2019-05-19 21:51:43 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
/*
|
|
|
|
|
* Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com>
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <stdio.h>
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
|
|
|
|
|
|
#define unlikely(cond) (cond)
|
2017-11-06 21:21:50 +08:00
|
|
|
#include <asm/insn.h>
|
2019-08-30 06:41:18 +08:00
|
|
|
#include "../../../arch/x86/lib/inat.c"
|
|
|
|
|
#include "../../../arch/x86/lib/insn.c"
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
|
2020-09-04 23:30:28 +08:00
|
|
|
#include <asm/orc_types.h>
|
2020-11-13 07:03:32 +08:00
|
|
|
#include <objtool/check.h>
|
|
|
|
|
#include <objtool/elf.h>
|
|
|
|
|
#include <objtool/arch.h>
|
|
|
|
|
#include <objtool/warn.h>
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
static unsigned char op_to_cfi_reg[][2] = {
|
|
|
|
|
{CFI_AX, CFI_R8},
|
|
|
|
|
{CFI_CX, CFI_R9},
|
|
|
|
|
{CFI_DX, CFI_R10},
|
|
|
|
|
{CFI_BX, CFI_R11},
|
|
|
|
|
{CFI_SP, CFI_R12},
|
|
|
|
|
{CFI_BP, CFI_R13},
|
|
|
|
|
{CFI_SI, CFI_R14},
|
|
|
|
|
{CFI_DI, CFI_R15},
|
|
|
|
|
};
|
|
|
|
|
|
2020-04-22 18:32:05 +08:00
|
|
|
static int is_x86_64(const struct elf *elf)
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
{
|
|
|
|
|
switch (elf->ehdr.e_machine) {
|
|
|
|
|
case EM_X86_64:
|
|
|
|
|
return 1;
|
|
|
|
|
case EM_386:
|
|
|
|
|
return 0;
|
|
|
|
|
default:
|
|
|
|
|
WARN("unexpected ELF machine type %d", elf->ehdr.e_machine);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
bool arch_callee_saved_reg(unsigned char reg)
|
|
|
|
|
{
|
|
|
|
|
switch (reg) {
|
|
|
|
|
case CFI_BP:
|
|
|
|
|
case CFI_BX:
|
|
|
|
|
case CFI_R12:
|
|
|
|
|
case CFI_R13:
|
|
|
|
|
case CFI_R14:
|
|
|
|
|
case CFI_R15:
|
|
|
|
|
return true;
|
|
|
|
|
|
|
|
|
|
case CFI_AX:
|
|
|
|
|
case CFI_CX:
|
|
|
|
|
case CFI_DX:
|
|
|
|
|
case CFI_SI:
|
|
|
|
|
case CFI_DI:
|
|
|
|
|
case CFI_SP:
|
|
|
|
|
case CFI_R8:
|
|
|
|
|
case CFI_R9:
|
|
|
|
|
case CFI_R10:
|
|
|
|
|
case CFI_R11:
|
|
|
|
|
case CFI_RA:
|
|
|
|
|
default:
|
|
|
|
|
return false;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
objtool: Rename rela to reloc
Before supporting additional relocation types rename the relevant
types and functions from "rela" to "reloc". This work be done with
the following regex:
sed -e 's/struct rela/struct reloc/g' \
-e 's/\([_\*]\)rela\(s\{0,1\}\)/\1reloc\2/g' \
-e 's/tmprela\(s\{0,1\}\)/tmpreloc\1/g' \
-e 's/relasec/relocsec/g' \
-e 's/rela_list/reloc_list/g' \
-e 's/rela_hash/reloc_hash/g' \
-e 's/add_rela/add_reloc/g' \
-e 's/rela->/reloc->/g' \
-e '/rela[,\.]/{ s/\([^\.>]\)rela\([\.,]\)/\1reloc\2/g ; }' \
-e 's/rela =/reloc =/g' \
-e 's/relas =/relocs =/g' \
-e 's/relas\[/relocs[/g' \
-e 's/relaname =/relocname =/g' \
-e 's/= rela\;/= reloc\;/g' \
-e 's/= relas\;/= relocs\;/g' \
-e 's/= relaname\;/= relocname\;/g' \
-e 's/, rela)/, reloc)/g' \
-e 's/\([ @]\)rela\([ "]\)/\1reloc\2/g' \
-e 's/ rela$/ reloc/g' \
-e 's/, relaname/, relocname/g' \
-e 's/sec->rela/sec->reloc/g' \
-e 's/(\(!\{0,1\}\)rela/(\1reloc/g' \
-i \
arch.h \
arch/x86/decode.c \
check.c \
check.h \
elf.c \
elf.h \
orc_gen.c \
special.c
Notable exceptions which complicate the regex include gelf_*
library calls and standard/expected section names which still use
"rela" because they encode the type of relocation expected. Also, keep
"rela" in the struct because it encodes a specific type of relocation
we currently expect.
It will eventually turn into a member of an anonymous union when a
susequent patch adds implicit addend, or "rel", relocation support.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-05-30 05:01:13 +08:00
|
|
|
unsigned long arch_dest_reloc_offset(int addend)
|
2020-03-27 23:28:45 +08:00
|
|
|
{
|
|
|
|
|
return addend + 4;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
unsigned long arch_jump_destination(struct instruction *insn)
|
|
|
|
|
{
|
|
|
|
|
return insn->offset + insn->len + insn->immediate;
|
|
|
|
|
}
|
|
|
|
|
|
2020-04-23 19:22:10 +08:00
|
|
|
#define ADD_OP(op) \
|
|
|
|
|
if (!(op = calloc(1, sizeof(*op)))) \
|
|
|
|
|
return -1; \
|
|
|
|
|
else for (list_add_tail(&op->list, ops_list); op; op = NULL)
|
|
|
|
|
|
2020-04-22 18:32:05 +08:00
|
|
|
int arch_decode_instruction(const struct elf *elf, const struct section *sec,
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
unsigned long offset, unsigned int maxlen,
|
2019-07-18 09:36:56 +08:00
|
|
|
unsigned int *len, enum insn_type *type,
|
2020-03-27 23:28:47 +08:00
|
|
|
unsigned long *immediate,
|
|
|
|
|
struct list_head *ops_list)
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
{
|
|
|
|
|
struct insn insn;
|
2017-06-28 23:11:07 +08:00
|
|
|
int x86_64, sign;
|
|
|
|
|
unsigned char op1, op2, rex = 0, rex_b = 0, rex_r = 0, rex_w = 0,
|
2017-08-30 01:51:03 +08:00
|
|
|
rex_x = 0, modrm = 0, modrm_mod = 0, modrm_rm = 0,
|
|
|
|
|
modrm_reg = 0, sib = 0;
|
2020-04-23 19:22:10 +08:00
|
|
|
struct stack_op *op = NULL;
|
2020-04-24 22:30:42 +08:00
|
|
|
struct symbol *sym;
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
|
|
|
|
|
x86_64 = is_x86_64(elf);
|
|
|
|
|
if (x86_64 == -1)
|
|
|
|
|
return -1;
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
insn_init(&insn, sec->data->d_buf + offset, maxlen, x86_64);
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
insn_get_length(&insn);
|
|
|
|
|
|
|
|
|
|
if (!insn_complete(&insn)) {
|
2020-04-22 18:32:05 +08:00
|
|
|
WARN("can't decode instruction at %s:0x%lx", sec->name, offset);
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
*len = insn.length;
|
|
|
|
|
*type = INSN_OTHER;
|
|
|
|
|
|
|
|
|
|
if (insn.vex_prefix.nbytes)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
op1 = insn.opcode.bytes[0];
|
|
|
|
|
op2 = insn.opcode.bytes[1];
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
if (insn.rex_prefix.nbytes) {
|
|
|
|
|
rex = insn.rex_prefix.bytes[0];
|
|
|
|
|
rex_w = X86_REX_W(rex) >> 3;
|
|
|
|
|
rex_r = X86_REX_R(rex) >> 2;
|
2017-08-30 01:51:03 +08:00
|
|
|
rex_x = X86_REX_X(rex) >> 1;
|
2017-06-28 23:11:07 +08:00
|
|
|
rex_b = X86_REX_B(rex);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (insn.modrm.nbytes) {
|
|
|
|
|
modrm = insn.modrm.bytes[0];
|
|
|
|
|
modrm_mod = X86_MODRM_MOD(modrm);
|
|
|
|
|
modrm_reg = X86_MODRM_REG(modrm);
|
|
|
|
|
modrm_rm = X86_MODRM_RM(modrm);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (insn.sib.nbytes)
|
|
|
|
|
sib = insn.sib.bytes[0];
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
switch (op1) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
case 0x1:
|
|
|
|
|
case 0x29:
|
|
|
|
|
if (rex_w && !rex_b && modrm_mod == 3 && modrm_rm == 4) {
|
|
|
|
|
|
|
|
|
|
/* add/sub reg, %rsp */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_ADD;
|
|
|
|
|
op->src.reg = op_to_cfi_reg[modrm_reg][rex_r];
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0x50 ... 0x57:
|
|
|
|
|
|
|
|
|
|
/* push reg */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG;
|
|
|
|
|
op->src.reg = op_to_cfi_reg[op1 & 0x7][rex_b];
|
|
|
|
|
op->dest.type = OP_DEST_PUSH;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
break;
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
case 0x58 ... 0x5f:
|
|
|
|
|
|
|
|
|
|
/* pop reg */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_POP;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = op_to_cfi_reg[op1 & 0x7][rex_b];
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0x68:
|
|
|
|
|
case 0x6a:
|
|
|
|
|
/* push immediate */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_CONST;
|
|
|
|
|
op->dest.type = OP_DEST_PUSH;
|
|
|
|
|
}
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0x70 ... 0x7f:
|
|
|
|
|
*type = INSN_JUMP_CONDITIONAL;
|
|
|
|
|
break;
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
case 0x81:
|
|
|
|
|
case 0x83:
|
|
|
|
|
if (rex != 0x48)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
if (modrm == 0xe4) {
|
|
|
|
|
/* and imm, %rsp */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_AND;
|
|
|
|
|
op->src.reg = CFI_SP;
|
|
|
|
|
op->src.offset = insn.immediate.value;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (modrm == 0xc4)
|
|
|
|
|
sign = 1;
|
|
|
|
|
else if (modrm == 0xec)
|
|
|
|
|
sign = -1;
|
|
|
|
|
else
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
/* add/sub imm, %rsp */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_ADD;
|
|
|
|
|
op->src.reg = CFI_SP;
|
|
|
|
|
op->src.offset = insn.immediate.value * sign;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
break;
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
case 0x89:
|
2021-02-03 19:02:18 +08:00
|
|
|
if (rex_w && !rex_r && modrm_reg == 4) {
|
|
|
|
|
|
|
|
|
|
if (modrm_mod == 3) {
|
|
|
|
|
/* mov %rsp, reg */
|
|
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG;
|
|
|
|
|
op->src.reg = CFI_SP;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = op_to_cfi_reg[modrm_rm][rex_b];
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
} else {
|
|
|
|
|
/* skip nontrivial SIB */
|
|
|
|
|
if (modrm_rm == 4 && !(sib == 0x24 && rex_b == rex_x))
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
/* skip RIP relative displacement */
|
|
|
|
|
if (modrm_rm == 5 && modrm_mod == 0)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
/* mov %rsp, disp(%reg) */
|
|
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG;
|
|
|
|
|
op->src.reg = CFI_SP;
|
|
|
|
|
op->dest.type = OP_DEST_REG_INDIRECT;
|
|
|
|
|
op->dest.reg = op_to_cfi_reg[modrm_rm][rex_b];
|
|
|
|
|
op->dest.offset = insn.displacement.value;
|
|
|
|
|
}
|
|
|
|
|
break;
|
2020-04-23 19:22:10 +08:00
|
|
|
}
|
2021-02-03 19:02:18 +08:00
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
break;
|
|
|
|
|
}
|
2017-08-30 01:51:03 +08:00
|
|
|
|
|
|
|
|
if (rex_w && !rex_b && modrm_mod == 3 && modrm_rm == 4) {
|
|
|
|
|
|
|
|
|
|
/* mov reg, %rsp */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG;
|
|
|
|
|
op->src.reg = op_to_cfi_reg[modrm_reg][rex_r];
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
2017-08-30 01:51:03 +08:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
/* fallthrough */
|
|
|
|
|
case 0x88:
|
|
|
|
|
if (!rex_b &&
|
|
|
|
|
(modrm_mod == 1 || modrm_mod == 2) && modrm_rm == 5) {
|
|
|
|
|
|
|
|
|
|
/* mov reg, disp(%rbp) */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG;
|
|
|
|
|
op->src.reg = op_to_cfi_reg[modrm_reg][rex_r];
|
|
|
|
|
op->dest.type = OP_DEST_REG_INDIRECT;
|
|
|
|
|
op->dest.reg = CFI_BP;
|
|
|
|
|
op->dest.offset = insn.displacement.value;
|
|
|
|
|
}
|
2021-02-03 19:02:18 +08:00
|
|
|
break;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
2021-02-03 19:02:18 +08:00
|
|
|
if (rex_w && !rex_b && modrm_rm == 4 && sib == 0x24) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
/* mov reg, disp(%rsp) */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG;
|
|
|
|
|
op->src.reg = op_to_cfi_reg[modrm_reg][rex_r];
|
|
|
|
|
op->dest.type = OP_DEST_REG_INDIRECT;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
op->dest.offset = insn.displacement.value;
|
|
|
|
|
}
|
2021-02-03 19:02:18 +08:00
|
|
|
break;
|
2017-06-28 23:11:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0x8b:
|
|
|
|
|
if (rex_w && !rex_b && modrm_mod == 1 && modrm_rm == 5) {
|
|
|
|
|
|
|
|
|
|
/* mov disp(%rbp), reg */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG_INDIRECT;
|
|
|
|
|
op->src.reg = CFI_BP;
|
|
|
|
|
op->src.offset = insn.displacement.value;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = op_to_cfi_reg[modrm_reg][rex_r];
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
} else if (rex_w && !rex_b && sib == 0x24 &&
|
|
|
|
|
modrm_mod != 3 && modrm_rm == 4) {
|
|
|
|
|
|
|
|
|
|
/* mov disp(%rsp), reg */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_REG_INDIRECT;
|
|
|
|
|
op->src.reg = CFI_SP;
|
|
|
|
|
op->src.offset = insn.displacement.value;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = op_to_cfi_reg[modrm_reg][rex_r];
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
}
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
break;
|
|
|
|
|
|
2016-10-11 04:24:01 +08:00
|
|
|
case 0x8d:
|
2017-08-30 01:51:03 +08:00
|
|
|
if (sib == 0x24 && rex_w && !rex_b && !rex_x) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
if (!insn.displacement.value) {
|
|
|
|
|
/* lea (%rsp), reg */
|
|
|
|
|
op->src.type = OP_SRC_REG;
|
|
|
|
|
} else {
|
|
|
|
|
/* lea disp(%rsp), reg */
|
|
|
|
|
op->src.type = OP_SRC_ADD;
|
|
|
|
|
op->src.offset = insn.displacement.value;
|
|
|
|
|
}
|
|
|
|
|
op->src.reg = CFI_SP;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = op_to_cfi_reg[modrm_reg][rex_r];
|
2017-09-27 23:36:38 +08:00
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
2017-08-30 01:51:03 +08:00
|
|
|
} else if (rex == 0x48 && modrm == 0x65) {
|
2017-07-28 04:56:55 +08:00
|
|
|
|
2017-08-30 01:51:03 +08:00
|
|
|
/* lea disp(%rbp), %rsp */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_ADD;
|
|
|
|
|
op->src.reg = CFI_BP;
|
|
|
|
|
op->src.offset = insn.displacement.value;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
2017-07-28 04:56:55 +08:00
|
|
|
|
2017-08-30 01:51:03 +08:00
|
|
|
} else if (rex == 0x49 && modrm == 0x62 &&
|
|
|
|
|
insn.displacement.value == -8) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* lea -0x8(%r10), %rsp
|
|
|
|
|
*
|
|
|
|
|
* Restoring rsp back to its original value after a
|
|
|
|
|
* stack realignment.
|
|
|
|
|
*/
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_ADD;
|
|
|
|
|
op->src.reg = CFI_R10;
|
|
|
|
|
op->src.offset = -8;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
2017-08-30 01:51:03 +08:00
|
|
|
} else if (rex == 0x49 && modrm == 0x65 &&
|
|
|
|
|
insn.displacement.value == -16) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* lea -0x10(%r13), %rsp
|
|
|
|
|
*
|
|
|
|
|
* Restoring rsp back to its original value after a
|
|
|
|
|
* stack realignment.
|
|
|
|
|
*/
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_ADD;
|
|
|
|
|
op->src.reg = CFI_R13;
|
|
|
|
|
op->src.offset = -16;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0x8f:
|
|
|
|
|
/* pop to mem */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_POP;
|
|
|
|
|
op->dest.type = OP_DEST_MEM;
|
|
|
|
|
}
|
2016-10-11 04:24:01 +08:00
|
|
|
break;
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
case 0x90:
|
|
|
|
|
*type = INSN_NOP;
|
|
|
|
|
break;
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
case 0x9c:
|
|
|
|
|
/* pushf */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_CONST;
|
|
|
|
|
op->dest.type = OP_DEST_PUSHF;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0x9d:
|
|
|
|
|
/* popf */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_POPF;
|
|
|
|
|
op->dest.type = OP_DEST_MEM;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
break;
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
case 0x0f:
|
2017-06-28 23:11:07 +08:00
|
|
|
|
2019-02-25 19:50:09 +08:00
|
|
|
if (op2 == 0x01) {
|
|
|
|
|
|
|
|
|
|
if (modrm == 0xca)
|
|
|
|
|
*type = INSN_CLAC;
|
|
|
|
|
else if (modrm == 0xcb)
|
|
|
|
|
*type = INSN_STAC;
|
|
|
|
|
|
|
|
|
|
} else if (op2 >= 0x80 && op2 <= 0x8f) {
|
objtool: Assume unannotated UD2 instructions are dead ends
Arnd reported some false positive warnings with GCC 7:
drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()
When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.
Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable(). So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.
Previously, objtool *did* assume UD2 was always a dead end. That
changed with the following commit:
d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end. However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:
9a93848fe787 ("x86/debug: Implement __WARN() using UD0")
For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().
But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 04:56:53 +08:00
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
*type = INSN_JUMP_CONDITIONAL;
|
objtool: Assume unannotated UD2 instructions are dead ends
Arnd reported some false positive warnings with GCC 7:
drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()
When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.
Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable(). So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.
Previously, objtool *did* assume UD2 was always a dead end. That
changed with the following commit:
d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end. However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:
9a93848fe787 ("x86/debug: Implement __WARN() using UD0")
For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().
But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 04:56:53 +08:00
|
|
|
|
|
|
|
|
} else if (op2 == 0x05 || op2 == 0x07 || op2 == 0x34 ||
|
|
|
|
|
op2 == 0x35) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
/* sysenter, sysret */
|
|
|
|
|
*type = INSN_CONTEXT_SWITCH;
|
2017-06-28 23:11:07 +08:00
|
|
|
|
objtool: Assume unannotated UD2 instructions are dead ends
Arnd reported some false positive warnings with GCC 7:
drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()
When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.
Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable(). So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.
Previously, objtool *did* assume UD2 was always a dead end. That
changed with the following commit:
d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end. However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:
9a93848fe787 ("x86/debug: Implement __WARN() using UD0")
For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().
But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 04:56:53 +08:00
|
|
|
} else if (op2 == 0x0b || op2 == 0xb9) {
|
|
|
|
|
|
|
|
|
|
/* ud2 */
|
|
|
|
|
*type = INSN_BUG;
|
|
|
|
|
|
|
|
|
|
} else if (op2 == 0x0d || op2 == 0x1f) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
/* nopl/nopw */
|
|
|
|
|
*type = INSN_NOP;
|
2017-06-28 23:11:07 +08:00
|
|
|
|
objtool: Assume unannotated UD2 instructions are dead ends
Arnd reported some false positive warnings with GCC 7:
drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()
When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.
Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable(). So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.
Previously, objtool *did* assume UD2 was always a dead end. That
changed with the following commit:
d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end. However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:
9a93848fe787 ("x86/debug: Implement __WARN() using UD0")
For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().
But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 04:56:53 +08:00
|
|
|
} else if (op2 == 0xa0 || op2 == 0xa8) {
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
/* push fs/gs */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_CONST;
|
|
|
|
|
op->dest.type = OP_DEST_PUSH;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
} else if (op2 == 0xa1 || op2 == 0xa9) {
|
|
|
|
|
|
|
|
|
|
/* pop fs/gs */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_POP;
|
|
|
|
|
op->dest.type = OP_DEST_MEM;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
}
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
case 0xc9:
|
|
|
|
|
/*
|
|
|
|
|
* leave
|
|
|
|
|
*
|
|
|
|
|
* equivalent to:
|
|
|
|
|
* mov bp, sp
|
|
|
|
|
* pop bp
|
|
|
|
|
*/
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op)
|
|
|
|
|
op->dest.type = OP_DEST_LEAVE;
|
2017-06-28 23:11:07 +08:00
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
break;
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
case 0xe3:
|
|
|
|
|
/* jecxz/jrcxz */
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
*type = INSN_JUMP_CONDITIONAL;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0xe9:
|
|
|
|
|
case 0xeb:
|
|
|
|
|
*type = INSN_JUMP_UNCONDITIONAL;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0xc2:
|
|
|
|
|
case 0xc3:
|
|
|
|
|
*type = INSN_RETURN;
|
|
|
|
|
break;
|
|
|
|
|
|
2020-04-02 16:15:51 +08:00
|
|
|
case 0xcf: /* iret */
|
2020-04-24 22:30:42 +08:00
|
|
|
/*
|
|
|
|
|
* Handle sync_core(), which has an IRET to self.
|
|
|
|
|
* All other IRET are in STT_NONE entry code.
|
|
|
|
|
*/
|
|
|
|
|
sym = find_symbol_containing(sec, offset);
|
|
|
|
|
if (sym && sym->type == STT_FUNC) {
|
|
|
|
|
ADD_OP(op) {
|
|
|
|
|
/* add $40, %rsp */
|
|
|
|
|
op->src.type = OP_SRC_ADD;
|
|
|
|
|
op->src.reg = CFI_SP;
|
|
|
|
|
op->src.offset = 5*8;
|
|
|
|
|
op->dest.type = OP_DEST_REG;
|
|
|
|
|
op->dest.reg = CFI_SP;
|
|
|
|
|
}
|
|
|
|
|
break;
|
2020-04-23 19:22:10 +08:00
|
|
|
}
|
2020-04-24 22:30:42 +08:00
|
|
|
|
|
|
|
|
/* fallthrough */
|
2020-04-02 16:15:51 +08:00
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
case 0xca: /* retf */
|
|
|
|
|
case 0xcb: /* retf */
|
|
|
|
|
*type = INSN_CONTEXT_SWITCH;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0xe8:
|
|
|
|
|
*type = INSN_CALL;
|
2020-04-14 18:36:12 +08:00
|
|
|
/*
|
|
|
|
|
* For the impact on the stack, a CALL behaves like
|
|
|
|
|
* a PUSH of an immediate value (the return address).
|
|
|
|
|
*/
|
|
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_CONST;
|
|
|
|
|
op->dest.type = OP_DEST_PUSH;
|
|
|
|
|
}
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
break;
|
|
|
|
|
|
2019-02-25 18:10:55 +08:00
|
|
|
case 0xfc:
|
|
|
|
|
*type = INSN_CLD;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case 0xfd:
|
|
|
|
|
*type = INSN_STD;
|
|
|
|
|
break;
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
case 0xff:
|
2017-06-28 23:11:07 +08:00
|
|
|
if (modrm_reg == 2 || modrm_reg == 3)
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
*type = INSN_CALL_DYNAMIC;
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
else if (modrm_reg == 4)
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
*type = INSN_JUMP_DYNAMIC;
|
2017-06-28 23:11:07 +08:00
|
|
|
|
|
|
|
|
else if (modrm_reg == 5)
|
|
|
|
|
|
|
|
|
|
/* jmpf */
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
*type = INSN_CONTEXT_SWITCH;
|
|
|
|
|
|
2017-06-28 23:11:07 +08:00
|
|
|
else if (modrm_reg == 6) {
|
|
|
|
|
|
|
|
|
|
/* push from mem */
|
2020-04-23 19:22:10 +08:00
|
|
|
ADD_OP(op) {
|
|
|
|
|
op->src.type = OP_SRC_CONST;
|
|
|
|
|
op->dest.type = OP_DEST_PUSH;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
}
|
|
|
|
|
|
objtool: Add tool to perform compile-time stack metadata validation
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 12:22:41 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
*immediate = insn.immediate.nbytes ? insn.immediate.value : 0;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
2017-06-28 23:11:07 +08:00
|
|
|
|
2020-03-25 22:34:50 +08:00
|
|
|
void arch_initial_func_cfi_state(struct cfi_init_state *state)
|
2017-06-28 23:11:07 +08:00
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < CFI_NUM_REGS; i++) {
|
|
|
|
|
state->regs[i].base = CFI_UNDEFINED;
|
|
|
|
|
state->regs[i].offset = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* initial CFA (call frame address) */
|
|
|
|
|
state->cfa.base = CFI_SP;
|
|
|
|
|
state->cfa.offset = 8;
|
|
|
|
|
|
|
|
|
|
/* initial RA (return address) */
|
2021-01-22 05:29:24 +08:00
|
|
|
state->regs[CFI_RA].base = CFI_CFA;
|
|
|
|
|
state->regs[CFI_RA].offset = -8;
|
2017-06-28 23:11:07 +08:00
|
|
|
}
|
2020-06-12 22:05:26 +08:00
|
|
|
|
|
|
|
|
const char *arch_nop_insn(int len)
|
|
|
|
|
{
|
|
|
|
|
static const char nops[5][5] = {
|
|
|
|
|
/* 1 */ { 0x90 },
|
|
|
|
|
/* 2 */ { 0x66, 0x90 },
|
|
|
|
|
/* 3 */ { 0x0f, 0x1f, 0x00 },
|
|
|
|
|
/* 4 */ { 0x0f, 0x1f, 0x40, 0x00 },
|
|
|
|
|
/* 5 */ { 0x0f, 0x1f, 0x44, 0x00, 0x00 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
if (len < 1 || len > 5) {
|
|
|
|
|
WARN("invalid NOP size: %d\n", len);
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return nops[len-1];
|
|
|
|
|
}
|
2020-09-04 23:30:28 +08:00
|
|
|
|
|
|
|
|
int arch_decode_hint_reg(struct instruction *insn, u8 sp_reg)
|
|
|
|
|
{
|
|
|
|
|
struct cfi_reg *cfa = &insn->cfi.cfa;
|
|
|
|
|
|
|
|
|
|
switch (sp_reg) {
|
|
|
|
|
case ORC_REG_UNDEFINED:
|
|
|
|
|
cfa->base = CFI_UNDEFINED;
|
|
|
|
|
break;
|
|
|
|
|
case ORC_REG_SP:
|
|
|
|
|
cfa->base = CFI_SP;
|
|
|
|
|
break;
|
|
|
|
|
case ORC_REG_BP:
|
|
|
|
|
cfa->base = CFI_BP;
|
|
|
|
|
break;
|
|
|
|
|
case ORC_REG_SP_INDIRECT:
|
|
|
|
|
cfa->base = CFI_SP_INDIRECT;
|
|
|
|
|
break;
|
|
|
|
|
case ORC_REG_R10:
|
|
|
|
|
cfa->base = CFI_R10;
|
|
|
|
|
break;
|
|
|
|
|
case ORC_REG_R13:
|
|
|
|
|
cfa->base = CFI_R13;
|
|
|
|
|
break;
|
|
|
|
|
case ORC_REG_DI:
|
|
|
|
|
cfa->base = CFI_DI;
|
|
|
|
|
break;
|
|
|
|
|
case ORC_REG_DX:
|
|
|
|
|
cfa->base = CFI_DX;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|