadoop [07] took 95% CIs [5.31, 9.69]% and [2.02, 7.86]% less average wall time to finish twelve parallel TeraSort jobs, respectively, under the medium- and the high-concurrency conditions, when swap was on. There were no statistically significant changes in average wall time for the rest of the benchmark matrix. 7. PostgreSQL [08] achieved 95% CI [1.75, 6.42]% more transactions per minute (TPM) under the high-concurrency condition, when swap was off; 95% CIs [12.82, 18.69]% and [22.70, 46.86]% more TPM, respectively, under the medium- and the high-concurrency conditions, when swap was on. There were no statistically significant changes in TPM for the rest of the benchmark matrix. 8. Redis [09] achieved 95% CIs [0.58, 5.94]%, [6.55, 14.58]% and [11.47, 19.36]% more total operations per second (OPS), respectively, for sequential access, random access and Gaussian (distribution) access, when THP=always; 95% CIs [1.27, 3.54]%, [10.11, 14.81]% and [8.75, 13.64]% more total OPS, respectively, for sequential access, random access and Gaussian access, when THP=never. Our lab results --------------- To supplement the above results, we ran the following benchmark suites on 5.16-rc7 and found no regressions [10]. fs_fio_bench_hdd_mq pft fs_lmbench pgsql-hammerdb fs_parallelio redis fs_postmark stream hackbench sysbenchthread kernbench tpcc_spark memcached unixbench multichase vm-scalability mutilate will-it-scale nginx [01] https://trends.google.com [02] https://lore.kernel.org/r/20211102002002.92051-1-bot@edi.works/ [03] https://lore.kernel.org/r/20211009054315.47073-1-bot@edi.works/ [04] https://lore.kernel.org/r/20211021194103.65648-1-bot@edi.works/ [05] https://lore.kernel.org/r/20211109021346.50266-1-bot@edi.works/ [06] https://lore.kernel.org/r/20211202062806.80365-1-bot@edi.works/ [07] https://lore.kernel.org/r/20211209072416.33606-1-bot@edi.works/ [08] https://lore.kernel.org/r/20211218071041.24077-1-bot@edi.works/ [09] https://lore.kernel.org/r/20211122053248.57311-1-bot@edi.works/ [10] https://lore.kernel.org/r/20220104202247.2903702-1-yuzhao@google.com/ Read-world applications ======================= Third-party testimonials ------------------------ Konstantin reported [11]: I have Archlinux with 8G RAM + zswap + swap. While developing, I have lots of apps opened such as multiple LSP-servers for different langs, chats, two browsers, etc... Usually, my system gets quickly to a point of SWAP-storms, where I have to kill LSP-servers, restart browsers to free memory, etc, otherwise the system lags heavily and is barely usable. 1.5 day ago I migrated from 5.11.15 kernel to 5.12 + the LRU patchset, and I started up by opening lots of apps to create memory pressure, and worked for a day like this. Till now I had not a single SWAP-storm, and mind you I got 3.4G in SWAP. I was never getting to the point of 3G in SWAP before without a single SWAP-storm. Vaibhav from IBM reported [12]: In a synthetic MongoDB Benchmark, seeing an average of ~19% throughput improvement on POWER10(Radix MMU + 64K Page Size) with MGLRU patches on top of 5.16 kernel for MongoDB + YCSB across three different request distributions, namely, Exponential, Uniform and Zipfan. Shuang from U of Rochester reported [13]: With the MGLRU, fio achieved 95% CIs [38.95, 40.26]%, [4.12, 6.64]% and [9.26, 10.36]% higher throughput, respectively, for random access, Zipfian (distribution) access and Gaussian (distribution) access, when the average number of jobs per CPU is 1; 95% CIs [42.32, 49.15]%, [9.44, 9.89]% and [20.99, 22.86]% higher throughput, respectively, for random access, Zipfian access and Gaussian access, when the average number of jobs per CPU is 2. Daniel from Michigan Tech reported [14]: With Memcached allocating ~100GB of byte-addressable Optante, performance improvement in terms of throughput (measured as queries per second) was about 10% for a series of workloads. Large-scale deployments ----------------------- We've rolled out MGLRU to tens of millions of ChromeOS users and about a million Android users. Google's fleetwide profiling [15] shows an overall 40% decrease in kswapd CPU usage, in addition to improvements in other UX metrics, e.g., an 85% decrease in the number of low-memory kills at the 75th percentile and an 18% decrease in app launch time at the 50th percentile. The downstream kernels that have been using MGLRU include: 1. Android [16] 2. Arch Linux Zen [17] 3. Armbian [18] 4. ChromeOS [19] 5. Liquorix [20] 6. OpenWrt [21] 7. post-factum [22] 8. XanMod [23] [11] https://lore.kernel.org/r/140226722f2032c86301fbd326d91baefe3d7d23.camel@yandex.ru/ [12] https://lore.kernel.org/r/87czj3mux0.fsf@vajain21.in.ibm.com/ [13] https://lore.kernel.org/r/20220105024423.26409-1-szhai2@cs.rochester.edu/ [14] https://lore.kernel.org/r/CA+4-3vksGvKd18FgRinxhqHetBS1hQekJE2gwco8Ja-bJWKtFw@mail.gmail.com/ [15] https://dl.acm.org/doi/10.1145/2749469.2750392 [16] https://android.com [17] https://archlinux.org [18] https://armbian.com [19] https://chromium.org [20] https://liquorix.net [21] https://openwrt.org [22] https://codeberg.org/pf-kernel [23] https://xanmod.org Summary ======= The facts are: 1. The independent lab results and the real-world applications indicate substantial improvements; there are no known regressions. 2. Thrashing prevention, working set estimation and proactive reclaim work out of the box; there are no equivalent solutions. 3. There is a lot of new code; no smaller changes have been demonstrated similar effects. Our options, accordingly, are: 1. Given the amount of evidence, the reported improvements will likely materialize for a wide range of workloads. 2. Gauging the interest from the past discussions, the new features will likely be put to use for both personal computers and data centers. 3. Based on Google's track record, the new code will likely be well maintained in the long term. It'd be more difficult if not impossible to achieve similar effects with other approaches. This patch (of 14): Some architectures automatically set the accessed bit in PTEs, e.g., x86 and arm64 v8.2. On architectures that do not have this capability, clearing the accessed bit in a PTE usually triggers a page fault following the TLB miss of this PTE (to emulate the accessed bit). Being aware of this capability can help make better decisions, e.g., whether to spread the work out over a period of time to reduce bursty page faults when trying to clear the accessed bit in many PTEs. Note that theoretically this capability can be unreliable, e.g., hotplugged CPUs might be different from builtin ones. Therefore it should not be used in architecture-independent code that involves correctness, e.g., to determine whether TLB flushes are required (in combination with the accessed bit). Link: https://lkml.kernel.org/r/20220918080010.2920238-1-yuzhao@google.com Link: https://lkml.kernel.org/r/20220918080010.2920238-2-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Acked-by: Will Deacon <will@kernel.org> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 15:59:58 +08:00
#ifndef arch_has_hw_pte_young
/*
* Return whether the accessed bit is supported on the local CPU.
*
* This stub assumes accessing through an old PTE triggers a page fault.
* Architectures that automatically set the access bit should overwrite it.
*/
static inline bool arch_has_hw_pte_young(void)
{
return false;
}
#endif
#ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR
static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
unsigned long address,
pte_t *ptep)
{
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:45 +08:00
pte_t pte = ptep_get(ptep);
pte_clear(mm, address, ptep);
page_table_check_pte_clear(mm, address, pte);
return pte;
}
#endif
static inline void ptep_clear(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
ptep_get_and_clear(mm, addr, ptep);
}
#ifdef CONFIG_GUP_GET_PXX_LOW_HIGH
/*
* For walking the pagetables without holding any locks. Some architectures
* (eg x86-32 PAE) cannot load the entries atomically without using expensive
* instructions. We are guaranteed that a PTE will only either go from not
* present to present, or present to not present -- it will not switch to a
* completely different present page without a TLB flush inbetween; which we
* are blocking by holding interrupts off.
*
* Setting ptes from not present to present goes:
*
* ptep->pte_high = h;
* smp_wmb();
* ptep->pte_low = l;
*
* And present to not present goes:
*
* ptep->pte_low = 0;
* smp_wmb();
* ptep->pte_high = 0;
*
* We must ensure here that the load of pte_low sees 'l' IFF pte_high sees 'h'.
* We load pte_high *after* loading pte_low, which ensures we don't see an older
* value of pte_high. *Then* we recheck pte_low, which ensures that we haven't
* picked up a changed pte high. We might have gotten rubbish values from
* pte_low and pte_high, but we are guaranteed that pte_low will not have the
* present bit set *unless* it is 'l'. Because get_user_pages_fast() only
* operates on present ptes we're safe.
*/
static inline pte_t ptep_get_lockless(pte_t *ptep)
{
pte_t pte;
do {
pte.pte_low = ptep->pte_low;
smp_rmb();
pte.pte_high = ptep->pte_high;
smp_rmb();
} while (unlikely(pte.pte_low != ptep->pte_low));
return pte;
}
#define ptep_get_lockless ptep_get_lockless
#if CONFIG_PGTABLE_LEVELS > 2
static inline pmd_t pmdp_get_lockless(pmd_t *pmdp)
{
pmd_t pmd;
do {
pmd.pmd_low = pmdp->pmd_low;
smp_rmb();
pmd.pmd_high = pmdp->pmd_high;
smp_rmb();
} while (unlikely(pmd.pmd_low != pmdp->pmd_low));
return pmd;
}
#define pmdp_get_lockless pmdp_get_lockless
#endif /* CONFIG_PGTABLE_LEVELS > 2 */
#endif /* CONFIG_GUP_GET_PXX_LOW_HIGH */
/*
* We require that the PTE can be read atomically.
*/
#ifndef ptep_get_lockless
static inline pte_t ptep_get_lockless(pte_t *ptep)
{
return ptep_get(ptep);
}
#endif
#ifndef pmdp_get_lockless
static inline pmd_t pmdp_get_lockless(pmd_t *pmdp)
{
return pmdp_get(pmdp);
}
#endif
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#ifndef __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
unsigned long address,
pmd_t *pmdp)
{
pmd_t pmd = *pmdp;
pmd_clear(pmdp);
page_table_check_pmd_clear(mm, address, pmd);
return pmd;
}
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#endif /* __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR */
#ifndef __HAVE_ARCH_PUDP_HUGE_GET_AND_CLEAR
static inline pud_t pudp_huge_get_and_clear(struct mm_struct *mm,
unsigned long address,
pud_t *pudp)
{
pud_t pud = *pudp;
pud_clear(pudp);
page_table_check_pud_clear(mm, address, pud);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
return pud;
}
#endif /* __HAVE_ARCH_PUDP_HUGE_GET_AND_CLEAR */
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#ifndef __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR_FULL
static inline pmd_t pmdp_huge_get_and_clear_full(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
int full)
{
return pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
}
#endif
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#ifndef __HAVE_ARCH_PUDP_HUGE_GET_AND_CLEAR_FULL
static inline pud_t pudp_huge_get_and_clear_full(struct mm_struct *mm,
unsigned long address, pud_t *pudp,
int full)
{
return pudp_huge_get_and_clear(mm, address, pudp);
}
#endif
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
2005-09-04 06:55:04 +08:00
#ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
unsigned long address, pte_t *ptep,
int full)
{
return ptep_get_and_clear(mm, address, ptep);
}
2005-09-04 06:55:04 +08:00
#endif
/*
* If two threads concurrently fault at the same page, the thread that
* won the race updates the PTE and its local TLB/Cache. The other thread
* gives up, simply does nothing, and continues; on architectures where
* software can update TLB, local TLB can be updated here to avoid next page
* fault. This function updates TLB only, do nothing with cache or others.
* It is the difference with function update_mmu_cache.
*/
#ifndef __HAVE_ARCH_UPDATE_MMU_TLB
static inline void update_mmu_tlb(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep)
{
}
#define __HAVE_ARCH_UPDATE_MMU_TLB
#endif
/*
* Some architectures may be able to avoid expensive synchronization
* primitives when modifications are made to PTE's which are already
* not present, or in the process of an address space destruction.
*/
#ifndef __HAVE_ARCH_PTE_CLEAR_NOT_PRESENT_FULL
static inline void pte_clear_not_present_full(struct mm_struct *mm,
unsigned long address,
pte_t *ptep,
int full)
{
pte_clear(mm, address, ptep);
}
2005-09-04 06:55:04 +08:00
#endif
#ifndef __HAVE_ARCH_PTEP_CLEAR_FLUSH
extern pte_t ptep_clear_flush(struct vm_area_struct *vma,
unsigned long address,
pte_t *ptep);
#endif
#ifndef __HAVE_ARCH_PMDP_HUGE_CLEAR_FLUSH
extern pmd_t pmdp_huge_clear_flush(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
extern pud_t pudp_huge_clear_flush(struct vm_area_struct *vma,
unsigned long address,
pud_t *pudp);
#endif
#ifndef __HAVE_ARCH_PTEP_SET_WRPROTECT
struct mm_struct;
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
{
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:45 +08:00
pte_t old_pte = ptep_get(ptep);
set_pte_at(mm, address, ptep, pte_wrprotect(old_pte));
}
#endif
/*
* On some architectures hardware does not set page access bit when accessing
* memory page, it is responsibility of software setting this bit. It brings
* out extra page fault penalty to track page access bit. For optimization page
* access bit can be set during all page fault flow on these arches.
* To be differentiate with macro pte_mkyoung, this macro is used on platforms
* where software maintains page access bit.
*/
#ifndef pte_sw_mkyoung
static inline pte_t pte_sw_mkyoung(pte_t pte)
{
return pte;
}
#define pte_sw_mkyoung pte_sw_mkyoung
#endif
#ifndef __HAVE_ARCH_PMDP_SET_WRPROTECT
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
static inline void pmdp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
pmd_t old_pmd = *pmdp;
set_pmd_at(mm, address, pmdp, pmd_wrprotect(old_pmd));
}
#else
static inline void pmdp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
BUILD_BUG();
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#ifndef __HAVE_ARCH_PUDP_SET_WRPROTECT
#ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
static inline void pudp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pud_t *pudp)
{
pud_t old_pud = *pudp;
set_pud_at(mm, address, pudp, pud_wrprotect(old_pud));
}
#else
static inline void pudp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pud_t *pudp)
{
BUILD_BUG();
}
#endif /* CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD */
#endif
#ifndef pmdp_collapse_flush
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp);
#else
static inline pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp)
{
BUILD_BUG();
return *pmdp;
}
#define pmdp_collapse_flush pmdp_collapse_flush
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#ifndef __HAVE_ARCH_PGTABLE_DEPOSIT
extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
pgtable_t pgtable);
#endif
#ifndef __HAVE_ARCH_PGTABLE_WITHDRAW
extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
#endif
mm/pgtable: delete pmd_trans_unstable() and friends Delete pmd_trans_unstable, pmd_none_or_trans_huge_or_clear_bad() and pmd_devmap_trans_unstable(), all now unused. With mixed feelings, delete all the comments on pmd_trans_unstable(). That was very good documentation of a subtle state, and this series does not even eliminate that state: but rather, normalizes and extends it, asking pte_offset_map[_lock]() callers to anticipate failure, without regard for whether mmap_read_lock() or mmap_write_lock() is held. Retain pud_trans_unstable(), which has one use in __handle_mm_fault(), but delete its equivalent pud_none_or_trans_huge_or_dev_or_clear_bad(). While there, move the default arch_needs_pgtable_deposit() definition up near where pgtable_trans_huge_deposit() and withdraw() are declared. Link: https://lkml.kernel.org/r/5abdab3-3136-b42e-274d-9c6281bfb79@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 09:50:37 +08:00
#ifndef arch_needs_pgtable_deposit
#define arch_needs_pgtable_deposit() (false)
#endif
asm-generic: provide generic_pmdp_establish() Patch series "Do not lose dirty bit on THP pages", v4. Vlastimil noted that pmdp_invalidate() is not atomic and we can lose dirty and access bits if CPU sets them after pmdp dereference, but before set_pmd_at(). The bug can lead to data loss, but the race window is tiny and I haven't seen any reports that suggested that it happens in reality. So I don't think it worth sending it to stable. Unfortunately, there's no way to address the issue in a generic way. We need to fix all architectures that support THP one-by-one. All architectures that have THP supported have to provide atomic pmdp_invalidate() that returns previous value. If generic implementation of pmdp_invalidate() is used, architecture needs to provide atomic pmdp_estabish(). pmdp_estabish() is not used out-side generic implementation of pmdp_invalidate() so far, but I think this can change in the future. This patch (of 12): This is an implementation of pmdp_establish() that is only suitable for an architecture that doesn't have hardware dirty/accessed bits. In this case we can't race with CPU which sets these bits and non-atomic approach is fine. Link: http://lkml.kernel.org/r/20171213105756.69879-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Daney <david.daney@cavium.com> Cc: David Miller <davem@davemloft.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nitin Gupta <nitin.m.gupta@oracle.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 08:17:43 +08:00
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
/*
* This is an implementation of pmdp_establish() that is only suitable for an
* architecture that doesn't have hardware dirty/accessed bits. In this case we
* can't race with CPU which sets these bits and non-atomic approach is fine.
asm-generic: provide generic_pmdp_establish() Patch series "Do not lose dirty bit on THP pages", v4. Vlastimil noted that pmdp_invalidate() is not atomic and we can lose dirty and access bits if CPU sets them after pmdp dereference, but before set_pmd_at(). The bug can lead to data loss, but the race window is tiny and I haven't seen any reports that suggested that it happens in reality. So I don't think it worth sending it to stable. Unfortunately, there's no way to address the issue in a generic way. We need to fix all architectures that support THP one-by-one. All architectures that have THP supported have to provide atomic pmdp_invalidate() that returns previous value. If generic implementation of pmdp_invalidate() is used, architecture needs to provide atomic pmdp_estabish(). pmdp_estabish() is not used out-side generic implementation of pmdp_invalidate() so far, but I think this can change in the future. This patch (of 12): This is an implementation of pmdp_establish() that is only suitable for an architecture that doesn't have hardware dirty/accessed bits. In this case we can't race with CPU which sets these bits and non-atomic approach is fine. Link: http://lkml.kernel.org/r/20171213105756.69879-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Daney <david.daney@cavium.com> Cc: David Miller <davem@davemloft.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nitin Gupta <nitin.m.gupta@oracle.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 08:17:43 +08:00
*/
static inline pmd_t generic_pmdp_establish(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp, pmd_t pmd)
{
pmd_t old_pmd = *pmdp;
set_pmd_at(vma->vm_mm, address, pmdp, pmd);
return old_pmd;
}
#endif
#ifndef __HAVE_ARCH_PMDP_INVALIDATE
extern pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp);
#endif
#ifndef __HAVE_ARCH_PMDP_INVALIDATE_AD
/*
* pmdp_invalidate_ad() invalidates the PMD while changing a transparent
* hugepage mapping in the page tables. This function is similar to
* pmdp_invalidate(), but should only be used if the access and dirty bits would
* not be cleared by the software in the new PMD value. The function ensures
* that hardware changes of the access and dirty bits updates would not be lost.
*
* Doing so can allow in certain architectures to avoid a TLB flush in most
* cases. Yet, another TLB flush might be necessary later if the PMD update
* itself requires such flush (e.g., if protection was set to be stricter). Yet,
* even when a TLB flush is needed because of the update, the caller may be able
* to batch these TLB flushing operations, so fewer TLB flush operations are
* needed.
*/
extern pmd_t pmdp_invalidate_ad(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp);
#endif
#ifndef __HAVE_ARCH_PTE_SAME
static inline int pte_same(pte_t pte_a, pte_t pte_b)
{
return pte_val(pte_a) == pte_val(pte_b);
}
#endif
#ifndef __HAVE_ARCH_PTE_UNUSED
/*
* Some architectures provide facilities to virtualization guests
* so that they can flag allocated pages as unused. This allows the
* host to transparently reclaim unused pages. This function returns
* whether the pte's page is unused.
*/
static inline int pte_unused(pte_t pte)
{
return 0;
}
#endif
#ifndef pte_access_permitted
#define pte_access_permitted(pte, write) \
(pte_present(pte) && (!(write) || pte_write(pte)))
#endif
#ifndef pmd_access_permitted
#define pmd_access_permitted(pmd, write) \
(pmd_present(pmd) && (!(write) || pmd_write(pmd)))
#endif
#ifndef pud_access_permitted
#define pud_access_permitted(pud, write) \
(pud_present(pud) && (!(write) || pud_write(pud)))
#endif
#ifndef p4d_access_permitted
#define p4d_access_permitted(p4d, write) \
(p4d_present(p4d) && (!(write) || p4d_write(p4d)))
#endif
#ifndef pgd_access_permitted
#define pgd_access_permitted(pgd, write) \
(pgd_present(pgd) && (!(write) || pgd_write(pgd)))
#endif
#ifndef __HAVE_ARCH_PMD_SAME
static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
{
return pmd_val(pmd_a) == pmd_val(pmd_b);
}
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
static inline int pud_same(pud_t pud_a, pud_t pud_b)
{
return pud_val(pud_a) == pud_val(pud_b);
}
#endif
#ifndef __HAVE_ARCH_P4D_SAME
static inline int p4d_same(p4d_t p4d_a, p4d_t p4d_b)
{
return p4d_val(p4d_a) == p4d_val(p4d_b);
}
#endif
#ifndef __HAVE_ARCH_PGD_SAME
static inline int pgd_same(pgd_t pgd_a, pgd_t pgd_b)
{
return pgd_val(pgd_a) == pgd_val(pgd_b);
}
#endif
2018-12-05 05:37:16 +08:00
/*
* Use set_p*_safe(), and elide TLB flushing, when confident that *no*
* TLB flush will be required as a result of the "set". For example, use
* in scenarios where it is known ahead of time that the routine is
* setting non-present entries, or re-setting an existing entry to the
* same value. Otherwise, use the typical "set" helpers and flush the
* TLB.
*/
#define set_pte_safe(ptep, pte) \
({ \
WARN_ON_ONCE(pte_present(*ptep) && !pte_same(*ptep, pte)); \
set_pte(ptep, pte); \
})
#define set_pmd_safe(pmdp, pmd) \
({ \
WARN_ON_ONCE(pmd_present(*pmdp) && !pmd_same(*pmdp, pmd)); \
set_pmd(pmdp, pmd); \
})
#define set_pud_safe(pudp, pud) \
({ \
WARN_ON_ONCE(pud_present(*pudp) && !pud_same(*pudp, pud)); \
set_pud(pudp, pud); \
})
#define set_p4d_safe(p4dp, p4d) \
({ \
WARN_ON_ONCE(p4d_present(*p4dp) && !p4d_same(*p4dp, p4d)); \
set_p4d(p4dp, p4d); \
})
#define set_pgd_safe(pgdp, pgd) \
({ \
WARN_ON_ONCE(pgd_present(*pgdp) && !pgd_same(*pgdp, pgd)); \
set_pgd(pgdp, pgd); \
})
#ifndef __HAVE_ARCH_DO_SWAP_PAGE
/*
* Some architectures support metadata associated with a page. When a
* page is being swapped out, this metadata must be saved so it can be
* restored when the page is swapped back in. SPARC M7 and newer
* processors support an ADI (Application Data Integrity) tag for the
* page as metadata for the page. arch_do_swap_page() can restore this
* metadata when a page is swapped back in.
*/
static inline void arch_do_swap_page(struct mm_struct *mm,
struct vm_area_struct *vma,
unsigned long addr,
pte_t pte, pte_t oldpte)
{
}
#endif
#ifndef __HAVE_ARCH_UNMAP_ONE
/*
* Some architectures support metadata associated with a page. When a
* page is being swapped out, this metadata must be saved so it can be
* restored when the page is swapped back in. SPARC M7 and newer
* processors support an ADI (Application Data Integrity) tag for the
* page as metadata for the page. arch_unmap_one() can save this
* metadata on a swap-out of a page.
*/
static inline int arch_unmap_one(struct mm_struct *mm,
struct vm_area_struct *vma,
unsigned long addr,
pte_t orig_pte)
{
return 0;
}
#endif
/*
* Allow architectures to preserve additional metadata associated with
* swapped-out pages. The corresponding __HAVE_ARCH_SWAP_* macros and function
* prototypes must be defined in the arch-specific asm/pgtable.h file.
*/
#ifndef __HAVE_ARCH_PREPARE_TO_SWAP
static inline int arch_prepare_to_swap(struct page *page)
{
return 0;
}
#endif
#ifndef __HAVE_ARCH_SWAP_INVALIDATE
static inline void arch_swap_invalidate_page(int type, pgoff_t offset)
{
}
static inline void arch_swap_invalidate_area(int type)
{
}
#endif
#ifndef __HAVE_ARCH_SWAP_RESTORE
static inline void arch_swap_restore(swp_entry_t entry, struct folio *folio)
{
}
#endif
#ifndef __HAVE_ARCH_PGD_OFFSET_GATE
#define pgd_offset_gate(mm, addr) pgd_offset(mm, addr)
#endif
#ifndef __HAVE_ARCH_MOVE_PTE
#define move_pte(pte, prot, old_addr, new_addr) (pte)
#endif
#ifndef pte_accessible
mm: fix TLB flush race between migration, and change_protection_range There are a few subtle races, between change_protection_range (used by mprotect and change_prot_numa) on one side, and NUMA page migration and compaction on the other side. The basic race is that there is a time window between when the PTE gets made non-present (PROT_NONE or NUMA), and the TLB is flushed. During that time, a CPU may continue writing to the page. This is fine most of the time, however compaction or the NUMA migration code may come in, and migrate the page away. When that happens, the CPU may continue writing, through the cached translation, to what is no longer the current memory location of the process. This only affects x86, which has a somewhat optimistic pte_accessible. All other architectures appear to be safe, and will either always flush, or flush whenever there is a valid mapping, even with no permissions (SPARC). The basic race looks like this: CPU A CPU B CPU C load TLB entry make entry PTE/PMD_NUMA fault on entry read/write old page start migrating page change PTE/PMD to new page read/write old page [*] flush TLB reload TLB from new entry read/write new page lose data [*] the old page may belong to a new user at this point! The obvious fix is to flush remote TLB entries, by making sure that pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may still be accessible if there is a TLB flush pending for the mm. This should fix both NUMA migration and compaction. [mgorman@suse.de: fix build] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-19 09:08:44 +08:00
# define pte_accessible(mm, pte) ((void)(pte), 1)
#endif
#ifndef flush_tlb_fix_spurious_fault
#define flush_tlb_fix_spurious_fault(vma, address, ptep) flush_tlb_page(vma, address)
#endif
/*
* When walking page tables, get the address of the next boundary,
* or the end address of the range if that comes earlier. Although no
* vma end wraps to 0, rounded up __boundary may wrap to 0 throughout.
*/
#define pgd_addr_end(addr, end) \
({ unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK; \
(__boundary - 1 < (end) - 1)? __boundary: (end); \
})
#ifndef p4d_addr_end
#define p4d_addr_end(addr, end) \
({ unsigned long __boundary = ((addr) + P4D_SIZE) & P4D_MASK; \
(__boundary - 1 < (end) - 1)? __boundary: (end); \
})
#endif
#ifndef pud_addr_end
#define pud_addr_end(addr, end) \
({ unsigned long __boundary = ((addr) + PUD_SIZE) & PUD_MASK; \
(__boundary - 1 < (end) - 1)? __boundary: (end); \
})
#endif
#ifndef pmd_addr_end
#define pmd_addr_end(addr, end) \
({ unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK; \
(__boundary - 1 < (end) - 1)? __boundary: (end); \
})
#endif
/*
* When walking page tables, we usually want to skip any p?d_none entries;
* and any p?d_bad entries - reporting the error before resetting to none.
* Do the tests inline, but report and clear the bad entry in mm/memory.c.
*/
void pgd_clear_bad(pgd_t *);
#ifndef __PAGETABLE_P4D_FOLDED
void p4d_clear_bad(p4d_t *);
#else
#define p4d_clear_bad(p4d) do { } while (0)
#endif
#ifndef __PAGETABLE_PUD_FOLDED
void pud_clear_bad(pud_t *);
#else
#define pud_clear_bad(p4d) do { } while (0)
#endif
void pmd_clear_bad(pmd_t *);
static inline int pgd_none_or_clear_bad(pgd_t *pgd)
{
if (pgd_none(*pgd))
return 1;
if (unlikely(pgd_bad(*pgd))) {
pgd_clear_bad(pgd);
return 1;
}
return 0;
}
static inline int p4d_none_or_clear_bad(p4d_t *p4d)
{
if (p4d_none(*p4d))
return 1;
if (unlikely(p4d_bad(*p4d))) {
p4d_clear_bad(p4d);
return 1;
}
return 0;
}
static inline int pud_none_or_clear_bad(pud_t *pud)
{
if (pud_none(*pud))
return 1;
if (unlikely(pud_bad(*pud))) {
pud_clear_bad(pud);
return 1;
}
return 0;
}
static inline int pmd_none_or_clear_bad(pmd_t *pmd)
{
if (pmd_none(*pmd))
return 1;
if (unlikely(pmd_bad(*pmd))) {
pmd_clear_bad(pmd);
return 1;
}
return 0;
}
static inline pte_t __ptep_modify_prot_start(struct vm_area_struct *vma,
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
unsigned long addr,
pte_t *ptep)
{
/*
* Get the current pte state, but zero it out to make it
* non-present, preventing the hardware from asynchronously
* updating it.
*/
return ptep_get_and_clear(vma->vm_mm, addr, ptep);
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
}
static inline void __ptep_modify_prot_commit(struct vm_area_struct *vma,
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
unsigned long addr,
pte_t *ptep, pte_t pte)
{
/*
* The pte is non-present, so there's no hardware state to
* preserve.
*/
set_pte_at(vma->vm_mm, addr, ptep, pte);
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
}
#ifndef __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
/*
* Start a pte protection read-modify-write transaction, which
* protects against asynchronous hardware modifications to the pte.
* The intention is not to prevent the hardware from making pte
* updates, but to prevent any updates it may make from being lost.
*
* This does not protect against other software modifications of the
* pte; the appropriate pte lock must be held over the transaction.
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
*
* Note that this interface is intended to be batchable, meaning that
* ptep_modify_prot_commit may not actually update the pte, but merely
* queue the update to be done at some later time. The update must be
* actually committed before the pte lock is released, however.
*/
static inline pte_t ptep_modify_prot_start(struct vm_area_struct *vma,
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
unsigned long addr,
pte_t *ptep)
{
return __ptep_modify_prot_start(vma, addr, ptep);
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
}
/*
* Commit an update to a pte, leaving any hardware-controlled bits in
* the PTE unmodified.
*/
static inline void ptep_modify_prot_commit(struct vm_area_struct *vma,
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
unsigned long addr,
pte_t *ptep, pte_t old_pte, pte_t pte)
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
{
__ptep_modify_prot_commit(vma, addr, ptep, pte);
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
}
#endif /* __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION */
#endif /* CONFIG_MMU */
mm: add a ptep_modify_prot transaction abstraction This patch adds an API for doing read-modify-write updates to a pte's protection bits which may race against hardware updates to the pte. After reading the pte, the hardware may asynchonously set the accessed or dirty bits on a pte, which would be lost when writing back the modified pte value. The existing technique to handle this race is to use ptep_get_and_clear() atomically fetch the old pte value and clear it in memory. This has the effect of marking the pte as non-present, which will prevent the hardware from updating its state. When the new value is written back, the pte will be present again, and the hardware can resume updating the access/dirty flags. When running in a virtualized environment, pagetable updates are relatively expensive, since they generally involve some trap into the hypervisor. To mitigate the cost of these updates, we tend to batch them. However, because of the atomic nature of ptep_get_and_clear(), it is inherently non-batchable. This new interface allows batching by giving the underlying implementation enough information to open a transaction between the read and write phases: ptep_modify_prot_start() returns the current pte value, and puts the pte entry into a state where either the hardware will not update the pte, or if it does, the updates will be preserved on commit. ptep_modify_prot_commit() writes back the updated pte, makes sure that any hardware updates made since ptep_modify_prot_start() are preserved. ptep_modify_prot_start() and _commit() must be exactly paired, and used while holding the appropriate pte lock. They do not protect against other software updates of the pte in any way. The current implementations of ptep_modify_prot_start and _commit are functionally unchanged from before: _start() uses ptep_get_and_clear() fetch the pte and zero the entry, preventing any hardware updates. _commit() simply writes the new pte value back knowing that the hardware has not updated the pte in the meantime. The only current user of this interface is mprotect Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 19:30:00 +08:00
x86/mm: Provide general kernel support for memory encryption Changes to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask. The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute. Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not. Also, an early initialization function is added for SME. If SME is active, this function: - Updates the early_pmd_flags so that early page faults create mappings with the encryption mask. - Updates the __supported_pte_mask to include the encryption mask. - Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b36e952c4c39767ae7f0a41cf5345adf27438480.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:07 +08:00
/*
* No-op macros that just return the current protection value. Defined here
* because these macros can be used even if CONFIG_MMU is not defined.
x86/mm: Provide general kernel support for memory encryption Changes to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask. The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute. Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not. Also, an early initialization function is added for SME. If SME is active, this function: - Updates the early_pmd_flags so that early page faults create mappings with the encryption mask. - Updates the __supported_pte_mask to include the encryption mask. - Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b36e952c4c39767ae7f0a41cf5345adf27438480.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:07 +08:00
*/
#ifndef pgprot_nx
#define pgprot_nx(prot) (prot)
#endif
#ifndef pgprot_noncached
#define pgprot_noncached(prot) (prot)
#endif
#ifndef pgprot_writecombine
#define pgprot_writecombine pgprot_noncached
#endif
#ifndef pgprot_writethrough
#define pgprot_writethrough pgprot_noncached
#endif
#ifndef pgprot_device
#define pgprot_device pgprot_noncached
#endif
#ifndef pgprot_mhp
#define pgprot_mhp(prot) (prot)
#endif
#ifdef CONFIG_MMU
#ifndef pgprot_modify
#define pgprot_modify pgprot_modify
static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
{
if (pgprot_val(oldprot) == pgprot_val(pgprot_noncached(oldprot)))
newprot = pgprot_noncached(newprot);
if (pgprot_val(oldprot) == pgprot_val(pgprot_writecombine(oldprot)))
newprot = pgprot_writecombine(newprot);
if (pgprot_val(oldprot) == pgprot_val(pgprot_device(oldprot)))
newprot = pgprot_device(newprot);
return newprot;
}
#endif
#endif /* CONFIG_MMU */
x86/mm: Provide general kernel support for memory encryption Changes to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask. The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute. Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not. Also, an early initialization function is added for SME. If SME is active, this function: - Updates the early_pmd_flags so that early page faults create mappings with the encryption mask. - Updates the __supported_pte_mask to include the encryption mask. - Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b36e952c4c39767ae7f0a41cf5345adf27438480.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:07 +08:00
#ifndef pgprot_encrypted
#define pgprot_encrypted(prot) (prot)
#endif
#ifndef pgprot_decrypted
#define pgprot_decrypted(prot) (prot)
#endif
/*
* A facility to provide lazy MMU batching. This allows PTE updates and
* page invalidations to be delayed until a call to leave lazy MMU mode
* is issued. Some architectures may benefit from doing this, and it is
* beneficial for both shadow and direct mode hypervisors, which may batch
* the PTE updates which happen during this window. Note that using this
* interface requires that read hazards be removed from the code. A read
* hazard could result in the direct mode hypervisor case, since the actual
* write to the page tables may not yet have taken place, so reads though
* a raw PTE pointer after it has been modified are not guaranteed to be
* up to date. This mode can only be entered and left under the protection of
* the page table locks for all page tables which may be modified. In the UP
* case, this is required so that preemption is disabled, and in the SMP case,
* it must synchronize the delayed page table writes properly on other CPUs.
*/
#ifndef __HAVE_ARCH_ENTER_LAZY_MMU_MODE
#define arch_enter_lazy_mmu_mode() do {} while (0)
#define arch_leave_lazy_mmu_mode() do {} while (0)
#define arch_flush_lazy_mmu_mode() do {} while (0)
#endif
/*
* A facility to provide batching of the reload of page tables and
* other process state with the actual context switch code for
* paravirtualized guests. By convention, only one of the batched
* update (lazy) modes (CPU, MMU) should be active at any given time,
* entry should never be nested, and entry and exits should always be
* paired. This is for sanity of maintaining and reasoning about the
* kernel code. In this case, the exit (end of the context switch) is
* in architecture-specific code, and so doesn't need a generic
* definition.
*/
#ifndef __HAVE_ARCH_START_CONTEXT_SWITCH
#define arch_start_context_switch(prev) do {} while (0)
#endif
#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
#ifndef CONFIG_ARCH_ENABLE_THP_MIGRATION
static inline pmd_t pmd_swp_mksoft_dirty(pmd_t pmd)
{
return pmd;
}
static inline int pmd_swp_soft_dirty(pmd_t pmd)
{
return 0;
}
static inline pmd_t pmd_swp_clear_soft_dirty(pmd_t pmd)
{
return pmd;
}
#endif
#else /* !CONFIG_HAVE_ARCH_SOFT_DIRTY */
mm: soft-dirty bits for user memory changes tracking The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:01:20 +08:00
static inline int pte_soft_dirty(pte_t pte)
{
return 0;
}
static inline int pmd_soft_dirty(pmd_t pmd)
{
return 0;
}
static inline pte_t pte_mksoft_dirty(pte_t pte)
{
return pte;
}
static inline pmd_t pmd_mksoft_dirty(pmd_t pmd)
{
return pmd;
}
static inline pte_t pte_clear_soft_dirty(pte_t pte)
{
return pte;
}
static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
{
return pmd;
}
static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
{
return pte;
}
static inline int pte_swp_soft_dirty(pte_t pte)
{
return 0;
}
static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
{
return pte;
}
static inline pmd_t pmd_swp_mksoft_dirty(pmd_t pmd)
{
return pmd;
}
static inline int pmd_swp_soft_dirty(pmd_t pmd)
{
return 0;
}
static inline pmd_t pmd_swp_clear_soft_dirty(pmd_t pmd)
{
return pmd;
}
mm: soft-dirty bits for user memory changes tracking The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:01:20 +08:00
#endif
#ifndef __HAVE_PFNMAP_TRACKING
/*
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
* Interfaces that can be used by architecture code to keep track of
* memory type of pfn mappings specified by the remap_pfn_range,
* vmf_insert_pfn.
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
*/
/*
* track_pfn_remap is called when a _new_ pfn mapping is being established
* by remap_pfn_range() for physical range indicated by pfn and size.
*/
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
static inline int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:34 +08:00
unsigned long pfn, unsigned long addr,
unsigned long size)
{
return 0;
}
/*
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
* track_pfn_insert is called when a _new_ single pfn is established
* by vmf_insert_pfn().
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
*/
static inline void track_pfn_insert(struct vm_area_struct *vma, pgprot_t *prot,
pfn_t pfn)
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
{
}
/*
* track_pfn_copy is called when vma that is covering the pfnmap gets
* copied through copy_page_range().
*/
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
static inline int track_pfn_copy(struct vm_area_struct *vma)
{
return 0;
}
/*
x86/mm/pat: Add untrack_pfn_moved for mremap mremap() with MREMAP_FIXED on a VM_PFNMAP range causes the following WARN_ON_ONCE() message in untrack_pfn(). WARNING: CPU: 1 PID: 3493 at arch/x86/mm/pat.c:985 untrack_pfn+0xbd/0xd0() Call Trace: [<ffffffff817729ea>] dump_stack+0x45/0x57 [<ffffffff8109e4b6>] warn_slowpath_common+0x86/0xc0 [<ffffffff8109e5ea>] warn_slowpath_null+0x1a/0x20 [<ffffffff8106a88d>] untrack_pfn+0xbd/0xd0 [<ffffffff811d2d5e>] unmap_single_vma+0x80e/0x860 [<ffffffff811d3725>] unmap_vmas+0x55/0xb0 [<ffffffff811d916c>] unmap_region+0xac/0x120 [<ffffffff811db86a>] do_munmap+0x28a/0x460 [<ffffffff811dec33>] move_vma+0x1b3/0x2e0 [<ffffffff811df113>] SyS_mremap+0x3b3/0x510 [<ffffffff817793ee>] entry_SYSCALL_64_fastpath+0x12/0x71 MREMAP_FIXED moves a pfnmap from old vma to new vma. untrack_pfn() is called with the old vma after its pfnmap page table has been removed, which causes follow_phys() to fail. The new vma has a new pfnmap to the same pfn & cache type with VM_PAT set. Therefore, we only need to clear VM_PAT from the old vma in this case. Add untrack_pfn_moved(), which clears VM_PAT from a given old vma. move_vma() is changed to call this function with the old vma when VM_PFNMAP is set. move_vma() then calls do_munmap(), and untrack_pfn() is a no-op since VM_PAT is cleared. Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1450832064-10093-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-23 08:54:23 +08:00
* untrack_pfn is called while unmapping a pfnmap for a region.
* untrack can be called for a specific region indicated by pfn and size or
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
* can be for the entire vma (in which case pfn, size are zero).
*/
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
static inline void untrack_pfn(struct vm_area_struct *vma,
mm: introduce __vm_flags_mod and use it in untrack_pfn There are scenarios when vm_flags can be modified without exclusive mmap_lock, such as: - after VMA was isolated and mmap_lock was downgraded or dropped - in exit_mmap when there are no other mm users and locking is unnecessary Introduce __vm_flags_mod to avoid assertions when the caller takes responsibility for the required locking. Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for flags modification to avoid assertion. Link: https://lkml.kernel.org/r/20230126193752.297968-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-27 03:37:51 +08:00
unsigned long pfn, unsigned long size,
bool mm_wr_locked)
{
}
x86/mm/pat: Add untrack_pfn_moved for mremap mremap() with MREMAP_FIXED on a VM_PFNMAP range causes the following WARN_ON_ONCE() message in untrack_pfn(). WARNING: CPU: 1 PID: 3493 at arch/x86/mm/pat.c:985 untrack_pfn+0xbd/0xd0() Call Trace: [<ffffffff817729ea>] dump_stack+0x45/0x57 [<ffffffff8109e4b6>] warn_slowpath_common+0x86/0xc0 [<ffffffff8109e5ea>] warn_slowpath_null+0x1a/0x20 [<ffffffff8106a88d>] untrack_pfn+0xbd/0xd0 [<ffffffff811d2d5e>] unmap_single_vma+0x80e/0x860 [<ffffffff811d3725>] unmap_vmas+0x55/0xb0 [<ffffffff811d916c>] unmap_region+0xac/0x120 [<ffffffff811db86a>] do_munmap+0x28a/0x460 [<ffffffff811dec33>] move_vma+0x1b3/0x2e0 [<ffffffff811df113>] SyS_mremap+0x3b3/0x510 [<ffffffff817793ee>] entry_SYSCALL_64_fastpath+0x12/0x71 MREMAP_FIXED moves a pfnmap from old vma to new vma. untrack_pfn() is called with the old vma after its pfnmap page table has been removed, which causes follow_phys() to fail. The new vma has a new pfnmap to the same pfn & cache type with VM_PAT set. Therefore, we only need to clear VM_PAT from the old vma in this case. Add untrack_pfn_moved(), which clears VM_PAT from a given old vma. move_vma() is changed to call this function with the old vma when VM_PFNMAP is set. move_vma() then calls do_munmap(), and untrack_pfn() is a no-op since VM_PAT is cleared. Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1450832064-10093-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-23 08:54:23 +08:00
/*
* untrack_pfn_clear is called while mremapping a pfnmap for a new region
* or fails to copy pgtable during duplicate vm area.
x86/mm/pat: Add untrack_pfn_moved for mremap mremap() with MREMAP_FIXED on a VM_PFNMAP range causes the following WARN_ON_ONCE() message in untrack_pfn(). WARNING: CPU: 1 PID: 3493 at arch/x86/mm/pat.c:985 untrack_pfn+0xbd/0xd0() Call Trace: [<ffffffff817729ea>] dump_stack+0x45/0x57 [<ffffffff8109e4b6>] warn_slowpath_common+0x86/0xc0 [<ffffffff8109e5ea>] warn_slowpath_null+0x1a/0x20 [<ffffffff8106a88d>] untrack_pfn+0xbd/0xd0 [<ffffffff811d2d5e>] unmap_single_vma+0x80e/0x860 [<ffffffff811d3725>] unmap_vmas+0x55/0xb0 [<ffffffff811d916c>] unmap_region+0xac/0x120 [<ffffffff811db86a>] do_munmap+0x28a/0x460 [<ffffffff811dec33>] move_vma+0x1b3/0x2e0 [<ffffffff811df113>] SyS_mremap+0x3b3/0x510 [<ffffffff817793ee>] entry_SYSCALL_64_fastpath+0x12/0x71 MREMAP_FIXED moves a pfnmap from old vma to new vma. untrack_pfn() is called with the old vma after its pfnmap page table has been removed, which causes follow_phys() to fail. The new vma has a new pfnmap to the same pfn & cache type with VM_PAT set. Therefore, we only need to clear VM_PAT from the old vma in this case. Add untrack_pfn_moved(), which clears VM_PAT from a given old vma. move_vma() is changed to call this function with the old vma when VM_PFNMAP is set. move_vma() then calls do_munmap(), and untrack_pfn() is a no-op since VM_PAT is cleared. Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1450832064-10093-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-23 08:54:23 +08:00
*/
static inline void untrack_pfn_clear(struct vm_area_struct *vma)
x86/mm/pat: Add untrack_pfn_moved for mremap mremap() with MREMAP_FIXED on a VM_PFNMAP range causes the following WARN_ON_ONCE() message in untrack_pfn(). WARNING: CPU: 1 PID: 3493 at arch/x86/mm/pat.c:985 untrack_pfn+0xbd/0xd0() Call Trace: [<ffffffff817729ea>] dump_stack+0x45/0x57 [<ffffffff8109e4b6>] warn_slowpath_common+0x86/0xc0 [<ffffffff8109e5ea>] warn_slowpath_null+0x1a/0x20 [<ffffffff8106a88d>] untrack_pfn+0xbd/0xd0 [<ffffffff811d2d5e>] unmap_single_vma+0x80e/0x860 [<ffffffff811d3725>] unmap_vmas+0x55/0xb0 [<ffffffff811d916c>] unmap_region+0xac/0x120 [<ffffffff811db86a>] do_munmap+0x28a/0x460 [<ffffffff811dec33>] move_vma+0x1b3/0x2e0 [<ffffffff811df113>] SyS_mremap+0x3b3/0x510 [<ffffffff817793ee>] entry_SYSCALL_64_fastpath+0x12/0x71 MREMAP_FIXED moves a pfnmap from old vma to new vma. untrack_pfn() is called with the old vma after its pfnmap page table has been removed, which causes follow_phys() to fail. The new vma has a new pfnmap to the same pfn & cache type with VM_PAT set. Therefore, we only need to clear VM_PAT from the old vma in this case. Add untrack_pfn_moved(), which clears VM_PAT from a given old vma. move_vma() is changed to call this function with the old vma when VM_PFNMAP is set. move_vma() then calls do_munmap(), and untrack_pfn() is a no-op since VM_PAT is cleared. Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1450832064-10093-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-23 08:54:23 +08:00
{
}
#else
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
extern int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:34 +08:00
unsigned long pfn, unsigned long addr,
unsigned long size);
extern void track_pfn_insert(struct vm_area_struct *vma, pgprot_t *prot,
pfn_t pfn);
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:29 +08:00
extern int track_pfn_copy(struct vm_area_struct *vma);
extern void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
mm: introduce __vm_flags_mod and use it in untrack_pfn There are scenarios when vm_flags can be modified without exclusive mmap_lock, such as: - after VMA was isolated and mmap_lock was downgraded or dropped - in exit_mmap when there are no other mm users and locking is unnecessary Introduce __vm_flags_mod to avoid assertions when the caller takes responsibility for the required locking. Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for flags modification to avoid assertion. Link: https://lkml.kernel.org/r/20230126193752.297968-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-27 03:37:51 +08:00
unsigned long size, bool mm_wr_locked);
extern void untrack_pfn_clear(struct vm_area_struct *vma);
#endif
mm/gup: do not migrate zero page On some platforms ZERO_PAGE(0) might end-up in a movable zone. Do not migrate zero page in gup during longterm pinning as migration of zero page is not allowed. For example, in x86 QEMU with 16G of memory and kernelcore=5G parameter, I see the following: Boot#1: zero_pfn 0x48a8d zero_pfn zone: ZONE_DMA32 Boot#2: zero_pfn 0x20168d zero_pfn zone: ZONE_MOVABLE On x86, empty_zero_page is declared in .bss and depending on the loader may end up in different physical locations during boots. Also, move is_zero_pfn() my_zero_pfn() functions under CONFIG_MMU, because zero_pfn that they are using is declared in memory.c which is compiled with CONFIG_MMU. Link: https://lkml.kernel.org/r/20210215161349.246722-9-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 09:39:04 +08:00
#ifdef CONFIG_MMU
#ifdef __HAVE_COLOR_ZERO_PAGE
static inline int is_zero_pfn(unsigned long pfn)
{
extern unsigned long zero_pfn;
unsigned long offset_from_zero_pfn = pfn - zero_pfn;
return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT);
}
#define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr))
#else
static inline int is_zero_pfn(unsigned long pfn)
{
extern unsigned long zero_pfn;
return pfn == zero_pfn;
}
static inline unsigned long my_zero_pfn(unsigned long addr)
{
extern unsigned long zero_pfn;
return zero_pfn;
}
#endif
mm/gup: do not migrate zero page On some platforms ZERO_PAGE(0) might end-up in a movable zone. Do not migrate zero page in gup during longterm pinning as migration of zero page is not allowed. For example, in x86 QEMU with 16G of memory and kernelcore=5G parameter, I see the following: Boot#1: zero_pfn 0x48a8d zero_pfn zone: ZONE_DMA32 Boot#2: zero_pfn 0x20168d zero_pfn zone: ZONE_MOVABLE On x86, empty_zero_page is declared in .bss and depending on the loader may end up in different physical locations during boots. Also, move is_zero_pfn() my_zero_pfn() functions under CONFIG_MMU, because zero_pfn that they are using is declared in memory.c which is compiled with CONFIG_MMU. Link: https://lkml.kernel.org/r/20210215161349.246722-9-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 09:39:04 +08:00
#else
static inline int is_zero_pfn(unsigned long pfn)
{
return 0;
}
static inline unsigned long my_zero_pfn(unsigned long addr)
{
return 0;
}
#endif /* CONFIG_MMU */
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.38+] Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 07:33:42 +08:00
#ifdef CONFIG_MMU
#ifndef CONFIG_TRANSPARENT_HUGEPAGE
static inline int pmd_trans_huge(pmd_t pmd)
{
return 0;
}
#ifndef pmd_write
static inline int pmd_write(pmd_t pmd)
{
BUG();
return 0;
}
#endif /* pmd_write */
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.38+] Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 07:33:42 +08:00
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
mm: fix device-dax pud write-faults triggered by get_user_pages() Currently only get_user_pages_fast() can safely handle the writable gup case due to its use of pud_access_permitted() to check whether the pud entry is writable. In the gup slow path pud_write() is used instead of pud_access_permitted() and to date it has been unimplemented, just calls BUG_ON(). kernel BUG at ./include/linux/hugetlb.h:244! [..] RIP: 0010:follow_devmap_pud+0x482/0x490 [..] Call Trace: follow_page_mask+0x28c/0x6e0 __get_user_pages+0xe4/0x6c0 get_user_pages_unlocked+0x130/0x1b0 get_user_pages_fast+0x89/0xb0 iov_iter_get_pages_alloc+0x114/0x4a0 nfs_direct_read_schedule_iovec+0xd2/0x350 ? nfs_start_io_direct+0x63/0x70 nfs_file_direct_read+0x1e0/0x250 nfs_file_read+0x90/0xc0 For now this just implements a simple check for the _PAGE_RW bit similar to pmd_write. However, this implies that the gup-slow-path check is missing the extra checks that the gup-fast-path performs with pud_access_permitted. Later patches will align all checks to use the 'access_permitted' helper if the architecture provides it. Note that the generic 'access_permitted' helper fallback is the simple _PAGE_RW check on architectures that do not define the 'access_permitted' helper(s). [dan.j.williams@intel.com: fix powerpc compile error] Link: http://lkml.kernel.org/r/151129126165.37405.16031785266675461397.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/151043109938.2842.14834662818213616199.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: a00cc7d9dd93 ("mm, x86: add support for PUD-sized transparent hugepages") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:06 +08:00
#ifndef pud_write
static inline int pud_write(pud_t pud)
{
BUG();
return 0;
}
#endif /* pud_write */
#if !defined(CONFIG_ARCH_HAS_PTE_DEVMAP) || !defined(CONFIG_TRANSPARENT_HUGEPAGE)
static inline int pmd_devmap(pmd_t pmd)
{
return 0;
}
static inline int pud_devmap(pud_t pud)
{
return 0;
}
static inline int pgd_devmap(pgd_t pgd)
{
return 0;
}
#endif
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#if !defined(CONFIG_TRANSPARENT_HUGEPAGE) || \
!defined(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
static inline int pud_trans_huge(pud_t pud)
{
return 0;
}
#endif
mm/pgtable: delete pmd_trans_unstable() and friends Delete pmd_trans_unstable, pmd_none_or_trans_huge_or_clear_bad() and pmd_devmap_trans_unstable(), all now unused. With mixed feelings, delete all the comments on pmd_trans_unstable(). That was very good documentation of a subtle state, and this series does not even eliminate that state: but rather, normalizes and extends it, asking pte_offset_map[_lock]() callers to anticipate failure, without regard for whether mmap_read_lock() or mmap_write_lock() is held. Retain pud_trans_unstable(), which has one use in __handle_mm_fault(), but delete its equivalent pud_none_or_trans_huge_or_dev_or_clear_bad(). While there, move the default arch_needs_pgtable_deposit() definition up near where pgtable_trans_huge_deposit() and withdraw() are declared. Link: https://lkml.kernel.org/r/5abdab3-3136-b42e-274d-9c6281bfb79@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 09:50:37 +08:00
static inline int pud_trans_unstable(pud_t *pud)
{
mm/pgtable: delete pmd_trans_unstable() and friends Delete pmd_trans_unstable, pmd_none_or_trans_huge_or_clear_bad() and pmd_devmap_trans_unstable(), all now unused. With mixed feelings, delete all the comments on pmd_trans_unstable(). That was very good documentation of a subtle state, and this series does not even eliminate that state: but rather, normalizes and extends it, asking pte_offset_map[_lock]() callers to anticipate failure, without regard for whether mmap_read_lock() or mmap_write_lock() is held. Retain pud_trans_unstable(), which has one use in __handle_mm_fault(), but delete its equivalent pud_none_or_trans_huge_or_dev_or_clear_bad(). While there, move the default arch_needs_pgtable_deposit() definition up near where pgtable_trans_huge_deposit() and withdraw() are declared. Link: https://lkml.kernel.org/r/5abdab3-3136-b42e-274d-9c6281bfb79@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 09:50:37 +08:00
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) && \
defined(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)
pud_t pudval = READ_ONCE(*pud);
if (pud_none(pudval) || pud_trans_huge(pudval) || pud_devmap(pudval))
return 1;
if (unlikely(pud_bad(pudval))) {
pud_clear_bad(pud);
return 1;
}
#endif
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.38+] Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 07:33:42 +08:00
return 0;
}
#ifndef CONFIG_NUMA_BALANCING
/*
* Technically a PTE can be PROTNONE even when not doing NUMA balancing but
* the only case the kernel cares is for NUMA balancing and is only ever set
* when the VMA is accessible. For PROT_NONE VMAs, the PTEs are not marked
* _PAGE_PROTNONE so by default, implement the helper as "always no". It
* is the responsibility of the caller to distinguish between PROT_NONE
* protections and NUMA hinting fault protections.
*/
static inline int pte_protnone(pte_t pte)
{
return 0;
}
static inline int pmd_protnone(pmd_t pmd)
{
return 0;
}
#endif /* CONFIG_NUMA_BALANCING */
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.38+] Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 07:33:42 +08:00
#endif /* CONFIG_MMU */
#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
#ifndef __PAGETABLE_P4D_FOLDED
int p4d_set_huge(p4d_t *p4d, phys_addr_t addr, pgprot_t prot);
void p4d_clear_huge(p4d_t *p4d);
#else
static inline int p4d_set_huge(p4d_t *p4d, phys_addr_t addr, pgprot_t prot)
{
return 0;
}
static inline void p4d_clear_huge(p4d_t *p4d) { }
#endif /* !__PAGETABLE_P4D_FOLDED */
int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot);
int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot);
Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge" This reverts commit c742199a014de23ee92055c2473d91fe5561ffdf. c742199a014d ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge") breaks arm64 in at least two ways for configurations where PUD or PMD folding occur: 1. We no longer install huge-vmap mappings and silently fall back to page-granular entries, despite being able to install block entries at what is effectively the PGD level. 2. If the linear map is backed with block mappings, these will now silently fail to be created in alloc_init_pud(), causing a panic early during boot. The pgtable selftests caught this, although a fix has not been forthcoming and Christophe is AWOL at the moment, so just revert the change for now to get a working -rc3 on which we can queue patches for 5.15. A simple revert breaks the build for 32-bit PowerPC 8xx machines, which rely on the default function definitions when the corresponding page-table levels are folded, since commit a6a8f7c4aa7e ("powerpc/8xx: add support for huge pages on VMAP and VMALLOC"), eg: powerpc64-linux-ld: mm/vmalloc.o: in function `vunmap_pud_range': linux/mm/vmalloc.c:362: undefined reference to `pud_clear_huge' To avoid that, add stubs for pud_clear_huge() and pmd_clear_huge() in arch/powerpc/mm/nohash/8xx.c as suggested by Christophe. Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: c742199a014d ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> [mpe: Fold in 8xx.c changes from Christophe and mention in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/linux-arm-kernel/CAMuHMdXShORDox-xxaeUfDW3wx2PeggFSqhVSHVZNKCGK-y_vQ@mail.gmail.com/ Link: https://lore.kernel.org/r/20210717160118.9855-1-jonathan@marek.ca Link: https://lore.kernel.org/r/87r1fs1762.fsf@mpe.ellerman.id.au Signed-off-by: Will Deacon <will@kernel.org>
2021-07-21 15:02:13 +08:00
int pud_clear_huge(pud_t *pud);
int pmd_clear_huge(pmd_t *pmd);
int p4d_free_pud_page(p4d_t *p4d, unsigned long addr);
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 22:13:47 +08:00
int pud_free_pmd_page(pud_t *pud, unsigned long addr);
int pmd_free_pte_page(pmd_t *pmd, unsigned long addr);
#else /* !CONFIG_HAVE_ARCH_HUGE_VMAP */
static inline int p4d_set_huge(p4d_t *p4d, phys_addr_t addr, pgprot_t prot)
{
return 0;
}
static inline int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
{
return 0;
}
static inline int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
{
return 0;
}
static inline void p4d_clear_huge(p4d_t *p4d) { }
static inline int pud_clear_huge(pud_t *pud)
{
return 0;
}
static inline int pmd_clear_huge(pmd_t *pmd)
{
return 0;
}
static inline int p4d_free_pud_page(p4d_t *p4d, unsigned long addr)
{
return 0;
}
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 22:13:47 +08:00
static inline int pud_free_pmd_page(pud_t *pud, unsigned long addr)
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 07:17:20 +08:00
{
return 0;
}
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 22:13:47 +08:00
static inline int pmd_free_pte_page(pmd_t *pmd, unsigned long addr)
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 07:17:20 +08:00
{
return 0;
}
#endif /* CONFIG_HAVE_ARCH_HUGE_VMAP */
#ifndef __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
/*
* ARCHes with special requirements for evicting THP backing TLB entries can
* implement this. Otherwise also, it can help optimize normal TLB flush in
* THP regime. Stock flush_tlb_range() typically has optimization to nuke the
* entire TLB if flush span is greater than a threshold, which will
* likely be true for a single huge page. Thus a single THP flush will
* invalidate the entire TLB which is not desirable.
* e.g. see arch/arc: flush_pmd_tlb_range
*/
#define flush_pmd_tlb_range(vma, addr, end) flush_tlb_range(vma, addr, end)
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#define flush_pud_tlb_range(vma, addr, end) flush_tlb_range(vma, addr, end)
#else
#define flush_pmd_tlb_range(vma, addr, end) BUILD_BUG()
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
#define flush_pud_tlb_range(vma, addr, end) BUILD_BUG()
#endif
#endif
struct file;
int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t *vma_prot);
#ifndef CONFIG_X86_ESPFIX64
static inline void init_espfix_bsp(void) { }
#endif
extern void __init pgtable_cache_init(void);
#ifndef __HAVE_ARCH_PFN_MODIFY_ALLOWED
static inline bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot)
{
return true;
}
static inline bool arch_has_pfn_modify_check(void)
{
return false;
}
#endif /* !_HAVE_ARCH_PFN_MODIFY_ALLOWED */
/*
* Architecture PAGE_KERNEL_* fallbacks
*
* Some architectures don't define certain PAGE_KERNEL_* flags. This is either
* because they really don't support them, or the port needs to be updated to
* reflect the required functionality. Below are a set of relatively safe
* fallbacks, as best effort, which we can count on in lieu of the architectures
* not defining them on their own yet.
*/
#ifndef PAGE_KERNEL_RO
# define PAGE_KERNEL_RO PAGE_KERNEL
#endif
#ifndef PAGE_KERNEL_EXEC
# define PAGE_KERNEL_EXEC PAGE_KERNEL
#endif
mm: add functions to track page directory modifications Patch series "mm: Get rid of vmalloc_sync_(un)mappings()", v3. After the recent issue with vmalloc and tracing code[1] on x86 and a long history of previous issues related to the vmalloc_sync_mappings() interface, I thought the time has come to remove it. Please see [2], [3], and [4] for some other issues in the past. The patches add tracking of page-table directory changes to the vmalloc and ioremap code. Depending on which page-table levels changes have been made, a new per-arch function is called: arch_sync_kernel_mappings(). On x86-64 with 4-level paging, this function will not be called more than 64 times in a systems runtime (because vmalloc-space takes 64 PGD entries which are only populated, but never cleared). As a side effect this also allows to get rid of vmalloc faults on x86, making it safe to touch vmalloc'ed memory in the page-fault handler. Note that this potentially includes per-cpu memory. This patch (of 7): Add page-table allocation functions which will keep track of changed directory entries. They are needed for new PGD, P4D, PUD, and PMD entries and will be used in vmalloc and ioremap code to decide whether any changes in the kernel mappings need to be synchronized between page-tables in the system. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200515140023.25469-1-joro@8bytes.org Link: http://lkml.kernel.org/r/20200515140023.25469-2-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 12:52:18 +08:00
/*
* Page Table Modification bits for pgtbl_mod_mask.
*
* These are used by the p?d_alloc_track*() set of functions an in the generic
* vmalloc/ioremap code to track at which page-table levels entries have been
* modified. Based on that the code can better decide when vmalloc and ioremap
* mapping changes need to be synchronized to other page-tables in the system.
*/
#define __PGTBL_PGD_MODIFIED 0
#define __PGTBL_P4D_MODIFIED 1
#define __PGTBL_PUD_MODIFIED 2
#define __PGTBL_PMD_MODIFIED 3
#define __PGTBL_PTE_MODIFIED 4
#define PGTBL_PGD_MODIFIED BIT(__PGTBL_PGD_MODIFIED)
#define PGTBL_P4D_MODIFIED BIT(__PGTBL_P4D_MODIFIED)
#define PGTBL_PUD_MODIFIED BIT(__PGTBL_PUD_MODIFIED)
#define PGTBL_PMD_MODIFIED BIT(__PGTBL_PMD_MODIFIED)
#define PGTBL_PTE_MODIFIED BIT(__PGTBL_PTE_MODIFIED)
/* Page-Table Modification Mask */
typedef unsigned int pgtbl_mod_mask;
#endif /* !__ASSEMBLY__ */
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-12 00:52:58 +08:00
#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT)
#ifdef CONFIG_PHYS_ADDR_T_64BIT
/*
* ZSMALLOC needs to know the highest PFN on 32-bit architectures
* with physical address space extension, but falls back to
* BITS_PER_LONG otherwise.
*/
#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition
#else
#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif
#endif
arch: fix has_transparent_hugepage() I've just discovered that the useful-sounding has_transparent_hugepage() is actually an architecture-dependent minefield: on some arches it only builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when not, but on some of those (arm and arm64) it then gives the wrong answer; and on mips alone it's marked __init, which would crash if called later (but so far it has not been called later). Straighten this out: make it available to all configs, with a sensible default in asm-generic/pgtable.h, removing its definitions from those arches (arc, arm, arm64, sparc, tile) which are served by the default, adding #define has_transparent_hugepage has_transparent_hugepage to those (mips, powerpc, s390, x86) which need to override the default at runtime, and removing the __init from mips (but maybe that kind of code should be avoided after init: set a static variable the first time it's called). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [arch/s390] Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 08:13:00 +08:00
#ifndef has_transparent_hugepage
#define has_transparent_hugepage() IS_BUILTIN(CONFIG_TRANSPARENT_HUGEPAGE)
arch: fix has_transparent_hugepage() I've just discovered that the useful-sounding has_transparent_hugepage() is actually an architecture-dependent minefield: on some arches it only builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when not, but on some of those (arm and arm64) it then gives the wrong answer; and on mips alone it's marked __init, which would crash if called later (but so far it has not been called later). Straighten this out: make it available to all configs, with a sensible default in asm-generic/pgtable.h, removing its definitions from those arches (arc, arm, arm64, sparc, tile) which are served by the default, adding #define has_transparent_hugepage has_transparent_hugepage to those (mips, powerpc, s390, x86) which need to override the default at runtime, and removing the __init from mips (but maybe that kind of code should be avoided after init: set a static variable the first time it's called). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [arch/s390] Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 08:13:00 +08:00
#endif
/*
* On some architectures it depends on the mm if the p4d/pud or pmd
* layer of the page table hierarchy is folded or not.
*/
#ifndef mm_p4d_folded
#define mm_p4d_folded(mm) __is_defined(__PAGETABLE_P4D_FOLDED)
#endif
#ifndef mm_pud_folded
#define mm_pud_folded(mm) __is_defined(__PAGETABLE_PUD_FOLDED)
#endif
#ifndef mm_pmd_folded
#define mm_pmd_folded(mm) __is_defined(__PAGETABLE_PMD_FOLDED)
#endif
mm/gup: fix gup_fast with dynamic page table folding Currently to make sure that every page table entry is read just once gup_fast walks perform READ_ONCE and pass pXd value down to the next gup_pXd_range function by value e.g.: static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) ... pudp = pud_offset(&p4d, addr); This function passes a reference on that local value copy to pXd_offset, and might get the very same pointer in return. This happens when the level is folded (on most arches), and that pointer should not be iterated. On s390 due to the fact that each task might have different 5,4 or 3-level address translation and hence different levels folded the logic is more complex and non-iteratable pointer to a local copy leads to severe problems. Here is an example of what happens with gup_fast on s390, for a task with 3-level paging, crossing a 2 GB pud boundary: // addr = 0x1007ffff000, end = 0x10080001000 static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) { unsigned long next; pud_t *pudp; // pud_offset returns &p4d itself (a pointer to a value on stack) pudp = pud_offset(&p4d, addr); do { // on second iteratation reading "random" stack value pud_t pud = READ_ONCE(*pudp); // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390 next = pud_addr_end(addr, end); ... } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack return 1; } This happens since s390 moved to common gup code with commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code"). s390 tried to mimic static level folding by changing pXd_offset primitives to always calculate top level page table offset in pgd_offset and just return the value passed when pXd_offset has to act as folded. What is crucial for gup_fast and what has been overlooked is that PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly. And the latter is not possible with dynamic folding. To fix the issue in addition to pXd values pass original pXdp pointers down to gup_pXd_range functions. And introduce pXd_offset_lockless helpers, which take an additional pXd entry value parameter. This has already been discussed in https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1 Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.2+] Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-26 12:19:10 +08:00
#ifndef p4d_offset_lockless
#define p4d_offset_lockless(pgdp, pgd, address) p4d_offset(&(pgd), address)
#endif
#ifndef pud_offset_lockless
#define pud_offset_lockless(p4dp, p4d, address) pud_offset(&(p4d), address)
#endif
#ifndef pmd_offset_lockless
#define pmd_offset_lockless(pudp, pud, address) pmd_offset(&(pud), address)
#endif
mm: add generic p?d_leaf() macros Patch series "Generic page walk and ptdump", v17. Many architectures current have a debugfs file for dumping the kernel page tables. Currently each architecture has to implement custom functions for this because the details of walking the page tables used by the kernel are different between architectures. This series extends the capabilities of walk_page_range() so that it can deal with the page tables of the kernel (which have no VMAs and can contain larger huge pages than exist for user space). A generic PTDUMP implementation is the implemented making use of the new functionality of walk_page_range() and finally arm64 and x86 are switch to using it, removing the custom table walkers. To enable a generic page table walker to walk the unusual mappings of the kernel we need to implement a set of functions which let us know when the walker has reached the leaf entry. After a suggestion from Will Deacon I've chosen the name p?d_leaf() as this (hopefully) describes the purpose (and is a new name so has no historic baggage). Some architectures have p?d_large macros but this is easily confused with "large pages". This series ends with a generic PTDUMP implemention for arm64 and x86. Mostly this is a clean up and there should be very little functional change. The exceptions are: * arm64 PTDUMP debugfs now displays pages which aren't present (patch 22). * arm64 has the ability to efficiently process KASAN pages (which previously only x86 implemented). This means that the combination of KASAN and DEBUG_WX is now useable. This patch (of 23): Exposing the pud/pgd levels of the page tables to walk_page_range() means we may come across the exotic large mappings that come with large areas of contiguous memory (such as the kernel's linear map). For architectures that don't provide all p?d_leaf() macros, provide generic do nothing default that are suitable where there cannot be leaf pages at that level. Futher patches will add implementations for individual architectures. The name p?d_leaf() is chosen to minimize the confusion with existing uses of "large" pages and "huge" pages which do not necessary mean that the entry is a leaf (for example it may be a set of contiguous entries that only take 1 TLB slot). For the purpose of walking the page tables we don't need to know how it will be represented in the TLB, but we do need to know for sure if it is a leaf of the tree. Link: http://lkml.kernel.org/r/20191218162402.45610-2-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <jhogan@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 09:35:01 +08:00
/*
* p?d_leaf() - true if this entry is a final mapping to a physical address.
* This differs from p?d_huge() by the fact that they are always available (if
* the architecture supports large pages at the appropriate level) even
* if CONFIG_HUGETLB_PAGE is not defined.
* Only meaningful when called on a valid entry.
*/
#ifndef pgd_leaf
#define pgd_leaf(x) 0
#endif
#ifndef p4d_leaf
#define p4d_leaf(x) 0
#endif
#ifndef pud_leaf
#define pud_leaf(x) 0
#endif
#ifndef pmd_leaf
#define pmd_leaf(x) 0
#endif
#ifndef pgd_leaf_size
#define pgd_leaf_size(x) (1ULL << PGDIR_SHIFT)
#endif
#ifndef p4d_leaf_size
#define p4d_leaf_size(x) P4D_SIZE
#endif
#ifndef pud_leaf_size
#define pud_leaf_size(x) PUD_SIZE
#endif
#ifndef pmd_leaf_size
#define pmd_leaf_size(x) PMD_SIZE
#endif
#ifndef pte_leaf_size
#define pte_leaf_size(x) PAGE_SIZE
#endif
/*
* Some architectures have MMUs that are configurable or selectable at boot
* time. These lead to variable PTRS_PER_x. For statically allocated arrays it
* helps to have a static maximum value.
*/
#ifndef MAX_PTRS_PER_PTE
#define MAX_PTRS_PER_PTE PTRS_PER_PTE
#endif
#ifndef MAX_PTRS_PER_PMD
#define MAX_PTRS_PER_PMD PTRS_PER_PMD
#endif
#ifndef MAX_PTRS_PER_PUD
#define MAX_PTRS_PER_PUD PTRS_PER_PUD
#endif
#ifndef MAX_PTRS_PER_P4D
#define MAX_PTRS_PER_P4D PTRS_PER_P4D
#endif
mm/mmap: define DECLARE_VM_GET_PAGE_PROT This just converts the generic vm_get_page_prot() implementation into a new macro i.e DECLARE_VM_GET_PAGE_PROT which later can be used across platforms when enabling them with ARCH_HAS_VM_GET_PAGE_PROT. This does not create any functional change. Link: https://lkml.kernel.org/r/20220711070600.2378316-3-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-11 15:05:36 +08:00
/* description of effects of mapping type and prot in current implementation.
* this is due to the limited x86 page protection hardware. The expected
* behavior is in parens:
*
* map_type prot
* PROT_NONE PROT_READ PROT_WRITE PROT_EXEC
* MAP_SHARED r: (no) no r: (yes) yes r: (no) yes r: (no) yes
* w: (no) no w: (no) no w: (yes) yes w: (no) no
* x: (no) no x: (no) yes x: (no) yes x: (yes) yes
*
* MAP_PRIVATE r: (no) no r: (yes) yes r: (no) yes r: (no) yes
* w: (no) no w: (no) no w: (copy) copy w: (no) no
* x: (no) no x: (no) yes x: (no) yes x: (yes) yes
*
* On arm64, PROT_EXEC has the following behaviour for both MAP_SHARED and
* MAP_PRIVATE (with Enhanced PAN supported):
* r: (no) no
* w: (no) no
* x: (yes) yes
*/
#define DECLARE_VM_GET_PAGE_PROT \
pgprot_t vm_get_page_prot(unsigned long vm_flags) \
{ \
return protection_map[vm_flags & \
(VM_READ | VM_WRITE | VM_EXEC | VM_SHARED)]; \
} \
EXPORT_SYMBOL(vm_get_page_prot);
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:32:38 +08:00
#endif /* _LINUX_PGTABLE_H */