OpenCloudOS-Kernel/drivers/cxl/core/port.c

951 lines
23 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/idr.h>
#include <cxlmem.h>
#include <cxl.h>
#include "core.h"
/**
* DOC: cxl core
*
* The CXL core provides a set of interfaces that can be consumed by CXL aware
* drivers. The interfaces allow for creation, modification, and destruction of
* regions, memory devices, ports, and decoders. CXL aware drivers must register
* with the CXL core via these interfaces in order to be able to participate in
* cross-device interleave coordination. The CXL core also establishes and
* maintains the bridge to the nvdimm subsystem.
*
* CXL core introduces sysfs hierarchy to control the devices that are
* instantiated by the core.
*/
static DEFINE_IDA(cxl_port_ida);
static DEFINE_XARRAY(cxl_root_buses);
static ssize_t devtype_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
return sysfs_emit(buf, "%s\n", dev->type->name);
}
static DEVICE_ATTR_RO(devtype);
static int cxl_device_id(struct device *dev)
{
if (dev->type == &cxl_nvdimm_bridge_type)
return CXL_DEVICE_NVDIMM_BRIDGE;
if (dev->type == &cxl_nvdimm_type)
return CXL_DEVICE_NVDIMM;
return 0;
}
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
return sysfs_emit(buf, CXL_MODALIAS_FMT "\n", cxl_device_id(dev));
}
static DEVICE_ATTR_RO(modalias);
static struct attribute *cxl_base_attributes[] = {
&dev_attr_devtype.attr,
&dev_attr_modalias.attr,
NULL,
};
struct attribute_group cxl_base_attribute_group = {
.attrs = cxl_base_attributes,
};
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
static ssize_t start_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct cxl_decoder *cxld = to_cxl_decoder(dev);
u64 start;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
if (is_root_decoder(dev))
start = cxld->platform_res.start;
else
start = cxld->decoder_range.start;
return sysfs_emit(buf, "%#llx\n", start);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
}
static DEVICE_ATTR_ADMIN_RO(start);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
static ssize_t size_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct cxl_decoder *cxld = to_cxl_decoder(dev);
u64 size;
if (is_root_decoder(dev))
size = resource_size(&cxld->platform_res);
else
size = range_len(&cxld->decoder_range);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
return sysfs_emit(buf, "%#llx\n", size);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
}
static DEVICE_ATTR_RO(size);
#define CXL_DECODER_FLAG_ATTR(name, flag) \
static ssize_t name##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct cxl_decoder *cxld = to_cxl_decoder(dev); \
\
return sysfs_emit(buf, "%s\n", \
(cxld->flags & (flag)) ? "1" : "0"); \
} \
static DEVICE_ATTR_RO(name)
CXL_DECODER_FLAG_ATTR(cap_pmem, CXL_DECODER_F_PMEM);
CXL_DECODER_FLAG_ATTR(cap_ram, CXL_DECODER_F_RAM);
CXL_DECODER_FLAG_ATTR(cap_type2, CXL_DECODER_F_TYPE2);
CXL_DECODER_FLAG_ATTR(cap_type3, CXL_DECODER_F_TYPE3);
CXL_DECODER_FLAG_ATTR(locked, CXL_DECODER_F_LOCK);
static ssize_t target_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct cxl_decoder *cxld = to_cxl_decoder(dev);
switch (cxld->target_type) {
case CXL_DECODER_ACCELERATOR:
return sysfs_emit(buf, "accelerator\n");
case CXL_DECODER_EXPANDER:
return sysfs_emit(buf, "expander\n");
}
return -ENXIO;
}
static DEVICE_ATTR_RO(target_type);
static ssize_t emit_target_list(struct cxl_decoder *cxld, char *buf)
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
{
ssize_t offset = 0;
int i, rc = 0;
for (i = 0; i < cxld->interleave_ways; i++) {
struct cxl_dport *dport = cxld->target[i];
struct cxl_dport *next = NULL;
if (!dport)
break;
if (i + 1 < cxld->interleave_ways)
next = cxld->target[i + 1];
rc = sysfs_emit_at(buf, offset, "%d%s", dport->port_id,
next ? "," : "");
if (rc < 0)
return rc;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
offset += rc;
}
return offset;
}
static ssize_t target_list_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct cxl_decoder *cxld = to_cxl_decoder(dev);
ssize_t offset;
unsigned int seq;
int rc;
do {
seq = read_seqbegin(&cxld->target_lock);
rc = emit_target_list(cxld, buf);
} while (read_seqretry(&cxld->target_lock, seq));
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
if (rc < 0)
return rc;
offset = rc;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
rc = sysfs_emit_at(buf, offset, "\n");
if (rc < 0)
return rc;
return offset + rc;
}
static DEVICE_ATTR_RO(target_list);
static struct attribute *cxl_decoder_base_attrs[] = {
&dev_attr_start.attr,
&dev_attr_size.attr,
&dev_attr_locked.attr,
&dev_attr_target_list.attr,
NULL,
};
static struct attribute_group cxl_decoder_base_attribute_group = {
.attrs = cxl_decoder_base_attrs,
};
static struct attribute *cxl_decoder_root_attrs[] = {
&dev_attr_cap_pmem.attr,
&dev_attr_cap_ram.attr,
&dev_attr_cap_type2.attr,
&dev_attr_cap_type3.attr,
NULL,
};
static struct attribute_group cxl_decoder_root_attribute_group = {
.attrs = cxl_decoder_root_attrs,
};
static const struct attribute_group *cxl_decoder_root_attribute_groups[] = {
&cxl_decoder_root_attribute_group,
&cxl_decoder_base_attribute_group,
&cxl_base_attribute_group,
NULL,
};
static struct attribute *cxl_decoder_switch_attrs[] = {
&dev_attr_target_type.attr,
NULL,
};
static struct attribute_group cxl_decoder_switch_attribute_group = {
.attrs = cxl_decoder_switch_attrs,
};
static const struct attribute_group *cxl_decoder_switch_attribute_groups[] = {
&cxl_decoder_switch_attribute_group,
&cxl_decoder_base_attribute_group,
&cxl_base_attribute_group,
NULL,
};
static void cxl_decoder_release(struct device *dev)
{
struct cxl_decoder *cxld = to_cxl_decoder(dev);
struct cxl_port *port = to_cxl_port(dev->parent);
ida_free(&port->decoder_ida, cxld->id);
kfree(cxld);
}
static const struct device_type cxl_decoder_switch_type = {
.name = "cxl_decoder_switch",
.release = cxl_decoder_release,
.groups = cxl_decoder_switch_attribute_groups,
};
static const struct device_type cxl_decoder_root_type = {
.name = "cxl_decoder_root",
.release = cxl_decoder_release,
.groups = cxl_decoder_root_attribute_groups,
};
bool is_root_decoder(struct device *dev)
{
return dev->type == &cxl_decoder_root_type;
}
EXPORT_SYMBOL_NS_GPL(is_root_decoder, CXL);
bool is_cxl_decoder(struct device *dev)
{
return dev->type->release == cxl_decoder_release;
}
EXPORT_SYMBOL_NS_GPL(is_cxl_decoder, CXL);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
struct cxl_decoder *to_cxl_decoder(struct device *dev)
{
if (dev_WARN_ONCE(dev, dev->type->release != cxl_decoder_release,
"not a cxl_decoder device\n"))
return NULL;
return container_of(dev, struct cxl_decoder, dev);
}
EXPORT_SYMBOL_NS_GPL(to_cxl_decoder, CXL);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
static void cxl_port_release(struct device *dev)
{
struct cxl_port *port = to_cxl_port(dev);
ida_free(&cxl_port_ida, port->id);
kfree(port);
}
static const struct attribute_group *cxl_port_attribute_groups[] = {
&cxl_base_attribute_group,
NULL,
};
static const struct device_type cxl_port_type = {
.name = "cxl_port",
.release = cxl_port_release,
.groups = cxl_port_attribute_groups,
};
bool is_cxl_port(struct device *dev)
{
return dev->type == &cxl_port_type;
}
EXPORT_SYMBOL_NS_GPL(is_cxl_port, CXL);
struct cxl_port *to_cxl_port(struct device *dev)
{
if (dev_WARN_ONCE(dev, dev->type != &cxl_port_type,
"not a cxl_port device\n"))
return NULL;
return container_of(dev, struct cxl_port, dev);
}
EXPORT_SYMBOL_NS_GPL(to_cxl_port, CXL);
static void unregister_port(void *_port)
{
struct cxl_port *port = _port;
device_unregister(&port->dev);
}
static void cxl_unlink_uport(void *_port)
{
struct cxl_port *port = _port;
sysfs_remove_link(&port->dev.kobj, "uport");
}
static int devm_cxl_link_uport(struct device *host, struct cxl_port *port)
{
int rc;
rc = sysfs_create_link(&port->dev.kobj, &port->uport->kobj, "uport");
if (rc)
return rc;
return devm_add_action_or_reset(host, cxl_unlink_uport, port);
}
static struct cxl_port *cxl_port_alloc(struct device *uport,
resource_size_t component_reg_phys,
struct cxl_port *parent_port)
{
struct cxl_port *port;
struct device *dev;
int rc;
port = kzalloc(sizeof(*port), GFP_KERNEL);
if (!port)
return ERR_PTR(-ENOMEM);
rc = ida_alloc(&cxl_port_ida, GFP_KERNEL);
if (rc < 0)
goto err;
port->id = rc;
/*
* The top-level cxl_port "cxl_root" does not have a cxl_port as
* its parent and it does not have any corresponding component
* registers as its decode is described by a fixed platform
* description.
*/
dev = &port->dev;
if (parent_port)
dev->parent = &parent_port->dev;
else
dev->parent = uport;
port->uport = uport;
port->component_reg_phys = component_reg_phys;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
ida_init(&port->decoder_ida);
INIT_LIST_HEAD(&port->dports);
device_initialize(dev);
device_set_pm_not_required(dev);
dev->bus = &cxl_bus_type;
dev->type = &cxl_port_type;
return port;
err:
kfree(port);
return ERR_PTR(rc);
}
/**
* devm_cxl_add_port - register a cxl_port in CXL memory decode hierarchy
* @host: host device for devm operations
* @uport: "physical" device implementing this upstream port
* @component_reg_phys: (optional) for configurable cxl_port instances
* @parent_port: next hop up in the CXL memory decode hierarchy
*/
struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport,
resource_size_t component_reg_phys,
struct cxl_port *parent_port)
{
struct cxl_port *port;
struct device *dev;
int rc;
port = cxl_port_alloc(uport, component_reg_phys, parent_port);
if (IS_ERR(port))
return port;
if (parent_port)
port->depth = parent_port->depth + 1;
dev = &port->dev;
if (parent_port)
rc = dev_set_name(dev, "port%d", port->id);
else
rc = dev_set_name(dev, "root%d", port->id);
if (rc)
goto err;
rc = device_add(dev);
if (rc)
goto err;
rc = devm_add_action_or_reset(host, unregister_port, port);
if (rc)
return ERR_PTR(rc);
rc = devm_cxl_link_uport(host, port);
if (rc)
return ERR_PTR(rc);
return port;
err:
put_device(dev);
return ERR_PTR(rc);
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_add_port, CXL);
struct pci_bus *cxl_port_to_pci_bus(struct cxl_port *port)
{
/* There is no pci_bus associated with a CXL platform-root port */
if (is_cxl_root(port))
return NULL;
if (dev_is_pci(port->uport)) {
struct pci_dev *pdev = to_pci_dev(port->uport);
return pdev->subordinate;
}
return xa_load(&cxl_root_buses, (unsigned long)port->uport);
}
EXPORT_SYMBOL_NS_GPL(cxl_port_to_pci_bus, CXL);
static void unregister_pci_bus(void *uport)
{
xa_erase(&cxl_root_buses, (unsigned long)uport);
}
int devm_cxl_register_pci_bus(struct device *host, struct device *uport,
struct pci_bus *bus)
{
int rc;
if (dev_is_pci(uport))
return -EINVAL;
rc = xa_insert(&cxl_root_buses, (unsigned long)uport, bus, GFP_KERNEL);
if (rc)
return rc;
return devm_add_action_or_reset(host, unregister_pci_bus, uport);
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_register_pci_bus, CXL);
/* Find a 2nd level CXL port that has a dport that is an ancestor of @match */
static int match_root_child(struct device *dev, const void *match)
{
const struct device *iter = NULL;
struct cxl_port *port, *parent;
struct cxl_dport *dport;
if (!is_cxl_port(dev))
return 0;
port = to_cxl_port(dev);
if (is_cxl_root(port))
return 0;
parent = to_cxl_port(port->dev.parent);
if (!is_cxl_root(parent))
return 0;
cxl_device_lock(&port->dev);
list_for_each_entry(dport, &port->dports, list) {
iter = match;
while (iter) {
if (iter == dport->dport)
goto out;
iter = iter->parent;
}
}
out:
cxl_device_unlock(&port->dev);
return !!iter;
}
struct cxl_port *find_cxl_root(struct device *dev)
{
struct device *port_dev;
struct cxl_port *root;
port_dev = bus_find_device(&cxl_bus_type, NULL, dev, match_root_child);
if (!port_dev)
return NULL;
root = to_cxl_port(port_dev->parent);
get_device(&root->dev);
put_device(port_dev);
return root;
}
EXPORT_SYMBOL_NS_GPL(find_cxl_root, CXL);
static struct cxl_dport *find_dport(struct cxl_port *port, int id)
{
struct cxl_dport *dport;
device_lock_assert(&port->dev);
list_for_each_entry (dport, &port->dports, list)
if (dport->port_id == id)
return dport;
return NULL;
}
static int add_dport(struct cxl_port *port, struct cxl_dport *new)
{
struct cxl_dport *dup;
device_lock_assert(&port->dev);
dup = find_dport(port, new->port_id);
if (dup)
dev_err(&port->dev,
"unable to add dport%d-%s non-unique port id (%s)\n",
new->port_id, dev_name(new->dport),
dev_name(dup->dport));
else
list_add_tail(&new->list, &port->dports);
return dup ? -EEXIST : 0;
}
static void cxl_dport_remove(void *data)
{
struct cxl_dport *dport = data;
struct cxl_port *port = dport->port;
put_device(dport->dport);
cxl_device_lock(&port->dev);
list_del(&dport->list);
cxl_device_unlock(&port->dev);
}
static void cxl_dport_unlink(void *data)
{
struct cxl_dport *dport = data;
struct cxl_port *port = dport->port;
char link_name[CXL_TARGET_STRLEN];
sprintf(link_name, "dport%d", dport->port_id);
sysfs_remove_link(&port->dev.kobj, link_name);
}
/**
* devm_cxl_add_dport - append downstream port data to a cxl_port
* @host: devm context for allocations
* @port: the cxl_port that references this dport
* @dport_dev: firmware or PCI device representing the dport
* @port_id: identifier for this dport in a decoder's target list
* @component_reg_phys: optional location of CXL component registers
*
* Note that dports are appended to the devm release action's of the
* either the port's host (for root ports), or the port itself (for
* switch ports)
*/
struct cxl_dport *devm_cxl_add_dport(struct device *host, struct cxl_port *port,
struct device *dport_dev, int port_id,
resource_size_t component_reg_phys)
{
char link_name[CXL_TARGET_STRLEN];
struct cxl_dport *dport;
int rc;
if (!host->driver) {
dev_WARN_ONCE(&port->dev, 1, "dport:%s bad devm context\n",
dev_name(dport_dev));
return ERR_PTR(-ENXIO);
}
if (snprintf(link_name, CXL_TARGET_STRLEN, "dport%d", port_id) >=
CXL_TARGET_STRLEN)
return ERR_PTR(-EINVAL);
dport = devm_kzalloc(host, sizeof(*dport), GFP_KERNEL);
if (!dport)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&dport->list);
dport->dport = dport_dev;
dport->port_id = port_id;
dport->component_reg_phys = component_reg_phys;
dport->port = port;
rc = add_dport(port, dport);
if (rc)
return ERR_PTR(rc);
get_device(dport_dev);
rc = devm_add_action_or_reset(host, cxl_dport_remove, dport);
if (rc)
return ERR_PTR(rc);
rc = sysfs_create_link(&port->dev.kobj, &dport_dev->kobj, link_name);
if (rc)
return ERR_PTR(rc);
rc = devm_add_action_or_reset(host, cxl_dport_unlink, dport);
if (rc)
return ERR_PTR(rc);
return dport;
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_add_dport, CXL);
static int decoder_populate_targets(struct cxl_decoder *cxld,
struct cxl_port *port, int *target_map)
{
int i, rc = 0;
if (!target_map)
return 0;
device_lock_assert(&port->dev);
if (list_empty(&port->dports))
return -EINVAL;
write_seqlock(&cxld->target_lock);
for (i = 0; i < cxld->nr_targets; i++) {
struct cxl_dport *dport = find_dport(port, target_map[i]);
if (!dport) {
rc = -ENXIO;
break;
}
cxld->target[i] = dport;
}
write_sequnlock(&cxld->target_lock);
return rc;
}
/**
* cxl_decoder_alloc - Allocate a new CXL decoder
* @port: owning port of this decoder
* @nr_targets: downstream targets accessible by this decoder. All upstream
* ports and root ports must have at least 1 target.
*
* A port should contain one or more decoders. Each of those decoders enable
* some address space for CXL.mem utilization. A decoder is expected to be
* configured by the caller before registering.
*
* Return: A new cxl decoder to be registered by cxl_decoder_add(). The decoder
* is initialized to be a "passthrough" decoder.
*/
static struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port,
unsigned int nr_targets)
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
{
struct cxl_decoder *cxld;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
struct device *dev;
int rc = 0;
if (nr_targets > CXL_DECODER_MAX_INTERLEAVE || nr_targets == 0)
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
return ERR_PTR(-EINVAL);
cxld = kzalloc(struct_size(cxld, target, nr_targets), GFP_KERNEL);
if (!cxld)
return ERR_PTR(-ENOMEM);
rc = ida_alloc(&port->decoder_ida, GFP_KERNEL);
if (rc < 0)
goto err;
cxld->id = rc;
cxld->nr_targets = nr_targets;
seqlock_init(&cxld->target_lock);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
dev = &cxld->dev;
device_initialize(dev);
device_set_pm_not_required(dev);
dev->parent = &port->dev;
dev->bus = &cxl_bus_type;
if (is_cxl_root(port))
cxld->dev.type = &cxl_decoder_root_type;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
else
cxld->dev.type = &cxl_decoder_switch_type;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
/* Pre initialize an "empty" decoder */
cxld->interleave_ways = 1;
cxld->interleave_granularity = PAGE_SIZE;
cxld->target_type = CXL_DECODER_EXPANDER;
cxld->platform_res = (struct resource)DEFINE_RES_MEM(0, 0);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
return cxld;
err:
kfree(cxld);
return ERR_PTR(rc);
}
/**
* cxl_root_decoder_alloc - Allocate a root level decoder
* @port: owning CXL root of this decoder
* @nr_targets: static number of downstream targets
*
* Return: A new cxl decoder to be registered by cxl_decoder_add(). A
* 'CXL root' decoder is one that decodes from a top-level / static platform
* firmware description of CXL resources into a CXL standard decode
* topology.
*/
struct cxl_decoder *cxl_root_decoder_alloc(struct cxl_port *port,
unsigned int nr_targets)
{
if (!is_cxl_root(port))
return ERR_PTR(-EINVAL);
return cxl_decoder_alloc(port, nr_targets);
}
EXPORT_SYMBOL_NS_GPL(cxl_root_decoder_alloc, CXL);
/**
* cxl_switch_decoder_alloc - Allocate a switch level decoder
* @port: owning CXL switch port of this decoder
* @nr_targets: max number of dynamically addressable downstream targets
*
* Return: A new cxl decoder to be registered by cxl_decoder_add(). A
* 'switch' decoder is any decoder that can be enumerated by PCIe
* topology and the HDM Decoder Capability. This includes the decoders
* that sit between Switch Upstream Ports / Switch Downstream Ports and
* Host Bridges / Root Ports.
*/
struct cxl_decoder *cxl_switch_decoder_alloc(struct cxl_port *port,
unsigned int nr_targets)
{
if (is_cxl_root(port))
return ERR_PTR(-EINVAL);
return cxl_decoder_alloc(port, nr_targets);
}
EXPORT_SYMBOL_NS_GPL(cxl_switch_decoder_alloc, CXL);
/**
* cxl_decoder_add_locked - Add a decoder with targets
* @cxld: The cxl decoder allocated by cxl_decoder_alloc()
* @target_map: A list of downstream ports that this decoder can direct memory
* traffic to. These numbers should correspond with the port number
* in the PCIe Link Capabilities structure.
*
* Certain types of decoders may not have any targets. The main example of this
* is an endpoint device. A more awkward example is a hostbridge whose root
* ports get hot added (technically possible, though unlikely).
*
* This is the locked variant of cxl_decoder_add().
*
* Context: Process context. Expects the device lock of the port that owns the
* @cxld to be held.
*
* Return: Negative error code if the decoder wasn't properly configured; else
* returns 0.
*/
int cxl_decoder_add_locked(struct cxl_decoder *cxld, int *target_map)
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
{
struct cxl_port *port;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
struct device *dev;
int rc;
if (WARN_ON_ONCE(!cxld))
return -EINVAL;
if (WARN_ON_ONCE(IS_ERR(cxld)))
return PTR_ERR(cxld);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
if (cxld->interleave_ways < 1)
return -EINVAL;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
port = to_cxl_port(cxld->dev.parent);
rc = decoder_populate_targets(cxld, port, target_map);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
if (rc)
return rc;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
dev = &cxld->dev;
rc = dev_set_name(dev, "decoder%d.%d", port->id, cxld->id);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
if (rc)
return rc;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
/*
* Platform decoder resources should show up with a reasonable name. All
* other resources are just sub ranges within the main decoder resource.
*/
if (is_root_decoder(dev))
cxld->platform_res.name = dev_name(dev);
return device_add(dev);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
}
EXPORT_SYMBOL_NS_GPL(cxl_decoder_add_locked, CXL);
/**
* cxl_decoder_add - Add a decoder with targets
* @cxld: The cxl decoder allocated by cxl_decoder_alloc()
* @target_map: A list of downstream ports that this decoder can direct memory
* traffic to. These numbers should correspond with the port number
* in the PCIe Link Capabilities structure.
*
* This is the unlocked variant of cxl_decoder_add_locked().
* See cxl_decoder_add_locked().
*
* Context: Process context. Takes and releases the device lock of the port that
* owns the @cxld.
*/
int cxl_decoder_add(struct cxl_decoder *cxld, int *target_map)
{
struct cxl_port *port;
int rc;
if (WARN_ON_ONCE(!cxld))
return -EINVAL;
if (WARN_ON_ONCE(IS_ERR(cxld)))
return PTR_ERR(cxld);
port = to_cxl_port(cxld->dev.parent);
cxl_device_lock(&port->dev);
rc = cxl_decoder_add_locked(cxld, target_map);
cxl_device_unlock(&port->dev);
return rc;
}
EXPORT_SYMBOL_NS_GPL(cxl_decoder_add, CXL);
static void cxld_unregister(void *dev)
{
device_unregister(dev);
}
int cxl_decoder_autoremove(struct device *host, struct cxl_decoder *cxld)
{
return devm_add_action_or_reset(host, cxld_unregister, &cxld->dev);
}
EXPORT_SYMBOL_NS_GPL(cxl_decoder_autoremove, CXL);
/**
* __cxl_driver_register - register a driver for the cxl bus
* @cxl_drv: cxl driver structure to attach
* @owner: owning module/driver
* @modname: KBUILD_MODNAME for parent driver
*/
int __cxl_driver_register(struct cxl_driver *cxl_drv, struct module *owner,
const char *modname)
{
if (!cxl_drv->probe) {
pr_debug("%s ->probe() must be specified\n", modname);
return -EINVAL;
}
if (!cxl_drv->name) {
pr_debug("%s ->name must be specified\n", modname);
return -EINVAL;
}
if (!cxl_drv->id) {
pr_debug("%s ->id must be specified\n", modname);
return -EINVAL;
}
cxl_drv->drv.bus = &cxl_bus_type;
cxl_drv->drv.owner = owner;
cxl_drv->drv.mod_name = modname;
cxl_drv->drv.name = cxl_drv->name;
return driver_register(&cxl_drv->drv);
}
EXPORT_SYMBOL_NS_GPL(__cxl_driver_register, CXL);
void cxl_driver_unregister(struct cxl_driver *cxl_drv)
{
driver_unregister(&cxl_drv->drv);
}
EXPORT_SYMBOL_NS_GPL(cxl_driver_unregister, CXL);
static int cxl_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
return add_uevent_var(env, "MODALIAS=" CXL_MODALIAS_FMT,
cxl_device_id(dev));
}
static int cxl_bus_match(struct device *dev, struct device_driver *drv)
{
return cxl_device_id(dev) == to_cxl_drv(drv)->id;
}
static int cxl_bus_probe(struct device *dev)
{
int rc;
/*
* Take the CXL nested lock since the driver core only holds
* @dev->mutex and not @dev->lockdep_mutex.
*/
cxl_nested_lock(dev);
rc = to_cxl_drv(dev->driver)->probe(dev);
cxl_nested_unlock(dev);
return rc;
}
bus: Make remove callback return void The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14 03:35:22 +08:00
static void cxl_bus_remove(struct device *dev)
{
struct cxl_driver *cxl_drv = to_cxl_drv(dev->driver);
cxl_nested_lock(dev);
if (cxl_drv->remove)
cxl_drv->remove(dev);
cxl_nested_unlock(dev);
}
struct bus_type cxl_bus_type = {
.name = "cxl",
.uevent = cxl_bus_uevent,
.match = cxl_bus_match,
.probe = cxl_bus_probe,
.remove = cxl_bus_remove,
};
EXPORT_SYMBOL_NS_GPL(cxl_bus_type, CXL);
static __init int cxl_core_init(void)
{
int rc;
cxl_mbox_init();
rc = cxl_memdev_init();
if (rc)
return rc;
rc = bus_register(&cxl_bus_type);
if (rc)
goto err;
return 0;
err:
cxl_memdev_exit();
cxl_mbox_exit();
return rc;
}
static void cxl_core_exit(void)
{
bus_unregister(&cxl_bus_type);
cxl_memdev_exit();
cxl_mbox_exit();
}
module_init(cxl_core_init);
module_exit(cxl_core_exit);
MODULE_LICENSE("GPL v2");