2013-12-12 17:18:41 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2013 TangoTec Ltd.
|
|
|
|
* Author: Baruch Siach <baruch@tkos.co.il>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* Driver for the Xtensa LX4 GPIO32 Option
|
|
|
|
*
|
|
|
|
* Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
|
|
|
|
*
|
|
|
|
* GPIO32 is a standard optional extension to the Xtensa architecture core that
|
|
|
|
* provides preconfigured output and input ports for intra SoC signaling. The
|
|
|
|
* GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
|
|
|
|
* output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
|
|
|
|
* driver treats input and output states as two distinct devices.
|
|
|
|
*
|
|
|
|
* Access to GPIO32 specific instructions is controlled by the CPENABLE
|
|
|
|
* (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
|
|
|
|
* disables access to all coprocessors. This driver sets the CPENABLE bit
|
|
|
|
* corresponding to GPIO32 before any GPIO32 specific instruction, and restores
|
|
|
|
* CPENABLE state after that.
|
|
|
|
*
|
|
|
|
* This driver is currently incompatible with SMP. The GPIO32 extension is not
|
|
|
|
* guaranteed to be available in all cores. Moreover, each core controls a
|
|
|
|
* different set of IO wires. A theoretical SMP aware version of this driver
|
|
|
|
* would need to have a per core workqueue to do the actual GPIO manipulation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/module.h>
|
2018-09-12 19:34:40 +08:00
|
|
|
#include <linux/gpio/driver.h>
|
2013-12-12 17:18:41 +08:00
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
|
|
|
|
#include <asm/coprocessor.h> /* CPENABLE read/write macros */
|
|
|
|
|
|
|
|
#ifndef XCHAL_CP_ID_XTIOP
|
|
|
|
#error GPIO32 option is not enabled for your xtensa core variant
|
|
|
|
#endif
|
|
|
|
|
2014-01-23 14:50:38 +08:00
|
|
|
#if XCHAL_HAVE_CP
|
|
|
|
|
2013-12-12 17:18:41 +08:00
|
|
|
static inline unsigned long enable_cp(unsigned long *cpenable)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
RSR_CPENABLE(*cpenable);
|
|
|
|
WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
|
|
|
|
|
|
|
|
return flags;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void disable_cp(unsigned long flags, unsigned long cpenable)
|
|
|
|
{
|
|
|
|
WSR_CPENABLE(cpenable);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
2014-01-23 14:50:38 +08:00
|
|
|
#else
|
|
|
|
|
|
|
|
static inline unsigned long enable_cp(unsigned long *cpenable)
|
|
|
|
{
|
|
|
|
*cpenable = 0; /* avoid uninitialized value warning */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void disable_cp(unsigned long flags, unsigned long cpenable)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* XCHAL_HAVE_CP */
|
|
|
|
|
2013-12-12 17:18:41 +08:00
|
|
|
static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
|
|
|
|
{
|
|
|
|
return 1; /* input only */
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
|
|
|
|
{
|
|
|
|
unsigned long flags, saved_cpenable;
|
|
|
|
u32 impwire;
|
|
|
|
|
|
|
|
flags = enable_cp(&saved_cpenable);
|
|
|
|
__asm__ __volatile__("read_impwire %0" : "=a" (impwire));
|
|
|
|
disable_cp(flags, saved_cpenable);
|
|
|
|
|
|
|
|
return !!(impwire & BIT(offset));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
|
|
|
|
int value)
|
|
|
|
{
|
|
|
|
BUG(); /* output only; should never be called */
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
|
|
|
|
{
|
|
|
|
return 0; /* output only */
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
|
|
|
|
{
|
|
|
|
unsigned long flags, saved_cpenable;
|
|
|
|
u32 expstate;
|
|
|
|
|
|
|
|
flags = enable_cp(&saved_cpenable);
|
|
|
|
__asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
|
|
|
|
disable_cp(flags, saved_cpenable);
|
|
|
|
|
|
|
|
return !!(expstate & BIT(offset));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
|
|
|
|
int value)
|
|
|
|
{
|
|
|
|
unsigned long flags, saved_cpenable;
|
|
|
|
u32 mask = BIT(offset);
|
|
|
|
u32 val = value ? BIT(offset) : 0;
|
|
|
|
|
|
|
|
flags = enable_cp(&saved_cpenable);
|
|
|
|
__asm__ __volatile__("wrmsk_expstate %0, %1"
|
|
|
|
:: "a" (val), "a" (mask));
|
|
|
|
disable_cp(flags, saved_cpenable);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct gpio_chip impwire_chip = {
|
|
|
|
.label = "impwire",
|
|
|
|
.base = -1,
|
|
|
|
.ngpio = 32,
|
|
|
|
.get_direction = xtensa_impwire_get_direction,
|
|
|
|
.get = xtensa_impwire_get_value,
|
|
|
|
.set = xtensa_impwire_set_value,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct gpio_chip expstate_chip = {
|
|
|
|
.label = "expstate",
|
|
|
|
.base = -1,
|
|
|
|
.ngpio = 32,
|
|
|
|
.get_direction = xtensa_expstate_get_direction,
|
|
|
|
.get = xtensa_expstate_get_value,
|
|
|
|
.set = xtensa_expstate_set_value,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int xtensa_gpio_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2015-12-08 17:41:44 +08:00
|
|
|
ret = gpiochip_add_data(&impwire_chip, NULL);
|
2013-12-12 17:18:41 +08:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
2015-12-08 17:41:44 +08:00
|
|
|
return gpiochip_add_data(&expstate_chip, NULL);
|
2013-12-12 17:18:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver xtensa_gpio_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "xtensa-gpio",
|
|
|
|
},
|
|
|
|
.probe = xtensa_gpio_probe,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init xtensa_gpio_init(void)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev;
|
|
|
|
|
|
|
|
pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
|
|
|
|
if (IS_ERR(pdev))
|
|
|
|
return PTR_ERR(pdev);
|
|
|
|
|
|
|
|
return platform_driver_register(&xtensa_gpio_driver);
|
|
|
|
}
|
|
|
|
device_initcall(xtensa_gpio_init);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
|
|
|
|
MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
|
|
|
|
MODULE_LICENSE("GPL");
|