UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/configs/powernv_defconfig

350 lines
7.5 KiB
Plaintext
Raw Normal View History

powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_PPC64=y
CONFIG_NR_CPUS=2048
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_AUDIT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
powerpc/configs: Bump kernel ring buffer size on 64 bit configs When we issue a system reset, every CPU in the box prints an Oops, including a backtrace. Each of these can be quite large (over 4kB) and we may end up wrapping the ring buffer and losing important information. Bump the base size from 128kB to 256kB and the per CPU size from 4kB to 8kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:51 +08:00
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_NUMA_BALANCING=y
CONFIG_CGROUPS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
powerpc/configs: Update for symbol movement only Update defconfigs for symbols that have moved around, without their value changing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23 13:37:21 +08:00
CONFIG_CGROUP_BPF=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_USER_NS=y
CONFIG_BLK_DEV_INITRD=y
powerpc/64: Include bpf/bcc related config options in defconfigs Specifically: - CONFIG_BPF_SYSCALL - CONFIG_NET_SCHED - CONFIG_NET_CLS_BPF - CONFIG_NET_CLS_ACT - CONFIG_NET_ACT_BPF - CONFIG_CGROUP_BPF - CONFIG_UPROBE_EVENT ... in pseries, ppc64 and powernv defconfigs. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-08 02:06:41 +08:00
CONFIG_BPF_SYSCALL=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
powerpc/configs: Make oprofile a module Most people use perf these days, so save about 31kB by making oprofile a module. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 05:22:00 +08:00
CONFIG_OPROFILE=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_PARTITION_ADVANCED=y
powerpc/configs: Disable SCOM_DEBUGFS in powernv_defconfig SCOM_DEBUGFS is really not needed for anything other than low-level hardware debugging. mpe: It also introduces a large and poorly documented/understood attack surface. Although the interface is only available to root, the kernel still aspires to restrict root to accessing hardware through well defined interfaces, which this is not. opal-prd uses its own interface (/dev/prd) for SCOM access, so it doesn't need SCOM_DEBUGFS. At some point in the future we'll introduce a debug config fragment where this can go instead. Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190509051119.7694-5-ajd@linux.ibm.com
2019-05-09 13:11:19 +08:00
# CONFIG_SCOM_DEBUGFS is not set
powerpc/powernv: Add powernv firmware interface drivers to powernv_defconfig There are a few firmware-provided interfaces for OpenPOWER platforms: the PRD infrastructure, IPMI support, and MTD access to the PNOR flash. This change adds these to powernv_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:04 +08:00
CONFIG_OPAL_PRD=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_PPC_MEMTRACE=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
powerpc/powernv: Don't select the cpufreq governors Deciding wich govenors should be built into the kernel can be left to users to configure. Fixes: 81f359027a3a ("cpufreq: powernv: Select CPUFreq related Kconfig options for powernv") Signed-off-by: Joel Stanley <joel@jms.id.au> [mpe: Update powernv/ppc64 defconfigs to enable them by default] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-21 10:14:28 +08:00
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_CPU_IDLE=y
CONFIG_HZ_100=y
CONFIG_BINFMT_MISC=m
CONFIG_PPC_TRANSACTIONAL_MEM=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
powerpc: Enable CONFIG_KEXEC_FILE in powerpc server defconfigs. Enable CONFIG_KEXEC_FILE in powernv_defconfig, ppc64_defconfig and pseries_defconfig. It depends on CONFIG_CRYPTO_SHA256=y, so add that as well. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-29 20:45:54 +08:00
CONFIG_KEXEC_FILE=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_TRANSPARENT_HUGEPAGE=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_PPC_64K_PAGES=y
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_PM=y
CONFIG_HOTPLUG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_IPIP=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_SIT=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
powerpc/64: Include bpf/bcc related config options in defconfigs Specifically: - CONFIG_BPF_SYSCALL - CONFIG_NET_SCHED - CONFIG_NET_CLS_BPF - CONFIG_NET_CLS_ACT - CONFIG_NET_ACT_BPF - CONFIG_CGROUP_BPF - CONFIG_UPROBE_EVENT ... in pseries, ppc64 and powernv defconfigs. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-08 02:06:41 +08:00
CONFIG_NET_SCHED=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_BPF=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_DNS_RESOLVER=y
powerpc/64: Add BPF_JIT to powernv and pseries defconfigs Commit db9112173b18 ("powerpc: Turn on BPF_JIT in ppc64_defconfig") only added BPF_JIT to the ppc64 defconfig. Add it to our powernv and pseries defconfigs too. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-12 18:17:34 +08:00
CONFIG_BPF_JIT=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
# CONFIG_WIRELESS is not set
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
powerpc/powernv: Add powernv firmware interface drivers to powernv_defconfig There are a few firmware-provided interfaces for OpenPOWER platforms: the PRD infrastructure, IPMI support, and MTD access to the PNOR flash. This change adds these to powernv_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:04 +08:00
CONFIG_MTD=y
powerpc: Add MTD_BLOCK to powernv_defconfig This is so we can use the powernv_flash mtd driver as an block device. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-08 11:13:15 +08:00
CONFIG_MTD_BLOCK=y
powerpc/powernv: Add powernv firmware interface drivers to powernv_defconfig There are a few firmware-provided interfaces for OpenPOWER platforms: the PRD infrastructure, IPMI support, and MTD access to the PNOR flash. This change adds these to powernv_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:04 +08:00
CONFIG_MTD_POWERNV_FLASH=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_BLK_DEV_RAM=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_BLK_DEV_RAM_SIZE=65536
powerpc: Add aacraid and nvme to powernv_defconfig These adapters can be found in a number of our systems, so let's enable the corresponding drivers by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 09:51:00 +08:00
CONFIG_BLK_DEV_NVME=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_BLK_DEV_SD=y
powerpc/configs: Change a few things from built in to modules Change a few devices and filesystems that are seldom used any more from built in to modules. This reduces our vmlinux about 500kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:52 +08:00
CONFIG_CHR_DEV_ST=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_SCSI_CONSTANTS=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_FC_ATTRS=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
powerpc: Add aacraid and nvme to powernv_defconfig These adapters can be found in a number of our systems, so let's enable the corresponding drivers by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 09:51:00 +08:00
CONFIG_SCSI_AACRAID=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_SCSI_MPT2SAS=m
powerpc/configs: Change a few things from built in to modules Change a few devices and filesystems that are seldom used any more from built in to modules. This reduces our vmlinux about 500kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:52 +08:00
CONFIG_SCSI_SYM53C8XX_2=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_IPR=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_UEVENT=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_NETCONSOLE=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_TUN=m
CONFIG_VETH=m
powerpc/configs: Change a few things from built in to modules Change a few devices and filesystems that are seldom used any more from built in to modules. This reduces our vmlinux about 500kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:52 +08:00
CONFIG_VORTEX=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
powerpc/configs: Change a few things from built in to modules Change a few devices and filesystems that are seldom used any more from built in to modules. This reduces our vmlinux about 500kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:52 +08:00
CONFIG_PCNET32=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_TIGON3=y
CONFIG_BNX2X=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
# CONFIG_CAVIUM_PTP is not set
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_CHELSIO_T1=m
CONFIG_BE2NET=m
CONFIG_S2IO=m
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IXGB=m
CONFIG_IXGBE=m
powerpc/configs: Enable Intel i40e on 64 bit configs We are starting to see i40e adapters in recent machines, so enable it in our configs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:53 +08:00
CONFIG_I40E=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_MLX4_EN=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_MLX5_CORE=m
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_CORE_IPOIB=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_USB_NET_DRIVERS=m
# CONFIG_WLAN is not set
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_INPUT_EVDEV=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_SERIAL_8250_PCI=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_SERIAL_JSM=m
powerpc/powernv: Add powernv firmware interface drivers to powernv_defconfig There are a few firmware-provided interfaces for OpenPOWER platforms: the PRD infrastructure, IPMI support, and MTD access to the PNOR flash. This change adds these to powernv_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:04 +08:00
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_POWERNV=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
# CONFIG_DEVPORT is not set
powerpc/configs: Enable I2C_CHARDEV for pseries and powernv i2c-dev provides an interface for userspace programs to interact with I2C devices, and is very helpful for I2C-related debugging. Enable it in pseries_defconfig and powernv_defconfig. It's already enabled in many other powerpc defconfigs. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-12 10:16:59 +08:00
CONFIG_I2C_CHARDEV=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
# CONFIG_PTP_1588_CLOCK is not set
powerpc/powernv: Add AST graphics driver to powernv_defconfig Most current OpenPOWER platforms have an AST BMC, so add graphics support via the AST DRM driver. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:05 +08:00
CONFIG_DRM=y
CONFIG_DRM_AST=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_OF=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_FB_MATROX=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_FB_RADEON=m
CONFIG_FB_IBM_GXT4500=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_LCD_PLATFORM=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_BACKLIGHT_GENERIC=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ITE=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SUNPLUS=m
CONFIG_USB_HID=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_MON=m
powerpc/powernv: Add XHCI and USB storage to defconfig These are common on bare metal machines, so put them in the defconfig. This adds 216KB to the vmlinux size Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06 10:55:43 +08:00
CONFIG_USB_XHCI_HCD=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_USB_OHCI_HCD_PCI=m
powerpc/powernv: Add XHCI and USB storage to defconfig These are common on bare metal machines, so put them in the defconfig. This adds 216KB to the vmlinux size Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06 10:55:43 +08:00
CONFIG_USB_STORAGE=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_POWERNV=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_CXGB3=m
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_GENERIC=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
# CONFIG_VIRTIO_MENU is not set
CONFIG_LIBNVDIMM=y
# CONFIG_ND_BLK is not set
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
powerpc/configs: Remove old symbols from defconfigs Update defconfigs to remove old symbols and comments referencing old symbols. Dropped: * AVERAGE * INET_LRO * EXT3_DEFAULTS_TO_ORDERED * EXT3_FS_XATTR * I2O * INFINIBAND_AMSO1100 * INFINIBAND_EHCA * IP1000 Replaced: * BLK_DEV_XIP -> BLK_DEV_RAM_DAX * CLK_PPC_CORENET -> CLK_QORIQ * EXT2_FS_XIP -> FS_DAX * EXT3_FS* -> EXT4_FS* Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-05 14:12:35 +08:00
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_FANOTIFY=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_OVERLAY_FS=m
powerpc/configs: Re-enable ISO9660_FS as a built-in in 64 bit configs It turns out cloud-config uses ISO9660 filesystems to inject configuration data into cloud images. The cloud-config failures when ISO9660_FS is not enabled are cryptic, and building it in makes mainline testing easier, so re-enable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 05:21:59 +08:00
CONFIG_ISO9660_FS=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_UDF_FS=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_MSDOS_FS=m
powerpc/configs: Change a few things from built in to modules Change a few devices and filesystems that are seldom used any more from built in to modules. This reduces our vmlinux about 500kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:52 +08:00
CONFIG_VFAT_FS=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_PSTORE=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_NFS_FS=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_NFS_V3_ACL=y
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_NFS_V4=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_NFSD=m
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_STACKOVERFLOW=y
powerpc/configs: Re-enable HARD/SOFT lockup detectors In commit 05a4a9527931 ("kernel/watchdog: split up config options"), CONFIG_LOCKUP_DETECTOR was split into two separate config options, CONFIG_HARDLOCKUP_DETECTOR and CONFIG_SOFTLOCKUP_DETECTOR. Our defconfigs still have CONFIG_LOCKUP_DETECTOR=y, but that is no longer user selectable, and we don't mention the new options, so we end up with none of them enabled. So update the defconfigs to turn on the new SOFT and HARD options, the end result being the same as what we had previously. Fixes: 05a4a9527931 ("kernel/watchdog: split up config options") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-09 18:57:55 +08:00
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
powerpc/configs: Enable function trace by default Most (all?) distros turn these on, so it makes sense to enable them for testing coverage, and they're also useful for developers. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Reword change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-13 15:03:09 +08:00
CONFIG_FUNCTION_TRACER=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_SCHED_TRACER=y
powerpc/configs: Enable function trace by default Most (all?) distros turn these on, so it makes sense to enable them for testing coverage, and they're also useful for developers. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Reword change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-13 15:03:09 +08:00
CONFIG_FTRACE_SYSCALLS=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_BLK_DEV_IO_TRACE=y
powerpc: Add PPC_EMULATED_STATS to powernv_defconfig This is useful, especially for developers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-21 13:24:49 +08:00
CONFIG_PPC_EMULATED_STATS=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
powerpc/configs: Re-enable POWER8 crc32c The config option for the POWER8 crc32c recently changed from CONFIG_CRYPT_CRC32C_VPMSUM to CONFIG_CRYPTO_CRC32C_VPMSUM. Update the configs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-23 05:22:01 +08:00
CONFIG_CRYPTO_CRC32C_VPMSUM=m
powerpc/config: powernv_defconfig updates For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-30 18:31:50 +08:00
CONFIG_CRYPTO_CRCT10DIF_VPMSUM=m
powerpc/configs: Turn on PPC crypto implementations in the server defconfigs These are the PPC optimised versions of various crypto algorithms, so we should turn them on by default to get test coverage. Suggested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-02 18:06:17 +08:00
CONFIG_CRYPTO_MD5_PPC=m
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_CRYPTO_MICHAEL_MIC=m
powerpc/configs: Update for symbol movement only Update defconfigs for symbols that have moved around, without their value changing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23 13:37:21 +08:00
CONFIG_CRYPTO_SHA1_PPC=m
powerpc: Enable CONFIG_KEXEC_FILE in powerpc server defconfigs. Enable CONFIG_KEXEC_FILE in powernv_defconfig, ppc64_defconfig and pseries_defconfig. It depends on CONFIG_CRYPTO_SHA256=y, so add that as well. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-29 20:45:54 +08:00
CONFIG_CRYPTO_SHA256=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_DEV_NX=y
powerpc/configs: Enable VMX crypto We see big improvements with the VMX crypto functions (often 10x or more), so enable it as a module. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-30 18:39:50 +08:00
CONFIG_CRYPTO_DEV_VMX=y
powerpc/powernv: Add powernv_defconfig This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-24 09:55:03 +08:00
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=m
powerpc/configs: Update for symbol movement only Update defconfigs for symbols that have moved around, without their value changing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23 13:37:21 +08:00
CONFIG_VHOST_NET=m
powerpc/config: Enable CONFIG_PRINTK_TIME for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same or higher value than the default (currently 17). Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-26 22:10:56 +08:00
CONFIG_PRINTK_TIME=y