OpenCloudOS-Kernel/kernel/events/uprobes.c

2350 lines
57 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/*
* User-space Probes (UProbes)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* Copyright (C) IBM Corporation, 2008-2012
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* Authors:
* Srikar Dronamraju
* Jim Keniston
* Copyright (C) 2011-2012 Red Hat, Inc., Peter Zijlstra
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
#include <linux/kernel.h>
#include <linux/highmem.h>
#include <linux/pagemap.h> /* read_mapping_page */
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/sched/mm.h>
#include <linux/sched/coredump.h>
#include <linux/export.h>
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
#include <linux/rmap.h> /* anon_vma_prepare */
#include <linux/mmu_notifier.h> /* set_pte_at_notify */
#include <linux/swap.h> /* try_to_free_swap */
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
#include <linux/ptrace.h> /* user_enable_single_step */
#include <linux/kdebug.h> /* notifier mechanism */
#include "../../mm/internal.h" /* munlock_vma_page */
#include <linux/percpu-rwsem.h>
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-14 03:18:44 +08:00
#include <linux/task_work.h>
#include <linux/shmem_fs.h>
#include <linux/khugepaged.h>
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
#include <linux/uprobes.h>
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
#define UINSNS_PER_PAGE (PAGE_SIZE/UPROBE_XOL_SLOT_BYTES)
#define MAX_UPROBE_XOL_SLOTS UINSNS_PER_PAGE
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
static struct rb_root uprobes_tree = RB_ROOT;
/*
* allows us to skip the uprobe_mmap if there are no uprobe events active
* at this time. Probably a fine grained per inode count is better?
*/
#define no_uprobe_events() RB_EMPTY_ROOT(&uprobes_tree)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
static DEFINE_SPINLOCK(uprobes_treelock); /* serialize rbtree access */
#define UPROBES_HASH_SZ 13
/* serialize uprobe->pending_list */
static struct mutex uprobes_mmap_mutex[UPROBES_HASH_SZ];
#define uprobes_mmap_hash(v) (&uprobes_mmap_mutex[((unsigned long)(v)) % UPROBES_HASH_SZ])
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
DEFINE_STATIC_PERCPU_RWSEM(dup_mmap_sem);
/* Have a copy of original instruction */
#define UPROBE_COPY_INSN 0
struct uprobe {
struct rb_node rb_node; /* node in the rb tree */
uprobes: convert uprobe.ref to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable uprobe.ref is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the uprobe.ref it might make a difference in following places: - put_uprobe(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Link: http://lkml.kernel.org/r/1547637627-29526-1-git-send-email-elena.reshetova@intel.com Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-01-16 19:20:27 +08:00
refcount_t ref;
struct rw_semaphore register_rwsem;
struct rw_semaphore consumer_rwsem;
struct list_head pending_list;
struct uprobe_consumer *consumers;
struct inode *inode; /* Also hold a ref to inode */
loff_t offset;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
loff_t ref_ctr_offset;
unsigned long flags;
/*
* The generic code assumes that it has two members of unknown type
* owned by the arch-specific code:
*
* insn - copy_insn() saves the original instruction here for
* arch_uprobe_analyze_insn().
*
* ixol - potentially modified instruction to execute out of
* line, copied to xol_area by xol_get_insn_slot().
*/
struct arch_uprobe arch;
};
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
struct delayed_uprobe {
struct list_head list;
struct uprobe *uprobe;
struct mm_struct *mm;
};
static DEFINE_MUTEX(delayed_uprobe_lock);
static LIST_HEAD(delayed_uprobe_list);
/*
* Execute out of line area: anonymous executable mapping installed
* by the probed task to execute the copy of the original instruction
* mangled by set_swbp().
*
* On a breakpoint hit, thread contests for a slot. It frees the
* slot after singlestep. Currently a fixed number of slots are
* allocated.
*/
struct xol_area {
wait_queue_head_t wq; /* if all slots are busy */
atomic_t slot_count; /* number of in-use slots */
unsigned long *bitmap; /* 0 = free slot */
struct vm_special_mapping xol_mapping;
struct page *pages[2];
/*
* We keep the vma's vm_start rather than a pointer to the vma
* itself. The probed process or a naughty kernel module could make
* the vma go away, and we must handle that reasonably gracefully.
*/
unsigned long vaddr; /* Page(s) of instruction slots */
};
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/*
* valid_vma: Verify if the specified vma is an executable vma
* Relax restrictions while unregistering: vm_flags might have
* changed after breakpoint was inserted.
* - is_register: indicates if we are in register context.
* - Return 1 if the specified virtual address is in an
* executable vma.
*/
static bool valid_vma(struct vm_area_struct *vma, bool is_register)
{
vm_flags_t flags = VM_HUGETLB | VM_MAYEXEC | VM_MAYSHARE;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (is_register)
flags |= VM_WRITE;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return vma->vm_file && (vma->vm_flags & flags) == VM_MAYEXEC;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static unsigned long offset_to_vaddr(struct vm_area_struct *vma, loff_t offset)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
return vma->vm_start + offset - ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static loff_t vaddr_to_offset(struct vm_area_struct *vma, unsigned long vaddr)
{
return ((loff_t)vma->vm_pgoff << PAGE_SHIFT) + (vaddr - vma->vm_start);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/**
* __replace_page - replace page in vma by new page.
* based on replace_page in mm/ksm.c
*
* @vma: vma that holds the pte pointing to page
* @addr: address the old @page is mapped at
* @old_page: the page we are replacing by new_page
* @new_page: the modified page we replace page by
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* If @new_page is NULL, only unmap @old_page.
*
* Returns 0 on success, negative error code otherwise.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
static int __replace_page(struct vm_area_struct *vma, unsigned long addr,
struct page *old_page, struct page *new_page)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct mm_struct *mm = vma->vm_mm;
struct page_vma_mapped_walk pvmw = {
.page = compound_head(old_page),
.vma = vma,
.address = addr,
};
int err;
struct mmu_notifier_range range;
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:20 +08:00
struct mem_cgroup *memcg;
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma, mm, addr,
mm/mmu_notifier: contextual information for event triggering invalidation CPU page table update can happens for many reasons, not only as a result of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as a result of kernel activities (memory compression, reclaim, migration, ...). Users of mmu notifier API track changes to the CPU page table and take specific action for them. While current API only provide range of virtual address affected by the change, not why the changes is happening. This patchset do the initial mechanical convertion of all the places that calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP event as well as the vma if it is know (most invalidation happens against a given vma). Passing down the vma allows the users of mmu notifier to inspect the new vma page protection. The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier should assume that every for the range is going away when that event happens. A latter patch do convert mm call path to use a more appropriate events for each call. This is done as 2 patches so that no call site is forgotten especialy as it uses this following coccinelle patch: %<---------------------------------------------------------------------- @@ identifier I1, I2, I3, I4; @@ static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1, +enum mmu_notifier_event event, +unsigned flags, +struct vm_area_struct *vma, struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... } @@ @@ -#define mmu_notifier_range_init(range, mm, start, end) +#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end) @@ expression E1, E3, E4; identifier I1; @@ <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, I1, I1->vm_mm, E3, E4) ...> @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(..., struct vm_area_struct *VMA, ...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(...) { struct vm_area_struct *VMA; <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN; @@ FN(...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, NULL, E2, E3, E4) ...> } ---------------------------------------------------------------------->% Applied with: spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place spatch --sp-file mmu-notifier.spatch --dir mm --in-place Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:20:49 +08:00
addr + PAGE_SIZE);
if (new_page) {
err = mem_cgroup_try_charge(new_page, vma->vm_mm, GFP_KERNEL,
&memcg, false);
if (err)
return err;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* For try_to_free_swap() and munlock_vma_page() below */
lock_page(old_page);
mmu_notifier_invalidate_range_start(&range);
err = -EAGAIN;
if (!page_vma_mapped_walk(&pvmw)) {
if (new_page)
mem_cgroup_cancel_charge(new_page, memcg, false);
goto unlock;
}
VM_BUG_ON_PAGE(addr != pvmw.address, old_page);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (new_page) {
get_page(new_page);
page_add_new_anon_rmap(new_page, vma, addr, false);
mem_cgroup_commit_charge(new_page, memcg, false, false);
lru_cache_add_active_or_unevictable(new_page, vma);
} else
/* no new page, just dec_mm_counter for old_page */
dec_mm_counter(mm, MM_ANONPAGES);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (!PageAnon(old_page)) {
dec_mm_counter(mm, mm_counter_file(old_page));
inc_mm_counter(mm, MM_ANONPAGES);
}
flush_cache_page(vma, addr, pte_pfn(*pvmw.pte));
ptep_clear_flush_notify(vma, addr, pvmw.pte);
if (new_page)
set_pte_at_notify(mm, addr, pvmw.pte,
mk_pte(new_page, vma->vm_page_prot));
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
page_remove_rmap(old_page, false);
if (!page_mapped(old_page))
try_to_free_swap(old_page);
page_vma_mapped_walk_done(&pvmw);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (vma->vm_flags & VM_LOCKED)
munlock_vma_page(old_page);
put_page(old_page);
err = 0;
unlock:
mmu_notifier_invalidate_range_end(&range);
unlock_page(old_page);
return err;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
/**
* is_swbp_insn - check if instruction is breakpoint instruction.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* @insn: instruction to be checked.
* Default implementation of is_swbp_insn
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* Returns true if @insn is a breakpoint instruction.
*/
bool __weak is_swbp_insn(uprobe_opcode_t *insn)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
return *insn == UPROBE_SWBP_INSN;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
/**
* is_trap_insn - check if instruction is breakpoint instruction.
* @insn: instruction to be checked.
* Default implementation of is_trap_insn
* Returns true if @insn is a breakpoint instruction.
*
* This function is needed for the case where an architecture has multiple
* trap instructions (like powerpc).
*/
bool __weak is_trap_insn(uprobe_opcode_t *insn)
{
return is_swbp_insn(insn);
}
static void copy_from_page(struct page *page, unsigned long vaddr, void *dst, int len)
{
void *kaddr = kmap_atomic(page);
memcpy(dst, kaddr + (vaddr & ~PAGE_MASK), len);
kunmap_atomic(kaddr);
}
static void copy_to_page(struct page *page, unsigned long vaddr, const void *src, int len)
{
void *kaddr = kmap_atomic(page);
memcpy(kaddr + (vaddr & ~PAGE_MASK), src, len);
kunmap_atomic(kaddr);
}
static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *new_opcode)
{
uprobe_opcode_t old_opcode;
bool is_swbp;
/*
* Note: We only check if the old_opcode is UPROBE_SWBP_INSN here.
* We do not check if it is any other 'trap variant' which could
* be conditional trap instruction such as the one powerpc supports.
*
* The logic is that we do not care if the underlying instruction
* is a trap variant; uprobes always wins over any other (gdb)
* breakpoint.
*/
copy_from_page(page, vaddr, &old_opcode, UPROBE_SWBP_INSN_SIZE);
is_swbp = is_swbp_insn(&old_opcode);
if (is_swbp_insn(new_opcode)) {
if (is_swbp) /* register: already installed? */
return 0;
} else {
if (!is_swbp) /* unregister: was it changed by us? */
return 0;
}
return 1;
}
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
static struct delayed_uprobe *
delayed_uprobe_check(struct uprobe *uprobe, struct mm_struct *mm)
{
struct delayed_uprobe *du;
list_for_each_entry(du, &delayed_uprobe_list, list)
if (du->uprobe == uprobe && du->mm == mm)
return du;
return NULL;
}
static int delayed_uprobe_add(struct uprobe *uprobe, struct mm_struct *mm)
{
struct delayed_uprobe *du;
if (delayed_uprobe_check(uprobe, mm))
return 0;
du = kzalloc(sizeof(*du), GFP_KERNEL);
if (!du)
return -ENOMEM;
du->uprobe = uprobe;
du->mm = mm;
list_add(&du->list, &delayed_uprobe_list);
return 0;
}
static void delayed_uprobe_delete(struct delayed_uprobe *du)
{
if (WARN_ON(!du))
return;
list_del(&du->list);
kfree(du);
}
static void delayed_uprobe_remove(struct uprobe *uprobe, struct mm_struct *mm)
{
struct list_head *pos, *q;
struct delayed_uprobe *du;
if (!uprobe && !mm)
return;
list_for_each_safe(pos, q, &delayed_uprobe_list) {
du = list_entry(pos, struct delayed_uprobe, list);
if (uprobe && du->uprobe != uprobe)
continue;
if (mm && du->mm != mm)
continue;
delayed_uprobe_delete(du);
}
}
static bool valid_ref_ctr_vma(struct uprobe *uprobe,
struct vm_area_struct *vma)
{
unsigned long vaddr = offset_to_vaddr(vma, uprobe->ref_ctr_offset);
return uprobe->ref_ctr_offset &&
vma->vm_file &&
file_inode(vma->vm_file) == uprobe->inode &&
(vma->vm_flags & (VM_WRITE|VM_SHARED)) == VM_WRITE &&
vma->vm_start <= vaddr &&
vma->vm_end > vaddr;
}
static struct vm_area_struct *
find_ref_ctr_vma(struct uprobe *uprobe, struct mm_struct *mm)
{
struct vm_area_struct *tmp;
for (tmp = mm->mmap; tmp; tmp = tmp->vm_next)
if (valid_ref_ctr_vma(uprobe, tmp))
return tmp;
return NULL;
}
static int
__update_ref_ctr(struct mm_struct *mm, unsigned long vaddr, short d)
{
void *kaddr;
struct page *page;
struct vm_area_struct *vma;
int ret;
short *ptr;
if (!vaddr || !d)
return -EINVAL;
ret = get_user_pages_remote(NULL, mm, vaddr, 1,
FOLL_WRITE, &page, &vma, NULL);
if (unlikely(ret <= 0)) {
/*
* We are asking for 1 page. If get_user_pages_remote() fails,
* it may return 0, in that case we have to return error.
*/
return ret == 0 ? -EBUSY : ret;
}
kaddr = kmap_atomic(page);
ptr = kaddr + (vaddr & ~PAGE_MASK);
if (unlikely(*ptr + d < 0)) {
pr_warn("ref_ctr going negative. vaddr: 0x%lx, "
"curr val: %d, delta: %d\n", vaddr, *ptr, d);
ret = -EINVAL;
goto out;
}
*ptr += d;
ret = 0;
out:
kunmap_atomic(kaddr);
put_page(page);
return ret;
}
static void update_ref_ctr_warn(struct uprobe *uprobe,
struct mm_struct *mm, short d)
{
pr_warn("ref_ctr %s failed for inode: 0x%lx offset: "
"0x%llx ref_ctr_offset: 0x%llx of mm: 0x%pK\n",
d > 0 ? "increment" : "decrement", uprobe->inode->i_ino,
(unsigned long long) uprobe->offset,
(unsigned long long) uprobe->ref_ctr_offset, mm);
}
static int update_ref_ctr(struct uprobe *uprobe, struct mm_struct *mm,
short d)
{
struct vm_area_struct *rc_vma;
unsigned long rc_vaddr;
int ret = 0;
rc_vma = find_ref_ctr_vma(uprobe, mm);
if (rc_vma) {
rc_vaddr = offset_to_vaddr(rc_vma, uprobe->ref_ctr_offset);
ret = __update_ref_ctr(mm, rc_vaddr, d);
if (ret)
update_ref_ctr_warn(uprobe, mm, d);
if (d > 0)
return ret;
}
mutex_lock(&delayed_uprobe_lock);
if (d > 0)
ret = delayed_uprobe_add(uprobe, mm);
else
delayed_uprobe_remove(uprobe, mm);
mutex_unlock(&delayed_uprobe_lock);
return ret;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/*
* NOTE:
* Expect the breakpoint instruction to be the smallest size instruction for
* the architecture. If an arch has variable length instruction and the
* breakpoint instruction is not of the smallest length instruction
* supported by that architecture then we need to modify is_trap_at_addr and
* uprobe_write_opcode accordingly. This would never be a problem for archs
* that have fixed length instructions.
*
* uprobe_write_opcode - write the opcode at a given virtual address.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* @mm: the probed process address space.
* @vaddr: the virtual address to store the opcode.
* @opcode: opcode to be written at @vaddr.
*
* Called with mm->mmap_sem held for write.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* Return 0 (success) or a negative errno.
*/
int uprobe_write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
unsigned long vaddr, uprobe_opcode_t opcode)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
struct uprobe *uprobe;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
struct page *old_page, *new_page;
struct vm_area_struct *vma;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
int ret, is_register, ref_ctr_updated = 0;
bool orig_page_huge = false;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
is_register = is_swbp_insn(&opcode);
uprobe = container_of(auprobe, struct uprobe, arch);
retry:
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* Read the page with vaddr into memory */
uprobes: split THPs before trying to replace them Patch series "Fix few rmap-related THP bugs", v3. The patchset fixes handing PTE-mapped THPs in page_referenced() and page_idle_clear_pte_refs(). To achieve that I've intrdocued new helper -- page_vma_mapped_walk() -- which replaces all page_check_address{,_transhuge}() and covers all THP cases. Patchset overview: - First patch fixes one uprobe bug (unrelated to the rest of the patchset, just spotted it at the same time); - Patches 2-5 fix handling PTE-mapped THPs in page_referenced(), page_idle_clear_pte_refs() and rmap core; - Patches 6-12 convert all page_check_address{,_transhuge}() users (plus remove_migration_pte()) to page_vma_mapped_walk() and drop unused helpers. I think the fixes are not critical enough for stable@ as they don't lead to crashes or hangs, only suboptimal behaviour. This patch (of 12): For THPs page_check_address() always fails. It leads to endless loop in uprobe_write_opcode(). Testcase with huge-tmpfs (uprobes cannot probe anonymous memory). mount -t debugfs none /sys/kernel/debug mount -t tmpfs -o huge=always none /mnt gcc -Wall -O2 -o /mnt/test -x c - <<EOF int main(void) { return 0; } /* Padding to map the code segment with huge pmd */ asm (".zero 2097152"); EOF echo 'p /mnt/test:0' > /sys/kernel/debug/tracing/uprobe_events echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable /mnt/test Let's split THPs before trying to replace. Link: http://lkml.kernel.org/r/20170129173858.45174-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:42 +08:00
ret = get_user_pages_remote(NULL, mm, vaddr, 1,
FOLL_FORCE | FOLL_SPLIT_PMD, &old_page, &vma, NULL);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (ret <= 0)
return ret;
ret = verify_opcode(old_page, vaddr, &opcode);
if (ret <= 0)
goto put_old;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
/* We are going to replace instruction, update ref_ctr. */
if (!ref_ctr_updated && uprobe->ref_ctr_offset) {
ret = update_ref_ctr(uprobe, mm, is_register ? 1 : -1);
if (ret)
goto put_old;
ref_ctr_updated = 1;
}
ret = 0;
if (!is_register && !PageAnon(old_page))
goto put_old;
ret = anon_vma_prepare(vma);
if (ret)
goto put_old;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
ret = -ENOMEM;
new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr);
if (!new_page)
goto put_old;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
__SetPageUptodate(new_page);
copy_highpage(new_page, old_page);
copy_to_page(new_page, vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (!is_register) {
struct page *orig_page;
pgoff_t index;
VM_BUG_ON_PAGE(!PageAnon(old_page), old_page);
index = vaddr_to_offset(vma, vaddr & PAGE_MASK) >> PAGE_SHIFT;
orig_page = find_get_page(vma->vm_file->f_inode->i_mapping,
index);
if (orig_page) {
if (PageUptodate(orig_page) &&
pages_identical(new_page, orig_page)) {
/* let go new_page */
put_page(new_page);
new_page = NULL;
if (PageCompound(orig_page))
orig_page_huge = true;
}
put_page(orig_page);
}
}
ret = __replace_page(vma, vaddr, old_page, new_page);
if (new_page)
put_page(new_page);
put_old:
put_page(old_page);
if (unlikely(ret == -EAGAIN))
goto retry;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
/* Revert back reference counter if instruction update failed. */
if (ret && is_register && ref_ctr_updated)
update_ref_ctr(uprobe, mm, -1);
/* try collapse pmd for compound page */
if (!ret && orig_page_huge)
collapse_pte_mapped_thp(mm, vaddr);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return ret;
}
/**
* set_swbp - store breakpoint at a given address.
* @auprobe: arch specific probepoint information.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* @mm: the probed process address space.
* @vaddr: the virtual address to insert the opcode.
*
* For mm @mm, store the breakpoint instruction at @vaddr.
* Return 0 (success) or a negative errno.
*/
int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
return uprobe_write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
/**
* set_orig_insn - Restore the original instruction.
* @mm: the probed process address space.
* @auprobe: arch specific probepoint information.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* @vaddr: the virtual address to insert the opcode.
*
* For mm @mm, restore the original opcode (opcode) at @vaddr.
* Return 0 (success) or a negative errno.
*/
int __weak
set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
return uprobe_write_opcode(auprobe, mm, vaddr,
*(uprobe_opcode_t *)&auprobe->insn);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static struct uprobe *get_uprobe(struct uprobe *uprobe)
{
uprobes: convert uprobe.ref to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable uprobe.ref is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the uprobe.ref it might make a difference in following places: - put_uprobe(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Link: http://lkml.kernel.org/r/1547637627-29526-1-git-send-email-elena.reshetova@intel.com Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-01-16 19:20:27 +08:00
refcount_inc(&uprobe->ref);
return uprobe;
}
static void put_uprobe(struct uprobe *uprobe)
{
uprobes: convert uprobe.ref to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable uprobe.ref is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the uprobe.ref it might make a difference in following places: - put_uprobe(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Link: http://lkml.kernel.org/r/1547637627-29526-1-git-send-email-elena.reshetova@intel.com Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-01-16 19:20:27 +08:00
if (refcount_dec_and_test(&uprobe->ref)) {
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
/*
* If application munmap(exec_vma) before uprobe_unregister()
* gets called, we don't get a chance to remove uprobe from
* delayed_uprobe_list from remove_breakpoint(). Do it here.
*/
mutex_lock(&delayed_uprobe_lock);
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
delayed_uprobe_remove(uprobe, NULL);
mutex_unlock(&delayed_uprobe_lock);
kfree(uprobe);
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
}
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
static int match_uprobe(struct uprobe *l, struct uprobe *r)
{
if (l->inode < r->inode)
return -1;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (l->inode > r->inode)
return 1;
if (l->offset < r->offset)
return -1;
if (l->offset > r->offset)
return 1;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return 0;
}
static struct uprobe *__find_uprobe(struct inode *inode, loff_t offset)
{
struct uprobe u = { .inode = inode, .offset = offset };
struct rb_node *n = uprobes_tree.rb_node;
struct uprobe *uprobe;
int match;
while (n) {
uprobe = rb_entry(n, struct uprobe, rb_node);
match = match_uprobe(&u, uprobe);
if (!match)
return get_uprobe(uprobe);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (match < 0)
n = n->rb_left;
else
n = n->rb_right;
}
return NULL;
}
/*
* Find a uprobe corresponding to a given inode:offset
* Acquires uprobes_treelock
*/
static struct uprobe *find_uprobe(struct inode *inode, loff_t offset)
{
struct uprobe *uprobe;
spin_lock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobe = __find_uprobe(inode, offset);
spin_unlock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return uprobe;
}
static struct uprobe *__insert_uprobe(struct uprobe *uprobe)
{
struct rb_node **p = &uprobes_tree.rb_node;
struct rb_node *parent = NULL;
struct uprobe *u;
int match;
while (*p) {
parent = *p;
u = rb_entry(parent, struct uprobe, rb_node);
match = match_uprobe(uprobe, u);
if (!match)
return get_uprobe(u);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (match < 0)
p = &parent->rb_left;
else
p = &parent->rb_right;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
u = NULL;
rb_link_node(&uprobe->rb_node, parent, p);
rb_insert_color(&uprobe->rb_node, &uprobes_tree);
/* get access + creation ref */
uprobes: convert uprobe.ref to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable uprobe.ref is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the uprobe.ref it might make a difference in following places: - put_uprobe(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Link: http://lkml.kernel.org/r/1547637627-29526-1-git-send-email-elena.reshetova@intel.com Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-01-16 19:20:27 +08:00
refcount_set(&uprobe->ref, 2);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return u;
}
/*
* Acquire uprobes_treelock.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* Matching uprobe already exists in rbtree;
* increment (access refcount) and return the matching uprobe.
*
* No matching uprobe; insert the uprobe in rb_tree;
* get a double refcount (access + creation) and return NULL.
*/
static struct uprobe *insert_uprobe(struct uprobe *uprobe)
{
struct uprobe *u;
spin_lock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
u = __insert_uprobe(uprobe);
spin_unlock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return u;
}
static void
ref_ctr_mismatch_warn(struct uprobe *cur_uprobe, struct uprobe *uprobe)
{
pr_warn("ref_ctr_offset mismatch. inode: 0x%lx offset: 0x%llx "
"ref_ctr_offset(old): 0x%llx ref_ctr_offset(new): 0x%llx\n",
uprobe->inode->i_ino, (unsigned long long) uprobe->offset,
(unsigned long long) cur_uprobe->ref_ctr_offset,
(unsigned long long) uprobe->ref_ctr_offset);
}
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
static struct uprobe *alloc_uprobe(struct inode *inode, loff_t offset,
loff_t ref_ctr_offset)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct uprobe *uprobe, *cur_uprobe;
uprobe = kzalloc(sizeof(struct uprobe), GFP_KERNEL);
if (!uprobe)
return NULL;
uprobe->inode = inode;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobe->offset = offset;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
uprobe->ref_ctr_offset = ref_ctr_offset;
init_rwsem(&uprobe->register_rwsem);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
init_rwsem(&uprobe->consumer_rwsem);
/* add to uprobes_tree, sorted on inode:offset */
cur_uprobe = insert_uprobe(uprobe);
/* a uprobe exists for this inode:offset combination */
if (cur_uprobe) {
if (cur_uprobe->ref_ctr_offset != uprobe->ref_ctr_offset) {
ref_ctr_mismatch_warn(cur_uprobe, uprobe);
put_uprobe(cur_uprobe);
kfree(uprobe);
return ERR_PTR(-EINVAL);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
kfree(uprobe);
uprobe = cur_uprobe;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return uprobe;
}
static void consumer_add(struct uprobe *uprobe, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
down_write(&uprobe->consumer_rwsem);
uc->next = uprobe->consumers;
uprobe->consumers = uc;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
up_write(&uprobe->consumer_rwsem);
}
/*
* For uprobe @uprobe, delete the consumer @uc.
* Return true if the @uc is deleted successfully
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* or return false.
*/
static bool consumer_del(struct uprobe *uprobe, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct uprobe_consumer **con;
bool ret = false;
down_write(&uprobe->consumer_rwsem);
for (con = &uprobe->consumers; *con; con = &(*con)->next) {
if (*con == uc) {
*con = uc->next;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
ret = true;
break;
}
}
up_write(&uprobe->consumer_rwsem);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return ret;
}
static int __copy_insn(struct address_space *mapping, struct file *filp,
void *insn, int nbytes, loff_t offset)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct page *page;
/*
* Ensure that the page that has the original instruction is populated
* and in page-cache. If ->readpage == NULL it must be shmem_mapping(),
* see uprobe_register().
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
if (mapping->a_ops->readpage)
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
page = read_mapping_page(mapping, offset >> PAGE_SHIFT, filp);
else
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (IS_ERR(page))
return PTR_ERR(page);
copy_from_page(page, offset, insn, nbytes);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return 0;
}
static int copy_insn(struct uprobe *uprobe, struct file *filp)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct address_space *mapping = uprobe->inode->i_mapping;
loff_t offs = uprobe->offset;
void *insn = &uprobe->arch.insn;
int size = sizeof(uprobe->arch.insn);
int len, err = -EIO;
/* Copy only available bytes, -EIO if nothing was read */
do {
if (offs >= i_size_read(uprobe->inode))
break;
len = min_t(int, size, PAGE_SIZE - (offs & ~PAGE_MASK));
err = __copy_insn(mapping, filp, insn, len, offs);
if (err)
break;
insn += len;
offs += len;
size -= len;
} while (size);
return err;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static int prepare_uprobe(struct uprobe *uprobe, struct file *file,
struct mm_struct *mm, unsigned long vaddr)
{
int ret = 0;
if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
return ret;
/* TODO: move this into _register, until then we abuse this sem. */
down_write(&uprobe->consumer_rwsem);
if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
goto out;
ret = copy_insn(uprobe, file);
if (ret)
goto out;
ret = -ENOTSUPP;
if (is_trap_insn((uprobe_opcode_t *)&uprobe->arch.insn))
goto out;
ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr);
if (ret)
goto out;
/* uprobe_write_opcode() assumes we don't cross page boundary */
BUG_ON((uprobe->offset & ~PAGE_MASK) +
UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
uprobes: Fix handle_swbp() vs. unregister() + register() race once more Commit: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb() memory barriers, to ensure that handle_swbp() uses fully-initialized uprobes only. However, the smp_rmb() is mis-placed: this barrier should be placed after handle_swbp() has tested for the flag, thus guaranteeing that (program-order) subsequent loads from the uprobe can see the initial stores performed by prepare_uprobe(). Move the smp_rmb() accordingly. Also amend the comments associated to the two memory barriers to indicate their actual locations. Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@kernel.org Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-23 00:10:31 +08:00
smp_wmb(); /* pairs with the smp_rmb() in handle_swbp() */
set_bit(UPROBE_COPY_INSN, &uprobe->flags);
out:
up_write(&uprobe->consumer_rwsem);
return ret;
}
static inline bool consumer_filter(struct uprobe_consumer *uc,
enum uprobe_filter_ctx ctx, struct mm_struct *mm)
{
return !uc->filter || uc->filter(uc, ctx, mm);
}
static bool filter_chain(struct uprobe *uprobe,
enum uprobe_filter_ctx ctx, struct mm_struct *mm)
{
struct uprobe_consumer *uc;
bool ret = false;
down_read(&uprobe->consumer_rwsem);
for (uc = uprobe->consumers; uc; uc = uc->next) {
ret = consumer_filter(uc, ctx, mm);
if (ret)
break;
}
up_read(&uprobe->consumer_rwsem);
return ret;
}
static int
install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
bool first_uprobe;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
int ret;
ret = prepare_uprobe(uprobe, vma->vm_file, mm, vaddr);
if (ret)
return ret;
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:46 +08:00
/*
* set MMF_HAS_UPROBES in advance for uprobe_pre_sstep_notifier(),
* the task can hit this breakpoint right after __replace_page().
*/
first_uprobe = !test_bit(MMF_HAS_UPROBES, &mm->flags);
if (first_uprobe)
set_bit(MMF_HAS_UPROBES, &mm->flags);
ret = set_swbp(&uprobe->arch, mm, vaddr);
if (!ret)
clear_bit(MMF_RECALC_UPROBES, &mm->flags);
else if (first_uprobe)
clear_bit(MMF_HAS_UPROBES, &mm->flags);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return ret;
}
static int
remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
set_bit(MMF_RECALC_UPROBES, &mm->flags);
return set_orig_insn(&uprobe->arch, mm, vaddr);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static inline bool uprobe_is_active(struct uprobe *uprobe)
{
return !RB_EMPTY_NODE(&uprobe->rb_node);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
/*
* There could be threads that have already hit the breakpoint. They
* will recheck the current insn and restart if find_uprobe() fails.
* See find_active_uprobe().
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
*/
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
static void delete_uprobe(struct uprobe *uprobe)
{
if (WARN_ON(!uprobe_is_active(uprobe)))
return;
spin_lock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
rb_erase(&uprobe->rb_node, &uprobes_tree);
spin_unlock(&uprobes_treelock);
RB_CLEAR_NODE(&uprobe->rb_node); /* for uprobe_is_active() */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
put_uprobe(uprobe);
}
struct map_info {
struct map_info *next;
struct mm_struct *mm;
unsigned long vaddr;
};
static inline struct map_info *free_map_info(struct map_info *info)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct map_info *next = info->next;
kfree(info);
return next;
}
static struct map_info *
build_map_info(struct address_space *mapping, loff_t offset, bool is_register)
{
unsigned long pgoff = offset >> PAGE_SHIFT;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
struct vm_area_struct *vma;
struct map_info *curr = NULL;
struct map_info *prev = NULL;
struct map_info *info;
int more = 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
again:
i_mmap_lock_read(mapping);
vma_interval_tree_foreach(vma, &mapping->i_mmap, pgoff, pgoff) {
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (!valid_vma(vma, is_register))
continue;
if (!prev && !more) {
/*
* Needs GFP_NOWAIT to avoid i_mmap_rwsem recursion through
* reclaim. This is optimistic, no harm done if it fails.
*/
prev = kmalloc(sizeof(struct map_info),
GFP_NOWAIT | __GFP_NOMEMALLOC | __GFP_NOWARN);
if (prev)
prev->next = NULL;
}
if (!prev) {
more++;
continue;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
if (!mmget_not_zero(vma->vm_mm))
continue;
info = prev;
prev = prev->next;
info->next = curr;
curr = info;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
info->mm = vma->vm_mm;
info->vaddr = offset_to_vaddr(vma, offset);
}
i_mmap_unlock_read(mapping);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (!more)
goto out;
prev = curr;
while (curr) {
mmput(curr->mm);
curr = curr->next;
}
do {
info = kmalloc(sizeof(struct map_info), GFP_KERNEL);
if (!info) {
curr = ERR_PTR(-ENOMEM);
goto out;
}
info->next = prev;
prev = info;
} while (--more);
goto again;
out:
while (prev)
prev = free_map_info(prev);
return curr;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static int
register_for_each_vma(struct uprobe *uprobe, struct uprobe_consumer *new)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
bool is_register = !!new;
struct map_info *info;
int err = 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
percpu_down_write(&dup_mmap_sem);
info = build_map_info(uprobe->inode->i_mapping,
uprobe->offset, is_register);
if (IS_ERR(info)) {
err = PTR_ERR(info);
goto out;
}
while (info) {
struct mm_struct *mm = info->mm;
struct vm_area_struct *vma;
if (err && is_register)
goto free;
down_write(&mm->mmap_sem);
vma = find_vma(mm, info->vaddr);
if (!vma || !valid_vma(vma, is_register) ||
file_inode(vma->vm_file) != uprobe->inode)
goto unlock;
if (vma->vm_start > info->vaddr ||
vaddr_to_offset(vma, info->vaddr) != uprobe->offset)
goto unlock;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (is_register) {
/* consult only the "caller", new consumer. */
if (consumer_filter(new,
UPROBE_FILTER_REGISTER, mm))
err = install_breakpoint(uprobe, mm, vma, info->vaddr);
} else if (test_bit(MMF_HAS_UPROBES, &mm->flags)) {
if (!filter_chain(uprobe,
UPROBE_FILTER_UNREGISTER, mm))
err |= remove_breakpoint(uprobe, mm, info->vaddr);
}
unlock:
up_write(&mm->mmap_sem);
free:
mmput(mm);
info = free_map_info(info);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
out:
percpu_up_write(&dup_mmap_sem);
return err;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static void
__uprobe_unregister(struct uprobe *uprobe, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
int err;
if (WARN_ON(!consumer_del(uprobe, uc)))
return;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
err = register_for_each_vma(uprobe, NULL);
/* TODO : cant unregister? schedule a worker thread */
if (!uprobe->consumers && !err)
delete_uprobe(uprobe);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
/*
Updates for v4.19: - Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockde and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3 c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU= =vgEr -----END PGP SIGNATURE----- Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockdep and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. * tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) tracing: Fix SPDX format headers to use C++ style comments tracing: Add SPDX License format tags to tracing files tracing: Add SPDX License format to bpf_trace.c blktrace: Add SPDX License format header s390/ftrace: Add -mfentry and -mnop-mcount support tracing: Add -mcount-nop option support tracing: Avoid calling cc-option -mrecord-mcount for every Makefile tracing: Handle CC_FLAGS_FTRACE more accurately Uprobe: Additional argument arch_uprobe to uprobe_write_opcode() Uprobes: Simplify uprobe_register() body tracepoints: Free early tracepoints after RCU is initialized uprobes: Use synchronize_rcu() not synchronize_sched() tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister() ftrace: Remove unused pointer ftrace_swapper_pid tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing/irqsoff: Handle preempt_count for different configs tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing: irqsoff: Account for additional preempt_disable trace: Use rcu_dereference_raw for hooks from trace-event subsystem tracing/kprobes: Fix within_notrace_func() to check only notrace functions ...
2018-08-21 09:32:00 +08:00
* uprobe_unregister - unregister an already registered probe.
* @inode: the file in which the probe has to be removed.
* @offset: offset from the start of the file.
* @uc: identify which probe if multiple probes are colocated.
*/
void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc)
{
struct uprobe *uprobe;
uprobe = find_uprobe(inode, offset);
if (WARN_ON(!uprobe))
return;
down_write(&uprobe->register_rwsem);
__uprobe_unregister(uprobe, uc);
up_write(&uprobe->register_rwsem);
put_uprobe(uprobe);
}
EXPORT_SYMBOL_GPL(uprobe_unregister);
/*
* __uprobe_register - register a probe
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* @inode: the file in which the probe has to be placed.
* @offset: offset from the start of the file.
* @uc: information on howto handle the probe..
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* Apart from the access refcount, __uprobe_register() takes a creation
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* refcount (thro alloc_uprobe) if and only if this @uprobe is getting
* inserted into the rbtree (i.e first consumer for a @inode:@offset
* tuple). Creation refcount stops uprobe_unregister from freeing the
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* @uprobe even before the register operation is complete. Creation
* refcount is released when the last @uc for the @uprobe
* unregisters. Caller of __uprobe_register() is required to keep @inode
* (and the containing mount) referenced.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* Return errno if it cannot successully install probes
* else return 0 (success)
*/
static int __uprobe_register(struct inode *inode, loff_t offset,
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
loff_t ref_ctr_offset, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct uprobe *uprobe;
int ret;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* Uprobe must have at least one set consumer */
if (!uc->handler && !uc->ret_handler)
return -EINVAL;
/* copy_insn() uses read_mapping_page() or shmem_read_mapping_page() */
if (!inode->i_mapping->a_ops->readpage && !shmem_mapping(inode->i_mapping))
return -EIO;
/* Racy, just to catch the obvious mistakes */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (offset > i_size_read(inode))
return -EINVAL;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
retry:
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
uprobe = alloc_uprobe(inode, offset, ref_ctr_offset);
if (!uprobe)
return -ENOMEM;
if (IS_ERR(uprobe))
return PTR_ERR(uprobe);
/*
* We can race with uprobe_unregister()->delete_uprobe().
* Check uprobe_is_active() and retry if it is false.
*/
down_write(&uprobe->register_rwsem);
ret = -EAGAIN;
if (likely(uprobe_is_active(uprobe))) {
consumer_add(uprobe, uc);
ret = register_for_each_vma(uprobe, uc);
if (ret)
__uprobe_unregister(uprobe, uc);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
up_write(&uprobe->register_rwsem);
put_uprobe(uprobe);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (unlikely(ret == -EAGAIN))
goto retry;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return ret;
}
int uprobe_register(struct inode *inode, loff_t offset,
struct uprobe_consumer *uc)
{
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
return __uprobe_register(inode, offset, 0, uc);
}
EXPORT_SYMBOL_GPL(uprobe_register);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
int uprobe_register_refctr(struct inode *inode, loff_t offset,
loff_t ref_ctr_offset, struct uprobe_consumer *uc)
{
return __uprobe_register(inode, offset, ref_ctr_offset, uc);
}
EXPORT_SYMBOL_GPL(uprobe_register_refctr);
/*
* uprobe_apply - unregister an already registered probe.
* @inode: the file in which the probe has to be removed.
* @offset: offset from the start of the file.
* @uc: consumer which wants to add more or remove some breakpoints
* @add: add or remove the breakpoints
*/
int uprobe_apply(struct inode *inode, loff_t offset,
struct uprobe_consumer *uc, bool add)
{
struct uprobe *uprobe;
struct uprobe_consumer *con;
int ret = -ENOENT;
uprobe = find_uprobe(inode, offset);
if (WARN_ON(!uprobe))
return ret;
down_write(&uprobe->register_rwsem);
for (con = uprobe->consumers; con && con != uc ; con = con->next)
;
if (con)
ret = register_for_each_vma(uprobe, add ? uc : NULL);
up_write(&uprobe->register_rwsem);
put_uprobe(uprobe);
return ret;
}
static int unapply_uprobe(struct uprobe *uprobe, struct mm_struct *mm)
{
struct vm_area_struct *vma;
int err = 0;
down_read(&mm->mmap_sem);
for (vma = mm->mmap; vma; vma = vma->vm_next) {
unsigned long vaddr;
loff_t offset;
if (!valid_vma(vma, false) ||
file_inode(vma->vm_file) != uprobe->inode)
continue;
offset = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
if (uprobe->offset < offset ||
uprobe->offset >= offset + vma->vm_end - vma->vm_start)
continue;
vaddr = offset_to_vaddr(vma, uprobe->offset);
err |= remove_breakpoint(uprobe, mm, vaddr);
}
up_read(&mm->mmap_sem);
return err;
}
static struct rb_node *
find_node_in_range(struct inode *inode, loff_t min, loff_t max)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct rb_node *n = uprobes_tree.rb_node;
while (n) {
struct uprobe *u = rb_entry(n, struct uprobe, rb_node);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (inode < u->inode) {
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
n = n->rb_left;
} else if (inode > u->inode) {
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
n = n->rb_right;
} else {
if (max < u->offset)
n = n->rb_left;
else if (min > u->offset)
n = n->rb_right;
else
break;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
return n;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
/*
* For a given range in vma, build a list of probes that need to be inserted.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
static void build_probe_list(struct inode *inode,
struct vm_area_struct *vma,
unsigned long start, unsigned long end,
struct list_head *head)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
loff_t min, max;
struct rb_node *n, *t;
struct uprobe *u;
INIT_LIST_HEAD(head);
min = vaddr_to_offset(vma, start);
max = min + (end - start) - 1;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
spin_lock(&uprobes_treelock);
n = find_node_in_range(inode, min, max);
if (n) {
for (t = n; t; t = rb_prev(t)) {
u = rb_entry(t, struct uprobe, rb_node);
if (u->inode != inode || u->offset < min)
break;
list_add(&u->pending_list, head);
get_uprobe(u);
}
for (t = n; (t = rb_next(t)); ) {
u = rb_entry(t, struct uprobe, rb_node);
if (u->inode != inode || u->offset > max)
break;
list_add(&u->pending_list, head);
get_uprobe(u);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
spin_unlock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
/* @vma contains reference counter, not the probed instruction. */
static int delayed_ref_ctr_inc(struct vm_area_struct *vma)
{
struct list_head *pos, *q;
struct delayed_uprobe *du;
unsigned long vaddr;
int ret = 0, err = 0;
mutex_lock(&delayed_uprobe_lock);
list_for_each_safe(pos, q, &delayed_uprobe_list) {
du = list_entry(pos, struct delayed_uprobe, list);
if (du->mm != vma->vm_mm ||
!valid_ref_ctr_vma(du->uprobe, vma))
continue;
vaddr = offset_to_vaddr(vma, du->uprobe->ref_ctr_offset);
ret = __update_ref_ctr(vma->vm_mm, vaddr, 1);
if (ret) {
update_ref_ctr_warn(du->uprobe, vma->vm_mm, 1);
if (!err)
err = ret;
}
delayed_uprobe_delete(du);
}
mutex_unlock(&delayed_uprobe_lock);
return err;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/*
* Called from mmap_region/vma_adjust with mm->mmap_sem acquired.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* Currently we ignore all errors and always return 0, the callers
* can't handle the failure anyway.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
int uprobe_mmap(struct vm_area_struct *vma)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct list_head tmp_list;
struct uprobe *uprobe, *u;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
struct inode *inode;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
if (no_uprobe_events())
return 0;
if (vma->vm_file &&
(vma->vm_flags & (VM_WRITE|VM_SHARED)) == VM_WRITE &&
test_bit(MMF_HAS_UPROBES, &vma->vm_mm->flags))
delayed_ref_ctr_inc(vma);
if (!valid_vma(vma, true))
return 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
inode = file_inode(vma->vm_file);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (!inode)
return 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
mutex_lock(uprobes_mmap_hash(inode));
build_probe_list(inode, vma, vma->vm_start, vma->vm_end, &tmp_list);
/*
* We can race with uprobe_unregister(), this uprobe can be already
* removed. But in this case filter_chain() must return false, all
* consumers have gone away.
*/
list_for_each_entry_safe(uprobe, u, &tmp_list, pending_list) {
if (!fatal_signal_pending(current) &&
filter_chain(uprobe, UPROBE_FILTER_MMAP, vma->vm_mm)) {
unsigned long vaddr = offset_to_vaddr(vma, uprobe->offset);
install_breakpoint(uprobe, vma->vm_mm, vma, vaddr);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
put_uprobe(uprobe);
}
mutex_unlock(uprobes_mmap_hash(inode));
return 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
static bool
vma_has_uprobes(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
loff_t min, max;
struct inode *inode;
struct rb_node *n;
inode = file_inode(vma->vm_file);
min = vaddr_to_offset(vma, start);
max = min + (end - start) - 1;
spin_lock(&uprobes_treelock);
n = find_node_in_range(inode, min, max);
spin_unlock(&uprobes_treelock);
return !!n;
}
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:46 +08:00
/*
* Called in context of a munmap of a vma.
*/
uprobes/core: Decrement uprobe count before the pages are unmapped Uprobes has a callback (uprobe_munmap()) in the unmap path to maintain the uprobes count. In the exit path this callback gets called in unlink_file_vma(). However by the time unlink_file_vma() is called, the pages would have been unmapped (in unmap_vmas()) and the task->rss_stat counts accounted (in zap_pte_range()). If the exiting process has probepoints, uprobe_munmap() checks if the breakpoint instruction was around before decrementing the probe count. This results in a file backed page being reread by uprobe_munmap() and hence it does not find the breakpoint. This patch fixes this problem by moving the callback to unmap_single_vma(). Since unmap_single_vma() may not unmap the complete vma, add start and end parameters to uprobe_munmap(). This bug became apparent courtesy of commit c3f0327f8e9d ("mm: add rss counters consistency check"). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120411103527.23245.9835.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-11 18:35:27 +08:00
void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end)
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:46 +08:00
{
if (no_uprobe_events() || !valid_vma(vma, false))
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:46 +08:00
return;
if (!atomic_read(&vma->vm_mm->mm_users)) /* called by mmput() ? */
return;
if (!test_bit(MMF_HAS_UPROBES, &vma->vm_mm->flags) ||
test_bit(MMF_RECALC_UPROBES, &vma->vm_mm->flags))
return;
if (vma_has_uprobes(vma, start, end))
set_bit(MMF_RECALC_UPROBES, &vma->vm_mm->flags);
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:46 +08:00
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
/* Slot allocation for XOL */
static int xol_add_vma(struct mm_struct *mm, struct xol_area *area)
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
{
struct vm_area_struct *vma;
int ret;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
if (down_write_killable(&mm->mmap_sem))
return -EINTR;
if (mm->uprobes_state.xol_area) {
ret = -EALREADY;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
goto fail;
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
if (!area->vaddr) {
/* Try to map as high as possible, this is only a hint. */
area->vaddr = get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE,
PAGE_SIZE, 0, 0);
if (area->vaddr & ~PAGE_MASK) {
ret = area->vaddr;
goto fail;
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
}
vma = _install_special_mapping(mm, area->vaddr, PAGE_SIZE,
VM_EXEC|VM_MAYEXEC|VM_DONTCOPY|VM_IO,
&area->xol_mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
goto fail;
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
ret = 0;
/* pairs with get_xol_area() */
smp_store_release(&mm->uprobes_state.xol_area, area); /* ^^^ */
fail:
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
up_write(&mm->mmap_sem);
return ret;
}
static struct xol_area *__create_xol_area(unsigned long vaddr)
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
{
struct mm_struct *mm = current->mm;
uprobe_opcode_t insn = UPROBE_SWBP_INSN;
struct xol_area *area;
area = kmalloc(sizeof(*area), GFP_KERNEL);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
if (unlikely(!area))
goto out;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
area->bitmap = kcalloc(BITS_TO_LONGS(UINSNS_PER_PAGE), sizeof(long),
GFP_KERNEL);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
if (!area->bitmap)
goto free_area;
area->xol_mapping.name = "[uprobes]";
area->xol_mapping.fault = NULL;
area->xol_mapping.pages = area->pages;
area->pages[0] = alloc_page(GFP_HIGHUSER);
if (!area->pages[0])
goto free_bitmap;
area->pages[1] = NULL;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
area->vaddr = vaddr;
init_waitqueue_head(&area->wq);
/* Reserve the 1st slot for get_trampoline_vaddr() */
set_bit(0, area->bitmap);
atomic_set(&area->slot_count, 1);
arch_uprobe_copy_ixol(area->pages[0], 0, &insn, UPROBE_SWBP_INSN_SIZE);
if (!xol_add_vma(mm, area))
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
return area;
__free_page(area->pages[0]);
free_bitmap:
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
kfree(area->bitmap);
free_area:
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
kfree(area);
out:
return NULL;
}
/*
* get_xol_area - Allocate process's xol_area if necessary.
* This area will be used for storing instructions for execution out of line.
*
* Returns the allocated area or NULL.
*/
static struct xol_area *get_xol_area(void)
{
struct mm_struct *mm = current->mm;
struct xol_area *area;
if (!mm->uprobes_state.xol_area)
__create_xol_area(0);
/* Pairs with xol_add_vma() smp_store_release() */
area = READ_ONCE(mm->uprobes_state.xol_area); /* ^^^ */
return area;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
}
/*
* uprobe_clear_state - Free the area allocated for slots.
*/
void uprobe_clear_state(struct mm_struct *mm)
{
struct xol_area *area = mm->uprobes_state.xol_area;
uprobes: Support SDT markers having reference count (semaphore) Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-20 12:42:47 +08:00
mutex_lock(&delayed_uprobe_lock);
delayed_uprobe_remove(NULL, mm);
mutex_unlock(&delayed_uprobe_lock);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
if (!area)
return;
put_page(area->pages[0]);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
kfree(area->bitmap);
kfree(area);
}
void uprobe_start_dup_mmap(void)
{
percpu_down_read(&dup_mmap_sem);
}
void uprobe_end_dup_mmap(void)
{
percpu_up_read(&dup_mmap_sem);
}
void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm)
{
if (test_bit(MMF_HAS_UPROBES, &oldmm->flags)) {
set_bit(MMF_HAS_UPROBES, &newmm->flags);
/* unconditionally, dup_mmap() skips VM_DONTCOPY vmas */
set_bit(MMF_RECALC_UPROBES, &newmm->flags);
}
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
/*
* - search for a free slot.
*/
static unsigned long xol_take_insn_slot(struct xol_area *area)
{
unsigned long slot_addr;
int slot_nr;
do {
slot_nr = find_first_zero_bit(area->bitmap, UINSNS_PER_PAGE);
if (slot_nr < UINSNS_PER_PAGE) {
if (!test_and_set_bit(slot_nr, area->bitmap))
break;
slot_nr = UINSNS_PER_PAGE;
continue;
}
wait_event(area->wq, (atomic_read(&area->slot_count) < UINSNS_PER_PAGE));
} while (slot_nr >= UINSNS_PER_PAGE);
slot_addr = area->vaddr + (slot_nr * UPROBE_XOL_SLOT_BYTES);
atomic_inc(&area->slot_count);
return slot_addr;
}
/*
* xol_get_insn_slot - allocate a slot for xol.
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
* Returns the allocated slot address or 0.
*/
static unsigned long xol_get_insn_slot(struct uprobe *uprobe)
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
{
struct xol_area *area;
unsigned long xol_vaddr;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
area = get_xol_area();
if (!area)
return 0;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
xol_vaddr = xol_take_insn_slot(area);
if (unlikely(!xol_vaddr))
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
return 0;
arch_uprobe_copy_ixol(area->pages[0], xol_vaddr,
2014-04-29 11:20:52 +08:00
&uprobe->arch.ixol, sizeof(uprobe->arch.ixol));
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
return xol_vaddr;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
}
/*
* xol_free_insn_slot - If slot was earlier allocated by
* @xol_get_insn_slot(), make the slot available for
* subsequent requests.
*/
static void xol_free_insn_slot(struct task_struct *tsk)
{
struct xol_area *area;
unsigned long vma_end;
unsigned long slot_addr;
if (!tsk->mm || !tsk->mm->uprobes_state.xol_area || !tsk->utask)
return;
slot_addr = tsk->utask->xol_vaddr;
if (unlikely(!slot_addr))
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
return;
area = tsk->mm->uprobes_state.xol_area;
vma_end = area->vaddr + PAGE_SIZE;
if (area->vaddr <= slot_addr && slot_addr < vma_end) {
unsigned long offset;
int slot_nr;
offset = slot_addr - area->vaddr;
slot_nr = offset / UPROBE_XOL_SLOT_BYTES;
if (slot_nr >= UINSNS_PER_PAGE)
return;
clear_bit(slot_nr, area->bitmap);
atomic_dec(&area->slot_count);
smp_mb__after_atomic(); /* pairs with prepare_to_wait() */
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
if (waitqueue_active(&area->wq))
wake_up(&area->wq);
tsk->utask->xol_vaddr = 0;
}
}
2014-04-29 11:20:52 +08:00
void __weak arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
void *src, unsigned long len)
{
/* Initialize the slot */
copy_to_page(page, vaddr, src, len);
/*
* We probably need flush_icache_user_range() but it needs vma.
* This should work on most of architectures by default. If
* architecture needs to do something different it can define
* its own version of the function.
*/
flush_dcache_page(page);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
/**
* uprobe_get_swbp_addr - compute address of swbp given post-swbp regs
* @regs: Reflects the saved state of the task after it has hit a breakpoint
* instruction.
* Return the address of the breakpoint instruction.
*/
unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs)
{
return instruction_pointer(regs) - UPROBE_SWBP_INSN_SIZE;
}
unsigned long uprobe_get_trap_addr(struct pt_regs *regs)
{
struct uprobe_task *utask = current->utask;
if (unlikely(utask && utask->active_uprobe))
return utask->vaddr;
return instruction_pointer(regs);
}
static struct return_instance *free_ret_instance(struct return_instance *ri)
{
struct return_instance *next = ri->next;
put_uprobe(ri->uprobe);
kfree(ri);
return next;
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
/*
* Called with no locks held.
* Called in context of an exiting or an exec-ing thread.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
*/
void uprobe_free_utask(struct task_struct *t)
{
struct uprobe_task *utask = t->utask;
struct return_instance *ri;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
if (!utask)
return;
if (utask->active_uprobe)
put_uprobe(utask->active_uprobe);
ri = utask->return_instances;
while (ri)
ri = free_ret_instance(ri);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
xol_free_insn_slot(t);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
kfree(utask);
t->utask = NULL;
}
/*
* Allocate a uprobe_task object for the task if if necessary.
* Called when the thread hits a breakpoint.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
*
* Returns:
* - pointer to new uprobe_task on success
* - NULL otherwise
*/
static struct uprobe_task *get_utask(void)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
{
if (!current->utask)
current->utask = kzalloc(sizeof(struct uprobe_task), GFP_KERNEL);
return current->utask;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
static int dup_utask(struct task_struct *t, struct uprobe_task *o_utask)
{
struct uprobe_task *n_utask;
struct return_instance **p, *o, *n;
n_utask = kzalloc(sizeof(struct uprobe_task), GFP_KERNEL);
if (!n_utask)
return -ENOMEM;
t->utask = n_utask;
p = &n_utask->return_instances;
for (o = o_utask->return_instances; o; o = o->next) {
n = kmalloc(sizeof(struct return_instance), GFP_KERNEL);
if (!n)
return -ENOMEM;
*n = *o;
get_uprobe(n->uprobe);
n->next = NULL;
*p = n;
p = &n->next;
n_utask->depth++;
}
return 0;
}
static void uprobe_warn(struct task_struct *t, const char *msg)
{
pr_warn("uprobe: %s:%d failed to %s\n",
current->comm, current->pid, msg);
}
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-14 03:18:44 +08:00
static void dup_xol_work(struct callback_head *work)
{
if (current->flags & PF_EXITING)
return;
if (!__create_xol_area(current->utask->dup_xol_addr) &&
!fatal_signal_pending(current))
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-14 03:18:44 +08:00
uprobe_warn(current, "dup xol area");
}
/*
* Called in context of a new clone/fork from copy_process.
*/
void uprobe_copy_process(struct task_struct *t, unsigned long flags)
{
struct uprobe_task *utask = current->utask;
struct mm_struct *mm = current->mm;
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-14 03:18:44 +08:00
struct xol_area *area;
t->utask = NULL;
if (!utask || !utask->return_instances)
return;
if (mm == t->mm && !(flags & CLONE_VFORK))
return;
if (dup_utask(t, utask))
return uprobe_warn(t, "dup ret instances");
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-14 03:18:44 +08:00
/* The task can fork() after dup_xol_work() fails */
area = mm->uprobes_state.xol_area;
if (!area)
return uprobe_warn(t, "dup xol area");
if (mm == t->mm)
return;
uprobes: Add uprobe_task->dup_xol_work/dup_xol_addr uprobe_task->vaddr is a bit strange. The generic code uses it only to pass the additional argument to arch_uprobe_pre_xol(), and since it is always equal to instruction_pointer() this looks even more strange. And both utask->vaddr and and utask->autask have the same scope, they only have the meaning when the task executes the probed insn out-of-line, so it is safe to reuse both in UTASK_RUNNING state. This all means that logically ->vaddr belongs to arch_uprobe_task and we should probably move it there, arch_uprobe_pre_xol() can record instruction_pointer() itself. OTOH, it is also used by uprobe_copy_process() and dup_xol_work() for another purpose, this doesn't look clean and doesn't allow to move this member into arch_uprobe_task. This patch adds the union with 2 anonymous structs into uprobe_task. The first struct is autask + vaddr, this way we "almost" move vaddr into autask. The second struct has 2 new members for uprobe_copy_process() paths: ->dup_xol_addr which can be used instead ->vaddr, and ->dup_xol_work which can be used to avoid kmalloc() and simplify the code. Note that this union will likely have another member(s), we need something like "private_data_for_handlers" so that the tracing handlers could use it to communicate with call_fetch() methods. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-11-09 01:52:21 +08:00
t->utask->dup_xol_addr = area->vaddr;
init_task_work(&t->utask->dup_xol_work, dup_xol_work);
task_work_add(t, &t->utask->dup_xol_work, true);
}
/*
* Current area->vaddr notion assume the trampoline address is always
* equal area->vaddr.
*
* Returns -1 in case the xol_area is not allocated.
*/
static unsigned long get_trampoline_vaddr(void)
{
struct xol_area *area;
unsigned long trampoline_vaddr = -1;
/* Pairs with xol_add_vma() smp_store_release() */
area = READ_ONCE(current->mm->uprobes_state.xol_area); /* ^^^ */
if (area)
trampoline_vaddr = area->vaddr;
return trampoline_vaddr;
}
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:28 +08:00
static void cleanup_return_instances(struct uprobe_task *utask, bool chained,
struct pt_regs *regs)
{
struct return_instance *ri = utask->return_instances;
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:28 +08:00
enum rp_check ctx = chained ? RP_CHECK_CHAIN_CALL : RP_CHECK_CALL;
while (ri && !arch_uretprobe_is_alive(ri, ctx, regs)) {
ri = free_ret_instance(ri);
utask->depth--;
}
utask->return_instances = ri;
}
static void prepare_uretprobe(struct uprobe *uprobe, struct pt_regs *regs)
{
struct return_instance *ri;
struct uprobe_task *utask;
unsigned long orig_ret_vaddr, trampoline_vaddr;
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:28 +08:00
bool chained;
if (!get_xol_area())
return;
utask = get_utask();
if (!utask)
return;
if (utask->depth >= MAX_URETPROBE_DEPTH) {
printk_ratelimited(KERN_INFO "uprobe: omit uretprobe due to"
" nestedness limit pid/tgid=%d/%d\n",
current->pid, current->tgid);
return;
}
ri = kmalloc(sizeof(struct return_instance), GFP_KERNEL);
if (!ri)
return;
trampoline_vaddr = get_trampoline_vaddr();
orig_ret_vaddr = arch_uretprobe_hijack_return_addr(trampoline_vaddr, regs);
if (orig_ret_vaddr == -1)
goto fail;
/* drop the entries invalidated by longjmp() */
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:28 +08:00
chained = (orig_ret_vaddr == trampoline_vaddr);
cleanup_return_instances(utask, chained, regs);
/*
* We don't want to keep trampoline address in stack, rather keep the
* original return address of first caller thru all the consequent
* instances. This also makes breakpoint unwrapping easier.
*/
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:28 +08:00
if (chained) {
if (!utask->return_instances) {
/*
* This situation is not possible. Likely we have an
* attack from user-space.
*/
uprobe_warn(current, "handle tail call");
goto fail;
}
orig_ret_vaddr = utask->return_instances->orig_ret_vaddr;
}
ri->uprobe = get_uprobe(uprobe);
ri->func = instruction_pointer(regs);
ri->stack = user_stack_pointer(regs);
ri->orig_ret_vaddr = orig_ret_vaddr;
ri->chained = chained;
utask->depth++;
ri->next = utask->return_instances;
utask->return_instances = ri;
return;
fail:
kfree(ri);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
/* Prepare to single-step probed instruction out of line. */
static int
pre_ssout(struct uprobe *uprobe, struct pt_regs *regs, unsigned long bp_vaddr)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
{
struct uprobe_task *utask;
unsigned long xol_vaddr;
int err;
utask = get_utask();
if (!utask)
return -ENOMEM;
xol_vaddr = xol_get_insn_slot(uprobe);
if (!xol_vaddr)
return -ENOMEM;
utask->xol_vaddr = xol_vaddr;
utask->vaddr = bp_vaddr;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
err = arch_uprobe_pre_xol(&uprobe->arch, regs);
if (unlikely(err)) {
xol_free_insn_slot(current);
return err;
}
utask->active_uprobe = uprobe;
utask->state = UTASK_SSTEP;
return 0;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
/*
* If we are singlestepping, then ensure this thread is not connected to
* non-fatal signals until completion of singlestep. When xol insn itself
* triggers the signal, restart the original insn even if the task is
* already SIGKILL'ed (since coredump should report the correct ip). This
* is even more important if the task has a handler for SIGSEGV/etc, The
* _same_ instruction should be repeated again after return from the signal
* handler, and SSTEP can never finish in this case.
*/
bool uprobe_deny_signal(void)
{
struct task_struct *t = current;
struct uprobe_task *utask = t->utask;
if (likely(!utask || !utask->active_uprobe))
return false;
WARN_ON_ONCE(utask->state != UTASK_SSTEP);
if (signal_pending(t)) {
spin_lock_irq(&t->sighand->siglock);
clear_tsk_thread_flag(t, TIF_SIGPENDING);
spin_unlock_irq(&t->sighand->siglock);
if (__fatal_signal_pending(t) || arch_uprobe_xol_was_trapped(t)) {
utask->state = UTASK_SSTEP_TRAPPED;
set_tsk_thread_flag(t, TIF_UPROBE);
}
}
return true;
}
static void mmf_recalc_uprobes(struct mm_struct *mm)
{
struct vm_area_struct *vma;
for (vma = mm->mmap; vma; vma = vma->vm_next) {
if (!valid_vma(vma, false))
continue;
/*
* This is not strictly accurate, we can race with
* uprobe_unregister() and see the already removed
* uprobe if delete_uprobe() was not yet called.
* Or this uprobe can be filtered out.
*/
if (vma_has_uprobes(vma, vma->vm_start, vma->vm_end))
return;
}
clear_bit(MMF_HAS_UPROBES, &mm->flags);
}
static int is_trap_at_addr(struct mm_struct *mm, unsigned long vaddr)
{
struct page *page;
uprobe_opcode_t opcode;
int result;
pagefault_disable();
result = __get_user(opcode, (uprobe_opcode_t __user *)vaddr);
pagefault_enable();
if (likely(result == 0))
goto out;
mm/gup: Introduce get_user_pages_remote() For protection keys, we need to understand whether protections should be enforced in software or not. In general, we enforce protections when working on our own task, but not when on others. We call these "current" and "remote" operations. This patch introduces a new get_user_pages() variant: get_user_pages_remote() Which is a replacement for when get_user_pages() is called on non-current tsk/mm. We also introduce a new gup flag: FOLL_REMOTE which can be used for the "__" gup variants to get this new behavior. The uprobes is_trap_at_addr() location holds mmap_sem and calls get_user_pages(current->mm) on an instruction address. This makes it a pretty unique gup caller. Being an instruction access and also really originating from the kernel (vs. the app), I opted to consider this a 'remote' access where protection keys will not be enforced. Without protection keys, this patch should not change any behavior. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210154.3F0E51EA@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:01:54 +08:00
/*
* The NULL 'tsk' here ensures that any faults that occur here
* will not be accounted to the task. 'mm' *is* current->mm,
* but we treat this as a 'remote' access since it is
* essentially a kernel access to the memory.
*/
result = get_user_pages_remote(NULL, mm, vaddr, 1, FOLL_FORCE, &page,
mm: add locked parameter to get_user_pages_remote() Patch series "mm: unexport __get_user_pages_unlocked()". This patch series continues the cleanup of get_user_pages*() functions taking advantage of the fact we can now pass gup_flags as we please. It firstly adds an additional 'locked' parameter to get_user_pages_remote() to allow for its callers to utilise VM_FAULT_RETRY functionality. This is necessary as the invocation of __get_user_pages_unlocked() in process_vm_rw_single_vec() makes use of this and no other existing higher level function would allow it to do so. Secondly existing callers of __get_user_pages_unlocked() are replaced with the appropriate higher-level replacement - get_user_pages_unlocked() if the current task and memory descriptor are referenced, or get_user_pages_remote() if other task/memory descriptors are referenced (having acquiring mmap_sem.) This patch (of 2): Add a int *locked parameter to get_user_pages_remote() to allow VM_FAULT_RETRY faulting behaviour similar to get_user_pages_[un]locked(). Taking into account the previous adjustments to get_user_pages*() functions allowing for the passing of gup_flags, we are now in a position where __get_user_pages_unlocked() need only be exported for his ability to allow VM_FAULT_RETRY behaviour, this adjustment allows us to subsequently unexport __get_user_pages_unlocked() as well as allowing for future flexibility in the use of get_user_pages_remote(). [sfr@canb.auug.org.au: merge fix for get_user_pages_remote API change] Link: http://lkml.kernel.org/r/20161122210511.024ec341@canb.auug.org.au Link: http://lkml.kernel.org/r/20161027095141.2569-2-lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15 07:06:52 +08:00
NULL, NULL);
if (result < 0)
return result;
copy_from_page(page, vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
put_page(page);
out:
/* This needs to return true for any variant of the trap insn */
return is_trap_insn(&opcode);
}
uprobes: Teach find_active_uprobe() to provide the "is_swbp" info A separate patch to simplify the review, and for the documentation. The patch adds another "int *is_swbp" argument to find_active_uprobe(), so far its only caller doesn't use this info. With this patch find_active_uprobe() additionally does: - if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT - otherwise, if valid_vma() + find_uprobe() fails, it holds the result of is_swbp_at_addr(), can be negative too. The latter is only possible if we raced with another thread which did munmap/etc after we hit this bp. IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller can look at is_swbp to figure out whether the current insn is bp or not, or detect the race with another thread if it is negative. Note: I think that performance-wise this change is fine. This adds is_swbp_at_addr(), but only if we raced with uprobe_unregister() or if we hit the "normal" int3 but this mm has uprobes as well. And even in this case the slow read_opcode() path is very unlikely, this insn recently triggered do_int3(), __copy_from_user_inatomic() shouldn't fail in the likely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-30 03:29:14 +08:00
static struct uprobe *find_active_uprobe(unsigned long bp_vaddr, int *is_swbp)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
{
struct mm_struct *mm = current->mm;
struct uprobe *uprobe = NULL;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
struct vm_area_struct *vma;
down_read(&mm->mmap_sem);
vma = find_vma(mm, bp_vaddr);
if (vma && vma->vm_start <= bp_vaddr) {
if (valid_vma(vma, false)) {
struct inode *inode = file_inode(vma->vm_file);
loff_t offset = vaddr_to_offset(vma, bp_vaddr);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
uprobe = find_uprobe(inode, offset);
}
uprobes: Teach find_active_uprobe() to provide the "is_swbp" info A separate patch to simplify the review, and for the documentation. The patch adds another "int *is_swbp" argument to find_active_uprobe(), so far its only caller doesn't use this info. With this patch find_active_uprobe() additionally does: - if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT - otherwise, if valid_vma() + find_uprobe() fails, it holds the result of is_swbp_at_addr(), can be negative too. The latter is only possible if we raced with another thread which did munmap/etc after we hit this bp. IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller can look at is_swbp to figure out whether the current insn is bp or not, or detect the race with another thread if it is negative. Note: I think that performance-wise this change is fine. This adds is_swbp_at_addr(), but only if we raced with uprobe_unregister() or if we hit the "normal" int3 but this mm has uprobes as well. And even in this case the slow read_opcode() path is very unlikely, this insn recently triggered do_int3(), __copy_from_user_inatomic() shouldn't fail in the likely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-30 03:29:14 +08:00
if (!uprobe)
*is_swbp = is_trap_at_addr(mm, bp_vaddr);
uprobes: Teach find_active_uprobe() to provide the "is_swbp" info A separate patch to simplify the review, and for the documentation. The patch adds another "int *is_swbp" argument to find_active_uprobe(), so far its only caller doesn't use this info. With this patch find_active_uprobe() additionally does: - if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT - otherwise, if valid_vma() + find_uprobe() fails, it holds the result of is_swbp_at_addr(), can be negative too. The latter is only possible if we raced with another thread which did munmap/etc after we hit this bp. IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller can look at is_swbp to figure out whether the current insn is bp or not, or detect the race with another thread if it is negative. Note: I think that performance-wise this change is fine. This adds is_swbp_at_addr(), but only if we raced with uprobe_unregister() or if we hit the "normal" int3 but this mm has uprobes as well. And even in this case the slow read_opcode() path is very unlikely, this insn recently triggered do_int3(), __copy_from_user_inatomic() shouldn't fail in the likely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-30 03:29:14 +08:00
} else {
*is_swbp = -EFAULT;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
if (!uprobe && test_and_clear_bit(MMF_RECALC_UPROBES, &mm->flags))
mmf_recalc_uprobes(mm);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
up_read(&mm->mmap_sem);
return uprobe;
}
static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs)
{
struct uprobe_consumer *uc;
int remove = UPROBE_HANDLER_REMOVE;
bool need_prep = false; /* prepare return uprobe, when needed */
down_read(&uprobe->register_rwsem);
for (uc = uprobe->consumers; uc; uc = uc->next) {
int rc = 0;
if (uc->handler) {
rc = uc->handler(uc, regs);
WARN(rc & ~UPROBE_HANDLER_MASK,
2019-03-26 03:32:28 +08:00
"bad rc=0x%x from %ps()\n", rc, uc->handler);
}
if (uc->ret_handler)
need_prep = true;
remove &= rc;
}
if (need_prep && !remove)
prepare_uretprobe(uprobe, regs); /* put bp at return */
if (remove && uprobe->consumers) {
WARN_ON(!uprobe_is_active(uprobe));
unapply_uprobe(uprobe, current->mm);
}
up_read(&uprobe->register_rwsem);
}
static void
handle_uretprobe_chain(struct return_instance *ri, struct pt_regs *regs)
{
struct uprobe *uprobe = ri->uprobe;
struct uprobe_consumer *uc;
down_read(&uprobe->register_rwsem);
for (uc = uprobe->consumers; uc; uc = uc->next) {
if (uc->ret_handler)
uc->ret_handler(uc, ri->func, regs);
}
up_read(&uprobe->register_rwsem);
}
static struct return_instance *find_next_ret_chain(struct return_instance *ri)
{
bool chained;
do {
chained = ri->chained;
ri = ri->next; /* can't be NULL if chained */
} while (chained);
return ri;
}
static void handle_trampoline(struct pt_regs *regs)
{
struct uprobe_task *utask;
struct return_instance *ri, *next;
uprobes: Change handle_trampoline() to flush the frames invalidated by longjmp() Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; void func_2(void) { longjmp(jmp, 1); } void func_1(void) { if (setjmp(jmp)) return; func_2(); printf("ERR!! I am running on the caller's stack\n"); } int main(void) { func_1(); return 0; } fails if you probe func_1() and func_2() because handle_trampoline() assumes that the probed function should must return and hit the bp installed be prepare_uretprobe(). But in this case func_2() does not return, so when func_1() returns the kernel uses the no longer valid return_instance of func_2(). Change handle_trampoline() to unwind ->return_instances until we know that the next chain is alive or NULL, this ensures that the current chain is the last we need to report and free. Alternatively, every return_instance could use unique trampoline_vaddr, in this case we could use it as a key. And this could solve the problem with sigaltstack() automatically. But this approach needs more changes, and it puts the "hard" limit on MAX_URETPROBE_DEPTH. Plus it can not solve another problem partially fixed by the next patch. Note: this change has no effect on !x86, the arch-agnostic version of arch_uretprobe_is_alive() just returns "true". TODO: as documented by the previous change, arch_uretprobe_is_alive() can be fooled by sigaltstack/etc. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134021.GA4773@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:21 +08:00
bool valid;
utask = current->utask;
if (!utask)
goto sigill;
ri = utask->return_instances;
if (!ri)
goto sigill;
do {
uprobes: Change handle_trampoline() to flush the frames invalidated by longjmp() Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; void func_2(void) { longjmp(jmp, 1); } void func_1(void) { if (setjmp(jmp)) return; func_2(); printf("ERR!! I am running on the caller's stack\n"); } int main(void) { func_1(); return 0; } fails if you probe func_1() and func_2() because handle_trampoline() assumes that the probed function should must return and hit the bp installed be prepare_uretprobe(). But in this case func_2() does not return, so when func_1() returns the kernel uses the no longer valid return_instance of func_2(). Change handle_trampoline() to unwind ->return_instances until we know that the next chain is alive or NULL, this ensures that the current chain is the last we need to report and free. Alternatively, every return_instance could use unique trampoline_vaddr, in this case we could use it as a key. And this could solve the problem with sigaltstack() automatically. But this approach needs more changes, and it puts the "hard" limit on MAX_URETPROBE_DEPTH. Plus it can not solve another problem partially fixed by the next patch. Note: this change has no effect on !x86, the arch-agnostic version of arch_uretprobe_is_alive() just returns "true". TODO: as documented by the previous change, arch_uretprobe_is_alive() can be fooled by sigaltstack/etc. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134021.GA4773@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:21 +08:00
/*
* We should throw out the frames invalidated by longjmp().
* If this chain is valid, then the next one should be alive
* or NULL; the latter case means that nobody but ri->func
* could hit this trampoline on return. TODO: sigaltstack().
*/
next = find_next_ret_chain(ri);
valid = !next || arch_uretprobe_is_alive(next, RP_CHECK_RET, regs);
uprobes: Change handle_trampoline() to flush the frames invalidated by longjmp() Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; void func_2(void) { longjmp(jmp, 1); } void func_1(void) { if (setjmp(jmp)) return; func_2(); printf("ERR!! I am running on the caller's stack\n"); } int main(void) { func_1(); return 0; } fails if you probe func_1() and func_2() because handle_trampoline() assumes that the probed function should must return and hit the bp installed be prepare_uretprobe(). But in this case func_2() does not return, so when func_1() returns the kernel uses the no longer valid return_instance of func_2(). Change handle_trampoline() to unwind ->return_instances until we know that the next chain is alive or NULL, this ensures that the current chain is the last we need to report and free. Alternatively, every return_instance could use unique trampoline_vaddr, in this case we could use it as a key. And this could solve the problem with sigaltstack() automatically. But this approach needs more changes, and it puts the "hard" limit on MAX_URETPROBE_DEPTH. Plus it can not solve another problem partially fixed by the next patch. Note: this change has no effect on !x86, the arch-agnostic version of arch_uretprobe_is_alive() just returns "true". TODO: as documented by the previous change, arch_uretprobe_is_alive() can be fooled by sigaltstack/etc. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134021.GA4773@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:21 +08:00
instruction_pointer_set(regs, ri->orig_ret_vaddr);
do {
if (valid)
handle_uretprobe_chain(ri, regs);
ri = free_ret_instance(ri);
utask->depth--;
} while (ri != next);
} while (!valid);
utask->return_instances = ri;
return;
sigill:
uprobe_warn(current, "handle uretprobe, sending SIGILL.");
force_sig(SIGILL);
}
bool __weak arch_uprobe_ignore(struct arch_uprobe *aup, struct pt_regs *regs)
{
return false;
}
bool __weak arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
struct pt_regs *regs)
{
return true;
}
/*
* Run handler and ask thread to singlestep.
* Ensure all non-fatal signals cannot interrupt thread while it singlesteps.
*/
static void handle_swbp(struct pt_regs *regs)
{
struct uprobe *uprobe;
unsigned long bp_vaddr;
int uninitialized_var(is_swbp);
bp_vaddr = uprobe_get_swbp_addr(regs);
if (bp_vaddr == get_trampoline_vaddr())
return handle_trampoline(regs);
uprobe = find_active_uprobe(bp_vaddr, &is_swbp);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
if (!uprobe) {
if (is_swbp > 0) {
/* No matching uprobe; signal SIGTRAP. */
send_sig(SIGTRAP, current, 0);
} else {
/*
* Either we raced with uprobe_unregister() or we can't
* access this memory. The latter is only possible if
* another thread plays with our ->mm. In both cases
* we can simply restart. If this vma was unmapped we
* can pretend this insn was not executed yet and get
* the (correct) SIGSEGV after restart.
*/
instruction_pointer_set(regs, bp_vaddr);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
return;
}
/* change it in advance for ->handler() and restart */
instruction_pointer_set(regs, bp_vaddr);
/*
* TODO: move copy_insn/etc into _register and remove this hack.
* After we hit the bp, _unregister + _register can install the
* new and not-yet-analyzed uprobe at the same address, restart.
*/
if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags)))
goto out;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
uprobes: Fix handle_swbp() vs. unregister() + register() race once more Commit: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb() memory barriers, to ensure that handle_swbp() uses fully-initialized uprobes only. However, the smp_rmb() is mis-placed: this barrier should be placed after handle_swbp() has tested for the flag, thus guaranteeing that (program-order) subsequent loads from the uprobe can see the initial stores performed by prepare_uprobe(). Move the smp_rmb() accordingly. Also amend the comments associated to the two memory barriers to indicate their actual locations. Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@kernel.org Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-23 00:10:31 +08:00
/*
* Pairs with the smp_wmb() in prepare_uprobe().
*
* Guarantees that if we see the UPROBE_COPY_INSN bit set, then
* we must also see the stores to &uprobe->arch performed by the
* prepare_uprobe() call.
*/
smp_rmb();
/* Tracing handlers use ->utask to communicate with fetch methods */
if (!get_utask())
goto out;
if (arch_uprobe_ignore(&uprobe->arch, regs))
goto out;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
handler_chain(uprobe, regs);
uprobes: Kill UPROBE_SKIP_SSTEP and can_skip_sstep() UPROBE_COPY_INSN, UPROBE_SKIP_SSTEP, and uprobe->flags must die. This patch kills UPROBE_SKIP_SSTEP. I never understood why it was added; not only it doesn't help, it harms. It can only help to avoid arch_uprobe_skip_sstep() if it was already called before and failed. But this is ugly, if we want to know whether we can emulate this instruction or not we should do this analysis in arch_uprobe_analyze_insn(), not when we hit this probe for the first time. And in fact this logic is simply wrong. arch_uprobe_skip_sstep() can fail or not depending on the task/register state, if this insn can be emulated but, say, put_user() fails we need to xol it this time, but this doesn't mean we shouldn't try to emulate it when this or another thread hits this bp next time. And this is the actual reason for this change. We need to emulate the "call" insn, but push(return-address) can obviously fail. Per-arch notes: x86: __skip_sstep() can only emulate "rep;nop". With this change it will be called every time and most probably for no reason. This will be fixed by the next changes. We need to change this suboptimal code anyway. arm: Should not be affected. It has its own "bool simulate" flag checked in arch_uprobe_skip_sstep(). ppc: Looks like, it can emulate almost everything. Does it actually need to record the fact that emulate_step() failed? Hopefully not. But if yes, it can add the ppc- specific flag into arch_uprobe. TODO: rename arch_uprobe_skip_sstep() to arch_uprobe_emulate_insn(), Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: David A. Long <dave.long@linaro.org> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 00:56:22 +08:00
if (arch_uprobe_skip_sstep(&uprobe->arch, regs))
goto out;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
if (!pre_ssout(uprobe, regs, bp_vaddr))
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
return;
uprobes: Kill UPROBE_SKIP_SSTEP and can_skip_sstep() UPROBE_COPY_INSN, UPROBE_SKIP_SSTEP, and uprobe->flags must die. This patch kills UPROBE_SKIP_SSTEP. I never understood why it was added; not only it doesn't help, it harms. It can only help to avoid arch_uprobe_skip_sstep() if it was already called before and failed. But this is ugly, if we want to know whether we can emulate this instruction or not we should do this analysis in arch_uprobe_analyze_insn(), not when we hit this probe for the first time. And in fact this logic is simply wrong. arch_uprobe_skip_sstep() can fail or not depending on the task/register state, if this insn can be emulated but, say, put_user() fails we need to xol it this time, but this doesn't mean we shouldn't try to emulate it when this or another thread hits this bp next time. And this is the actual reason for this change. We need to emulate the "call" insn, but push(return-address) can obviously fail. Per-arch notes: x86: __skip_sstep() can only emulate "rep;nop". With this change it will be called every time and most probably for no reason. This will be fixed by the next changes. We need to change this suboptimal code anyway. arm: Should not be affected. It has its own "bool simulate" flag checked in arch_uprobe_skip_sstep(). ppc: Looks like, it can emulate almost everything. Does it actually need to record the fact that emulate_step() failed? Hopefully not. But if yes, it can add the ppc- specific flag into arch_uprobe. TODO: rename arch_uprobe_skip_sstep() to arch_uprobe_emulate_insn(), Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: David A. Long <dave.long@linaro.org> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 00:56:22 +08:00
/* arch_uprobe_skip_sstep() succeeded, or restart if can't singlestep */
out:
put_uprobe(uprobe);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
/*
* Perform required fix-ups and disable singlestep.
* Allow pending signals to take effect.
*/
static void handle_singlestep(struct uprobe_task *utask, struct pt_regs *regs)
{
struct uprobe *uprobe;
int err = 0;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
uprobe = utask->active_uprobe;
if (utask->state == UTASK_SSTEP_ACK)
err = arch_uprobe_post_xol(&uprobe->arch, regs);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
else if (utask->state == UTASK_SSTEP_TRAPPED)
arch_uprobe_abort_xol(&uprobe->arch, regs);
else
WARN_ON_ONCE(1);
put_uprobe(uprobe);
utask->active_uprobe = NULL;
utask->state = UTASK_RUNNING;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-31 02:26:31 +08:00
xol_free_insn_slot(current);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
spin_lock_irq(&current->sighand->siglock);
recalc_sigpending(); /* see uprobe_deny_signal() */
spin_unlock_irq(&current->sighand->siglock);
if (unlikely(err)) {
uprobe_warn(current, "execute the probed insn, sending SIGILL.");
force_sig(SIGILL);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
/*
* On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag and
* allows the thread to return from interrupt. After that handle_swbp()
* sets utask->active_uprobe.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
*
* On singlestep exception, singlestep notifier sets the TIF_UPROBE flag
* and allows the thread to return from interrupt.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
*
* While returning to userspace, thread notices the TIF_UPROBE flag and calls
* uprobe_notify_resume().
*/
void uprobe_notify_resume(struct pt_regs *regs)
{
struct uprobe_task *utask;
clear_thread_flag(TIF_UPROBE);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
utask = current->utask;
if (utask && utask->active_uprobe)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
handle_singlestep(utask, regs);
else
handle_swbp(regs);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
/*
* uprobe_pre_sstep_notifier gets called from interrupt context as part of
* notifier mechanism. Set TIF_UPROBE flag and indicate breakpoint hit.
*/
int uprobe_pre_sstep_notifier(struct pt_regs *regs)
{
if (!current->mm)
return 0;
if (!test_bit(MMF_HAS_UPROBES, &current->mm->flags) &&
(!current->utask || !current->utask->return_instances))
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
return 0;
set_thread_flag(TIF_UPROBE);
return 1;
}
/*
* uprobe_post_sstep_notifier gets called in interrupt context as part of notifier
* mechanism. Set TIF_UPROBE flag and indicate completion of singlestep.
*/
int uprobe_post_sstep_notifier(struct pt_regs *regs)
{
struct uprobe_task *utask = current->utask;
if (!current->mm || !utask || !utask->active_uprobe)
/* task is currently not uprobed */
return 0;
utask->state = UTASK_SSTEP_ACK;
set_thread_flag(TIF_UPROBE);
return 1;
}
static struct notifier_block uprobe_exception_nb = {
.notifier_call = arch_uprobe_exception_notify,
.priority = INT_MAX-1, /* notified after kprobes, kgdb */
};
uprobes: Initialize uprobes earlier In order to have a separate address space for text poking, we need to duplicate init_mm early during start_kernel(). This, however, introduces a problem since uprobes functions are called from dup_mmap(), but uprobes is still not initialized in this early stage. Since uprobes initialization is necassary for fork, and since all the dependant initialization has been done when fork is initialized (percpu and vmalloc), move uprobes initialization to fork_init(). It does not seem uprobes introduces any security problem for the poking_mm. Crash and burn if uprobes initialization fails, similarly to other early initializations. Change the init_probes() name to probes_init() to match other early initialization functions name convention. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: ard.biesheuvel@linaro.org Cc: deneen.t.dock@intel.com Cc: kernel-hardening@lists.openwall.com Cc: kristen@linux.intel.com Cc: linux_dti@icloud.com Cc: will.deacon@arm.com Link: https://lkml.kernel.org/r/20190426232303.28381-6-nadav.amit@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-27 07:22:44 +08:00
void __init uprobes_init(void)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
int i;
for (i = 0; i < UPROBES_HASH_SZ; i++)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
mutex_init(&uprobes_mmap_mutex[i]);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
uprobes: Initialize uprobes earlier In order to have a separate address space for text poking, we need to duplicate init_mm early during start_kernel(). This, however, introduces a problem since uprobes functions are called from dup_mmap(), but uprobes is still not initialized in this early stage. Since uprobes initialization is necassary for fork, and since all the dependant initialization has been done when fork is initialized (percpu and vmalloc), move uprobes initialization to fork_init(). It does not seem uprobes introduces any security problem for the poking_mm. Crash and burn if uprobes initialization fails, similarly to other early initializations. Change the init_probes() name to probes_init() to match other early initialization functions name convention. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: ard.biesheuvel@linaro.org Cc: deneen.t.dock@intel.com Cc: kernel-hardening@lists.openwall.com Cc: kristen@linux.intel.com Cc: linux_dti@icloud.com Cc: will.deacon@arm.com Link: https://lkml.kernel.org/r/20190426232303.28381-6-nadav.amit@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-27 07:22:44 +08:00
BUG_ON(register_die_notifier(&uprobe_exception_nb));
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}