OpenCloudOS-Kernel/drivers/thermal/samsung/exynos_tmu.c

1458 lines
42 KiB
C
Raw Normal View History

/*
* exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
*
* Copyright (C) 2014 Samsung Electronics
* Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
* Lukasz Majewski <l.majewski@samsung.com>
*
* Copyright (C) 2011 Samsung Electronics
* Donggeun Kim <dg77.kim@samsung.com>
* Amit Daniel Kachhap <amit.kachhap@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include "exynos_tmu.h"
#include "../thermal_core.h"
/* Exynos generic registers */
#define EXYNOS_TMU_REG_TRIMINFO 0x0
#define EXYNOS_TMU_REG_CONTROL 0x20
#define EXYNOS_TMU_REG_STATUS 0x28
#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
#define EXYNOS_TMU_REG_INTEN 0x70
#define EXYNOS_TMU_REG_INTSTAT 0x74
#define EXYNOS_TMU_REG_INTCLEAR 0x78
#define EXYNOS_TMU_TEMP_MASK 0xff
#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
#define EXYNOS_TMU_CORE_EN_SHIFT 0
/* Exynos3250 specific registers */
#define EXYNOS_TMU_TRIMINFO_CON1 0x10
/* Exynos4210 specific registers */
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
/* Exynos5250, Exynos4412, Exynos3250 specific registers */
#define EXYNOS_TMU_TRIMINFO_CON2 0x14
#define EXYNOS_THD_TEMP_RISE 0x50
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_MASK 0xffff
#define EXYNOS_EMUL_TIME_SHIFT 16
#define EXYNOS_EMUL_DATA_SHIFT 8
#define EXYNOS_EMUL_DATA_MASK 0xFF
#define EXYNOS_EMUL_ENABLE 0x1
/* Exynos5260 specific */
#define EXYNOS5260_TMU_REG_INTEN 0xC0
#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
#define EXYNOS5260_EMUL_CON 0x100
/* Exynos4412 specific */
#define EXYNOS4412_MUX_ADDR_VALUE 6
#define EXYNOS4412_MUX_ADDR_SHIFT 20
/* Exynos5433 specific registers */
#define EXYNOS5433_TMU_REG_CONTROL1 0x024
#define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c
#define EXYNOS5433_TMU_COUNTER_VALUE0 0x030
#define EXYNOS5433_TMU_COUNTER_VALUE1 0x034
#define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044
#define EXYNOS5433_THD_TEMP_RISE3_0 0x050
#define EXYNOS5433_THD_TEMP_RISE7_4 0x054
#define EXYNOS5433_THD_TEMP_FALL3_0 0x060
#define EXYNOS5433_THD_TEMP_FALL7_4 0x064
#define EXYNOS5433_TMU_REG_INTEN 0x0c0
#define EXYNOS5433_TMU_REG_INTPEND 0x0c8
#define EXYNOS5433_TMU_EMUL_CON 0x110
#define EXYNOS5433_TMU_PD_DET_EN 0x130
#define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16
#define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23
#define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \
(0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT)
#define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23)
#define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0
#define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1
#define EXYNOS5433_PD_DET_EN 1
/*exynos5440 specific registers*/
#define EXYNOS5440_TMU_S0_7_TRIM 0x000
#define EXYNOS5440_TMU_S0_7_CTRL 0x020
#define EXYNOS5440_TMU_S0_7_DEBUG 0x040
#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
#define EXYNOS5440_TMU_S0_7_TH0 0x110
#define EXYNOS5440_TMU_S0_7_TH1 0x130
#define EXYNOS5440_TMU_S0_7_TH2 0x150
#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
#define EXYNOS5440_TMU_S0_7_IRQ 0x230
/* exynos5440 common registers */
#define EXYNOS5440_TMU_IRQ_STATUS 0x000
#define EXYNOS5440_TMU_PMIN 0x004
#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
/* Exynos7 specific registers */
#define EXYNOS7_THD_TEMP_RISE7_6 0x50
#define EXYNOS7_THD_TEMP_FALL7_6 0x60
#define EXYNOS7_TMU_REG_INTEN 0x110
#define EXYNOS7_TMU_REG_INTPEND 0x118
#define EXYNOS7_TMU_REG_EMUL_CON 0x160
#define EXYNOS7_TMU_TEMP_MASK 0x1ff
#define EXYNOS7_PD_DET_EN_SHIFT 23
#define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1
#define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2
#define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3
#define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4
#define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5
#define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6
#define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7
#define EXYNOS7_EMUL_DATA_SHIFT 7
#define EXYNOS7_EMUL_DATA_MASK 0x1ff
#define MCELSIUS 1000
/**
* struct exynos_tmu_data : A structure to hold the private data of the TMU
driver
* @id: identifier of the one instance of the TMU controller.
* @pdata: pointer to the tmu platform/configuration data
* @base: base address of the single instance of the TMU controller.
* @base_second: base address of the common registers of the TMU controller.
* @irq: irq number of the TMU controller.
* @soc: id of the SOC type.
* @irq_work: pointer to the irq work structure.
* @lock: lock to implement synchronization.
* @clk: pointer to the clock structure.
* @clk_sec: pointer to the clock structure for accessing the base_second.
* @sclk: pointer to the clock structure for accessing the tmu special clk.
* @temp_error1: fused value of the first point trim.
* @temp_error2: fused value of the second point trim.
* @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
* @tmu_initialize: SoC specific TMU initialization method
* @tmu_control: SoC specific TMU control method
* @tmu_read: SoC specific TMU temperature read method
* @tmu_set_emulation: SoC specific TMU emulation setting method
* @tmu_clear_irqs: SoC specific TMU interrupts clearing method
*/
struct exynos_tmu_data {
int id;
struct exynos_tmu_platform_data *pdata;
void __iomem *base;
void __iomem *base_second;
int irq;
enum soc_type soc;
struct work_struct irq_work;
struct mutex lock;
struct clk *clk, *clk_sec, *sclk;
u16 temp_error1, temp_error2;
struct regulator *regulator;
struct thermal_zone_device *tzd;
int (*tmu_initialize)(struct platform_device *pdev);
void (*tmu_control)(struct platform_device *pdev, bool on);
int (*tmu_read)(struct exynos_tmu_data *data);
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
};
static void exynos_report_trigger(struct exynos_tmu_data *p)
{
char data[10], *envp[] = { data, NULL };
struct thermal_zone_device *tz = p->tzd;
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int temp;
unsigned int i;
if (!tz) {
pr_err("No thermal zone device defined\n");
return;
}
thermal_zone_device_update(tz);
mutex_lock(&tz->lock);
/* Find the level for which trip happened */
for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
tz->ops->get_trip_temp(tz, i, &temp);
if (tz->last_temperature < temp)
break;
}
snprintf(data, sizeof(data), "%u", i);
kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp);
mutex_unlock(&tz->lock);
}
/*
* TMU treats temperature as a mapped temperature code.
* The temperature is converted differently depending on the calibration type.
*/
static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp_code = (temp - pdata->first_point_trim) *
(data->temp_error2 - data->temp_error1) /
(pdata->second_point_trim - pdata->first_point_trim) +
data->temp_error1;
break;
case TYPE_ONE_POINT_TRIMMING:
temp_code = temp + data->temp_error1 - pdata->first_point_trim;
break;
default:
temp_code = temp + pdata->default_temp_offset;
break;
}
return temp_code;
}
/*
* Calculate a temperature value from a temperature code.
* The unit of the temperature is degree Celsius.
*/
static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp = (temp_code - data->temp_error1) *
(pdata->second_point_trim - pdata->first_point_trim) /
(data->temp_error2 - data->temp_error1) +
pdata->first_point_trim;
break;
case TYPE_ONE_POINT_TRIMMING:
temp = temp_code - data->temp_error1 + pdata->first_point_trim;
break;
default:
temp = temp_code - pdata->default_temp_offset;
break;
}
return temp;
}
static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
(pdata->min_efuse_value > data->temp_error1) ||
(data->temp_error1 > pdata->max_efuse_value))
data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
if (!data->temp_error2)
data->temp_error2 =
(pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
}
static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
{
struct thermal_zone_device *tz = data->tzd;
const struct thermal_trip * const trips =
of_thermal_get_trip_points(tz);
unsigned long temp;
int i;
if (!trips) {
pr_err("%s: Cannot get trip points from of-thermal.c!\n",
__func__);
return 0;
}
for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
if (trips[i].type == THERMAL_TRIP_CRITICAL)
continue;
temp = trips[i].temperature / MCELSIUS;
if (falling)
temp -= (trips[i].hysteresis / MCELSIUS);
else
threshold &= ~(0xff << 8 * i);
threshold |= temp_to_code(data, temp) << 8 * i;
}
return threshold;
}
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
int ret;
mutex_lock(&data->lock);
clk_enable(data->clk);
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
ret = data->tmu_initialize(pdev);
clk_disable(data->clk);
mutex_unlock(&data->lock);
if (!IS_ERR(data->clk_sec))
clk_disable(data->clk_sec);
return ret;
}
static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
if (data->soc == SOC_ARCH_EXYNOS4412 ||
data->soc == SOC_ARCH_EXYNOS3250)
con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
}
return con;
}
static void exynos_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
mutex_lock(&data->lock);
clk_enable(data->clk);
data->tmu_control(pdev, on);
clk_disable(data->clk);
mutex_unlock(&data->lock);
}
static int exynos4210_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
const struct thermal_trip * const trips =
of_thermal_get_trip_points(tz);
int ret = 0, threshold_code, i;
unsigned long reference, temp;
unsigned int status;
if (!trips) {
pr_err("%s: Cannot get trip points from of-thermal.c!\n",
__func__);
ret = -ENODEV;
goto out;
}
status = readb(data->base + EXYNOS_TMU_REG_STATUS);
if (!status) {
ret = -EBUSY;
goto out;
}
sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
/* Write temperature code for threshold */
reference = trips[0].temperature / MCELSIUS;
threshold_code = temp_to_code(data, reference);
if (threshold_code < 0) {
ret = threshold_code;
goto out;
}
writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
temp = trips[i].temperature / MCELSIUS;
writeb(temp - reference, data->base +
EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
}
data->tmu_clear_irqs(data);
out:
return ret;
}
static int exynos4412_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
const struct thermal_trip * const trips =
of_thermal_get_trip_points(data->tzd);
unsigned int status, trim_info, con, ctrl, rising_threshold;
int ret = 0, threshold_code, i;
unsigned long crit_temp = 0;
status = readb(data->base + EXYNOS_TMU_REG_STATUS);
if (!status) {
ret = -EBUSY;
goto out;
}
if (data->soc == SOC_ARCH_EXYNOS3250 ||
data->soc == SOC_ARCH_EXYNOS4412 ||
data->soc == SOC_ARCH_EXYNOS5250) {
if (data->soc == SOC_ARCH_EXYNOS3250) {
ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
}
ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
}
/* On exynos5420 the triminfo register is in the shared space */
if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
else
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);
/* Write temperature code for rising and falling threshold */
rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
rising_threshold = get_th_reg(data, rising_threshold, false);
writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
data->tmu_clear_irqs(data);
/* if last threshold limit is also present */
for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
if (trips[i].type == THERMAL_TRIP_CRITICAL) {
crit_temp = trips[i].temperature;
break;
}
}
if (i == of_thermal_get_ntrips(data->tzd)) {
pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
__func__);
ret = -EINVAL;
goto out;
}
threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
/* 1-4 level to be assigned in th0 reg */
rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
out:
return ret;
}
static int exynos5433_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
struct thermal_zone_device *tz = data->tzd;
unsigned int status, trim_info;
unsigned int rising_threshold = 0, falling_threshold = 0;
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int temp, temp_hist;
int ret = 0, threshold_code, i, sensor_id, cal_type;
status = readb(data->base + EXYNOS_TMU_REG_STATUS);
if (!status) {
ret = -EBUSY;
goto out;
}
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);
/* Read the temperature sensor id */
sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
>> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id);
/* Read the calibration mode */
writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
>> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
switch (cal_type) {
case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
break;
case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
pdata->cal_type = TYPE_TWO_POINT_TRIMMING;
break;
default:
pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
break;
};
dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
cal_type ? 2 : 1);
/* Write temperature code for rising and falling threshold */
for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
int rising_reg_offset, falling_reg_offset;
int j = 0;
switch (i) {
case 0:
case 1:
case 2:
case 3:
rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0;
falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0;
j = i;
break;
case 4:
case 5:
case 6:
case 7:
rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4;
falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4;
j = i - 4;
break;
default:
continue;
}
/* Write temperature code for rising threshold */
tz->ops->get_trip_temp(tz, i, &temp);
temp /= MCELSIUS;
threshold_code = temp_to_code(data, temp);
rising_threshold = readl(data->base + rising_reg_offset);
rising_threshold |= (threshold_code << j * 8);
writel(rising_threshold, data->base + rising_reg_offset);
/* Write temperature code for falling threshold */
tz->ops->get_trip_hyst(tz, i, &temp_hist);
temp_hist = temp - (temp_hist / MCELSIUS);
threshold_code = temp_to_code(data, temp_hist);
falling_threshold = readl(data->base + falling_reg_offset);
falling_threshold &= ~(0xff << j * 8);
falling_threshold |= (threshold_code << j * 8);
writel(falling_threshold, data->base + falling_reg_offset);
}
data->tmu_clear_irqs(data);
out:
return ret;
}
static int exynos5440_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
unsigned int trim_info = 0, con, rising_threshold;
int ret = 0, threshold_code;
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int crit_temp = 0;
/*
* For exynos5440 soc triminfo value is swapped between TMU0 and
* TMU2, so the below logic is needed.
*/
switch (data->id) {
case 0:
trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
EXYNOS5440_TMU_S0_7_TRIM);
break;
case 1:
trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
break;
case 2:
trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
EXYNOS5440_TMU_S0_7_TRIM);
}
sanitize_temp_error(data, trim_info);
/* Write temperature code for rising and falling threshold */
rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
rising_threshold = get_th_reg(data, rising_threshold, false);
writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
data->tmu_clear_irqs(data);
/* if last threshold limit is also present */
if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) {
threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
/* 5th level to be assigned in th2 reg */
rising_threshold =
threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
}
/* Clear the PMIN in the common TMU register */
if (!data->id)
writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
return ret;
}
static int exynos7_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
struct exynos_tmu_platform_data *pdata = data->pdata;
unsigned int status, trim_info;
unsigned int rising_threshold = 0, falling_threshold = 0;
int ret = 0, threshold_code, i;
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int temp, temp_hist;
unsigned int reg_off, bit_off;
status = readb(data->base + EXYNOS_TMU_REG_STATUS);
if (!status) {
ret = -EBUSY;
goto out;
}
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
if (!data->temp_error1 ||
(pdata->min_efuse_value > data->temp_error1) ||
(data->temp_error1 > pdata->max_efuse_value))
data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
/* Write temperature code for rising and falling threshold */
for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
/*
* On exynos7 there are 4 rising and 4 falling threshold
* registers (0x50-0x5c and 0x60-0x6c respectively). Each
* register holds the value of two threshold levels (at bit
* offsets 0 and 16). Based on the fact that there are atmost
* eight possible trigger levels, calculate the register and
* bit offsets where the threshold levels are to be written.
*
* e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
* [24:16] - Threshold level 7
* [8:0] - Threshold level 6
* e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
* [24:16] - Threshold level 5
* [8:0] - Threshold level 4
*
* and similarly for falling thresholds.
*
* Based on the above, calculate the register and bit offsets
* for rising/falling threshold levels and populate them.
*/
reg_off = ((7 - i) / 2) * 4;
bit_off = ((8 - i) % 2);
tz->ops->get_trip_temp(tz, i, &temp);
temp /= MCELSIUS;
tz->ops->get_trip_hyst(tz, i, &temp_hist);
temp_hist = temp - (temp_hist / MCELSIUS);
/* Set 9-bit temperature code for rising threshold levels */
threshold_code = temp_to_code(data, temp);
rising_threshold = readl(data->base +
EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
rising_threshold |= threshold_code << (16 * bit_off);
writel(rising_threshold,
data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
/* Set 9-bit temperature code for falling threshold levels */
threshold_code = temp_to_code(data, temp_hist);
falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
falling_threshold |= threshold_code << (16 * bit_off);
writel(falling_threshold,
data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
}
data->tmu_clear_irqs(data);
out:
return ret;
}
static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
unsigned int con, interrupt_en;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
(of_thermal_is_trip_valid(tz, 3)
<< EXYNOS_TMU_INTEN_RISE3_SHIFT) |
(of_thermal_is_trip_valid(tz, 2)
<< EXYNOS_TMU_INTEN_RISE2_SHIFT) |
(of_thermal_is_trip_valid(tz, 1)
<< EXYNOS_TMU_INTEN_RISE1_SHIFT) |
(of_thermal_is_trip_valid(tz, 0)
<< EXYNOS_TMU_INTEN_RISE0_SHIFT);
if (data->soc != SOC_ARCH_EXYNOS4210)
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
unsigned int con, interrupt_en, pd_det_en;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
(of_thermal_is_trip_valid(tz, 7)
<< EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
(of_thermal_is_trip_valid(tz, 6)
<< EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
(of_thermal_is_trip_valid(tz, 5)
<< EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
(of_thermal_is_trip_valid(tz, 4)
<< EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
(of_thermal_is_trip_valid(tz, 3)
<< EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
(of_thermal_is_trip_valid(tz, 2)
<< EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
(of_thermal_is_trip_valid(tz, 1)
<< EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
(of_thermal_is_trip_valid(tz, 0)
<< EXYNOS7_TMU_INTEN_RISE0_SHIFT);
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
unsigned int con, interrupt_en;
con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
if (on) {
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
(of_thermal_is_trip_valid(tz, 3)
<< EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
(of_thermal_is_trip_valid(tz, 2)
<< EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
(of_thermal_is_trip_valid(tz, 1)
<< EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
(of_thermal_is_trip_valid(tz, 0)
<< EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
interrupt_en |=
interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
}
static void exynos7_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
unsigned int con, interrupt_en;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
interrupt_en =
(of_thermal_is_trip_valid(tz, 7)
<< EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
(of_thermal_is_trip_valid(tz, 6)
<< EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
(of_thermal_is_trip_valid(tz, 5)
<< EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
(of_thermal_is_trip_valid(tz, 4)
<< EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
(of_thermal_is_trip_valid(tz, 3)
<< EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
(of_thermal_is_trip_valid(tz, 2)
<< EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
(of_thermal_is_trip_valid(tz, 1)
<< EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
(of_thermal_is_trip_valid(tz, 0)
<< EXYNOS7_TMU_INTEN_RISE0_SHIFT);
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
static int exynos_get_temp(void *p, int *temp)
{
struct exynos_tmu_data *data = p;
if (!data || !data->tmu_read)
return -EINVAL;
mutex_lock(&data->lock);
clk_enable(data->clk);
*temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS;
clk_disable(data->clk);
mutex_unlock(&data->lock);
return 0;
}
#ifdef CONFIG_THERMAL_EMULATION
static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int temp)
{
if (temp) {
temp /= MCELSIUS;
if (data->soc != SOC_ARCH_EXYNOS5440) {
val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
}
if (data->soc == SOC_ARCH_EXYNOS7) {
val &= ~(EXYNOS7_EMUL_DATA_MASK <<
EXYNOS7_EMUL_DATA_SHIFT);
val |= (temp_to_code(data, temp) <<
EXYNOS7_EMUL_DATA_SHIFT) |
EXYNOS_EMUL_ENABLE;
} else {
val &= ~(EXYNOS_EMUL_DATA_MASK <<
EXYNOS_EMUL_DATA_SHIFT);
val |= (temp_to_code(data, temp) <<
EXYNOS_EMUL_DATA_SHIFT) |
EXYNOS_EMUL_ENABLE;
}
} else {
val &= ~EXYNOS_EMUL_ENABLE;
}
return val;
}
static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int temp)
{
unsigned int val;
u32 emul_con;
if (data->soc == SOC_ARCH_EXYNOS5260)
emul_con = EXYNOS5260_EMUL_CON;
if (data->soc == SOC_ARCH_EXYNOS5433)
emul_con = EXYNOS5433_TMU_EMUL_CON;
else if (data->soc == SOC_ARCH_EXYNOS7)
emul_con = EXYNOS7_TMU_REG_EMUL_CON;
else
emul_con = EXYNOS_EMUL_CON;
val = readl(data->base + emul_con);
val = get_emul_con_reg(data, val, temp);
writel(val, data->base + emul_con);
}
static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int temp)
{
unsigned int val;
val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG);
val = get_emul_con_reg(data, val, temp);
writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG);
}
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
static int exynos_tmu_set_emulation(void *drv_data, int temp)
{
struct exynos_tmu_data *data = drv_data;
int ret = -EINVAL;
if (data->soc == SOC_ARCH_EXYNOS4210)
goto out;
if (temp && temp < MCELSIUS)
goto out;
mutex_lock(&data->lock);
clk_enable(data->clk);
data->tmu_set_emulation(data, temp);
clk_disable(data->clk);
mutex_unlock(&data->lock);
return 0;
out:
return ret;
}
#else
#define exynos4412_tmu_set_emulation NULL
#define exynos5440_tmu_set_emulation NULL
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
static int exynos_tmu_set_emulation(void *drv_data, int temp)
{ return -EINVAL; }
#endif /* CONFIG_THERMAL_EMULATION */
static int exynos4210_tmu_read(struct exynos_tmu_data *data)
{
int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
/* "temp_code" should range between 75 and 175 */
return (ret < 75 || ret > 175) ? -ENODATA : ret;
}
static int exynos4412_tmu_read(struct exynos_tmu_data *data)
{
return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
}
static int exynos5440_tmu_read(struct exynos_tmu_data *data)
{
return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
}
static int exynos7_tmu_read(struct exynos_tmu_data *data)
{
return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
EXYNOS7_TMU_TEMP_MASK;
}
static void exynos_tmu_work(struct work_struct *work)
{
struct exynos_tmu_data *data = container_of(work,
struct exynos_tmu_data, irq_work);
thermal: exynos: fix IRQ clearing on TMU initialization * Factor out code for clearing raised IRQs from exynos_tmu_work() to exynos_tmu_clear_irqs(). * Add a comment about documentation bugs to exynos_tmu_clear_irqs(). [ The documentation for Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly states that INTCLEAR register has a different placing of bits responsible for FALL IRQs than INTSTAT register. Exynos5420 and Exynos5440 documentation is correct (Exynos4210 doesn't support FALL IRQs at all). ] * Use exynos_tmu_clear_irqs() in exynos_tmu_initialize() instead of open-coded code trying to clear IRQs according to predefined masks. After this change exynos_tmu_initialize() just clears IRQs that are raised like it is already done in exynos_tmu_work(). As a nice side-effect the code now uses the correct offset (16 instead of 12) for bits responsible for clearing FALL IRQs in INTCLEAR register on Exynos3250, Exynos4412 and Exynos5250. * Remove no longer needed intclr_rise_[mask,shift] and intclr_fall_[mask,shift] fields from struct exynos_tmu_registers. * Remove no longer needed defines. This patch has been tested on Exynos4412 and Exynos5420 SoCs. Cc: Amit Daniel Kachhap <amit.daniel@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-10-04 00:17:17 +08:00
unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
/* Find which sensor generated this interrupt */
if (data->soc == SOC_ARCH_EXYNOS5440) {
val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS);
if (!((val_type >> data->id) & 0x1))
goto out;
}
if (!IS_ERR(data->clk_sec))
clk_disable(data->clk_sec);
exynos_report_trigger(data);
mutex_lock(&data->lock);
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
data->tmu_clear_irqs(data);
clk_disable(data->clk);
mutex_unlock(&data->lock);
out:
enable_irq(data->irq);
}
static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
{
unsigned int val_irq;
u32 tmu_intstat, tmu_intclear;
if (data->soc == SOC_ARCH_EXYNOS5260) {
tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
} else if (data->soc == SOC_ARCH_EXYNOS7) {
tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
} else if (data->soc == SOC_ARCH_EXYNOS5433) {
tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
} else {
tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
}
val_irq = readl(data->base + tmu_intstat);
/*
* Clear the interrupts. Please note that the documentation for
* Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
* states that INTCLEAR register has a different placing of bits
* responsible for FALL IRQs than INTSTAT register. Exynos5420
* and Exynos5440 documentation is correct (Exynos4210 doesn't
* support FALL IRQs at all).
*/
writel(val_irq, data->base + tmu_intclear);
}
static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data)
{
unsigned int val_irq;
val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ);
/* clear the interrupts */
writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ);
}
static irqreturn_t exynos_tmu_irq(int irq, void *id)
{
struct exynos_tmu_data *data = id;
disable_irq_nosync(irq);
schedule_work(&data->irq_work);
return IRQ_HANDLED;
}
static const struct of_device_id exynos_tmu_match[] = {
{ .compatible = "samsung,exynos3250-tmu", },
{ .compatible = "samsung,exynos4210-tmu", },
{ .compatible = "samsung,exynos4412-tmu", },
{ .compatible = "samsung,exynos5250-tmu", },
{ .compatible = "samsung,exynos5260-tmu", },
{ .compatible = "samsung,exynos5420-tmu", },
{ .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
{ .compatible = "samsung,exynos5433-tmu", },
{ .compatible = "samsung,exynos5440-tmu", },
{ .compatible = "samsung,exynos7-tmu", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
static int exynos_of_get_soc_type(struct device_node *np)
{
if (of_device_is_compatible(np, "samsung,exynos3250-tmu"))
return SOC_ARCH_EXYNOS3250;
else if (of_device_is_compatible(np, "samsung,exynos4210-tmu"))
return SOC_ARCH_EXYNOS4210;
else if (of_device_is_compatible(np, "samsung,exynos4412-tmu"))
return SOC_ARCH_EXYNOS4412;
else if (of_device_is_compatible(np, "samsung,exynos5250-tmu"))
return SOC_ARCH_EXYNOS5250;
else if (of_device_is_compatible(np, "samsung,exynos5260-tmu"))
return SOC_ARCH_EXYNOS5260;
else if (of_device_is_compatible(np, "samsung,exynos5420-tmu"))
return SOC_ARCH_EXYNOS5420;
else if (of_device_is_compatible(np,
"samsung,exynos5420-tmu-ext-triminfo"))
return SOC_ARCH_EXYNOS5420_TRIMINFO;
else if (of_device_is_compatible(np, "samsung,exynos5433-tmu"))
return SOC_ARCH_EXYNOS5433;
else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
return SOC_ARCH_EXYNOS5440;
else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
return SOC_ARCH_EXYNOS7;
return -EINVAL;
}
static int exynos_of_sensor_conf(struct device_node *np,
struct exynos_tmu_platform_data *pdata)
{
u32 value;
int ret;
of_node_get(np);
ret = of_property_read_u32(np, "samsung,tmu_gain", &value);
pdata->gain = (u8)value;
of_property_read_u32(np, "samsung,tmu_reference_voltage", &value);
pdata->reference_voltage = (u8)value;
of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value);
pdata->noise_cancel_mode = (u8)value;
of_property_read_u32(np, "samsung,tmu_efuse_value",
&pdata->efuse_value);
of_property_read_u32(np, "samsung,tmu_min_efuse_value",
&pdata->min_efuse_value);
of_property_read_u32(np, "samsung,tmu_max_efuse_value",
&pdata->max_efuse_value);
of_property_read_u32(np, "samsung,tmu_first_point_trim", &value);
pdata->first_point_trim = (u8)value;
of_property_read_u32(np, "samsung,tmu_second_point_trim", &value);
pdata->second_point_trim = (u8)value;
of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value);
pdata->default_temp_offset = (u8)value;
of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type);
of_property_read_u32(np, "samsung,tmu_cal_mode", &pdata->cal_mode);
of_node_put(np);
return 0;
}
static int exynos_map_dt_data(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata;
struct resource res;
if (!data || !pdev->dev.of_node)
return -ENODEV;
data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
if (data->id < 0)
data->id = 0;
data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
if (data->irq <= 0) {
dev_err(&pdev->dev, "failed to get IRQ\n");
return -ENODEV;
}
if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
dev_err(&pdev->dev, "failed to get Resource 0\n");
return -ENODEV;
}
data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
if (!data->base) {
dev_err(&pdev->dev, "Failed to ioremap memory\n");
return -EADDRNOTAVAIL;
}
pdata = devm_kzalloc(&pdev->dev,
sizeof(struct exynos_tmu_platform_data),
GFP_KERNEL);
if (!pdata)
return -ENOMEM;
exynos_of_sensor_conf(pdev->dev.of_node, pdata);
data->pdata = pdata;
data->soc = exynos_of_get_soc_type(pdev->dev.of_node);
switch (data->soc) {
case SOC_ARCH_EXYNOS4210:
data->tmu_initialize = exynos4210_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4210_tmu_read;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
break;
case SOC_ARCH_EXYNOS3250:
case SOC_ARCH_EXYNOS4412:
case SOC_ARCH_EXYNOS5250:
case SOC_ARCH_EXYNOS5260:
case SOC_ARCH_EXYNOS5420:
case SOC_ARCH_EXYNOS5420_TRIMINFO:
data->tmu_initialize = exynos4412_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
break;
case SOC_ARCH_EXYNOS5433:
data->tmu_initialize = exynos5433_tmu_initialize;
data->tmu_control = exynos5433_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
break;
case SOC_ARCH_EXYNOS5440:
data->tmu_initialize = exynos5440_tmu_initialize;
data->tmu_control = exynos5440_tmu_control;
data->tmu_read = exynos5440_tmu_read;
data->tmu_set_emulation = exynos5440_tmu_set_emulation;
data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
break;
case SOC_ARCH_EXYNOS7:
data->tmu_initialize = exynos7_tmu_initialize;
data->tmu_control = exynos7_tmu_control;
data->tmu_read = exynos7_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
break;
default:
dev_err(&pdev->dev, "Platform not supported\n");
return -EINVAL;
}
/*
* Check if the TMU shares some registers and then try to map the
* memory of common registers.
*/
if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
data->soc != SOC_ARCH_EXYNOS5440)
return 0;
if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
dev_err(&pdev->dev, "failed to get Resource 1\n");
return -ENODEV;
}
data->base_second = devm_ioremap(&pdev->dev, res.start,
resource_size(&res));
if (!data->base_second) {
dev_err(&pdev->dev, "Failed to ioremap memory\n");
return -ENOMEM;
}
return 0;
}
static struct thermal_zone_of_device_ops exynos_sensor_ops = {
.get_temp = exynos_get_temp,
.set_emul_temp = exynos_tmu_set_emulation,
};
static int exynos_tmu_probe(struct platform_device *pdev)
{
struct exynos_tmu_data *data;
int ret;
data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
platform_set_drvdata(pdev, data);
mutex_init(&data->lock);
data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
&exynos_sensor_ops);
if (IS_ERR(data->tzd)) {
pr_err("thermal: tz: %p ERROR\n", data->tzd);
return PTR_ERR(data->tzd);
}
/*
* Try enabling the regulator if found
* TODO: Add regulator as an SOC feature, so that regulator enable
* is a compulsory call.
*/
data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
if (!IS_ERR(data->regulator)) {
ret = regulator_enable(data->regulator);
if (ret) {
dev_err(&pdev->dev, "failed to enable vtmu\n");
return ret;
}
} else {
dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
}
ret = exynos_map_dt_data(pdev);
if (ret)
goto err_sensor;
INIT_WORK(&data->irq_work, exynos_tmu_work);
data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
if (IS_ERR(data->clk)) {
dev_err(&pdev->dev, "Failed to get clock\n");
ret = PTR_ERR(data->clk);
goto err_sensor;
}
data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
if (IS_ERR(data->clk_sec)) {
if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
dev_err(&pdev->dev, "Failed to get triminfo clock\n");
ret = PTR_ERR(data->clk_sec);
goto err_sensor;
}
} else {
ret = clk_prepare(data->clk_sec);
if (ret) {
dev_err(&pdev->dev, "Failed to get clock\n");
goto err_sensor;
}
}
ret = clk_prepare(data->clk);
if (ret) {
dev_err(&pdev->dev, "Failed to get clock\n");
goto err_clk_sec;
}
switch (data->soc) {
case SOC_ARCH_EXYNOS5433:
case SOC_ARCH_EXYNOS7:
data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
if (IS_ERR(data->sclk)) {
dev_err(&pdev->dev, "Failed to get sclk\n");
goto err_clk;
} else {
ret = clk_prepare_enable(data->sclk);
if (ret) {
dev_err(&pdev->dev, "Failed to enable sclk\n");
goto err_clk;
}
}
break;
default:
break;
};
ret = exynos_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
goto err_sclk;
}
ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
goto err_sclk;
}
exynos_tmu_control(pdev, true);
return 0;
err_sclk:
clk_disable_unprepare(data->sclk);
err_clk:
clk_unprepare(data->clk);
err_clk_sec:
if (!IS_ERR(data->clk_sec))
clk_unprepare(data->clk_sec);
err_sensor:
if (!IS_ERR_OR_NULL(data->regulator))
regulator_disable(data->regulator);
thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
return ret;
}
static int exynos_tmu_remove(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tzd = data->tzd;
thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
exynos_tmu_control(pdev, false);
clk_disable_unprepare(data->sclk);
clk_unprepare(data->clk);
if (!IS_ERR(data->clk_sec))
clk_unprepare(data->clk_sec);
if (!IS_ERR(data->regulator))
regulator_disable(data->regulator);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int exynos_tmu_suspend(struct device *dev)
{
exynos_tmu_control(to_platform_device(dev), false);
return 0;
}
static int exynos_tmu_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
exynos_tmu_initialize(pdev);
exynos_tmu_control(pdev, true);
return 0;
}
static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
exynos_tmu_suspend, exynos_tmu_resume);
#define EXYNOS_TMU_PM (&exynos_tmu_pm)
#else
#define EXYNOS_TMU_PM NULL
#endif
static struct platform_driver exynos_tmu_driver = {
.driver = {
.name = "exynos-tmu",
.pm = EXYNOS_TMU_PM,
.of_match_table = exynos_tmu_match,
},
.probe = exynos_tmu_probe,
.remove = exynos_tmu_remove,
};
module_platform_driver(exynos_tmu_driver);
MODULE_DESCRIPTION("EXYNOS TMU Driver");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:exynos-tmu");